SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Booleans: small tools in large bodies are traced at their own scale (#559) (#946)
bherbruck78d9aa01534f
diff --git a/apps/solidcraft-cli/tests/action_matrix.rs b/apps/solidcraft-cli/tests/action_matrix.rsindex dbb1d94c97..5ae35869d1 100644--- a/apps/solidcraft-cli/tests/action_matrix.rs+++ b/apps/solidcraft-cli/tests/action_matrix.rs@@ -1051,6 +1051,18 @@ fn a_through_hole_into_a_shelled_box_rim() {);}+/// #559: a 6 mm hole drilled at an angle through a 920 mm prism, its through-all tool nearly+/// 1.9 m long beside a thin bar it misses. The bar's cut came out empty: the tool filled too+/// little of its own box for the sampled shortcut, and the boolean's tolerances (from the+/// tool's length) were wider than the hole.+#[test]+fn an_oblique_through_hole_beside_a_thin_bar() {+ reproduces(+ Some("examples/regressions/oblique_cut_of_cylinder.json"),+ json!([{"command": "solid.hole", "params": {"diameter": 6.0, "position": [296.66666666666663, -458.66666666666663, 848.7633333333333]}}]),+ );+}+#[test]fn a_hole_through_a_sheet_metal_base() {let mut c: Vec<Value> = rectangle(json!("XY"), [0., 0.], [60., 40.]).into();diff --git a/crates/kernel/src/ops.rs b/crates/kernel/src/ops.rsindex eb6016c467..635413e800 100644--- a/crates/kernel/src/ops.rs+++ b/crates/kernel/src/ops.rs@@ -101,7 +101,12 @@ fn overlap(let bx = inner.bounds();let s = bx.size();let (mut n, mut hit) = (0usize, 0usize);- for i in 1..=2000 {+ // A slender body lying across its box (a long hole tool drilled at an angle) fills+ // little of it: the samples go on past the first 2000 until enough land inside.+ for i in 1..=64_000 {+ if i > 2000 && n >= 50 {+ break;+ }let p = bx.min + Vec3::new(s.x * halton(i, 2), s.y * halton(i, 3), s.z * halton(i, 5));if !inner_i.contains(p) {continue;@@ -648,6 +653,61 @@ fn boolean_whole(a: &Body, b: &Body, op: BoolOp) -> Result<Option<Body>> {let mut empty_votes = 0;let mut empty_diagnostics = crate::BooleanDiagnostics::default();let keep: Vec<Vec<Vec3>> = a.split_keep().iter().chain(b.split_keep()).cloned().collect();+ // The tolerances below follow the larger body. Where the bodies meet in a region much+ // smaller than that (a hole a few millimetres across drilled through a long part, whose tool+ // is longer still), they are as coarse as the tool itself: its intersection curves are+ // traced at a step wider than the hole, and the cut comes out empty or fails. When those+ // tries fail, the same boolean is asked again at tolerances (and shifts) scaled to where the+ // bodies meet. Its result is checked as the others are, and held to the retry guard.+ // Bodies in several shells are retried a piece at a time (see [`boolean`]), where each+ // piece gets this pass of its own.+ let fine_tols: Vec<f64> = match &meshes {+ (Some(ma), Some(mb)) if a.solid.boundaries().len() == 1 && b.solid.boundaries().len() == 1 => {+ let (ba, bb) = (ma.bounds(), mb.bounds());+ let s = solidcraft_geom::Aabb3 { min: ba.min.max(bb.min), max: ba.max.min(bb.max) }.size();+ // The thinner operand's thickness (twice its volume over its area: a plate's+ // thickness, a rod's radius) bounds what the tolerance must resolve as well.+ let thickness = |m: &solidcraft_geom::Mesh| {+ let x = m.measure();+ if x.area > 0.0 { 2.0 * x.volume.abs() / x.area } else { f64::INFINITY }+ };+ let feature = s.x.min(s.y).min(s.z).min(thickness(ma)).min(thickness(mb)).max(size * 1e-4);+ if feature > 0.0 && feature * 2e-3 < size * 2.5e-4 { vec![(feature * 2e-3).max(1e-6), (feature * 5e-4).max(1e-6)] } else { Vec::new() }+ }+ _ => Vec::new(),+ };+ let fine = |last: &mut String| -> Option<Body> {+ let feature = fine_tols.first().map(|t| t / 2e-3)?;+ // Unshifted, then once shifted: each try at these tolerances costs many coarser ones.+ for (attempt, j) in JITTER.iter().enumerate().take(2) {+ let shift = mt::Vector3::new(j[0], j[1], j[2]) * (feature * 0.01);+ for &tol in &fine_tols {+ match truck_boolean(a, b, op, if attempt > 0 { Some(shift) } else { None }, tol) {+ Ok((s, _)) if s.boundaries().is_empty() || s.face_iter().next().is_none() => *last = "empty result".into(),+ Ok((s, h)) => match guard("boolean result", || recorded::truck_result(s, h, size, &keep, &counts)) {+ Ok(body) => {+ let (ok, v) = check(&body);+ if ok {+ let mut event = BooleanFallback::new(if attempt > 0 {+ BooleanStrategy::ShiftedOperands+ } else {+ BooleanStrategy::RefinedTolerance+ });+ event.translation_mm = Vec3::new(j[0], j[1], j[2]).len() * (feature * 0.01);+ event.tolerance_mm = tol;+ record(event);+ return Some(body);+ }+ *last = format!("implausible result volume {v:.4}");+ }+ Err(e) => *last = e.to_string(),+ },+ Err(e) => *last = e.to_string(),+ }+ }+ }+ None+ };for (attempt, j) in JITTER.iter().enumerate() {let shift = mt::Vector3::new(j[0], j[1], j[2]) * (size * 0.01);for k in [2e-3, 5e-4] {@@ -693,6 +753,9 @@ fn boolean_whole(a: &Body, b: &Body, op: BoolOp) -> Result<Option<Body>> {}}if empty_votes >= 2 && op != BoolOp::Union {+ if let Some(body) = fine(&mut last) {+ return Ok(Some(body));+ }merge(empty_diagnostics);return Ok(None);}@@ -750,6 +813,11 @@ fn boolean_whole(a: &Body, b: &Body, op: BoolOp) -> Result<Option<Body>> {Err(e) => last = format!("{last}; nudged: {e}"),}}+ // The tries at the meeting region's scale come last, after every strategy that answered+ // before them, so a result any of those gave is kept as it was.