SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 235/509: kernel-cases: #4830–#5197 triaged: 21 cases, 110 skipped
jyviko8e1005c82de9
diff --git a/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/expected.json b/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/expected.jsonnew file mode 100644index 0000000000..71a3a763e6--- /dev/null+++ b/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#4877",+ "tangency-labs/solidcraft#5413"+ ],+ "what": "a 0.6 mm pocket cut from the top of a tab joined to a disc with a chamfered bottom edge (the join fell back to truck's tool nudge, which lifted the tab's top by 5e-5 mm): the pocket never opened, it left a sealed void under a 0.00005 mm skin",+ "source": "analytic",+ "method": "disc r25 h10 less its 1 mm bottom chamfer ring (Pappus: pi*(25-1/3)) plus the tab 20x12x4 less their overlap: Int_0^4 of the tab rectangle's area inside the disc's radius at z (24+z below z = 1, 25 above) (python quadrature); minus the pocket 10x4x0.6 = 24, wholly in the tab outside the disc. One shell: the pocket opens through the tab's top",+ "body_count": 1,+ "shells": 1,+ "volume_mm3": 20403.0482+}diff --git a/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/recipe.json b/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/recipe.jsonnew file mode 100644index 0000000000..3c457d3302--- /dev/null+++ b/tests/kernel-cases/booleans/4877-pocket-on-tab-joined-to-chamfered-disc/recipe.json@@ -0,0 +1,79 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "diameter": 50,+ "height": 10,+ "body_name": "Disc"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 25,+ 0,+ 0+ ]+ ],+ "distance": 1+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 12,+ "height": 4,+ "corner": [+ 0,+ -34,+ 0+ ],+ "operation": "join",+ "targets": [+ "Disc"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Pocket",+ "offset": 4+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 5,+ -31+ ],+ "p1": [+ 15,+ -27+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Pocket",+ "distance": 0.6,+ "direction": "negative",+ "operation": "cut",+ "targets": [+ "Disc"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/expected.json b/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/expected.jsonnew file mode 100644index 0000000000..318d76655b--- /dev/null+++ b/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4879",+ "tangency-labs/solidcraft#4484"+ ],+ "what": "a symmetric through-all cut of a window across a thickened (2 mm) surface revolve of a control-point spline (100 deg about X): truck ran ~20 s to 'boolean Cut: no result' (or never finished)",+ "source": "invariants",+ "method": "the window (x -2..6, z 6..20, through all y) crosses the shell where it is near the XZ plane and leaves it joined round the rest of its 100 deg, so the result is one valid closed body. The spline shell has no closed-form volume",+ "body_count": 1+}diff --git a/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/recipe.json b/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/recipe.jsonnew file mode 100644index 0000000000..78e314f27b--- /dev/null+++ b/tests/kernel-cases/booleans/4879-cut-through-thickened-spline-revolve/recipe.json@@ -0,0 +1,138 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Profile"+ }+ },+ {+ "command": "sketch.spline.control_point",+ "params": {+ "points": [+ [+ -10,+ 8+ ],+ [+ -4,+ 12+ ],+ [+ 2,+ 9+ ],+ [+ 8,+ 13+ ],+ [+ 14,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.revolve",+ "params": {+ "sketch": "Profile",+ "curves": [+ "s1"+ ],+ "axis": "X",+ "angle": "100 deg"+ }+ },+ {+ "command": "surface.thicken",+ "params": {+ "bodies": [+ "Body1"+ ],+ "thickness": "2 mm",+ "operation": "new"+ }+ },+ {+ "command": "solid.remove",+ "params": {+ "bodies": [+ "Body1"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Window",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -2,+ 6+ ],+ "p1": [+ 6,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Window",+ "distance": 10,+ "direction": "symmetric",+ "through_all": true,+ "operation": "cut"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/expected.json b/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/expected.jsonnew file mode 100644index 0000000000..02c7c4915a--- /dev/null+++ b/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4927"+ ],+ "what": "a 5 mm slot cut end to end through one wall of a tube (r 20..30 x 100) whose top rims are chamfered (2.5 outside, 4 inside): the cut hung (moving the chamfers after the cut worked)",+ "source": "analytic",+ "method": "tube pi (30^2-20^2) 100 less the chamfer rings (Pappus: 2 pi (30 - 2.5/3) 2.5^2/2 and 2 pi (20 + 4/3) 4^2/2). The slot y -2.3..2.7, x > 0 through all removes Int_0^100 Int_-2.3^2.7 (sqrt(ro^2-y^2) - sqrt(ri^2-y^2)) dy dz, the radii following the chamfers near the top (python quadrature). The C-shaped tube is one body",+ "body_count": 1,+ "volume_mm3": 150481.462+}diff --git a/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/recipe.json b/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/recipe.jsonnew file mode 100644index 0000000000..f2d0eea5db--- /dev/null+++ b/tests/kernel-cases/booleans/4927-slot-cut-through-chamfered-tube-wall/recipe.json@@ -0,0 +1,114 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Tube"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Tube",+ "distance": 100,+ "profiles": [+ {+ "point": [+ 25,+ 0+ ]+ }+ ],+ "body_name": "Clamp"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 30,+ 0,+ 100+ ]+ ],+ "distance": 2.5+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 20,+ 0,+ 100+ ]+ ],+ "distance": 4+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Slot",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 15,+ -2.3+ ],+ "p1": [+ 35,+ 2.7+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Slot",+ "distance": 100,+ "through_all": true,+ "operation": "cut",+ "targets": [+ "Clamp"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/expected.json b/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/expected.jsonnew file mode 100644index 0000000000..7776c0508f--- /dev/null+++ b/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#5024"+ ],+ "what": "a drilled O8 hole, 10 deep with a 118 deg point, placed 1 mm off a 40x30x20 box's top face, across its edge: 17-54 s in truck",+ "source": "analytic",+ "method": "the hole's axis is at x = -1, y = 15, so only its part at x >= 0 removes material: the circular segment of the O8 section beyond x = 0 (r^2 acos(d/r) - d sqrt(r^2-d^2), d = 1) over the 10 mm to the shoulder, plus the same segment of the point cone's section (radius 4 - s tan59 at s below the shoulder, down to radius 1), integrated (python quadrature). V = 24000 - 172.16874 - 11.10370",+ "body_count": 1,+ "volume_mm3": 23816.7276+}diff --git a/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/recipe.json b/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/recipe.jsonnew file mode 100644index 0000000000..9718779505--- /dev/null+++ b/tests/kernel-cases/booleans/5024-drilled-hole-across-box-edge/recipe.json@@ -0,0 +1,26 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 30,+ "height": 20+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ -1,+ 15,+ 20+ ],+ "diameter": 8,+ "depth": 10,+ "type": "drilled",+ "tip_angle": 118+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/expected.json b/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/expected.jsonnew file mode 100644index 0000000000..a50478ef64--- /dev/null+++ b/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#5041"+ ],+ "what": "a countersunk O6.4 hole (O13.7, 90 deg) through a plate 0.15 mm from a wall standing on it: the countersink tool reached ~0.7 mm above the entry face and notched the wall",+ "source": "analytic",+ "method": "the countersink's rim (y = 23 + 6.85 = 29.85) stays clear of the wall (y = 30), so nothing above z = 8 changes. Plate 40x40x8 + wall 40x10x30 = 24800; the hole removes the O6.4 cylinder through 8 plus the countersink cone over it (depth (13.7-6.4)/2 = 3.65: pi h/3 (R^2+Rr+r^2) - pi r^2 h). Faces: bottom, the two L-shaped x faces, y=0, y=40 (plate and wall coplanar), the plate top, the wall's -y face and top, the cone and the bore = 10. Area: 7480 - pi 6.85^2 - pi 3.2^2 + pi (6.85+3.2) 3.65 sqrt2 + 2 pi 3.2 (8-3.65). The report's clearance M6 is given as its O6.4 so the answer doesn't depend on the clearance table",+ "body_count": 1,+ "faces": 10,+ "volume_mm3": 24357.7861,+ "area_mm2": 7550.8567+}diff --git a/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/recipe.json b/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/recipe.jsonnew file mode 100644index 0000000000..70cbb9c4c6--- /dev/null+++ b/tests/kernel-cases/booleans/5041-countersink-beside-wall-stays-below-face/recipe.json@@ -0,0 +1,53 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 40,+ "height": 8,+ "corner": [+ 0,+ 0,+ 0+ ],+ "name": "Plate"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 10,+ "height": 30,+ "corner": [+ 0,+ 30,+ 8+ ],+ "operation": "join",+ "name": "Wall"+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 20,+ 23.0,+ 8+ ],+ "direction": [+ 0,+ 0,+ -1+ ],+ "diameter": 6.4,+ "type": "countersink",+ "cs_diameter": 13.7,+ "cs_angle": 90,+ "name": "CS"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/expected.json b/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/expected.jsonnew file mode 100644index 0000000000..da3a9532b2--- /dev/null+++ b/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#5126"+ ],+ "what": "a join of the 20 level-2 Menger sponges (45 mm, 5 mm cubes) of a level-3 sponge, touching face to face with the same hole pattern on both faces of each contact: truck failed depending on the tools' order ('coincident faces were left in place', 'shell not oriented and closed')",+ "source": "analytic",+ "method": "each level-2 sponge is a 45 mm cube less its 3 central 15 mm tunnels and the 24 5 mm tunnels of its sub-cubes: 45^3 * (20/27)^2 = 50000. The 20 sponges of level 3 touch only face to face, so the join is one body of 20 * 50000 = 1000000 (= 135^3 * (20/27)^3). The tools are listed round the bottom ring first, then the rest, as in the failing session",+ "body_count": 1,+ "volume_mm3": 1000000.0,+ "timeout_s": 1200+}diff --git a/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/recipe.json b/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/recipe.jsonnew file mode 100644index 0000000000..f9e976c767--- /dev/null+++ b/tests/kernel-cases/booleans/5126-join-menger-sponge-level-3/recipe.json@@ -0,0 +1,9492 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S000"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 15.