Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 388/509: Ladder: the golden recorded on SMLib 60b1c6a with tiers 05, 06 and 12's new cases

jyviko98ec65d94df9
diff --git a/docs/kernel-ladder.md b/docs/kernel-ladder.md
index ea1595273f..6d939489d9 100644
--- a/docs/kernel-ladder.md
+++ b/docs/kernel-ladder.md
@@ -12,13 +12,14 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail,
| 02-booleans | booleans in the degeneracy classes, and cuts that end in a single line | 25 | 25 pass | – |
| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – |
| 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – |
-| 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – |
-| 06-threads | modelled threads | 19 | 19 pass | – |
-| 07-fillets | constant, variable and corner fillets | 18 | 17 pass, 1 unsupported | – |
+| 05-holes-and-taps | holes and tapped holes | 17 | 17 pass | – |
+| 06-threads | modelled threads | 30 | 1 fail, 29 pass | 023-external-1-2-npt |
+| 07-fillets | constant, variable and corner fillets | 19 | 19 pass | – |
| 08-chamfers | chamfers | 8 | 8 pass | – |
| 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – |
| 10-patterns-and-mirrors | patterns and mirrors | 8 | 8 pass | – |
| 11-cumulative-parts | parts combining every tier | 4 | 4 pass | – |
+| 12-sheet-metal | sheet metal: flanges, closed corners, reliefs, hems, folds and the flat pattern | 14 | 14 pass | – |
Cases where SMLib's check gave no verdict on a body (SMLib can't take the record yet), so only the record's checks graded validity: 0.
@@ -28,141 +29,171 @@ Times are the commands' own, in seconds, from the case's process; **golden** is
| Case | What | Answer | Result | s | golden s | changes |
|---|---|---|---|---|---|---|
-| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.003 | 0.003 | |
| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.004 | 0.004 | |
-| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.017 | 0.017 | |
-| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.025 | 0.025 | |
-| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.032 | 0.032 | |
-| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.575 | 0.575 | |
-| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.006 | 0.006 | |
-| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.007 | 0.007 | |
-| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.010 | 0.010 | |
-| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | |
-| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | |
-| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.012 | 0.012 | |
-| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | |
+| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | |
+| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.037 | 0.037 | |
+| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.041 | 0.041 | |
+| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.043 | 0.043 | |
+| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.172 | 0.172 | |
+| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.011 | 0.011 | |
+| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.012 | 0.012 | |
+| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | |
+| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.013 | 0.013 | |
| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | |
-| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | |
-| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.016 | 0.016 | |
-| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | |
-| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | |
-| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.028 | 0.028 | |
-| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.029 | 0.029 | |
-| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | |
-| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.043 | 0.043 | |
-| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.044 | 0.044 | |
-| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.048 | 0.048 | |
-| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.050 | 0.050 | |
-| ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.055 | 0.055 | |
-| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.060 | 0.060 | |
-| ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.061 | 0.061 | |
-| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.132 | 0.132 | |
-| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.237 | 0.237 | |
-| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.355 | 1.355 | |
-| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.013 | 0.013 | |
-| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.014 | 0.014 | |
-| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.016 | 0.016 | |
-| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.023 | 0.023 | |
-| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.050 | 0.050 | |
-| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.059 | 0.059 | |
-| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.065 | 0.065 | |
-| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.070 | 0.070 | |
-| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.124 | 0.124 | |
-| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.136 | 0.136 | |
-| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.011 | 0.011 | |
-| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.015 | 0.015 | |
-| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | analytic | pass | 0.027 | 0.027 | |
-| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | analytic | pass | 0.035 | 0.035 | |
-| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.042 | 0.042 | |
-| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.059 | 0.059 | |
-| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | analytic | pass | 0.072 | 0.072 | |
-| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.084 | 0.084 | |
-| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.131 | 0.131 | |
-| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.141 | 0.141 | |
-| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | analytic | pass | 0.681 | 0.681 | |
-| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | analytic | pass | 1.376 | 1.376 | |
-| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | |
-| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.033 | 0.033 | |
-| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.034 | 0.034 | |
-| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.036 | 0.036 | |
-| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.044 | 0.044 | |
-| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.045 | 0.045 | |
-| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.046 | 0.046 | |
-| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.051 | 0.051 | |
-| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.089 | 0.089 | |
-| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.102 | 0.102 | |
-| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.113 | 0.113 | |
-| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.130 | 0.130 | |
-| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.280 | 0.280 | |
-| ladder/06-threads/012-external-acme-3-4-6 | a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns | analytic | pass | 0.839 | 0.839 | |
-| ladder/06-threads/013-external-s20x4 | a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns | analytic | pass | 0.945 | 0.945 | |
-| ladder/06-threads/011-external-tr20x4 | a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns | analytic | pass | 0.956 | 0.956 | |
-| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face | analytic | pass | 1.088 | 1.088 | |
-| ladder/06-threads/015-internal-tr20x4-nut | a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block | analytic | pass | 1.200 | 1.200 | |
-| ladder/06-threads/014-external-buttress-asme-1.5-8 | a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns | analytic | pass | 1.347 | 1.347 | |
-| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | analytic | pass | 1.462 | 1.462 | |
-| ladder/06-threads/016-external-m10-left-hand | 001's modelled M10 thread, left-handed: the same volume, turning the other way | analytic | pass | 1.690 | 1.690 | |
-| ladder/06-threads/019-external-tr40x14-p7-two-start | a modelled two-start trapezoidal Tr40x14(P7) thread (ISO 2904, ISO 2903) on a d40 shaft, three leads long | analytic | pass | 1.831 | 1.831 | |
-| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.872 | 1.872 | |
-| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.920 | 1.920 | |
-| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet | analytic | pass | 1.964 | 1.964 | |
-| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 2.128 | 2.128 | |
-| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole | analytic | pass | 2.144 | 2.144 | |
-| ladder/06-threads/009-thread-runout-length | 004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder | analytic | pass | 2.203 | 2.203 | |
-| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.626 | 2.626 | |
-| ladder/06-threads/017-external-m10-chamfered-tip | 001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove | analytic | pass | 3.485 | 3.485 | |
-| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder | analytic | pass | 3.706 | 3.706 | |
-| ladder/06-threads/018-external-m10-both-hands | 001's modelled M10 thread cut both ways: a right- and a left-handed groove crossing on a d10 x 30 cylinder | analytic | pass | 7.756 | 7.756 | |
-| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | |
-| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | |
-| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.016 | 0.016 | |
-| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | |
-| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | analytic | pass | 0.019 | 0.019 | |
+| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | |
+| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.014 | 0.014 | |
+| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.014 | 0.014 | |
+| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.025 | 0.025 | |
+| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.033 | 0.033 | |
+| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.036 | 0.036 | |
+| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.037 | 0.037 | |
+| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.037 | 0.037 | |
+| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.041 | 0.041 | |
+| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.045 | 0.045 | |
+| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.052 | 0.052 | |
+| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.059 | 0.059 | |
+| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.059 | 0.059 | |
+| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.069 | 0.069 | |
+| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.076 | 0.076 | |
+| ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.087 | 0.087 | |
+| ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.131 | 0.131 | |
+| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.182 | 0.182 | |
+| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.201 | 0.201 | |
+| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.559 | 1.559 | |
+| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.010 | 0.010 | |
+| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.010 | 0.010 | |
+| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.011 | 0.011 | |
+| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.015 | 0.015 | |
+| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.024 | 0.024 | |
+| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.024 | 0.024 | |
+| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.031 | 0.031 | |
+| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.042 | 0.042 | |
+| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.060 | 0.060 | |
+| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.060 | 0.060 | |
+| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.010 | 0.010 | |
+| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.020 | 0.020 | |
+| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | analytic | pass | 0.021 | 0.021 | |
+| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | analytic | pass | 0.031 | 0.031 | |
+| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.036 | 0.036 | |
+| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | analytic | pass | 0.037 | 0.037 | |
+| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.039 | 0.039 | |
+| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.069 | 0.069 | |
+| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.099 | 0.099 | |
+| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.110 | 0.110 | |
+| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | analytic | pass | 0.463 | 0.463 | |
+| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | analytic | pass | 1.323 | 1.323 | |
+| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.023 | 0.023 | |
+| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.024 | 0.024 | |
+| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.026 | 0.026 | |
+| ladder/05-holes-and-taps/017-tapped-1-4-npt-through | a 1/4-18 NPT tapped hole through the stock (ASME B1.20.1): a straight hole at the tap maker's 10.85 mm, cosmetic thread | analytic | pass | 0.028 | 0.028 | |
+| ladder/05-holes-and-taps/016-tapped-rc-1-2-through | an Rc 1/2 tapped hole through the stock (ISO 7-1 internal taper): a straight hole at the tap maker's 17.6 mm, cosmetic thread | analytic | pass | 0.028 | 0.028 | |
+| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.029 | 0.029 | |
+| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.030 | 0.030 | |
+| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.032 | 0.032 | |
+| ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind | a 1/4-28 UNF tapped blind hole 10 deep, flat bottom: drilled 5.45 mm, cosmetic thread | analytic | pass | 0.034 | 0.034 | |
+| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.036 | 0.036 | |
+| ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through | a 1/4-20 UNC tapped hole through the stock: drilled #7 (0.201 in), cosmetic thread | analytic | pass | 0.041 | 0.041 | |
+| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | |
+| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.059 | 0.059 | |
+| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.078 | 0.078 | |
+| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.127 | 0.127 | |
+| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.134 | 0.134 | |
+| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.256 | 0.256 | |
+| ladder/06-threads/030-square-thread-refused | a square thread on a d10 x 30 cylinder: refused, no current standard defines one | invariants | pass | 0.018 | 0.018 | |
+| ladder/06-threads/012-external-acme-3-4-6 | a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns | analytic | pass | 0.634 | 0.634 | |
+| ladder/06-threads/011-external-tr20x4 | a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns | analytic | pass | 0.648 | 0.648 | |
+| ladder/06-threads/029-external-tr20x4-chamfer-needs-depth | 011's Tr20x4 thread with a chamfered tip and no depth: refused, ISO 4753 is for metric threads | invariants | pass | 0.657 | 0.657 | |
+| ladder/06-threads/013-external-s20x4 | a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns | analytic | pass | 0.665 | 0.665 | |
+| ladder/06-threads/021-internal-rp-1-2 | a modelled Rp 1/2 parallel internal pipe thread (ISO 7-1) in a d18.631 (its minor) bore through a 40x40 block six turns thick | analytic | pass | 0.685 | 0.685 | |
+| ladder/06-threads/020-external-g-1-2 | a modelled G 1/2 parallel pipe thread (ISO 228-1, 55 deg) on a d20.955 shaft, six turns | analytic | pass | 0.695 | 0.695 | |
+| ladder/06-threads/015-internal-tr20x4-nut | a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block | analytic | pass | 0.695 | 0.695 | |
+| ladder/06-threads/014-external-buttress-asme-1.5-8 | a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns | analytic | pass | 0.716 | 0.716 | |
+| ladder/06-threads/026-external-s20x4-steep-flank-start-to-shoulder | a modelled S20x4 buttress thread on a d20 shaft down to a d30 shoulder, the steep flank toward the thread's start (down): the 30 deg wall faces the shoulder | analytic | pass | 0.746 | 0.746 | |
+| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | analytic | pass | 0.774 | 0.774 | |
+| ladder/06-threads/025-external-s20x4-steep-flank-end-to-shoulder | a modelled S20x4 buttress thread on a d20 shaft down to a d30 shoulder, the steep flank toward the thread's end (up, the default): the 3 deg wall faces the shoulder | analytic | pass | 0.776 | 0.776 | |
+| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face | analytic | pass | 0.855 | 0.855 | |
+| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.161 | 1.161 | |
+| ladder/06-threads/019-external-tr40x14-p7-two-start | a modelled two-start trapezoidal Tr40x14(P7) thread (ISO 2904, ISO 2903) on a d40 shaft, three leads long | analytic | pass | 1.196 | 1.196 | |
+| ladder/06-threads/028-external-tr20x4-chamfer-30-deg-2.5-deep | 011's modelled Tr20x4 thread with chamfered ends at its own angle and depth: 30 deg to the axis, 2.5 mm in from the major diameter | analytic | pass | 1.311 | 1.311 | |
+| ladder/06-threads/022-external-r-1-2-taper | a modelled R 1/2 taper pipe thread (ISO 7-1, 55 deg, 1 in 16) on a 21.3 mm pipe (ISO 65), its standard 13.2 mm from the pipe's end | analytic | pass | 1.344 | 1.344 | |
+| ladder/06-threads/024-internal-rc-1-2-taper | a modelled Rc 1/2 internal taper pipe thread (ISO 7-1) in a d17.6 hole (the tap maker's) through a 13.2 mm plate, from its top face | analytic | pass | 1.383 | 1.383 | |
+| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole | analytic | pass | 1.403 | 1.403 | |
+| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet | analytic | pass | 1.437 | 1.437 | |
+| ladder/06-threads/009-thread-runout-length | 004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder | analytic | pass | 1.439 | 1.439 | |
+| ladder/06-threads/023-external-1-2-npt | a modelled 1/2-14 NPT taper pipe thread (ASME B1.20.1, 60 deg, 1 in 16) on its 0.840 in pipe, its effective thread L2 from the end | analytic | **FAIL**: volume_mm3 8227.346353 (want 8226.404942) | 1.619 | 1.619 | |
+| ladder/06-threads/016-external-m10-left-hand | 001's modelled M10 thread, left-handed: the same volume, turning the other way | analytic | pass | 1.626 | 1.626 | |
+| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.690 | 1.690 | |
+| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.713 | 1.713 | |
+| ladder/06-threads/027-external-m10-chamfered-start | 001's modelled M10 thread with ISO 4753's chamfered end at the end it starts from only (`tip: start`, from the top) | analytic | pass | 2.526 | 2.526 | |
+| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.534 | 2.534 | |
+| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder | analytic | pass | 3.074 | 3.074 | |
+| ladder/06-threads/017-external-m10-chamfered-tip | 001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the external minor diameter d3, cut after the groove | analytic | pass | 3.340 | 3.340 | |
+| ladder/06-threads/018-external-m10-both-hands | 001's modelled M10 thread cut both ways: a right- and a left-handed groove crossing on a d10 x 30 cylinder | analytic | pass | 6.515 | 6.515 | |
+| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.008 | 0.008 | |
+| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.009 | 0.009 | |
+| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | analytic | pass | 0.011 | 0.011 | |
+| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.017 | 0.017 | |
+| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.017 | 0.017 | |
+| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.019 | 0.019 | |
| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.020 | 0.020 | |
-| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.021 | 0.021 | |
-| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.023 | 0.023 | |
-| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.024 | 0.024 | |
-| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.027 | 0.027 | |
-| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | analytic | pass | 0.037 | 0.037 | |
-| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist | invariants | pass | 0.046 | 0.046 | |
-| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | analytic | pass | 0.060 | 0.060 | |
-| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.078 | 0.078 | |
-| ladder/07-fillets/018-corner-three-sequential-r5-r3-r2 | rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner | invariants | pass | 0.080 | 0.080 | |
-| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.080 | 0.080 | |
-| ladder/07-fillets/013-corner-setback | three r5 rounds at the corner (60,40,20) with setbacks of 8 mm along each edge | invariants | pass | 0.117 | 0.117 | |
-| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.690 | 0.690 | |
-| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | |
-| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.009 | 0.009 | |
-| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.012 | 0.012 | |
+| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | analytic | pass | 0.024 | 0.024 | |
+| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.025 | 0.025 | |
+| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.032 | 0.032 | |
+| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.048 | 0.048 | |
+| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | analytic | pass | 0.051 | 0.051 | |
+| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist | invariants | pass | 0.053 | 0.053 | |
+| ladder/07-fillets/018-corner-three-sequential-r5-r3-r2 | rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner | invariants | pass | 0.061 | 0.061 | |
+| ladder/07-fillets/013-corner-setback | three r5 rounds at the corner (60,40,20) with setbacks of 8 mm along each edge | invariants | pass | 0.062 | 0.062 | |
+| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.075 | 0.075 | |
+| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.480 | 0.480 | |
+| ladder/07-fillets/019-concave-corner-g2-patch | three concave r5 rounds at the inner corner of a 20x20x10 notch, with the g2 corner patch | invariants | pass | 2.084 | 2.084 | |
+| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | pass | 2.173 | 2.173 | |
| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | |
-| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.024 | 0.024 | |
-| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | analytic | pass | 0.029 | 0.029 | |
-| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.070 | 0.070 | |
-| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.749 | 0.749 | |
-| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | 0.016 | |
-| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |
+| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.012 | 0.012 | |
+| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | |
+| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.015 | 0.015 | |
+| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.018 | 0.018 | |
+| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | analytic | pass | 0.031 | 0.031 | |
+| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.060 | 0.060 | |
+| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.681 | 0.681 | |
+| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | |
+| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | |
+| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | |
| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |
-| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.018 | 0.018 | |
-| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.018 | 0.018 | |
-| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.038 | 0.038 | |
-| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.060 | 0.060 | |
-| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.075 | 0.075 | |
-| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.102 | 0.102 | |
-| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | analytic | pass | 0.105 | 0.105 | |
-| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | analytic | pass | 0.124 | 0.124 | |
-| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.174 | 0.174 | |
-| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.236 | 0.236 | |
-| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.922 | 0.922 | |
-| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | analytic | pass | 1.078 | 1.078 | |
-| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.031 | 0.031 | |
-| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.067 | 0.067 | |
+| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.017 | 0.017 | |
+| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.017 | 0.017 | |
+| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.040 | 0.040 | |
+| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.057 | 0.057 | |
+| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.071 | 0.071 | |
+| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.077 | 0.077 | |
+| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | analytic | pass | 0.077 | 0.077 | |
+| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | analytic | pass | 0.079 | 0.079 | |
+| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.112 | 0.112 | |
+| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.696 | 0.696 | |
+| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | analytic | pass | 0.965 | 0.965 | |
+| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.035 | 0.035 | |
+| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.047 | 0.047 | |
| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.074 | 0.074 | |
-| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.175 | 0.175 | |
-| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.315 | 0.315 | |
-| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.351 | 0.351 | |
-| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.855 | 0.855 | |
-| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | analytic | pass | 1.765 | 1.765 | |
-| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.088 | 0.088 | |
-| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.618 | 0.618 | |
-| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | analytic | pass | 1.821 | 1.821 | |
-| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | analytic | pass | 2.307 | 2.307 | |
+| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.239 | 0.239 | |
+| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.299 | 0.299 | |
+| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.484 | 0.484 | |
+| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.758 | 0.758 | |
+| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | analytic | pass | 1.590 | 1.590 | |
+| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.089 | 0.089 | |
+| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.673 | 0.673 | |
+| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | analytic | pass | 2.166 | 2.166 | |
+| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | analytic | pass | 2.313 | 2.313 | |
+| ladder/12-sheet-metal/001-base-flange | a 100 x 60 base flange, 2 mm sheet | analytic | pass | 0.002 | 0.002 | |
+| ladder/12-sheet-metal/002-edge-flange-90 | a 20 mm 90 deg edge flange along the base's front edge | analytic | pass | 0.005 | 0.005 | |
+| ladder/12-sheet-metal/010-fold-90 | 001's base folded 90 deg up along a sketch line across it at x = 70 | analytic | pass | 0.005 | 0.005 | |
+| ladder/12-sheet-metal/009-hem-on-the-back-edge | 002's L with an 8 mm hem on the base's back edge, folded under it with a 1 mm inner radius | analytic | pass | 0.006 | 0.006 | |
+| ladder/12-sheet-metal/012-fold-refolded | 011's flat refolded: 010's part again | analytic | pass | 0.008 | 0.008 | |
+| ladder/12-sheet-metal/007-corner-relief-rectangular | 003's tray with a rectangular corner relief 4 mm across at each corner | analytic | pass | 0.008 | 0.008 | |
+| ladder/12-sheet-metal/011-fold-unfolded | 010's fold unfolded: the flat 100 x 60 plate again | analytic | pass | 0.010 | 0.010 | |
+| ladder/12-sheet-metal/004-four-flanges-72-leaning-out | 20 mm flanges at 72 deg on all four edges, made together and closed at the corners, leaning out: the panel ends run on along a slant | analytic | pass | 0.014 | 0.014 | |
+| ladder/12-sheet-metal/003-four-flanges-90-closed-corners | 20 mm 90 deg flanges on all four edges, made together: the corners close with the rule's gap, notch relief | analytic | pass | 0.014 | 0.014 | |
+| ladder/12-sheet-metal/005-four-flanges-108-leaning-in | 20 mm flanges at 108 deg on all four edges, made together and closed at the corners, leaning in over the base: the panel ends are cut back along a slant where they would overlap | analytic | pass | 0.014 | 0.014 | |
+| ladder/12-sheet-metal/006-corner-relief-round | 003's tray with a round corner relief 4 mm across at each corner | analytic | pass | 0.017 | 0.017 | |
+| ladder/12-sheet-metal/013-flat-pattern | the flat pattern of 003's tray: its outline's size and area, and its four bend lines | analytic | pass | 0.032 | 0.032 | |
+| ladder/12-sheet-metal/008-corner-relief-tear | 003's tray with torn corners: the bends run to the corner and each end is cut straight, in the flat, to where its panel's end starts | analytic | pass | 0.071 | 0.071 | |
+| ladder/12-sheet-metal/014-bracket | a bracket: a 30 mm flange on the front edge, a 10 mm lip turned out on its far edge, a d10 hole through the base | analytic | pass | 0.092 | 0.092 | |
diff --git a/tests/kernel-cases/ladder/golden.json b/tests/kernel-cases/ladder/golden.json
index b102ff3cae..13c200d8bc 100644
--- a/tests/kernel-cases/ladder/golden.json
+++ b/tests/kernel-cases/ladder/golden.json
@@ -9,67 +9,67 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.003599988,
+ "seconds": 0.004062439,
"status": "pass"
},
"ladder/01-primitives/002-cylinder": {
"measured": {
- "area_mm2": 2513.27408091628,
+ "area_mm2": 2513.2741228740038,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 9424.777353639352
+ "volume_mm3": 9424.777960803078
},
- "seconds": 0.031665293,
+ "seconds": 0.043371433,
"status": "pass"
},
"ladder/01-primitives/003-cone": {
"measured": {
- "area_mm2": 1307.6181023117074,
+ "area_mm2": 1307.6180919431065,
"body_count": 1,
"edges": 3,
"faces": 2,
"vertices": 3,
- "volume_mm3": 3141.59242697122
+ "volume_mm3": 3141.592653566665
},
- "seconds": 0.024871256,
+ "seconds": 0.03683274,
"status": "pass"
},
"ladder/01-primitives/004-frustum": {
"measured": {
- "area_mm2": 1364.1829847648855,
+ "area_mm2": 1364.1829574594403,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 3665.191341582638
+ "volume_mm3": 3665.1914291694306
},
- "seconds": 0.016772876,
+ "seconds": 0.040579849,
"status": "pass"
},
"ladder/01-primitives/005-sphere": {
"measured": {
- "area_mm2": 1256.6371531595494,
+ "area_mm2": 1256.6370614485081,
"body_count": 1,
"edges": 1,
"faces": 1,
"vertices": 2,
- "volume_mm3": 4188.791896913583
+ "volume_mm3": 4188.790205011419
},
- "seconds": 0.002894944,
+ "seconds": 0.005130222,
"status": "pass"
},
"ladder/01-primitives/006-torus": {
"measured": {
- "area_mm2": 3947.8419806693646,
+ "area_mm2": 3947.841760474683,
"body_count": 1,
"edges": 1,
"faces": 1,
"vertices": 1,
- "volume_mm3": 9869.61010099745
+ "volume_mm3": 9869.604401217126
},
- "seconds": 0.57458714,
+ "seconds": 0.172193392,
"status": "pass"
},
"ladder/02-booleans/001-coincident-face-join": {
@@ -81,7 +81,7 @@
"vertices": 8,
"volume_mm3": 72000.0
},
- "seconds": 0.006455716,
+ "seconds": 0.012248454,
"status": "pass"
},
"ladder/02-booleans/002-coplanar-overlap-join": {
@@ -93,19 +93,19 @@
"vertices": 16,
"volume_mm3": 84000.0
},
- "seconds": 0.013407577,
+ "seconds": 0.01398496,
"status": "pass"
},
"ladder/02-booleans/003-pocket-flush-with-top": {
"measured": {
- "area_mm2": 9600.000000000002,
+ "area_mm2": 9600.0,
"body_count": 1,
"edges": 24,
"faces": 11,
"vertices": 16,
"volume_mm3": 44000.0
},
- "seconds": 0.012900423,
+ "seconds": 0.013073515,
"status": "pass"
},
"ladder/02-booleans/004-edge-on-edge-no-overlap": {
@@ -117,7 +117,7 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.010369929,
+ "seconds": 0.010931311,
"status": "pass"
},
"ladder/02-booleans/005-vertex-on-face-no-overlap": {
@@ -129,7 +129,7 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.043089276,
+ "seconds": 0.044740497,
"status": "pass"
},
"ladder/02-booleans/006-tangent-along-line-no-overlap": {
@@ -141,7 +141,7 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.015702342,
+ "seconds": 0.03648693,
"status": "pass"
},
"ladder/02-booleans/007-near-tangent-gap-1e-3": {
@@ -153,7 +153,7 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.044085553,
+ "seconds": 0.032671004,
"status": "pass"
},
"ladder/02-booleans/008-near-tangent-gap-1e-6": {
@@ -165,19 +165,19 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.028412443,
+ "seconds": 0.037264262,
"status": "pass"
},
"ladder/02-booleans/009-near-tangent-overlap-1e-3": {
"measured": {
- "area_mm2": 8800.00018857595,
+ "area_mm2": 8800.000188575948,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 47999.9886864612
+ "volume_mm3": 47999.98868646121
},
- "seconds": 0.0481886,
+ "seconds": 0.041053197,
"status": "pass"
},
"ladder/02-booleans/010-near-tangent-overlap-1e-6": {
@@ -189,67 +189,67 @@
"vertices": 8,
"volume_mm3": 48000.0
},
- "seconds": 0.029025343,
+ "seconds": 0.037161622,
"status": "pass"
},
"ladder/02-booleans/011-tangent-along-circle-through-hole": {
"measured": {
- "area_mm2": 9428.318515408751,
+ "area_mm2": 9428.318530719811,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 41716.81450698026
+ "volume_mm3": 41716.814692852844
},
- "seconds": 0.034977279,
+ "seconds": 0.076309047,
"status": "pass"
},
"ladder/02-booleans/012-tangent-along-circle-bowl": {
"measured": {
- "area_mm2": 9742.477897359224,
+ "area_mm2": 9742.477796081346,
"body_count": 1,
"edges": 17,
"faces": 8,
"vertices": 12,
- "volume_mm3": 42764.01195654861
+ "volume_mm3": 42764.01224382856
},
- "seconds": 0.059898023,
+ "seconds": 0.068907004,
"status": "pass"
},
"ladder/02-booleans/013-cut-across-cylinder-seam": {
"measured": {
- "area_mm2": 2036.8673139138011,
+ "area_mm2": 2036.867362638954,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 5888.550569284607
+ "volume_mm3": 5888.551106723224
},
- "seconds": 0.049629232,
+ "seconds": 0.059478055,
"status": "pass"
},
"ladder/02-booleans/014-cut-through-sphere-pole": {
"measured": {
- "area_mm2": 1332.0893143869712,
+ "area_mm2": 1332.0892833422135,
"body_count": 1,
"edges": 14,
"faces": 6,
"vertices": 10,
- "volume_mm3": 4110.944533826848
+ "volume_mm3": 4110.943748776394
},
- "seconds": 0.011976898,
+ "seconds": 0.024782143,
"status": "pass"
},
"ladder/02-booleans/015-knife-edge-wedge-cut": {
"measured": {
- "area_mm2": 6929.822128134708,
