SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Sheet metal: fold a second tab on a line, and a tab on an L's inside edge (#638, #639) (#963)
bherbruck7bed28752ea1
diff --git a/crates/doc/src/sheet.rs b/crates/doc/src/sheet.rsindex 6ec2370de4..251729d3ac 100644--- a/crates/doc/src/sheet.rs+++ b/crates/doc/src/sheet.rs@@ -33,6 +33,8 @@ const MAX_FLAT_WORK: usize = 500_000_000;/// Starts the warning a fold gives when its `fixed` point touches no material: a recompute keeps/// the side the point lies on, and the `sheet.fold` command refuses such a point (#263).+/// Tabs folded on one line whose material beyond the bend joins again.+const FOLD_TABS_REJOIN: &str = "not supported yet: folding tabs that join again beyond the bend";pub const FOLD_FIXED_OFF_SHEET: &str = "the fold's fixed point is not on the sheet";fn flat_budget_error() -> DocError {@@ -2636,6 +2638,30 @@ impl SheetBody {flip: bool,fixed: Option<Vec3>,warning: &mut Option<String>,+ ) -> Result<usize> {+ match self.fold_side(a, b, angle, radius, position, flip, fixed, warning, false) {+ // The tabs the line folds can't take the side beyond them along, since it joins+ // the side that stays through other material (a tab on an inside edge of an L,+ // the fixed point on the far leg): the tabs' own ends fold instead, and the+ // fixed point's material still stays (#639).+ Err(DocError::Invalid(m)) if m == FOLD_TABS_REJOIN => self.fold_side(a, b, angle, radius, position, flip, fixed, warning, true),+ r => r,+ }+ }++ /// [`Self::add_fold`]; `other_side` moves the side the fixed point would keep.+ #[allow(clippy::too_many_arguments)]+ fn fold_side(+ &mut self,+ a: Vec3,+ b: Vec3,+ angle: f64,+ radius: f64,+ position: &str,+ flip: bool,+ fixed: Option<Vec3>,+ warning: &mut Option<String>,+ other_side: bool,) -> Result<usize> {if !(angle > 1e-6 && angle <= std::f64::consts::PI - 1e-6) {return Err(DocError::Invalid("the fold angle must be between 0 and 180°".into()));@@ -2704,7 +2730,7 @@ impl SheetBody {}(None, None) => side_area(n) <= side_area(n * -1.0),};- if !moves_n {+ if moves_n == other_side {n = n * -1.0;}let l = a2.dot(n);@@ -2740,6 +2766,12 @@ impl SheetBody {// Separate tabs on one line (the zone falls apart into several pieces): fold the ones// the line's points span, each as its own bend.let strips = merge_loops(std::slice::from_ref(&strip), &mut FlatWork::new())?;+ // A zone clipped across the root of a tab folded before on the same line keeps a sliver+ // of no width there: one real piece is the zone (#638).+ let strip = match strips.as_slice() {+ [one] => one.clone(),+ _ => strip,+ };if strips.len() > 1 {let span = (a2.dot(d).min(b2.dot(d)), a2.dot(d).max(b2.dot(d)));let angle = if flip { -angle } else { angle };@@ -2857,7 +2889,7 @@ impl SheetBody {h.push(k);}}- _ => return Err(DocError::Invalid("not supported yet: folding tabs that join again beyond the bend".into())),+ _ => return Err(DocError::Invalid(FOLD_TABS_REJOIN.into())),}}let chosen: Vec<usize> = (0..strips.len()).filter(|&i| strip_u.get(i).is_some_and(|&u| overlap(u, span) > EPS)).collect();diff --git a/crates/engine/src/cmd/sheet_tests.rs b/crates/engine/src/cmd/sheet_tests.rsindex 9dcc80a920..84a2161c7f 100644--- a/crates/engine/src/cmd/sheet_tests.rs+++ b/crates/engine/src/cmd/sheet_tests.rs@@ -2217,6 +2217,45 @@ fn fold_across_two_collinear_tabs() {assert!(bb["max"][2].as_f64().unwrap() > 7.0, "both tabs stand up: {bb}");}+/// After one of two collinear tabs is folded, the other one folds in its own feature too (#638, follow-up to #264).+#[test]+fn fold_second_collinear_tab_after_the_first() {+ let mut s = Session::default();+ two_tab_blank(&mut s);+ let flat = volume(&mut s);+ run(&mut s, "sheet.fold", json!({"points": [[107, 5, 0.8], [107, 12, 0.8]], "fixed": [50, 20, 0.8]}));+ run(&mut s, "sheet.fold", json!({"points": [[107, 28, 0.8], [107, 35, 0.8]], "fixed": [50, 20, 0.8]}));+ assert!(rel(volume(&mut s), flat) < 1e-3, "folds keep the material");+ let bb = &run(&mut s, "inspect.measure", json!({}))["bodies"][0]["bbox"];+ assert!(bb["max"][2].as_f64().unwrap() > 7.0, "the tabs stand up: {bb}");+ // The tabs stand at the bend, x 106.1 .. 107.9 (centerline at x 107).+ assert!(bb["max"][0].as_f64().unwrap() < 110.0, "neither tab still lies flat out to x 115: {bb}");+}++/// An L blank (100 x 50 bottom leg, 40 x 50 upright leg on the right) with a tab x 45..60, y 60..90 on the inside+/// edge x 60. The fold line x 59, extended, runs into the bottom leg.+fn l_blank_with_inside_tab(s: &mut Session) {+ outline_blank(s, json!([[0, 0], [100, 0], [100, 100], [60, 100], [60, 90], [45, 90], [45, 60], [60, 60], [60, 50], [0, 50]]));+}++/// The tab on the inside edge folds wherever on the L sheet `fixed` lies: also when it is on the leg the extended+/// fold line runs into (#639: "folding tabs that join again beyond the bend").+#[test]+fn fold_tab_on_inside_edge_of_l_blank_with_fixed_on_the_far_leg() {+ let mut near = Session::default();+ l_blank_with_inside_tab(&mut near);+ run(&mut near, "sheet.fold", json!({"points": [[59, 60, 0.8], [59, 90, 0.8]], "fixed": [80, 20, 0.8]}));+ let mut far = Session::default();+ l_blank_with_inside_tab(&mut far);+ let flat = volume(&mut far);+ run(&mut far, "sheet.fold", json!({"points": [[59, 60, 0.8], [59, 90, 0.8]], "fixed": [40, 30, 0.8]}));+ assert!(rel(volume(&mut far), flat) < 1e-3, "a fold keeps the material");+ let a = &run(&mut near, "inspect.measure", json!({}))["bodies"][0]["bbox"];+ let b = &run(&mut far, "inspect.measure", json!({}))["bodies"][0]["bbox"];+ assert!(b["max"][2].as_f64().unwrap() > 7.0, "the tab stands up: {b}");+ assert_eq!(a, b, "both fixed points are on the same L sheet, so the fold must give the same part");+}+/// Edge flanges on both tab ends in one feature (two separate features already work) (#264).#[test]fn edge_flanges_on_two_collinear_tab_ends_in_one_feature() {diff --git a/crates/engine/src/cmd/sheet_tests.rs.orig b/crates/engine/src/cmd/sheet_tests.rs.origdeleted file mode 100644index 9f1178e753..0000000000--- a/crates/engine/src/cmd/sheet_tests.rs.orig+++ /dev/null@@ -1,3550 +0,0 @@-use std::f64::consts::{FRAC_PI_2, PI};--use serde_json::{Value, json};--use crate::Session;--fn run(s: &mut Session, id: &str, p: Value) -> Value {- match s.execute(id, &p) {- Ok(v) => v,- Err(e) => panic!("{id} {p}: {e}"),- }-}--fn volume(s: &mut Session) -> f64 {- run(s, "inspect.measure", json!({}))["total"]["volume_mm3"].as_f64().unwrap_or(f64::NAN)-}--fn rel(a: f64, b: f64) -> f64 {- (a - b).abs() / b.abs().max(1e-12)-}--fn flat(s: &mut Session) -> Value {- run(s, "sheet.flat_pattern", json!({}))-}--/// A w x h base flange on XY.-fn base(s: &mut Session, w: f64, h: f64) {- run(s, "sketch.create", json!({"plane": "XY", "name": "Base"}));- run(s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [w, h]}));- run(s, "sketch.finish", json!({}));- run(s, "sheet.flange", json!({"sketch": "Base"}));-}--fn rectangle_tool(s: &mut Session, name: &str, p0: [f64; 2], p1: [f64; 2]) {- run(s, "sketch.create", json!({"plane":"XY","name":name}));- run(s, "sketch.rectangle.two_point", json!({"p0":p0,"p1":p1}));- run(s, "sketch.finish", json!({}));-}--#[test]-fn shallow_sheet_pocket_preserves_material_depth_export_undo_and_reopen() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Pocket", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Pocket","distance":1,"operation":"cut"}));- assert!((volume(&mut s) - 14900.0).abs() < 1e-6);- let f = flat(&mut s);- assert_eq!(f["cutouts"], json!([]));- assert_eq!(f["pockets"][0]["side"], "bottom");- assert_eq!(f["pockets"][0]["depth_mm"], 1.0);- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert!(dxf.contains("POCKET_BOTTOM_Z0.000000_TO_1.000000_MM"));- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 8);- run(&mut s, "edit.undo", json!({}));- assert!((volume(&mut s) - 15000.0).abs() < 1e-6);- run(&mut s, "edit.redo", json!({}));- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({}));- assert!((volume(&mut s) - 14900.0).abs() < 1e-6);- let state = s.model.state();- let body = &state.bodies[0].body;- assert!(!body.contains(solidcraft_geom::Vec3::new(25.0, 25.0, 0.5)));- assert!(body.contains(solidcraft_geom::Vec3::new(25.0, 25.0, 1.5)));- }- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((volume(&mut reopened) - 14900.0).abs() < 1e-6);- assert_eq!(flat(&mut reopened)["pockets"], f["pockets"]);-}--#[test]-fn planar_sheet_intersection_retains_exact_outline_and_islands() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Retain", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Retain","through_all":true,"direction":"symmetric","operation":"intersect"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!((volume(&mut s) - 250.0).abs() < 1e-6);- assert_eq!(flat(&mut s)["flat_size_mm"], json!([10.0, 10.0, 2.5]));- }- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 4);- let mut imported = Session::default();- run(&mut imported, "sketch.insert_dxf", json!({"name":"Retained","text":dxf}));- run(&mut imported, "sketch.finish", json!({}));- run(&mut imported, "solid.extrude", json!({"sketch":"Retained","distance":2.5}));- assert!((volume(&mut imported) - 250.0).abs() < 1e-6);- // An annular retained region keeps its central hole, with no first-solid shortcut.- let mut annulus = Session::default();- base(&mut annulus, 100.0, 60.0);- run(&mut annulus, "sketch.create", json!({"plane":"XY","name":"Ring"}));- run(&mut annulus, "sketch.circle.center", json!({"center":[50,30],"radius":10}));- run(&mut annulus, "sketch.circle.center", json!({"center":[50,30],"radius":5}));- run(&mut annulus, "sketch.finish", json!({}));- run(- &mut annulus,- "solid.extrude",- json!({"sketch":"Ring","profiles":[{"point":[57,30]}],"through_all":true,"direction":"symmetric","operation":"intersect"}),- );- run(&mut annulus, "sheet.unfold", json!({}));- let area: f64 = annulus.model.state().sheets[0].flat_regions().unwrap().iter().map(|r| r.area()).sum();- assert!((area - PI * 75.0).abs() < 1e-8, "exact retained area: {area}");- // inspect.measure integrates a tessellation; exact arc area is checked above.- let measured = volume(&mut annulus);- assert!((measured - PI * 75.0 * 2.5).abs() < 0.1, "measured={measured}");- assert_eq!(flat(&mut annulus)["cutouts"].as_array().unwrap().len(), 1);-}--#[test]-fn overlapping_opposite_side_pockets_become_true_through_material() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Bottom", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Bottom","distance":1.5,"operation":"cut"}));- rectangle_tool(&mut s, "Top", [25.0, 20.0], [35.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Top","start_offset":2.5,"direction":"negative","distance":1.5,"operation":"cut"}));- let expected = 15000.0 - 100.0 * 1.5 * 2.0 + 50.0 * 0.5;- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!((volume(&mut s) - expected).abs() < 1e-6);- assert_eq!(flat(&mut s)["cutouts"].as_array().unwrap().len(), 1);- assert_eq!(flat(&mut s)["pockets"].as_array().unwrap().len(), 2);- }-}--#[test]-fn pockets_survive_forming_away_from_bends_and_refuse_bend_overlap_atomically() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Pocket", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Pocket","distance":1,"operation":"cut"}));- run(&mut s, "sheet.flange", json!({"edges":[[50,0,2.5]],"height":20}));- assert!((volume(&mut s) - (18972.62196081845 - 100.0)).abs() < 0.2);- run(&mut s, "sheet.unfold", json!({}));- let unfolded = volume(&mut s);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - (18972.62196081845 - 100.0)).abs() < 0.2);- assert!(unfolded > 14900.0);- let mut cross = Session::default();- base(&mut cross, 100.0, 60.0);- rectangle_tool(&mut cross, "Pocket", [45.0, 20.0], [55.0, 30.0]);- run(&mut cross, "solid.extrude", json!({"sketch":"Pocket","distance":1,"operation":"cut"}));- let before = cross.doc.to_json();- let undo = cross.undo.len();- let error = cross.execute("sheet.fold", &json!({"points":[[50,0,2.5],[50,60,2.5]]})).unwrap_err().to_string();- assert!(error.contains("pocket") && error.contains("bend"), "{error}");- assert_eq!(cross.doc.to_json(), before);- assert_eq!(cross.undo.len(), undo);- assert!((volume(&mut cross) - 14900.0).abs() < 1e-6);-}--#[test]-fn unsupported_sheet_machining_is_atomic_but_true_no_change_is_allowed() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Taper", [20.0, 20.0], [30.0, 30.0]);- let before = s.doc.to_json();- let undo = s.undo.len();- let error = s.execute("solid.extrude", &json!({"sketch":"Taper","distance":1,"operation":"cut","taper":"5 deg"})).unwrap_err().to_string();- assert!(error.contains("sheet") && error.contains("preserv"), "{error}");- assert_eq!(s.doc.to_json(), before);- assert_eq!(s.undo.len(), undo);- rectangle_tool(&mut s, "Outside", [120.0, 20.0], [130.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Outside","distance":1,"operation":"cut","taper":"5 deg"}));- assert!((volume(&mut s) - 15000.0).abs() < 1e-6);- rectangle_tool(&mut s, "All", [-20.0, -20.0], [120.0, 80.0]);- run(&mut s, "solid.extrude", json!({"sketch":"All","through_all":true,"direction":"symmetric","operation":"intersect"}));- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 15000.0).abs() < 1e-6);-}--#[test]-fn empty_sheet_intersection_removes_geometry_and_metadata_together() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Outside", [120.0, 20.0], [130.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Outside","through_all":true,"direction":"symmetric","operation":"intersect"}));- assert!(s.model.state().bodies.is_empty());- assert!(s.model.state().sheets.is_empty());- assert!(s.execute("sheet.unfold", &json!({})).is_err());- run(&mut s, "edit.undo", json!({}));- assert!((volume(&mut s) - 15000.0).abs() < 1e-6);-}--#[test]-fn intersect_preserves_both_material_regions_of_a_logical_ring_sheet() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane":"XY","name":"Ring"}));- for radius in [10.0, 5.0] {- run(&mut s, "sketch.circle.center", json!({"center":[50,30],"radius":radius}));- }- run(&mut s, "sketch.finish", json!({}));- run(- &mut s,- "solid.extrude",- json!({"sketch":"Ring","profiles":[{"point":[57,30]}],"through_all":true,"direction":"symmetric","operation":"cut"}),- );- rectangle_tool(&mut s, "Crop", [35.0, 15.0], [65.0, 45.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Crop","through_all":true,"direction":"symmetric","operation":"intersect"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- let state = s.model.state();- let regions = state.sheets[0].flat_regions().unwrap();- assert_eq!(regions.len(), 2);- let area: f64 = regions.iter().map(|r| r.area()).sum();- assert!((area - (900.0 - PI * 75.0)).abs() < 1e-8, "area={area}");- let body = &state.bodies[0].body;- assert!(body.contains(solidcraft_geom::Vec3::new(50.0, 30.0, 1.0)));- assert!(!body.contains(solidcraft_geom::Vec3::new(57.0, 30.0, 1.0)));- assert!(body.contains(solidcraft_geom::Vec3::new(64.0, 30.0, 1.0)));- assert!(!body.contains(solidcraft_geom::Vec3::new(70.0, 30.0, 1.0)));- assert!((volume(&mut s) - (900.0 - PI * 75.0) * 2.5).abs() < 0.2);- }- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 6);-}--#[test]-fn machining_a_folded_parallel_panel_preserves_its_pocket_on_unfold() {- use solidcraft_doc::{apply_point, apply_vector};- use solidcraft_geom::Vec3;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges":[[50,0,2.5]],"height":20}));- let sh = s.model.state().sheets[0].clone();- let points = sh.panel(&sh.flanges[0]).outer.polyline(1e-3);- let c = points.iter().copied().fold(solidcraft_geom::Vec2::ZERO, |sum, p| sum + p) / (points.len() as f64);- let w = sh.world(Some(0));- let origin = apply_point(&w, Vec3::ZERO);- let x = apply_vector(&w, Vec3::X);- let y = apply_vector(&w, Vec3::Y);- run(- &mut s,- "sketch.create",- json!({"name":"PanelPocket","plane":{"origin":[origin.x,origin.y,origin.z],"x_dir":[x.x,x.y,x.z],"y_dir":[y.x,y.y,y.z]}}),- );- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[c.x-2.0,c.y-2.0],"p1":[c.x+2.0,c.y+2.0]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch":"PanelPocket","distance":1,"operation":"cut"}));- assert!((volume(&mut s) - (18972.62196081845 - 16.0)).abs() < 0.2);- run(&mut s, "sheet.unfold", json!({}));- let state = s.model.state();- let body = &state.bodies[0].body;- assert!(!body.contains(Vec3::new(c.x, c.y, 0.5)));- assert!(body.contains(Vec3::new(c.x, c.y, 1.5)));- assert_eq!(flat(&mut s)["pockets"][0]["depth_mm"], 1.0);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - (18972.62196081845 - 16.0)).abs() < 0.2);-}--#[test]-fn flipped_sheet_pocket_keeps_depth_in_the_local_thickness_direction() {- let mut s = Session::default();- rectangle_tool(&mut s, "Base", [0.0, 0.0], [100.0, 60.0]);- run(&mut s, "sheet.flange", json!({"sketch":"Base","flip":true}));- rectangle_tool(&mut s, "Pocket", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Pocket","distance":1,"direction":"negative","operation":"cut"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!((volume(&mut s) - 14900.0).abs() < 1e-6);- let state = s.model.state();- assert!(!state.bodies[0].body.contains(solidcraft_geom::Vec3::new(25.0, 25.0, -0.5)));- assert!(state.bodies[0].body.contains(solidcraft_geom::Vec3::new(25.0, 25.0, -1.5)));- }-}--#[test]-fn multiple_profile_intersect_keeps_tool_union_for_solids_and_sheet_groups() {- for sheet in [false, true] {- let mut s = Session::default();- if sheet {- base(&mut s, 100.0, 60.0);- } else {- run(&mut s, "solid.box", json!({"length":100,"width":60,"height":2.5,"body_name":"Blank"}));- }- let target = s.model.state().bodies[0].name.clone();- run(&mut s, "solid.box", json!({"corner":[200,0,0],"length":10,"width":10,"height":10,"body_name":"Control"}));- run(&mut s, "sketch.create", json!({"plane":"XY","name":"TwoIslands"}));- for x in [20.0, 60.0] {- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[x,20],"p1":[x+10.0,30]}));- }- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch":"TwoIslands","operation":"intersect","distance":3,"targets":[target]}));- assert!((volume(&mut s) - 1500.0).abs() < 1e-6);- if sheet {- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({"body":target}));- assert!((volume(&mut s) - 1500.0).abs() < 1e-6);- assert_eq!(flat(&mut s)["outline"].as_array().unwrap().len(), 2);- }- }- let state = s.model.state();- for x in [25.0, 65.0] {- assert!(state.bodies.iter().any(|b| b.body.contains(solidcraft_geom::Vec3::new(x, 25.0, 1.0))));- }- assert!(!state.bodies.iter().any(|b| b.body.contains(solidcraft_geom::Vec3::new(50.0, 25.0, 1.0))));- assert!(state.bodies.iter().any(|b| b.name == "Control" && b.body.contains(solidcraft_geom::Vec3::new(205.0, 5.0, 5.0))));- }-}--#[test]-fn deleting_sheet_material_prunes_cosmetic_threads_and_undo_restores_them() {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane":"XY","name":"ThreadPlate"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[0,0],"p1":[100,60]}));- run(&mut s, "sketch.circle.center", json!({"center":[50,30],"radius":5}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch":"ThreadPlate","profiles":[{"point":[10,10]}]}));- run(&mut s, "solid.thread", json!({"face":[55,30,1],"designation":"M10"}));- assert_eq!(s.model.state().threads.len(), 1);- rectangle_tool(&mut s, "Outside", [120.0, 20.0], [130.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Outside","through_all":true,"direction":"symmetric","operation":"intersect"}));- assert!(s.model.state().bodies.is_empty());- assert!(s.model.state().sheets.is_empty());- assert!(s.model.state().threads.is_empty());- assert!(solidcraft_doc::world_state(&s.doc, &s.model.state()).threads.is_empty());- run(&mut s, "edit.undo", json!({}));- assert_eq!(s.model.state().threads.len(), 1);-}--#[test]-fn sheet_pocket_transfer_keeps_local_depth_world_pose_and_history() {- use solidcraft_geom::Vec3;- fn check(s: &Session, name: &str, owner: u64, local_origin: Vec3, local_y: Vec3, transferred: bool) {- let state = s.model.state();- let mb = state.body(name).unwrap();- assert_eq!(mb.component, owner);- assert_eq!(mb.transferred, transferred);- let sh = state.sheets.iter().find(|sh| sh.body == name).unwrap();- assert!(sh.frame.origin.dist(local_origin) < 1e-8, "{:?}", sh.frame);- assert!(sh.frame.x.dist(Vec3::X) < 1e-8);- assert!(sh.frame.y.dist(local_y) < 1e-8);- assert_eq!(sh.pockets.len(), 1);- assert_eq!((sh.pockets[0].z0, sh.pockets[0].z1), (0.0, 1.0));- let cut = sh.frame.to_world(solidcraft_geom::Vec2::new(25.0, 25.0)) + sh.frame.normal() * 0.5;- let floor = sh.frame.to_world(solidcraft_geom::Vec2::new(25.0, 25.0)) + sh.frame.normal() * 1.5;- assert!(!mb.body.contains(cut));- assert!(mb.body.contains(floor));- let world = s.world_state();- let body = &world.body(name).unwrap().body;- let bounds = body.tessellate(1e-3).unwrap().bounds();- assert!(bounds.min.dist(Vec3::ZERO) < 1e-6, "{bounds:?}");- assert!(bounds.max.dist(Vec3::new(100.0, 60.0, 2.5)) < 1e-6, "{bounds:?}");- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.5)));- assert!(body.contains(Vec3::new(25.0, 25.0, 1.5)));- assert!((solidcraft_kernel::measure(body).unwrap().volume - 14900.0).abs() < 1e-6);- }- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Pocket", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Pocket","distance":1,"operation":"cut"}));- let name = s.model.state().sheets[0].body.clone();- check(&s, &name, 0, Vec3::ZERO, Vec3::Y, false);- let destination = run(&mut s, "component.create", json!({"name":"Machined","parent":0}));- let component = destination["component"].as_u64().unwrap();- let occurrence = destination["occurrence"].as_u64().unwrap();- run(&mut s, "occurrence.move", json!({"occurrence":occurrence,"translate":[30,20,10],"axis":[1,0,0],"angle":"90 deg","capture":true}));- run(&mut s, "component.move_bodies", json!({"component":component,"bodies":[name]}));- assert!(!s.doc.body_offsets.contains_key(&name), "recorded transfer must not leave a legacy placement offset");- let origin = Vec3::new(-30.0, -10.0, 20.0);- let y = Vec3::new(0.0, 0.0, -1.0);- check(&s, &name, component, origin, y, true);- run(&mut s, "edit.undo", json!({}));- check(&s, &name, 0, Vec3::ZERO, Vec3::Y, false);- run(&mut s, "edit.redo", json!({}));- check(&s, &name, component, origin, y, true);- run(&mut s, "component.activate", json!({"component":component}));- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({"body":name}));- check(&s, &name, component, origin, y, true);- let f = run(&mut s, "sheet.flat_pattern", json!({"body":name}));- assert_eq!(f["pockets"][0]["side"], "bottom");- assert_eq!(f["pockets"][0]["depth_mm"], 1.0);- }- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- check(&reopened, &name, component, origin, y, true);- run(&mut reopened, "component.activate", json!({"component":component}));- run(&mut reopened, "sheet.unfold", json!({"body":name}));- check(&reopened, &name, component, origin, y, true);-}--#[test]-fn base_and_edge_flange_follow_the_k_factor() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- assert!(rel(volume(&mut s), 15000.0) < 1e-9);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- // Oracle 68: flat = 60 − 5 + (π/2)(2.5 + 0.44·2.5) + 20 − 5.- let want = 60.0 - 5.0 + FRAC_PI_2 * (2.5 + 0.44 * 2.5) + 15.0;- let f = flat(&mut s);- assert!((f["flat_size_mm"][1].as_f64().unwrap_or(0.0) - want).abs() < 1e-6, "{f}");- assert_eq!(f["bends"][0]["direction"], "up");- assert!(rel(volume(&mut s), 18972.622) < 1e-4, "{}", volume(&mut s));- let m = run(&mut s, "inspect.measure", json!({}));- assert_eq!