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ -1,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 15.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S000"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 45+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S001"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 15.0,+ 60.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ -1,+ 60.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 15.0,+ 44+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 20.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 20.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S001"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S002"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 15.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 5.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 20.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 35.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ -1,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 15.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S002"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 45,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S010"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 60.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 65.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 65.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 44,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 60.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 65.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 65.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S010"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 45,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S012"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 60.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 50.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 65.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 65.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 80.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 44,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 60.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 65.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 65.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S012"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 90,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S020"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 105.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 89,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 105.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S020"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 90,+ 45+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S021"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 105.0,+ 60.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 89,+ 60.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 105.0,+ 44+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 110.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 110.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S021"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 90,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S022"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 105.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 95.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 110.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -1,+ 125.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 89,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 15.0,+ 105.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 5.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 20.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 35.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S022"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 45,+ 0,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S100"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 15.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 20.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 20.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ -1,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 15.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S100"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 45,+ 0,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S102"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 15.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 5.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 20.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 20.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 35.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ -1,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 15.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S102"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 45,+ 90,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S120"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 105.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 110.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 110.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 89,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 105.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S120"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 45,+ 90,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S122"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 105.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 95.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 110.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 110.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 44,+ 125.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 89,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 60.0,+ 105.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 50.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 65.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 80.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S122"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 0,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S200"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 15.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ -1,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 15.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 5.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 20.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 35.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S200"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 0,+ 45+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S201"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 15.0,+ 60.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ -1,+ 60.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 15.0,+ 44+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 20.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 5.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 20.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 35.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S201"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 0,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S202"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 15.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 5.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 20.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 35.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ -1,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ -1,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 15.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 5.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 20.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 35.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S202"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 45,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S210"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 60.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 65.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 65.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 44,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 60.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 65.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 50.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 65.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 80.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S210"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 45,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S212"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 60.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 50.