+ if let Some(body) = fine(&mut last) {+ return Ok(Some(body));+ }match doubted {Some(r) => {let mut event = BooleanFallback::new(BooleanStrategy::UnverifiedShortcut);diff --git a/tests/action_matrix/baseline.json b/tests/action_matrix/baseline.jsonindex a4728f80d6..6422fa7b22 100644--- a/tests/action_matrix/baseline.json+++ b/tests/action_matrix/baseline.json@@ -200,7 +200,7 @@"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F10:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F10:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -209,7 +209,7 @@"Lid/F10:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F10:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F10:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F10:-y|F1:+z#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -219,7 +219,7 @@"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F11:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F11:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+y|F1:+z#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+y|F4:side:l6#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -228,7 +228,7 @@"Lid/F11:+z": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F11:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F11:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F11:-y|F1:+z#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:-y|F4:side:l6#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -387,15 +387,15 @@"Lid/F6:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F7:+x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F7:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",- "Lid/F8:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F8:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F8:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F8:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F9:+y": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",@@ -404,7 +404,7 @@"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:-x": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude !face.hole !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Lid/F9:-y": "face.angle_plane !face.draft_neutral !face.extrude face.hole !face.offset_plane !face.press_pull face.shell !face.sketch","Lid/body": "body.copy body.mirror body.move body.pattern","Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point","Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",@@ -718,7 +718,7 @@"Body2/F3:-z|F4:side#2": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body2/F4:side#1": "curved.axis curved.tangent_plane","Body2/F4:side#2": "curved.axis curved.tangent_plane",- "Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body2/F6:blend:F3:+z|F3:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body2/body": "body.copy body.mirror body.move body.pattern","Body2/v[F3:+x & F3:+y & F3:+z]": "vertex.plane_three_points vertex.point","Body2/v[F3:+x & F3:+y & F3:-z]": "vertex.plane_three_points vertex.point",@@ -846,7 +846,7 @@"Body1/F1:+y|F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F1:+y|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F1:+y|F1:-z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F1:+z|F1:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F1:+z|F1:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F1:+z|F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -891,20 +891,20 @@"Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:6": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:inner:F1:-z#[F5:rest:side:4,F5:rest:side:5,F5:rest:side:6,F5:rest:side:7]|F5:rest:side:7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:blend:F1:+z|F2:inner:F1:+x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:blend:F1:+z|F2:inner:F1:+y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:blend:F1:+z|F2:inner:F1:-x#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",+ "Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/F3:blend:F1:+z|F2:inner:F1:-y#[F1:+z]|F3:inner:F1:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",- "Body1/F4:hole:base": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:inner:F1:+z": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",+ "Body1/F4:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F4:hole:base|F4:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:hole:base|F4:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:hole:side:0": "curved.axis curved.tangent_plane",@@ -915,7 +915,7 @@"Body1/F4:post:side:0|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:post:side:1": "curved.axis curved.tangent_plane","Body1/F4:post:side:1|F4:post:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F4:post:top": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:post:top": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:rest:side:0": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/F5:rest:side:0|F5:rest:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:rest:side:0|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -923,7 +923,7 @@"Body1/F5:rest:side:1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/F5:rest:side:1|F5:rest:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:rest:side:1|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:rest:side:2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",+ "Body1/F5:rest:side:2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/F5:rest:side:2|F5:rest:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:rest:side:2|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:rest:side:3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",@@ -940,8 +940,8 @@"Body1/F5:rest:side:6|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:rest:side:7": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/F5:rest:side:7|F5:rest:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:rest:top": "face.angle_plane face.extrude !face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",- "Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:rest:top": "face.angle_plane face.extrude face.hole face.midplane face.offset_plane face.press_pull !face.shell face.sketch",+ "Body1/F6:arm:base": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:base|F6:arm:side:1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:base|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:base|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -950,18 +950,18 @@"Body1/F6:arm:side:1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:side:1|F6:arm:side:2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:1|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F6:arm:side:2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:side:2|F6:arm:side:3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:2|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:side:3|F6:arm:side:4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:3|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F6:arm:side:4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:side:4|F6:arm:side:5": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:4|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:arm:side:5": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:arm:side:5|F6:arm:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F6:arm:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/body": "body.copy body.mirror body.move body.pattern","Body1/v[F1:+x & F1:+y & F1:+z]": "vertex.plane_three_points vertex.point","Body1/v[F1:+x & F1:+y & F1:-z]": "vertex.plane_three_points vertex.point",@@ -1297,7 +1297,7 @@"Body1/F2:top#[F2:side:l3,F4:side:l3]|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top#[F2:side:l3,F4:side:l3]|F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",- "Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/body": "body.copy body.mirror body.move body.pattern","Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F2:start#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point","Body1/v[F2:side:l2#[F2:side:l3,F4:side:l3] & F2:side:l3 & F6:blend:F2:side:l3|F2:top#[F2:side:l3,F4:side:l3]]": "vertex.plane_three_points vertex.point",@@ -1498,11 +1498,11 @@"Enclosure/F6:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Enclosure/F6:side:l1|F6:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project","Enclosure/F6:side:l1|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project",- "Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Enclosure/F6:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Enclosure/F6:side:l2|F6:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Enclosure/F6:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.extrude+edit face.hole face.offset_plane face.press_pull face.shell face.sketch","Enclosure/F6:side:l3|F6:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",- "Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Enclosure/F6:side:l4": "face.angle_plane face.angle_plane+edit !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Enclosure/F7:hole:base": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Enclosure/F7:hole:base|F7:hole:side:0": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit","Enclosure/F7:hole:base|F7:hole:side:1": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",@@ -1668,7 +1668,7 @@"Body1/F11:side:l5|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F11:side:l5|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit","Body1/F11:side:l5|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F11:side:l6": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F11:side:l6|F11:side:l7": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F11:side:l6|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F11:side:l6|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -1678,7 +1678,7 @@"Body1/F11:side:l7|F11:side:l8": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F11:side:l7|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit","Body1/F11:side:l7|F4:inner:F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F11:side:l8": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F11:side:l8|F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project","Body1/F11:side:l8|F2:side:l2~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project","Body1/F11:side:l8|F4:inner:F2:side:l2~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -2654,7 +2654,7 @@"Case/F11:side:bs_hole#[F4:inner:F2:start]#1|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project","Case/F11:side:bs_hole#[F4:inner:F2:start]#2": "curved.axis curved.tangent_plane","Case/F11:side:bs_hole#[F4:inner:F2:start]#2|F4:inner:F2:start#[F11:side:bs_hole]": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Case/F11:top": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Case/F11:top": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Case/F12:face:103": "curved.axis curved.tangent_plane","Case/F12:face:103|F12:face:147": "edge.chamfer edge.fillet edge.normal_plane edge.project","Case/F12:face:104": "curved.axis curved.tangent_plane",@@ -2679,7 +2679,7 @@"Case/F12:face:113|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit","Case/F12:face:114": "curved.axis curved.tangent_plane","Case/F12:face:114|F12:face:149": "edge.chamfer edge.fillet edge.normal_plane edge.normal_plane+edit edge.project",- "Case/F12:face:147": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch",+ "Case/F12:face:147": "!face.extrude face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Case/F12:face:148": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell !face.sketch","Case/F12:face:149": "!face.extrude !face.hole face.midplane !face.offset_plane !face.press_pull face.shell face.shell+edit !face.sketch","Case/F12:face:28": "curved.axis curved.tangent_plane curved.tangent_plane+edit",@@ -4888,7 +4888,7 @@"Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l1|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project","Box/F3:inner:F2:side:l4|F5:blend:F3:inner:F2:side:l3|F3:inner:F2:side:l4": "edge.axis edge.normal_plane edge.project","Box/F3:inner:F2:side:l4|F6:blend:F3:inner:F2:side:l4|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",- "Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch",+ "Box/F3:inner:F2:start": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l1|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project","Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l2|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project","Box/F3:inner:F2:start|F6:blend:F3:inner:F2:side:l3|F3:inner:F2:start": "edge.axis edge.normal_plane edge.project",@@ -5542,7 +5542,7 @@"Tee/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project","Tee/F4:side:c1#2": "curved.axis curved.tangent_plane","Tee/F4:side:c1#2|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Tee/F4:top": "face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Tee/F4:top": "face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Tee/F4:top|F8:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project","Tee/F4:top|F8:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project","Tee/F6:side:c1#1": "curved.axis curved.tangent_plane",@@ -9529,7 +9529,7 @@"Slat/F2:side:a1|F2:side:l3": "edge.axis edge.normal_plane edge.project","Slat/F2:side:a1|F2:start": "edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:a1|F2:top": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Slat/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Slat/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -9539,11 +9539,11 @@"Slat/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:l2|F4:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:l2|F4:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Slat/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Slat/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",- "Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Slat/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Slat/F4:side:c1#1": "curved.axis curved.tangent_plane","Slat/F4:side:c1#1|F4:top": "edge.chamfer edge.fillet edge.normal_plane edge.project","Slat/F4:side:c1#2": "curved.axis curved.tangent_plane",@@ -9709,7 +9709,7 @@"Lid/F10:+x|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+x|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F10:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F10:+y|F10:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -9718,7 +9718,7 @@"Lid/F10:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F10:+z|F10:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F10:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F10:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:-y,F4:side:l5,F4:side:l6,F4:side:l8,F5:+x,F5:+y,F5:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:-y|F4:side:l6#[F10:-y,F4:side:l5]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F10:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -9728,7 +9728,7 @@"Lid/F11:+x|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+x|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+x|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F11:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F11:+y|F11:+z": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F11:+y,F1:+x,F1:+y,F1:-x,F1:-y,F2:blend:F1:+x|F1:+y,F2:blend:F1:+x|F1:-y,F2:blend:F1:+y|F1:-x,F2:blend:F1:-x|F1:-y,F4:side:l1,F4:side:l2,F4:side:l3,F4:side:l4,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:-x,F5:-y,F6:+x,F6:+y,F6:-x,F6:-y,F7:+x,F7:-x,F9:+y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+y|F4:side:l6#[F10:+y,F4:side:l7]#[F11:+y,F4:side:l7]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -9737,7 +9737,7 @@"Lid/F11:+z": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F11:+z|F11:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:+z|F5:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F11:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F11:-y|F1:+z#[F4:side:l5,F4:side:l6,F4:side:l7,F4:side:l8,F5:+x,F5:+y,F5:-x,F5:-y]#[F10:+y,F11:-y,F4:side:l6,F5:-x]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:-y|F4:side:l6#[F10:+y,F4:side:l7]#[F10:+y,F11:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F11:-y|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -9896,15 +9896,15 @@"Lid/F6:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Lid/F7:+x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F7:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",- "Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F8:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F8:+y|F8:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:+y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Lid/F8:-x|F8:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F8:-x|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F8:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Lid/F8:-y|F9:+z#[F8:+y,F8:-x,F8:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F9:+y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F9:+y|F9:+z#[F9:+y,F9:-x,F9:-y]": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:+y|F9:-x": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:+z#[F8:+y,F8:-x,F8:-y]": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",@@ -9913,7 +9913,7 @@"Lid/F9:+z#[F9:+y,F9:-x,F9:-y]|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Lid/F9:-x": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Lid/F9:-x|F9:-y": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Lid/F9:-y": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Lid/body": "body.copy body.mirror body.move body.pattern","Lid/v[F10:+x & F10:+y & F10:+z]": "vertex.plane_three_points vertex.point","Lid/v[F10:+x & F10:+y & F4:top]": "vertex.plane_three_points vertex.point",@@ -10022,31 +10022,31 @@"design": "load"},"regressions/loft_cut_beside_round_hole": {- "Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l3|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",- "Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:top|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:bottom": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F4:bottom|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -10055,32 +10055,32 @@"Body1/F4:bottom|F9:side:l2": "edge.axis edge.normal_plane edge.project","Body1/F4:bottom|F9:side:l3": "edge.axis !edge.chamfer !edge.fillet edge.normal_plane edge.project","Body1/F4:bottom|F9:side:l4": "edge.axis edge.normal_plane edge.project",- "Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",- "Body1/F6:bottom": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F4:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F6:bottom": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F6:bottom|F6:side:c1#1": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:bottom|F6:side:c1#2": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F6:side:c1#1": "curved.axis curved.tangent_plane","Body1/F6:side:c1#2": "curved.axis curved.tangent_plane",- "Body1/F9:end": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F9:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F9:end|F9:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F9:end|F9:side:l2": "edge.axis edge.normal_plane edge.project","Body1/F9:end|F9:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F9:end|F9:side:l4": "edge.axis edge.normal_plane edge.project",- "Body1/F9:side:l1": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F9:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F9:side:l1|F9:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F9:side:l1|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F9:side:l2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F9:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F9:side:l2|F9:side:l3": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F9:side:l3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F9:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F9:side:l3|F9:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F9:side:l4": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",+ "Body1/F9:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull !face.shell face.sketch","Body1/body": "body.copy body.mirror body.move body.pattern","Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point","Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",@@ -10118,17 +10118,17 @@"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",+ "ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull face.shell face.sketch","ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","ClipBody/F4:side:l3|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l3|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "ClipBody/F4:side:l4": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","ClipBody/F4:side:l4|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:top": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","ClipBody/body": "body.copy body.mirror body.move body.pattern",@@ -10187,11 +10187,11 @@"ClipBody/F4:bottom|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:bottom|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:bottom|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull face.shell face.sketch",+ "ClipBody/F4:side:l1": "face.angle_plane face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","ClipBody/F4:side:l1|F4:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l1|F4:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l1|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "ClipBody/F4:side:l2": "face.angle_plane face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","ClipBody/F4:side:l2|F4:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l2|F4:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","ClipBody/F4:side:l3": "face.angle_plane face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",@@ -10223,7 +10223,7 @@"Tool/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:side:l1|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Tool/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Tool/F2:side:l2|F2:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",@@ -10234,7 +10234,7 @@"Tool/F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:side:l4|F4:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Tool/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull !face.shell face.sketch",- "Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude !face.hole face.offset_plane !face.press_pull !face.shell face.sketch",+ "Tool/F4:side:l1": "face.angle_plane !face.draft_neutral !face.extrude face.hole face.offset_plane !face.press_pull !face.shell face.sketch","Tool/body": "body.copy body.mirror body.move body.pattern","Tool/v[F2:bottom & F2:side:l1 & F2:side:l2]": "vertex.plane_three_points vertex.point","Tool/v[F2:bottom & F2:side:l1 & F4:side:l1]": "vertex.plane_three_points vertex.point",@@ -10500,31 +10500,31 @@"design": "load"},"regressions/shallow_loft_cut_from_top_face": {- "Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l1": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l1|F2:side:l2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l1|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l2": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l2|F2:side:l3~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l2|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l3": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l3|F2:side:l4~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:side:l4~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:side:l4~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l3|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:side:l4": "face.angle_plane !face.draft_neutral face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:side:l4|F2:start": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l4|F2:top~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l4|F2:top~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:side:l4|F2:top~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",- "Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:start": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F2:top": "face.angle_plane !face.draft_neutral face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F2:top|F5:side:l1~1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F5:side:l1~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F5:side:l1~3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",@@ -10535,19 +10535,19 @@"Body1/F2:top|F5:side:l3~2": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F2:top|F5:side:l4~1": "edge.axis edge.normal_plane edge.project","Body1/F2:top|F5:side:l4~2": "edge.axis edge.normal_plane edge.project",- "Body1/F5:end": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:end": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:end|F5:side:l1": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:end|F5:side:l2": "edge.axis edge.normal_plane edge.project","Body1/F5:end|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:end|F5:side:l4": "edge.axis edge.normal_plane edge.project",- "Body1/F5:side:l1": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:side:l1": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:side:l1|F5:side:l2": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:side:l1|F5:side:l4": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:side:l2": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:side:l2": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:side:l2|F5:side:l3": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:side:l3": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:side:l3": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:side:l3|F5:side:l4": "edge.axis !edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:side:l4": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:side:l4": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/body": "body.copy body.mirror body.move body.pattern","Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point","Body1/v[F2:side:l1 & F2:side:l2 & F2:top]": "vertex.plane_three_points vertex.point",@@ -10770,20 +10770,20 @@"Body1/F3:bore:side:[email protected]": "curved.axis curved.tangent_plane","Body1/F3:bore:side:[email protected]|F3:cbore:[email protected]": "edge.chamfer edge.fillet edge.fillet+edit edge.normal_plane edge.project","Body1/F3:bore:side:1|F3:cbore:base": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:cbore:base": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",- "Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch",+ "Body1/F3:cbore:base": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",+ "Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.midplane+edit face.offset_plane face.press_pull face.shell face.shell+edit face.sketch","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:cbore:[email protected]": "face.extrude face.extrude+edit !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:cbore:[email protected]": "face.extrude face.extrude+edit face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",- "Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit",+ "Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch face.sketch+edit","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.fillet+edit edge.normal_plane edge.project","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F3:cbore:[email protected]": "face.extrude face.hole face.midplane face.offset_plane face.press_pull face.shell face.sketch","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F3:cbore:[email protected]": "face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",+ "Body1/F3:cbore:[email protected]": "face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:cbore:[email protected]|F3:cbore:side:[email protected]": "edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F3:cbore:base|F3:cbore:side:0": "edge.chamfer edge.chamfer+edit edge.fillet edge.normal_plane edge.project",@@ -10800,14 +10800,14 @@"Body1/F3:cbore:side:[email protected]": "curved.axis curved.axis+edit curved.tangent_plane","Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane curved.tangent_plane+edit","Body1/F3:cbore:side:[email protected]": "curved.axis curved.tangent_plane",- "Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch",+ "Body1/F5:blend:F2:side:l1|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.press_pull+edit face.shell face.sketch","Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l2|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project","Body1/F5:blend:F2:side:l1|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project",- "Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:blend:F2:side:l2|F2:top": "face.angle_plane face.angle_plane+edit face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:blend:F2:side:l2|F2:top|F5:blend:F2:side:l3|F2:top": "edge.axis edge.axis+edit edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",- "Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.press_pull face.shell face.sketch",+ "Body1/F5:blend:F2:side:l3|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.press_pull face.shell face.sketch","Body1/F5:blend:F2:side:l3|F2:top|F5:blend:F2:side:l4|F2:top": "edge.axis edge.chamfer edge.fillet edge.normal_plane edge.project edge.project+edit",- "Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude !face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch",+ "Body1/F5:blend:F2:side:l4|F2:top": "face.angle_plane face.extrude face.hole face.offset_plane face.offset_plane+edit face.press_pull face.shell face.sketch","Body1/body": "body.copy body.mirror body.move body.move+edit body.pattern","Body1/v[F2:side:l1 & F2:side:l2 & F2:start]": "vertex.plane_three_points vertex.point","Body1/v[F2:side:l1 & F2:side:l2 & F5:blend:F2:side:l1|F2:top & F5:blend:F2:side:l2|F2:top]": "vertex.plane_three_points vertex.point",