(m["total"]["faces"], 14, "{m}");- // The angle is a parameter: 45° (oracle 70 uses height 15).- let names = s.doc.features.last().map(|f| f.param_names.clone()).unwrap_or_default();- run(&mut s, "parameters.change", json!({"name": names[0], "expression": "15"}));- run(&mut s, "parameters.change", json!({"name": names[1], "expression": "45 deg"}));- assert!(rel(volume(&mut s), 18450.777) < 1e-4, "{}", volume(&mut s));- assert!((flat(&mut s)["flat_size_mm"][1].as_f64().unwrap_or(0.0) - 73.685298).abs() < 1e-5);- // DXF: outline and an up bend line.- let d = run(&mut s, "sheet.export_dxf", json!({}));- let text = d["dxf"].as_str().unwrap_or_default();- assert!(text.contains("BEND_UP") && text.contains("OUTLINE"), "{text}");- assert!(s.execute("sheet.flange", &json!({"edges": [[50, 30, 40]], "height": 20})).is_err(), "not on an edge");-}--#[test]-fn rules_are_parameters() {- let mut s = Session::default();- run(&mut s, "parameters.change", json!({"name": "Thick", "expression": "1.5 mm"}));- run(&mut s, "sheet.manage_rules", json!({"name": "Custom", "thickness": "Thick", "k_factor": 0.33, "bend_radius": "3 mm"}));- base(&mut s, 80.0, 50.0);- run(&mut s, "sheet.flange", json!({"edges": [[40, 50, 1.5], [40, 0, 1.5]], "height": 20}));- // Oracle 71: 50 − 9 + 2·(π/2)(3 + 0.495) + 2·15.5 = 82.980.- let want = 50.0 - 2.0 * 4.5 + 2.0 * FRAC_PI_2 * (3.0 + 0.33 * 1.5) + 2.0 * 15.5;- assert!((flat(&mut s)["flat_size_mm"][1].as_f64().unwrap_or(0.0) - want).abs() < 1e-6);- assert!(rel(volume(&mut s), 10053.717) < 1e-4, "{}", volume(&mut s));- // Thicker: everything follows.- run(&mut s, "parameters.change", json!({"name": "Thick", "expression": "2 mm"}));- let want = 50.0 - 2.0 * 5.0 + 2.0 * FRAC_PI_2 * (3.0 + 0.33 * 2.0) + 2.0 * 15.0;- assert!((flat(&mut s)["flat_size_mm"][1].as_f64().unwrap_or(0.0) - want).abs() < 1e-6);- let l = run(&mut s, "sheet.rules", json!({}));- assert_eq!(l["active"], "Custom", "{l}");- assert!(s.execute("sheet.manage_rules", &json!({"name": "Bad", "k_factor": 3})).is_err());-}--#[test]-fn contour_flange_hem_and_tray() {- // Oracle 72.- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": {"origin": [0, 0, 0], "x_dir": [1, 0, 0], "y_dir": [0, 0, -1]}, "name": "Contour"}));- run(&mut s, "sketch.line", json!({"points": [[0, 0], [40, 0], [40, -30], [70, -30]], "ids": ["l1", "l2", "l3"]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Contour", "curves": ["l1", "l2", "l3"], "distance": 50}));- assert!(rel(volume(&mut s), 12097.622) < 1e-4, "{}", volume(&mut s));- assert!((flat(&mut s)["flat_size_mm"][0].as_f64().unwrap_or(0.0) - 96.309734).abs() < 1e-5);- // Oracle 73: flange, then a flat hem of 8.- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- run(&mut s, "sheet.hem", json!({"edges": [[50, 0, 20]], "length": 8}));- assert!(rel(volume(&mut s), 21334.723) < 1e-4, "{}", volume(&mut s));- let b = flat(&mut s)["bends"].clone();- assert!(b.as_array().is_some_and(|a| a.iter().any(|x| (x["angle_deg"].as_f64().unwrap_or(0.0) - 180.0).abs() < 1e-9)), "{b}");- // A tray: four flanges at once stop at each other's bends.- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 60, 2.5], [100, 30, 2.5], [50, 0, 2.5], [0, 30, 2.5]], "height": 25}));- let f = flat(&mut s);- // Oracle 69: 100 − 10 + 2·5.655 + 2·20 = 141.310 across.- assert!((f["flat_size_mm"][0].as_f64().unwrap_or(0.0) - (90.0 + 2.0 * FRAC_PI_2 * 3.6 + 40.0)).abs() < 1e-6, "{f}");- let v = volume(&mut s);- // Each flange runs on past its bend toward the corner until the inner corners are the- // rule's gap apart (diagonally): 5 − (2.5 + 2.5/√2) = 0.732 at each of 8 ends.- let section = PI / 4.0 * (25.0 - 6.25) + 2.5 * 20.0;- let ext = 5.0 - (2.5 + 2.5 / std::f64::consts::SQRT_2);- let want = 90.0 * 50.0 * 2.5 + section * (2.0 * 90.0 + 2.0 * 50.0) + 8.0 * ext * 2.5 * 20.0;- assert!(rel(v, want) < 1e-4 && rel(v, 29666.234) < 1e-4, "{v} {want}");-}--#[test]-fn unfold_cut_refold_and_convert() {- // Oracle 74: two flanges, unfold, a slot across the bend, refold.- let mut s = Session::default();- base(&mut s, 80.0, 50.0);- run(&mut s, "sheet.flange", json!({"edges": [[40, 50, 2.5], [40, 0, 2.5]], "height": 20}));- let folded = volume(&mut s);- run(&mut s, "sheet.unfold", json!({}));- let m = run(&mut s, "inspect.measure", json!({}));- assert!((m["bodies"][0]["bbox"]["max"][2].as_f64().unwrap_or(0.0) - 2.5).abs() < 1e-6, "{m}");- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Slot"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [35, -12], "p1": [45, 10]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Slot", "through_all": true, "operation": "cut", "direction": "symmetric"}));- run(&mut s, "sheet.refold", json!({}));- let v = volume(&mut s);- assert!(v < folded - 300.0, "{v} {folded}");- assert!(rel(v, 15800.304) < 1e-4, "{v}");- assert_eq!(flat(&mut s)["cutouts"].as_array().map(Vec::len), Some(1));- // Convert a plate.- let mut s = Session::default();- run(&mut s, "solid.box", json!({"length": 100, "width": 60, "height": 2.5, "body_name": "Plate"}));- run(&mut s, "sheet.convert", json!({"body": "Plate", "face": [50, 30, 2.5]}));- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- assert!(rel(volume(&mut s), 18972.622) < 1e-4, "{}", volume(&mut s));- let mut t = Session::default();- run(&mut t, "solid.cylinder", json!({"radius": 10, "height": 30, "body_name": "Rod"}));- assert!(t.execute("sheet.convert", &json!({"body": "Rod", "face": [0, 0, 30]})).is_err());-}--/// A sketch line across a 100 x 60 plate's top face at x = 40.-fn fold_line(s: &mut Session) {- run(s, "sketch.create", json!({"plane": "XY", "offset": 2.5, "name": "FoldLine"}));- run(s, "sketch.line", json!({"points": [[40, 0], [40, 60]], "ids": ["fl"]}));- run(s, "sketch.finish", json!({}));-}--fn bbox(s: &mut Session) -> Value {- run(s, "inspect.measure", json!({}))["bodies"][0]["bbox"].clone()-}--#[test]-fn fold_takes_the_bend_out_of_the_flat_sheet() {- let (t, r, k) = (2.5, 2.5, 0.44);- let ba = FRAC_PI_2 * (r + k * t);- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- fold_line(&mut s);- run(&mut s, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl"}));- // The flat pattern keeps its size; the bend's centre line is the sketch line.- let f = flat(&mut s);- assert!((f["flat_size_mm"][0].as_f64().unwrap_or(0.0) - 100.0).abs() < 1e-6, "{f}");- assert!((f["flat_size_mm"][1].as_f64().unwrap_or(0.0) - 60.0).abs() < 1e-6, "{f}");- assert!((f["bends"][0]["allowance"].as_f64().unwrap_or(0.0) - ba).abs() < 1e-9, "{f}");- // Folded: the zone's flat volume BA·T·w becomes the bend's θ·T·(R + T/2)·w.- let want = 15000.0 - ba * t * 60.0 + FRAC_PI_2 * t * (r + t / 2.0) * 60.0;- assert!(rel(volume(&mut s), want) < 1e-4, "{} {want}", volume(&mut s));- // The smaller side (x < 40) stands up: outer face at the zone start less R + T, leg 40 − BA/2- // tall above the bend.- let b = bbox(&mut s);- assert!((b["min"][0].as_f64().unwrap_or(0.0) - (40.0 + ba / 2.0 - r - t)).abs() < 1e-6, "{b}");- assert!((b["max"][2].as_f64().unwrap_or(0.0) - (t + r + 40.0 - ba / 2.0)).abs() < 1e-6, "{b}");- assert!((b["max"][0].as_f64().unwrap_or(0.0) - 100.0).abs() < 1e-6, "{b}");-}--#[test]-fn fold_positions_fixed_side_and_flip() {- let (t, r, k) = (2.5, 2.5, 0.44);- let ba = FRAC_PI_2 * (r + k * t);- let case = |p: Value| {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- fold_line(&mut s);- let mut q = json!({"sketch": "FoldLine", "curve": "fl"});- for (k, v) in p.as_object().into_iter().flatten() {- q[k] = v.clone();- }- run(&mut s, "sheet.fold", q);- bbox(&mut s)- };- let x0 = |b: &Value| b["min"][0].as_f64().unwrap_or(f64::NAN);- // Start: the bend starts at the line (on the fixed side), so the folded outer face is R + T- // short of it. End: the bend ends there. Mould: the outer face lands on the line.- assert!((x0(&case(json!({"position": "start"}))) - (40.0 - r - t)).abs() < 1e-6);- assert!((x0(&case(json!({"position": "end"}))) - (40.0 + ba - r - t)).abs() < 1e-6);- assert!((x0(&case(json!({"position": "mould"}))) - 40.0).abs() < 1e-6);- // Keep the small side: the large one (x > 40) stands up instead.- let b = case(json!({"fixed": [10, 30, 2.5]}));- assert!((b["max"][0].as_f64().unwrap_or(0.0) - (40.0 - ba / 2.0 + r + t)).abs() < 1e-6, "{b}");- assert!((b["max"][2].as_f64().unwrap_or(0.0) - (t + r + 60.0 - ba / 2.0)).abs() < 1e-6, "{b}");- // Flipped: folds down, below the sheet.- let b = case(json!({"flip": true}));- assert!((b["min"][2].as_f64().unwrap_or(0.0) + (r + 40.0 - ba / 2.0)).abs() < 1e-6, "{b}");- // A 45° fold: the leg leans.- let b = case(json!({"angle": "45 deg"}));- assert!(b["max"][2].as_f64().unwrap_or(0.0) < t + r + 40.0 - ba / 2.0);-}--#[test]-fn fold_carries_flanges_on_the_moving_side() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- // A flange on the left edge, then a fold between it and the rest.- run(&mut s, "sheet.flange", json!({"edges": [[0, 30, 2.5]], "height": 20}));- let v0 = volume(&mut s);- fold_line(&mut s);- run(&mut s, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl", "fixed": [90, 30, 2.5]}));- // The flange rode along: it is above the plate now, nothing left at z < 0.- let b = bbox(&mut s);- assert!(b["min"][2].as_f64().unwrap_or(-1.0) > -1e-6, "{b}");- let ba = FRAC_PI_2 * (2.5 + 0.44 * 2.5);- let want = v0 - ba * 2.5 * 60.0 + FRAC_PI_2 * 2.5 * (2.5 + 1.25) * 60.0;- assert!(rel(volume(&mut s), want) < 1e-4, "{} {want}", volume(&mut s));- assert!(flat(&mut s)["bends"].as_array().map(Vec::len) == Some(2));- // Errors: off the sheet, through the flange's bend.- let mut e = Session::default();- base(&mut e, 100.0, 60.0);- assert!(e.execute("sheet.fold", &json!({"points": [[40, 0, 30], [40, 60, 30]]})).is_err());- assert!(e.execute("sheet.fold", &json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "position": "sideways"})).is_err());- assert!(e.execute("sheet.fold", &json!({"points": [[0.5, 0, 2.5], [0.5, 60, 2.5]]})).is_err(), "no material past the bend");-}--#[test]-fn fold_on_a_flange_panel() {- let (t, r, k) = (2.5, 2.5, 0.44);- let ba = FRAC_PI_2 * (r + k * t);- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 30}));- let flat0 = flat(&mut s)["flat_size_mm"].clone();- let v0 = volume(&mut s);- // The flange stands up at the plate's y = 0 edge: its outer face is the body's min y.- let y = bbox(&mut s)["min"][1].as_f64().unwrap_or(f64::NAN);- run(&mut s, "sheet.fold", json!({"points": [[10, y, 18], [90, y, 18]]}));- let f = flat(&mut s);- for i in 0..2 {- assert!(- (f["flat_size_mm"][i].as_f64().unwrap_or(0.0) - flat0[i].as_f64().unwrap_or(1.0)).abs() < 1e-6,- "the flat pattern keeps its size: {f}"- );- }- assert_eq!(f["bends"].as_array().map(Vec::len), Some(2));- let len = f["bends"][1]["length"].as_f64().unwrap_or(0.0);- assert!(len > 90.0, "{f}");- let want = v0 - ba * t * len + FRAC_PI_2 * t * (r + t / 2.0) * len;- assert!(rel(volume(&mut s), want) < 1e-4, "{} {want}", volume(&mut s));- // The top part now leans over the plate (folded up, toward its top face).- let b = bbox(&mut s);- assert!(b["max"][2].as_f64().unwrap_or(99.0) < 25.0, "{b}");- // Folding across the flange's own bend is refused.- assert!(s.execute("sheet.fold", &json!({"points": [[50, y, 2], [50, y, 25]]})).is_err());-}--#[test]-fn fold_through_cut_outs() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- // A slot across the fold line (edges along and across the bend).- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Slot"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [30, 20], "p1": [50, 40]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Slot", "through_all": true, "operation": "cut", "direction": "symmetric"}));- let mut plain = Session::default();- base(&mut plain, 100.0, 60.0);- fold_line(&mut plain);- run(&mut plain, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl"}));- fold_line(&mut s);- run(&mut s, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl"}));- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1), "{f}");- let (v, vp) = (volume(&mut s), volume(&mut plain));- // The slot takes 20 x 20 of the flat sheet; across the bend it removes the bend's share.- assert!(v < vp - 900.0 && v > vp - 1100.0, "{v} {vp}");- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - (15000.0 - 1000.0)).abs() < 1e-3, "{}", volume(&mut s));- // A round hole across the bend folds too: its edge runs over the bend as a curve on the- // bend's cylinder, and unfolds to the same round hole.- let mut c = Session::default();- base(&mut c, 100.0, 60.0);- run(&mut c, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- run(&mut c, "sketch.circle.center", json!({"center": [40, 30], "radius": 5}));- run(&mut c, "sketch.finish", json!({}));- run(&mut c, "solid.extrude", json!({"sketch": "Hole", "through_all": true, "operation": "cut", "direction": "symmetric"}));- fold_line(&mut c);- run(&mut c, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl"}));- let f = flat(&mut c);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1), "{f}");- let folded = volume(&mut c);- assert!(folded < 15000.0 - 150.0, "{folded}");- run(&mut c, "sheet.unfold", json!({}));- let want = 15000.0 - std::f64::consts::PI * 25.0 * 2.5;- assert!((volume(&mut c) - want).abs() < 0.05, "{} vs {want}", volume(&mut c));-}--#[test]-fn flange_edges_are_named_and_follow_the_base_sketch() {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Base"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- let d = run(&mut s, "sketch.dimension", json!({"entities": ["l1"], "value": 100}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Base"}));- run(&mut s, "sheet.flange", json!({"edges": [[100, 30, 2.5]], "height": 20, "name": "Side"}));- let side = s.doc.find_feature("Side").cloned().unwrap();- assert_eq!(side.edge_names, vec!["base:l2:top".to_string()]);- let v0 = volume(&mut s);- // Narrower base: the flange stays on the right edge (now at x = 40).- let name = d["param"].as_str().or_else(|| d["name"].as_str()).map(str::to_string).unwrap_or_else(|| "d1".into());- run(&mut s, "parameters.change", json!({"name": name, "expression": "40"}));- let b = run(&mut s, "inspect.measure", json!({}))["bodies"][0]["bbox"].clone();- let w = b["max"][0].as_f64().unwrap_or(0.0) - b["min"][0].as_f64().unwrap_or(0.0);- assert!((w - 40.0).abs() < 1e-3 && b["max"][2].as_f64().unwrap_or(0.0) > 19.0, "{b}");- assert!(volume(&mut s) < v0);- let id = side.id;- assert_eq!(s.model.result(id).and_then(|r| r.warning.clone()), None);- // A hem on the flange's far edge is named after the flange.- let top = b["max"][2].as_f64().unwrap_or(0.0);- let x = b["max"][0].as_f64().unwrap_or(0.0);- run(&mut s, "sheet.hem", json!({"edges": [[x, 30, top]], "length": 6, "name": "H"}));- let h = s.doc.find_feature("H").cloned().unwrap();- assert!(h.edge_names[0].starts_with(&format!("F{id}.0:far")), "{:?}", h.edge_names);-}--/// With no fixed side, the larger side stays whichever side of the line it is on (QA s22).-#[test]-fn fold_keeps_the_larger_side_either_way() {- for (w, line, moving_right) in [(60.0, 40.0, true), (100.0, 40.0, false)] {- let mut s = Session::default();- base(&mut s, w, 40.0);- run(&mut s, "sheet.fold", json!({"points": [[line, 0, 2.5], [line, 40, 2.5]]}));- let b = bbox(&mut s);- let (x0, x1) = (b["min"][0].as_f64().unwrap_or(0.0), b["max"][0].as_f64().unwrap_or(0.0));- if moving_right {- assert!(x0.abs() < 1e-6 && x1 < line + 5.0, "the left (larger) part stays: {b}");- } else {- assert!((x1 - w).abs() < 1e-6 && x0 > line - 5.0, "the right (larger) part stays: {b}");- }- }-}--/// A 100 x 60 plate with a 90° flange up from its y = 0 edge (steel: 2.5 thick, R = T, K 0.44).-/// The flange's inner face is the plane y = 2.5 and its outer face y = 0; it stands from z = 5.-fn plate_with_flange(s: &mut Session) {- base(s, 100.0, 60.0);- run(s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));-}--/// A circle sketch on `plane`, finished.-fn circle_sketch(s: &mut Session, name: &str, plane: Value, center: [f64; 2], diameter: f64) -> Value {- let made = run(s, "sketch.create", json!({"plane": plane, "name": name}));- run(s, "sketch.circle.center", json!({"center": center, "diameter": diameter}));- run(s, "sketch.finish", json!({}));- made-}--fn cut_through(s: &mut Session, sketch: &str) {- run(s, "solid.extrude", json!({"sketch": sketch, "through_all": true, "direction": "negative", "operation": "cut"}));-}--fn contains(s: &Session, p: [f64; 3]) -> bool {- s.model.state().bodies.first().is_some_and(|b| b.body.contains(solidcraft_geom::Vec3::new(p[0], p[1], p[2])))-}--#[test]-fn a_sketch_on_a_flange_face_attaches_to_its_panel() {- // Sketch coordinates on a sheet face are the flat pattern's: the flange panel starts at- // y = 5 − BA and runs on toward −y, so a hole 7 mm up the face is at y = 5 − BA − 7.- let ba = FRAC_PI_2 * (2.5 + 0.44 * 2.5);- let hole = PI * 1.8 * 1.8 * 2.5;- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- let made = circle_sketch(&mut s, "Holes", json!({"face": [50, 2.5, 12]}), [30.0, 5.0 - ba - 7.0], 3.6);- assert_eq!(made["attachment"], "sheet_face");- // The sketch keeps the face's name: the body, the panel (its flange) and the side of the sheet.- let sketch = s.doc.find_feature("Holes").cloned().unwrap();- let solidcraft_doc::FeatureKind::Sketch { plane, .. } = &sketch.kind else { panic!("{:?}", sketch.kind) };- let name = solidcraft_doc::sheet::plane_sheet_face(plane).unwrap_or_default();- assert!(name.starts_with("sheet:Body1:F") && name.ends_with(":top"), "{name}");- // A cut through the flange from that sketch is a round hole 7 mm up the face, at x = 30.- run(&mut s, "solid.extrude", json!({"sketch": "Holes", "distance": 2.5, "direction": "negative", "operation": "cut"}));- assert!((v0 - volume(&mut s) - hole).abs() < 0.1, "{}", v0 - volume(&mut s));- assert!(!contains(&s, [30.0, 1.25, 12.0]) && contains(&s, [30.0, 1.25, 14.5]) && contains(&s, [33.0, 1.25, 12.0]));- let f = flat(&mut s);- let cut = f["cutouts"][0].as_array().cloned().unwrap_or_default();- assert!(!cut.is_empty(), "{f}");- for p in &cut {- let (x, y) = (p[0].as_f64().unwrap_or(f64::NAN), p[1].as_f64().unwrap_or(f64::NAN));- assert!(((x - 30.0).hypot(y - (5.0 - ba - 7.0)) - 1.8).abs() < 1e-3, "({x}, {y})");- }- // `fixed: true` still freezes the picked plane instead of attaching to the panel.- let frozen = circle_sketch(&mut s, "Frozen", json!({"face": [50, 2.5, 12], "fixed": true}), [0.0, 0.0], 1.0);- assert_eq!(frozen["attachment"], "fixed");-}--/// The thickness of a sheet comes from a parameter: the flange's face moves with it, and a-/// sketch frozen on the old plane cuts a blind pocket in the thicker sheet. The attached-/// sketch cuts the same hole as one drawn on the thicker sheet in the first place.-#[test]-fn a_sketch_on_a_sheet_face_follows_the_sheet_when_its_thickness_changes() {- let build = |t: f64, then: Option<f64>| {- let mut s = Session::default();- run(&mut s, "parameters.add", json!({"name": "T", "expression": format!("{t} mm")}));- run(&mut s, "sheet.manage_rules", json!({"name": "AL", "thickness": "T", "k_factor": "0.5", "bend_radius": "1 mm", "active": true}));- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, t]], "height": 20}));- // The hole is drawn 10 mm up the 2 mm flange, in the flat pattern: its bend ends at- // y = T + R = 3 and the bend allowance is (R + T/2)·π/2 = π. The coordinates stay as they are.- let flat_y = 3.0 - PI - 10.0;- circle_sketch(&mut s, "Holes", json!({"face": [50, t, 12]}), [30.0, flat_y], 6.0);- run(&mut s, "sketch.create", json!({"plane": {"face": [10, 30, t]}, "offset": "5 mm", "name": "Above"}));- run(&mut s, "sketch.finish", json!({}));- let v0 = volume(&mut s);- cut_through(&mut s, "Holes");- if let Some(t2) = then {- let r = run(&mut s, "parameters.change", json!({"name": "T", "expression": format!("{t2} mm")}));- assert_eq!(r["errors"], json!([]), "{r}");- }- (s, v0)- };- let (mut grown, _) = build(2.0, Some(3.0));- let (mut direct, v_direct) = build(3.0, None);- let (vg, vd) = (volume(&mut grown), volume(&mut direct));- // The hole is the cylinder Ø6 × 3 through the thicker sheet, as if drawn there at first.- assert!((v_direct - vd - PI * 9.0 * 3.0).abs() < 0.1, "{}", v_direct - vd);- assert!(rel(vg, vd) < 1e-9, "{vg} {vd}");- let (fg, fd) = (flat(&mut grown), flat(&mut direct));- assert_eq!(fg["pockets"], json!([]), "a blind pocket instead of the hole: {fg}");- assert_eq!(fg["cutouts"], fd["cutouts"]);- // The thicker flange's panel starts at flat y = 4 − 3.927 and z = T + R = 4, so the hole is- // 10.215 mm up it: through the whole 3 mm.- assert!(!contains(&grown, [30.0, 1.5, 14.2]) && !contains(&grown, [30.0, 0.2, 14.2]) && contains(&grown, [30.0, 1.5, 19.0]));- // The sketch offset from the base's top face moved up with it: 3 + 5.- let plane = run(&mut grown, "sketch.inspect", json!({"sketch": "Above"}))["plane"]["origin"][2].as_f64().unwrap_or(f64::NAN);- assert!((plane - 8.0).abs() < 1e-9, "{plane}");-}--#[test]-fn sketches_on_the_top_and_bottom_faces_of_a_sheet_survive_unfold_refold_and_reopen() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- // The top face's coordinates are the base sketch's; the bottom face's mirror y, as seen from below.- circle_sketch(&mut s, "Top", json!({"face": [30, 20, 2.5]}), [30.0, 20.0], 4.0);- circle_sketch(&mut s, "Bottom", json!({"face": [60, 20, 0]}), [60.0, -20.0], 4.0);- cut_through(&mut s, "Top");- cut_through(&mut s, "Bottom");- let want = 15000.0 - 2.0 * PI * 4.0 * 2.5;- assert!((volume(&mut s) - want).abs() < 0.1, "{}", volume(&mut s));- let holes = |f: &Value| {- let mut centres: Vec<(f64, f64)> = f["cutouts"]- .as_array()- .cloned()- .unwrap_or_default()- .iter()- .map(|c| {- let pts: Vec<(f64, f64)> = c- .as_array()- .cloned()- .unwrap_or_default()- .iter()- .map(|p| (p[0].as_f64().unwrap_or(f64::NAN), p[1].as_f64().unwrap_or(f64::NAN)))- .collect();- let n = pts.len().max(1) as f64;- (pts.iter().map(|p| p.0).sum::<f64>() / n, pts.iter().map(|p| p.1).sum::<f64>() / n)- })- .collect();- centres.sort_by(|a, b| a.0.total_cmp(&b.0));- centres- };- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- let centres = holes(&flat(&mut s));- assert_eq!(centres.len(), 2, "{centres:?}");- assert!((centres[0].0 - 30.0).abs() < 0.01 && (centres[0].1 - 20.0).abs() < 0.01, "{centres:?}");- assert!((centres[1].0 - 60.0).abs() < 0.01 && (centres[1].1 - 20.0).abs() < 0.01, "{centres:?}");- assert!((volume(&mut s) - want).abs() < 0.1);- }- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((volume(&mut reopened) - want).abs() < 0.1);- assert_eq!(holes(&flat(&mut reopened)), holes(&flat(&mut s)));-}--#[test]-fn a_sketch_made_on_the_unfolded_sheet_lands_on_the_flange_after_refolding() {- let ba = FRAC_PI_2 * (2.5 + 0.44 * 2.5);- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- run(&mut s, "sheet.unfold", json!({}));- // Unfolded, the flange lies in the sheet's plane: the one flat face covers it too.- let y = 5.0 - ba - 7.0;- circle_sketch(&mut s, "Holes", json!({"face": [30, y, 2.5]}), [30.0, y], 3.6);- cut_through(&mut s, "Holes");- run(&mut s, "sheet.refold", json!({}));- assert!((v0 - volume(&mut s) - PI * 1.8 * 1.8 * 2.5).abs() < 0.1, "{}", v0 - volume(&mut s));- assert!(!contains(&s, [30.0, 1.25, 12.0]) && contains(&s, [30.0, 1.25, 14.5]));-}--#[test]-fn a_sketch_on_a_sheet_face_reports_a_lost_attachment_instead_of_moving_to_another_face() {- let mut s = Session::default();- plate_with_flange(&mut s);- circle_sketch(&mut s, "Holes", json!({"face": [50, 2.5, 12]}), [30.0, -8.0], 3.6);- let id = s.doc.find_feature("Holes").map(|f| f.id).unwrap_or(0);- let status = |s: &Session| s.placed_document().sketch_face_attachment(id, &s.model);- assert!