Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

A cut ending in a face of its target no longer leaves the hole closed by a skin (#2827)

Erlis Vidal9e15995a74ff
diff --git a/crates/engine/src/boolean_regression_tests.rs b/crates/engine/src/boolean_regression_tests.rs
index 59a28da749..1cacb72b6a 100644
--- a/crates/engine/src/boolean_regression_tests.rs
+++ b/crates/engine/src/boolean_regression_tests.rs
@@ -997,3 +997,38 @@ fn prism_edge_in_a_round_cornered_slab_end_face_joins() {
assert!((got - (prism + slab - shared)).abs() < 1e-3 * got, "r {r}: {got} vs {}", prism + slab - shared);
}
}
+
+/// A cut from a face up to the plate's top face, its tool's end lying in that face: the boolean
+/// of the bodies as they lie left the hole closed by a skin of no thickness (the plate's top face
+/// whole over the hole, the tool's end face under it), which no volume shows and which was kept.
+/// The hole is open, and the cut takes the whole tool: the circle of radius 3.04 the two
+/// profiles make, from the barrel cut's floor at z 1.6 up to the plate's top at z 2.8.
+#[test]
+fn cut_up_to_the_plate_top_face_opens_the_hole() {
+ let mut script: Value = serde_json::from_str(include_str!("../../../examples/regressions/cut_up_to_face_leaves_skin.json")).unwrap();
+ let s = replay_value(&script);
+ assert!(s.model.results.iter().all(|r| r.error.is_none()), "{:?}", s.model.results);
+ let state = s.model.state();
+ let body = &state.body("Body7").unwrap().body;
+ assert!(body.validity().is_empty(), "{:?}", body.validity());
+ let skin: Vec<f64> = body
+ .faces(1e-4)
+ .unwrap()
+ .into_iter()
+ .filter(|f| f.plane_normal.is_some_and(|n| n.z < -0.999) && (f.centroid.z - 2.8).abs() < 1e-6)
+ .map(|f| f.area)
+ .collect();
+ assert!(skin.is_empty(), "faces at z 2.8 facing down, areas {skin:?} mm²");
+ // The same design without the cut.
+ script["commands"].as_array_mut().unwrap().pop();
+ let before = replay_value(&script);
+ let fine = |s: &Session| s.model.state().body("Body7").unwrap().body.tessellate(1e-5).unwrap().measure().volume;
+ let (removed, want) = (fine(&before) - fine(&s), std::f64::consts::PI * 3.04 * 3.04 * 1.2);
+ assert!((removed - want).abs() < 0.01, "removed {removed} mm³, want {want}");
+}
+
+fn replay_value(script: &Value) -> Session {
+ let mut s = Session::default();
+ s.run_script(script).unwrap();
+ s
+}
diff --git a/crates/kernel/src/coplanar.rs b/crates/kernel/src/coplanar.rs
index 201d3bb1a1..9f40592106 100644
--- a/crates/kernel/src/coplanar.rs
+++ b/crates/kernel/src/coplanar.rs
@@ -999,6 +999,44 @@ pub(crate) fn faces_touch(a: &Body, b: &Body) -> bool {
})
}
+/// Does `r` hold a skin of no thickness: a planar face lying on another of its planar faces that
+/// faces the other way, with no material behind part of it? A cut whose tool ends exactly on a
+/// face of the target can come out with the target's face whole over the hole and the tool's end
+/// face under it, closing the hole. No volume shows that, and points sampled off the surface see
+/// the hole either way. Faces back to back in one plane with material behind both (the top of a
+/// step beside the underside of an overhang) are not this. `mesh` is `r`'s mesh; what counts is
+/// an area of the faces with nothing behind it, so that the few triangles along an edge where the
+/// mesh of a curved neighbour cuts the corner don't.
