Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 33/509: kernel-cases: shell and offset from #12-#4144 (21 cases, 59 skipped)

bherbruck82983c2e6360
diff --git a/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json b/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json
new file mode 100644
index 0000000000..12106aa495
--- /dev/null
+++ b/tests/kernel-cases/shell/12-offset-one-split-face-piece/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#12"
+ ],
+ "what": "Offset Face on one piece of a split face moves only that piece, not the coplanar neighbour",
+ "source": "analytic",
+ "method": "box 40x30x10, top face split at x=20; the x<20 piece moves up 2 mm: V=12000+20*30*2=13200; faces: bottom, front, back, left, right, two top pieces, step wall at x=20 = 8; bbox z 0..12",
+ "body_count": 1,
+ "volume_mm3": 13200,
+ "faces": 8
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json b/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json
new file mode 100644
index 0000000000..4a616f0527
--- /dev/null
+++ b/tests/kernel-cases/shell/12-offset-one-split-face-piece/recipe.json
@@ -0,0 +1,49 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 30,
+ "height": 10
+ }
+ },
+ {
+ "command": "solid.split_face",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 15,
+ 10
+ ]
+ ],
+ "plane": {
+ "origin": [
+ 20,
+ 0,
+ 0
+ ],
+ "normal": [
+ 1,
+ 0,
+ 0
+ ]
+ }
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 15,
+ 10
+ ]
+ ],
+ "distance": 2
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json
new file mode 100644
index 0000000000..5763000b77
--- /dev/null
+++ b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/expected.json
@@ -0,0 +1,9 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1494"
+ ],
+ "what": "a 47.5x45x30 box with a cylinder r7.5 joined on its side whose axis lies in the plane of the box's front face (y=0), shelled 1 mm open at the bottom",
+ "source": "invariants",
+ "method": "the cylinder wall's seam lies on the front plane, giving a five-face saddle corner at (47.5,0,2.5). No closed-form volume (the cavity corners follow the offset surfaces); the shell must succeed and give one valid closed body",
+ "body_count": 1
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json
new file mode 100644
index 0000000000..56dc5f9f63
--- /dev/null
+++ b/tests/kernel-cases/shell/1494-shell-box-with-cylinder-on-edge-line/recipe.json
@@ -0,0 +1,43 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "height": 30.0,
+ "length": 47.5,
+ "width": 45.0
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "axis": [
+ 1.0,
+ 0.0,
+ 0.0
+ ],
+ "base": [
+ 47.5,
+ 0.0,
+ 10.0
+ ],
+ "height": 30.0,
+ "operation": "join",
+ "radius": 7.5
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 23.75,
+ 22.5,
+ 0.0
+ ]
+ ],
+ "thickness": 1.0
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json
new file mode 100644
index 0000000000..d71d868c3a
--- /dev/null
+++ b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/expected.json
@@ -0,0 +1,9 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1525"
+ ],
+ "what": "a 50x50x30 box with r10 vertical rounds, a 5 mm chamfer round the base and a 4 mm fillet where the chamfer meets the wall, shelled 2 mm open at the top",
+ "source": "invariants",
+ "method": "every radius and the chamfer have room for a 2 mm wall, so the shell must succeed: one valid closed body (no closed-form volume with the blend patches)",
+ "body_count": 1
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json
new file mode 100644
index 0000000000..7e4f228464
--- /dev/null
+++ b/tests/kernel-cases/shell/1525-shell-box-with-rounds-chamfer-and-fillet/recipe.json
@@ -0,0 +1,154 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 50,
+ "width": 50,
+ "height": 30
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 0,
+ 0,
+ 15
+ ],
+ [
+ 50,
+ 0,
+ 15
+ ],
+ [
+ 0,
+ 50,
+ 15
+ ],
+ [
+ 50,
+ 50,
+ 15
+ ]
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 25,
+ 0,
+ 0
+ ],
+ [
+ 50,
+ 25,
+ 0
+ ],
+ [
+ 25,
+ 50,
+ 0
+ ],
+ [
+ 0,
+ 25,
+ 0
+ ],
+ [
+ 2.929,
+ 2.929,
+ 0
+ ],
+ [
+ 47.071,
+ 2.929,
+ 0
+ ],
+ [
+ 47.071,
+ 47.071,
+ 0
+ ],
+ [
+ 2.929,
+ 47.071,
+ 0
+ ]
+ ],
+ "distance": 5
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 25,
+ 0,
+ 5
+ ],
+ [
+ 50,
+ 25,
+ 5
+ ],
+ [
+ 25,
+ 50,