(matches!(status(&s), solidcraft_doc::FaceAttachmentStatus::Sheet { plane: Some(_) }));- // With the flange suppressed there is no such face; the base's top face is not a substitute.- run(&mut s, "timeline.suppress", json!({"feature": "EdgeFlange1", "suppressed": true}));- let error = run(&mut s, "timeline.inspect", json!({"feature": "Holes"}))["error"].as_str().unwrap_or_default().to_string();- assert!(error.contains("lost face attachment") && error.contains("reattach"), "{error}");- let solidcraft_doc::FaceAttachmentStatus::Lost { message, repair_plane } = status(&s) else { panic!("{:?}", status(&s)) };- assert!(message.contains("sheet face") && repair_plane.is_some(), "{message}");- // Redefine Sketch Plane repairs it on another face, here the base's top (its sketch keeps its geometry).- let repaired = run(&mut s, "sketch.redefine", json!({"sketch": "Holes", "plane": {"face": [10, 30, 2.5]}}));- assert_eq!(repaired["attachment"], "sheet_face");- assert!(run(&mut s, "timeline.inspect", json!({"feature": "Holes"}))["error"].is_null());- assert!(matches!(status(&s), solidcraft_doc::FaceAttachmentStatus::Sheet { .. }));- // The flange is back, and a sketch attached to it again is healthy.- run(&mut s, "timeline.suppress", json!({"feature": "EdgeFlange1", "suppressed": false}));- let again = run(&mut s, "sketch.redefine", json!({"sketch": "Holes", "plane": {"face": [50, 2.5, 12]}}));- assert_eq!(again["attachment"], "sheet_face");- assert!(run(&mut s, "timeline.inspect", json!({"feature": "Holes"}))["error"].is_null());- assert!(matches!(status(&s), solidcraft_doc::FaceAttachmentStatus::Sheet { .. }));-}--#[test]-fn renaming_a_sheet_body_keeps_its_sketches_on_their_faces() {- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- circle_sketch(&mut s, "Holes", json!({"face": [50, 2.5, 12]}), [30.0, -8.0], 3.6);- run(&mut s, "sketch.create", json!({"plane": {"face": [10, 30, 2.5]}, "offset": "5 mm", "name": "Above"}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "body.rename", json!({"body": "Body1", "name": "Bracket"}));- for (sketch, face) in [("Holes", "sheet:Bracket:F"), ("Above", "sheet:Bracket:base:top")] {- let feature = s.doc.find_feature(sketch).cloned().unwrap();- let solidcraft_doc::FeatureKind::Sketch { plane, .. } = &feature.kind else { panic!("{:?}", feature.kind) };- assert!(solidcraft_doc::sheet::plane_sheet_face(plane).is_some_and(|name| name.starts_with(face)), "{sketch}: {:?}", feature.kind);- assert!(run(&mut s, "timeline.inspect", json!({"feature": sketch}))["error"].is_null(), "{sketch}");- }- cut_through(&mut s, "Holes");- assert!((v0 - volume(&mut s) - PI * 1.8 * 1.8 * 2.5).abs() < 0.1, "{}", v0 - volume(&mut s));-}--/// A tray shrunk by a parameter change unfolds like the same tray built at that size. The-/// sketch solved again leaves its corners ~1e-13 mm off, and the flat pattern's planar-/// arrangement used to drop a bend zone through a gap that small: "planar region arrangement-/// failed", for W alone or both sizes, at 72° or 90°, while growing the tray worked.-#[test]-fn tray_shrunk_by_a_parameter_unfolds_like_one_built_at_that_size() {- for angle in [72.0, 90.0] {- let tray = |s: &mut Session, w: f64, h: f64| {- run(s, "parameters.add", json!({"name": "W", "expression": format!("{w} mm")}));- run(s, "parameters.add", json!({"name": "H", "expression": format!("{h} mm")}));- run(s, "sheet.manage_rules", json!({"name": "AL2", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "1 mm", "active": true}));- run(s, "sketch.create", json!({"plane": "XY", "name": "Tray"}));- run(s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [w, h]}));- run(s, "sketch.constraint.fix", json!({"entities": ["p1"]}));- run(s, "sketch.dimension", json!({"entities": ["l1"], "value": "W"}));- run(s, "sketch.dimension", json!({"entities": ["l2"], "value": "H"}));- run(s, "sketch.finish", json!({}));- run(s, "sheet.flange", json!({"type": "base", "sketch": "Tray"}));- let edges = json!([[w / 2.0, 0, 2], [w, h / 2.0, 2], [w / 2.0, h, 2], [0, h / 2.0, 2]]);- run(s, "sheet.flange", json!({"type": "edge", "edges": edges, "height": 38.6, "angle": angle}));- run(s, "sheet.unfold", json!({}));- };- let mut direct = Session::default();- tray(&mut direct, 400.0, 300.0);- let want = flat(&mut direct)["flat_size_mm"].clone();- let mut shrunk = Session::default();- tray(&mut shrunk, 2000.0, 2500.0);- for (name, expr) in [("W", "400 mm"), ("H", "300 mm")] {- let r = run(&mut shrunk, "parameters.change", json!({"name": name, "expression": expr}));- assert_eq!(r["errors"], json!([]), "{angle}° {name} = {expr}: {r}");- }- let got = flat(&mut shrunk)["flat_size_mm"].clone();- for k in 0..3 {- assert!((got[k].as_f64().unwrap() - want[k].as_f64().unwrap()).abs() < 1e-9, "{angle}°: {got} {want}");- }- assert!(rel(volume(&mut shrunk), volume(&mut direct)) < 1e-9, "{angle}°");- }-}--#[test]-fn the_bend_table_and_the_dxf_follow_what_flat_cuts_leave_of_a_bend() {- // A 200 x 100 plate with a 40 mm flange along y = 0: the bend's centre line runs at y = -pi/2- // (R 1, T 2, K 0.5: a bend allowance of pi) from x = 0 to 200.- let mut s = Session::default();- run(&mut s, "sheet.manage_rules", json!({"name": "R", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "2 mm", "active": true}));- base(&mut s, 200.0, 100.0);- run(&mut s, "sheet.flange", json!({"edges": [[100, 0, 2]], "height": 40, "angle": 90, "radius": 1, "position": "outside"}));- // (bend number, length, start x, end x) of every row; all on the centre line.- let rows = |s: &mut Session| -> Vec<(u64, f64, f64, f64)> {- let f = flat(s);- let num = |v: &Value| v.as_f64().unwrap_or(f64::NAN);- f["bends"]- .as_array()- .cloned()- .unwrap_or_default()- .iter()- .map(|b| {- assert!((num(&b["start"][1]) + FRAC_PI_2).abs() < 1e-9 && (num(&b["end"][1]) + FRAC_PI_2).abs() < 1e-9, "{b}");- (b["bend"].as_u64().unwrap_or(0), num(&b["length"]), num(&b["start"][0]), num(&b["end"][0]))- })- .collect()- };- let close = |got: &[(u64, f64, f64, f64)], want: &[(u64, f64, f64, f64)]| {- got.len() == want.len()- && got.iter().zip(want).all(|(g, w)| g.0 == w.0 && (g.1 - w.1).abs() < 1e-9 && (g.2 - w.2).abs() < 1e-9 && (g.3 - w.3).abs() < 1e-9)- };- // The DXF's bend lines: both ends' x of every LINE along the centre line, left to right; the- // BEND_UP layer holds nothing else.- let bend_lines = |s: &mut Session| -> Vec<(f64, f64)> {- let text = run(s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- let on_layer = text.lines().collect::<Vec<_>>().windows(2).filter(|w| w[0].trim() == "8" && w[1].trim() == "BEND_UP").count();- let mut found: Vec<(f64, f64)> = solidcraft_io::read_dxf(&text)- .unwrap()- .iter()- .filter_map(|g| match g {- solidcraft_io::Geom2::Line(a, b) if (a.y + FRAC_PI_2).abs() < 1e-6 && (b.y + FRAC_PI_2).abs() < 1e-6 => {- Some((a.x.min(b.x), a.x.max(b.x)))- }- _ => None,- })- .collect();- found.sort_by(|a, b| a.0.total_cmp(&b.0));- assert_eq!(found.len(), on_layer, "{text}");- found- };- assert!(close(&rows(&mut s), &[(1, 200.0, 0.0, 200.0)]), "{:?}", rows(&mut s));- assert_eq!(bend_lines(&mut s).len(), 1);- // A flat cut takes the flange's left half, its bend and a strip of the base.- run(&mut s, "sheet.unfold", json!({}));- rectangle_tool(&mut s, "Half", [-10.0, -60.0], [100.0, 10.0]);- run(&mut s, "solid.extrude", json!({"sketch": "Half", "through_all": true, "direction": "symmetric", "operation": "cut"}));- run(&mut s, "sheet.refold", json!({}));- assert!(close(&rows(&mut s), &[(1, 100.0, 100.0, 200.0)]), "{:?}", rows(&mut s));- let lines = bend_lines(&mut s);- assert!(lines.len() == 1 && (lines[0].0 - 100.0).abs() < 1e-6 && (lines[0].1 - 200.0).abs() < 1e-6, "{lines:?}");- let csv = run(&mut s, "sheet.export_bend_table", json!({}));- let text = csv["text"].as_str().unwrap_or_default();- assert_eq!((text.lines().count(), csv["bends"].as_u64()), (2, Some(1)), "{text}");- assert!(text.lines().nth(1).is_some_and(|l| l.contains(",1,90.000000000,up,1.000000000,3.141592654,100.000000000,100.000000000,")), "{text}");- // A slot across what is left splits the bend: a row and a line for each piece, both bend 1.- run(&mut s, "sheet.unfold", json!({}));- rectangle_tool(&mut s, "Slot", [140.0, -20.0], [160.0, 10.0]);- run(&mut s, "solid.extrude", json!({"sketch": "Slot", "through_all": true, "direction": "symmetric", "operation": "cut"}));- run(&mut s, "sheet.refold", json!({}));- assert!(close(&rows(&mut s), &[(1, 40.0, 100.0, 140.0), (1, 40.0, 160.0, 200.0)]), "{:?}", rows(&mut s));- let lines = bend_lines(&mut s);- assert!(lines.len() == 2 && (lines[0].1 - 140.0).abs() < 1e-6 && (lines[1].0 - 160.0).abs() < 1e-6, "{lines:?}");- let csv = run(&mut s, "sheet.export_bend_table", json!({}));- assert_eq!((csv["text"].as_str().unwrap_or_default().lines().count(), csv["bends"].as_u64()), (3, Some(2)));- // Unfolded, the flat pattern lists the same pieces.- run(&mut s, "sheet.unfold", json!({}));- assert!(close(&rows(&mut s), &[(1, 40.0, 100.0, 140.0), (1, 40.0, 160.0, 200.0)]), "{:?}", rows(&mut s));-}--/// The flat pattern's area: its outline loops less its cut-outs.-fn flat_area(f: &Value) -> f64 {- let loops = |k: &str| -> f64 {- let all = f[k].as_array().cloned().unwrap_or_default();- all.iter()- .map(|l| {- let pts: Vec<(f64, f64)> = l- .as_array()- .cloned()- .unwrap_or_default()- .iter()- .map(|q| (q[0].as_f64().unwrap_or(f64::NAN), q[1].as_f64().unwrap_or(f64::NAN)))- .collect();- polygon_area(&pts)- })- .sum()- };- loops("outline") - loops("cutouts")-}--#[test]-fn an_edge_flange_made_after_a_cut_runs_along_the_edge_the_cut_left() {- // A 200 x 100 plate, its bottom left 100 x 60 cut away, then a flange picked on what is left of- // the bottom edge (x 100 … 200): it used to span the whole original edge, x 0 … 200, its left- // half standing beside nothing.- let mut s = Session::default();- run(&mut s, "sheet.manage_rules", json!({"name": "R", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "2 mm", "active": true}));- base(&mut s, 200.0, 100.0);- rectangle_tool(&mut s, "Corner", [-10.0, -10.0], [100.0, 60.0]);- run(&mut s, "solid.extrude", json!({"sketch": "Corner", "through_all": true, "direction": "symmetric", "operation": "cut"}));- assert!((volume(&mut s) - 14_000.0 * 2.0).abs() < 1e-6);- run(&mut s, "sheet.flange", json!({"edges": [[150, 0, 2]], "height": 40, "angle": 90, "radius": 1, "position": "outside"}));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- let f = flat(&mut s);- let bends = f["bends"].as_array().cloned().unwrap_or_default();- assert_eq!(bends.len(), 1, "{f}");- let x = |k: &str| bends[0][k][0].as_f64().unwrap_or(f64::NAN);- assert!(- (x("start") - 100.0).abs() < 1e-9 && (x("end") - 200.0).abs() < 1e-9 && (bends[0]["length"].as_f64().unwrap_or(0.0) - 100.0).abs() < 1e-9,- "{f}"- );- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{f}");- // The flat pattern: the plate less the cut, and the flange (π of bend, 37 of panel) on 100 mm.- assert!((flat_area(&f) - (14_000.0 + 100.0 * (PI + 37.0))).abs() < 1e-6, "{}", flat_area(&f));- // Folded: the bend keeps its volume (K 0.5); the flange stands on x 100 … 200 only.- let want = (14_000.0 + 100.0 * (PI + 37.0)) * 2.0;- assert!((volume(&mut s) - want).abs() < 1e-3 * want, "{} vs {want}", volume(&mut s));- assert!(contains(&s, [150.0, -2.0, 20.0]) && !contains(&s, [50.0, -2.0, 20.0]));- let state = s.model.state();- let body = &state.bodies[0].body;- assert!(body.validity().is_empty() && body.shell_count() == 1);- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({}));- assert!((volume(&mut s) - want).abs() < 1e-3 * want, "{command}: {}", volume(&mut s));- }-}--/// A 200 x 100 plate (2 mm, K 0.5) with `cut`, a rectangle between two corners, cut through it.-fn plate_with_a_cut(s: &mut Session, cut: [[f64; 2]; 2]) {- run(s, "sheet.manage_rules", json!({"name": "R", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "1 mm", "active": true}));- base(s, 200.0, 100.0);- rectangle_tool(s, "Cut", cut[0], cut[1]);- run(s, "solid.extrude", json!({"sketch": "Cut", "through_all": true, "direction": "symmetric", "operation": "cut"}));-}--#[test]-fn edge_flanges_on_either_side_of_a_notch_span_the_side_they_were_picked_on() {- // A notch 40 wide and 30 deep in the middle of the bottom edge leaves x 0 … 80 and 120 … 200 of- // it. A 90° flange 40 high set inside (setback 3, BA π, panel 37) spans the side it was picked- // on and takes its setback off that side alone; picked on both sides, each has its own.- for (edges, sides) in- [(json!([[160, 0, 2]]), [false, true]), (json!([[40, 0, 2]]), [true, false]), (json!([[40, 0, 2], [160, 0, 2]]), [true, true])]- {- let mut s = Session::default();- plate_with_a_cut(&mut s, [[80.0, -10.0], [120.0, 30.0]]);- run(&mut s, "sheet.flange", json!({"edges": edges, "height": 40, "angle": 90}));- assert!(no_errors_or_warnings(&s), "{edges}: {:?}", s.model.results);- let f = flat(&mut s);- let want: Vec<(f64, f64)> = [(0.0, 80.0), (120.0, 200.0)].into_iter().zip(sides).filter_map(|(span, on)| on.then_some(span)).collect();- let bends: Vec<(f64, f64)> = f["bends"]- .as_array()- .cloned()- .unwrap_or_default()- .iter()- .map(|b| (b["start"][0].as_f64().unwrap_or(f64::NAN), b["end"][0].as_f64().unwrap_or(f64::NAN)))- .collect();- assert!(- bends.len() == want.len() && bends.iter().zip(&want).all(|(b, w)| (b.0 - w.0).abs() < 1e-9 && (b.1 - w.1).abs() < 1e-9),- "{edges}: {f}"- );- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{edges}: {f}");- // The plate less the notch, and for each flange 80 × (π + 37) less the 80 × 3 it set back.- let area = 20_000.0 - 40.0 * 30.0 + want.len() as f64 * 80.0 * (PI + 37.0 - 3.0);- assert!((flat_area(&f) - area).abs() < 1e-6, "{edges}: {}", flat_area(&f));- assert!(rel(volume(&mut s), area * 2.0) < 1e-4, "{edges}: {} vs {}", volume(&mut s), area * 2.0);- // A flange stands with its outer face on the edge (y 0 … 2); a side without one keeps the- // base up to the edge, which the bend's round outer corner leaves free.- for (x, on) in [40.0, 160.0].into_iter().zip(sides) {- assert_eq!(contains(&s, [x, 1.0, 20.0]), on, "{edges}: a flange at x {x}");- assert_eq!(contains(&s, [x, 0.2, 0.2]), !on, "{edges}: the base's own edge at x {x}");- }- let state = s.model.state();- let body = &state.bodies[0].body;- assert!(body.validity().is_empty() && body.shell_count() == 1, "{edges}");- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({}));- assert!(rel(volume(&mut s), area * 2.0) < 1e-4, "{edges}, {command}: {}", volume(&mut s));- }- }- // An edge that a cut has taken whole is refused.- let mut s = Session::default();- plate_with_a_cut(&mut s, [[-10.0, -10.0], [210.0, 30.0]]);- let e = s.execute("sheet.flange", &json!({"edges": [[100, 0, 2]], "height": 40})).map(|_| ()).unwrap_err().to_string();- assert!(e.contains("a cut-out has taken that edge away"), "{e}");-}--#[test]-fn an_edge_flange_on_a_flange_runs_along_what_a_flat_cut_left_of_its_far_edge() {- // A 40 high wall on the plate's bottom edge (outside: BA π, panel 37), its far edge at- // y = -(π + 37) in the flat. Unfolded, a cut takes x 0 … 60 of that edge, up to y = -30. A- // 15 high flange picked on the rest of the edge (the wall's inner face is y = -1, its top- // z = 40) spans x 60 … 200.- let mut s = Session::default();- run(&mut s, "sheet.manage_rules", json!({"name": "R", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "1 mm", "active": true}));- base(&mut s, 200.0, 100.0);- run(&mut s, "sheet.flange", json!({"edges": [[100, 0, 2]], "height": 40, "angle": 90, "position": "outside"}));- run(&mut s, "sheet.unfold", json!({}));- rectangle_tool(&mut s, "Corner", [-10.0, -50.0], [60.0, -30.0]);- run(&mut s, "solid.extrude", json!({"sketch": "Corner", "through_all": true, "direction": "symmetric", "operation": "cut"}));- run(&mut s, "sheet.refold", json!({}));- run(&mut s, "sheet.flange", json!({"edges": [[130, -1, 40]], "height": 15, "angle": 90, "position": "outside"}));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- let f = flat(&mut s);- let bends = f["bends"].as_array().cloned().unwrap_or_default();- let spans: Vec<(f64, f64)> =- bends.iter().map(|b| (b["start"][0].as_f64().unwrap_or(f64::NAN), b["end"][0].as_f64().unwrap_or(f64::NAN))).collect();- let close = |a: (f64, f64), b: (f64, f64)| (a.0 - b.0).abs() < 1e-9 && (a.1 - b.1).abs() < 1e-9;- assert!(spans.len() == 2 && close(spans[0], (0.0, 200.0)) && close(spans[1], (60.0, 200.0)), "{f}");- // The plate, the wall less the cut's 60 × (π + 7), and 140 × (π + 12) of the flange on it.- let area = 20_000.0 + 200.0 * (PI + 37.0) - 60.0 * (PI + 7.0) + 140.0 * (PI + 12.0);- assert!((flat_area(&f) - area).abs() < 1e-6, "{}", flat_area(&f));- assert!(rel(volume(&mut s), area * 2.0) < 1e-4, "{} vs {}", volume(&mut s), area * 2.0);- // It lies over the plate from the wall (z 41 … 43, y 0 … 12), on x 60 … 200 only.- assert!(contains(&s, [130.0, 6.0, 42.0]) && !contains(&s, [30.0, 6.0, 42.0]));-}--#[test]-fn a_flange_bent_inside_keeps_the_base_sketchs_arcs_in_the_flat_pattern_and_the_dxf() {- // A 200 x 100 plate with its corners rounded 8, drawn as arcs, and a 40 high flange on its- // bottom edge (2 mm, R 1, K 0.5: setback 3 inside, half of it in the middle; BA π, panel- // 37). With the bend inside or in the middle the base is cut back through the two lower- // arcs: the DXF's outline was about 150 LINEs then, every arc as chords a quarter- // millimetre long, where the bend outside gives 8 LINEs and 4 ARCs.- let h = 8.0 * (1.0 - 0.5f64.sqrt());- // ∫ √(64 − z²): the area under an arc of radius 8, from its centre's height on.- let under = |z: f64| z / 2.0 * (64.0 - z * z).sqrt() + 32.0 * (z / 8.0).asin();- for (position, setback) in [("outside", 0.0f64), ("middle", 3.0 / 2.0), ("inside", 3.0)] {- let mut s = Session::default();- run(&mut s, "sheet.manage_rules", json!({"name": "R", "thickness": "2 mm", "k_factor": "0.5", "bend_radius": "1 mm", "active": true}));- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "S"}));- run(&mut s, "sketch.line", json!({"points": [[8, 0], [192, 0]]}));- run(&mut s, "sketch.arc.three_point", json!({"start": [192, 0], "end": [200, 8], "through": [200.0 - h, h]}));- run(&mut s, "sketch.line", json!({"points": [[200, 8], [200, 92]]}));- run(&mut s, "sketch.arc.three_point", json!({"start": [200, 92], "end": [192, 100], "through": [200.0 - h, 100.0 - h]}));- run(&mut s, "sketch.line", json!({"points": [[192, 100], [8, 100]]}));- run(&mut s, "sketch.arc.three_point", json!({"start": [8, 100], "end": [0, 92], "through": [h, 100.0 - h]}));- run(&mut s, "sketch.line", json!({"points": [[0, 92], [0, 8]]}));- run(&mut s, "sketch.arc.three_point", json!({"start": [0, 8], "end": [8, 0], "through": [h, h]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "S"}));- run(&mut s, "sheet.flange", json!({"edges": [[100, 0, 2]], "height": 40, "angle": 90, "position": position}));- assert!(no_errors_or_warnings(&s), "{position}: {:?}", s.model.results);- let text = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- let shapes = solidcraft_io::read_dxf(&text).unwrap();- let lines = shapes.iter().filter(|g| matches!(g, solidcraft_io::Geom2::Line(..))).count();- let radii: Vec<f64> =- shapes.iter().filter_map(|g| if let solidcraft_io::Geom2::Arc { c, a, .. } = g { Some(c.dist(*a)) } else { None }).collect();- // Eight lines of outline and the bend's centre line; the four corners.- assert_eq!((lines, radii.len(), shapes.len()), (9, 4, 13), "{position}");- assert!(radii.iter().all(|r| (r - 8.0).abs() < 1e-9), "{position}: {radii:?}");- // The plate less what lies below the bend line, ∫ 184 + 2·√(64 − (8 − y)²) from 0 to the- // setback, and the flange along the trimmed edge, which runs from arc to arc.- let below = 184.0 * setback + 2.0 * (under(8.0) - under(8.0 - setback));- let edge = 184.0 + 2.0 * (64.0 - (8.0 - setback) * (8.0 - setback)).sqrt();- let want = 20_000.0 - (4.0 - PI) * 64.0 - below + edge * (PI + 37.0);- let regions = s.model.state().sheets[0].flat_regions().unwrap();- assert!(regions.len() == 1 && (regions[0].area() - want).abs() < 1e-6, "{position}: {} vs {want}", regions[0].area());- let f = flat(&mut s);- assert!((f["bends"][0]["length"].as_f64().unwrap_or(f64::NAN) - edge).abs() < 1e-9, "{position}: {}", f["bends"]);- // Folded it holds the same (K 0.5), and so it does unfolded and folded again.- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!(rel(volume(&mut s), want * 2.0) < 1e-3, "{position} {command:?}: {} vs {}", volume(&mut s), want * 2.0);- }- }-}--#[test]-fn bend_table_exports_shop_dimensions_and_tracks_parameter_changes() {- let mut s = Session::default();- run(&mut s, "sheet.manage_rules", json!({"name": "Shop, \"steel\"", "thickness": 2, "bend_radius": 3, "k_factor": 0.4}));- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2]], "height": 20}));- let undo = s.undo.len();- let csv = run(&mut s, "sheet.export_bend_table", json!({}));- let text = csv["text"].as_str().unwrap();- assert!(text.starts_with("body,rule,thickness_mm,k_factor,bend,angle_deg,direction,"));- assert!(text.contains("\"Shop, \"\"steel\"\"\""), "{text}");- assert_eq!(text.lines().count(), 2);- assert_eq!(csv["bends"], 1);- let exported = run(&mut s, "sheet.export_bend_table", json!({"format": "JSON"}));- let table: Value = serde_json::from_str(exported["text"].as_str().unwrap()).unwrap();- assert_eq!(table["thickness"], 2.0);- assert_eq!(table["bends"][0]["direction"], "up");- assert!((table["bends"][0]["allowance"].as_f64().unwrap() - FRAC_PI_2 * 3.8).abs() < 1e-9);- assert_eq!(s.undo.len(), undo, "export does not create an undo step");- run(&mut s, "sheet.manage_rules", json!({"name": "Shop, \"steel\"", "k_factor": 0.5}));- let updated = run(&mut s, "sheet.export_bend_table", json!({"format": "json"}));- let table: Value = serde_json::from_str(updated["text"].as_str().unwrap()).unwrap();- assert!((table["bends"][0]["allowance"].as_f64().unwrap() - FRAC_PI_2 * 4.0).abs() < 1e-9);- assert!(s.execute("sheet.export_bend_table", &json!({"format": "xml"})).is_err());- assert!(s.execute("sheet.export_bend_table", &json!({"body": "Missing"})).is_err());- let mut empty = Session::default();- assert!(empty.execute("sheet.export_bend_table", &json!({})).is_err());-}--#[test]-fn malformed_fold_points_are_rejected_atomically() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let before = serde_json::to_value(&s.doc).unwrap();- for points in [- json!([[40, 0, 2.5], null, [40, 60, 2.5]]),- json!([[40, 0, 2.5], [40, 60, 2.5], "junk"]),- json!([[40, 0, 2.5], [40, 60]]),- json!([[40, 0, 2.5]]),- json!("not points"),- ] {- assert!(s.execute("sheet.fold", &json!({"points": points})).is_err());- assert_eq!(serde_json::to_value(&s.doc).unwrap(), before);- }-}--#[test]-fn flat_dxf_preserves_exact_cutout_entities() {- use solidcraft_geom::{Loop2, Region2, Seg2, Vec2};- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let mut sh = s.model.state().sheets[0].clone();- sh.holes = vec![Region2 {- outer: Loop2 { segs: vec![Seg2::Arc { center: Vec2::new(40.0, 30.0), radius: 5.0, start: -PI, sweep: -2.0 * PI }] },- holes: Vec::new(),- }];- let dxf = super::flat_dxf(&sh).unwrap();- assert_eq!(dxf.matches("0\nCIRCLE\n").count(), 1, "{dxf}");- assert!(!dxf.contains("0\nARC\n"), "a full circle must not become a zero-length ARC");- let read = solidcraft_io::read_dxf(&dxf).unwrap();- assert_eq!(read.len(), 5);- assert!(read.iter().any(|g| matches!