+pub(crate) fn has_skin(r: &Body, mesh: &solidcraft_geom::Mesh) -> bool {
+ let size = r.size();
+ let tol = (size * 1e-7).max(1e-9) * 10.0;
+ let p = planes(r);
+ if p.len() > MAX_SKIN_FACES {
+ return false;
+ }
+ let paired: HashMap<usize, Vec3> = p
+ .iter()
+ .filter(|(i, x)| p.iter().any(|(j, y)| i != j && x.n.dot(y.n) < -1.0 + 1e-9 && (x.d + y.d).abs() < tol))
+ .map(|(i, x)| (*i, x.n))
+ .collect();
+ if paired.is_empty() {
+ return false;
+ }
+ let inside = mesh.inside_index();
+ let depth = (size * 1e-4).max(1e-6);
+ let mut open = 0.0;
+ for (t, face) in mesh.triangles.iter().zip(&mesh.tri_face).take(100_000) {
+ let (Some(n), Some([a, b, c])) = (paired.get(&(*face as usize)), mesh.tri(t)) else { continue };
+ if !inside.contains((a + b + c) / 3.0 - *n * depth) {
+ open += (b - a).cross(c - a).len() * 0.5;
+ }
+ }
+ open > (size * size * 1e-6).max(1e-9)
+}
+
+/// The most planar faces [`has_skin`] pairs up (every pair is compared).
+const MAX_SKIN_FACES: usize = 2000;
+
/// The triangles of `tool`'s faces in the plane (`m`, `d`), `m` their outward normal, each with
/// how far its face reaches past it sideways. A face bounded by straight edges is its
/// triangles; they are drawn in by `skin`, so that faces of the other body lying against the
diff --git a/crates/kernel/src/ops.rs b/crates/kernel/src/ops.rs
index 8d95b7904f..9309b6336f 100644
--- a/crates/kernel/src/ops.rs
+++ b/crates/kernel/src/ops.rs
@@ -1295,7 +1295,8 @@ where
// nothing to cut, so it returns both operands side by side (#396). Volume and point
// sampling cannot see that; the shell grouping can. Only contact over an area counts
// (bodies tangent along a line stay two lumps), and operands already like that, saved
- // before this was caught, stay joinable.
+ // before this was caught, stay joinable. Nor can they see a skin of no thickness left over
+ // a hole by a tool ending in a face of the target ([`crate::coplanar::has_skin`]).
let unfused = |r: &Body| {
op == BoolOp::Union
&& r.shell_count() > 1
@@ -1311,7 +1312,7 @@ where
if !bounds {
return (false, v);
}
- if unfused(r) {
+ if unfused(r) || crate::coplanar::has_skin(r, &mr) {
return (false, v);
}
let consistent = match &meshes {
diff --git a/examples/regressions/cut_up_to_face_leaves_skin.json b/examples/regressions/cut_up_to_face_leaves_skin.json
new file mode 100644
index 0000000000..90957bbbd0
--- /dev/null
+++ b/examples/regressions/cut_up_to_face_leaves_skin.json
@@ -0,0 +1,2936 @@
+{
+ "description": "A housing: a 2.8 mm plate (z 0..2.8) with walls to z 15, a centre column, a barrel cut 1.6 mm deep from the bottom, a lid recess and two tapered pockets. Extrude1 then cuts two circle profiles of `housing pellet exit` from the barrel cut's floor (the face at z 1.6) up to the plate's top face (z 2.8). It reports no error, but the hole stays closed: the top face at z 2.8 keeps its area over the hole, and a 28.28 mm2 face at z 2.8 faces down under it, a zero-thickness skin. The sketches are added as a design stores them: solved again, their points move by up to 1e-6 mm and the same cut opens the hole, so the stored positions are part of the case. Result: no face at z 2.8 faces down.",
+ "commands": [
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "total_height",
+ "expression": "15 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_bottom_thickness",
+ "expression": "2.8 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber_deltha",
+ "expression": "0.55 mm - 0.07 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_barrel_cut_depth",
+ "expression": "1.6 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_barrel_cut_length",
+ "expression": "17 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_wall_thickness",
+ "expression": "3.1 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_barrel_cut_width",
+ "expression": "9.7 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_center_diameter",