+ "area_mm2": 6929.822128134705,
"body_count": 1,
"edges": 9,
"faces": 5,
"vertices": 6,
- "volume_mm3": 24000.000000000007
+ "volume_mm3": 24000.000000000015
},
- "seconds": 0.011093645,
+ "seconds": 0.011570083,
"status": "pass"
},
"ladder/02-booleans/016-v-groove-pinches-bottom-to-line": {
@@ -259,45 +259,45 @@
"edges": 24,
"faces": 12,
"vertices": 16,
- "volume_mm3": 38400.000000000015
+ "volume_mm3": 38400.00000000002
},
- "seconds": 0.012047634,
+ "seconds": 0.012730153,
"status": "pass"
},
"ladder/02-booleans/017-cylinder-tangent-top-and-bottom": {
"measured": {
- "area_mm2": 11941.592611921053,
+ "area_mm2": 11941.59265358626,
"body_count": 2,
"edges": 24,
"faces": 12,
"vertices": 16,
- "volume_mm3": 29150.438046445848
+ "volume_mm3": 29150.444078121756
},
- "seconds": 0.023171327,
+ "seconds": 0.051785514,
"status": "pass"
},
"ladder/02-booleans/018-hole-tangent-to-side-face": {
"measured": {
- "area_mm2": 9428.31829497222,
+ "area_mm2": 9428.31853067088,
"body_count": 1,
"edges": 17,
"faces": 7,
"vertices": 10,
- "volume_mm3": 41716.81209239218
+ "volume_mm3": 41716.814692298256
},
- "seconds": 0.026474081,
+ "seconds": 0.058955827,
"status": "pass"
},
"ladder/02-booleans/019-notch-flush-with-end-face": {
"measured": {
- "area_mm2": 8800.000000000002,
+ "area_mm2": 8800.0,
"body_count": 1,
"edges": 24,
"faces": 10,
"vertices": 16,
- "volume_mm3": 32000.000000000015
+ "volume_mm3": 32000.000000000007
},
- "seconds": 0.007169783,
+ "seconds": 0.013683135,
"status": "pass"
},
"ladder/02-booleans/020-part-back-wall": {
@@ -307,973 +307,1137 @@
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 57000.0
+ "volume_mm3": 57000.000000000015
},
- "seconds": 0.012571045,
+ "seconds": 0.013224396,
"status": "pass"
},
"ladder/02-booleans/021-holes-touching-at-a-point": {
"measured": {
- "area_mm2": 9742.477564676688,
+ "area_mm2": 9742.477796064206,
"body_count": 1,
"edges": 17,
"faces": 8,
"vertices": 10,
- "volume_mm3": 44858.40494270982
+ "volume_mm3": 44858.40734615085
},
- "seconds": 0.0549919,
+ "seconds": 0.131438324,
"status": "pass"
},
"ladder/02-booleans/022-cylinder-grazing-a-hole-edge": {
"measured": {
- "area_mm2": 576.0597799448259,
+ "area_mm2": 576.0597790152967,
"body_count": 1,
"edges": 24,
"faces": 11,
"vertices": 16,
- "volume_mm3": 700.1694600993085
+ "volume_mm3": 700.1694662123119
},
- "seconds": 0.060724347,
+ "seconds": 0.087311782,
"status": "pass"
},
"ladder/02-booleans/023-lips-1e-4-off-the-walls-joined": {
"measured": {
- "area_mm2": 1610.939957683726,
+ "area_mm2": 1610.9399495961893,
"body_count": 1,
"edges": 54,
"faces": 22,
"vertices": 34,
- "volume_mm3": 769.4693261952389
+ "volume_mm3": 769.4689746947504
},
- "seconds": 0.132173954,
+ "seconds": 0.201061748,
"status": "pass"
},
"ladder/02-booleans/024-wall-halves-merged-into-a-flange": {
"measured": {
- "area_mm2": 9676.104640800102,
+ "area_mm2": 9676.105373078572,
"body_count": 1,
"edges": 9,
"faces": 6,
"vertices": 6,
- "volume_mm3": 37875.03682260403
+ "volume_mm3": 37875.04103167573
},
- "seconds": 0.236700862,
+ "seconds": 0.18248673,
"status": "pass"
},
"ladder/02-booleans/025-flush-chord-layers-joined": {
"measured": {
- "area_mm2": 19848.963867303115,
+ "area_mm2": 19848.964251059107,
"body_count": 1,
"edges": 86,
"faces": 30,
"vertices": 52,
- "volume_mm3": 24340.93465191528
+ "volume_mm3": 24340.93580402055
},
- "seconds": 1.355214364,
+ "seconds": 1.558780498,
"status": "pass"
},
"ladder/03-analytic-profiles/001-extrude-rect-with-arc-end": {
"measured": {
- "area_mm2": 10513.274682103463,
+ "area_mm2": 10513.274122905643,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 60566.37574264513
+ "volume_mm3": 60566.37061462199
},
- "seconds": 0.013373513,
+ "seconds": 0.014670293,
"status": "pass"
},
"ladder/03-analytic-profiles/002-extrude-annulus": {
"measured": {
- "area_mm2": 4712.3888135105635,
+ "area_mm2": 4712.388980399636,
"body_count": 1,
"edges": 6,
"faces": 4,
"vertices": 4,
- "volume_mm3": 14137.165496409769
+ "volume_mm3": 14137.166941179268
},
- "seconds": 0.05877949,
+ "seconds": 0.024407565,
"status": "pass"
},
"ladder/03-analytic-profiles/003-extrude-tapered-circle": {
"measured": {
- "area_mm2": 1679.0714571133199,
+ "area_mm2": 1679.071423483643,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 5247.894417424099
+ "volume_mm3": 5247.894567674972
},
- "seconds": 0.050194162,
+ "seconds": 0.024023754,
"status": "pass"
},
"ladder/03-analytic-profiles/004-revolve-full-off-axis": {
"measured": {
- "area_mm2": 7539.82227780291,
+ "area_mm2": 7539.822368642646,
"body_count": 1,
"edges": 6,
"faces": 4,
"vertices": 4,
- "volume_mm3": 28274.33099281954
+ "volume_mm3": 28274.333882357845
},
- "seconds": 0.064997043,
+ "seconds": 0.041726832,
"status": "pass"
},
"ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere": {
"measured": {
- "area_mm2": 3769.911189319725,
+ "area_mm2": 3769.9111843164546,
"body_count": 1,
"edges": 2,
"faces": 2,
"vertices": 2,
- "volume_mm3": 16755.16137194915
+ "volume_mm3": 16755.160819221863
},
- "seconds": 0.069528252,
+ "seconds": 0.030852929,
"status": "pass"
},
"ladder/03-analytic-profiles/006-revolve-partial-90": {
"measured": {
- "area_mm2": 1142.4774823972846,
+ "area_mm2": 1142.4777960589026,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 2356.1929112075295
+ "volume_mm3": 2356.1944900996414
},
- "seconds": 0.015891639,
+ "seconds": 0.010035898,
"status": "pass"
},
"ladder/03-analytic-profiles/007-revolve-180-touching-axis": {
"measured": {
- "area_mm2": 2249.3361006094165,
+ "area_mm2": 2249.336143135075,
"body_count": 1,
"edges": 6,
"faces": 4,
"vertices": 4,
- "volume_mm3": 7068.582941859537
+ "volume_mm3": 7068.583470572731
},
- "seconds": 0.014438734,
+ "seconds": 0.010468652,
"status": "pass"
},
"ladder/03-analytic-profiles/008-extrude-slot": {
"measured": {
- "area_mm2": 3656.63741233849,
+ "area_mm2": 3656.6370614755815,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 11141.594404248584
+ "volume_mm3": 11141.592653770153
},
- "seconds": 0.023430736,
+ "seconds": 0.011493074,
"status": "pass"
},
"ladder/03-analytic-profiles/009-part-boss-and-slot": {
"measured": {
- "area_mm2": 12164.778448487314,
+ "area_mm2": 12164.778684210796,
"body_count": 1,
"edges": 33,
"faces": 14,
"vertices": 22,
- "volume_mm3": 55605.309277598055
+ "volume_mm3": 55605.309649084316
},
- "seconds": 0.123637859,
+ "seconds": 0.060111465,
"status": "pass"
},
"ladder/03-analytic-profiles/010-revolve-horn-torus-270": {
"measured": {
- "area_mm2": 7211.92921002673,
+ "area_mm2": 7211.928814696445,
"body_count": 1,
"edges": 6,
"faces": 4,
"vertices": 4,
- "volume_mm3": 28932.185072957283
+ "volume_mm3": 28932.17610036333
},
- "seconds": 0.136088136,
+ "seconds": 0.060332475,
"status": "pass"
},
"ladder/04-spline-profiles/001-extrude-bezier-arch": {
"measured": {
- "area_mm2": 2766.836543476887,
+ "area_mm2": 2766.836554300913,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 8200.0
+ "volume_mm3": 8200.000000000002
},
- "seconds": 0.015382084,
+ "seconds": 0.019786321,
"status": "pass"
},
"ladder/04-spline-profiles/002-revolve-bezier-profile": {
"measured": {
- "area_mm2": 5856.9826422553115,
+ "area_mm2": 5856.982454483079,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 34131.153548347604
+ "volume_mm3": 34131.16018617699
},
- "seconds": 0.083683818,
+ "seconds": 0.069129293,
"status": "pass"
},
"ladder/04-spline-profiles/003-pipe-along-bezier": {
"measured": {
- "area_mm2": 605.9576565517693,
+ "area_mm2": 605.9576227938425,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 580.8255293341258
+ "volume_mm3": 580.8248814439473
},
- "seconds": 0.141310005,
+ "seconds": 0.110451419,
"status": "pass"
},
"ladder/04-spline-profiles/004-sweep-square-along-bezier": {
"measured": {
- "area_mm2": 771.5291970478809,
+ "area_mm2": 771.529196914377,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 739.5292097504819
+ "volume_mm3": 739.5292098648478
},
- "seconds": 0.041785332,
+ "seconds": 0.038770414,
"status": "pass"
},
"ladder/04-spline-profiles/005-loft-square-frustum": {
"measured": {
- "area_mm2": 5794.733192202055,
+ "area_mm2": 5794.733192202057,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 28000.000000000007
+ "volume_mm3": 28000.0
},
- "seconds": 0.01135179,
+ "seconds": 0.010337564,
"status": "pass"
},
"ladder/04-spline-profiles/006-loft-circle-frustum": {
"measured": {
- "area_mm2": 4551.172885600089,
+ "area_mm2": 4551.172806545445,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 21991.14802951055
+ "volume_mm3": 21991.148575014995
},
- "seconds": 0.058913074,
+ "seconds": 0.036088144,
"status": "pass"
},
"ladder/04-spline-profiles/007-loft-three-circles": {
"measured": {
- "area_mm2": 6453.967221806411,
+ "area_mm2": 6453.967215410327,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 23457.221256199402
+ "volume_mm3": 23457.225146359866
},
- "seconds": 0.072000761,
+ "seconds": 0.036542851,
"status": "pass"
},
"ladder/04-spline-profiles/008-loft-square-to-circle": {
"measured": {
- "area_mm2": 5454.34068438542,
+ "area_mm2": 5454.34057365124,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 26310.54362092466
+ "volume_mm3": 26310.543837045305
},
- "seconds": 0.027190644,
+ "seconds": 0.021237898,
"status": "pass"
},
"ladder/04-spline-profiles/009-extrude-periodic-fit-spline": {
"measured": {
- "area_mm2": 3698.6023993383496,
+ "area_mm2": 3698.6024347856,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 12281.011858436344
+ "volume_mm3": 12281.012021749822
},
- "seconds": 0.035405874,
+ "seconds": 0.030974162,
"status": "pass"
},
"ladder/04-spline-profiles/010-part-bezier-window": {
"measured": {
- "area_mm2": 12389.018284526814,
+ "area_mm2": 12389.018511230937,
"body_count": 1,
"edges": 39,
"faces": 16,
"vertices": 26,
- "volume_mm3": 54273.309277598055
+ "volume_mm3": 54273.309649084316
},
- "seconds": 0.130843499,
+ "seconds": 0.09852879,
"status": "pass"
},
"ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined": {
"measured": {
- "area_mm2": 121420.35300591686,
+ "area_mm2": 121420.3527659641,
"body_count": 1,
"edges": 1096,
"faces": 388,
"vertices": 584,
- "volume_mm3": 44443.494125231206
+ "volume_mm3": 44443.49783386934
},
- "seconds": 1.375785917,
+ "seconds": 1.323453666,
"status": "pass"
},
"ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad": {
"measured": {
- "area_mm2": 13275.843011957519,
+ "area_mm2": 13275.842713594542,
"body_count": 1,
"edges": 86,
"faces": 31,
"vertices": 57,
- "volume_mm3": 100193.008857701
+ "volume_mm3": 100193.003036287
},
- "seconds": 0.681137226,
+ "seconds": 0.462630738,
"status": "pass"
},
"ladder/05-holes-and-taps/001-simple-through": {
"measured": {
- "area_mm2": 9271.23888918968,
+ "area_mm2": 9271.238898031577,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 46429.20345247036
+ "volume_mm3": 46429.203673141754
},
- "seconds": 0.032915588,
+ "seconds": 0.023289285,
"status": "pass"
},
"ladder/05-holes-and-taps/002-simple-blind-flat": {
"measured": {
- "area_mm2": 9114.159273842968,
+ "area_mm2": 9114.159265368047,
"body_count": 1,
"edges": 15,
"faces": 8,
"vertices": 10,
- "volume_mm3": 47214.60167821204
+ "volume_mm3": 47214.60183659343
},
- "seconds": 0.045874139,
+ "seconds": 0.028718021,
"status": "pass"
},
"ladder/05-holes-and-taps/003-drilled-blind-118": {
"measured": {
- "area_mm2": 9127.246594228827,
+ "area_mm2": 9127.24662177053,
"body_count": 1,
"edges": 17,
"faces": 8,
"vertices": 12,
- "volume_mm3": 47135.94953558977
+ "volume_mm3": 47135.94936549673
},
- "seconds": 0.044029664,
+ "seconds": 0.029737147,
"status": "pass"
},
"ladder/05-holes-and-taps/004-counterbore": {
"measured": {
- "area_mm2": 9234.733473850809,
+ "area_mm2": 9234.733591415143,