(g, solidcraft_io::Geom2::Circle(c, r) if *c == Vec2::new(40.0, 30.0) && (*r - 5.0).abs() < 1e-9)));- sh.holes[0].outer = Loop2 {- segs: vec![- Seg2::Line { a: Vec2::new(10.0, 10.0), b: Vec2::new(30.0, 10.0) },- Seg2::Arc { center: Vec2::new(20.0, 10.0), radius: 10.0, start: 0.0, sweep: PI },- ],- };- let dxf = super::flat_dxf(&sh).unwrap();- assert_eq!(dxf.matches("0\nLINE\n").count(), 5, "four outline lines and one exact cutout line");- assert_eq!(dxf.matches("0\nARC\n").count(), 1);- assert!(dxf.contains("50\n0.000000\n51\n180.000000\n"));- let read = solidcraft_io::read_dxf(&dxf).unwrap();- assert_eq!(read.len(), 6);- assert!(read.iter().any(|g| matches!(g, solidcraft_io::Geom2::Arc { c, a, b } if *c == Vec2::new(20.0, 10.0) && a.dist(Vec2::new(30.0, 10.0)) < 1e-9 && b.dist(Vec2::new(10.0, 10.0)) < 1e-9)));-}--// A profile chosen by a point outside its inner loop must keep that inner loop through-// sheet construction, flattening and manufacturing export.-#[test]-fn inherited_base_profile_holes_survive_every_sheet_state() {- for flip in [false, true] {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Perforated"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [40, 20], "p1": [60, 40]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Perforated", "profiles": [{"point": [10, 10]}], "flip": flip}));- assert!((volume(&mut s) - 14000.0).abs() < 1e-6);- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 8);- let mut reopened = Session::default();- run(&mut reopened, "sketch.insert_dxf", json!({"text": dxf, "name": "Blank"}));- run(&mut reopened, "sketch.finish", json!({}));- let pick = if flip { [10, -10] } else { [10, 10] };- run(&mut reopened, "solid.extrude", json!({"sketch": "Blank", "profiles": [{"point": pick}], "distance": 2.5}));- assert!((volume(&mut reopened) - 14000.0).abs() < 1e-5);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 14000.0).abs() < 1e-6);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - 14000.0).abs() < 1e-6);- }-}--#[test]-fn edge_notch_uses_the_same_material_boundary_in_solid_flat_and_dxf() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Notch"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [-5, 20], "p1": [10, 40]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Notch", "through_all": true, "operation": "cut", "direction": "symmetric"}));- assert!((volume(&mut s) - 14500.0).abs() < 1e-6);- let f = flat(&mut s);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1));- assert_eq!(f["outline"][0].as_array().map(Vec::len), Some(8));- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(0));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 8);- let mut reopened = Session::default();- run(&mut reopened, "sketch.insert_dxf", json!({"text": dxf, "name": "Blank"}));- run(&mut reopened, "sketch.finish", json!({}));- run(&mut reopened, "solid.extrude", json!({"sketch": "Blank", "distance": 2.5}));- assert!((volume(&mut reopened) - 14500.0).abs() < 1e-5);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 14500.0).abs() < 1e-6);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - 14500.0).abs() < 1e-6);-}--#[test]-fn inherited_round_hole_survives_flange_and_unfold_in_flipped_frames() {- for flip in [false, true] {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Perforated"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.circle.center", json!({"center": [50, 30], "radius": 5}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Perforated", "profiles": [{"point": [10, 10]}], "flip": flip}));- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, if flip { -2.5 } else { 2.5 }]], "height": 20}));- let folded = volume(&mut s);- assert!((folded - (18972.62196081845 - PI * 25.0 * 2.5)).abs() < 0.2, "{folded}");- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1));- let sh = s.model.state().sheets[0].clone();- let regions = sh.flat_regions().unwrap();- assert_eq!(regions[0].holes[0].segs.len(), 2);- assert!(regions[0].holes[0].segs.iter().all(|s| matches!(s, solidcraft_geom::Seg2::Arc { radius, .. } if (*radius - 5.0).abs() < 1e-9)));- let expected = regions.iter().map(solidcraft_geom::Region2::area).sum::<f64>() * 2.5;- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - expected).abs() < 0.1);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - folded).abs() < 0.1);- }-}--fn faces(s: &mut Session) -> (u64, u64) {- let body = run(s, "inspect.measure", json!({}))["bodies"][0].clone();- (body["faces"].as_u64().unwrap(), body["face_types"]["cylinder"].as_u64().unwrap_or(0))-}--#[test]-fn elliptic_cut_out_stays_exact_in_the_flat_pattern_and_follows_arcs_when_folded() {- use solidcraft_geom::Seg2;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- let (uncut, blank) = (volume(&mut s), s.model.state().sheets[0].flat_regions().unwrap()[0].area());- let (plain_faces, plain_cylinders) = faces(&mut s);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Cut"}));- run(&mut s, "sketch.ellipse", json!({"center": [40, 30], "major": [55, 30], "minor_radius": 8}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Cut", "through_all": true, "operation": "cut", "direction": "symmetric"}));- // The ellipse takes π·15·8 of the 2.5 mm sheet (a body's volume is measured on its mesh).- let cut = PI * 15.0 * 8.0;- let folded = volume(&mut s);- assert!((uncut - folded - cut * 2.5).abs() < 0.5, "{}", uncut - folded);- // The flat pattern holds the ellipse itself, so its area is the blank less π·15·8.- let regions = s.model.state().sheets[0].flat_regions().unwrap();- let hole = ®ions[0].holes[0];- assert!(hole.segs.len() == 4 && hole.segs.iter().all(|x| matches!(x, Seg2::Conic { .. })), "{} segments", hole.segs.len());- assert!((regions[0].area() - (blank - cut)).abs() < 1e-9, "{}", regions[0].area());- // The flat pattern JSON lists it as those four curves, one `polyline` each, with every- // point on the ellipse ((x − 40)/15)² + ((y − 30)/8)² = 1.- let shapes = flat(&mut s)["cutout_shapes"].as_array().cloned().unwrap_or_default();- let curves: Vec<Vec<Value>> = shapes[0]["segments"].as_array().into_iter().flatten().filter_map(|x| x["polyline"].as_array().cloned()).collect();- assert!(shapes.len() == 1 && curves.len() == 4 && shapes[0]["segments"].as_array().is_some_and(|a| a.len() == 4), "{} curves", curves.len());- let off = |p: &Value| ((p[0].as_f64().unwrap_or(0.0) - 40.0) / 15.0).powi(2) + ((p[1].as_f64().unwrap_or(0.0) - 30.0) / 8.0).powi(2) - 1.0;- assert!(curves.iter().all(|c| c.len() > 2 && c.iter().all(|p| off(p).abs() < 1e-9)));- // Folded, the cut-out's wall is cylinders over tangent arcs: fewer than half the 264- // chords of 0.001 mm (four quarters of √(2·17/0.008) = 66 each).- let (cut_faces, cut_cylinders) = faces(&mut s);- let wall = cut_faces - plain_faces;- assert!(wall < 132 && cut_cylinders - plain_cylinders + 4 >= wall, "{wall} wall faces, {} cylinders", cut_cylinders - plain_cylinders);- // Unfolded, it is the four conic faces of the ellipse.- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - (blank - cut) * 2.5).abs() < 0.5);- assert_eq!(faces(&mut s).0, regions[0].outer.segs.len() as u64 + 4 + 2);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - folded).abs() < 0.1);-}--#[test]-fn flipped_base_flange_keeps_its_elliptic_outline() {- for flip in [false, true] {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Oval"}));- run(&mut s, "sketch.ellipse", json!({"center": [0, 0], "major": [25, 0], "minor_radius": 12}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Oval", "flip": flip}));- let regions = s.model.state().sheets[0].flat_regions().unwrap();- let outline = ®ions[0].outer.segs;- assert!(- outline.len() == 4 && outline.iter().all(|x| matches!(x, solidcraft_geom::Seg2::Conic { .. })),- "flip {flip}: {} segments",- outline.len()- );- // π·25·12 of the 2.5 mm sheet: exactly in the flat pattern; within 0.5 mm³ in the body,- // which follows the outline by arcs and is measured on its mesh (a 64-sided outline- // would be 3.8 mm³ short).- assert!((regions[0].area() - PI * 300.0).abs() < 1e-9, "flip {flip}: {}", regions[0].area());- assert!((volume(&mut s) - PI * 300.0 * 2.5).abs() < 0.5, "flip {flip}: {}", volume(&mut s));- }-}--#[test]-fn crossing_only_disconnecting_cut_preserves_all_material_states() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Split"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [45, -5], "p1": [55, 65]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Split", "through_all": true, "operation": "cut", "direction": "symmetric"}));- assert!((volume(&mut s) - 13500.0).abs() < 1e-6);- assert_eq!(flat(&mut s)["outline"].as_array().map(Vec::len), Some(2));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- let mut reopened = Session::default();- run(&mut reopened, "sketch.insert_dxf", json!({"text": dxf, "name": "SplitBlank"}));- run(&mut reopened, "sketch.finish", json!({}));- run(&mut reopened, "solid.extrude", json!({"sketch": "SplitBlank", "distance": 2.5}));- assert!((volume(&mut reopened) - 13500.0).abs() < 1e-6);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 13500.0).abs() < 1e-6);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - 13500.0).abs() < 1e-6);-}--#[test]-fn splitting_an_unfolded_flanged_sheet_preserves_both_bent_pieces() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.flange", json!({"edges": [[50,0,2.5]], "height": 20}));- let folded = volume(&mut s);- run(&mut s, "sheet.unfold", json!({}));- let unfolded = volume(&mut s);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "BlankSplit"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [45,-100], "p1": [55,100]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "BlankSplit", "through_all": true, "operation": "cut", "direction": "symmetric"}));- assert!((volume(&mut s) - unfolded * 0.9).abs() < 0.1);- assert_eq!(flat(&mut s)["outline"].as_array().map(Vec::len), Some(2));- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - folded * 0.9).abs() < 0.2);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - unfolded * 0.9).abs() < 0.1);-}--#[test]-fn repeated_and_nested_sheet_cuts_are_redundant() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- for (i, radius) in [3.0, 5.0, 5.0].into_iter().enumerate() {- let name = format!("Hole{i}");- run(&mut s, "sketch.create", json!({"plane": "XY", "name": name}));- run(&mut s, "sketch.circle.center", json!({"center": [20, 30], "radius": radius}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": name, "through_all": true, "operation": "cut", "direction": "symmetric"}));- }- assert!((volume(&mut s) - (6000.0 - PI * 25.0) * 2.5).abs() < 0.1);- assert_eq!(flat(&mut s)["cutouts"].as_array().map(Vec::len), Some(1));-}--#[test]-fn overlapping_round_cuts_keep_exact_union_in_export_and_roundtrip() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- for (i, x) in [20.0, 22.0].into_iter().enumerate() {- let name = format!("Overlap{i}");- run(&mut s, "sketch.create", json!({"plane": "XY", "name": name}));- run(&mut s, "sketch.circle.center", json!({"center": [x, 30], "radius": 5}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": name, "through_all": true, "operation": "cut", "direction": "symmetric"}));- }- let intersection = 50.0 * (0.2f64).acos() - (96.0f64).sqrt();- let expected = (6000.0 - (50.0 * PI - intersection)) * 2.5;- assert!((volume(&mut s) - expected).abs() < 0.1);- assert_eq!(flat(&mut s)["cutouts"].as_array().map(Vec::len), Some(1));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert!(dxf.contains("0\nARC\n"));- let mut reopened = Session::default();- run(&mut reopened, "sketch.insert_dxf", json!({"text": dxf, "name": "Blank"}));- run(&mut reopened, "sketch.finish", json!({}));- run(&mut reopened, "solid.extrude", json!({"sketch": "Blank", "profiles": [{"point": [10, 10]}], "distance": 2.5}));- assert!((volume(&mut reopened) - expected).abs() < 0.1);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - expected).abs() < 0.1);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - expected).abs() < 0.1);-}--#[test]-fn cut_across_a_concave_notch_uses_crossings_not_just_contained_corners() {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "U"}));- run(&mut s, "sketch.line", json!({"points": [[0,0],[100,0],[100,60],[70,60],[70,20],[30,20],[30,60],[0,60],[0,0]]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "U"}));- assert!((volume(&mut s) - 11000.0).abs() < 1e-6);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "ArmNotches"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [20,30], "p1": [80,40]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "ArmNotches", "through_all": true, "operation": "cut", "direction": "symmetric"}));- assert!((volume(&mut s) - 10500.0).abs() < 1e-6);- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(0));- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 10500.0).abs() < 1e-6);-}--#[test]-fn tiny_cut_inside_exact_circle_survives_unfold_refold_and_dxf() {- for initially_flat in [false, true] {- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Disc"}));- run(&mut s, "sketch.circle.center", json!({"center": [0,0], "radius": 10}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Disc"}));- let circle = s.model.state().sheets[0].base.outer.clone();- let displayed = circle.polyline(1e-3);- let at = (displayed[0] + displayed[1]).normalized().unwrap() * 9.9998;- assert!(!circle.contains(at));- if initially_flat {- run(&mut s, "sheet.unfold", json!({}));- }- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "TinyCut"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [at.x-0.000025,at.y-0.000025], "p1": [at.x+0.000025,at.y+0.000025]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "TinyCut", "through_all": true, "operation": "cut", "direction": "symmetric"}));- for stage in ["sheet.unfold", "sheet.refold"] {- let regions = s.model.state().sheets[0].flat_regions().unwrap();- assert_eq!(regions[0].holes.len(), 1);- assert!((regions[0].holes[0].signed_area().abs() - 2.5e-9).abs() < 1e-13);- assert_eq!(s.model.state().bodies.len(), 1);- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert_eq!(solidcraft_io::read_dxf(&dxf).unwrap().len(), 5);- if stage == "sheet.unfold" && initially_flat {- run(&mut s, "sheet.refold", json!({}));- }- run(&mut s, stage, json!({}));- }- assert_eq!(s.model.state().sheets[0].flat_regions().unwrap()[0].holes.len(), 1);- }-}--#[test]-fn unrelated_box_cut_preserves_logical_ring_sheet_compound() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let sheet_name = s.model.state().sheets[0].body.clone();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Ring"}));- for radius in [10, 5] {- run(&mut s, "sketch.circle.center", json!({"center": [50,30], "radius": radius}));- }- run(&mut s, "sketch.finish", json!({}));- run(- &mut s,- "solid.extrude",- json!({"sketch": "Ring", "profiles": [{"point": [57,30]}], "through_all": true, "operation": "cut", "direction": "symmetric"}),- );- let material = s.model.state().sheets[0].flat_regions().unwrap();- run(&mut s, "solid.box", json!({"length": 20, "width": 20, "height": 10, "corner": [200,0,0], "body_name": "SeparateBox"}));- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "BoxCut"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [205,5], "p1": [210,10]}));- run(&mut s, "sketch.finish", json!({}));- run(- &mut s,- "solid.extrude",- json!({"sketch": "BoxCut", "participants": ["SeparateBox"], "through_all": true, "operation": "cut", "direction": "symmetric"}),- );- assert_eq!(s.model.state().bodies.len(), 2);- assert_eq!(s.model.state().sheets[0].flat_regions().unwrap(), material);- for stage in ["sheet.unfold", "sheet.refold"] {- run(&mut s, stage, json!({"body": sheet_name}));- assert_eq!(s.model.state().bodies.len(), 2);- let state = s.model.state();- let body = &state.bodies.iter().find(|b| b.name == sheet_name).unwrap().body;- assert!(body.contains(solidcraft_geom::Vec3::new(50.0, 30.0, 1.25)));- assert!(!body.contains(solidcraft_geom::Vec3::new(57.0, 30.0, 1.25)));- }-}--#[test]-fn specialized_sheet_cuts_respect_component_and_explicit_participants() {- for explicit in [false, true] {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- run(&mut s, "component.create", json!({"name": "Other"}));- run(&mut s, "solid.box", json!({"length": 100, "width": 60, "height": 10, "body_name": "OtherBox"}));- if explicit {- run(&mut s, "component.activate", json!({"component": "root"}));- }- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Cut"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [20,20], "p1": [30,30]}));- run(&mut s, "sketch.finish", json!({}));- let mut params = json!({"sketch": "Cut", "through_all": true, "operation": "cut", "direction": "symmetric"});- if explicit {- params["participants"] = json!(["OtherBox"]);- }- run(&mut s, "solid.extrude", params);- let m = run(&mut s, "inspect.measure", json!({"bodies": [name]}));- assert!((m["total"]["volume_mm3"].as_f64().unwrap() - 15000.0).abs() < 1e-6);- assert!(s.model.state().sheets[0].holes.is_empty());- let m = run(&mut s, "inspect.measure", json!({"bodies": ["OtherBox"]}));- assert!((m["total"]["volume_mm3"].as_f64().unwrap() - 59000.0).abs() < 1e-6);- }-}--#[test]-fn ring_cut_preserves_retained_island_through_unfold_and_refold() {- fn material_probes(s: &Session) {- let body = &s.model.state().bodies[0].body;- assert!(body.contains(solidcraft_geom::Vec3::new(50.0, 30.0, 1.25)));- assert!(!body.contains(solidcraft_geom::Vec3::new(57.0, 30.0, 1.25)));- assert!(body.contains(solidcraft_geom::Vec3::new(65.0, 30.0, 1.25)));- }- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Ring"}));- run(&mut s, "sketch.circle.center", json!({"center": [50,30], "radius": 10}));- run(&mut s, "sketch.circle.center", json!({"center": [50,30], "radius": 5}));- run(&mut s, "sketch.finish", json!({}));- run(- &mut s,- "solid.extrude",- json!({"sketch": "Ring", "profiles": [{"point": [57,30]}], "through_all": true, "operation": "cut", "direction": "symmetric"}),- );- let expected = (6000.0 - PI * 75.0) * 2.5;- assert!((volume(&mut s) - expected).abs() < 0.2);- material_probes(&s);- assert_eq!(flat(&mut s)["outline"].as_array().map(Vec::len), Some(2));- let regions = s.model.state().sheets[0].flat_regions().unwrap();- assert!(regions.iter().any(|r| r.contains(solidcraft_geom::Vec2::new(50.0, 30.0))));- assert!(!regions.iter().any(|r| r.contains(solidcraft_geom::Vec2::new(57.0, 30.0))));- assert!(regions.iter().any(|r| r.contains(solidcraft_geom::Vec2::new(65.0, 30.0))));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- let mut reopened = Session::default();- run(&mut reopened, "sketch.insert_dxf", json!({"text": dxf, "name": "RingBlank"}));- run(&mut reopened, "sketch.finish", json!({}));- run(&mut reopened, "solid.extrude", json!({"sketch": "RingBlank", "profiles": [{"point": [10,10]}, {"point": [50,30]}], "distance": 2.5}));- assert!((volume(&mut reopened) - expected).abs() < 0.2);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - expected).abs() < 0.2);- material_probes(&s);- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - expected).abs() < 0.2);- material_probes(&s);-}--fn retained_depth_check(s: &mut Session, want: f64, z0: f64, z1: f64) {- use solidcraft_geom::Vec3;- assert!((volume(s) - want).abs() < 1e-6, "{} vs {want}", volume(s));- let state = s.model.state();- assert_eq!(state.sheets.len(), 1);- assert_eq!(state.sheets[0].t, 2.5, "rule stock gauge is preserved");- assert!(state.bodies.iter().any(|b| b.body.contains(Vec3::new(25.0, 25.0, (z0 + z1) * 0.5))));- assert!(!state.bodies.iter().any(|b| b.body.contains(Vec3::new(25.0, 25.0, z0 - 0.1))));- assert!(!state.bodies.iter().any(|b| b.body.contains(Vec3::new(25.0, 25.0, z1 + 0.1))));- assert!(!state.bodies.iter().any(|b| b.body.contains(Vec3::new(10.0, 25.0, (z0 + z1) * 0.5))));- let bounds = state.bodies[0].mesh().bounds();- assert!((bounds.min.z - z0).abs() < 1e-8 && (bounds.max.z - z1).abs() < 1e-8, "{bounds:?}");-}--fn depth_step_reopen(s: &mut Session, suffix: &str, want: f64, inside: solidcraft_geom::Vec3, outside: solidcraft_geom::Vec3) {- let path = std::env::temp_dir().join(format!("solidcraft-depth-intersect-{suffix}-{}.step", std::process::id()));- run(s, "file.export", json!({"path":path.to_string_lossy()}));- let mut imported = Session::default();- run(&mut imported, "doc.open", json!({"path":path.to_string_lossy()}));- assert!((volume(&mut imported) - want).abs() < 1e-6);- assert!(imported.model.state().bodies.iter().any(|b| b.body.contains(inside)));- assert!(!imported.model.state().bodies.iter().any(|b| b.body.contains(outside)));- std::fs::remove_file(path).unwrap();-}--/// The generic sketch importer intentionally drops DXF layers/depth. Reimport only the-/// material outline at a separately known depth, never pretend all entities reconstruct3D.-fn dxf_outline_only(text: &str) -> String {- let lines: Vec<_> = text.lines().collect();- let pairs: Vec<_> = lines.as_chunks::<2>().0.iter().filter_map(|p| Some((p.first()?.trim(), *p.get(1)?))).collect();- let mut out = String::from("0\nSECTION\n2\nENTITIES\n");- let mut start = 0;- for end in 1..=pairs.len() {- if end == pairs.len() || pairs.get(end).is_some_and(|p| p.0 == "0") {- let entity = &pairs[start..end];- if entity.first().is_some_and(|p| matches!(p.1, "LINE" | "ARC" | "CIRCLE")) && entity.iter().any(|p| p.0 == "8" && p.1 == "OUTLINE") {- for (code, value) in entity {- out.push_str(&format!("{code}\n{value}\n"));- }- }- start = end;- }- }- out.push_str("0\nENDSEC\n0\nEOF\n");- out-}--#[test]-fn partial_depth_intersect_retains_bottom_top_and_middle_material_through_history_and_exports() {- use solidcraft_geom::Vec3;- for (offset, z0, z1, layers) in [- (0.0, 0.0, 1.0, vec![("top", 1.0, 2.5)]),- (1.5, 1.5, 2.5, vec![("bottom", 0.0, 1.5)]),- (0.5, 0.5, 1.5, vec![("bottom", 0.0, 0.5), ("top", 1.5, 2.5)]),- ] {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "RetainDepth", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"RetainDepth","distance":1,"start_offset":offset,"operation":"intersect","name":"RetainSlab"}));- retained_depth_check(&mut s, 100.0, z0, z1);- let exported = flat(&mut s);- assert_eq!(exported["thickness"], 2.5);- assert_eq!(exported["pockets"].as_array().unwrap().len(), layers.len());- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- for (side, a, b) in &layers {- assert!(- exported["pockets"]- .as_array()- .unwrap()- .iter()- .any(|p| p["side"] == *side && p["z0_mm"] == *a && p["z1_mm"] == *b && p["depth_mm"] == b - a)- );- assert!(dxf.contains(&format!("POCKET_{}_Z{a:.6}_TO_{b:.6}_MM", side.to_uppercase())));- }- let outline = dxf_outline_only(&dxf);- assert_eq!(solidcraft_io::read_dxf(&outline).unwrap().len(), 4);- let mut outline_import = Session::default();- run(&mut outline_import, "sketch.insert_dxf", json!({"text":outline,"name":"Outline"}));- run(&mut outline_import, "sketch.finish", json!({}));- run(&mut outline_import, "solid.extrude", json!({"distance":1}));- assert!((volume(&mut outline_import) - 100.0).abs() < 1e-6);- run(&mut s, "edit.undo", json!({}));- assert!((volume(&mut s) - 15000.0).abs() < 1e-6);- run(&mut s, "edit.redo", json!({}));- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({}));- retained_depth_check(&mut s, 100.0, z0, z1);- assert_eq!(flat(&mut s)["pockets"], exported["pockets"]);- }- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- retained_depth_check(&mut reopened, 100.0, z0, z1);- depth_step_reopen(&mut s, &format!("offset{offset}"), 100.0, Vec3::new(25.0, 25.0, (z0 + z1) * 0.5), Vec3::new(25.0, 25.0, z1 + 0.1));- }-}--#[test]-fn partial_depth_intersect_preserves_prior_pockets_and_actual_interval_intersections() {- use solidcraft_geom::Vec3;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "OldPocket", [20.0, 20.0], [25.