SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 359/509: Kernel rig: flat DXF cases, outline, cut and bend line lengths, an ellipse exact and as arcs, and no sheet refused (and 1 more)
jyviko88aaf50bf178
diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/expected.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/expected.jsonnew file mode 100644index 0000000000..daa5ec2ff4--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/expected.json@@ -0,0 +1,23 @@+{+ "sources": [],+ "what": "sheet.export_dxf with curves: arcs of a 100 x 60 x 2 plate with a 20 x 12 elliptical cut-out: the ellipse becomes tangent arcs",+ "source": "analytic",+ "method": "curves: arcs writes the ellipse as tangent arcs and lines within 0.001 mm, for machines that read only those: on layer CUT no ELLIPSE and no SPLINE, and their length is the ellipse's perimeter 51.053998 (within 0.001 mm of the curve, the length to 1e-3 relative)",+ "body_count": 1,+ "files": [+ {+ "path": "flat.dxf",+ "dxf": {+ "CUT": {+ "ELLIPSE": 0,+ "SPLINE": 0,+ "length_mm": 51.053997725577524+ },+ "OUTLINE": {+ "LINE": 4,+ "length_mm": 320.0+ }+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/recipe.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/recipe.jsonnew file mode 100644index 0000000000..c8214a1adf--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-as-arcs/recipe.json@@ -0,0 +1,86 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 2",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Ellipse"+ }+ },+ {+ "command": "sketch.ellipse",+ "params": {+ "center": [+ 50,+ 30+ ],+ "major": [+ 60,+ 30+ ],+ "minor_radius": 6+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Ellipse",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "sheet.export_dxf",+ "params": {+ "path": "$OUT/flat.dxf",+ "curves": "arcs"+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/expected.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/expected.jsonnew file mode 100644index 0000000000..205363bbcf--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/expected.json@@ -0,0 +1,25 @@+{+ "sources": [],+ "what": "sheet.export_dxf of a 100 x 60 x 2 plate with a 20 x 12 elliptical cut-out, curves exact (the default): the cut-out is one ELLIPSE",+ "source": "analytic",+ "method": "the cut-out is an ellipse, semi-axes 10 and 6: written exactly, one ELLIPSE on layer CUT, no arcs or splines; its perimeter (Ramanujan's second formula, exact to 1e-9 here) 51.053998. OUTLINE: 4 lines, 320 long",+ "body_count": 1,+ "volume_mm3": 11623.008881569225,+ "files": [+ {+ "path": "flat.dxf",+ "dxf": {+ "CUT": {+ "ELLIPSE": 1,+ "ARC": 0,+ "SPLINE": 0,+ "length_mm": 51.053997725577524+ },+ "OUTLINE": {+ "LINE": 4,+ "length_mm": 320.0+ }+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/recipe.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/recipe.jsonnew file mode 100644index 0000000000..3893d9d564--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-ellipse-exact/recipe.json@@ -0,0 +1,85 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 2",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Ellipse"+ }+ },+ {+ "command": "sketch.ellipse",+ "params": {+ "center": [+ 50,+ 30+ ],+ "major": [+ 60,+ 30+ ],+ "minor_radius": 6+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Ellipse",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "sheet.export_dxf",+ "params": {+ "path": "$OUT/flat.dxf"+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/expected.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/expected.jsonnew file mode 100644index 0000000000..9680c74928--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/expected.json@@ -0,0 +1,41 @@+{+ "sources": [],+ "what": "sheet.export_dxf of an 80 x 40 x 2 base with a 20 mm flange on its y = 0 edge and a 10 mm hole: outline, cut and bend line",+ "source": "analytic",+ "method": "T = 2, R = 2, K = 0.5: flat = base 80 x (40 - 4) + bend zone BA = (pi/2)(R + K*T) = 4.712389 + leg 20 - 4 = 16: 80 x 56.712389. OUTLINE: its 4 sides (each may be split where the zone meets the panels: 4 to 8 lines), length 2*(80 + 56.712389); CUT: the hole, 1 circle, length 10*pi; BEND_UP: the flange's bend line (it bends up), 80 long; no BEND_DOWN, no arcs",+ "body_count": 1,+ "results": [+ {+ "step": 8,+ "json": {+ "bends": 1+ }+ }+ ],+ "files": [+ {+ "path": "flat.dxf",+ "dxf": {+ "OUTLINE": {+ "LINE": [+ 4,+ 8+ ],+ "ARC": 0,+ "length_mm": 273.42477796076935+ },+ "CUT": {+ "CIRCLE": 1,+ "length_mm": 31.41592653589793+ },+ "BEND_UP": {+ "length_mm": 80.0+ },+ "BEND_DOWN": {+ "LINE": 0,+ "LWPOLYLINE": 0+ }+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/recipe.