+ 5
+ ],
+ [
+ 0,
+ 25,
+ 5
+ ],
+ [
+ 2.929,
+ 2.929,
+ 5
+ ],
+ [
+ 47.071,
+ 2.929,
+ 5
+ ],
+ [
+ 47.071,
+ 47.071,
+ 5
+ ],
+ [
+ 2.929,
+ 47.071,
+ 5
+ ]
+ ],
+ "radius": 4
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 25,
+ 25,
+ 30
+ ]
+ ],
+ "thickness": 2
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json
new file mode 100644
index 0000000000..24f9e9dffa
--- /dev/null
+++ b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1972"
+ ],
+ "what": "a sphere split into two hemispheres; shelling the flat face of one must hollow that half only, the other half stays solid",
+ "source": "analytic",
+ "method": "two hemispheres r10, flat faces coincident at z=0. The pick (3,2,0) lies on both flat faces, so the body is named. The named half becomes a hollow hemisphere with cavity r8 open at the flat face: V=2/3*pi*(10^3-8^3); the other half is untouched: 2/3*pi*10^3. Total of two bodies",
+ "body_count": 2,
+ "volume_mm3": 3116.4599123610747
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json
new file mode 100644
index 0000000000..55c942210d
--- /dev/null
+++ b/tests/kernel-cases/shell/1972-shell-one-half-sphere-leaves-the-other/recipe.json
@@ -0,0 +1,43 @@
+{
+ "commands": [
+ {
+ "command": "solid.sphere",
+ "params": {
+ "radius": 10,
+ "body_name": "Ball"
+ }
+ },
+ {
+ "command": "solid.split_body",
+ "params": {
+ "body": "Ball",
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 0
+ ],
+ "normal": [
+ 0,
+ 0,
+ 1
+ ]
+ }
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 3,
+ 2,
+ 0
+ ]
+ ],
+ "thickness": 2,
+ "body": "Ball"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json
new file mode 100644
index 0000000000..f4a4e4e431
--- /dev/null
+++ b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2531"
+ ],
+ "what": "a shell opened by a point pick keeps opening only that face after a parameter edit moves the body under the stored point",
+ "source": "analytic",
+ "method": "after L=150, Y0=15 the bar is 150x20x20 at y 15..35, shelled 2 mm with only the right end (x=150) open: V=60000-148*16*16=22112; faces 5 outer + right-end ring + 5 inner = 11; the stored point (100,15,10) now lies in the bottom (y=15) face, which must stay closed",
+ "body_count": 1,
+ "volume_mm3": 22112,
+ "faces": 11
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json
new file mode 100644
index 0000000000..e601a1f7db
--- /dev/null
+++ b/tests/kernel-cases/shell/2531-shell-point-pick-after-parameter-edit/recipe.json
@@ -0,0 +1,123 @@
+{
+ "commands": [
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "L",
+ "expression": "100 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "Y0",
+ "expression": "5 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "S"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 5
+ ],
+ "p1": [
+ 100,
+ 25
+ ]
+ }
+ },
+ {
+ "command": "sketch.constraint.horizontal_vertical",
+ "params": {
+ "points": [
+ "origin",
+ "l1.start"
+ ],
+ "mode": "vertical"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "l1.start"
+ ],
+ "type": "vertical",
+ "value": "Y0"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l1"
+ ],
+ "type": "length",
+ "value": "L"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l4"
+ ],
+ "type": "length",
+ "value": "20 mm"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "S",
+ "distance": "20 mm",
+ "operation": "new",
+ "body_name": "Bar"
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 100,
+ 15,
+ 10
+ ]
+ ],
+ "thickness": "2 mm",
+ "direction": "inside",
+ "body": "Bar"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "L",
+ "expression": "150 mm"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "Y0",
+ "expression": "15 mm"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json b/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json
new file mode 100644
index 0000000000..be7c3b9edf
--- /dev/null
+++ b/tests/kernel-cases/shell/2939-offset-face-sphere/expected.json
@@ -0,0 +1,17 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2939"
+ ],
+ "what": "Offset Face on a sphere's round face",
+ "source": "analytic",
+ "method": "a sphere r10 whose face moves out 2 mm is a sphere r12: V=4/3*pi*12^3, area 4*pi*144, centroid at the origin, one face",
+ "body_count": 1,
+ "volume_mm3": 7238.229473870882,
+ "area_mm2": 1809.5573684677208,
+ "faces": 1,