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"OldPocket","distance":1,"operation":"cut"}));- rectangle_tool(&mut s, "RetainDepth", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"RetainDepth","distance":1,"start_offset":0.5,"operation":"intersect"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!((volume(&mut s) - 75.0).abs() < 1e-6);- let state = s.model.state();- let body = &state.bodies[0].body;- assert!(!body.contains(Vec3::new(22.0, 25.0, 0.75)));- assert!(body.contains(Vec3::new(22.0, 25.0, 1.25)));- assert!(body.contains(Vec3::new(27.0, 25.0, 0.75)));- assert!(!body.contains(Vec3::new(27.0, 25.0, 0.25)));- }- let records = s.model.state().sheets[0].pockets.clone();- run(&mut s, "solid.extrude", json!({"sketch":"RetainDepth","distance":1.5,"start_offset":0.25,"operation":"intersect"}));- assert!((volume(&mut s) - 75.0).abs() < 1e-6);- assert_eq!(s.model.state().sheets[0].pockets, records, "no-change leaves replay work unchanged");- run(&mut s, "solid.extrude", json!({"sketch":"RetainDepth","distance":0.25,"start_offset":1.0,"operation":"intersect"}));- assert!((volume(&mut s) - 25.0).abs() < 1e-6);- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - 25.0).abs() < 1e-6);- let mut cold = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((volume(&mut cold) - 25.0).abs() < 1e-6);- depth_step_reopen(&mut s, "prior", 25.0, Vec3::new(22.0, 25.0, 1.125), Vec3::new(22.0, 25.0, 0.75));-}--#[test]-fn partial_depth_intersect_keeps_disconnected_tool_islands_and_annular_curves() {- use solidcraft_geom::Vec3;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Islands", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "sketch.edit", json!({"sketch":"Islands"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[60,20],"p1":[70,30]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch":"Islands","distance":1,"operation":"intersect"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!((volume(&mut s) - 200.0).abs() < 1e-6);- assert_eq!(s.model.state().sheets[0].flat_regions().unwrap().len(), 2);- for x in [25.0, 65.0] {- assert!(s.model.state().bodies[0].body.contains(Vec3::new(x, 25.0, 0.5)));- }- assert!(!s.model.state().bodies[0].body.contains(Vec3::new(45.0, 25.0, 0.5)));- }- depth_step_reopen(&mut s, "islands", 200.0, Vec3::new(65.0, 25.0, 0.5), Vec3::new(45.0, 25.0, 0.5));- let mut ring = Session::default();- base(&mut ring, 100.0, 60.0);- run(&mut ring, "sketch.create", json!({"plane":"XY","name":"Ring"}));- for radius in [10.0, 5.0] {- run(&mut ring, "sketch.circle.center", json!({"center":[50,30],"radius":radius}));- }- run(&mut ring, "sketch.finish", json!({}));- run(&mut ring, "solid.extrude", json!({"sketch":"Ring","profiles":[{"point":[57,30]}],"distance":1,"operation":"intersect"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut ring, command, json!({}));- }- let state = ring.model.state();- let area: f64 = state.sheets[0].flat_regions().unwrap().iter().map(|r| r.area()).sum();- assert!((area - 75.0 * PI).abs() < 1e-8);- assert!((volume(&mut ring) - 75.0 * PI).abs() < 0.1);- assert!(state.bodies[0].body.contains(Vec3::new(57.0, 30.0, 0.5)));- assert!(!state.bodies[0].body.contains(Vec3::new(50.0, 30.0, 0.5)));- assert!(!state.bodies[0].body.contains(Vec3::new(57.0, 30.0, 1.5)));- }- let dxf = run(&mut ring, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap().to_string();- assert!(dxf.contains("POCKET_TOP_Z1.000000_TO_2.500000_MM"));- assert_eq!(solidcraft_io::read_dxf(&dxf_outline_only(&dxf)).unwrap().len(), 2);-}--#[test]-fn partial_depth_intersect_deletes_material_already_removed_by_a_pocket_atomically() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "Removed", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Removed","distance":1,"operation":"cut"}));- run(&mut s, "solid.extrude", json!({"sketch":"Removed","distance":1,"operation":"intersect"}));- assert!(s.model.state().bodies.is_empty());- assert!(s.model.state().sheets.is_empty());- run(&mut s, "edit.undo", json!({}));- assert!((volume(&mut s) - 14900.0).abs() < 1e-6);- run(&mut s, "edit.redo", json!({}));- assert!(s.model.state().bodies.is_empty());-}--#[test]-fn partial_depth_intersect_flipped_tool_and_transferred_sheet_keep_depth_side_and_world_pose() {- use solidcraft_geom::Vec3;- let mut flipped = Session::default();- base(&mut flipped, 100.0, 60.0);- run(&mut flipped, "sketch.create", json!({"name":"FlippedTool","plane":{"origin":[0,0,2.5],"x_dir":[1,0,0],"y_dir":[0,-1,0]}}));- run(&mut flipped, "sketch.rectangle.two_point", json!({"p0":[20,-30],"p1":[30,-20]}));- run(&mut flipped, "sketch.finish", json!({}));- run(&mut flipped, "solid.extrude", json!({"sketch":"FlippedTool","distance":1,"operation":"intersect"}));- retained_depth_check(&mut flipped, 100.0, 1.5, 2.5);- assert_eq!(flat(&mut flipped)["pockets"][0]["side"], "bottom");- assert_eq!(flat(&mut flipped)["pockets"][0]["depth_mm"], 1.5);- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- rectangle_tool(&mut s, "RetainDepth", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"RetainDepth","distance":1,"start_offset":0.5,"operation":"intersect","name":"RetainSlab"}));- let before = s.world_state().bodies[0].mesh().bounds();- let name = s.model.state().sheets[0].body.clone();- let destination = run(&mut s, "component.create", json!({"name":"Destination","parent":0}));- let owner = destination["component"].as_u64().unwrap();- let occurrence = destination["occurrence"].as_u64().unwrap();- run(&mut s, "occurrence.move", json!({"occurrence":occurrence,"translate":[30,20,10],"axis":[1,0,0],"angle":"90 deg","capture":true}));- run(&mut s, "component.move_bodies", json!({"component":owner,"bodies":[name]}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- let state = s.model.state();- let sh = &state.sheets[0];- assert_eq!(sh.t, 2.5);- assert!(sh.frame.origin.dist(Vec3::new(-30.0, -10.0, 20.0)) < 1e-8);- assert!(sh.frame.normal().dist(Vec3::Y) < 1e-8);- assert_eq!(sh.pockets.len(), 2);- assert_eq!(state.body(&name).unwrap().component, owner);- assert!(state.body(&name).unwrap().transferred);- let world = s.world_state();- let body = &world.body(&name).unwrap().body;- assert!(body.contains(Vec3::new(25.0, 25.0, 1.0)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.25)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 2.0)));- let bounds = world.body(&name).unwrap().mesh().bounds();- assert!(before.min.dist(bounds.min) < 1e-8 && before.max.dist(bounds.max) < 1e-8);- assert!((solidcraft_kernel::measure(body).unwrap().volume - 100.0).abs() < 1e-6);- }- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- let reopened_world = reopened.world_state();- let body = &reopened_world.body(&name).unwrap().body;- assert!(body.contains(Vec3::new(25.0, 25.0, 1.0)));- assert!((solidcraft_kernel::measure(body).unwrap().volume - 100.0).abs() < 1e-6);- run(&mut reopened, "timeline.edit", json!({"feature":"RetainSlab","set":{"extent":{"distance":"1.5"}}}));- let world = reopened.world_state();- let body = &world.body(&name).unwrap().body;- assert!((solidcraft_kernel::measure(body).unwrap().volume - 150.0).abs() < 1e-6);- assert!(body.contains(Vec3::new(25.0, 25.0, 1.75)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 2.25)));-}--#[test]-fn partial_depth_intersect_full_gauge_in_rotated_frames_does_not_invent_pockets() {- use solidcraft_geom::Vec3;- for (angle, translate) in [(37.0, [30.0, 20.0, 10.0]), (121.0, [12345.678, 98765.432, 4321.123])] {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- let destination = run(&mut s, "component.create", json!({"name":"Destination","parent":0}));- let owner = destination["component"].as_u64().unwrap();- run(- &mut s,- "occurrence.move",- json!({"occurrence":destination["occurrence"],"translate":translate,"axis":[1,2,3],"angle":format!("{angle} deg"),"capture":true}),- );- run(&mut s, "component.move_bodies", json!({"component":owner,"bodies":[name]}));- run(&mut s, "component.activate", json!({"component":owner}));- run(&mut s, "sketch.create", json!({"name":"WorldTool","plane":{"origin":[0,0,0],"x_dir":[1,0,0],"y_dir":[0,1,0]}}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[20,20],"p1":[30,30]}));- run(&mut s, "sketch.finish", json!({}));- let mut tool_session = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- // The witness is built in the sketch's own component, so its caps lie in the sketch's frame.- run(&mut tool_session, "component.activate", json!({"component":owner}));- run(&mut tool_session, "solid.extrude", json!({"sketch":"WorldTool","distance":2.5,"body_name":"CapWitness"}));- let witness_state = tool_session.model.state();- let witness = &witness_state.body("CapWitness").unwrap().body;- let tool_plane = witness_state.sketches.last().unwrap().plane;- let sources = witness.face_sources().unwrap();- assert_eq!(sources.len(), witness.face_count());- let mut cap_count = 0;- for (index, source) in sources.iter().enumerate() {- if let Some(solidcraft_kernel::FaceSource::CertifiedExtrudeCap { high, plane, .. }) = source {- cap_count += 1;- let current = witness.planar_face(index).unwrap();- assert!(current.normal().cross(tool_plane.normal()).len() < 1e-10);- assert!((current.origin - plane.origin).dot(tool_plane.normal()).abs() < 1e-8);- assert!(((plane.origin - tool_plane.origin).dot(tool_plane.normal()) - if *high { 2.5 } else { 0.0 }).abs() < 1e-8);- }- }- assert_eq!(cap_count, 2);- run(&mut s, "solid.extrude", json!({"sketch":"WorldTool","distance":2.5,"operation":"intersect","name":"PostTransferRetain"}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert!(s.model.state().sheets[0].pockets.is_empty(), "full gauge must not acquire roundoff-depth pockets");- let world = s.world_state();- let body = &world.body(&name).unwrap().body;- assert!((solidcraft_kernel::measure(body).unwrap().volume - 250.0).abs() < 1e-5);- assert!(body.contains(Vec3::new(25.0, 25.0, 0.1)));- assert!(body.contains(Vec3::new(25.0, 25.0, 2.4)));- assert!(!body.contains(Vec3::new(10.0, 25.0, 1.0)));- }- let mut cold = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!(cold.model.state().sheets[0].pockets.is_empty());- assert!(flat(&mut cold)["pockets"].as_array().unwrap().is_empty());- run(&mut s, "timeline.edit", json!({"feature":"PostTransferRetain","set":{"extent":{"distance":"1","start_offset":"0.5"}}}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({}));- }- assert_eq!(s.model.state().sheets[0].pockets.len(), 2);- let world = s.world_state();- let body = &world.body(&name).unwrap().body;- let measured = solidcraft_kernel::measure(body).unwrap().volume;- assert!((measured - 100.0).abs() < 1e-5, "retained volume {measured}");- assert!(body.contains(Vec3::new(25.0, 25.0, 1.0)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.1)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 2.4)));- }- let cold = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- let world = cold.world_state();- let body = &world.body(&name).unwrap().body;- assert!((solidcraft_kernel::measure(body).unwrap().volume - 100.0).abs() < 1e-5);- assert!(body.contains(Vec3::new(25.0, 25.0, 1.0)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.1)));- }-}--#[test]-fn partial_depth_intersect_planar_to_object_retains_current_target_depth() {- use solidcraft_geom::Vec3;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- run(&mut s, "solid.box", json!({"corner":[200,0,1.5],"length":10,"width":10,"height":1,"body_name":"Roof"}));- rectangle_tool(&mut s, "Tool", [20.0, 20.0], [30.0, 30.0]);- run(&mut s, "solid.extrude", json!({"sketch":"Tool","to":[205,5,1.5],"start_offset":0.5,"operation":"intersect","participants":[name]}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({"body":name}));- }- let state = s.model.state();- let body = &state.body(&name).unwrap().body;- assert!((solidcraft_kernel::measure(body).unwrap().volume - 100.0).abs() < 1e-6);- assert!(body.contains(Vec3::new(25.0, 25.0, 1.0)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.1)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 2.0)));- assert_eq!(state.sheets[0].pockets.len(), 2);- assert!((solidcraft_kernel::measure(&state.body("Roof").unwrap().body).unwrap().volume - 100.0).abs() < 1e-6);- }- let cold = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((solidcraft_kernel::measure(&cold.model.state().body(&name).unwrap().body).unwrap().volume - 100.0).abs() < 1e-6);-}--#[test]-fn partial_depth_intersect_curved_to_object_refuses_unrepresentable_depth_atomically() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- run(&mut s, "solid.cylinder", json!({"base":[25,20,12],"axis":[0,1,0],"radius":11,"height":10,"body_name":"CurvedRoof"}));- rectangle_tool(&mut s, "Tool", [24.0, 23.0], [26.0, 27.0]);- let before = s.doc.to_json();- let error =- s.execute("solid.extrude", &json!({"sketch":"Tool","to":[36,25,12],"operation":"intersect","participants":[name]})).unwrap_err().to_string();- assert!(error.contains("sheet machining"), "{error}");- assert_eq!(s.doc.to_json(), before);- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({"body":name}));- }- let state = s.model.state();- assert!((solidcraft_kernel::measure(&state.body(&name).unwrap().body).unwrap().volume - 15000.0).abs() < 1e-6);- assert!(state.sheets[0].pockets.is_empty());- }-}--#[test]-fn partial_depth_intersect_curved_to_object_preserves_current_trimmed_cap_footprint() {- use solidcraft_geom::Vec3;- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- run(&mut s, "solid.cylinder", json!({"base":[25,25,0],"axis":[0,0,1],"radius":2,"height":20,"body_name":"CurvedRoof"}));- run(&mut s, "solid.box", json!({"corner":[19,19,1],"length":12,"width":12,"height":1,"body_name":"StopPlate"}));- run(&mut s, "solid.combine", json!({"target":"CurvedRoof","tools":["StopPlate"],"operation":"join"}));- rectangle_tool(&mut s, "Tool", [20.0, 20.0], [30.0, 30.0]);- let mut tool_session = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- run(&mut tool_session, "solid.extrude", json!({"sketch":"Tool","to":[27,25,10],"body_name":"TrimWitness"}));- let ts = tool_session.model.state();- let witness = &ts.body("TrimWitness").unwrap().body;- assert!((solidcraft_kernel::measure(witness).unwrap().volume - (100.0 - 4.0 * std::f64::consts::PI)).abs() < 0.01);- assert!(witness.contains(Vec3::new(21.0, 21.0, 0.5)));- assert!(!witness.contains(Vec3::new(25.0, 25.0, 0.5)));- run(&mut s, "solid.extrude", json!({"sketch":"Tool","to":[27,25,10],"operation":"intersect","participants":[name]}));- for command in [None, Some("sheet.unfold"), Some("sheet.refold")] {- if let Some(command) = command {- run(&mut s, command, json!({"body":name}));- }- let state = s.model.state();- let body = &state.body(&name).unwrap().body;- let measured = solidcraft_kernel::measure(body).unwrap().volume;- assert!((measured - (100.0 - 4.0 * std::f64::consts::PI)).abs() < 0.01);- let area: f64 = state.sheets[0].flat_regions().unwrap().iter().map(|r| r.area()).sum();- assert!((area - (100.0 - 4.0 * std::f64::consts::PI)).abs() < 1e-8);- assert!(body.contains(Vec3::new(21.0, 21.0, 0.5)));- assert!(!body.contains(Vec3::new(25.0, 25.0, 0.5)));- assert!(!body.contains(Vec3::new(21.0, 21.0, 1.5)));- }- let cold = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!(!cold.model.state().body(&name).unwrap().body.contains(Vec3::new(25.0, 25.0, 0.5)));- let dxf = run(&mut s, "sheet.export_dxf", json!({"body":name}))["dxf"].as_str().unwrap().to_string();- assert!(dxf.contains("POCKET_TOP_Z1.000000_TO_2.500000_MM"));- let outline = dxf_outline_only(&dxf);- assert_eq!(solidcraft_io::read_dxf(&outline).unwrap().len(), 5);- let mut outline_import = Session::default();- run(&mut outline_import, "sketch.insert_dxf", json!({"text":outline,"name":"Outline"}));- run(&mut outline_import, "sketch.finish", json!({}));- run(&mut outline_import, "solid.extrude", json!({"distance":1,"profiles":[{"point":[21,21]}]}));- assert!((volume(&mut outline_import) - (100.0 - 4.0 * std::f64::consts::PI)).abs() < 0.01);- assert!(!outline_import.model.state().bodies[0].body.contains(Vec3::new(25.0, 25.0, 0.5)));- let path = std::env::temp_dir().join(format!("solidcraft-current-trim-cap-{}.step", std::process::id()));- run(&mut s, "file.export", json!({"path":path.to_string_lossy(),"bodies":[name]}));- let mut imported = Session::default();- run(&mut imported, "doc.open", json!({"path":path.to_string_lossy()}));- assert!((volume(&mut imported) - (100.0 - 4.0 * std::f64::consts::PI)).abs() < 0.01);- assert!(!imported.model.state().bodies[0].body.contains(Vec3::new(25.0, 25.0, 0.5)));- std::fs::remove_file(path).unwrap();-}--#[test]-fn partial_depth_intersect_sub_extrusion_resolution_layers_refuse_atomically() {- for (distance, offset) in [(2.5 - 1e-8, 1e-8), (2.5 - 1e-8, 0.0), (1e-8, 0.0)] {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let name = s.model.state().sheets[0].body.clone();- let destination = run(&mut s, "component.create", json!({"name":"Far","parent":0}));- let owner = destination["component"].as_u64().unwrap();- run(- &mut s,- "occurrence.move",- json!({"occurrence":destination["occurrence"],"translate":[12345.678,98765.432,4321.123],"axis":[1,2,3],"angle":"121 deg","capture":true}),- );- run(&mut s, "component.move_bodies", json!({"component":owner,"bodies":[name]}));- run(&mut s, "component.activate", json!({"component":owner}));- run(&mut s, "sketch.create", json!({"name":"Tool","plane":{"origin":[0,0,0],"x_dir":[1,0,0],"y_dir":[0,1,0]}}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0":[20,20],"p1":[30,30]}));- run(&mut s, "sketch.finish", json!({}));- let before = s.doc.to_json();- let error = s- .execute("solid.extrude", &json!({"sketch":"Tool","distance":distance,"start_offset":offset,"operation":"intersect"}))- .unwrap_err()- .to_string();- assert!(error.contains("resolution") || error.contains("distance is zero") || error.contains("sheet machining"), "{error}");- assert_eq!(s.doc.to_json(), before);- assert!(s.model.state().sheets[0].pockets.is_empty());- assert!((solidcraft_kernel::measure(&s.world_state().body(&name).unwrap().body).unwrap().volume - 15000.0).abs() < 1e-5);- }-}--/// A 0.8 mm steel rule and a base flange from a closed outline on XY (the sheet spans z 0..0.8).-fn outline_blank(s: &mut Session, outline: Value) {- run(s, "sheet.manage_rules", json!({"name": "Steel 0.8", "thickness": "0.8", "active": true}));- run(s, "sketch.create", json!({"plane": "XY", "name": "Blank"}));- run(s, "sketch.line", json!({"points": outline, "closed": true}));- run(s, "sketch.finish", json!({}));- run(s, "sheet.flange", json!({"sketch": "Blank"}));-}--/// A 100 x 40 blank with two 15 mm tabs on its right edge (y 5..12 and y 28..35), on one bend line.-fn two_tab_blank(s: &mut Session) {- outline_blank(- s,- json!([[0, 0], [100, 0], [100, 5], [115, 5], [115, 12], [100, 12], [100, 28], [115, 28], [115, 35], [100, 35], [100, 40], [0, 40]]),- );-}--/// Folding one tab must not be refused because another tab lies on the same line (#264).-#[test]-fn fold_one_of_two_collinear_tabs() {- let mut s = Session::default();- two_tab_blank(&mut s);- let flat = volume(&mut s);- run(&mut s, "sheet.fold", json!({"points": [[107, 5, 0.8], [107, 12, 0.8]], "fixed": [50, 20, 0.8]}));- assert!(rel(volume(&mut s), flat) < 1e-3, "a fold keeps the material");-}--/// One fold line across both tabs bends both (#264).-#[test]-fn fold_across_two_collinear_tabs() {- let mut s = Session::default();- two_tab_blank(&mut s);- let flat = volume(&mut s);- run(&mut s, "sheet.fold", json!({"points": [[107, 5, 0.8], [107, 35, 0.8]], "fixed": [50, 20, 0.8]}));- assert!(rel(volume(&mut s), flat) < 1e-3);- let bb = &run(&mut s, "inspect.measure", json!({}))["bodies"][0]["bbox"];- assert!(bb["max"][2].as_f64().unwrap() > 7.0, "both tabs stand up: {bb}");-}--/// Edge flanges on both tab ends in one feature (two separate features already work) (#264).-#[test]-fn edge_flanges_on_two_collinear_tab_ends_in_one_feature() {- let mut s = Session::default();- two_tab_blank(&mut s);- run(&mut s, "sheet.flange", json!({"edges": [[115, 8, 0.8], [115, 31, 0.8]], "height": "10"}));- let mut separate = Session::default();- two_tab_blank(&mut separate);- run(&mut separate, "sheet.flange", json!({"edges": [[115, 8, 0.8]], "height": "10"}));- run(&mut separate, "sheet.flange", json!({"edges": [[115, 31, 0.8]], "height": "10"}));- assert!(rel(volume(&mut s), volume(&mut separate)) < 1e-6);-}--/// A 160 x 30 bar with a 20 x 30 leg standing past its top edge at the left end (2 mm, R 1,-/// K 0.5, so folding keeps the volume): a base flange, or a plate converted to sheet metal.-fn bar_with_leg(s: &mut Session, converted: bool) {- run(s, "sheet.manage_rules", json!({"name": "AL2", "thickness": "2 mm", "k_factor": 0.5, "bend_radius": "1 mm", "active": true}));- run(s, "sketch.create", json!({"plane": "XY", "name": "Bar"}));- run(s, "sketch.line", json!({"points": [[0, 0], [160, 0], [160, 30], [20, 30], [20, 60], [0, 60]], "closed": true}));- run(s, "sketch.finish", json!({}));- if converted {- run(s, "solid.extrude", json!({"sketch": "Bar", "distance": 2, "body_name": "Plate"}));- run(s, "sheet.convert", json!({"body": "Plate", "face": [80, 15, 2]}));- } else {- run(s, "sheet.flange", json!({"sketch": "Bar"}));- }-}--/// An edge flange takes its setback off its own edge only: the leg standing past the edge's end-/// stays, and the rule's bend relief frees the bend and the flange from it.-#[test]-fn an_edge_flange_beside_a_leg_of_the_base_trims_its_own_edge_and_relieves_its_bend() {- // Bend allowance (π/2)·(R + K·T) = π; the rule's relief is Thickness wide, half of it deep.- let (ba, width, depth) = (PI, 2.0, 1.0);- for (converted, position, setback) in [(false, "inside", 3.0), (false, "outside", 0.0), (true, "inside", 3.0)] {- let what = format!("converted {converted}, {position}");- let mut s = Session::default();- bar_with_leg(&mut s, converted);- // Where the sheet's bottom face lies.- let z0 = bbox(&mut s)["min"][2].as_f64().unwrap_or(f64::NAN);- // A 90° flange 15 high on the bar's top edge (x 20…160); the leg stands past its left end.- run(&mut s, "sheet.flange", json!({"edges": [[90, 30, z0 + 2.0]], "height": 15, "angle": 90, "position": position}));- assert!(no_errors_or_warnings(&s), "{what}: {:?}", s.model.results);- // By hand: the base loses the setback under that edge alone, and the relief beside the- // bend's end at x = 20, from `depth` before the bend line to `width` past the flange's- // far edge in the flat (BA and the 12 mm panel past the line).- let (line, panel) = (30.0 - setback, 12.0);- let relief = width * (depth + ba + panel + width);- let base = 160.0 * 30.0 + 20.0 * 30.0 - 140.0 * setback - relief;- let want = 2.0 * (base + 140.0 * (ba + panel));- assert!(rel(volume(&mut s), want) < 1e-5, "{what}: {} vs {want}", volume(&mut s));- assert!(contains(&s, [10.0, 50.0, z0 + 1.0]), "{what}: the leg is kept");- assert!(!contains(&s, [19.0, line + 0.5, z0 + 1.0]), "{what}: the relief is cut");- assert!(contains(&s, [17.0, line + 0.5, z0 + 1.0]), "{what}: the leg beside the relief stays");- assert!(contains(&s, [19.0, 50.0, z0 + 1.0]), "{what}: the leg past the relief's end stays");- // The flange's mid plane is R + T/2 = 2 past the bend line; it ends at the leg.- assert!(contains(&s, [90.0, line + 2.0, z0 + 10.0]), "{what}: the flange stands");- assert!(!contains(&s, [10.0, line + 2.0, z0 + 10.0]), "{what}: the flange ends at the leg");- let f = flat(&mut s);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{what}: {f}");- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(0), "{what}: {f}");- assert!