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/recipe.jsonnew file mode 100644index 0000000000..7a1bfcbca6--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-flange-and-hole/recipe.json@@ -0,0 +1,81 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 2",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 80,+ 40+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 40,+ 0,+ 2+ ]+ ],+ "height": 20+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 40,+ 25,+ 0+ ],+ "direction": [+ 0,+ 0,+ 1+ ],+ "diameter": 10+ }+ },+ {+ "command": "sheet.export_dxf",+ "params": {+ "path": "$OUT/flat.dxf"+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/expected.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/expected.jsonnew file mode 100644index 0000000000..05ce3dcf47--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/expected.json@@ -0,0 +1,8 @@+{+ "sources": [],+ "what": "sheet.export_dxf in a design with a box and no sheet metal body",+ "source": "invariants",+ "method": "there is no flat pattern to write: a clean refusal that says how to start a sheet",+ "outcome": "refused",+ "refusal": "there is no sheet metal body"+}diff --git a/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/recipe.json b/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/recipe.jsonnew file mode 100644index 0000000000..d10795bfb7--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-export-dxf-without-a-sheet-refused/recipe.json@@ -0,0 +1,18 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 10,+ "height": 2+ }+ },+ {+ "command": "sheet.export_dxf",+ "params": {+ "path": "$OUT/flat.dxf"+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/expected.json b/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/expected.jsonnew file mode 100644index 0000000000..079f05b503--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/expected.json@@ -0,0 +1,20 @@+{+ "sources": [],+ "what": "sheet.perforate, a square field over a 40 x 20 x 1 base with a 10 mm flange on its x = 40 edge: no hole within the margin of the bend zone",+ "source": "analytic",+ "method": "T = 1, R = 1, K = 0.5: the flange sets the base back R + T = 2 (flat x 0..38), its bend zone is BA = (pi/2)(R + K*T) = 2.356194 wide (x 38..40.356194), its leg 10 - 2 = 8 (to x 48.356194). 1 mm holes, pitch 4, margin 1 (clear 1.5): rows y 1.5, 5.5, 9.5, 13.5, 17.5 (5); per row x 1.5, 5.5, ..., 45.5 (<= 46.8562) less those within 1.5 of the zone (37.5 and 41.5): 9 on the base, 1 on the flange (45.5): 50 holes",+ "body_count": 1,+ "results": [+ {+ "step": 8,+ "json": {+ "perforations": [+ {+ "count": 50,+ "pattern": "square"+ }+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/recipe.json b/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/recipe.jsonnew file mode 100644index 0000000000..6bb2a12470--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-keeps-clear-of-a-bend-zone/recipe.json@@ -0,0 +1,72 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 1",+ "thickness": "1 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 40,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 40,+ 10,+ 1+ ]+ ],+ "height": 10+ }+ },+ {+ "command": "sheet.perforate",+ "params": {+ "diameter": "1",+ "pitch": "4",+ "margin": "1",+ "pattern": "square"+ }+ },+ {+ "command": "sheet.flat_pattern",+ "params": {}+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/expected.json b/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/expected.jsonnew file mode 100644index 0000000000..279761d4fa--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/expected.json@@ -0,0 +1,8 @@+{+ "sources": [],+ "what": "sheet.perforate with a pitch equal to the hole's diameter: the holes would touch",+ "source": "invariants",+ "method": "holes 2 mm