+ "center_of_mass": [
+ 0,
+ 0,
+ 0
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json b/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json
new file mode 100644
index 0000000000..8d9723c0cf
--- /dev/null
+++ b/tests/kernel-cases/shell/2939-offset-face-sphere/recipe.json
@@ -0,0 +1,23 @@
+{
+ "commands": [
+ {
+ "command": "solid.sphere",
+ "params": {
+ "radius": 10
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 10,
+ 0,
+ 0
+ ]
+ ],
+ "distance": "2 mm"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json
new file mode 100644
index 0000000000..a0cef23212
--- /dev/null
+++ b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3103"
+ ],
+ "what": "a cone frustum (r20 at the base, r15 at the top, 30 tall) shelled 2 mm open at the top",
+ "source": "analytic",
+ "method": "outer V=pi*30/3*(20^2+20*15+15^2). Wall offset 2 normal to the cone: half-angle a=atan(5/30), inner radius r(z)=20-z*tan(a)-2/cos(a), floor at z=2. Cavity frustum height 28 from r(2) to r(30). V=outer-pi*28/3*(ra^2+ra*rb+rb^2)",
+ "body_count": 1,
+ "volume_mm3": 8292.991685180048
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json
new file mode 100644
index 0000000000..1f4cc4602c
--- /dev/null
+++ b/tests/kernel-cases/shell/3103-shell-tapered-cylinder/recipe.json
@@ -0,0 +1,45 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 20
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 30,
+ "taper": "-9.4623222080 deg",
+ "operation": "new"
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 30
+ ]
+ ],
+ "thickness": 2
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json
new file mode 100644
index 0000000000..6a0bf502f9
--- /dev/null
+++ b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/expected.json
@@ -0,0 +1,17 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3283",
+ "tangency-labs/solidcraft#3650"
+ ],
+ "what": "Offset Face on the outer cylindrical wall of a tube (the picker only accepted planar faces)",
+ "source": "analytic",
+ "method": "tube R20/r10 x 10 tall; the outer wall moves out 2 mm to R22: V=pi*(22^2-10^2)*10; faces 4 (outer, inner, top, bottom); centroid (0,0,5)",
+ "body_count": 1,
+ "volume_mm3": 12063.715789784805,
+ "faces": 4,
+ "center_of_mass": [
+ 0,
+ 0,
+ 5
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json
new file mode 100644
index 0000000000..8c83ee36b4
--- /dev/null
+++ b/tests/kernel-cases/shell/3283-offset-face-cylinder-wall/recipe.json
@@ -0,0 +1,62 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 20
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 10,
+ "operation": "new",
+ "profiles": [
+ {
+ "point": [
+ 15,
+ 0
+ ]
+ }
+ ]
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 20,
+ 0,
+ 5
+ ]
+ ],
+ "distance": "2 mm"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json
new file mode 100644
index 0000000000..535afc161f
--- /dev/null
+++ b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3468",
+ "tangency-labs/solidcraft#3898"
+ ],
+ "what": "Offset Face on a boss wall whose base has a 2 mm fillet: the boss grows to r 11 and the fillet follows",
+ "source": "analytic",
+ "method": "box 60x40x10 + boss r11 x10 + concave base fillet r2 around the boss. V=24000+pi*11^2*10+2*pi*(R+d)*A with R=11, A=r^2(1-pi/4), d=r^3(5/6-pi/4)/A (Pappus, centroid of the corner region at distance d from the wall); faces: box bottom + 4 sides + top (annulus) + fillet + boss wall + boss cap = 9",
+ "body_count": 1,
+ "volume_mm3": 27863.06545197909,
+ "faces": 9
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json
new file mode 100644
index 0000000000..ee9580a481
--- /dev/null
+++ b/tests/kernel-cases/shell/3468-offset-face-boss-wall-next-to-fillet/recipe.json
@@ -0,0 +1,51 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 10,
+ "height": 10,
+ "base": [
+ 30,
+ 20,
+ 10
+ ],
+ "operation": "join"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 40,
+ 20,
+ 10
+ ]
+ ],
+ "radius": 2
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 40,
+ 20,
+ 16
+ ]
+ ],
+ "distance": 1
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json
new file mode 100644
index 0000000000..1608c19291
--- /dev/null
+++ b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3506"
+ ],
+ "what": "a box split in two at z=10, then each half shelled 2 mm open on the mating face",
+ "source": "analytic",