((f["bends"][0]["length"].as_f64().unwrap_or(f64::NAN) - 140.0).abs() < 1e-9, "{what}: {f}");- run(&mut s, "sheet.unfold", json!({}));- assert!(rel(volume(&mut s), want) < 1e-9, "{what}: flat {} vs {want}", volume(&mut s));- }-}--/// A bend relief the rule makes too narrow to cut is left out, and the flange says where.-#[test]-fn a_bend_relief_left_out_is_reported_on_the_flange() {- let mut s = Session::default();- bar_with_leg(&mut s, false);- run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "relief_width": "0 mm"}));- run(&mut s, "sheet.flange", json!({"edges": [[90, 30, 2]], "height": 15, "angle": 90}));- let w = s.model.results.last().and_then(|r| r.warning.clone()).unwrap_or_default();- assert!(w.contains("no bend relief at (20.000, 27.000, 0.000)") && w.contains("relief width"), "{w}");- assert!(contains(&s, [10.0, 50.0, 1.0]), "the leg is kept");-}--/// `fixed` inside a cut-out touches no material: the fold must refuse it or say which side it kept (#263).-#[test]-fn fold_fixed_point_off_the_sheet_is_not_silently_ignored() {- let mut s = Session::default();- outline_blank(&mut s, json!([[0, 0], [100, 0], [100, 60], [0, 60]]));- run(&mut s, "sketch.create", json!({"plane": "XY", "offset": "2", "name": "Window"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [10, 15], "p1": [40, 45]}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Window", "distance": "4", "direction": "negative", "operation": "cut"}));- match s.execute("sheet.fold", &json!({"points": [[80, 0, 0.8], [80, 60, 0.8]], "fixed": [25, 30, 0.8]})) {- Err(e) => assert!(e.to_string().contains("fixed"), "{e}"),- Ok(r) => {- let warned =- ["warning", "warnings"].iter().any(|k| r.get(*k).is_some_and(|w| !w.is_null() && w != &json!([]) && w.to_string().contains("fixed")));- assert!(warned, "fixed [25, 30] is inside the window, yet the fold succeeded silently: {r}");- }- }-}--/// A tab whose fold line sits exactly at its root: the bend zone reaches the blank outline beside-/// the tab. Every edge is straight, so the error must not blame a slanted or curved edge (#262).-#[test]-fn fold_at_a_tab_root_names_the_real_cause() {- let mut s = Session::default();- outline_blank(&mut s, json!([[0, 0], [100, 0], [100, 50], [60, 50], [60, 70], [40, 70], [40, 50], [0, 50]]));- if let Err(e) = s.execute("sheet.fold", &json!({"points": [[40, 50, 0.8], [60, 50, 0.8]], "fixed": [50, 25, 0.8]})) {- let e = e.to_string();- assert!(!e.contains("slanted or curved"), "all edges are straight: {e}");- assert!(e.contains("bend zone"), "name the bend zone reaching the outline: {e}");- }- // 1 mm into the tab the same fold works.- let mut ok = Session::default();- outline_blank(&mut ok, json!([[0, 0], [100, 0], [100, 50], [60, 50], [60, 70], [40, 70], [40, 50], [0, 50]]));- run(&mut ok, "sheet.fold", json!({"points": [[40, 51, 0.8], [60, 51, 0.8]], "fixed": [50, 25, 0.8]}));-}--/// #296: two bends meeting at an open corner relief touch only along an edge, so the folded-/// material the machining guard checks must not be sewn into one solid.-#[test]-fn hole_beside_two_adjacent_edge_flanges_cuts_and_bends_stay_guarded() {- let build = |s: &mut Session| {- base(s, 80.0, 40.0);- run(s, "sheet.flange", json!({"edges":[[40.0, 0.0, 2.5]],"height":30,"angle":90}));- run(s, "sheet.flange", json!({"edges":[[80.0, 22.5, 2.5]],"height":15,"angle":90}));- };- let hole = |s: &mut Session, name: &str, centre: [f64; 2]| {- run(s, "sketch.create", json!({"plane":"XY","name":name}));- run(s, "sketch.circle.center", json!({"center":centre,"radius":3}));- run(s, "sketch.finish", json!({}));- s.execute("solid.extrude", &json!({"sketch":name,"through_all":true,"operation":"cut"}))- };- let mut s = Session::default();- build(&mut s);- let before = volume(&mut s);- assert!((before - 14057.2).abs() < 0.1, "{before}");- if let Err(e) = hole(&mut s, "Hole", [25.0, 20.0]) {- panic!("hole beside two flanges: {e}");- }- let after = volume(&mut s);- assert!((before - after - 9.0 * PI * 2.5).abs() < 0.05, "{before} -> {after}");- let mut bend = Session::default();- build(&mut bend);- let error = hole(&mut bend, "Bend", [78.5, 20.0]).unwrap_err().to_string();- assert!(error.contains("bend"), "{error}");-}--/// The guard of #296 sews every bend on its own. A bend that carries a folded round cut-out-/// (curved edges on both of its cylinders, a ruled wall between them) sews like any other: a hole-/// beside it cuts, and a hole in the bend is still refused.-#[test]-fn hole_beside_a_bend_with_a_round_cut_out_cuts_and_the_bend_stays_guarded() {- let build = |s: &mut Session| {- base(s, 80.0, 40.0);- run(s, "sheet.flange", json!({"edges":[[40.0, 0.0, 2.5]],"height":30,"angle":90}));- run(s, "sheet.unfold", json!({}));- run(s, "sketch.create", json!({"plane":"XY","name":"Across"}));- run(s, "sketch.circle.center", json!({"center":[60.0, 0.0],"radius":4}));- run(s, "sketch.finish", json!({}));- run(s, "solid.extrude", json!({"sketch":"Across","through_all":true,"operation":"cut","direction":"symmetric"}));- run(s, "sheet.refold", json!({}));- };- let hole = |s: &mut Session, name: &str, centre: [f64; 2]| {- run(s, "sketch.create", json!({"plane":"XY","name":name}));- run(s, "sketch.circle.center", json!({"center":centre,"radius":3}));- run(s, "sketch.finish", json!({}));- s.execute("solid.extrude", &json!({"sketch":name,"through_all":true,"operation":"cut"}))- };- let mut s = Session::default();- build(&mut s);- let before = volume(&mut s);- if let Err(e) = hole(&mut s, "Hole", [25.0, 20.0]) {- panic!("hole beside a bend with a round cut-out: {e}");- }- let after = volume(&mut s);- assert!((before - after - 9.0 * PI * 2.5).abs() < 0.05, "{before} -> {after}");- let mut bend = Session::default();- build(&mut bend);- let error = hole(&mut bend, "Bend", [25.0, 1.5]).unwrap_err().to_string();- assert!(error.contains("bend"), "{error}");-}--/// Whether the flat pattern has a cut-out whose points all lie on the circle of radius `r` about `c`.-fn has_round_cutout(f: &Value, c: [f64; 2], r: f64) -> bool {- f["cutouts"].as_array().into_iter().flatten().any(|cut| {- let on_circle = |p: &Value| ((p[0].as_f64().unwrap_or(f64::NAN) - c[0]).hypot(p[1].as_f64().unwrap_or(f64::NAN) - c[1]) - r).abs() < 1e-3;- cut.as_array().is_some_and(|points| !points.is_empty() && points.iter().all(on_circle))- })-}--/// Whether the flat DXF holds the circle of radius `r` about `c` as a `CIRCLE`.-fn dxf_has_circle(s: &mut Session, c: [f64; 2], r: f64) -> bool {- let dxf = run(s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- let centre = solidcraft_geom::Vec2::new(c[0], c[1]);- solidcraft_io::read_dxf(&dxf)- .unwrap_or_default()- .iter()- .any(|g| matches!(g, solidcraft_io::Geom2::Circle(at, radius) if at.dist(centre) < 1e-5 && (radius - r).abs() < 1e-5))-}--/// A hole on a flange lands in the flat pattern where the bend allowance puts its panel.-#[test]-fn a_hole_on_a_flange_panel_unfolds_with_the_flange() {- // The flange's panel begins 5 mm (R + T) above the base's underside, and at y = 5 − BA in- // the flat pattern: a hole 7 mm up the panel is at y = 5 − BA − 7 there, one 10 mm up at- // y = 5 − BA − 10.- let ba = FRAC_PI_2 * (2.5 + 0.44 * 2.5);- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- // Ø4 from the flange's inner face (y = 2.5), Ø3 from its outer face (y = 0), Ø6 on the base.- run(&mut s, "solid.hole", json!({"position": [30, 2.5, 12], "diameter": 4}));- run(&mut s, "solid.hole", json!({"position": [70, 0, 15], "diameter": 3}));- run(&mut s, "solid.hole", json!({"position": [50, 30, 2.5], "diameter": 6}));- let removed = PI * 2.5 * (4.0 + 2.25 + 9.0);- assert!((v0 - volume(&mut s) - removed).abs() < 0.05, "{}", v0 - volume(&mut s));- assert!(!contains(&s, [30.0, 1.25, 12.0]) && contains(&s, [33.0, 1.25, 12.0]));- assert!(!contains(&s, [70.0, 1.25, 15.0]) && !contains(&s, [50.0, 30.0, 1.25]));- let holes = [([30.0, 5.0 - ba - 7.0], 2.0), ([70.0, 5.0 - ba - 10.0], 1.5), ([50.0, 30.0], 3.0)];- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(3));- for (centre, radius) in holes {- assert!(has_round_cutout(&f, centre, radius), "{centre:?}: {}", f["cutouts"]);- assert!(dxf_has_circle(&mut s, centre, radius), "{centre:?}");- }- // Unfolded, the sheet is its flat pattern 2.5 thick: (55 + BA + 15) x 100, less the holes.- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - ((70.0 + ba) * 250.0 - removed)).abs() < 0.05, "{}", volume(&mut s));- run(&mut s, "sheet.refold", json!({}));- assert!((v0 - volume(&mut s) - removed).abs() < 0.05, "{}", v0 - volume(&mut s));- // A hole made on the unfolded sheet where the flange lies is on the flange once refolded.- let mut flat_first = Session::default();- plate_with_flange(&mut flat_first);- run(&mut flat_first, "sheet.unfold", json!({}));- run(&mut flat_first, "solid.hole", json!({"position": [30, 5.0 - ba - 7.0, 2.5], "diameter": 4}));- run(&mut flat_first, "sheet.refold", json!({}));- assert!((v0 - volume(&mut flat_first) - PI * 4.0 * 2.5).abs() < 0.05, "{}", v0 - volume(&mut flat_first));- assert!(!contains(&flat_first, [30.0, 1.25, 12.0]) && contains(&flat_first, [33.0, 1.25, 12.0]));-}--/// On a folded sheet a counterbore is the same pocket around the same hole, on the base and on a-/// flange, and stays through unfold and refold.-#[test]-fn a_counterbore_on_a_folded_sheet_is_a_pocket_around_its_cut_out() {- let ba = FRAC_PI_2 * (2.5 + 0.44 * 2.5);- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- // Ø4 with Ø8 x 1 on the base: 22π mm³. Ø3 with Ø6 x 1 from the flange's inner face, 7 mm up- // its panel: π · (1.5² · 2.5 + (3² − 1.5²) · 1) = 12.375π mm³.- run(&mut s, "solid.hole", json!({"position": [80, 40, 2.5], "diameter": 4, "type": "counterbore", "cb_diameter": 8, "cb_depth": 1}));- run(&mut s, "solid.hole", json!({"position": [30, 2.5, 12], "diameter": 3, "type": "counterbore", "cb_diameter": 6, "cb_depth": 1}));- let removed = (22.0 + 12.375) * PI;- assert!((v0 - volume(&mut s) - removed).abs() < 0.05, "{}", v0 - volume(&mut s));- assert!(!contains(&s, [83.0, 40.0, 2.0]) && contains(&s, [83.0, 40.0, 1.0]) && !contains(&s, [80.0, 40.0, 1.0]));- // The flange's pocket is in its inner face (y from 1.5 to 2.5), around the hole.- assert!(!contains(&s, [32.0, 2.0, 12.0]) && contains(&s, [32.0, 1.0, 12.0]) && !contains(&s, [30.0, 1.0, 12.0]));- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(2));- assert!(has_round_cutout(&f, [80.0, 40.0], 2.0) && has_round_cutout(&f, [30.0, 5.0 - ba - 7.0], 1.5), "{}", f["cutouts"]);- assert_eq!(f["pockets"].as_array().map(Vec::len), Some(2));- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - ((70.0 + ba) * 250.0 - removed)).abs() < 0.05, "{}", volume(&mut s));- run(&mut s, "sheet.refold", json!({}));- assert!((v0 - volume(&mut s) - removed).abs() < 0.05, "{}", v0 - volume(&mut s));-}--/// The pocket's tool spans a cut-out inside it: extrude cuts of a pocket and of a hole in its-/// floor, in either order, rebuild on the base of a folded sheet, where the pocket's own wall-/// along the hole's used to make the cut fail.-#[test]-fn a_pocket_around_a_cut_out_rebuilds_on_a_folded_sheet() {- for pocket_first in [true, false] {- let mut s = Session::default();- plate_with_flange(&mut s);- let v0 = volume(&mut s);- let cuts = [("Pocket", 6.0, 1.0), ("Bore", 3.0, 2.5)];- for (name, diameter, depth) in if pocket_first { cuts } else { [cuts[1], cuts[0]] } {- circle_sketch(&mut s, name, json!({"face": [50, 30, 2.5]}), [40.0, 30.0], diameter);- run(&mut s, "solid.extrude", json!({"sketch": name, "distance": depth, "direction": "negative", "operation": "cut"}));- }- // π · (1.5² · 2.5 + (3² − 1.5²) · 1) = 12.375π mm³.- assert!((v0 - volume(&mut s) - 12.375 * PI).abs() < 0.05, "{pocket_first}: {}", v0 - volume(&mut s));- let f = flat(&mut s);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1));- assert_eq!(f["pockets"].as_array().map(Vec::len), Some(1));- for command in ["sheet.unfold", "sheet.refold"] {- run(&mut s, command, json!({}));- }- assert!((v0 - volume(&mut s) - 12.375 * PI).abs() < 0.05, "{pocket_first}: {}", v0 - volume(&mut s));- }-}--/// A fold whose stored `fixed` point ends up off the sheet after a parameter change keeps working:-/// the point still says which side stays (#370). Only a new pick off the sheet is refused (#263).-#[test]-fn fold_keeps_working_when_a_parameter_moves_the_sheet_off_its_fixed_point() {- let mut s = Session::default();- run(&mut s, "parameters.change", json!({"name": "w", "expression": "100 mm"}));- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Blank"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.dimension", json!({"entities": ["l1"], "value": "w"}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Blank"}));- run(&mut s, "sheet.fold", json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": [90, 30, 2.5], "name": "Fold1"}));- run(&mut s, "parameters.change", json!({"name": "w", "expression": "80 mm"}));- let fold = run(&mut s, "timeline.inspect", json!({"feature": "Fold1"}));- assert!(fold["error"].is_null(), "the fold fails after the width change: {}", fold["error"]);- // The +x side (where the point is) stays flat out to the new width; the -x side stands up.- let bb = &run(&mut s, "inspect.measure", json!({}))["bodies"][0]["bbox"];- assert!((bb["max"][0].as_f64().unwrap_or(0.0) - 80.0).abs() < 1e-6, "{bb}");- assert!(bb["max"][2].as_f64().unwrap_or(0.0) > 30.0, "{bb}");-}--/// `fixed` 20 mm above a 2.5 mm sheet touches no material: refuse it or say so, like a point in a-/// cut-out (#371).-#[test]-fn fold_fixed_point_above_the_sheet_is_not_silently_accepted() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- match s.execute("sheet.fold", &json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": [90, 30, 20]})) {- Err(e) => assert!(e.to_string().contains("fixed"), "{e}"),- Ok(r) => {- let warned = ["warning", "warnings"].iter().any(|k| r.get(*k).is_some_and(|w| w.to_string().contains("fixed")));- assert!(warned, "fixed [90, 30, 20] is 17.5 mm above the sheet, yet the fold succeeded silently: {r}");- }- }-}--/// A 120 x 90 tray in 2 mm aluminium (R 1, K 0.5): four 38.6 mm flanges at `deg` in one feature.-fn alu_tray(s: &mut Session, deg: f64, rule: Value) {- let mut r = json!({"name": "AL2", "thickness": "2 mm", "k_factor": 0.5, "bend_radius": "1 mm", "gap": "0.5 mm", "active": true});- if let (Some(r), Some(extra)) = (r.as_object_mut(), rule.as_object()) {- r.extend(extra.clone());- }- run(s, "sheet.manage_rules", r);- base(s, 120.0, 90.0);- run(s, "sheet.flange", json!({"edges": [[60, 0, 2], [120, 45, 2], [60, 90, 2], [0, 45, 2]], "height": 38.6, "angle": format!("{deg} deg")}));-}--#[test]-fn closed_corners_reach_the_flat_pattern_and_the_dxf() {- use std::f64::consts::SQRT_2;- // 60° and 105° are angles whose flat pattern was lost to a rounding slip in the planar arrangement.- for deg in [60.0f64, 72.0, 90.0, 105.0] {- let mut s = Session::default();- alu_tray(&mut s, deg, json!({}));- assert!(s.model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{deg}: {:?}", s.model.results);- // The end of the flange on y = 0 at the corner at the origin, by hand (see the doc tests):- // x(w) = g/√2 + T·sinθ − w·cosθ at flat y = s0 − BA − (w − s0), for w = s0 and w = 38.6.- let th = deg.to_radians();- let (s0, ba) = (3.0 * (th / 2.0).tan(), th * 2.0);- let x_end = |w: f64| 0.5 / SQRT_2 + 2.0 * th.sin() - w * th.cos();- let f = flat(&mut s);- let outline: Vec<(f64, f64)> = f["outline"][0]- .as_array()- .map(|l| l.iter().map(|p| (p[0].as_f64().unwrap_or(f64::NAN), p[1].as_f64().unwrap_or(f64::NAN))).collect())- .unwrap_or_default();- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{deg}: {f}");- for (x, y) in [(x_end(s0), s0 - ba), (x_end(38.6), s0 - ba - (38.6 - s0))] {- assert!(outline.iter().any(|p| (p.0 - x).abs() < 1e-6 && (p.1 - y).abs() < 1e-6), "{deg}: ({x}, {y}) not in {outline:?}");- }- // The folded part holds the flat pattern's material (K = 0.5 keeps the volume).- let n = outline.len();- let area = (0..n).map(|i| outline[i].0 * outline[(i + 1) % n].1 - outline[(i + 1) % n].0 * outline[i].1).sum::<f64>().abs() / 2.0;- let v = volume(&mut s);- assert!((v - area * 2.0).abs() < 1e-3 * v, "{deg}: {v} vs {}", area * 2.0);- // The DXF: the closed outline in straight lines, four bend lines.- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert_eq!(dxf.matches("0\nLINE\n").count(), n + 4, "{deg}: {n} outline points");- // Unfold and refold keep it.- run(&mut s, "sheet.unfold", json!({}));- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - v).abs() < 1e-6 * v, "{deg}");- // A cut made folded still goes through with the corners closed: a Ø20 hole in the base.- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- run(&mut s, "sketch.circle.center", json!({"center": [60, 45], "diameter": 20}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Hole", "distance": 10, "operation": "cut", "through_all": true}));- let want = PI * 100.0 * 2.0;- assert!((v - volume(&mut s) - want).abs() < 1e-3 * want, "{deg}: {v} - {} vs {want}", volume(&mut s));- assert_eq!(flat(&mut s)["cutouts"].as_array().map(Vec::len), Some(1), "{deg}");- }-}--#[test]-fn corner_reliefs_of_the_rule_reach_the_part_the_flat_pattern_and_the_dxf() {- use solidcraft_geom::Vec2;- // The tray at 72°: its bends meet at the corners of the base, s0 = 3·tan 36° in from the sheet's- // edges, and are BA = 2θ wide in the flat. A relief 8 mm across reaches r = 4 mm along both edges- // and takes, at each corner, r²·π/4 (round) or r² (rectangular) of the base and r of two bends.- let th = 72f64.to_radians();- let (s0, ba) = (3.0 * (th / 2.0).tan(), th * 2.0);- let corners = [(s0, s0), (120.0 - s0, s0), (120.0 - s0, 90.0 - s0), (s0, 90.0 - s0)];- let export = |s: &mut Session| run(s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- let mut notch = Session::default();- alu_tray(&mut notch, 72.0, json!({"corner_relief": "8 mm"}));- let v0 = volume(&mut notch);- assert_eq!(export(&mut notch).matches("0\nARC\n").count(), 0);- run(&mut notch, "sheet.unfold", json!({}));- let flat0 = volume(&mut notch);- for (shape, of_the_base) in [("round", 4.0 * PI), ("rectangular", 16.0)] {- let mut s = Session::default();- alu_tray(&mut s, 72.0, json!({"corner_relief_shape": shape, "corner_relief": "8 mm"}));- assert!(s.model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{shape}: {:?}", s.model.results);- let listed = run(&mut s, "sheet.rules", json!({}));- assert_eq!(listed["rules"][0]["rule"]["corner_relief_shape"], shape);- assert_eq!(listed["rules"][0]["values"]["corner_relief_shape"], shape);- // The folded part loses what the flat pattern loses (K = 0.5 keeps the volume of a bend).- let (v, want) = (volume(&mut s), 4.0 * (of_the_base + 8.0 * ba) * 2.0);- assert!((v0 - v - want).abs() < 0.1, "{shape}: {v0} - {v} vs {want}");- // The bend table: every bend is 8 mm shorter.- let f = flat(&mut s);- let lengths: Vec<f64> =- f["bends"].as_array().map(|b| b.iter().map(|b| b["length"].as_f64().unwrap_or(f64::NAN)).collect()).unwrap_or_default();- for (got, edge) in lengths.iter().zip([120.0, 90.0, 120.0, 90.0]) {- assert!(lengths.len() == 4 && (got - (edge - 2.0 * s0 - 8.0)).abs() < 1e-6, "{shape}: {lengths:?}");- }- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{shape}");- // The DXF: the round reliefs are arcs of radius 4 about the four corners, the square ones lines.- let dxf = export(&mut s);- let arcs: Vec<(Vec2, f64)> = solidcraft_io::read_dxf(&dxf)- .unwrap_or_default()- .iter()- .filter_map(|g| if let solidcraft_io::Geom2::Arc { c, a, .. } = g { Some((*c, a.dist(*c))) } else { None })- .collect();- if shape == "round" {- assert_eq!(arcs.len(), 4, "{arcs:?}");- for (x, y) in corners {- assert!(arcs.iter().any(|(c, r)| c.dist(Vec2::new(x, y)) < 1e-6 && (r - 4.0).abs() < 1e-6), "({x}, {y}): {arcs:?}");- }- } else {- assert!(arcs.is_empty() && dxf.contains(&format!("{:.6}\n20\n{:.6}\n", s0 + 4.0, s0 + 4.0)), "{arcs:?}");- }- // Unfold and refold keep it, and a cut made folded still goes through: a Ø20 hole in the base.- run(&mut s, "sheet.unfold", json!({}));- assert!((flat0 - volume(&mut s) - want).abs() < 0.1, "{shape}: unfolded {flat0} - {} vs {want}", volume(&mut s));- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - v).abs() < 1e-6 * v, "{shape}");- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- run(&mut s, "sketch.circle.center", json!({"center": [60, 45], "diameter": 20}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Hole", "distance": 10, "operation": "cut", "through_all": true}));- assert!((v - volume(&mut s) - PI * 100.0 * 2.0).abs() < 0.5, "{shape}: {v} - {}", volume(&mut s));- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((volume(&mut reopened) - volume(&mut s)).abs() < 1e-6, "{shape}");- }-}--#[test]-fn a_tear_of_the_rule_reaches_the_part_the_flat_pattern_and_the_dxf() {- use std::f64::consts::SQRT_2;- // The tray at 90° and 72° (see the doc tests): its bends meet at (s0, s0), s0 = 3·tan(θ/2), and- // are BA = 2θ wide in the flat. The flange on y = 0 is closed to x_end(w) = g/√2 + T·sinθ − w·cosθ.- // Torn, its bend's end is cut from (s0, s0) straight to (x_end(s0), s0 − BA), where the flange's- // end starts: grow = s0 − x_end(s0) = sinθ − 0.5/√2 past the corner, instead of square across the- // bend and back along the flange's edge (the notch's step).- for deg in [90.0f64, 72.0] {- let th = deg.to_radians();- let (s0, ba) = (3.0 * (th / 2.0).tan(), th * 2.0);- let x_end = |w: f64| 0.5 / SQRT_2 + 2.0 * th.sin() - w * th.cos();- let grow = s0 - x_end(s0);- assert!((grow - (th.sin() - 0.5 / SQRT_2)).abs() < 1e-12);- let points = |f: &Value| -> Vec<(f64, f64)> {- let line = f["outline"][0].as_array();- line.map(|l| l.iter().map(|p| (p[0].as_f64().unwrap_or(f64::NAN), p[1].as_f64().unwrap_or(f64::NAN))).collect()).unwrap_or_default()- };- let mut notch = Session::default();- alu_tray(&mut notch, deg, json!({}));- let (v0, stepped) = (volume(&mut notch), points(&flat(&mut notch)));- run(&mut notch, "sheet.unfold", json!({}));- let flat0 = volume(&mut notch);- let mut s = Session::default();- alu_tray(&mut s, deg, json!({"corner_relief_shape": "tear"}));- assert!(s.model.results.iter().all(|r| r.error.is_none() && r.warning.is_none()), "{deg}: {:?}", s.model.results);- let listed = run(&mut s, "sheet.rules", json!({}));- assert_eq!(listed["rules"][0]["rule"]["corner_relief_shape"], "tear");- assert_eq!(listed["rules"][0]["values"]["corner_relief_shape"], "tear");- // The flat pattern, at the corner at the origin: the flange's end, the cut, the corner of the- // bends, and the same on the flange on x = 0. The step is gone: a corner less at each of the- // eight bend ends.- let f = flat(&mut s);- let outline = points(&f);- let at = |pts: &[(f64, f64)], x: f64, y: f64| pts.iter().any(|p| (p.0 - x).abs() < 1e-6 && (p.1 - y).abs() < 1e-6);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{deg}: {f}");- for (x, y) in [(x_end(38.6), s0 - ba - (38.6 - s0)), (x_end(s0), s0 - ba), (s0, s0)] {- assert!(at(&outline, x, y) && at(&outline, y, x), "{deg}: ({x}, {y}) not in {outline:?}");- }- assert!(at(&stepped, s0, s0 - ba) && !at(&outline, s0, s0 - ba) && !at(&outline, s0 - ba, s0), "{deg}");- assert_eq!(outline.len() + 8, stepped.len(), "{deg}");- // The bend table: every centre line runs between the middles of its bend's two ends.