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 65.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 65.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 80.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 44,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 44,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 60.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 65.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 50.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 65.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 80.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S212"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 90,+ 0+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S220"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 105.0,+ 15.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 5.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 20.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 35.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 89,+ 15.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 5.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 20.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 35.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 105.0,+ -1+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 95.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 110.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 125.0,+ -1+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S220"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 90,+ 45+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S221"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 105.0,+ 60.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 50.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 65.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 80.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 89,+ 60.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 50.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 65.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 80.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 105.0,+ 44+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 110.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 95.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 110.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 125.0,+ 44+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S221"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 90,+ 90+ ],+ "length": 45,+ "width": 45,+ "height": 45,+ "body_name": "S222"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 105.0,+ 105.0+ ],+ "length": 47,+ "width": 15,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 95.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 110.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 95.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 110.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 89,+ 125.0,+ 125.0+ ],+ "length": 47,+ "width": 5,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 89,+ 105.0+ ],+ "length": 15,+ "width": 47,+ "height": 15,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 95.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 110.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 89,+ 125.0+ ],+ "length": 5,+ "width": 47,+ "height": 5,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 105.0,+ 105.0,+ 89+ ],+ "length": 15,+ "width": 15,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 95.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 110.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 95.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 110.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 125.0,+ 125.0,+ 89+ ],+ "length": 5,+ "width": 5,+ "height": 47,+ "operation": "cut",+ "targets": [+ "S222"+ ]+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "S000",+ "tools": [+ "S100",+ "S200",+ "S210",+ "S220",+ "S120",+ "S020",+ "S010",+ "S001",+ "S002",+ "S012",+ "S021",+ "S022",+ "S102",+ "S122",+ "S201",+ "S202",+ "S212",+ "S221",+ "S222"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/expected.json b/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/expected.jsonnew file mode 100644index 0000000000..7d6015e877--- /dev/null+++ b/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#5149"+ ],+ "what": "a 25x2x10 fin standing on a disc plate, circular-patterned 40 times about the plate's axis (joined): 'boolean Union: no result' past about 15 copies",+ "source": "analytic",+ "method": "fins r 20..45, 2 wide: at r = 20 the 40 copies are 2 pi 20/40 = 3.14 apart, wider than a fin, so none overlap. V = pi 50^2 5 + 40*25*2*10 = 39269.908 + 20000. Faces: the plate's bottom, side and top + 5 per fin = 203",+ "body_count": 1,+ "faces": 203,+ "volume_mm3": 59269.9082+}diff --git a/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/recipe.json b/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/recipe.jsonnew file mode 100644index 0000000000..a01536d109--- /dev/null+++ b/tests/kernel-cases/booleans/5149-circular-pattern-of-40-fins-joined-to-plate/recipe.json@@ -0,0 +1,66 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 50,+ "height": 5,+ "body_name": "Plate"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "face": [+ 0,+ 0,+ 5+ ]+ },+ "name": "FinSketch",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20,+ -1+ ],+ "p1": [+ 45,+ 1+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "FinSketch",+ "distance": 10,+ "operation": "join",+ "targets": [+ "Plate"+ ],+ "name": "Fin"+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "Fin"+ ],+ "axis": "Z",+ "count": 40,+ "angle": "360 deg"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/5197-join-flush-chord-layers/expected.json b/tests/kernel-cases/booleans/5197-join-flush-chord-layers/expected.jsonnew file mode 100644index 0000000000..7a99b89cd1--- /dev/null+++ b/tests/kernel-cases/booleans/5197-join-flush-chord-layers/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#5197",+ "tangency-labs/solidcraft#3396"+ ],+ "what": "a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid",+ "source": "analytic",+ "method": "the layers only meet face to face, so V is their sum: Body1 = pi 37^2 1.2 + (pi 37^2 - the four bands y -29..-24, -13..-8, 8..11, 24..27 of the disc, Int 2 sqrt(37^2 - y^2) dy) 2.4; Body2 = pi (37^2-35^2) 2; Body3 = pi 37^2 2.4. The bands run out to the rim, so the space inside r35 under Body1 opens to the outside: one shell (the reporter's 52-command script, generic dimensions)",+ "body_count": 1,+ "shells": 1,+ "volume_mm3": 24340.9358+}diff --git a/tests/kernel-cases/booleans/5197-join-flush-chord-layers/recipe.json b/tests/kernel-cases/booleans/5197-join-flush-chord-layers/recipe.jsonnew file mode 100644index 0000000000..246440cc44--- /dev/null+++ b/tests/kernel-cases/booleans/5197-join-flush-chord-layers/recipe.json@@ -0,0 +1,792 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "S1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ -32+ ],+ [+ 18.57417562100671,+ -32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -22.978250586152114,+ -29+ ],+ [+ 22.978250586152114,+ -29+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ -24+ ],+ [+ 28.160255680657446,+ -24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -30.463092423455635,+ -21+ ],+ [+ 30.463092423455635,+ -21+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ -16+ ],+ [+ 33.36165463522455,+ -16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -34.64101615137755,+ -13+ ],+ [+ 34.64101615137755,+ -13+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ -8+ ],+ [+ 36.124783736376884,+ -8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.66060555964672,+ -5+ ],+ [+ 36.66060555964672,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -37.0,+ 0+ ],+ [+ 37.0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.87817782917155,+ 3+ ],+ [+ 36.87817782917155,+ 3+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ 8+ ],+ [+ 36.124783736376884,+ 8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -35.32704346531139,+ 11+ ],+ [+ 35.32704346531139,+ 11+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ 16+ ],+ [+ 33.36165463522455,+ 16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -31.74901573277509,+ 19+ ],+ [+ 31.74901573277509,+ 19+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ 24+ ],+ [+ 28.160255680657446,+ 24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -25.298221281347036,+ 27+ ],+ [+ 25.298221281347036,+ 27+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ 32+ ],+ [+ 18.57417562100671,+ 32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -12.0,+ 35+ ],+ [+ 12.0,+ 35+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "S3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ -32+ ],+ [+ 18.57417562100671,+ -32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -22.978250586152114,+ -29+ ],+ [+ 22.978250586152114,+ -29+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ -24+ ],+ [+ 28.160255680657446,+ -24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -30.463092423455635,+ -21+ ],+ [+ 30.463092423455635,+ -21+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ -16+ ],+ [+ 33.36165463522455,+ -16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -34.64101615137755,+ -13+ ],+ [+ 34.64101615137755,+ -13+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ -8+ ],+ [+ 36.124783736376884,+ -8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.66060555964672,+ -5+ ],+ [+ 36.66060555964672,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -37.0,+ 0+ ],+ [+ 37.0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.87817782917155,+ 3+ ],+ [+ 36.87817782917155,+ 