"body_count": 1,
"edges": 18,
"faces": 9,
"vertices": 12,
- "volume_mm3": 46926.50439234107
+ "volume_mm3": 46926.50522394999
},
- "seconds": 0.050545684,
+ "seconds": 0.048951001,
"status": "pass"
},
"ladder/05-holes-and-taps/005-countersink": {
"measured": {
- "area_mm2": 9122.958530910642,
+ "area_mm2": 9122.958560242205,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 47219.57154291447
+ "volume_mm3": 47219.57183623009
},
- "seconds": 0.088605524,
+ "seconds": 0.058968434,
"status": "pass"
},
"ladder/05-holes-and-taps/006-tapped-m6-through": {
"measured": {
- "area_mm2": 9074.889289958897,
+ "area_mm2": 9074.889357183944,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47607.30072936878
+ "volume_mm3": 47607.30091826685
},
- "seconds": 0.017341919,
+ "seconds": 0.025773972,
"status": "pass"
},
"ladder/05-holes-and-taps/007-tapped-m8-blind": {
"measured": {
- "area_mm2": 9062.405544647674,
+ "area_mm2": 9062.405554141464,
"body_count": 1,
"edges": 17,
"faces": 8,
"vertices": 12,
- "volume_mm3": 47539.467162202374
+ "volume_mm3": 47539.467413300634
},
- "seconds": 0.057993293,
+ "seconds": 0.031634357,
"status": "pass"
},
"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face": {
"measured": {
- "area_mm2": 10551.678983923912,
+ "area_mm2": 10551.679156127118,
"body_count": 1,
"edges": 6,
"faces": 4,
"vertices": 4,
- "volume_mm3": 74844.80869901458
+ "volume_mm3": 74844.81205246755
},
- "seconds": 0.130425609,
+ "seconds": 0.134095986,
"status": "pass"
},
"ladder/05-holes-and-taps/009-hole-0.5-from-edge": {
"measured": {
- "area_mm2": 9271.238661980013,
+ "area_mm2": 9271.238898086272,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 46429.20147858148
+ "volume_mm3": 46429.203673578886
},
- "seconds": 0.034376012,
+ "seconds": 0.036219136,
"status": "pass"
},
"ladder/05-holes-and-taps/010-hole-tangent-to-end-face": {
"measured": {
- "area_mm2": 9271.238824131646,
+ "area_mm2": 9271.238898072632,
"body_count": 1,
"edges": 17,
"faces": 7,
"vertices": 10,
- "volume_mm3": 46429.202650315056
+ "volume_mm3": 46429.20367342494
},
- "seconds": 0.035765667,
+ "seconds": 0.024374668,
"status": "pass"
},
"ladder/05-holes-and-taps/011-crossing-holes-steinmetz": {
"measured": {
- "area_mm2": 9970.796002655847,
+ "area_mm2": 9970.796457943112,
"body_count": 1,
"edges": 27,
"faces": 10,
"vertices": 17,
- "volume_mm3": 43954.275881084504
+ "volume_mm3": 43954.27736739679
},
- "seconds": 0.102376271,
+ "seconds": 0.078283505,
"status": "pass"
},
"ladder/05-holes-and-taps/012-crossing-tapped-holes-offset": {
"measured": {
- "area_mm2": 9586.62063280522,
+ "area_mm2": 9586.620653596627,
"body_count": 1,
"edges": 21,
"faces": 8,
"vertices": 14,
- "volume_mm3": 46870.21851307568
+ "volume_mm3": 46870.21907684049
},
- "seconds": 0.112783624,
+ "seconds": 0.127043113,
"status": "pass"
},
"ladder/05-holes-and-taps/013-part-holes": {
"measured": {
- "area_mm2": 13115.21289450834,
+ "area_mm2": 13115.213361131606,
"body_count": 1,
"edges": 48,
"faces": 20,
"vertices": 32,
- "volume_mm3": 53470.419311175334
+ "volume_mm3": 53470.420668720755
+ },
+ "seconds": 0.256105118,
+ "status": "pass"
+ },
+ "ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through": {
+ "measured": {
+ "area_mm2": 9079.83876494227,
+ "body_count": 1,
+ "edges": 15,
+ "faces": 7,
+ "vertices": 10,
+ "volume_mm3": 47590.57022271537
+ },
+ "seconds": 0.040846202,
+ "status": "pass"
+ },
+ "ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind": {
+ "measured": {
+ "area_mm2": 8971.216799624277,
+ "body_count": 1,
+ "edges": 15,
+ "faces": 8,
+ "vertices": 10,
+ "volume_mm3": 47766.71711050138
+ },
+ "seconds": 0.033597905,
+ "status": "pass"
+ },
+ "ladder/05-holes-and-taps/016-tapped-rc-1-2-through": {
+ "measured": {
+ "area_mm2": 9419.270743873743,
+ "body_count": 1,
+ "edges": 15,
+ "faces": 7,
+ "vertices": 10,
+ "volume_mm3": 43134.30129811671
+ },
+ "seconds": 0.028470867,
+ "status": "pass"
+ },
+ "ladder/05-holes-and-taps/017-tapped-1-4-npt-through": {
+ "measured": {
+ "area_mm2": 9296.807535241649,
+ "body_count": 1,
+ "edges": 15,
+ "faces": 7,
+ "vertices": 10,
+ "volume_mm3": 46150.81929413248
},
- "seconds": 0.279797849,
+ "seconds": 0.027692751,
"status": "pass"
},
"ladder/06-threads/001-external-m10-full": {
"measured": {
- "area_mm2": 1528.998539117189,
+ "area_mm2": 1528.9985505873308,
"body_count": 1,
"edges": 252,
"faces": 86,
"vertices": 168,
- "volume_mm3": 1954.2449542776249
+ "volume_mm3": 1954.2452430647338
},
- "seconds": 2.12811212,
+ "seconds": 1.689697866,
"status": "pass"
},
"ladder/06-threads/002-external-m10x1-fine": {
"measured": {
- "area_mm2": 1581.5205208524822,
+ "area_mm2": 1581.5205078417318,
"body_count": 1,
"edges": 372,
"faces": 126,
"vertices": 248,
- "volume_mm3": 2081.899948214229
+ "volume_mm3": 2081.9002076225224
},
- "seconds": 2.625646547,
+ "seconds": 2.534402291,
"status": "pass"
},
"ladder/06-threads/003-external-m10-partial-length": {
"measured": {
- "area_mm2": 1314.9630494174853,
+ "area_mm2": 1314.9630292496186,
"body_count": 1,
"edges": 132,
"faces": 46,
"vertices": 88,
- "volume_mm3": 2155.2201253347134
+ "volume_mm3": 2155.219871329352
},
- "seconds": 1.088309306,
+ "seconds": 0.85471988,
"status": "pass"
},
"ladder/06-threads/004-external-m10-to-shoulder": {
"measured": {
- "area_mm2": 2047.0228358498966,
+ "area_mm2": 2047.0229459058442,
"body_count": 1,
"edges": 213,
"faces": 74,
"vertices": 142,
- "volume_mm3": 3648.5291584977404
+ "volume_mm3": 3648.5299273785768
},
- "seconds": 2.143927615,
+ "seconds": 1.403150704,
"status": "pass"
},
"ladder/06-threads/005-internal-m10-through": {
"measured": {
- "area_mm2": 4978.101312600045,
+ "area_mm2": 4978.101312130874,
"body_count": 1,
"edges": 186,
"faces": 64,
"vertices": 124,
- "volume_mm3": 16688.181727949996
+ "volume_mm3": 16688.18167960171
},
- "seconds": 1.871629553,
+ "seconds": 1.161250254,
"status": "pass"
},
"ladder/06-threads/006-external-m10-into-chamfer": {
"measured": {
- "area_mm2": 1508.108891537519,
+ "area_mm2": 1508.108885047644,
"body_count": 1,
"edges": 252,
"faces": 86,
"vertices": 168,
- "volume_mm3": 1948.6927071991595
+ "volume_mm3": 1948.6927173387744
},
- "seconds": 1.919749317,
+ "seconds": 1.712647333,
"status": "pass"
},
"ladder/06-threads/007-external-m10-at-filleted-shoulder": {
"measured": {
- "area_mm2": 2018.7759360368239,
+ "area_mm2": 2018.7759934430132,
"body_count": 1,
"edges": 203,
"faces": 71,
"vertices": 135,
- "volume_mm3": 3668.9704031534766
+ "volume_mm3": 3668.971306096839
},
- "seconds": 1.964063929,
+ "seconds": 1.437495352,
"status": "pass"
},
"ladder/06-threads/008-multi-start-thread": {
"measured": {
- "area_mm2": 1532.2853732955155,
+ "area_mm2": 1532.2853638958047,
"body_count": 1,
"edges": 264,
"faces": 90,
"vertices": 176,
- "volume_mm3": 1954.245227235153
+ "volume_mm3": 1954.2452070488298
},
- "seconds": 3.706373342,
+ "seconds": 3.07364605,
"status": "pass"
},
"ladder/06-threads/009-thread-runout-length": {
"measured": {
- "area_mm2": 2023.0564304737718,
+ "area_mm2": 2023.0586516883154,
"body_count": 1,
"edges": 214,
"faces": 77,
"vertices": 140,
- "volume_mm3": 3673.436434421382
+ "volume_mm3": 3673.4420095262312
},
- "seconds": 2.202591408,
+ "seconds": 1.43947478,
"status": "pass"
},
"ladder/06-threads/010-part-threaded-boss": {
"measured": {
- "area_mm2": 13318.76579174848,
+ "area_mm2": 13318.766396825838,
"body_count": 1,
"edges": 111,
"faces": 41,
"vertices": 74,
- "volume_mm3": 53208.187629619366
+ "volume_mm3": 53208.19063020747
},
- "seconds": 1.462190101,
+ "seconds": 0.774176125,
"status": "pass"
},
"ladder/06-threads/011-external-tr20x4": {
"measured": {
- "area_mm2": 3008.5109289311276,
+ "area_mm2": 3008.510981905842,
"body_count": 1,
"edges": 84,
"faces": 30,
"vertices": 56,
- "volume_mm3": 6065.464162834598
+ "volume_mm3": 6065.464859905014
},
- "seconds": 0.955700965,
+ "seconds": 0.647622949,
"status": "pass"
},
"ladder/06-threads/012-external-acme-3-4-6": {
"measured": {
- "area_mm2": 2943.7315602592976,
+ "area_mm2": 2943.7315979562527,
"body_count": 1,
"edges": 84,
"faces": 30,
"vertices": 56,
- "volume_mm3": 5689.271052485101
+ "volume_mm3": 5689.271646531861
},
- "seconds": 0.83862527,
+ "seconds": 0.634242439,
"status": "pass"
},
"ladder/06-threads/013-external-s20x4": {
"measured": {
- "area_mm2": 3376.925753383339,
+ "area_mm2": 3376.925747881656,
"body_count": 1,
"edges": 87,
"faces": 31,
"vertices": 58,
- "volume_mm3": 5454.578654614414
+ "volume_mm3": 5454.5786474564175
},
- "seconds": 0.945493006,
+ "seconds": 0.664539235,
"status": "pass"
},
"ladder/06-threads/014-external-buttress-asme-1.5-8": {
"measured": {
- "area_mm2": 5916.2769083388575,
+ "area_mm2": 5916.276939068178,
"body_count": 1,
"edges": 87,
"faces": 31,
"vertices": 58,
- "volume_mm3": 19631.080967830752
+ "volume_mm3": 19631.08121878226
},
- "seconds": 1.347177632,
+ "seconds": 0.715733395,
"status": "pass"
},
"ladder/06-threads/015-internal-tr20x4-nut": {
"measured": {
- "area_mm2": 9076.623586009078,
+ "area_mm2": 9076.623628295467,
"body_count": 1,
"edges": 96,
"faces": 34,
"vertices": 64,
- "volume_mm3": 32097.519799715614
+ "volume_mm3": 32097.52028280751
},
- "seconds": 1.199732826,
+ "seconds": 0.69492115,
"status": "pass"
},
"ladder/06-threads/016-external-m10-left-hand": {
"measured": {
- "area_mm2": 1528.998538562401,
+ "area_mm2": 1528.9985498697533,
"body_count": 1,
"edges": 252,
"faces": 86,
"vertices": 168,
- "volume_mm3": 1954.2449602433921
+ "volume_mm3": 1954.2452430252965
},
- "seconds": 1.689990672,
+ "seconds": 1.625940272,
"status": "pass"
},
"ladder/06-threads/017-external-m10-chamfered-tip": {
"measured": {
- "area_mm2": 1492.9858770288445,
+ "area_mm2": 1492.9858778452715,
"body_count": 1,
"edges": 258,
"faces": 88,
"vertices": 172,
- "volume_mm3": 1945.3543465077544
+ "volume_mm3": 1945.3544847128642
},
- "seconds": 3.048846709,
+ "seconds": 3.340196035,
"status": "pass"
},
"ladder/06-threads/018-external-m10-both-hands": {
"measured": {
- "area_mm2": 1418.5862919067272,
+ "area_mm2": 1418.5863348764333,
"body_count": 1,
"edges": 486,
"faces": 204,
"vertices": 324,
- "volume_mm3": 1804.9238443319966
+ "volume_mm3": 1804.9241321476034
},
- "seconds": 7.75550865,
+ "seconds": 6.515191917,
"status": "pass"
},
"ladder/06-threads/019-external-tr40x14-p7-two-start": {
"measured": {
- "area_mm2": 11049.102083229865,
+ "area_mm2": 11049.102020992848,
+ "body_count": 1,
+ "edges": 96,
+ "faces": 34,
+ "vertices": 64,
+ "volume_mm3": 43534.4823482271
+ },
+ "seconds": 1.195948426,
+ "status": "pass"
+ },
+ "ladder/06-threads/020-external-g-1-2": {
+ "measured": {
+ "area_mm2": 1819.8329652683872,
+ "body_count": 1,
+ "edges": 84,
+ "faces": 30,
+ "vertices": 56,
+ "volume_mm3": 3355.922715408856
+ },
+ "seconds": 0.694554731,
+ "status": "pass"
+ },
+ "ladder/06-threads/021-internal-rp-1-2": {
+ "measured": {
+ "area_mm2": 5528.399867579505,
"body_count": 1,
"edges": 96,
"faces": 34,
"vertices": 64,
- "volume_mm3": 43534.483316522135
+ "volume_mm3": 14061.220084540242
+ },
+ "seconds": 0.684860518,
+ "status": "pass"
+ },
+ "ladder/06-threads/022-external-r-1-2-taper": {
+ "measured": {
+ "area_mm2": 2892.93092831753,
+ "body_count": 1,
+ "edges": 122,
+ "faces": 52,
+ "vertices": 72,
+ "volume_mm3": 8233.025967847225
+ },
+ "seconds": 1.3442539230000001,
+ "status": "pass"
+ },
+ "ladder/06-threads/023-external-1-2-npt": {
+ "measured": {
+ "area_mm2": 3317.0130177354845,
+ "body_count": 1,
+ "edges": 144,
+ "faces": 63,
+ "vertices": 83,
+ "volume_mm3": 8227.34635260655
+ },
+ "seconds": 1.619294352,
+ "status": "fail"
+ },
+ "ladder/06-threads/024-internal-rc-1-2-taper": {
+ "measured": {
+ "area_mm2": 6149.480584088805,