- let lengths: Vec<f64> =- f["bends"].as_array().map(|b| b.iter().map(|b| b["length"].as_f64().unwrap_or(f64::NAN)).collect()).unwrap_or_default();- for (got, edge) in lengths.iter().zip([120.0, 90.0, 120.0, 90.0]) {- assert!(lengths.len() == 4 && (got - (edge - 2.0 * s0 + grow)).abs() < 1e-6, "{deg}: {lengths:?}");- }- // The folded part gains what the flat pattern gains: the triangle BA·grow/2 at each of the- // eight bend ends (K = 0.5 keeps the volume of a bend).- let (v, want) = (volume(&mut s), 8.0 * ba * grow / 2.0 * 2.0);- assert!((v - v0 - want).abs() < 0.05, "{deg}: {v} - {v0} vs {want}");- // The DXF: the outline in straight lines, each cut one of them, and four bend lines.- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert_eq!(dxf.matches("0\nLINE\n").count(), outline.len() + 4, "{deg}");- assert!(dxf.contains(&format!("{:.6}\n20\n{:.6}\n", x_end(s0), s0 - ba)), "{deg}");- // Unfold and refold keep it, and a cut made folded still goes through: a Ø20 hole in the base.- run(&mut s, "sheet.unfold", json!({}));- assert!((volume(&mut s) - flat0 - want).abs() < 1e-6, "{deg}: unfolded {} - {flat0} vs {want}", volume(&mut s));- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - v).abs() < 1e-6 * v, "{deg}");- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- run(&mut s, "sketch.circle.center", json!({"center": [60, 45], "diameter": 20}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Hole", "distance": 10, "operation": "cut", "through_all": true}));- assert!((v - volume(&mut s) - PI * 100.0 * 2.0).abs() < 0.5, "{deg}: {v} - {}", volume(&mut s));- let mut reopened = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!((volume(&mut reopened) - volume(&mut s)).abs() < 1e-6, "{deg}");- }-}--#[test]-fn the_corner_relief_shape_is_a_rule_setting_checked_and_undone() {- let mut s = Session::default();- alu_tray(&mut s, 72.0, json!({}));- let shape = |s: &mut Session| run(s, "sheet.rules", json!({}))["rules"][0]["rule"]["corner_relief_shape"].clone();- let v0 = volume(&mut s);- assert_eq!(shape(&mut s), "notch");- // Only the four names are shapes; a refused one changes nothing.- for wrong in [json!("star"), json!("square"), json!(""), json!(2)] {- let e = s.execute("sheet.manage_rules", &json!({"name": "AL2", "corner_relief_shape": wrong})).map(|_| ()).unwrap_err().to_string();- assert!(e.contains("`corner_relief_shape` must be notch, round, rectangular or tear"), "{e}");- }- assert!(shape(&mut s) == "notch" && volume(&mut s) == v0);- // Changing the rule changes the parts made with it; other settings leave the shape alone.- let r = run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "corner_relief_shape": "Round"}));- assert_eq!((&r["rule"]["corner_relief_shape"], &r["values"]["corner_relief_shape"]), (&json!("round"), &json!("round")));- let round = volume(&mut s);- assert!(round < v0 - 200.0, "{v0} -> {round}");- run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "hem_gap": "0.02 mm"}));- assert!(shape(&mut s) == "round" && volume(&mut s) == round);- run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "corner_relief_shape": null, "corner_relief": "6 mm"}));- assert!(shape(&mut s) == "round" && volume(&mut s) > round);- for _ in 0..3 {- run(&mut s, "edit.undo", json!({}));- }- assert!(shape(&mut s) == "notch" && volume(&mut s) == v0);- // A relief longer than the bends is left out and reported on the flange; the part is the notched one.- run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "corner_relief_shape": "rectangular", "corner_relief": "200 mm"}));- let w = s.model.results.last().and_then(|r| r.warning.clone()).unwrap_or_default();- assert_eq!(w.matches("no corner relief at (").count(), 4, "{w}");- assert!(w.contains("would take a whole bend away") && volume(&mut s) == v0, "{w}");-}--#[test]-fn corners_left_open_are_reported_on_the_flange() {- let mut s = Session::default();- alu_tray(&mut s, 72.0, json!({"gap": "0 mm"}));- let w = s.model.results.last().and_then(|r| r.warning.clone()).unwrap_or_default();- assert_eq!(w.matches("left open").count(), 4, "{w}");- // Open corners still fold, unfold and take cuts.- run(&mut s, "sheet.unfold", json!({}));- run(&mut s, "sheet.refold", json!({}));- assert!(volume(&mut s) > 0.0);-}--/// 2 mm aluminium (R 1, K 0.5, gap 0.5) and a 120 x 90 base flange.-fn alu_base(s: &mut Session) {- run(- s,- "sheet.manage_rules",- json!({"name": "AL2", "thickness": "2 mm", "k_factor": 0.5, "bend_radius": "1 mm", "gap": "0.5 mm", "active": true}),- );- base(s, 120.0, 90.0);-}--/// The base's four edges (bottom, right, top, left) in one feature: 75° and 38.6 high from the-/// feature, then 90°, 105° at 30 high and 120° at 25 high from the edges themselves.-fn four_angles_in_one_feature() -> Session {- let mut s = Session::default();- alu_base(&mut s);- let edges = json!([- [60, 0, 2],- {"point": [120, 45, 2], "angle": "90 deg"},- {"point": [60, 90, 2], "angle": 105, "height": "30 mm"},- {"point": {"x": 0, "y": 45, "z": 2}, "angle": "120 deg", "height": 25}- ]);- run(&mut s, "sheet.flange", json!({"edges": edges, "height": 38.6, "angle": "75 deg"}));- s-}--/// The flat outline's points.-fn outline_points(f: &Value) -> Vec<(f64, f64)> {- let loops = f["outline"].as_array().cloned().unwrap_or_default();- loops- .iter()- .flat_map(|l| l.as_array().cloned().unwrap_or_default())- .map(|q| (q[0].as_f64().unwrap_or(f64::NAN), q[1].as_f64().unwrap_or(f64::NAN)))- .collect()-}--/// Two point lists are the same set of points, to 1e-6.-fn same_points(a: &[(f64, f64)], b: &[(f64, f64)]) -> bool {- a.len() == b.len() && a.iter().all(|p| b.iter().any(|q| (p.0 - q.0).abs() < 1e-6 && (p.1 - q.1).abs() < 1e-6))-}--fn bend_angles(s: &mut Session) -> Vec<f64> {- flat(s)["bends"].as_array().cloned().unwrap_or_default().iter().map(|b| b["angle_deg"].as_f64().unwrap_or(f64::NAN).round()).collect()-}--fn no_errors_or_warnings(s: &Session) -> bool {- s.model.results.iter().all(|r| r.error.is_none() && r.warning.is_none())-}--/// The flanges of [`four_angles_in_one_feature`] (bottom, right, top, left): angles in degrees-/// and heights.-const FOUR_ANGLES: [f64; 4] = [75.0, 90.0, 105.0, 120.0];-const FOUR_HEIGHTS: [f64; 4] = [38.6, 38.6, 30.0, 25.0];--/// That tray's panels in the flat pattern by hand (T 2, R 1, K 0.5, gap g 0.5; the derivation-/// is with the doc tests). Folded, a flange at θ whose neighbour at a corner is at φ ends-/// x(w) = ((g/2)·√(2 − 2·cosθ·cosφ) + T·(1 − cosθ·cosφ) − w·sinθ·cosφ) / sinφ along its edge from-/// that corner, w up its outer face from the virtual sharp. In the flat that point lies-/// s0 − BA − (w − s0) into the base from the edge, with s0 = (R + T)·tan(θ/2) the setback and-/// BA = θ·(R + K·T) the bend allowance; the panel spans w = s0 … the flange's height.-fn hand_panels() -> Vec<Vec<(f64, f64)>> {- // Each edge's start corner, its direction, the direction into the base, and its length.- let frames: [((f64, f64), (f64, f64), (f64, f64), f64); 4] = [- ((0.0, 0.0), (1.0, 0.0), (0.0, 1.0), 120.0),- ((120.0, 0.0), (0.0, 1.0), (-1.0, 0.0), 90.0),- ((120.0, 90.0), (-1.0, 0.0), (0.0, -1.0), 120.0),- ((0.0, 90.0), (0.0, -1.0), (1.0, 0.0), 90.0),- ];- (0..4)- .map(|i| {- let (o, d, v, len) = frames[i];- let (th, h) = (FOUR_ANGLES[i].to_radians(), FOUR_HEIGHTS[i]);- let (s0, ba) = (3.0 * (th / 2.0).tan(), th * 2.0);- let x_end = |phi: f64, w: f64| {- let c = th.cos() * phi.cos();- (0.25 * (2.0 - 2.0 * c).sqrt() + 2.0 * (1.0 - c) - w * th.sin() * phi.cos()) / phi.sin()- };- let (prev, next) = (FOUR_ANGLES[(i + 3) % 4].to_radians(), FOUR_ANGLES[(i + 1) % 4].to_radians());- let at = |u: f64, w: f64| {- let into = s0 - ba - (w - s0);- (o.0 + d.0 * u + v.0 * into, o.1 + d.1 * u + v.1 * into)- };- vec![at(x_end(prev, s0), s0), at(x_end(prev, h), h), at(len - x_end(next, h), h), at(len - x_end(next, s0), s0)]- })- .collect()-}--/// A polygon's area.-fn polygon_area(p: &[(f64, f64)]) -> f64 {- let n = p.len();- (0..n).map(|i| p[i].0 * p[(i + 1) % n].1 - p[(i + 1) % n].0 * p[i].1).sum::<f64>().abs() / 2.0-}--#[test]-fn edge_flanges_take_their_own_angle_and_height_per_edge() {- let mut one = four_angles_in_one_feature();- assert!(no_errors_or_warnings(&one), "{:?}", one.model.results);- let f1 = flat(&mut one);- // The bends: each edge's own angle, as long as the base's edge between its neighbours' bend- // start lines (each s0 in from the original edge).- assert_eq!(bend_angles(&mut one), FOUR_ANGLES);- let s0 = FOUR_ANGLES.map(|a| 3.0 * (a.to_radians() / 2.0).tan());- let ba = FOUR_ANGLES.map(|a| a.to_radians() * 2.0);- let (w, h) = (120.0 - s0[3] - s0[1], 90.0 - s0[0] - s0[2]);- let lengths: Vec<f64> = f1["bends"].as_array().cloned().unwrap_or_default().iter().map(|b| b["length"].as_f64().unwrap_or(f64::NAN)).collect();- assert_eq!(lengths.len(), 4, "{f1}");- for (got, want) in lengths.iter().zip([w, h, w, h]) {- assert!((got - want).abs() < 1e-6, "{lengths:?} vs {w} and {h}");- }- // The flat pattern is one outline through every hand-derived panel corner.- let (outline, panels) = (outline_points(&f1), hand_panels());- assert_eq!(f1["outline"].as_array().map(Vec::len), Some(1), "{f1}");- for (i, panel) in panels.iter().enumerate() {- for &(x, y) in panel {- assert!(outline.iter().any(|p| (p.0 - x).abs() < 1e-6 && (p.1 - y).abs() < 1e-6), "flange {i}: ({x}, {y}) not in {outline:?}");- }- }- // It holds the base, the four bend zones and the four panels, nothing more or less, and its- // size is the panels' extent.- let area = w * h + (ba[0] + ba[2]) * w + (ba[1] + ba[3]) * h + panels.iter().map(|p| polygon_area(p)).sum::<f64>();- assert!(rel(polygon_area(&outline), area) < 1e-9, "{} vs {area}", polygon_area(&outline));- let all = panels.concat();- let span = |k: fn(&(f64, f64)) -> f64| all.iter().map(k).fold(f64::MIN, f64::max) - all.iter().map(k).fold(f64::MAX, f64::min);- for (k, want) in [span(|p| p.0), span(|p| p.1), 2.0].into_iter().enumerate() {- assert!((f1["flat_size_mm"][k].as_f64().unwrap_or(f64::NAN) - want).abs() < 1e-6, "{}: {want}", f1["flat_size_mm"]);- }- // Folded, the part holds that material (K = 0.5 keeps the volume).- let v1 = volume(&mut one);- assert!(rel(v1, area * 2.0) < 1e-3, "{v1} vs {}", area * 2.0);- // The DXF: the outline in straight lines, and four bend lines.- let dxf = run(&mut one, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert_eq!(dxf.matches("0\nLINE\n").count(), outline.len() + 4, "{} outline points", outline.len());- // Unfold and refold keep it.- run(&mut one, "sheet.unfold", json!({}));- assert!(same_points(&outline_points(&flat(&mut one)), &outline_points(&f1)));- run(&mut one, "sheet.refold", json!({}));- assert!(rel(volume(&mut one), v1) < 1e-9);- // Saved, an edge with its own values is an object and one without is the point it always was.- let text = one.doc.to_json();- let saved: Value = serde_json::from_str(&text).unwrap();- let flange = saved["features"]- .as_array()- .and_then(|f| f.iter().find(|f| f["type"] == "sheet_flange" && f["edges"].as_array().is_some_and(|e| e.len() == 4)));- assert_eq!(- flange.map(|f| f["edges"].clone()),- Some(json!([- [60.0, 0.0, 2.0],- {"point": [120.0, 45.0, 2.0], "angle": "90 deg"},- {"point": [60.0, 90.0, 2.0], "angle": "105", "height": "30 mm"},- {"point": [0.0, 45.0, 2.0], "angle": "120 deg", "height": "25"}- ])),- "{saved}"- );- // Reopened, it is the same part.- let mut again = Session::new(solidcraft_doc::Document::from_json(&text).unwrap());- assert!(no_errors_or_warnings(&again), "{:?}", again.model.results);- assert!(rel(volume(&mut again), v1) < 1e-9);-}--#[test]-fn per_edge_values_are_expressions_and_feature_inputs() {- let build = |angle: &str, height: &str| {- let mut s = Session::default();- alu_base(&mut s);- run(&mut s, "parameters.add", json!({"name": "wall_angle", "expression": "105 deg"}));- run(&mut s, "parameters.add", json!({"name": "wall_height", "expression": "30 mm"}));- let edges = json!([[60, 0, 2], {"point": [120, 45, 2], "angle": "90 deg"}, {"point": [60, 90, 2], "angle": angle, "height": height}]);- run(&mut s, "sheet.flange", json!({"edges": edges, "height": 38.6, "angle": "75 deg"}));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- s- };- let part = |s: &mut Session| (volume(s), outline_points(&flat(s)));- let mut s = build("wall_angle", "wall_height");- // The feature's inputs: its own, then each edge's, in the order of the edges.- let labels: Vec<String> =- s.doc.features.last().map(|f| f.kind.inputs().into_iter().map(|(l, e, _)| format!("{l}={e}")).collect()).unwrap_or_default();- assert_eq!(labels, ["Height=38.6", "Angle=75 deg", "Edge angle=90 deg", "Edge angle=wall_angle", "Edge height=wall_height"]);- // Changing the user parameters moves that flange.- run(&mut s, "parameters.change", json!({"name": "wall_angle", "expression": "110 deg"}));- run(&mut s, "parameters.change", json!({"name": "wall_height", "expression": "34 mm"}));- let (v, outline) = part(&mut build("110 deg", "34 mm"));- assert!(rel(volume(&mut s), v) < 1e-9, "{} vs {v}", volume(&mut s));- assert!(same_points(&outline_points(&flat(&mut s)), &outline));- // So does the feature's own input for an edge, by its parameter name (the last two).- let names = s.doc.features.last().map(|f| f.param_names.clone()).unwrap_or_default();- assert_eq!(names.len(), 5, "{names:?}");- run(&mut s, "parameters.change", json!({"name": names[3], "expression": "100 deg"}));- run(&mut s, "parameters.change", json!({"name": names[4], "expression": "36 mm"}));- let (v, outline) = part(&mut build("100 deg", "36 mm"));- assert!(rel(volume(&mut s), v) < 1e-9, "{} vs {v}", volume(&mut s));- assert!(same_points(&outline_points(&flat(&mut s)), &outline));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);-}--/// The bends' lengths in the flat pattern, in the order the bends were made.-fn bend_lengths(s: &mut Session) -> Vec<f64> {- flat(s)["bends"].as_array().cloned().unwrap_or_default().iter().map(|b| b["length"].as_f64().unwrap_or(f64::NAN)).collect()-}--/// A tray on a 120 wide, 90 deep base whose top edge is `top` wide (120: a rectangle), in 2 mm-/// aluminium (R 1, K 0.5) with the flange gap `gap`: walls 20 high at `deg` in one feature and,-/// in the next feature, a return 12 high at 180° − `deg` on the far edge of each of the walls-/// `returns` (0…3: bottom, right, top, left; none: no feature), picked on the walls' inner faces,-/// so that the returns turn in over the base and lie level.-fn tray_with_returns(top: f64, deg: f64, gap: &str, returns: &[usize]) -> Session {- let mut s = Session::default();- run(- &mut s,- "sheet.manage_rules",- json!({"name": "AL2", "thickness": "2 mm", "k_factor": 0.5, "bend_radius": "1 mm", "gap": gap, "active": true}),- );- let inset = (120.0 - top) / 2.0;- let pts = [(0.0, 0.0), (120.0, 0.0), (120.0 - inset, 90.0), (inset, 90.0)];- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Base"}));- run(&mut s, "sketch.line", json!({"points": pts.map(|p| [p.0, p.1]), "closed": true}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Base"}));- // A wall's inner face 20 up its outer face from the base's edge: that far in from the edge- // and that high (see the doc tests).- let th = deg.to_radians();- let (into, up) = (-20.0 * th.cos() + 2.0 * th.sin(), 20.0 * th.sin() + 2.0 * th.cos());- let pick = |k: usize, into: f64, z: f64| {- let (a, b) = (pts[k], pts[(k + 1) % 4]);- let l = (b.0 - a.0).hypot(b.1 - a.1);- json!([(a.0 + b.0) / 2.0 - (b.1 - a.1) / l * into, (a.1 + b.1) / 2.0 + (b.0 - a.0) / l * into, z])- };- let edges: Vec<Value> = (0..4).map(|k| pick(k, 0.0, 2.0)).collect();- run(&mut s, "sheet.flange", json!({"edges": edges, "height": 20, "angle": format!("{deg} deg")}));- if !returns.is_empty() {- let edges: Vec<Value> = returns.iter().map(|&k| pick(k, into, up)).collect();- run(&mut s, "sheet.flange", json!({"edges": edges, "height": 12, "angle": format!("{} deg", 180.0 - deg)}));- }- s-}--#[test]-fn returns_on_a_tray_close_at_its_corners() {- use std::f64::consts::SQRT_2;- // Walls at 90° with returns at 90°. The returns' feature used to fail here ("sew: nonmanifold- // edge contact"): each return took its wall's bend length and ran through its neighbours.- let mut s = tray_with_returns(120.0, 90.0, "0.5 mm", &[0, 1, 2, 3]);- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- // By hand (the derivation is with the doc tests; e = g/√2). The part fills 120 x 90 x 20.- let e = 0.5 / SQRT_2;- let b = bbox(&mut s);- for (k, want) in [120.0, 90.0, 20.0].into_iter().enumerate() {- let (lo, hi) = (b["min"][k].as_f64().unwrap_or(f64::NAN), b["max"][k].as_f64().unwrap_or(f64::NAN));- assert!(lo.abs() < 1e-6 && (hi - want).abs() < 1e-6, "{b}");- }- // The walls' bends are the base's trimmed edges; the returns' bends stop g/√2 short of the- // mitre x = y through (3, 3) at both ends.- let f = flat(&mut s);- let lengths = bend_lengths(&mut s);- assert_eq!(lengths.len(), 8, "{f}");- for (got, want) in lengths.iter().zip([114.0, 84.0, 114.0, 84.0, 114.0 - 2.0 * e, 84.0 - 2.0 * e, 114.0 - 2.0 * e, 84.0 - 2.0 * e]) {- assert!((got - want).abs() < 1e-6, "{lengths:?}");- }- // The flat pattern is one outline through the corners of the return's panel on the wall on- // y = 0: 9 high past two bend zones π wide and the wall's 14, mitred at 45° at both ends.- let outline = outline_points(&f);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{f}");- let (y0, y1) = (-11.0 - 2.0 * PI, -20.0 - 2.0 * PI);- for (x, y) in [(3.0 + e, y0), (117.0 - e, y0), (108.0 - e, y1), (12.0 + e, y1)] {- assert!(outline.iter().any(|p| (p.0 - x).abs() < 1e-6 && (p.1 - y).abs() < 1e-6), "({x}, {y}) not in {outline:?}");- }- // It holds the base, the walls' bends and panels and the returns' bends and panels, nothing- // more or less, and is 20 + 2π wider than the base on every side.- let area = 114.0 * 84.0 + 396.0 * PI + 28.0 * (202.0 - 4.0 * e) + 2.0 * PI * (198.0 - 4.0 * e) + 18.0 * (180.0 - 4.0 * e);- assert!(rel(polygon_area(&outline), area) < 1e-9, "{} vs {area}", polygon_area(&outline));- for (k, want) in [160.0 + 4.0 * PI, 130.0 + 4.0 * PI, 2.0].into_iter().enumerate() {- assert!((f["flat_size_mm"][k].as_f64().unwrap_or(f64::NAN) - want).abs() < 1e-6, "{}: {want}", f["flat_size_mm"]);- }- // Folded, the part holds that material (K = 0.5 keeps the volume).- let v = volume(&mut s);- assert!(rel(v, area * 2.0) < 1e-3, "{v} vs {}", area * 2.0);- // The DXF: the outline in straight lines, and eight bend lines.- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert_eq!(dxf.matches("0\nLINE\n").count(), outline.len() + 8, "{} outline points", outline.len());- // Unfold and refold keep it.- run(&mut s, "sheet.unfold", json!({}));- assert!(same_points(&outline_points(&flat(&mut s)), &outline));- run(&mut s, "sheet.refold", json!({}));- assert!(rel(volume(&mut s), v) < 1e-9);- // Reopened, it is the same part.- let mut again = Session::new(solidcraft_doc::Document::from_json(&s.doc.to_json()).unwrap());- assert!(no_errors_or_warnings(&again), "{:?}", again.model.results);- assert!(rel(volume(&mut again), v) < 1e-9);- assert!(same_points(&outline_points(&flat(&mut again)), &outline));-}--#[test]-fn returns_on_leaning_walls_stay_inside_the_walls() {- // A trapezoid (corners of 77.5° and 102.5°) with walls at 110° and level returns at 70°. Each- // return used to run its wall's bend length from where the wall's far edge started, out- // through the neighbouring wall: the part reached x = 120.588 where its walls end at 117.587.- let mut s = tray_with_returns(80.0, 110.0, "0.5 mm", &[0, 1, 2, 3]);- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- // The returns lie inside the walls and no higher than their tips: the part's box is the- // walls' own.- let (with, without) = (bbox(&mut s), bbox(&mut tray_with_returns(80.0, 110.0, "0.5 mm", &[])));- for end in ["min", "max"] {- for k in 0..3 {- let (a, b) = (with[end][k].as_f64().unwrap_or(f64::NAN), without[end][k].as_f64().unwrap_or(f64::NAN));- assert!((a - b).abs() < 1e-6, "{with} vs {without}");- }- }- // By hand (the doc tests): a return's panel starts v = 3·sin 110° + (20 − 3·tan 35°)·cos 70°- // in from its wall's edge, and at a base corner of angle α its bend stops- // x_b = (g/2 + v·cos(α/2)) / sin(α/2) along the edge from the corner.- let th = 110f64.to_radians();- let v = 3.0 * th.sin() - (20.0 - 3.0 * 35f64.to_radians().tan()) * th.cos();- let x_b = |alpha: f64| (0.25 + v * (alpha / 2.0).cos()) / (alpha / 2.0).sin();- let (acute, side) = ((90.0f64 / 20.0).atan(), 20f64.hypot(90.0));- let want = [120.0 - 2.0 * x_b(acute), side - x_b(acute) - x_b(PI - acute), 80.0 - 2.0 * x_b(PI - acute), side - x_b(acute) - x_b(PI - acute)];- let lengths = bend_lengths(&mut s);- assert_eq!(lengths.len(), 8, "{lengths:?}");- for (got, want) in lengths[4..].iter().zip(want) {- assert!((got - want).abs() < 1e-6, "{lengths:?} vs {want:?}");- }- // One outline in the flat, and the folded part holds its material.- let f = flat(&mut s);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{f}");- let (outline, vol) = (outline_points(&f), volume(&mut s));- assert!(rel(vol, polygon_area(&outline) * 2.0) < 1e-3, "{vol} vs {}", polygon_area(&outline) * 2.0);- run(&mut s, "sheet.unfold", json!({}));- assert!(same_points(&outline_points(&flat(&mut s)), &outline));- run(&mut s, "sheet.refold", json!({}));- assert!(rel(volume(&mut s), vol) < 1e-9);-}--#[test]-fn a_return_alone_on_a_leaning_wall_keeps_out_of_the_walls_beside_it() {- use std::f64::consts::SQRT_2;- // The tray with walls at 110° and a level return on the wall on y = 0 only. It used to take- // that wall's bend length (120 − 2·3·tan 55° = 111.431) from where the wall's far edge starts- // and came out through the wall on x = 120: the part reached x = 120.504 where its walls end- // at 118.716.- let mut s = tray_with_returns(120.0, 110.0, "0.5 mm", &[0]);- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- let (with, without) = (bbox(&mut s), bbox(&mut tray_with_returns(120.0, 110.0, "0.5 mm", &[])));- for end in ["min", "max"] {- for k in 0..3 {- let (a, b) = (with[end][k].as_f64().unwrap_or(f64::NAN), without[end][k].as_f64().unwrap_or(f64::NAN));- assert!((a - b).abs() < 1e-6, "{with} vs {without}");- }- }- // By hand (the doc tests): the walls beside it lean in over it and come nearest at its top,- // 20·sin 110° up, where their inner faces are 2/sin 110° + 20·cos 70° in from the base's edges.- // The return stops square g/√2 short of them at both ends: 120 − 2·9.322312 = 101.355376.- let th = 110f64.to_radians();- let want = 120.0 - 2.0 * (0.5 / SQRT_2 + 2.0 / th.sin() - 20.0 * th.cos());- let lengths = bend_lengths(&mut s);- assert!(lengths.len() == 5 && (lengths[4] - want).abs() < 1e-6 && (want - 101.355376).abs() < 1e-6, "{lengths:?} vs {want}");- // One outline in the flat, and the folded part holds its material.- let f = flat(&mut s);- assert_eq!(f["outline"].as_array().map(Vec::len), Some(1), "{f}");- let (outline, vol) = (outline_points(&f), volume(&mut s));- assert!(rel(vol, polygon_area(&outline) * 2.0) < 1e-3, "{vol} vs {}", polygon_area(&outline) * 2.0);-}--#[test]-fn returns_follow_the_rules_gap_and_stay_open_with_a_warning_when_it_is_zero() {- use std::f64::consts::SQRT_2;- // The mitre keeps the rule's gap: at 90° the returns' bends are 114 − 2·g/√2 and 84 − 2·g/√2.- let mut s = tray_with_returns(120.0, 90.0, "0.5 mm", &[0, 1, 2, 3]);- for g in [0.5, 1.0, 0.2] {- run(&mut s, "sheet.manage_rules", json!({"name": "AL2", "gap": format!("{g} mm")}));- assert!(no_errors_or_warnings(&s), "{g}: {:?}", s.model.results);- let lengths = bend_lengths(&mut s);- assert_eq!(lengths.len(), 8, "{g}: {lengths:?