+ "method": "two 40x30x10 halves; each shelled 2 mm open on the cut face: cavity 36x26x8 (the open side has no wall). V=2*(12000-7488)=9024; two bodies; faces 5+1 ring... each half has outer 5 + open-face ring 1 + cavity 5 = 11, so 22",
+ "body_count": 2,
+ "volume_mm3": 9024,
+ "faces": 22
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json
new file mode 100644
index 0000000000..46c78d8112
--- /dev/null
+++ b/tests/kernel-cases/shell/3506-split-body-then-shell-both-halves/recipe.json
@@ -0,0 +1,59 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 30,
+ "height": 20,
+ "body_name": "Blk"
+ }
+ },
+ {
+ "command": "solid.split_body",
+ "params": {
+ "body": "Blk",
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 10
+ ],
+ "normal": [
+ 0,
+ 0,
+ 1
+ ]
+ }
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 20,
+ 15,
+ 10
+ ]
+ ],
+ "thickness": 2,
+ "body": "Blk"
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 20,
+ 15,
+ 10
+ ]
+ ],
+ "thickness": 2,
+ "body": "Blk (1)"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json
new file mode 100644
index 0000000000..e33db687aa
--- /dev/null
+++ b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/expected.json
@@ -0,0 +1,9 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3576"
+ ],
+ "what": "a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces",
+ "source": "invariants",
+ "method": "no closed-form volume (tilted rounds). Invariants: the shell succeeds, one closed body, and the record's geometry check holds (every edge of the four inner rounds lies on its faces; the old offset left them up to 0.02 mm off, which other STEP readers reject)",
+ "body_count": 1
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json
new file mode 100644
index 0000000000..e6ad11c235
--- /dev/null
+++ b/tests/kernel-cases/shell/3576-shell-tapered-box-rounded-corners/recipe.json
@@ -0,0 +1,76 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 60,
+ 40
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 40,
+ "taper": "-5 deg",
+ "operation": "new"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 58.25022672948152,
+ 38.25022672948152,
+ 20
+ ],
+ [
+ 58.25022672948152,
+ -38.25022672948152,
+ 20
+ ],
+ [
+ -58.25022672948152,
+ 38.25022672948152,
+ 20
+ ],
+ [
+ -58.25022672948152,
+ -38.25022672948152,
+ 20
+ ]
+ ],
+ "radius": 4
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 40
+ ]
+ ],
+ "thickness": 2
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json
new file mode 100644
index 0000000000..759776bb51
--- /dev/null
+++ b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3669",
+ "tangency-labs/solidcraft#2990"
+ ],
+ "what": "a loft between a 40 mm and a 20 mm square 80 mm apart, shelled 2 mm open at the small end",
+ "source": "analytic",
+ "method": "a ruled loft of two squares is a square pyramid frustum (4 planar walls). Outer V=80/3*(1600+800+400). Walls offset 2 normal to the faces: tan(a)=10/80, half-width w(z)=20-z/8-2/cos(a), floor at z=2, cavity a frustum of height 78 with areas (2w(2))^2 and (2w(80))^2: V=outer-78/3*(A1+sqrt(A1*A2)+A2); faces 4 outer walls + base + top ring + 4 inner walls + floor = 11",
+ "body_count": 1,
+ "volume_mm3": 20601.135771593457,
+ "faces": 11
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json
new file mode 100644
index 0000000000..7be1a33f3f
--- /dev/null
+++ b/tests/kernel-cases/shell/3669-shell-lofted-square-frustum/recipe.json
@@ -0,0 +1,80 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "offset": 0
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 20,
+ 20
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "offset": 80
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 10,
+ 10
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Sketch1"
+ },
+ {
+ "sketch": "Sketch2"
+ }
+ ],
+ "operation": "new"
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 80
+ ]
+ ],
+ "thickness": 2,
+ "tangent_chain": false
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json
new file mode 100644
index 0000000000..31d705000e
--- /dev/null
+++ b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/expected.json
@@ -0,0 +1,9 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#391"
+ ],
+ "what": "text debossed 0.6 mm into the flat flange top of a filleted and shelled tapered housing, well away from the curved walls",