+ "expression": "11.423 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_spring_diameter",
+ "expression": "26 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "lid_diameter",
+ "expression": "20 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "hole_diameter",
+ "expression": "3.38 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_nut_depth",
+ "expression": "7.5 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "print_extrusion_width",
+ "expression": "0.45 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "print_layer_multiplier",
+ "expression": "( 0.15 * ( 1 - 3.141592653 / 4 ) ) * 1 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_spring_guide_from_top",
+ "expression": "1.7 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_barrel_cut_edge_separation",
+ "expression": "6 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_diameter",
+ "expression": "49 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "screw_diameter",
+ "expression": "3.380 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "pellet_max_height",
+ "expression": "10 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber22_shots",
+ "expression": "17 + 1",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber25_shots",
+ "expression": "15 + 1",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber30_shots",
+ "expression": "13 + 1",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber177_shots",
+ "expression": "21 + 1",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "magnet_depth",
+ "expression": "3.5 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "pelletpath_depth",
+ "expression": "0.6 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_step_size",
+ "expression": "2 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "lid_height_panthera",
+ "expression": "4.4 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber357_shots",
+ "expression": "11 + 1",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_label_depth",
+ "expression": "0.36 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber25",
+ "expression": "6.35 mm + caliber_deltha + 0.07 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber30",
+ "expression": "7.62 mm + caliber_deltha",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "three_lines",
+ "expression": "3 * print_extrusion_width - 2 * print_layer_multiplier",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "two_lines",
+ "expression": "2 * print_extrusion_width - 1 * print_layer_multiplier",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_height",
+ "expression": "total_height - housing_bottom_thickness - 1 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "four_lines",
+ "expression": "4 * print_extrusion_width - 3 * print_layer_multiplier",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_hole_diameter",
+ "expression": "housing_center_diameter + 0.4 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "lid_height",
+ "expression": "total_height - pellet_max_height - housing_bottom_thickness",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber22",
+ "expression": "5.6 mm + caliber_deltha",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_center_height",
+ "expression": "total_height - 4 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber177",
+ "expression": "4.5 mm + caliber_deltha",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "six_lines",
+ "expression": "6 * print_extrusion_width - 5 * print_layer_multiplier",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliberX_shots",
+ "expression": "caliber22_shots",
+ "unit": ""
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliber357",
+ "expression": "9.07 mm + caliber_deltha",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_wall_thickness",
+ "expression": "four_lines",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "two_and_half_lines",
+ "expression": "two_lines + ( 0.45 / 2 ) * 1 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "follower_lid_depth",