+ "body_count": 1,
+ "edges": 130,
+ "faces": 55,
+ "vertices": 77,
+ "volume_mm3": 17217.301948586937
+ },
+ "seconds": 1.382961955,
+ "status": "pass"
+ },
+ "ladder/06-threads/025-external-s20x4-steep-flank-end-to-shoulder": {
+ "measured": {
+ "area_mm2": 5883.04322341494,
+ "body_count": 1,
+ "edges": 102,
+ "faces": 37,
+ "vertices": 68,
+ "volume_mm3": 13986.200402957777
+ },
+ "seconds": 0.776015625,
+ "status": "pass"
+ },
+ "ladder/06-threads/026-external-s20x4-steep-flank-start-to-shoulder": {
+ "measured": {
+ "area_mm2": 5793.40788472209,
+ "body_count": 1,
+ "edges": 99,
+ "faces": 36,
+ "vertices": 66,
+ "volume_mm3": 14054.201948388452
+ },
+ "seconds": 0.745645116,
+ "status": "pass"
+ },
+ "ladder/06-threads/027-external-m10-chamfered-start": {
+ "measured": {
+ "area_mm2": 1510.9922210921723,
+ "body_count": 1,
+ "edges": 255,
+ "faces": 87,
+ "vertices": 170,
+ "volume_mm3": 1949.7999227857772
},
- "seconds": 1.830871199,
+ "seconds": 2.525970287,
+ "status": "pass"
+ },
+ "ladder/06-threads/028-external-tr20x4-chamfer-30-deg-2.5-deep": {
+ "measured": {
+ "area_mm2": 2626.5766115173265,
+ "body_count": 1,
+ "edges": 90,
+ "faces": 32,
+ "vertices": 60,
+ "volume_mm3": 5769.1287901433325
+ },
+ "seconds": 1.310968707,
+ "status": "pass"
+ },
+ "ladder/06-threads/029-external-tr20x4-chamfer-needs-depth": {
+ "seconds": 0.656914247,
+ "status": "pass"
+ },
+ "ladder/06-threads/030-square-thread-refused": {
+ "seconds": 0.017698501,
"status": "pass"
},
"ladder/07-fillets/001-single-edge-r5": {
"measured": {
- "area_mm2": 8660.508890351646,
+ "area_mm2": 8660.508806219164,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47678.09530101598
+ "volume_mm3": 47678.09724513767
},
- "seconds": 0.016262088,
+ "seconds": 0.008276702,
"status": "pass"
},
"ladder/07-fillets/002-four-vertical-edges-r5": {
"measured": {
- "area_mm2": 8585.398552475748,
+ "area_mm2": 8585.398163537797,
"body_count": 1,
"edges": 24,
"faces": 10,
"vertices": 16,
- "volume_mm3": 47570.79943563683
+ "volume_mm3": 47570.796327937685
},
- "seconds": 0.026656146,
+ "seconds": 0.016656302,
"status": "pass"
},
"ladder/07-fillets/003-tangent-chain-r3": {
"measured": {
- "area_mm2": 8334.925890321756,
+ "area_mm2": 8334.925469219002,
"body_count": 1,
"edges": 40,
"faces": 18,
"vertices": 24,
- "volume_mm3": 47209.22370148293
+ "volume_mm3": 47209.224453421455
},
- "seconds": 0.080296774,
+ "seconds": 0.075259768,
"status": "pass"
},
"ladder/07-fillets/004-convex-and-concave-r5": {
"measured": {
- "area_mm2": 4514.159503196192,
+ "area_mm2": 4514.159265383247,
"body_count": 1,
"edges": 24,
"faces": 10,
"vertices": 16,
- "volume_mm3": 14000.002049410516
+ "volume_mm3": 14000.000000143285
},
- "seconds": 0.020970963,
+ "seconds": 0.025016285,
"status": "pass"
},
"ladder/07-fillets/005-variable-r5-to-r1": {
"measured": {
- "area_mm2": 8717.217924043853,
+ "area_mm2": 8717.217924050128,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47866.93985730924
+ "volume_mm3": 47866.939865273875
},
- "seconds": 0.020180862,
+ "seconds": 0.020330867,
"status": "pass"
},
"ladder/07-fillets/006-variable-r5-to-zero": {
"measured": {
- "area_mm2": 8730.326099374339,
+ "area_mm2": 8730.326099306438,
"body_count": 1,
"edges": 14,
"faces": 7,
"vertices": 9,
- "volume_mm3": 47892.693434961286
+ "volume_mm3": 47892.69344121365
},
- "seconds": 0.009438084,
+ "seconds": 0.01733797,
"status": "pass"
},
"ladder/07-fillets/007-variable-r5-to-1e-3": {
"measured": {
- "area_mm2": 8730.313207916415,
+ "area_mm2": 8730.313207922401,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47892.67196922709
+ "volume_mm3": 47892.671975647136
},
- "seconds": 0.018291972,
+ "seconds": 0.009474805,
"status": "pass"
},
"ladder/07-fillets/008-constant-r1e-3": {
"measured": {
- "area_mm2": 8799.9742473454,
+ "area_mm2": 8799.974247350745,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47999.99997963964
+ "volume_mm3": 47999.99998708315
},
- "seconds": 0.023888675,
+ "seconds": 0.018851642,
"status": "pass"
},
"ladder/07-fillets/009-corner-three-equal-r5": {
"measured": {
- "area_mm2": 8522.843213284448,
+ "area_mm2": 8522.842842060318,
"body_count": 1,
"edges": 21,
"faces": 10,
"vertices": 13,
- "volume_mm3": 47377.122731304844
+ "volume_mm3": 47377.12002653465
},
- "seconds": 0.022659899,
+ "seconds": 0.031523042,
"status": "pass"
},
"ladder/07-fillets/010-corner-unequal-r7-r3": {
"measured": {
- "area_mm2": 8589.124659133073,
+ "area_mm2": 8589.124242980084,
"body_count": 1,
"edges": 22,
"faces": 10,
"vertices": 14,
- "volume_mm3": 47604.38618238413
+ "volume_mm3": 47604.38434765742
},
- "seconds": 0.037027754,
+ "seconds": 0.024238201,
"status": "pass"
},
"ladder/07-fillets/011-chain-ending-at-corner": {
"measured": {
- "area_mm2": 8571.128308024523,
+ "area_mm2": 8571.12825048213,
"body_count": 1,
"edges": 17,
"faces": 8,
"vertices": 11,
- "volume_mm3": 47475.477375283306
+ "volume_mm3": 47475.4793194927
},
- "seconds": 0.018757607,
+ "seconds": 0.011257216,
"status": "pass"
},
"ladder/07-fillets/012-variable-into-rounded-corner": {
"measured": {
- "area_mm2": 8665.870632567001,
+ "area_mm2": 8665.870097489847,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 47754.87775109653
+ "volume_mm3": 47754.87240844197
},
- "seconds": 0.059642694,
+ "seconds": 0.050985104,
"status": "pass"
},
"ladder/07-fillets/013-corner-setback": {
"measured": {
- "area_mm2": 8509.311157473603,
+ "area_mm2": 8509.310862681297,
"body_count": 1,
"edges": 36,
"faces": 15,
"vertices": 23,
- "volume_mm3": 47325.93695835596
+ "volume_mm3": 47325.93514010273
},
- "seconds": 0.116555677,
+ "seconds": 0.062429472,
"status": "pass"
},
"ladder/07-fillets/014-curved-edge-r2": {
"measured": {
- "area_mm2": 1829.240960227803,
+ "area_mm2": 1829.2409621331146,
"body_count": 1,
"edges": 5,
"faces": 4,
"vertices": 3,
- "volume_mm3": 6231.659066701741
+ "volume_mm3": 6231.659467501777
},
- "seconds": 0.078144443,
+ "seconds": 0.047797086,
"status": "pass"
},
"ladder/07-fillets/015-corner-g2-patch": {
"measured": {
- "area_mm2": 8520.38925544218,
+ "area_mm2": 8520.388941406904,
"body_count": 1,
"edges": 24,
"faces": 10,
"vertices": 16,
- "volume_mm3": 47370.10741440046
- },
- "seconds": 2.184099933,
- "status": "pass"
- },
- "ladder/07-fillets/019-concave-corner-g2-patch": {
- "measured": {
- "area_mm2": 8702.800595617835,
- "body_count": 1,
- "edges": 33,
- "faces": 13,
- "vertices": 22,
- "volume_mm3": 44254.3419135911
+ "volume_mm3": 47370.10556764398
},
- "seconds": 2.217877403,
+ "seconds": 2.172589317,
"status": "pass"
},
"ladder/07-fillets/016-corner-three-sequential-r5-r3-r7": {
- "seconds": 0.045599545,
+ "seconds": 0.053107612,
"status": "pass"
},
"ladder/07-fillets/017-part-rounds": {
"measured": {
- "area_mm2": 12905.663516135399,
+ "area_mm2": 12905.663645271128,
"body_count": 1,
"edges": 59,
"faces": 24,
"vertices": 39,
- "volume_mm3": 53151.0192291965
+ "volume_mm3": 53151.022090002196
},
- "seconds": 0.689812087,
+ "seconds": 0.479855299,
"status": "pass"
},
"ladder/07-fillets/018-corner-three-sequential-r5-r3-r2": {
"measured": {
- "area_mm2": 8591.675261485441,
+ "area_mm2": 8591.675008996122,
"body_count": 1,
"edges": 24,
"faces": 11,
"vertices": 15,
- "volume_mm3": 47589.770109309655
+ "volume_mm3": 47589.770467263734
},
- "seconds": 0.080235318,
+ "seconds": 0.06135609,
+ "status": "pass"
+ },
+ "ladder/07-fillets/019-concave-corner-g2-patch": {
+ "measured": {
+ "area_mm2": 8702.800522231322,
+ "body_count": 1,
+ "edges": 33,
+ "faces": 13,
+ "vertices": 22,
+ "volume_mm3": 44254.34116127434
+ },
+ "seconds": 2.083591798,
"status": "pass"
},
"ladder/08-chamfers/001-equal-5": {
"measured": {
- "area_mm2": 8599.264068703942,
+ "area_mm2": 8599.26406871193,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47250.000000000015
+ "volume_mm3": 47249.99999999999
},
- "seconds": 0.011586527,
+ "seconds": 0.011874723,
"status": "pass"
},
"ladder/08-chamfers/002-two-distances-5-3": {
"measured": {
- "area_mm2": 8654.857113680613,
+ "area_mm2": 8654.857113690718,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47550.00000001157
+ "volume_mm3": 47549.99999999999
},
- "seconds": 0.023819586,
+ "seconds": 0.012467878,
"status": "pass"
},
"ladder/08-chamfers/003-distance-angle-5-30": {
"measured": {
- "area_mm2": 8658.771324025132,
+ "area_mm2": 8658.771324027146,
"body_count": 1,
"edges": 15,
"faces": 7,
"vertices": 10,
- "volume_mm3": 47566.987298072774
+ "volume_mm3": 47566.98729810778
},
- "seconds": 0.011581759,
+ "seconds": 0.011893235,
"status": "pass"
},
"ladder/08-chamfers/004-corner-three-equal-3": {
@@ -1285,7 +1449,7 @@
"vertices": 14,
"volume_mm3": 47480.25
},
- "seconds": 0.009050177,
+ "seconds": 0.018004693,
"status": "pass"
},
"ladder/08-chamfers/005-corner-two-mitred-3": {
@@ -1295,69 +1459,69 @@
"edges": 17,
"faces": 8,
"vertices": 11,
- "volume_mm3": 47559.0
+ "volume_mm3": 47558.99999999999
},
- "seconds": 0.008041451,
+ "seconds": 0.014861284,
"status": "pass"
},
"ladder/08-chamfers/006-curved-edge-2": {
"measured": {
- "area_mm2": 1806.138314620597,
+ "area_mm2": 1806.1383362576198,
"body_count": 1,
"edges": 5,
"faces": 4,
"vertices": 3,
- "volume_mm3": 6165.898978570243
+ "volume_mm3": 6165.899181475064
},
- "seconds": 0.069695981,
+ "seconds": 0.059633056,
"status": "pass"
},
"ladder/08-chamfers/007-chamfer-then-fillets": {
"measured": {
- "area_mm2": 8652.794170649633,
+ "area_mm2": 8652.79420663156,
"body_count": 1,
"edges": 21,
"faces": 9,
"vertices": 14,
- "volume_mm3": 47700.04681392183
+ "volume_mm3": 47700.04718731957
},
- "seconds": 0.029079455,
+ "seconds": 0.031264128,
"status": "pass"
},
"ladder/08-chamfers/008-part-chamfers": {
"measured": {
- "area_mm2": 12800.622976693989,
+ "area_mm2": 12800.623144562962,
"body_count": 1,
"edges": 64,
"faces": 26,
"vertices": 42,
- "volume_mm3": 53006.93294467868
+ "volume_mm3": 53006.936546270575
},
- "seconds": 0.749081818,
+ "seconds": 0.681389055,
"status": "pass"
},
"ladder/09-shells-and-offsets/001-box-open-top-t2": {
"measured": {
- "area_mm2": 12112.000000000002,
+ "area_mm2": 12112.0,
"body_count": 1,
"edges": 24,
"faces": 11,
"vertices": 16,
"volume_mm3": 11712.00000000001
},
- "seconds": 0.017030877,
+ "seconds": 0.008805361,
"status": "pass"
},
"ladder/09-shells-and-offsets/002-cylinder-open-top-t1": {
"measured": {
- "area_mm2": 4153.185490793196,
+ "area_mm2": 4153.185488045601,
"body_count": 1,
"edges": 6,
"faces": 5,
"vertices": 4,
- "volume_mm3": 2045.1781194378996
+ "volume_mm3": 2045.1768174685462
},
- "seconds": 0.102052253,
+ "seconds": 0.077255283,
"status": "pass"
},
"ladder/09-shells-and-offsets/003-tube-two-open-faces": {
@@ -1367,69 +1531,69 @@
"edges": 24,
"faces": 10,
"vertices": 16,
- "volume_mm3": 7680.000000000007
+ "volume_mm3": 7680.0000000000055
},
- "seconds": 0.017605072,
+ "seconds": 0.008893778,
"status": "pass"
},
"ladder/09-shells-and-offsets/004-thin-wall-0.2": {
"measured": {
- "area_mm2": 12728.320000000002,
+ "area_mm2": 12728.32,
"body_count": 1,
"edges": 24,
"faces": 11,
"vertices": 16,
- "volume_mm3": 1268.8319999999949
+ "volume_mm3": 1268.8319999999985
},
- "seconds": 0.017360494,
+ "seconds": 0.017061888,
"status": "pass"
},
"ladder/09-shells-and-offsets/005-shell-rounds-r5-t2": {
"measured": {
- "area_mm2": 11804.69049328623,
+ "area_mm2": 11804.690170097561,
"body_count": 1,
"edges": 48,
"faces": 19,
"vertices": 32,
- "volume_mm3": 11421.860960200946
+ "volume_mm3": 11421.858317494805
},
- "seconds": 0.173842021,
+ "seconds": 0.070876927,
"status": "pass"
},
"ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2": {
"measured": {
- "area_mm2": 12075.946992402418,
+ "area_mm2": 12075.946891509966,
"body_count": 1,