+ "source": "invariants",
+ "method": "the flange top (z=6) is planar and the text is clear of the walls, so the deboss must succeed and leave one valid closed body; the letter area is font dependent, so only the outcome and validity are graded",
+ "body_count": 1
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json
new file mode 100644
index 0000000000..9ea7e061e5
--- /dev/null
+++ b/tests/kernel-cases/shell/391-deboss-text-on-flange-of-filleted-shelled-body/recipe.json
@@ -0,0 +1,152 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 57,
+ 42
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 6,
+ "body_name": "H"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 45,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 35,
+ "taper": "-2 deg",
+ "operation": "join",
+ "profiles": [
+ {
+ "point": [
+ 0,
+ 0
+ ]
+ }
+ ]
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 45,
+ 30,
+ 20
+ ],
+ [
+ -45,
+ 30,
+ 20
+ ],
+ [
+ 45,
+ -30,
+ 20
+ ],
+ [
+ -45,
+ -30,
+ 20
+ ]
+ ],
+ "radius": 6
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 35
+ ]
+ ],
+ "thickness": 2.5
+ }
+ },
+ {
+ "command": "construct.plane.offset",
+ "params": {
+ "base": "XY",
+ "offset": 6,
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "P",
+ "name": "T"
+ }
+ },
+ {
+ "command": "sketch.text",
+ "params": {
+ "text": "AB",
+ "at": [
+ -5,
+ -39.5
+ ],
+ "height": 4
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.emboss",
+ "params": {
+ "sketch": "T",
+ "depth": 0.6,
+ "mode": "deboss"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json b/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json
new file mode 100644
index 0000000000..33c5e659fd
--- /dev/null
+++ b/tests/kernel-cases/shell/4009-closed-shell-internal-void/expected.json
@@ -0,0 +1,17 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#4009"
+ ],
+ "what": "shell with no face removed: a closed hollow body with a sealed internal void",
+ "source": "analytic",
+ "method": "outer box 40x30x12.5, void = inward offset box 35x25x7.5 (2.5 wall every side). V=15000-6562.5=8437.5; area=outer 2(1200+500+375)=4150 + void 2(875+187.5+262.5)... computed in python; faces 6+6=12; one body with an outer and an inner shell; centroid (20,15,6.25) by symmetry",
+ "body_count": 1,
+ "volume_mm3": 8437.5,
+ "area_mm2": 6800.0,
+ "faces": 12,
+ "center_of_mass": [
+ 20,
+ 15,
+ 6.25
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json b/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json
new file mode 100644
index 0000000000..4040560bde
--- /dev/null
+++ b/tests/kernel-cases/shell/4009-closed-shell-internal-void/recipe.json
@@ -0,0 +1,41 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 40,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 12.5,
+ "operation": "new"
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [],
+ "thickness": 2.5
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json
new file mode 100644
index 0000000000..d83c855a39
--- /dev/null
+++ b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/expected.json
@@ -0,0 +1,15 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#4010"
+ ],
+ "what": "plate with a through hole shelled 2.5 mm with only the hole's wall removed",
+ "source": "analytic",
+ "method": "plate 40x30x12.5 minus hole r5; cavity = inward offset box 35x25x7.5 minus the hole's cylinder (r=5 stays as the wall, height 7.5) open to the hole. V=(15000-pi*25*12.5)-(6562.5-pi*25*7.5); centroid (20,15,6.25) by symmetry",
+ "body_count": 1,
+ "volume_mm3": 8044.8009183012755,
+ "center_of_mass": [
+ 20,
+ 15,
+ 6.25
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json
new file mode 100644
index 0000000000..4a1836fdbd
--- /dev/null
+++ b/tests/kernel-cases/shell/4010-shell-open-at-through-hole-wall/recipe.json
@@ -0,0 +1,65 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 40,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 20,
+ 15
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 12.5,
+ "operation": "new",
+ "profiles": [
+ {
+ "point": [
+ 2,
+ 2
+ ]
+ }
+ ]
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 25,
+ 15,
+ 6.25
+ ]
+ ],
+ "thickness": 2.5
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json
new file mode 100644
index 0000000000..3ab33fcb4e
--- /dev/null
+++ b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#566"