+ "expression": "follower_height - lid_height - 1 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "housing_lid_recess",
+ "expression": "lid_height + 0.3 mm",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "parameters.add",
+ "params": {
+ "name": "caliberX",
+ "expression": "caliber22",
+ "unit": "mm"
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "id": 30,
+ "name": "housing",
+ "plane": {
+ "name": "XY",
+ "type": "origin"
+ },
+ "sketch": {
+ "constraints": [
+ {
+ "id": "k1",
+ "output": "c8",
+ "param": "d1",
+ "reverse": true,
+ "type": "offset_distance",
+ "value": 1.2856194489750001
+ },
+ {
+ "id": "k2",
+ "output": "c9",
+ "param": "d2",
+ "reverse": false,
+ "type": "offset_distance",
+ "value": 0.8678097244875
+ },
+ {
+ "a": 27,
+ "b": 28,
+ "id": "k3",
+ "type": "equal"
+ },
+ {
+ "a": 28,
+ "b": 29,
+ "id": "k4",
+ "type": "equal"
+ },
+ {
+ "a": 29,
+ "b": 30,
+ "id": "k5",
+ "type": "equal"
+ },
+ {
+ "a": 30,
+ "b": 31,
+ "id": "k6",
+ "type": "equal"
+ },
+ {
+ "a": 31,
+ "b": 32,
+ "id": "k7",
+ "type": "equal"
+ },
+ {
+ "c": 44,
+ "id": "k8",
+ "p": 49,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 44,
+ "id": "k9",
+ "p": 50,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 44,
+ "id": "k10",
+ "p": 51,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 44,
+ "id": "k11",
+ "p": 52,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 44,
+ "id": "k12",
+ "p": 53,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 44,
+ "id": "k13",
+ "p": 54,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 34,
+ "b": 35,
+ "id": "k14",
+ "type": "equal"
+ },
+ {
+ "a": 35,
+ "b": 36,
+ "id": "k15",
+ "type": "equal"
+ },
+ {
+ "a": 36,
+ "b": 37,
+ "id": "k16",
+ "type": "equal"
+ },
+ {
+ "a": 37,
+ "b": 38,
+ "id": "k17",
+ "type": "equal"
+ },
+ {
+ "a": 38,
+ "b": 39,
+ "id": "k18",
+ "type": "equal"
+ },
+ {
+ "c": 45,
+ "id": "k19",
+ "p": 57,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 45,
+ "id": "k20",
+ "p": 58,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 45,
+ "id": "k21",
+ "p": 59,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 45,
+ "id": "k22",
+ "p": 60,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 45,
+ "id": "k23",
+ "p": 61,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 45,
+ "id": "k24",
+ "p": 62,
+ "type": "point_on_curve"
+ },
+ {
+ "id": "k25",
+ "p": 1,
+ "q": 0,
+ "type": "coincident"
+ },
+ {
+ "a": 3,
+ "b": 0,
+ "id": "k26",
+ "type": "concentric"
+ },
+ {
+ "a": 4,
+ "b": 3,
+ "id": "k27",
+ "type": "concentric"
+ },
+ {
+ "a": 5,
+ "b": 4,
+ "id": "k28",
+ "type": "concentric"
+ },
+ {
+ "a": 13,
+ "b": 0,
+ "id": "k29",
+ "type": "concentric"
+ },
+ {
+ "c": 3,
+ "id": "k30",
+ "p": 9,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 0,
+ "b": 6,
+ "id": "k31",
+ "type": "tangent"
+ },
+ {
+ "c": 2,
+ "id": "k32",
+ "p": 9,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 7,
+ "b": 8,
+ "id": "k33",
+ "type": "parallel"
+ },
+ {
+ "c": 9,
+ "id": "k34",
+ "p": 10,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 8,
+ "b": 11,
+ "id": "k35",
+ "type": "tangent"
+ },
+ {
+ "a": 7,
+ "b": 11,
+ "id": "k36",
+ "type": "tangent"
+ },
+ {
+ "c": 11,
+ "id": "k37",
+ "p": 13,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 11,
+ "id": "k38",
+ "p": 11,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 11,
+ "b": 6,
+ "id": "k39",
+ "type": "concentric"
+ },
+ {
+ "a": 10,
+ "b": 12,
+ "id": "k40",
+ "type": "tangent"
+ },
+ {
+ "a": 9,
+ "b": 12,
+ "id": "k41",
+ "type": "tangent"
+ },
+ {
+ "a": 10,
+ "b": 13,
+ "id": "k42",
+ "type": "tangent"
+ },
+ {
+ "c": 12,
+ "id": "k43",
+ "p": 69,
+ "type": "point_on_curve"
+ },
+ {
+ "id": "k44",
+ "l": 46,
+ "p": 14,
+ "q": 16,
+ "type": "symmetric"
+ },
+ {
+ "a": 9,
+ "b": 13,
+ "id": "k45",
+ "type": "tangent"
+ },
+ {
+ "c": 9,
+ "id": "k46",
+ "p": 12,