}");- for (got, want) in lengths[4..].iter().zip([114.0, 84.0, 114.0, 84.0]) {- assert!((got - (want - 2.0 * g / SQRT_2)).abs() < 1e-6, "{g}: {lengths:?}");- }- }- // A gap of zero can't be kept: the walls' corners and the returns' corners are left open,- // each feature with its warning, and each return spans its wall's far edge (here the wall's- // bend, 120 − 2·3·tan 55°).- let mut s = tray_with_returns(120.0, 110.0, "0 mm", &[0, 1, 2, 3]);- let warnings: Vec<String> = s.model.results.iter().filter_map(|r| r.warning.clone()).collect();- assert!(s.model.results.iter().all(|r| r.error.is_none()) && warnings.len() == 2, "{:?}", s.model.results);- assert!(warnings.iter().all(|w| w.matches("left open").count() == 4), "{warnings:?}");- let lengths = bend_lengths(&mut s);- assert!((lengths[4] - lengths[0]).abs() < 1e-9 && (lengths[0] - (120.0 - 6.0 * 55f64.to_radians().tan())).abs() < 1e-6, "{lengths:?}");-}--#[test]-fn bad_per_edge_input_is_refused_and_plain_edges_stay_plain() {- let mut s = Session::default();- alu_base(&mut s);- let err = |s: &mut Session, edges: Value| {- s.execute("sheet.flange", &json!({"edges": edges, "height": 38.6, "angle": "90 deg"})).err().map(|e| e.to_string()).unwrap_or_default()- };- // The wrong kind of value, or no expression at all: the edge and the key are named.- let e = err(&mut s, json!([[60, 0, 2], {"point": [120, 45, 2], "angle": "10 mm"}]));- assert!(e.contains("edges[1].angle"), "{e}");- let e = err(&mut s, json!([{"point": [60, 0, 2], "height": "30 deg"}]));- assert!(e.contains("edges[0].height"), "{e}");- let e = err(&mut s, json!([{"point": [60, 0, 2], "angle": "nope"}]));- assert!(e.contains("edges[0].angle"), "{e}");- let e = err(&mut s, json!([{"point": [60, 0, 2], "angle": [1, 2]}]));- assert!(e.contains("edges[0]") && e.contains("`angle` must be a number or an expression"), "{e}");- // An unknown key, a point that is none, an angle without `point`, something that is no edge.- let e = err(&mut s, json!([{"point": [60, 0, 2], "twist": 3}]));- assert!(e.contains("edges[0]") && e.contains("unknown key `twist`"), "{e}");- let e = err(&mut s, json!([{"point": [60, 0], "angle": "60 deg"}]));- assert!(e.contains("edges[0]") && e.contains("`point` must be [x, y, z]"), "{e}");- let e = err(&mut s, json!([{"x": 60, "y": 0, "z": 2, "angle": "60 deg"}]));- assert!(e.contains("edges[0]") && e.contains("unknown key"), "{e}");- let e = err(&mut s, json!([{"angle": "60 deg"}]));- assert!(e.contains("edges[0]") && e.contains("`point` must be [x, y, z]"), "{e}");- let e = err(&mut s, json!(["edge"]));- assert!(e.contains("edges[0]"), "{e}");- let e = err(&mut s, json!([]));- assert!(e.contains("1…1000"), "{e}");- // Evaluated: an angle outside 0…180° and a height under the bend's, each naming its edge.- let e = err(&mut s, json!([[60, 0, 2], {"point": [120, 45, 2], "angle": "200 deg"}]));- assert!(e.contains("edge 2") && e.contains("angle must be between 0 and 180"), "{e}");- let e = err(&mut s, json!([{"point": [60, 0, 2], "height": "2 mm"}, [120, 45, 2]]));- assert!(e.contains("edge 1") && e.contains("height must be at least"), "{e}");- // None of it added a feature.- assert_eq!(s.doc.features.len(), 2, "{:?}", s.doc.features.iter().map(|f| f.name.clone()).collect::<Vec<_>>());- // Plain points, `{x, y, z}` points and `{point}` without values are saved as the points they were.- run(&mut s, "sheet.flange", json!({"edges": [[60, 0, 2], {"x": 120, "y": 45, "z": 2}, {"point": [60, 90, 2]}], "height": 20, "angle": "90 deg"}));- let edges = serde_json::to_value(s.doc.features.last().map(|f| f.kind.clone())).unwrap()["edges"].clone();- assert_eq!(edges, json!([[60.0, 0.0, 2.0], [120.0, 45.0, 2.0], [60.0, 90.0, 2.0]]));-}--#[test]-fn editing_a_flange_keeps_each_edges_own_values_with_its_edge() {- let mut s = four_angles_in_one_feature();- let id = s.doc.features.last().map(|f| f.id).unwrap_or(0);- // Give the first edge 80° and take the 90° off the second.- let edges = json!([- {"point": [60, 0, 2], "angle": "80 deg"},- [120, 45, 2],- {"point": [60, 90, 2], "angle": "105 deg", "height": "30 mm"},- {"point": [0, 45, 2], "angle": "120 deg", "height": "25 mm"}- ]);- run(&mut s, "timeline.edit", json!({"feature": id, "set": {"edges": edges}}));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- assert_eq!(bend_angles(&mut s), [80.0, 75.0, 105.0, 120.0]);- let kind = |s: &Session| serde_json::to_value(s.doc.features.last().map(|f| f.kind.clone())).unwrap();- assert_eq!(kind(&s)["edges"][1], json!([120.0, 45.0, 2.0]), "no value of its own: a plain point again");- let (v, outline) = (volume(&mut s), outline_points(&flat(&mut s)));- // The same edges in another order are the same part: each value follows its edge.- let edges = json!([- {"point": [0, 45, 2], "angle": "120 deg", "height": "25 mm"},- {"point": [60, 90, 2], "angle": "105 deg", "height": "30 mm"},- {"point": [60, 0, 2], "angle": "80 deg"},- [120, 45, 2]- ]);- run(&mut s, "timeline.edit", json!({"feature": id, "set": {"edges": edges}}));- assert!(no_errors_or_warnings(&s), "{:?}", s.model.results);- assert_eq!(bend_angles(&mut s), [120.0, 105.0, 80.0, 75.0]);- assert!(rel(volume(&mut s), v) < 1e-9, "{} vs {v}", volume(&mut s));- assert!(same_points(&outline_points(&flat(&mut s)), &outline));- // A bad edit is refused and leaves the feature as it was.- let before = kind(&s);- assert!(s.execute("timeline.edit", &json!({"feature": id, "set": {"edges": [{"point": [60, 0, 2], "angle": "80 deg", "colour": 1}]}})).is_err());- assert!(s.execute("timeline.edit", &json!({"feature": id, "set": {"edges": [{"point": [60, 0, 2], "angle": "250 deg"}]}})).is_err());- assert_eq!(kind(&s), before);- assert_eq!(bend_angles(&mut s), [120.0, 105.0, 80.0, 75.0]);-}--#[test]-fn designs_without_per_edge_values_are_read_and_written_as_before() {- let mut s = Session::default();- alu_base(&mut s);- run(&mut s, "sheet.flange", json!({"edges": [[60, 0, 2], [120, 45, 2], [60, 90, 2], [0, 45, 2]], "height": 38.6, "angle": "72 deg"}));- let v = volume(&mut s);- let text = s.doc.to_json();- let mut design: Value = serde_json::from_str(&text).unwrap();- let flange = design["features"].as_array().and_then(|f| f.iter().position(|f| f["type"] == "sheet_flange")).unwrap();- assert_eq!(design["features"][flange]["edges"], json!([[60.0, 0.0, 2.0], [120.0, 45.0, 2.0], [60.0, 90.0, 2.0], [0.0, 45.0, 2.0]]));- let mut same = Session::new(solidcraft_doc::Document::from_json(&text).unwrap());- assert!(rel(volume(&mut same), v) < 1e-12);- // A design file whose last edge carries its own angle is the part the command makes.- design["features"][flange]["edges"][3] = json!({"point": [0.0, 45.0, 2.0], "angle": "100 deg"});- let mut opened = Session::new(solidcraft_doc::Document::from_json(&design.to_string()).unwrap());- assert!(no_errors_or_warnings(&opened), "{:?}", opened.model.results);- let mut made = Session::default();- alu_base(&mut made);- let edges = json!([[60, 0, 2], [120, 45, 2], [60, 90, 2], {"point": [0, 45, 2], "angle": "100 deg"}]);- run(&mut made, "sheet.flange", json!({"edges": edges, "height": 38.6, "angle": "72 deg"}));- let (vo, vm) = (volume(&mut opened), volume(&mut made));- assert!(rel(vo, vm) < 1e-9 && rel(vo, v) > 1e-4, "{vo} vs {vm} vs {v}");- // A key this build doesn't know is refused, not dropped.- design["features"][flange]["edges"][3] = json!({"point": [0.0, 45.0, 2.0], "twist": "3 deg"});- assert!(solidcraft_doc::Document::from_json(&design.to_string()).is_err());-}--/// Names of the hole's side faces (curved, smaller than the bend faces) in `Body1`.-fn hole_face_names(s: &mut Session) -> Vec<String> {- let faces = run(s, "model.faces", json!({"body": "Body1"}));- let faces = faces["faces"].as_array().cloned().unwrap_or_default();- faces- .iter()- .filter(|f| f["plane_normal"].is_null() && f["area"].as_f64().is_some_and(|a| a < 100.0))- .map(|f| f["name"].as_str().unwrap_or_default().to_string())- .collect()-}--#[test]-fn a_hole_on_a_folded_panel_keeps_the_name_of_its_sketch_circle() {- // A Ø10 hole at x = 20 on a 100 x 60 plate; the fold at x = 40 stands that (smaller) side up.- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- let circle = run(&mut s, "sketch.circle.center", json!({"center": [20, 30], "radius": 5}));- let curve = circle["curves"][0].as_str().unwrap_or("c1").to_string();- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Hole", "through_all": true, "operation": "cut", "direction": "symmetric"}));- let side = format!(":side:{curve}#");- let flat = hole_face_names(&mut s);- assert_eq!(flat.len(), 2, "{flat:?}");- assert!(flat.iter().all(|n| n.contains(&side)), "before the fold: {flat:?}");- fold_line(&mut s);- run(&mut s, "sheet.fold", json!({"sketch": "FoldLine", "curve": "fl"}));- assert!(bbox(&mut s)["max"][2].as_f64().unwrap_or(0.0) > 20.0, "the hole's panel stands up");- let folded = hole_face_names(&mut s);- assert_eq!(folded.len(), 2, "{folded:?}");- assert!(folded.iter().all(|n| n.contains(&side)), "after the fold the hole is still circle {curve}: {folded:?} (before: {flat:?})");-}--#[test]-fn a_box_cut_straight_through_a_flat_sheet_is_a_cutout_like_the_extrude_cut() {- // A 10 x 10 box perpendicular to the sheet and through its whole thickness removes exactly- // what a sketch rectangle extruded through all removes, which is accepted today.- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "solid.box", json!({"corner": [20, 20, -1], "length": 10, "width": 10, "height": 5, "operation": "cut"}));- let mut extruded = Session::default();- base(&mut extruded, 100.0, 60.0);- rectangle_tool(&mut extruded, "Hole", [20.0, 20.0], [30.0, 30.0]);- run(&mut extruded, "solid.extrude", json!({"sketch": "Hole", "through_all": true, "direction": "symmetric", "operation": "cut"}));- for session in [&mut s, &mut extruded] {- assert!((volume(session) - 14750.0).abs() < 1e-6);- assert_eq!(flat(session)["cutouts"].as_array().map(Vec::len), Some(1));- }- run(&mut s, "sheet.unfold", json!({}));- run(&mut s, "sheet.refold", json!({}));- assert!((volume(&mut s) - 14750.0).abs() < 1e-6);- // A cylinder along the sheet normal is a round hole, exact in the flat pattern and DXF.- run(&mut s, "solid.cylinder", json!({"base": [70, 30, -1], "radius": 5, "height": 5, "operation": "cut"}));- assert_eq!(flat(&mut s)["cutouts"].as_array().map(Vec::len), Some(2));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert!(dxf.contains("CIRCLE"), "the hole stays a circle");- assert!((volume(&mut s) - (14750.0 - PI * 25.0 * 2.5)).abs() < 0.5);- // A box that only dents the top face is a pocket of constant depth.- run(&mut s, "solid.box", json!({"corner": [50, 10, 1.5], "length": 10, "width": 10, "height": 5, "operation": "cut"}));- let f = flat(&mut s);- assert_eq!(f["pockets"].as_array().map(Vec::len), Some(1));- assert_eq!(f["pockets"][0]["depth_mm"], 1.0);- // A box across a folded bend, or a cylinder lying in the sheet, is still 3D machining- // and still refused atomically.- let mut tilted = Session::default();- base(&mut tilted, 100.0, 60.0);- run(&mut tilted, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- let before = tilted.doc.to_json();- let error = tilted- .execute("solid.box", &json!({"corner": [40, -10, -5], "length": 20, "width": 20, "height": 40, "operation": "cut"}))- .unwrap_err()- .to_string();- assert!(error.contains("bend") || error.contains("preserv"), "{error}");- assert_eq!(tilted.doc.to_json(), before);- let error = s- .execute("solid.cylinder", &json!({"base": [10, 50, 1.25], "axis": "X", "radius": 1, "height": 20, "operation": "cut"}))- .unwrap_err()- .to_string();- assert!(error.contains("preserv"), "{error}");-}--#[test]-fn flat_pattern_reports_a_round_hole_as_a_circle() {- // The DXF export already writes this hole as a CIRCLE; the JSON flat pattern should say- // "circle, centre (50, 30), radius 1.6" too, not only a sampled polyline: any object in the- // cut-out's shape that has a `center` and a `radius` counts.- fn circles(v: &Value, out: &mut Vec<([f64; 2], f64)>) {- match v {- Value::Object(m) => {- let center = m.get("center").and_then(Value::as_array).and_then(|c| Some([c.first()?.as_f64()?, c.get(1)?.as_f64()?]));- if let (Some(center), Some(radius)) = (center, m.get("radius").and_then(Value::as_f64)) {- out.push((center, radius));- }- m.values().for_each(|v| circles(v, out));- }- Value::Array(a) => a.iter().for_each(|v| circles(v, out)),- _ => {}- }- }- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Hole"}));- run(&mut s, "sketch.circle.center", json!({"center": [50, 30], "radius": 1.6}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Hole", "through_all": true, "direction": "symmetric", "operation": "cut"}));- let dxf = run(&mut s, "sheet.export_dxf", json!({}))["dxf"].as_str().unwrap_or_default().to_string();- assert!(dxf.contains("CIRCLE"), "the DXF keeps the circle");- let f = flat(&mut s);- let cutouts = f["cutouts"].as_array().cloned().unwrap_or_default();- assert_eq!(cutouts.len(), 1);- // The point list stays for existing readers; `cutout_shapes` carries the exact shape.- assert!(cutouts[0].as_array().is_some_and(|p| p.len() > 8));- let shapes = f["cutout_shapes"].as_array().cloned().unwrap_or_default();- assert_eq!(shapes.len(), 1);- let mut found = Vec::new();- circles(&shapes[0], &mut found);- let shown: String = shapes[0].to_string().chars().take(120).collect();- assert!(- found.iter().any(|(c, r)| (c[0] - 50.0).abs() < 1e-9 && (c[1] - 30.0).abs() < 1e-9 && (r - 1.6).abs() < 1e-9),- "the round hole is not reported as a circle: {shown} ..."- );- // A slot is its two lines and two half-circle arcs, exactly.- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Slot"}));- run(&mut s, "sketch.slot.overall", json!({"p0": [10, 10], "p1": [30, 10], "width": 4}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "solid.extrude", json!({"sketch": "Slot", "through_all": true, "direction": "symmetric", "operation": "cut"}));- let f = flat(&mut s);- let shapes = f["cutout_shapes"].as_array().cloned().unwrap_or_default();- assert_eq!(shapes.len(), f["cutouts"].as_array().map_or(0, Vec::len));- let slot = shapes.iter().find(|s| s.get("segments").is_some()).cloned().unwrap_or_default();- let segments = slot["segments"].as_array().cloned().unwrap_or_default();- assert_eq!(segments.iter().filter(|s| s.get("line").is_some()).count(), 2, "{slot}");- let arcs: Vec<&Value> = segments.iter().filter_map(|s| s.get("arc")).collect();- assert_eq!(arcs.len(), 2, "{slot}");- assert!(- arcs.iter()- .all(|a| (a["radius"].as_f64().unwrap_or(0.0) - 2.0).abs() < 1e-9 && (a["sweep_deg"].as_f64().unwrap_or(0.0).abs() - 180.0).abs() < 1e-6)- );-}--#[test]-fn a_flange_asked_for_0_8_mm_is_0_8_mm_or_refused_never_silently_2_5_mm() {- // `thickness` on sheet.flange may become an inline override of the rule, or be refused as- // an unknown parameter; either is fine. Building the default 2.5 mm sheet silently is not.- let mut s = Session::default();- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Base"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.finish", json!({}));- match s.execute("sheet.flange", &json!({"sketch": "Base", "thickness": 0.8})) {- Ok(_) => {- assert!((flat(&mut s)["thickness"].as_f64().unwrap_or(f64::NAN) - 0.8).abs() < 1e-9);- assert!((volume(&mut s) - 100.0 * 60.0 * 0.8).abs() < 1e-6, "built at {} mm3", volume(&mut s));- }- Err(e) => assert!(e.to_string().contains("thickness"), "{e}"),- }-}--/// A new fold still refuses a `fixed` point in a cut-out or past the outline, leaving the design-/// untouched (#263); a stored one that drifts off the sheet keeps its side with a warning (#370).-#[test]-fn fold_refuses_a_new_fixed_point_off_the_sheet_but_warns_on_recompute() {- let mut s = Session::default();- run(&mut s, "parameters.change", json!({"name": "w", "expression": "100 mm"}));- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Blank"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.dimension", json!({"entities": ["l1"], "value": "w"}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Blank"}));- rectangle_tool(&mut s, "Window", [10.0, 15.0], [30.0, 45.0]);- run(&mut s, "solid.extrude", json!({"sketch": "Window", "through_all": true, "direction": "symmetric", "operation": "cut"}));- let before = s.doc.to_json();- let undo = s.undo.len();- for fixed in [json!([20, 30, 2.5]), json!([150, 30, 2.5])] {- let e = s.execute("sheet.fold", &json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": fixed})).unwrap_err().to_string();- assert!(e.contains("fixed") && e.contains("not on the sheet"), "{fixed}: {e}");- assert_eq!(s.doc.to_json(), before);- assert_eq!(s.undo.len(), undo);- }- run(&mut s, "sheet.fold", json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": [90, 30, 2.5], "name": "Fold1"}));- assert!(run(&mut s, "timeline.inspect", json!({"feature": "Fold1"}))["warning"].is_null());- run(&mut s, "parameters.change", json!({"name": "w", "expression": "80 mm"}));- let fold = run(&mut s, "timeline.inspect", json!({"feature": "Fold1"}));- assert!(fold["error"].is_null(), "{fold}");- assert!(fold["warning"].as_str().is_some_and(|w| w.contains("fixed point is not on the sheet") && w.contains("stays")), "{fold}");-}--/// Points away from the sheet are refused atomically; points on any face of it, on a flange's-/// leg, or a hair off a face still pick the side that stays (#371).-#[test]-fn fold_fixed_point_must_touch_the_sheet_but_any_face_will_do() {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- let before = s.doc.to_json();- let undo = s.undo.len();- for fixed in [json!([90, 30, 20]), json!([90, 30, -10])] {- let e = s.execute("sheet.fold", &json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": fixed})).unwrap_err().to_string();- assert!(e.contains("fixed") && e.contains("not on the sheet"), "{fixed}: {e}");- assert_eq!(s.doc.to_json(), before);- assert_eq!(s.undo.len(), undo);- }- // The left (smaller) side stays: the right part stands up.- for fixed in [json!([10, 30, 2.5]), json!([10, 30, 0]), json!([0, 30, 1.25]), json!([10, 30, 2.500001])] {- let mut s = Session::default();- base(&mut s, 100.0, 60.0);- run(&mut s, "sheet.fold", json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": fixed, "name": "Fold1"}));- let bb = bbox(&mut s);- assert!(bb["min"][0].as_f64().unwrap_or(f64::NAN).abs() < 1e-6 && bb["max"][0].as_f64().unwrap_or(f64::NAN) < 50.0, "{fixed}: {bb}");- assert!(run(&mut s, "timeline.inspect", json!({"feature": "Fold1"}))["warning"].is_null(), "{fixed}");- }- // A point on an edge flange's leg (far above the base panel's slab) is on the sheet.- let mut f = Session::default();- run(&mut f, "parameters.change", json!({"name": "h", "expression": "20 mm"}));- base(&mut f, 100.0, 60.0);- run(&mut f, "sheet.flange", json!({"edges": [[100, 30, 2.5]], "height": "h"}));- let bb = bbox(&mut f);- let x = bb["max"][0].as_f64().unwrap_or(f64::NAN);- run(&mut f, "sheet.fold", json!({"points": [[40, 0, 2.5], [40, 60, 2.5]], "fixed": [x, 30, 15], "name": "Fold1"}));- assert!(run(&mut f, "timeline.inspect", json!({"feature": "Fold1"}))["warning"].is_null());- // A shorter leg leaves the stored point in the air: the fold recomputes, keeps its side and warns.- run(&mut f, "parameters.change", json!({"name": "h", "expression": "10 mm"}));- let fold = run(&mut f, "timeline.inspect", json!({"feature": "Fold1"}));- assert!(fold["error"].is_null(), "{fold}");- assert!(fold["warning"].as_str().is_some_and(|w| w.contains("fixed point is not on the sheet")), "{fold}");- assert!((bbox(&mut f)["max"][0].as_f64().unwrap_or(f64::NAN) - x).abs() < 1e-6, "the right side stays");-}--/// The middle of the largest triangle of each flat face of the first body: well inside it.-fn flat_face_points(s: &Session) -> Vec<(usize, solidcraft_geom::Vec3, solidcraft_geom::Vec3)> {- let state = s.model.state();- let body = &state.bodies[0].body;- let mesh = body.tessellate(0.01).unwrap();- (0..body.face_count())- .filter_map(|index| {- let normal = body.planar_face(index)?.normal();- let point = mesh- .triangles- .iter()- .zip(&mesh.tri_face)- .filter(|(_, f)| **f as usize == index)- .filter_map(|(t, _)| mesh.tri(t))- .max_by(|[a, b, c], [d, e, f]| (*b - *a).cross(*c - *a).len().total_cmp(&(*e - *d).cross(*f - *d).len()))- .map(|[a, b, c]| (a + b + c) * (1.0 / 3.0))?;- Some((index, point, normal))- })- .collect()-}--/// Every flat face of a sheet takes an attached sketch (#495): its panels, the rims along the-/// panels' straight edges (named by the base sketch line or the flange's far edge and sides) and-/// the flat ends of a bend. Each lies on its face, facing out of the sheet, and a rim's sketch-/// follows the rim when the base grows. A press-pull on a rim pushes it out, and a plain hole into-/// a panel is kept as a cut-out of the flat pattern (#560).-#[test]-fn every_flat_face_of_a_sheet_takes_an_attached_sketch() {- let mut s = Session::default();- run(&mut s, "parameters.add", json!({"name": "W", "expression": "100 mm"}));- run(&mut s, "sketch.create", json!({"plane": "XY", "name": "Base"}));- run(&mut s, "sketch.rectangle.two_point", json!({"p0": [0, 0], "p1": [100, 60]}));- run(&mut s, "sketch.constraint.fix", json!({"entities": ["p1"]}));- run(&mut s, "sketch.dimension", json!({"entities": ["l1"], "value": "W"}));- run(&mut s, "sketch.finish", json!({}));- run(&mut s, "sheet.flange", json!({"sketch": "Base"}));- run(&mut s, "sheet.flange", json!({"edges": [[50, 0, 2.5]], "height": 20}));- let faces = flat_face_points(&s);- // The base: its two faces and three rims (the fourth edge bends); the flange: its two faces,- // its far rim and two sides; the two ends of the bend.- assert_eq!(faces.len(), 12);- let mut on_side = None;- for (index, point, normal) in faces {- let made = run(&mut s, "sketch.create", json!({"plane": {"face": point, "body": "Body1", "index": index}}));- run(&mut s, "sketch.finish", json!({}));- assert_eq!(made["attachment"], "sheet_face", "face {index} at {point:?}");- let id = made["sketch"].as_u64().unwrap();- let solidcraft_doc::FaceAttachmentStatus::Sheet { plane: Some(plane) } = s.placed_document().sketch_face_attachment(id, &s.model) else {- panic!("face {index} at {point:?}")- };- assert!(plane.normal().dot(normal) > 1.0 - 1e-9 && (point - plane.origin).dot(normal).abs() < 1e-6, "face {index}: {plane:?}");- if (point.x - 100.0).abs() < 1e-6 && point.y > 10.0 {- on_side = Some(id);- }- }- // The base's rim along x = W (the sketch's l2) moves with W.- let side = on_side.expect("the base rim on x = 100");- run(&mut s, "parameters.change", json!({"name": "W", "expression": "120 mm"}));- let solidcraft_doc::FaceAttachmentStatus::Sheet { plane: Some(plane) } = s.placed_document().sketch_face_attachment(side, &s.model) else {- panic!("the rim sketch after the edit")- };- assert!((plane.origin.x - 120.0).abs() < 1e-9 && (plane.normal().x - 1.0).abs() < 1e-9, "{plane:?}");- // Press-pull the rim 5 mm out: the base grows by 5 x 60 x 2.5 less what the flange covers.- let v0 = volume(&mut s);- run(&mut s, "solid.press_pull", json!({"face": [120, 30, 1.25], "distance": 5}));- assert!(volume(&mut s) > v0 + 5.0 * 50.0 * 2.5, "{} {v0}", volume(&mut s));- // A plain hole into the base is a cut-out of the flat pattern.- let mut t = Session::default();- plate_with_flange(&mut t);- let v0 = volume(&mut t);- run(&mut t, "solid.hole", json!({"position": [50, 30, 2.5], "direction": [0, 0, -1], "diameter": 6}));- assert!((v0 - volume(&mut t) - PI * 9.0 * 2.5).abs() < 0.1, "{}", v0 - volume(&mut t));- let f = flat(&mut t);- assert_eq!(f["cutouts"].as_array().map(Vec::len), Some(1), "{f}");-}