"edges": 36,
"faces": 15,
"vertices": 24,
- "volume_mm3": 11694.832919801527
+ "volume_mm3": 11694.831853512045
},
- "seconds": 0.059772023,
+ "seconds": 0.039572847,
"status": "pass"
},
"ladder/09-shells-and-offsets/007-offset-top-face-5": {
"measured": {
- "area_mm2": 9800.000000000004,
+ "area_mm2": 9800.000000000025,
"body_count": 1,
"edges": 12,
"faces": 6,
"vertices": 8,
- "volume_mm3": 60000.00000000002
+ "volume_mm3": 60000.00000000003
},
- "seconds": 0.016440553,
+ "seconds": 0.01670219,
"status": "pass"
},
"ladder/09-shells-and-offsets/008-offset-cylinder-wall-2": {
"measured": {
- "area_mm2": 2412.743113705001,
+ "area_mm2": 2412.743157962007,
"body_count": 1,
"edges": 3,
"faces": 3,
"vertices": 2,
- "volume_mm3": 9047.786411660763
+ "volume_mm3": 9047.786842389623
},
- "seconds": 0.075273098,
+ "seconds": 0.056818192,
"status": "pass"
},
"ladder/09-shells-and-offsets/009-shell-outside-t2": {
@@ -1439,33 +1603,33 @@
"edges": 24,
"faces": 11,
"vertices": 16,
- "volume_mm3": 13952.000000000015
+ "volume_mm3": 13951.999999999996
},
- "seconds": 0.037942031,
+ "seconds": 0.017403634,
"status": "pass"
},
"ladder/09-shells-and-offsets/010-shell-under-rounded-top": {
"measured": {
- "area_mm2": 11769.84062599412,
+ "area_mm2": 11769.840596765922,
"body_count": 1,
"edges": 40,
"faces": 19,
"vertices": 24,
- "volume_mm3": 11375.174354868088
+ "volume_mm3": 11375.174413984334
},
- "seconds": 0.10510739,
+ "seconds": 0.078774667,
"status": "pass"
},
"ladder/09-shells-and-offsets/011-part-shell": {
"measured": {
- "area_mm2": 20922.653935613285,
+ "area_mm2": 20922.655884939035,
"body_count": 1,
"edges": 140,
"faces": 55,
"vertices": 92,
- "volume_mm3": 15397.69748736967
+ "volume_mm3": 15397.700273419785
},
- "seconds": 1.077868685,
+ "seconds": 0.965141641,
"status": "pass"
},
"ladder/09-shells-and-offsets/012-closed-shell-sealed-void": {
@@ -1475,191 +1639,359 @@
"edges": 24,
"faces": 12,
"vertices": 16,
- "volume_mm3": 15743.999999999998
+ "volume_mm3": 15744.0
},
- "seconds": 0.018255444,
+ "seconds": 0.017151441,
"status": "pass"
},
"ladder/09-shells-and-offsets/013-dome-shelled-from-base": {
"measured": {
- "area_mm2": 4787.787342099054,
+ "area_mm2": 4787.7872041001665,
"body_count": 1,
"edges": 4,
"faces": 3,
"vertices": 4,
- "volume_mm3": 4540.648982326449
+ "volume_mm3": 4540.648582054095
},
- "seconds": 0.235684567,
+ "seconds": 0.112463321,
"status": "pass"
},
"ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled": {
"measured": {
- "area_mm2": 48232.25453283639,
+ "area_mm2": 48232.25377351871,
"body_count": 1,
"edges": 48,
"faces": 19,
"vertices": 32,
- "volume_mm3": 47497.57000224123
+ "volume_mm3": 47497.55678038107
},
- "seconds": 0.123522195,
+ "seconds": 0.077272355,
"status": "pass"
},
"ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back": {
"measured": {
- "area_mm2": 5332.688306886705,
+ "area_mm2": 5332.688157880919,
"body_count": 1,
"edges": 7,
"faces": 6,
"vertices": 7,
- "volume_mm3": 5540.613076260847
+ "volume_mm3": 5540.61199574002
},
- "seconds": 0.922183804,
+ "seconds": 0.695622861,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/001-rect-pattern-holes": {
"measured": {
- "area_mm2": 7506.857613724541,
+ "area_mm2": 7506.858347027459,
"body_count": 1,
"edges": 30,
"faces": 12,
"vertices": 20,
- "volume_mm3": 22821.901949174513
+ "volume_mm3": 22821.902754590934
},
- "seconds": 0.17511958,
+ "seconds": 0.238580543,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/002-circular-pattern-holes": {
"measured": {
- "area_mm2": 8595.396203488179,
+ "area_mm2": 8595.39750023962,
"body_count": 1,
"edges": 27,
"faces": 11,
"vertices": 18,
- "volume_mm3": 26012.383532001513
+ "volume_mm3": 26012.387171703303
},
- "seconds": 0.350811307,
+ "seconds": 0.483548993,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core": {
"measured": {
- "area_mm2": 3868.0116581684933,
+ "area_mm2": 3868.011849606836,
"body_count": 2,
"edges": 39,
"faces": 17,
"vertices": 26,
- "volume_mm3": 9195.866260243196
+ "volume_mm3": 9195.867288043119
},
- "seconds": 0.315056057,
+ "seconds": 0.299450421,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/004-mirror-body-joined": {
"measured": {
- "area_mm2": 9742.47737488009,
+ "area_mm2": 9742.477796051942,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 44858.40293082078
+ "volume_mm3": 44858.40734613875
},
- "seconds": 0.066688428,
+ "seconds": 0.047100825,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/005-mirror-feature": {
"measured": {
- "area_mm2": 9742.477396690481,
+ "area_mm2": 9742.477796086725,
"body_count": 1,
"edges": 18,
"faces": 8,
"vertices": 12,
- "volume_mm3": 44858.4039421837
+ "volume_mm3": 44858.40734637524
},
- "seconds": 0.074462135,
+ "seconds": 0.073737999,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores": {
"measured": {
- "area_mm2": 8472.87515433848,
+ "area_mm2": 8472.875386822696,
"body_count": 1,
"edges": 39,
"faces": 21,
"vertices": 26,
- "volume_mm3": 26304.552440002004
+ "volume_mm3": 26304.55528840379
},
- "seconds": 0.854954268,
+ "seconds": 0.75764951,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/007-pattern-bodies": {
"measured": {
- "area_mm2": 980.1768925219793,
+ "area_mm2": 980.1769079213999,
"body_count": 4,
"edges": 12,
"faces": 12,
"vertices": 8,
- "volume_mm3": 1130.973281262568
+ "volume_mm3": 1130.973355299363
},
- "seconds": 0.030954617,
+ "seconds": 0.034578003,
"status": "pass"
},
"ladder/10-patterns-and-mirrors/008-part-vents": {
"measured": {
- "area_mm2": 20922.653960454496,
+ "area_mm2": 20922.655884935477,
"body_count": 1,
"edges": 152,
"faces": 59,
"vertices": 100,
- "volume_mm3": 15355.286014502955
+ "volume_mm3": 15355.288772614174
},
- "seconds": 1.764667122,
+ "seconds": 1.5896883499999999,
"status": "pass"
},
"ladder/11-cumulative-parts/001-bracket": {
"measured": {
- "area_mm2": 10415.793632553658,
+ "area_mm2": 10415.793999431555,
"body_count": 1,
"edges": 30,
"faces": 12,
"vertices": 20,
- "volume_mm3": 31550.35228808287
+ "volume_mm3": 31550.35411758737
},
- "seconds": 0.087923968,
+ "seconds": 0.089256502,
"status": "pass"
},
"ladder/11-cumulative-parts/002-flange": {
"measured": {
- "area_mm2": 16258.85231664228,
+ "area_mm2": 16258.852952953679,
"body_count": 1,
"edges": 31,
"faces": 14,
"vertices": 20,
- "volume_mm3": 55442.52558072023
+ "volume_mm3": 55442.53182457834
},
- "seconds": 0.618163039,
+ "seconds": 0.672579846,
"status": "pass"
},
"ladder/11-cumulative-parts/003-threaded-flange": {
"measured": {
- "area_mm2": 17357.35813902275,
+ "area_mm2": 17357.35940342288,
"body_count": 1,
"edges": 104,
"faces": 38,
"vertices": 69,
- "volume_mm3": 52962.08974469333
+ "volume_mm3": 52962.09746083463
},
- "seconds": 2.199779541,
+ "seconds": 2.165888799,
"status": "pass"
},
"ladder/11-cumulative-parts/004-housing": {
"measured": {
- "area_mm2": 21105.285520302223,
+ "area_mm2": 21105.28755123865,
"body_count": 1,
"edges": 210,
"faces": 78,
"vertices": 139,
- "volume_mm3": 15138.516074654483
+ "volume_mm3": 15138.51984646152
+ },
+ "seconds": 2.313084051,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/001-base-flange": {
+ "measured": {
+ "area_mm2": 12640.0,
+ "body_count": 1,
+ "edges": 12,
+ "faces": 6,
+ "vertices": 8,
+ "volume_mm3": 12000.0
+ },
+ "seconds": 0.002311005,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/002-edge-flange-90": {
+ "measured": {
+ "area_mm2": 16136.884901330357,
+ "body_count": 1,
+ "edges": 24,
+ "faces": 10,
+ "vertices": 16,
+ "volume_mm3": 15428.318530998597
+ },
+ "seconds": 0.005208205,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/003-four-flanges-90-closed-corners": {
+ "measured": {
+ "area_mm2": 23186.608102624614,
+ "body_count": 1,
+ "edges": 100,
+ "faces": 46,
+ "vertices": 56,
+ "volume_mm3": 22251.65632905223
+ },
+ "seconds": 0.013824846,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/004-four-flanges-72-leaning-out": {
+ "measured": {
+ "area_mm2": 24953.88745958142,
+ "body_count": 1,
+ "edges": 100,
+ "faces": 46,
+ "vertices": 56,
+ "volume_mm3": 23902.891080131303
+ },
+ "seconds": 0.013688925,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/005-four-flanges-108-leaning-in": {
+ "measured": {
+ "area_mm2": 21135.960695887396,
+ "body_count": 1,
+ "edges": 100,
+ "faces": 46,
+ "vertices": 56,
+ "volume_mm3": 20295.27663998377
+ },
+ "seconds": 0.014171471,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/006-corner-relief-round": {
+ "measured": {
+ "area_mm2": 23118.077137837114,
+ "body_count": 1,
+ "edges": 112,
+ "faces": 50,
+ "vertices": 64,
+ "volume_mm3": 22125.992622723512
+ },
+ "seconds": 0.017297633,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/007-corner-relief-rectangular": {
+ "measured": {
+ "area_mm2": 23118.077137708584,
+ "body_count": 1,
+ "edges": 116,
+ "faces": 46,
+ "vertices": 72,
+ "volume_mm3": 22119.125363817402
+ },
+ "seconds": 0.008106542,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/008-corner-relief-tear": {
+ "measured": {
+ "area_mm2": 23193.661881433123,
+ "body_count": 1,
+ "edges": 76,
+ "faces": 38,
+ "vertices": 40,
+ "volume_mm3": 22267.903289987218
+ },
+ "seconds": 0.070922958,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/009-hem-on-the-back-edge": {
+ "measured": {
+ "area_mm2": 18438.654703981796,
+ "body_count": 1,
+ "edges": 36,
+ "faces": 14,
+ "vertices": 24,
+ "volume_mm3": 17684.955592012873
+ },
+ "seconds": 0.005880081,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/010-fold-90": {
+ "measured": {
+ "area_mm2": 12640.000000002789,
+ "body_count": 1,
+ "edges": 24,
+ "faces": 10,
+ "vertices": 16,
+ "volume_mm3": 12000.000000267475
+ },
+ "seconds": 0.005451935,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/011-fold-unfolded": {
+ "measured": {
+ "area_mm2": 12639.999999949136,
+ "body_count": 1,
+ "edges": 12,
+ "faces": 6,
+ "vertices": 8,
+ "volume_mm3": 11999.999999950776
+ },
+ "seconds": 0.010428666,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/012-fold-refolded": {
+ "measured": {
+ "area_mm2": 12640.000000002789,
+ "body_count": 1,
+ "edges": 24,
+ "faces": 10,
+ "vertices": 16,
+ "volume_mm3": 12000.000000267475
+ },
+ "seconds": 0.007827708,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/013-flat-pattern": {
+ "measured": {
+ "area_mm2": 23186.608102624614,
+ "body_count": 1,
+ "edges": 100,
+ "faces": 46,
+ "vertices": 56,
+ "volume_mm3": 22251.65632905223
+ },
+ "seconds": 0.032328181,
+ "status": "pass"
+ },
+ "ladder/12-sheet-metal/014-bracket": {
+ "measured": {
+ "area_mm2": 19539.522023125195,
+ "body_count": 1,
+ "edges": 38,
+ "faces": 15,
+ "vertices": 26,
+ "volume_mm3": 18699.55742984613
},
- "seconds": 2.307493908,
+ "seconds": 0.091808771,
"status": "pass"
}
},
- "reason": "SMLib a15b5a2: corner setbacks, the ball-fit refusal before the corners, the graded vacuous cases and the two thread cases"
+ "reason": "SMLib 60b1c6a: tiers 05 and 06 take the UNC, UNF, Rc and NPT tapped holes, the pipe threads, the steep flank and the tip options, tier 12 (sheet metal) is new; the 139 cases before keep their statuses and counts, their volumes and areas re-measured within 2e-6"
}
diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.json
index 8f30021101..dab9df7ed2 100644
--- a/tests/kernel-cases/ladder/ladder.json
+++ b/tests/kernel-cases/ladder/ladder.json
@@ -2,10 +2,10 @@
"tiers": [
{
"cases": [
- "ladder/01-primitives/005-sphere",
"ladder/01-primitives/001-box",
- "ladder/01-primitives/004-frustum",
+ "ladder/01-primitives/005-sphere",
"ladder/01-primitives/003-cone",
+ "ladder/01-primitives/004-frustum",
"ladder/01-primitives/002-cylinder",
"ladder/01-primitives/006-torus"
],
@@ -14,30 +14,30 @@
},
{
