SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 45/509: kernel-cases: sheet-metal convert and unfolded tray cases from #479, #488, #723, #725, #839, #1092, #1285, #1481
Brennen Herbruck771084982306
diff --git a/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.json b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.jsonnew file mode 100644index 0000000000..a3982963c3--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1092",+ "tangency-labs/solidcraft#1314"+ ],+ "what": "an L section modelled with a bend of R2 inside and R4 outside, converted at that bend under a rule of R3: the bend becomes one bend of the rule's radius at the legs' virtual sharp",+ "source": "analytic",+ "method": "T = 2, R = 3, K = 0.5: BD(90) = 2*(R+T) - (pi/2)(R + K t) = 10 - 2*pi = 3.7168. The outer legs are 60 and 40 long (to the outer virtual sharp at the origin), so the flat length is 100 - BD = 96.2832, 50 wide, 2 thick; with K = 0.5 the folded volume is the flat area times t: V = 50*2*(100 - BD)",+ "body_count": 1,+ "volume_mm3": 9628.31853071796+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.json b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.jsonnew file mode 100644index 0000000000..1fda196e8e--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1092-convert-an-L-with-a-modelled-bend-to-the-rules-radius/recipe.json@@ -0,0 +1,147 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "R3",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "3 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "L"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 40+ ],+ [+ 0,+ 4+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 4,+ 4+ ],+ "start": [+ 0,+ 4+ ],+ "end": [+ 4,+ 0+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 4,+ 0+ ],+ [+ 60,+ 0+ ],+ [+ 60,+ 2+ ],+ [+ 4,+ 2+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 4,+ 4+ ],+ "start": [+ 4,+ 2+ ],+ "end": [+ 2,+ 4+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2,+ 4+ ],+ [+ 2,+ 40+ ],+ [+ 0,+ 40+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "L",+ "distance": 50,+ "body_name": "Angle"+ }+ },+ {+ "command": "sheet.convert",+ "params": {+ "body": "Angle",+ "face": [+ 30,+ 2,+ 25+ ],+ "rule": "R3",+ "bends": [+ [+ 1.1716,+ 1.1716,+ 25+ ]+ ]+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.json b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.jsonnew file mode 100644index 0000000000..ec97e45858--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#1285",+ "tangency-labs/solidcraft#1340"+ ],+ "what": "an 80 x 50 x 2 plate with a 40 wide, 30 high wall on part of its front edge, converted at the wall's outside bend edge: refused because the bend's setback used up an edge of a face",+ "source": "analytic",+ "method": "T = 2, R = 2, K = 0.44, BD(90) = 3.4761. One 90 degree bend 40 long; the plate is 50 deep and the wall 30 high to the outer sharp, so the flat is 50 + 30 - BD = 76.524 deep: unfolded it reaches 30 - BD = 26.5239 in front of the plate's edge y = 100 and spans x 0..80, z 0..2",+ "body_count": 1,+ "bbox": {+ "min": [+ 0,+ 73.4761065788307,+ 0+ ],+ "max": [+ 80,+ 150,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.json b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.jsonnew file mode 100644index 0000000000..277db6a48c--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1285-convert-a-bracket-whose-wall-covers-part-of-an-edge/recipe.json@@ -0,0 +1,72 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Test",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.44,+ "gap": "0.5 mm"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 80,+ "width": 50,+ "height": 2,+ "corner": [+ 0,+ 100,+ 0+ ],+ "body_name": "Bracket"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 2,+ "height": 30,+ "corner": [+ 20,+ 100,+ 0+ ],+ "operation": "join",+ "targets": [+ "Bracket"+ ]+ }+ },+ {+ "command": "sheet.convert",+ "params": {+ "body": "Bracket",+ "face": [+ 40,+ 125,+ 0+ ],+ "bends": [+ [+ 40,+ 100,+ 0+ ]+ ]+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.json b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.jsonnew file mode 100644index 0000000000..444249853b--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#1232",+ "tangency-labs/solidcraft#1481"+ ],+ "what": "a 120 x 90 base with two edge flange features (bottom and left edges with a round relief, top and right edges with a square one) over a rule whose relief is a notch, unfolded",+ "source": "analytic",+ "method": "T = 2, R = 1, K = 0.5, BD(90) = 2*3 - pi = 2.8584; each wall's flat reaches 20 - BD = 17.1416 past the base's edge, whatever corner relief a feature chooses (the relief cuts only the corner): bbox x -17.1416..137.1416, y -17.1416..107.1416, z 0..2",+ "body_count": 1,+ "bbox": {+ "min": [+ -17.141592653589793,+ -17.141592653589793,+ 0+ ],+ "max": [+ 137.14159265358978,+ 107.1415926535898,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.json b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.jsonnew file mode 100644index 0000000000..eece732516--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1481-unfold-a-tray-whose-features-choose-their-own-corner-relief/recipe.json@@ -0,0 +1,99 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Sheet 2 mm",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5,+ "gap": "0.5 mm",+ "corner_relief_shape": "notch"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 120,+ 90+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "height": 20,+ "angle": "90 deg",+ "edges": [+ [+ 60,+ 0,+ 2+ ],+ [+ 0,+ 45,+ 2+ ]+ ],+ "corner_relief_shape": "round",+ "corner_relief": "8 mm"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "height": 20,+ "angle": "90 deg",+ "edges": [+ [+ 60,+ 90,+ 2+ ],+ [+ 120,+ 45,+ 2+ ]+ ],+ "corner_relief_shape": "rectangular",+ "corner_relief": "8 mm"+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.json b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.jsonnew file mode 100644index 0000000000..b4941f3a42--- /dev/null+++ b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/expected.json@@ -0,0 +1,21 @@+{+ "sources": [+ "tangency-labs/solidcraft#479"+ ],+ "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape round, unfolded",+ "source": "analytic",+ "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners",+ "body_count": 1,+ "bbox": {+ "min": [+ -17.141592653589793,+ -17.141592653589793,+ 0+ ],+ "max": [+ 137.14159265358978,+ 107.1415926535898,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.json b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.jsonnew file mode 100644index 0000000000..a5512ce731--- /dev/null+++ b/tests/kernel-cases/sheet-metal/479-unfold-a-tray-with-round-relieved-corners/recipe.json@@ -0,0 +1,86 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Sheet 2 mm",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5,+ "gap": "0.5 mm",+ "corner_relief_shape": "round",+ "corner_relief": "8 mm"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 120,+ 90+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "height": 20,+ "angle": 90,+ "edges": [+ [+ 60.0,+ 0,+ 2+ ],+ [+ 120,+ 45.0,+ 2+ ],+ [+ 60.0,+ 90,+ 2+ ],+ [+ 0,+ 45.0,+ 2+ ]+ ]+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.json b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.jsonnew file mode 100644index 0000000000..7d21f6f912--- /dev/null+++ b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/expected.json@@ -0,0 +1,21 @@+{+ "sources": [+ "tangency-labs/solidcraft#488"+ ],+ "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape rectangular, unfolded",+ "source": "analytic",+ "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners",+ "body_count": 1,+ "bbox": {+ "min": [+ -17.141592653589793,+ -17.141592653589793,+ 0+ ],+ "max": [+ 137.14159265358978,+ 107.1415926535898,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.json b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.jsonnew file mode 100644index 0000000000..5c00345c02--- /dev/null+++ b/tests/kernel-cases/sheet-metal/488-unfold-a-tray-with-square-relieved-corners/recipe.json@@ -0,0 +1,86 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Sheet 2 mm",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5,+ "gap": "0.5 mm",+ "corner_relief_shape": "rectangular",+ "corner_relief": "8 mm"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 120,+ 90+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "height": 20,+ "angle": 90,+ "edges": [+ [+ 60.0,+ 0,+ 2+ ],+ [+ 120,+ 45.0,+ 2+ ],+ [+ 60.0,+ 90,+ 2+ ],+ [+ 0,+ 45.0,+ 2+ ]+ ]+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.json b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.jsonnew file mode 100644index 0000000000..4c3fed6419--- /dev/null+++ b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#723",+ "tangency-labs/solidcraft#809",+ "tangency-labs/solidcraft#1797",+ "tangency-labs/solidcraft#1799"+ ],+ "what": "a 120 x 90 tray with four 20 mm 90 degree flanges and corner relief shape tear, unfolded",+ "source": "analytic",+ "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2*3 - pi = 2.8584, so the flat reaches 20 - BD = 17.1416 past each edge of the base: bbox x from -17.1416 to 137.1416, y from -17.1416 to 107.1416, z 0..2 (the base keeps its place); the corner relief changes the outline only inside the corners",+ "body_count": 1,+ "bbox": {+ "min": [+ -17.141592653589793,+ -17.141592653589793,+ 0+ ],+ "max": [+ 