3+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ 8+ ],+ [+ 36.124783736376884,+ 8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -35.32704346531139,+ 11+ ],+ [+ 35.32704346531139,+ 11+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ 16+ ],+ [+ 33.36165463522455,+ 16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -31.74901573277509,+ 19+ ],+ [+ 31.74901573277509,+ 19+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ 24+ ],+ [+ 28.160255680657446,+ 24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -25.298221281347036,+ 27+ ],+ [+ 25.298221281347036,+ 27+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ 32+ ],+ [+ 18.57417562100671,+ 32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -12.0,+ 35+ ],+ [+ 12.0,+ 35+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Rings"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 35+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Rings",+ "profiles": "all",+ "distance": 1.2,+ "direction": "negative",+ "body_name": "Body1"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "S1",+ "profiles": [+ {+ "point": [+ 0,+ -34.5+ ]+ },+ {+ "point": [+ 0,+ -30.5+ ]+ },+ {+ "point": [+ 0,+ -22.5+ ]+ },+ {+ "point": [+ 0,+ -18.5+ ]+ },+ {+ "point": [+ 0,+ -14.5+ ]+ },+ {+ "point": [+ 0,+ -6.5+ ]+ },+ {+ "point": [+ 0,+ -2.5+ ]+ },+ {+ "point": [+ 0,+ 1.5+ ]+ },+ {+ "point": [+ 0,+ 5.5+ ]+ },+ {+ "point": [+ 0,+ 13.5+ ]+ },+ {+ "point": [+ 0,+ 17.5+ ]+ },+ {+ "point": [+ 0,+ 21.5+ ]+ },+ {+ "point": [+ 0,+ 29.5+ ]+ },+ {+ "point": [+ 0,+ 33.5+ ]+ },+ {+ "point": [+ 0,+ 36.0+ ]+ }+ ],+ "distance": 2.4,+ "direction": "negative",+ "from": [+ 0,+ 0,+ -1.2+ ],+ "operation": "join"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Rings",+ "profiles": [+ {+ "point": [+ 36,+ 0+ ]+ }+ ],+ "distance": 2,+ "direction": "negative",+ "from": [+ 36,+ 0,+ -3.6+ ],+ "operation": "new",+ "body_name": "Body2"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "S3",+ "profiles": "all",+ "distance": 2.4,+ "direction": "negative",+ "from": [+ 36,+ 0,+ -5.6+ ],+ "operation": "new",+ "body_name": "Body3"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Body2",+ "tools": [+ "Body3"+ ],+ "operation": "join"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Body1",+ "tools": [+ "Body2"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/skipped-4161.json b/tests/kernel-cases/booleans/skipped-4161.jsonindex b6e886ec7f..0052fb2d3d 100644--- a/tests/kernel-cases/booleans/skipped-4161.json+++ b/tests/kernel-cases/booleans/skipped-4161.json@@ -390,5 +390,193 @@{"source": "tangency-labs/solidcraft#4827","why": "UI only: draft corner rules in the dialog (feature request)"+ },+ {+ "source": "tangency-labs/solidcraft#4831",+ "why": "no geometry: sketch Mirror about an origin axis (dup of #4193)"+ },+ {+ "source": "tangency-labs/solidcraft#4852",+ "why": "no reproduction: a screw-hole cut in a user's part shown by screenshot; the design is off GitHub"+ },+ {+ "source": "tangency-labs/solidcraft#4853",+ "why": "no geometry: sketch edits on a turned component are slow (evaluation frames)"+ },+ {+ "source": "tangency-labs/solidcraft#4856",+ "why": "no geometry: an M2 thread in a 2 mm hole is refused by design (tap drill 1.6)"+ },+ {+ "source": "tangency-labs/solidcraft#4862",+ "why": "UI only: sketch-on-face contrast"+ },+ {+ "source": "tangency-labs/solidcraft#4865",+ "why": "no geometry: sketch Mirror about an origin axis (dup of #4193)"+ },+ {+ "source": "tangency-labs/solidcraft#4881",+ "why": "no reproduction: an extrude to an imported STEP made from a mesh in another CAD program, no file"+ },+ {+ "source": "tangency-labs/solidcraft#4883",+ "why": "no reproduction: \"couldn't extrude after a loft and patch\", no message or design"+ },+ {+ "source": "tangency-labs/solidcraft#4885",+ "why": "UI only: positioning a hole while placing it (dup of #4384)"+ },+ {+ "source": "tangency-labs/solidcraft#4910",+ "why": "no geometry: the report arrived empty"+ },+ {+ "source": "tangency-labs/solidcraft#4911",+ "why": "no geometry: a join to-object where a cut was meant (\"nothing lies between\"), user error"+ },+ {+ "source": "tangency-labs/solidcraft#4917",+ "why": "no reproduction: an extrude to a curved face on an unknown part, screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#4921",+ "why": "no reproduction: a 0.6 mm join on a 44-feature user part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#4922",+ "why": "UI only: theme corner radii"+ },+ {+ "source": "tangency-labs/solidcraft#4928",+ "why": "no geometry: plugin commands (RFC)"+ },+ {+ "source": "tangency-labs/solidcraft#4937",+ "why": "no geometry: a Mirror feature can't itself be mirrored yet (a stated limit, dup of #395)"+ },+ {+ "source": "tangency-labs/solidcraft#4943",+ "why": "no reproduction: last command only (a 4 mm cut of two profiles), no design"+ },+ {+ "source": "tangency-labs/solidcraft#4945",+ "why": "no reproduction: last command only (a 10 mm join), no message or design"+ },+ {+ "source": "tangency-labs/solidcraft#4955",+ "why": "UI only: moving a placed hole (dup of #5399)"+ },+ {+ "source": "tangency-labs/solidcraft#4957",+ "why": "no geometry: body auto-names reused after a rename (document)"+ },+ {+ "source": "tangency-labs/solidcraft#4967",+ "why": "UI only: sketch snap to curve intersections"+ },+ {+ "source": "tangency-labs/solidcraft#4974",+ "why": "UI only: a construction plane can't be picked as an extrude's To Object (the command takes it)"+ },+ {+ "source": "tangency-labs/solidcraft#5002",+ "why": "no reproduction: Split Body by an offset plane leaving touching lumps, a user's roof part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#5032",+ "why": "no geometry: sketch mirror lines not offered after the sketch is finished (UI)"+ },+ {+ "source": "tangency-labs/solidcraft#5039",+ "why": "no reproduction: a cylinder joined on a user's swept body; the design was mailed, not attached"+ },+ {+ "source": "tangency-labs/solidcraft#5040",+ "why": "no geometry: an offset plane can't attach to a face after a draft and a shell (document, dup of #4325)"+ },+ {+ "source": "tangency-labs/solidcraft#5044",+ "why": "no reproduction: Draft pick point misses the face on a user's 3-body part"+ },+ {+ "source": "tangency-labs/solidcraft#5066",+ "why": "no geometry: sketch pattern counts lose their parameter (sketch, dup of #5231)"+ },+ {+ "source": "tangency-labs/solidcraft#5072",+ "why": "no reproduction: last command only (a 2 mm cut on 0.16.2), no design"+ },+ {+ "source": "tangency-labs/solidcraft#5073",+ "why": "no reproduction: a slow join of two bodies of a user's part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#5075",+ "why": "no geometry: a cut into a mesh body is refused by design (the part was opened from STL)"+ },+ {+ "source": "tangency-labs/solidcraft#5078",+ "why": "UI only: the Parameters window's size"+ },+ {+ "source": "tangency-labs/solidcraft#5080",+ "why": "UI only: reordering ribbon drop-downs"+ },+ {+ "source": "tangency-labs/solidcraft#5082",+ "why": "UI only: Combine's body inputs not filling (screenshot)"+ },+ {+ "source": "tangency-labs/solidcraft#5089",+ "why": "no geometry: render settings validation"+ },+ {+ "source": "tangency-labs/solidcraft#5106",+ "why": "no reproduction: four circles cut into a user's cylinder at once compute for long, no sizes"+ },+ {+ "source": "tangency-labs/solidcraft#5111",+ "why": "render: Direct3D 12 glitches on a GTX 1060"+ },+ {+ "source": "tangency-labs/solidcraft#5123",+ "why": "no reproduction: a 5 mm join that never finishes on a user's part, screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#5135",+ "why": "no geometry: a construction axis as the pattern axis (command parameters, fixed in 0.20.0)"+ },+ {+ "source": "tangency-labs/solidcraft#5136",+ "why": "no reproduction: Split Body of a user's profile part by a plane, no design"+ },+ {+ "source": "tangency-labs/solidcraft#5142",+ "why": "UI only: Combine doesn't take bodies picked in the browser (dup of #4452)"+ },+ {+ "source": "tangency-labs/solidcraft#5156",+ "why": "no reproduction: a screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#5171",+ "why": "no reproduction: last command only (a 26 mm cut on a 56-feature part), no design"+ },+ {+ "source": "tangency-labs/solidcraft#5172",+ "why": "no kernel geometry: extrude without profiles takes every region, islands included (command default)"+ },+ {+ "source": "tangency-labs/solidcraft#5175",+ "why": "no geometry: a joint origin's name given as a face (document)"+ },+ {+ "source": "tangency-labs/solidcraft#5180",+ "why": "no reproduction: a cut on a user's 20 m model never finishes, screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#5185",+ "why": "no geometry: joint solver work while dragging (performance)"}]diff --git a/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/expected.json b/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/expected.jsonnew file mode 100644index 0000000000..ee3244f8f1--- /dev/null+++ b/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/expected.json@@ -0,0 +1,9 @@+{+ "sources": [+ "tangency-labs/solidcraft#5022"+ ],+ "what": "a snap fit 1e-9 mm thick on a box: it got past validation and panicked in the kernel ('tolerance must be no less than 1e-6')",+ "source": "invariants",+ "method": "a 1e-9 mm wall is no solid: the right answer is a clean refusal, never a panic",+ "outcome": "refused"+}diff --git a/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/recipe.json b/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/recipe.jsonnew file mode 100644index 0000000000..b4b9c6deab--- /dev/null+++ b/tests/kernel-cases/crashes/5022-snap-fit-near-zero-thickness/recipe.json@@ -0,0 +1,32 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 40,+ "height": 4+ }+ },+ {+ "command": "plastic.snap_fit",+ "params": {+ "position": [+ 20,+ 20,+ 4+ ],+ "hook": [+ 1,+ 0,+ 0+ ],+ "length": 15,+ "thickness": 1e-09,+ "width": 6,+ "catch_depth": 1,+ "catch_length": 3+ }+ }+ ]+}diff --git a/tests/kernel-cases/crashes/skipped-4161.json b/tests/kernel-cases/crashes/skipped-4161.jsonindex c5e6296ddb..a10915c7d8 100644--- a/tests/kernel-cases/crashes/skipped-4161.json+++ b/tests/kernel-cases/crashes/skipped-4161.json@@ -126,5 +126,93 @@{"source": "tangency-labs/solidcraft#4791","why": "render: capture buffer and GPU hang on Intel/Mesa, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4840",+ "why": "no geometry: unclean exit on 0.15.0, gone on 0.19.0"+ },+ {+ "source": "tangency-labs/solidcraft#4845",+ "why": "no reproduction: inspect.clearance between two user bodies, the design is not given"+ },+ {+ "source": "tangency-labs/solidcraft#4892",+ "why": "no geometry: drawing references and updates (feature plan)"+ },+ {+ "source": "tangency-labs/solidcraft#4931",+ "why": "no geometry: unclean exit on 0.12.0 after selections"+ },+ {+ "source": "tangency-labs/solidcraft#4944",+ "why": "no reproduction: timeline.edit of a bore in a user's design, the design is not given"+ },+ {+ "source": "tangency-labs/solidcraft#4951",+ "why": "no geometry: an empty crash report"+ },+ {+ "source": "tangency-labs/solidcraft#4958",+ "why": "render: lost GPU device (wgpu), no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4975",+ "why": "no geometry: an empty crash report (inspect.interference)"+ },+ {+ "source": "tangency-labs/solidcraft#4981",+ "why": "render: startup on the software fallback renderer, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4993",+ "why": "no geometry: unclean exit between commands, no replay"+ },+ {+ "source": "tangency-labs/solidcraft#5018",+ "why": "no reproduction: unclean exit during a fillet on 0.16.2, nothing recorded"+ },+ {+ "source": "tangency-labs/solidcraft#5021",+ "why": "no geometry: a design file's integer coordinates skip the load range check (document)"+ },+ {+ "source": "tangency-labs/solidcraft#5049",+ "why": "render: GPU tessellation buffer padding (an empty vertex list), not the kernel; the STEP file can't be shared"+ },+ {+ "source": "tangency-labs/solidcraft#5065",+ "why": "no geometry: unclean exit after a timeline delete, nothing running"+ },+ {+ "source": "tangency-labs/solidcraft#5068",+ "why": "no reproduction: the display triangulation library's assertion, title only"+ },+ {+ "source": "tangency-labs/solidcraft#5069",+ "why": "no reproduction: the display triangulation library's collinear-edge assertion, title only"+ },+ {+ "source": "tangency-labs/solidcraft#5079",+ "why": "no geometry: the crash journal leaves out component.activate (document)"+ },+ {+ "source": "tangency-labs/solidcraft#5102",+ "why": "no geometry: an empty crash report during startup (surface configure)"+ },+ {+ "source": "tangency-labs/solidcraft#5122",+ "why": "no reproduction: an access violation between commands, title only"+ },+ {+ "source": "tangency-labs/solidcraft#5125",+ "why": "no geometry: unclean exit with no command and no replay"+ },+ {+ "source": "tangency-labs/solidcraft#5144",+ "why": "render: lost GPU device (wgpu), no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#5189",+ "why": "render: lost GPU device (wgpu) in Preferences and the viewport"}]diff --git a/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/expected.json b/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/expected.jsonnew file mode 100644index 0000000000..a31fa8c8b7--- /dev/null+++ b/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#4859"+ ],+ "what": "an inside (concave) vertical corner of a 25x15 ring with a 2 mm wall, 10 high, chamfered 2 mm: truck refused it ('2 mm is too large for this chamfer: the result changes 108 mm3')",+ "source": "analytic",+ "method": "a chamfer of a concave edge fills it: + 2*2/2 * 10 = 20. V = (25*15 - 21*11)*10 + 20 = 1460. Faces: 4 outer, 4 inner, the chamfer, top, bottom = 11",+ "body_count": 1,+ "faces": 11,+ "volume_mm3": 1460.0+}diff --git a/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/recipe.json b/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/recipe.jsonnew file mode 100644index 0000000000..1c7f9a8d62--- /dev/null+++ b/tests/kernel-cases/fillets/4859-chamfer-inside-corner-of-thin-wall-ring/recipe.json@@ -0,0 +1,67 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 25,+ 15+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 2,+ 2+ ],+ "p1": [+ 23,+ 13+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "profiles": [+ {+ "point": [+ 1,+ 7+ ]+ }+ ]+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 2,+ 2,+ 5+ ]+ ],+ "distance": 2+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/expected.json b/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/expected.jsonnew file mode 100644index 0000000000..41dc60b02f--- /dev/null+++ b/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#4989"+ ],+ "what": "the top edge of a face drafted 10 deg (the front of a 40x30x20 block, neutral plane at its base), chamfered 2 mm: refused ('the blend is larger than the neighbouring faces; the largest radius that fits is 0.071 mm')",+ "source": "analytic",+ "method": "the draft tilts the front face in by 20 tan10 at the top: - 0.5*20*(20 tan10)*40. The edge between the top and the drafted face has an 80 deg wedge; an equal 2 mm chamfer removes the triangle 0.5*2*2*sin80 along its 40 mm (the end faces are square to it). Faces 7",+ "body_count": 1,+ "faces": 7,+ "volume_mm3": 22510.5995+}diff --git a/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/recipe.json b/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/recipe.jsonnew file mode 100644index 0000000000..abbbba334e--- /dev/null+++ b/tests/kernel-cases/fillets/4989-chamfer-top-edge-of-drafted-face/recipe.json@@ -0,0 +1,45 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 40,+ "width": 30,+ "height": 20,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.draft",+ "params": {+ "faces": [+ [+ 20,+ 0,+ 10+ ]+ ],+ "angle": "10 deg",+ "neutral": "XY"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 20,+ 3.52654,+ 20+ ]+ ],+ "distance": 2+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/expected.json b/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/expected.jsonnew file mode 100644index 0000000000..b64754dd2a--- /dev/null+++ b/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/expected.json@@ -0,0 +1,13 @@+{+ "sources": [+ "tangency-labs/solidcraft#5129"+ ],+ "what": "the concave vertical edge where a taller cylinder (r8 x 15) meets a block's side (10 high), filleted r1: refused ('a vertex of the edge chain where other faces meet: both faces next to the edge must be planar'); it worked when both were the same height",+ "source": "analytic",+ "method": "block 20x20x10 + cylinder pi 64 15 less their overlap (half the cylinder over the block's height, pi 64/2 10). The round fills the corner between the plane x = 20 and the cylinder: its circle (r1) has its centre at (21, 10 - sqrt80), tangent to both; the region between the plane, the cylinder and that circle (polygon clipping, 8192 segments a quarter circle) times the edge's 10 mm, the block's top closing it. Graded to 1e-5 relative, as the round adds 3e-4",+ "body_count": 1,+ "volume_mm3": 6012.41426,+ "tolerance": {+ "rel": 1e-05+ }+}diff --git a/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/recipe.json b/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/recipe.jsonnew file mode 100644index 0000000000..0722750eec--- /dev/null+++ b/tests/kernel-cases/fillets/5129-fillet-concave-edge-where-cylinder-meets-block/recipe.json@@ -0,0 +1,47 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 20,+ "width": 20,+ "height": 10,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 8,+ "height": 15,+ "base": [+ 20,+ 10,+ 0+ ],+ "operation": "join",+ "targets": [+ "Block"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 20,+ 2,+ 5+ ]+ ],+ "radius": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/expected.json b/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/expected.jsonnew file mode 100644index 0000000000..23c05bf403--- /dev/null+++ b/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#5157"+ ],+ "what": "the bottom loop of a 30x20x10 box whose vertical edges are rounded r4, chamfered 1 mm along its tangent chain: truck's corners bulged out instead of following the chamfer",+ "source": "analytic",+ "method": "rounds: 4 (1-pi/4) 16 10; the chamfer: its 1x1 triangle (area 1/2) along the straight runs (2*22 + 2*12 = 68) and, round each r4 corner, a quarter turn of it about the corner's axis (Pappus, centroid at radius 4 - 1/3): 4 (pi/2)(11/3)(1/2). V = 6000 - rounds - 34 - corners. Faces: top, bottom, 4 sides, 4 rounds, 4 flat and 4 conical chamfer pieces = 18",+ "body_count": 1,+ "faces": 18,+ "volume_mm3": 5817.1357+}diff --git a/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/recipe.json b/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/recipe.jsonnew file mode 100644index 0000000000..6f6577bcc9--- /dev/null+++ b/tests/kernel-cases/fillets/5157-chamfer-bottom-loop-of-box-with-rounded-corners/recipe.json@@ -0,0 +1,59 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -15,+ -10,+ 0+ ],+ "length": 30,+ "width": 20,+ "height": 10,+ "body_name": "Box"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 15,+ 10,+ 5+ ],+ [+ 15,+ -10,+ 5+ ],+ [+ -15,+ 10,+ 5+ ],+ [+ -15,+ -10,+ 5+ ]+ ],+ "radius": 4+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ -10,+ 0+ ]+ ],+ "distance": 1+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/expected.json b/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/expected.jsonnew file mode 100644index 0000000000..b9cd147aad--- /dev/null+++ b/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/expected.json@@ -0,0 +1,13 @@+{+ "sources": [+ "tangency-labs/solidcraft#5158"+ ],+ "what": "two adjacent top edges of a 2 mm plate (30x31, two O6.35 holes) filleted r2, the plate's own thickness; one hole comes within 1 mm of an edge: refused ('a fillet larger than the faces next to it; the largest radius that fits is 0.963 mm')",+ "source": "analytic",+ "method": "each round (r = t = 2) removes the corner region (1-pi/4) r^2 along its edge (30 and 31) and uses up the side face; at the corner the two mitred rounds overlap by Int_0^r L(b)^2 db, L(b) = r - sqrt(r^2-(b-r)^2); the round at x = -15 reaches the hole at (-10.8, 8.2), which already took out Int over the hole's part at x < -13 of 2 - sqrt(4 - (x+13)^2) (python quadrature). V = 1860 - 2 pi 3.175^2 2 - removed. Graded to 1e-5",+ "body_count": 1,+ "volume_mm3": 1681.90376,+ "tolerance": {+ "rel": 1e-05+ }+}diff --git a/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/recipe.json b/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/recipe.jsonnew file mode 100644index 0000000000..5689e99112--- /dev/null+++ b/tests/kernel-cases/fillets/5158-fillet-adjacent-plate-edges-as-thick-as-plate/recipe.json@@ -0,0 +1,100 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Plate"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -15,+ -15.5+ ],+ "p1": [+ 15,+ 15.5+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Plate",+ "distance": 2+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "face": [+ 0,+ 0,+ 2+ ]+ },+ "name": "Holes",+ "project_edges": false+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ -10.8,+ 8.2+ ],+ "radius": 3.175+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 3.2,+ 6.4+ ],+ "radius": 3.175+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Holes",+ "distance": 7.5,+ "direction": "negative",+ "operation": "cut"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 0,+ 15.5,+ 2+ ],+ [+ -15,+ 0,+ 2+ ]+ ],+ "radius": 2+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/expected.json b/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/expected.jsonnew file mode 100644index 0000000000..246a969e63--- /dev/null+++ b/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#5181"+ ],+ "what": "a 220 x 11 two-distance chamfer along the bottom edge of a 23 mm plate 100 wide whose sides run straight for 85 mm and then taper to 61.4 at 222.5: refused ('runs past the faces beside the edge into other geometry; the largest size that fits is 85 mm')",+ "source": "analytic",+ "method": "the plate (profile 100x85 + the trapezoid to 61.351 at 222.5) x 23. The first face is the big face (it faces up most: horizontal, the bottom faces down): 220 up it, 11 into the bottom face. The chamfer plane cuts the wedge 11 (1 - z/220) deep across the full width w(z) (100, then tapering past z = 85): Int_0^220 w(z) 11 (1 - z/220) dz, the tapered sides simply trimmed",+ "body_count": 1,+ "volume_mm3": 335399.749+}diff --git a/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/recipe.json b/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/recipe.jsonnew file mode 100644index 0000000000..a5e821eae9--- /dev/null+++ b/tests/kernel-cases/fillets/5181-two-distance-chamfer-runs-past-tapered-sides/recipe.json@@ -0,0 +1,85 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Bracket"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -50,+ 0+ ],+ [+ 50,+ 0+ ],+ [+ 50,+ 85+ ],+ [+ 30.675635228421154,+ 222.5+ ],+ [+ -30.675635228421154,+ 222.5+ ],+ [+ -50,+ 85+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Bracket",+ "distance": 23,+ "body_name": "Bracket"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 0,+ 0,+ 0+ ]+ ],+ "distance": 220,+ "distance2": 11+ }+ }+ ]+}diff --git a/tests/kernel-cases/fillets/skipped-4161.json b/tests/kernel-cases/fillets/skipped-4161.jsonindex f8193b5e09..5cb5dcd210 100644--- a/tests/kernel-cases/fillets/skipped-4161.json+++ b/tests/kernel-cases/fillets/skipped-4161.json@@ -146,5 +146,57 @@{"source": "tangency-labs/solidcraft#4806","why": "no reproduction: a 0.2 mm chamfer chain on an unknown part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#4842",+ "why": "no geometry: variable chamfers (feature request)"+ },+ {+ "source": "tangency-labs/solidcraft#4848",+ "why": "no reproduction: a 1 mm chamfer of a curved chain on an unknown part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#4861",+ "why": "UI only: hovered edge contrast"+ },+ {+ "source": "tangency-labs/solidcraft#4871",+ "why": "no reproduction: a join that only touched, fixed on 0.20.0 per the reporter"+ },+ {+ "source": "tangency-labs/solidcraft#4926",+ "why": "no reproduction: two edges on a 14-feature unknown part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#4986",+ "why": "no geometry: Press Pull on chamfers and holes (feature request)"+ },+ {+ "source": "tangency-labs/solidcraft#5000",+ "why": "needs the user design: a 0.02 mm fillet beside a sliver on a key-ring part; the zip holds only a screenshot"+ },+ {+ "source": "tangency-labs/solidcraft#5001",+ "why": "no reproduction: one edge on an unknown part, no design"+ },+ {+ "source": "tangency-labs/solidcraft#5033",+ "why": "no geometry: the tangent chain adds edges the user didn't want (UI; dup of #5328's request)"+ },+ {+ "source": "tangency-labs/solidcraft#5061",+ "why": "needs the user design: a revolved bumper with patterned ribs, chamfers and cuts; no small stand-in"+ },+ {+ "source": "tangency-labs/solidcraft#5134",+ "why": "no geometry: the report arrived empty"+ },+ {+ "source": "tangency-labs/solidcraft#5141",+ "why": "needs the user design: a plate with a triangular rib in a component, a two-distance chamfer cutting too much"+ },+ {+ "source": "tangency-labs/solidcraft#5173",+ "why": "no kernel geometry: an edge pick at a corner point picks one edge silently (command validation)"}]diff --git a/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/expected.json b/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/expected.jsonnew file mode 100644index 0000000000..d96d498034--- /dev/null+++ b/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/expected.json@@ -0,0 +1,25 @@+{+ "sources": [+ "tangency-labs/solidcraft#5193"+ ],+ "what": "a turned pin (revolves with two grooves, a stepped bore with a drill point from one end, a stud with chamfered root and tip on the other) with two milled flats, exported to STEP and read back: truck's STEP lost two faces of the flats' neighbours and grew 0.075% (synthetic: the report's own pin, re-dimensioned)",+ "source": "analytic",+ "method": "the re-imported body is graded. Every section square to Z is a disc of the revolve profile's radius (4, chamfered 0.6 at both ends), less the end bore (r 1.6 from a 118-ish point at x 13..13.9, r 1.9 at the mouth), less the grooves r 3.3..4 (z -2..-6, -18..-18.8), less for z -13..0 the two circular segments beyond |x| = 3.3; the stud z 0..6 is r 2 with 0.25 and 0.4 chamfers. V = Int A(z) dz (python quadrature) = 998.79936 + 74.08360. Graded to 1e-4 relative, below truck's 7.5e-4 change; bbox x, y -4..4, z -24..6",+ "body_count": 1,+ "volume_mm3": 1072.88296,+ "bbox": {+ "min": [+ -4.0,+ -4.0,+ -24.0+ ],+ "max": [+ 4.0,+ 4.0,+ 6.0+ ]+ },+ "tolerance": {+ "rel": 0.0001+ }+}diff --git a/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/recipe.json b/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/recipe.jsonnew file mode 100644index 0000000000..d35927d95f--- /dev/null+++ b/tests/kernel-cases/import/5193-step-turned-pin-with-flats-round-trip/recipe.json@@ -0,0 +1,465 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.0,+ 0.0,+ -1.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Body"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 0,+ 3.4+ ],+ [+ 0.6,+ 4+ ],+ [+ 23.4,+ 4+ ],+ [+ 24,+ 3.4+ ],+ [+ 24,+ 0+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Body",+ "axis": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "dir": [+ 0.0,+ 0.0,+ -1.0+ ]+ },+ "angle": 360.0,+ "operation": "new",+ "body_name": "Pin"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.0,+ 0.0,+ -1.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Groove1",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 2,+ 3.3+ ],+ "p1": [+ 6,+ 4.5+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Groove1",+ "axis": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "dir": [+ 0.0,+ 0.0,+ -1.0+ ]+ },+ "angle": 360.0,+ "operation": "cut",+ "targets": [+ "Pin"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.0,+ 0.0,+ -1.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Groove2",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 18,+ 3.3+ ],+ "p1": [+ 18.8,+ 4.5+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Groove2",+ "axis": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "dir": [+ 0.0,+ 0.0,+ -1.0+ ]+ },+ "angle": 360.0,+ "operation": "cut",+ "targets": [+ "Pin"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.0,+ 0.0,+ -1.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Bore",+ "project_edges": false+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 24.5,+ 0+ ],+ [+ 24.5,+ 1.9+ ],+ [+ 23.7,+ 1.9+ ],+ [+ 23.7,+ 1.6+ ],+ [+ 13.9,+ 1.6+ ],+ [+ 13.0,+ 0+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Bore",+ "axis": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "dir": [+ 0.0,+ 0.0,+ -1.0+ ]+ },+ "angle": 360.0,+ "operation": "cut",+ "targets": [+ "Pin"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.0,+ 0.0,+ -1.