+ ],
+ "what": "a 8x5 bar swept along a line-arc-line path (quarter circle r30 between two 30 mm legs), shelled 0.5 mm open at its start",
+ "source": "analytic",
+ "method": "path length L=30+15*pi+30. The section's centroid is on the path, so by Pappus V_bar=40*L. The cavity is the sweep of the 7x4 section (concentric offsets of the swept walls; the tightest radius 30-3.5 stays positive) from the open start to 0.5 mm short of the end: 28*(L-0.5). V=40*L-28*(L-0.5)",
+ "body_count": 1,
+ "volume_mm3": 1299.4866776461627
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json
new file mode 100644
index 0000000000..181955f648
--- /dev/null
+++ b/tests/kernel-cases/shell/566-shell-swept-bar-with-bend/recipe.json
@@ -0,0 +1,112 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XZ",
+ "name": "Path"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 30
+ ]
+ ],
+ "ids": [
+ "l1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.three_point",
+ "params": {
+ "start": "l1.end",
+ "through": [
+ 8.787,
+ 51.213
+ ],
+ "end": [
+ 30,
+ 60
+ ],
+ "id": "a1"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ "a1.end",
+ [
+ 60,
+ 60
+ ]
+ ],
+ "ids": [
+ "l2"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "Section"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 4,
+ 2.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.sweep",
+ "params": {
+ "sketch": "Section",
+ "path_sketch": "Path",
+ "path": [
+ "l1",
+ "a1",
+ "l2"
+ ]
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 0
+ ]
+ ],
+ "thickness": 0.5
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json
new file mode 100644
index 0000000000..ffbe1034be
--- /dev/null
+++ b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#745",
+ "tangency-labs/solidcraft#3893"
+ ],
+ "what": "Offset Face on a planar end of a body that has a spline-outlined boss far from the moved face",
+ "source": "invariants",
+ "method": "the move is refused today only because the unrelated boss wall is freeform. The operation must succeed and give one valid closed solid; the box end at x=0 moves out by 1 mm (the boss area is a spline integral, so no absolute volume is asserted; the 200 mm3 change is graded in the cut-away variant 745-offset-face-then-cut-boss-away)",
+ "body_count": 1
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json
new file mode 100644
index 0000000000..902cb1b765
--- /dev/null
+++ b/tests/kernel-cases/shell/745-offset-face-on-body-with-distant-freeform-boss/recipe.json
@@ -0,0 +1,107 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 40,
+ "width": 20,
+ "height": 10,
+ "body_name": "B"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 10
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "S"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 25,
+ 5
+ ],
+ [
+ 35,
+ 5
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.spline.fit_point",
+ "params": {
+ "points": [
+ [
+ 35,
+ 5
+ ],
+ [
+ 37,
+ 10
+ ],
+ [
+ 30,
+ 15
+ ],
+ [
+ 25,
+ 5
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "S",
+ "distance": 5,
+ "operation": "join",
+ "targets": [
+ "B"
+ ]
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 10,
+ 5
+ ]
+ ],
+ "distance": "1 mm"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json
new file mode 100644
index 0000000000..ecb617c6d3
--- /dev/null
+++ b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#745",
+ "tangency-labs/solidcraft#3893"
+ ],
+ "what": "the same end offset, then the boss and the box beyond x=24 cut away, which leaves an analytic body",
+ "source": "analytic",
+ "method": "after the end moves to x=-1 and the cut removes everything at x>=24 (the spline boss lies at x 25..37.x, inside the cut): a box x -1..24, 20 wide, 10 tall: V=25*20*10=5000; 6 faces",
+ "body_count": 1,
+ "volume_mm3": 5000,
+ "faces": 6
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json
new file mode 100644
index 0000000000..2fc414b952
--- /dev/null
+++ b/tests/kernel-cases/shell/745-offset-face-then-cut-boss-away/recipe.json
@@ -0,0 +1,124 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 40,
+ "width": 20,
+ "height": 10,
+ "body_name": "B"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0,
+ 0,
+ 10
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "S"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 25,
+ 5
+ ],
+ [