"cases": [
- "ladder/02-booleans/001-coincident-face-join",
- "ladder/02-booleans/019-notch-flush-with-end-face",
"ladder/02-booleans/004-edge-on-edge-no-overlap",
"ladder/02-booleans/015-knife-edge-wedge-cut",
- "ladder/02-booleans/014-cut-through-sphere-pole",
+ "ladder/02-booleans/001-coincident-face-join",
"ladder/02-booleans/016-v-groove-pinches-bottom-to-line",
- "ladder/02-booleans/020-part-back-wall",
"ladder/02-booleans/003-pocket-flush-with-top",
+ "ladder/02-booleans/020-part-back-wall",
+ "ladder/02-booleans/019-notch-flush-with-end-face",
"ladder/02-booleans/002-coplanar-overlap-join",
+ "ladder/02-booleans/014-cut-through-sphere-pole",
+ "ladder/02-booleans/007-near-tangent-gap-1e-3",
"ladder/02-booleans/006-tangent-along-line-no-overlap",
- "ladder/02-booleans/017-cylinder-tangent-top-and-bottom",
- "ladder/02-booleans/018-hole-tangent-to-side-face",
- "ladder/02-booleans/008-near-tangent-gap-1e-6",
"ladder/02-booleans/010-near-tangent-overlap-1e-6",
- "ladder/02-booleans/011-tangent-along-circle-through-hole",
- "ladder/02-booleans/005-vertex-on-face-no-overlap",
- "ladder/02-booleans/007-near-tangent-gap-1e-3",
+ "ladder/02-booleans/008-near-tangent-gap-1e-6",
"ladder/02-booleans/009-near-tangent-overlap-1e-3",
+ "ladder/02-booleans/005-vertex-on-face-no-overlap",
+ "ladder/02-booleans/017-cylinder-tangent-top-and-bottom",
+ "ladder/02-booleans/018-hole-tangent-to-side-face",
"ladder/02-booleans/013-cut-across-cylinder-seam",
- "ladder/02-booleans/021-holes-touching-at-a-point",
"ladder/02-booleans/012-tangent-along-circle-bowl",
+ "ladder/02-booleans/011-tangent-along-circle-through-hole",
"ladder/02-booleans/022-cylinder-grazing-a-hole-edge",
- "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined",
+ "ladder/02-booleans/021-holes-touching-at-a-point",
"ladder/02-booleans/024-wall-halves-merged-into-a-flange",
+ "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined",
"ladder/02-booleans/025-flush-chord-layers-joined"
],
"tier": "02-booleans",
@@ -45,14 +45,14 @@
},
{
"cases": [
- "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end",
- "ladder/03-analytic-profiles/007-revolve-180-touching-axis",
"ladder/03-analytic-profiles/006-revolve-partial-90",
+ "ladder/03-analytic-profiles/007-revolve-180-touching-axis",
"ladder/03-analytic-profiles/008-extrude-slot",
+ "ladder/03-analytic-profiles/001-extrude-rect-with-arc-end",
"ladder/03-analytic-profiles/003-extrude-tapered-circle",
"ladder/03-analytic-profiles/002-extrude-annulus",
- "ladder/03-analytic-profiles/004-revolve-full-off-axis",
"ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere",
+ "ladder/03-analytic-profiles/004-revolve-full-off-axis",
"ladder/03-analytic-profiles/009-part-boss-and-slot",
"ladder/03-analytic-profiles/010-revolve-horn-torus-270"
],
@@ -65,9 +65,9 @@
"ladder/04-spline-profiles/001-extrude-bezier-arch",
"ladder/04-spline-profiles/008-loft-square-to-circle",
"ladder/04-spline-profiles/009-extrude-periodic-fit-spline",
- "ladder/04-spline-profiles/004-sweep-square-along-bezier",
"ladder/04-spline-profiles/006-loft-circle-frustum",
"ladder/04-spline-profiles/007-loft-three-circles",
+ "ladder/04-spline-profiles/004-sweep-square-along-bezier",
"ladder/04-spline-profiles/002-revolve-bezier-profile",
"ladder/04-spline-profiles/010-part-bezier-window",
"ladder/04-spline-profiles/003-pipe-along-bezier",
@@ -79,95 +79,95 @@
},
{
"cases": [
- "ladder/05-holes-and-taps/006-tapped-m6-through",
"ladder/05-holes-and-taps/001-simple-through",
- "ladder/05-holes-and-taps/009-hole-0.5-from-edge",
"ladder/05-holes-and-taps/010-hole-tangent-to-end-face",
- "ladder/05-holes-and-taps/003-drilled-blind-118",
+ "ladder/05-holes-and-taps/006-tapped-m6-through",
+ "ladder/05-holes-and-taps/017-tapped-1-4-npt-through",
+ "ladder/05-holes-and-taps/016-tapped-rc-1-2-through",
"ladder/05-holes-and-taps/002-simple-blind-flat",
- "ladder/05-holes-and-taps/004-counterbore",
+ "ladder/05-holes-and-taps/003-drilled-blind-118",
"ladder/05-holes-and-taps/007-tapped-m8-blind",
+ "ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind",
+ "ladder/05-holes-and-taps/009-hole-0.5-from-edge",
+ "ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through",
+ "ladder/05-holes-and-taps/004-counterbore",
"ladder/05-holes-and-taps/005-countersink",
"ladder/05-holes-and-taps/011-crossing-holes-steinmetz",
"ladder/05-holes-and-taps/012-crossing-tapped-holes-offset",
"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face",
- "ladder/05-holes-and-taps/013-part-holes",
- "ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through",
- "ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind",
- "ladder/05-holes-and-taps/016-tapped-rc-1-2-through",
- "ladder/05-holes-and-taps/017-tapped-1-4-npt-through"
+ "ladder/05-holes-and-taps/013-part-holes"
],
"tier": "05-holes-and-taps",
"what": "holes and tapped holes"
},
{
"cases": [
+ "ladder/06-threads/030-square-thread-refused",
"ladder/06-threads/012-external-acme-3-4-6",
- "ladder/06-threads/013-external-s20x4",
"ladder/06-threads/011-external-tr20x4",
- "ladder/06-threads/003-external-m10-partial-length",
+ "ladder/06-threads/029-external-tr20x4-chamfer-needs-depth",
+ "ladder/06-threads/013-external-s20x4",
+ "ladder/06-threads/021-internal-rp-1-2",
+ "ladder/06-threads/020-external-g-1-2",
"ladder/06-threads/015-internal-tr20x4-nut",
"ladder/06-threads/014-external-buttress-asme-1.5-8",
+ "ladder/06-threads/026-external-s20x4-steep-flank-start-to-shoulder",
"ladder/06-threads/010-part-threaded-boss",
- "ladder/06-threads/016-external-m10-left-hand",
- "ladder/06-threads/019-external-tr40x14-p7-two-start",
+ "ladder/06-threads/025-external-s20x4-steep-flank-end-to-shoulder",
+ "ladder/06-threads/003-external-m10-partial-length",
"ladder/06-threads/005-internal-m10-through",
- "ladder/06-threads/006-external-m10-into-chamfer",
- "ladder/06-threads/007-external-m10-at-filleted-shoulder",
- "ladder/06-threads/001-external-m10-full",
+ "ladder/06-threads/019-external-tr40x14-p7-two-start",
+ "ladder/06-threads/028-external-tr20x4-chamfer-30-deg-2.5-deep",
+ "ladder/06-threads/022-external-r-1-2-taper",
+ "ladder/06-threads/024-internal-rc-1-2-taper",
"ladder/06-threads/004-external-m10-to-shoulder",
+ "ladder/06-threads/007-external-m10-at-filleted-shoulder",
"ladder/06-threads/009-thread-runout-length",
- "ladder/06-threads/002-external-m10x1-fine",
- "ladder/06-threads/017-external-m10-chamfered-tip",
- "ladder/06-threads/008-multi-start-thread",
- "ladder/06-threads/018-external-m10-both-hands",
- "ladder/06-threads/020-external-g-1-2",
- "ladder/06-threads/021-internal-rp-1-2",
- "ladder/06-threads/022-external-r-1-2-taper",
"ladder/06-threads/023-external-1-2-npt",
- "ladder/06-threads/024-internal-rc-1-2-taper",
- "ladder/06-threads/025-external-s20x4-steep-flank-end-to-shoulder",
- "ladder/06-threads/026-external-s20x4-steep-flank-start-to-shoulder",
+ "ladder/06-threads/016-external-m10-left-hand",
+ "ladder/06-threads/001-external-m10-full",
+ "ladder/06-threads/006-external-m10-into-chamfer",
"ladder/06-threads/027-external-m10-chamfered-start",
- "ladder/06-threads/028-external-tr20x4-chamfer-30-deg-2.5-deep",
- "ladder/06-threads/029-external-tr20x4-chamfer-needs-depth",
- "ladder/06-threads/030-square-thread-refused"
+ "ladder/06-threads/002-external-m10x1-fine",
+ "ladder/06-threads/008-multi-start-thread",
+ "ladder/06-threads/017-external-m10-chamfered-tip",
+ "ladder/06-threads/018-external-m10-both-hands"
],
"tier": "06-threads",
"what": "modelled threads"
},
{
"cases": [
- "ladder/07-fillets/015-corner-g2-patch",
- "ladder/07-fillets/019-concave-corner-g2-patch",
- "ladder/07-fillets/006-variable-r5-to-zero",
"ladder/07-fillets/001-single-edge-r5",
"ladder/07-fillets/007-variable-r5-to-1e-3",
"ladder/07-fillets/011-chain-ending-at-corner",
+ "ladder/07-fillets/002-four-vertical-edges-r5",
+ "ladder/07-fillets/006-variable-r5-to-zero",
+ "ladder/07-fillets/008-constant-r1e-3",
"ladder/07-fillets/005-variable-r5-to-r1",
+ "ladder/07-fillets/010-corner-unequal-r7-r3",
"ladder/07-fillets/004-convex-and-concave-r5",
"ladder/07-fillets/009-corner-three-equal-r5",
- "ladder/07-fillets/008-constant-r1e-3",
- "ladder/07-fillets/002-four-vertical-edges-r5",
- "ladder/07-fillets/010-corner-unequal-r7-r3",
- "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7",
- "ladder/07-fillets/012-variable-into-rounded-corner",
"ladder/07-fillets/014-curved-edge-r2",
+ "ladder/07-fillets/012-variable-into-rounded-corner",
+ "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7",
"ladder/07-fillets/018-corner-three-sequential-r5-r3-r2",
- "ladder/07-fillets/003-tangent-chain-r3",
"ladder/07-fillets/013-corner-setback",
- "ladder/07-fillets/017-part-rounds"
+ "ladder/07-fillets/003-tangent-chain-r3",
+ "ladder/07-fillets/017-part-rounds",
+ "ladder/07-fillets/019-concave-corner-g2-patch",
+ "ladder/07-fillets/015-corner-g2-patch"
],
"tier": "07-fillets",
"what": "constant, variable and corner fillets"
},
{
"cases": [
- "ladder/08-chamfers/005-corner-two-mitred-3",
- "ladder/08-chamfers/004-corner-three-equal-3",
- "ladder/08-chamfers/003-distance-angle-5-30",
"ladder/08-chamfers/001-equal-5",
+ "ladder/08-chamfers/003-distance-angle-5-30",
"ladder/08-chamfers/002-two-distances-5-3",
+ "ladder/08-chamfers/005-corner-two-mitred-3",
+ "ladder/08-chamfers/004-corner-three-equal-3",
"ladder/08-chamfers/007-chamfer-then-fillets",
"ladder/08-chamfers/006-curved-edge-2",
"ladder/08-chamfers/008-part-chamfers"
@@ -177,18 +177,18 @@
},
{
"cases": [
- "ladder/09-shells-and-offsets/007-offset-top-face-5",
"ladder/09-shells-and-offsets/001-box-open-top-t2",
- "ladder/09-shells-and-offsets/004-thin-wall-0.2",
"ladder/09-shells-and-offsets/003-tube-two-open-faces",
+ "ladder/09-shells-and-offsets/007-offset-top-face-5",
+ "ladder/09-shells-and-offsets/004-thin-wall-0.2",
"ladder/09-shells-and-offsets/012-closed-shell-sealed-void",
"ladder/09-shells-and-offsets/009-shell-outside-t2",
"ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2",
"ladder/09-shells-and-offsets/008-offset-cylinder-wall-2",
+ "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",
"ladder/09-shells-and-offsets/002-cylinder-open-top-t1",
- "ladder/09-shells-and-offsets/010-shell-under-rounded-top",
"ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled",
- "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",
+ "ladder/09-shells-and-offsets/010-shell-under-rounded-top",
"ladder/09-shells-and-offsets/013-dome-shelled-from-base",
"ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back",
"ladder/09-shells-and-offsets/011-part-shell"
@@ -224,17 +224,17 @@
"cases": [
"ladder/12-sheet-metal/001-base-flange",
"ladder/12-sheet-metal/002-edge-flange-90",
- "ladder/12-sheet-metal/003-four-flanges-90-closed-corners",
+ "ladder/12-sheet-metal/010-fold-90",
+ "ladder/12-sheet-metal/009-hem-on-the-back-edge",
+ "ladder/12-sheet-metal/012-fold-refolded",
+ "ladder/12-sheet-metal/007-corner-relief-rectangular",
+ "ladder/12-sheet-metal/011-fold-unfolded",
"ladder/12-sheet-metal/004-four-flanges-72-leaning-out",
+ "ladder/12-sheet-metal/003-four-flanges-90-closed-corners",
"ladder/12-sheet-metal/005-four-flanges-108-leaning-in",
"ladder/12-sheet-metal/006-corner-relief-round",
- "ladder/12-sheet-metal/007-corner-relief-rectangular",
- "ladder/12-sheet-metal/008-corner-relief-tear",
- "ladder/12-sheet-metal/009-hem-on-the-back-edge",
- "ladder/12-sheet-metal/010-fold-90",
- "ladder/12-sheet-metal/011-fold-unfolded",
- "ladder/12-sheet-metal/012-fold-refolded",
"ladder/12-sheet-metal/013-flat-pattern",
+ "ladder/12-sheet-metal/008-corner-relief-tear",
"ladder/12-sheet-metal/014-bracket"
],
"tier": "12-sheet-metal",