137.14159265358978,+ 107.1415926535898,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.json b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.jsonnew file mode 100644index 0000000000..fe3f005084--- /dev/null+++ b/tests/kernel-cases/sheet-metal/723-unfold-a-tray-with-torn-corners/recipe.json@@ -0,0 +1,85 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Sheet 2 mm",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5,+ "gap": "0.5 mm",+ "corner_relief_shape": "tear"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 120,+ 90+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "height": 20,+ "angle": 90,+ "edges": [+ [+ 60.0,+ 0,+ 2+ ],+ [+ 120,+ 45.0,+ 2+ ],+ [+ 60.0,+ 90,+ 2+ ],+ [+ 0,+ 45.0,+ 2+ ]+ ]+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.json b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.jsonnew file mode 100644index 0000000000..2278ee401a--- /dev/null+++ b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#647",+ "tangency-labs/solidcraft#725",+ "tangency-labs/solidcraft#1285",+ "tangency-labs/solidcraft#1340"+ ],+ "what": "a 100 x 60 x 30 box shelled to 2 mm, converted to sheet metal by its four bottom edges and unfolded",+ "source": "analytic",+ "method": "T = 2, R = 2, K = 0.44: BD(90) = 2*4 - (pi/2)(2 + 0.88) = 3.4761. The walls' outer legs are 30 long, so the flat reaches 30 - BD = 26.5239 past each edge of the 100 x 60 base (flat 160 - 2*BD = 153.048 by 113.048); the base keeps its place z 0..2",+ "body_count": 1,+ "bbox": {+ "min": [+ -26.523893421169305,+ -26.523893421169305,+ 0+ ],+ "max": [+ 126.5238934211693,+ 86.5238934211693,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.json b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.jsonnew file mode 100644index 0000000000..9d15158bb8--- /dev/null+++ b/tests/kernel-cases/sheet-metal/725-convert-a-shelled-tray-and-unfold-it/recipe.json@@ -0,0 +1,77 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Rule",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.44+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 100,+ "width": 60,+ "height": 30,+ "body_name": "Tray"+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ 50,+ 30,+ 30+ ]+ ],+ "thickness": 2+ }+ },+ {+ "command": "sheet.convert",+ "params": {+ "body": "Tray",+ "face": [+ 50,+ 30,+ 0+ ],+ "bends": [+ [+ 50,+ 0,+ 0+ ],+ [+ 100,+ 30,+ 0+ ],+ [+ 50,+ 60,+ 0+ ],+ [+ 0,+ 30,+ 0+ ]+ ]+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.json b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.jsonnew file mode 100644index 0000000000..60ba07fc3b--- /dev/null+++ b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/expected.json@@ -0,0 +1,21 @@+{+ "sources": [+ "tangency-labs/solidcraft#839"+ ],+ "what": "a 200 x 100 plate with its corners rounded 8 and one 40 mm inside flange on its bottom edge, unfolded: the trim made the outline's arcs chords",+ "source": "analytic",+ "method": "T = 2, R = 1, K = 0.5, BD(90) = 2.8584: the flat reaches 40 - BD = 37.1416 below the plate's bottom edge; the plate itself spans x 0..200 up to y = 100 (its top corners are the rounded ones); z 0..2",+ "body_count": 1,+ "bbox": {+ "min": [+ 0,+ -37.1415926535898,+ 0+ ],+ "max": [+ 200,+ 100,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.json b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.jsonnew file mode 100644index 0000000000..c6f6871e57--- /dev/null+++ b/tests/kernel-cases/sheet-metal/839-flange-on-a-plate-with-rounded-corners-unfolded/recipe.json@@ -0,0 +1,183 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 2",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Plate"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8,+ 0+ ],+ [+ 192,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 192,+ 0+ ],+ "end": [+ 200,+ 8+ ],+ "through": [+ 197.6568542495,+ 2.3431457505+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 200,+ 8+ ],+ [+ 200,+ 92+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 200,+ 92+ ],+ "end": [+ 192,+ 100+ ],+ "through": [+ 197.6568542495,+ 97.6568542495+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 192,+ 100+ ],+ [+ 8,+ 100+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 8,+ 100+ ],+ "end": [+ 0,+ 92+ ],+ "through": [+ 2.3431457505,+ 97.6568542495+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 92+ ],+ [+ 0,+ 8+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0,+ 8+ ],+ "end": [+ 8,+ 0+ ],+ "through": [+ 2.3431457505,+ 2.3431457505+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Plate"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "edges": [+ [+ 100,+ 0,+ 2+ ]+ ],+ "height": 40,+ "angle": 90,+ "position": "inside"+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of file