+ 35,
+ 5
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.spline.fit_point",
+ "params": {
+ "points": [
+ [
+ 35,
+ 5
+ ],
+ [
+ 37,
+ 10
+ ],
+ [
+ 30,
+ 15
+ ],
+ [
+ 25,
+ 5
+ ]
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "S",
+ "distance": 5,
+ "operation": "join",
+ "targets": [
+ "B"
+ ]
+ }
+ },
+ {
+ "command": "solid.offset_face",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 10,
+ 5
+ ]
+ ],
+ "distance": "1 mm"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 24,
+ -1,
+ -1
+ ],
+ "length": 30,
+ "width": 22,
+ "height": 30,
+ "operation": "cut",
+ "targets": [
+ "B"
+ ]
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/shell/skipped.json b/tests/kernel-cases/shell/skipped.json
new file mode 100644
index 0000000000..6d00c2804a
--- /dev/null
+++ b/tests/kernel-cases/shell/skipped.json
@@ -0,0 +1,238 @@
+[
+ {
+ "source": "tangency-labs/solidcraft#142",
+ "why": "no concrete recipe: a general saddle/four-face corner construction request; its geometry is exercised by case 1494"
+ },
+ {
+ "source": "tangency-labs/solidcraft#209",
+ "why": "no geometry given (a screenshot and 'the shell removed everything'); needs the user's design"
+ },
+ {
+ "source": "tangency-labs/solidcraft#451",
+ "why": "other area: booleans (cut with a hollow spherical-shell tool)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1107",
+ "why": "other area: booleans (combine of a hollow hub with 9 lofted blades; cavity ownership)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1140",
+ "why": "other area: booleans (cutting a hollow lofted tube in half; a vertex a hair inside an edge)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1379",
+ "why": "needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal, so no wrong result is recorded"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1969",
+ "why": "needs the user's design (a sphere split into 6 faces picked by point); a closed hollow sphere is the same operation as case 4009"
+ },
+ {
+ "source": "tangency-labs/solidcraft#1996",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset of a snap-fit bottom face in an 8-body design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2259",
+ "why": "other area: booleans (second cut beside an earlier cut through a shelled arched block; mesh edge snapping, seed 61)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2421",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2432",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2445",
+ "why": "no body or recipe given (a screenshot only)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2452",
+ "why": "no body or recipe given ('complex body' only)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2478",
+ "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment), no wrong shape"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2480",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a revolved profile with a freeform face)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2493",
+ "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2556",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2557",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 12 on an 8-body design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2745",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (error: move larger than the wall; thickness 11)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2761",
+ "why": "other area: 2D sketch offset of text outlines (sketch.offset), not a solid operation"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2795",
+ "why": "not geometry: UI, the plane editor says 'select a plane first' when editing an offset plane"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2886",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2905",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell .125 in on an 8-feature part)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2917",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2928",
+ "why": "other area: booleans (join of cap-touching prisms with slightly offset cylinder walls)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2935",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#2978",