across at a 2 mm pitch leave no web between them; the documented rule is pitch > diameter, so the field is refused",+ "outcome": "refused",+ "refusal": "pitch > diameter"+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/recipe.json b/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/recipe.jsonnew file mode 100644index 0000000000..6fca887850--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-pitch-no-larger-than-the-hole-refused/recipe.json@@ -0,0 +1,53 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 1",+ "thickness": "1 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 30,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.perforate",+ "params": {+ "diameter": "2",+ "pitch": "2",+ "margin": "1"+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/expected.json b/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/expected.jsonnew file mode 100644index 0000000000..65b7970309--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/expected.json@@ -0,0 +1,26 @@+{+ "sources": [],+ "what": "sheet.perforate, a square field of 2 mm holes at 5 mm pitch, 1 mm margin, over a 30 x 20 x 1 plate",+ "source": "analytic",+ "method": "holes start at margin + radius = 2 from the flat's lower-left corner and step 5: x 2, 7, ..., 27 (6, each <= 30 - 2), y 2, 7, 12, 17 (4): 24 holes, open area 24*pi*1^2. The field is stored, not cut into the B-rep: the body stays the 30 x 20 x 1 plate, V = 600, 6 faces",+ "body_count": 1,+ "volume_mm3": 600.0,+ "faces": 6,+ "results": [+ {+ "step": 7,+ "json": {+ "perforations": [+ {+ "count": 24,+ "pattern": "square",+ "diameter": 2.0,+ "pitch": 5.0,+ "margin": 1.0,+ "open_area_mm2": 75.39822368615503+ }+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/recipe.json b/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/recipe.jsonnew file mode 100644index 0000000000..d0b798eaff--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-square-field-on-a-plate/recipe.json@@ -0,0 +1,58 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 1",+ "thickness": "1 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 30,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.perforate",+ "params": {+ "diameter": "2",+ "pitch": "5",+ "margin": "1",+ "pattern": "square"+ }+ },+ {+ "command": "sheet.flat_pattern",+ "params": {}+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/expected.json b/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/expected.jsonnew file mode 100644index 0000000000..c1eee3e7ec--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/expected.json@@ -0,0 +1,38 @@+{+ "sources": [],+ "what": "sheet.perforate, a staggered (60 degree) field of 1 mm holes at 3 mm pitch, 1 mm margin, over a 20 x 10 x 1 plate, exported to DXF",+ "source": "analytic",+ "method": "clear = radius + margin = 1.5; rows every 3*sqrt(3)/2 = 2.598 from y 1.5: y 1.5, 4.098, 6.696 (9.294 > 8.5); even rows x 1.5, 4.5, ..., 16.5 (6), the odd row shifted 1.5: x 3, ..., 18 (6): 18 holes. In the DXF, 18 circles on layer PERFORATION, length 18*pi*1; the plate's outline 4 lines, 60 long. The B-rep is not cut: V = 200",+ "body_count": 1,+ "volume_mm3": 200.0,+ "faces": 6,+ "results": [+ {+ "step": 7,+ "json": {+ "perforations": [+ {+ "count": 18,+ "pattern": "staggered",+ "open_area_mm2": 14.137166941154069+ }+ ]+ }+ }+ ],+ "files": [+ {+ "path": "flat.dxf",+ "dxf": {+ "PERFORATION": {+ "CIRCLE": 18,+ "length_mm": 56.548667764616276+ },+ "OUTLINE": {+ "LINE": 4,+ "length_mm": 60.0+ }+ }+ }+ ]+}diff --git a/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/recipe.json b/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/recipe.jsonnew file mode 100644index 0000000000..a2b02cd51d--- /dev/null+++ b/tests/kernel-cases/sheet-metal/cov-perforate-staggered-field-on-a-plate/recipe.json@@ -0,0 +1,63 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 1",+ "thickness": "1 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 20,+ 10+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.perforate",+ "params": {+ "diameter": "1",+ "pitch": "3",+ "margin": "1"+ }+ },+ {+ "command": "sheet.flat_pattern",+ "params": {}+ },+ {+ "command": "sheet.export_dxf",+ "params": {+ "path": "$OUT/flat.dxf"+ }+ }+ ]+}