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Stud",+ "project_edges": false+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 0,+ 1.75+ ],+ [+ -0.25,+ 2+ ],+ [+ -5.6,+ 2+ ],+ [+ -6,+ 1.6+ ],+ [+ -6,+ 0+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Stud",+ "axis": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "dir": [+ 0.0,+ 0.0,+ -1.0+ ]+ },+ "angle": 360.0,+ "operation": "join",+ "targets": [+ "Pin"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ -13.0+ ],+ "x_dir": [+ 1.0,+ 0.0,+ 0.0+ ],+ "y_dir": [+ 0.0,+ 1.0,+ 0.0+ ]+ },+ "name": "Flats",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 3.3,+ -2.5980762113533165+ ],+ "p1": [+ 5,+ 2.5980762113533165+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -5,+ -2.5980762113533165+ ],+ "p1": [+ -3.3,+ 2.5980762113533165+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Flats",+ "distance": 13.0,+ "operation": "cut",+ "targets": [+ "Pin"+ ]+ }+ },+ {+ "command": "file.export",+ "params": {+ "path": "$OUT/kernel-case-5193.step",+ "format": "step"+ }+ },+ {+ "command": "file.new",+ "params": {+ "name": "Reimported"+ }+ },+ {+ "command": "file.insert_step",+ "params": {+ "path": "$OUT/kernel-case-5193.step"+ }+ }+ ]+}diff --git a/tests/kernel-cases/import/skipped-4161.json b/tests/kernel-cases/import/skipped-4161.jsonindex e37cc35eb4..7643c36eba 100644--- a/tests/kernel-cases/import/skipped-4161.json+++ b/tests/kernel-cases/import/skipped-4161.json@@ -110,5 +110,21 @@{"source": "tangency-labs/solidcraft#4814","why": "no geometry: Convert Mesh needs the mesh's component active (dup of #4609)"+ },+ {+ "source": "tangency-labs/solidcraft#4898",+ "why": "no geometry: SVG curves offset as a mixed chain and moved (sketch, dup of #2149)"+ },+ {+ "source": "tangency-labs/solidcraft#4918",+ "why": "no geometry: Convert Mesh takes constant-section prisms only (dup of #4586)"+ },+ {+ "source": "tangency-labs/solidcraft#5090",+ "why": "no kernel geometry: an open mesh body measures a negative volume (mesh measure)"+ },+ {+ "source": "tangency-labs/solidcraft#5091",+ "why": "no geometry: KiCad board import (feature request)"}]diff --git a/tests/kernel-cases/sheet-metal/skipped-4161.json b/tests/kernel-cases/sheet-metal/skipped-4161.jsonindex 971ca1b163..6c5fd1c168 100644--- a/tests/kernel-cases/sheet-metal/skipped-4161.json+++ b/tests/kernel-cases/sheet-metal/skipped-4161.json@@ -30,5 +30,9 @@{"source": "tangency-labs/solidcraft#4720","why": "no geometry: two sheet-metal bodies combined lose their flat pattern, as warned (feature request)"+ },+ {+ "source": "tangency-labs/solidcraft#4968",+ "why": "no geometry: included bend angles in sheet-metal exports (feature request)"}]diff --git a/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/expected.json b/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/expected.jsonnew file mode 100644index 0000000000..aa0957cafc--- /dev/null+++ b/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4847"+ ],+ "what": "a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result'",+ "source": "analytic",+ "method": "shell: (2/3) pi (20^3 - 18^3). The ring's prism r 18..20, z 0..10 lies inside the dome's wall where r^2 + z^2 <= 20^2 (r >= 18 keeps it outside the cavity) and pokes out elsewhere: it adds 760 pi - Int_18^20 2 pi r sqrt(400 - r^2) dr = 760 pi - (2 pi/3) 76^1.5",+ "body_count": 1,+ "volume_mm3": 5540.612+}diff --git a/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/recipe.json b/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/recipe.jsonnew file mode 100644index 0000000000..7c7c430cc9--- /dev/null+++ b/tests/kernel-cases/shell/4847-join-base-ring-of-shelled-dome-back-into-it/recipe.json@@ -0,0 +1,113 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Quarter"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 20,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 20,+ 0+ ],+ "through": [+ 14.142136,+ 14.142136+ ],+ "end": [+ 0,+ 20+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 20+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Quarter",+ "axis": "y",+ "body_name": "Dome"+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ 0,+ 0,+ 0+ ]+ ],+ "thickness": 2+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 19,+ 0,+ 0+ ],+ "face_body": "Dome",+ "distance": 10,+ "direction": "negative",+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/expected.json b/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/expected.jsonnew file mode 100644index 0000000000..47f594ca6c--- /dev/null+++ b/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#5182",+ "tangency-labs/solidcraft#5368"+ ],+ "what": "a chamfered O6 through hole in a block (synthetic: the report's part was an imported STEP), its wall and chamfer deleted: refused ('face 8 borders face 7, which is curved; only planar neighbours can extend')",+ "source": "analytic",+ "method": "the hole's wall and chamfer are all its faces; deleting them heals the block's top and bottom across the hole: a plain 40x40x20 block, V = 32000, 6 faces",+ "body_count": 1,+ "faces": 6,+ "volume_mm3": 32000.0+}diff --git a/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/recipe.json b/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/recipe.jsonnew file mode 100644index 0000000000..51c2c24852--- /dev/null+++ b/tests/kernel-cases/shell/5182-delete-chamfered-hole-of-block/recipe.json@@ -0,0 +1,60 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 40,+ "width": 40,+ "height": 20,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 20,+ 20,+ 20+ ],+ "diameter": 6,+ "name": "Hole"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 23,+ 20,+ 20+ ]+ ],+ "distance": 1+ }+ },+ {+ "command": "face.delete",+ "params": {+ "faces": [+ [+ 23,+ 20,+ 10+ ],+ [+ 23.5,+ 20,+ 19.5+ ]+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/shell/skipped-4161.json b/tests/kernel-cases/shell/skipped-4161.jsonindex 9ca6533e72..e1aa44b30f 100644--- a/tests/kernel-cases/shell/skipped-4161.json+++ b/tests/kernel-cases/shell/skipped-4161.json@@ -86,5 +86,29 @@{"source": "tangency-labs/solidcraft#4822","why": "no reproduction: a screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#4886",+ "why": "no geometry: sketch offset of a mixed line/spline chain (sketch, a stated limit)"+ },+ {+ "source": "tangency-labs/solidcraft#4988",+ "why": "no geometry: the report arrived empty"+ },+ {+ "source": "tangency-labs/solidcraft#4990",+ "why": "no geometry: the report arrived empty"+ },+ {+ "source": "tangency-labs/solidcraft#5019",+ "why": "no geometry: sketch offset joining coincident ends (sketch)"+ },+ {+ "source": "tangency-labs/solidcraft#5050",+ "why": "no reproduction: shell of a user's revolved free-form profile (a stated limit; a plain tapered cup works); see the case from #4567"+ },+ {+ "source": "tangency-labs/solidcraft#5076",+ "why": "no reproduction: shell of a user's loft (free-form, a stated limit); see the loft shell case from #4743"}]diff --git a/tests/kernel-cases/sources.json b/tests/kernel-cases/sources.jsonindex 3fd402bdcc..ad4992726b 100644--- a/tests/kernel-cases/sources.json+++ b/tests/kernel-cases/sources.json@@ -1879,5 +1879,136 @@"4826": "issue, open","4827": "issue, open","4828": "issue, open",- "4829": "issue, open"+ "4829": "issue, open",+ "4830": "issue, open",+ "4831": "issue, open",+ "4840": "issue, open",+ "4842": "issue, open",+ "4845": "issue, open",+ "4847": "issue, open",+ "4848": "issue, open",+ "4852": "issue, open",+ "4853": "issue, closed",+ "4855": "issue, open",+ "4856": "issue, open",+ "4859": "issue, open",+ "4861": "issue, open",+ "4862": "issue, open",+ "4865": "issue, open",+ "4868": "issue, open",+ "4871": "issue, open",+ "4877": "issue, open",+ "4879": "issue, open",+ "4881": "issue, open",+ "4883": "issue, open",+ "4885": "issue, open",+ "4886": "issue, open",+ "4889": "issue, closed",+ "4892": "issue, open",+ "4898": "issue, open",+ "4900": "issue, open",+ "4910": "issue, closed",+ "4911": "issue, open",+ "4913": "issue, open",+ "4917": "issue, open",+ "4918": "issue, closed",+ "4921": "issue, open",+ "4922": "issue, closed",+ "4926": "issue, open",+ "4927": "issue, open",+ "4928": "issue, open",+ "4931": "issue, open",+ "4937": "issue, open",+ "4942": "issue, closed",+ "4943": "issue, open",+ "4944": "issue, open",+ "4945": "issue, open",+ "4946": "issue, open",+ "4951": "issue, open",+ "4955": "issue, open",+ "4957": "issue, closed",+ "4958": "issue, closed",+ "4961": "issue, closed",+ "4963": "issue, open",+ "4967": "issue, closed",+ "4968": "issue, closed",+ "4971": "issue, closed",+ "4974": "issue, closed",+ "4975": "issue, open",+ "4981": "issue, open",+ "4986": "issue, open",+ "4988": "issue, closed",+ "4989": "issue, open",+ "4990": "issue, open",+ "4993": "issue, open",+ "5000": "issue, open",+ "5001": "issue, open",+ "5002": "issue, open",+ "5018": "issue, open",+ "5019": "issue, open",+ "5021": "issue, closed",+ "5022": "issue, closed",+ "5023": "issue, closed",+ "5024": "issue, open",+ "5032": "issue, open",+ "5033": "issue, open",+ "5035": "issue, open",+ "5037": "issue, open",+ "5039": "issue, open",+ "5040": "issue, open",+ "5041": "issue, open",+ "5044": "issue, open",+ "5049": "issue, closed",+ "5050": "issue, open",+ "5054": "issue, open",+ "5055": "issue, closed",+ "5061": "issue, open",+ "5065": "issue, open",+ "5066": "issue, closed",+ "5068": "issue, closed",+ "5069": "issue, open",+ "5072": "issue, open",+ "5073": "issue, open",+ "5075": "issue, open",+ "5076": "issue, open",+ "5077": "issue, open",+ "5078": "issue, closed",+ "5079": "issue, closed",+ "5080": "issue, open",+ "5082": "issue, open",+ "5089": "issue, closed",+ "5090": "issue, open",+ "5091": "issue, open",+ "5102": "issue, open",+ "5106": "issue, closed",+ "5111": "issue, open",+ "5122": "issue, open",+ "5123": "issue, open",+ "5125": "issue, open",+ "5126": "issue, open",+ "5129": "issue, open",+ "5134": "issue, open",+ "5135": "issue, closed",+ "5136": "issue, open",+ "5141": "issue, open",+ "5142": "issue, open",+ "5144": "issue, closed",+ "5146": "issue, open",+ "5149": "issue, open",+ "5156": "issue, open",+ "5157": "issue, open",+ "5158": "issue, open",+ "5171": "issue, open",+ "5172": "issue, closed",+ "5173": "issue, open",+ "5175": "issue, closed",+ "5180": "issue, open",+ "5181": "issue, open",+ "5182": "issue, open",+ "5185": "issue, closed",+ "5189": "issue, open",+ "5192": "issue, open",+ "5193": "issue, open",+ "5195": "issue, open",+ "5197": "issue, open"}diff --git a/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/expected.json b/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/expected.jsonnew file mode 100644index 0000000000..272c54c9cc--- /dev/null+++ b/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#5037"+ ],+ "what": "a box wall swept round a rounded-rectangle rim (lines and r5 arcs) from a profile standing square to the path at its start, joined to the floor: the sweep didn't follow the path (synthetic: the report's card box had a stepped profile)",+ "source": "analytic",+ "method": "floor 94x64 r7 x 2 (z -2..0). The wall section 2 x 10 is centred on the path, so by Pappus it adds 20 x the path's length 2*80 + 2*50 + 2 pi 5; it stands inside the floor's outline. V = floor + wall",+ "body_count": 1,+ "volume_mm3": 17776.1946+}diff --git a/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/recipe.json b/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/recipe.jsonnew file mode 100644index 0000000000..c89099bd5f--- /dev/null+++ b/tests/kernel-cases/sweeps/5037-sweep-wall-round-rounded-rectangle-rim/recipe.json@@ -0,0 +1,240 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Floor"+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ -47,+ -32+ ],+ "p1": [+ 47,+ 32+ ],+ "radius": 7+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Floor",+ "distance": 2,+ "direction": "negative",+ "body_name": "Box"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Rim",+ "project_edges": false+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -40,+ -30+ ],+ [+ 40,+ -30+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 40,+ -30+ ],+ "through": [+ 43.535534,+ -28.535534+ ],+ "end": [+ 45,+ -25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 45,+ -25+ ],+ [+ 45,+ 25+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 45,+ 25+ ],+ "through": [+ 43.535534,+ 28.535534+ ],+ "end": [+ 40,+ 30+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 40,+ 30+ ],+ [+ -40,+ 30+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ -40,+ 30+ ],+ "through": [+ -43.535534,+ 28.535534+ ],+ "end": [+ -45,+ 25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -45,+ 25+ ],+ [+ -45,+ -25+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ -45,+ -25+ ],+ "through": [+ -43.535534,+ -28.535534+ ],+ "end": [+ -40,+ -30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -40,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Wall",+ "project_edges": false+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -31,+ 0+ ],+ "p1": [+ -29,+ 10+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.sweep",+ "params": {+ "sketch": "Wall",+ "path_sketch": "Rim",+ "path": [+ "l1",+ "a1",+ "l2",+ "a2",+ "l3",+ "a3",+ "l4",+ "a4"+ ],+ "operation": "join",+ "targets": [+ "Box"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/expected.json b/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/expected.jsonnew file mode 100644index 0000000000..18fda16333--- /dev/null+++ b/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#5195"+ ],+ "what": "a cylinder whose 5 mm chamfered rim is revolve-cut to a concave cove: a quarter-circle arc through the chamfer's two ends, centred on the old corner, the region between it and the old corner (the chamfer's triangle and the lens) cut round 360 deg: 'boolean Cut: no result'",+ "source": "analytic",+ "method": "cylinder r20 x 30; chamfer and cove together remove the quarter disc r5 at the corner (r 15..20, z 25..30, centred at (20,30)). Pappus: area 25 pi/4, centroid at radius 20 - 4*5/(3 pi): V = pi 400 30 - 2 pi (20 - 20/(3 pi)) 25 pi/4. Faces: side, bottom, top disc r15 and the cove (a torus) = 4",+ "body_count": 1,+ "faces": 4,+ "volume_mm3": 35493.5101+}diff --git a/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/recipe.json b/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/recipe.jsonnew file mode 100644index 0000000000..fb55e4b99f--- /dev/null+++ b/tests/kernel-cases/sweeps/5195-revolve-cut-cove-replacing-a-chamfer/recipe.json@@ -0,0 +1,130 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 20,+ "height": 30,+ "body_name": "Cyl"+ }+ },+ {+ "command": "solid.chamfer",+ "params": {+ "edges": [+ [+ 20,+ 0,+ 30+ ]+ ],+ "distance": 5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Cove",+ "project_edges": false+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 15,+ 30+ ],+ [+ 20,+ 30+ ],+ [+ 20,+ 25+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 15,+ 30+ ],+ "through": [+ 16.464466094067262,+ 26.464466094067262+ ],+ "end": [+ 20,+ 25+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 15,+ 30+ ],+ [+ 20,+ 25+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Cove",+ "profiles": [+ {+ "point": [+ 19,+ 29+ ]+ },+ {+ "point": [+ 16.6,+ 27.0+ ]+ }+ ],+ "axis": "y",+ "angle": "360 deg",+ "operation": "cut",+ "targets": [+ "Cyl"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/sweeps/skipped-4161.json b/tests/kernel-cases/sweeps/skipped-4161.jsonindex 07e6753a04..cf6a8761c1 100644--- a/tests/kernel-cases/sweeps/skipped-4161.json+++ b/tests/kernel-cases/sweeps/skipped-4161.json@@ -110,5 +110,57 @@{"source": "tangency-labs/solidcraft#4828","why": "needs the author's real duct part (STEP operands of a user design); a performance case"+ },+ {+ "source": "tangency-labs/solidcraft#4830",+ "why": "UI only: lofting to a point from the dialog (the command already takes an apex)"+ },+ {+ "source": "tangency-labs/solidcraft#4855",+ "why": "needs the user design: a parametric bearing revolve-cut through ten sketch regions"+ },+ {+ "source": "tangency-labs/solidcraft#4868",+ "why": "UI only: home view theme colours"+ },+ {+ "source": "tangency-labs/solidcraft#4889",+ "why": "no reproduction: a screenshot and a video link, no message"+ },+ {+ "source": "tangency-labs/solidcraft#4900",+ "why": "no reproduction: surface loft between splines refused, no message or design"+ },+ {+ "source": "tangency-labs/solidcraft#4942",+ "why": "no reproduction: a loft join between annuli of a user's part, screenshot only"+ },+ {+ "source": "tangency-labs/solidcraft#4946",+ "why": "no reproduction: last command only (a 15 deg symmetric revolve join), no design"+ },+ {+ "source": "tangency-labs/solidcraft#4961",+ "why": "no geometry: Revolve about a construction axis (dup of #4506)"+ },+ {+ "source": "tangency-labs/solidcraft#5023",+ "why": "no geometry: duplicate profile indexes accepted (command validation)"+ },+ {+ "source": "tangency-labs/solidcraft#5035",+ "why": "no reproduction: a slow revolve cut of a polygon profile on an unknown part (0.18.4)"+ },+ {+ "source": "tangency-labs/solidcraft#5054",+ "why": "no geometry: sketches on a patch body's flat face (feature request)"+ },+ {+ "source": "tangency-labs/solidcraft#5077",+ "why": "no geometry: Revolve taking a body face as its profile (feature request, PR #5170)"+ },+ {+ "source": "tangency-labs/solidcraft#5192",+ "why": "no geometry: \"unknown sketch line\" for the axis (command parameters), no design"}]diff --git a/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/expected.json b/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/expected.jsonnew file mode 100644index 0000000000..5dedb8f884--- /dev/null+++ b/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#5146"+ ],+ "what": "a O23 shaft with a modelled M23x1 thread joined onto the O26 cylinder it stands on: SolidCraft ended without a clean exit during the combine",+ "source": "invariants",+ "method": "the shaft's end face lies on the base's top face, so the join is one solid: one valid closed body, within the case's timeout (modelled threads are slow: 600 s)",+ "body_count": 1,+ "timeout_s": 600+}diff --git a/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/recipe.json b/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/recipe.jsonnew file mode 100644index 0000000000..af48bccd95--- /dev/null+++ b/tests/kernel-cases/threads/5146-join-m23x1-threaded-shaft-onto-wider-base/recipe.json@@ -0,0 +1,48 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "diameter": 26,+ "height": 10,+ "body_name": "Base"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "diameter": 23,+ "height": 20,+ "base": [+ 0,+ 0,+ 10+ ],+ "operation": "new",+ "body_name": "Shaft"+ }+ },+ {+ "command": "solid.thread",+ "params": {+ "face": [+ 11.5,+ 0,+ 20+ ],+ "designation": "M23x1",+ "modeled": true+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Base",+ "tools": [+ "Shaft"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/threads/skipped-4161.json b/tests/kernel-cases/threads/skipped-4161.jsonindex dc82ef3239..e92dcc657a 100644--- a/tests/kernel-cases/threads/skipped-4161.json+++ b/tests/kernel-cases/threads/skipped-4161.json@@ -58,5 +58,21 @@{"source": "tangency-labs/solidcraft#4799","why": "no geometry: cosmetic threads don't cut the model, by design"+ },+ {+ "source": "tangency-labs/solidcraft#4913",+ "why": "duplicate of threads/3311-two-tapped-holes-both-modelled-threaded: a second modelled thread after the first"+ },+ {+ "source": "tangency-labs/solidcraft#4963",+ "why": "no geometry: a modelled thread needs the tap-drill hole, by design"+ },+ {+ "source": "tangency-labs/solidcraft#4971",+ "why": "no geometry: no coarse M28 in ISO metric (designation; M28x2 works)"+ },+ {+ "source": "tangency-labs/solidcraft#5055",+ "why": "no geometry: no coarse thread past M56 (designation; M75x2 works)"}]