+ "why": "not geometry: UI, the mouse position is offset from the buttons"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3000",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (shell direction both)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3031",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3074",
+ "why": "needs the user's design (2 bodies, the face pick is not resolved: 'select at least one face'); a pick-resolution defect, not a shape with a known answer"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3105",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two opposite faces of a box in a 2-body design; the pick missed the faces)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3158",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3159",
+ "why": "other area: 2D sketch offset of a spline (sketch.offset), not a solid operation"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3161",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3163",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3181",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3290",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (offset face on a 13-feature, 2-body design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3341",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3346",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3492",
+ "why": "not geometry: UI, 'select the curves to offset first' (sketch offset with an empty selection)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3524",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (a 3 mm shell of a body with 41 cylinder faces; the failure is in an internal boolean cut)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3567",
+ "why": "not geometry: construction-plane editing, 'plane offsets nested too deeply'"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3574",
+ "why": "other area: 2D sketch offset of a spline (sketch.offset), not a solid operation"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3585",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3603",
+ "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3621",
+ "why": "not geometry: construction-plane attachment to a face that cannot keep its name (history/attachment)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3672",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (surface.thicken of a 9-feature body)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3721",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (filleted extruded box in a 2-body design)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3742",
+ "why": "other area: 2D sketch offset (sketch.offset, 'collapses an arc'), not a solid operation"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3774",
+ "why": "not geometry: a feature request (clearance input on Combine cut)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3795",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (two faces, 4 mm; only a screenshot of the result)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3828",
+ "why": "other area: 2D sketch offset of splines (sketch.offset), not a solid operation"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3850",
+ "why": "other area: booleans (cut whose end face touches a round side leaves an empty shell)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#3933",
+ "why": "needs the user's design; the refusal ('rim would have no thickness': round r2 tangent to the open face, shell 2 mm) is also the intended clean refusal"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4029",
+ "why": "not geometry: construction-plane attachment jumps to another face after editing the offset"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4052",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (0.1 mm shell of a chamfered and filleted part)"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4073",
+ "why": "empty report: no body, pick or error given"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4120",
+ "why": "needs the user's design (3-body design; the pick is not resolved: 'select at least one face')"
+ },
+ {
+ "source": "tangency-labs/solidcraft#4144",
+ "why": "needs the user's design (only the failing pick and error text are given); no synthetic geometry can be inferred (three faces, 2 mm; move larger than the wall)"
+ }
+]
\ No newline at end of file