+ "type": "point_on_curve"
+ },
+ {
+ "id": "k47",
+ "l": 14,
+ "type": "horizontal"
+ },
+ {
+ "a": 14,
+ "b": 11,
+ "id": "k48",
+ "type": "tangent"
+ },
+ {
+ "a": 15,
+ "b": 8,
+ "id": "k49",
+ "type": "parallel"
+ },
+ {
+ "c": 15,
+ "id": "k50",
+ "p": 5,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 8,
+ "id": "k51",
+ "p": 25,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 8,
+ "id": "k52",
+ "p": 27,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 8,
+ "id": "k53",
+ "p": 26,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 16,
+ "b": 11,
+ "id": "k54",
+ "type": "tangent"
+ },
+ {
+ "id": "k55",
+ "l": 15,
+ "p": 27,
+ "q": 29,
+ "type": "symmetric"
+ },
+ {
+ "id": "k56",
+ "l": 15,
+ "p": 26,
+ "q": 30,
+ "type": "symmetric"
+ },
+ {
+ "id": "k57",
+ "l": 15,
+ "p": 25,
+ "q": 28,
+ "type": "symmetric"
+ },
+ {
+ "a": 16,
+ "b": 17,
+ "id": "k58",
+ "type": "equal"
+ },
+ {
+ "a": 21,
+ "b": 18,
+ "id": "k59",
+ "type": "tangent"
+ },
+ {
+ "c": 18,
+ "id": "k60",
+ "p": 38,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 22,
+ "b": 20,
+ "id": "k61",
+ "type": "tangent"
+ },
+ {
+ "c": 20,
+ "id": "k62",
+ "p": 40,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 14,
+ "b": 24,
+ "id": "k63",
+ "type": "tangent"
+ },
+ {
+ "a": 9,
+ "b": 24,
+ "id": "k64",
+ "type": "tangent"
+ },
+ {
+ "a": 10,
+ "b": 23,
+ "id": "k65",
+ "type": "tangent"
+ },
+ {
+ "a": 14,
+ "b": 23,
+ "id": "k66",
+ "type": "tangent"
+ },
+ {
+ "c": 10,
+ "id": "k67",
+ "p": 43,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 14,
+ "id": "k68",
+ "p": 44,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 14,
+ "id": "k69",
+ "p": 46,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 9,
+ "id": "k70",
+ "p": 47,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 26,
+ "b": 4,
+ "id": "k71",
+ "type": "concentric"
+ },
+ {
+ "id": "k72",
+ "l": 31,
+ "type": "horizontal"
+ },
+ {
+ "id": "k73",
+ "l": 33,
+ "type": "vertical"
+ },
+ {
+ "id": "k74",
+ "p": 55,
+ "q": 19,
+ "type": "coincident"
+ },
+ {
+ "c": 33,
+ "id": "k75",
+ "p": 67,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 13,
+ "id": "k76",
+ "p": 41,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 22,
+ "b": 13,
+ "id": "k77",
+ "type": "tangent"
+ },
+ {
+ "c": 13,
+ "id": "k78",
+ "p": 37,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 21,
+ "b": 13,
+ "id": "k79",
+ "type": "tangent"
+ },
+ {
+ "a": 20,
+ "b": 13,
+ "id": "k80",
+ "type": "tangent"
+ },
+ {
+ "c": 13,
+ "id": "k81",
+ "p": 35,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 13,
+ "id": "k82",
+ "p": 32,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 18,
+ "b": 13,
+ "id": "k83",
+ "type": "tangent"
+ },
+ {
+ "a": 19,
+ "b": 20,
+ "id": "k84",
+ "type": "tangent"
+ },
+ {
+ "a": 19,
+ "b": 18,
+ "id": "k85",
+ "type": "tangent"
+ },
+ {
+ "a": 40,
+ "b": 13,
+ "id": "k86",
+ "type": "tangent"
+ },
+ {
+ "a": 35,
+ "b": 40,
+ "id": "k87",
+ "type": "parallel"
+ },
+ {
+ "c": 41,
+ "id": "k88",
+ "p": 68,
+ "type": "point_on_curve"
+ },
+ {
+ "c": 41,
+ "id": "k89",
+ "p": 33,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 41,
+ "b": 40,
+ "id": "k90",
+ "type": "perpendicular"
+ },
+ {
+ "c": 4,
+ "id": "k91",
+ "param": "d3",
+ "type": "diameter",
+ "value": 11.423
+ },
+ {
+ "c": 5,
+ "id": "k92",
+ "param": "d4",
+ "type": "diameter",
+ "value": 3.38
+ },
+ {
+ "c": 3,
+ "id": "k93",
+ "param": "d5",
+ "type": "diameter",
+ "value": 40.0
+ },
+ {
+ "c": 6,
+ "id": "k94",
+ "param": "d6",
+ "type": "diameter",
+ "value": 6.08
+ },
+ {
+ "id": "k95",
+ "l": 7,
+ "p": 12,
+ "param": "d7",
+ "type": "point_line_distance",
+ "value": 9.7
+ },
+ {
+ "id": "k96",
+ "l": 7,
+ "p": 16,
+ "param": "d8",
+ "type": "point_line_distance",
+ "value": 6.0
+ },
+ {
+ "c": 12,
+ "id": "k97",
+ "param": "d9",
+ "type": "radius",
+ "value": 4.0
+ },
+ {
+ "id": "k98",
+ "p": 5,
+ "param": "d10",
+ "q": 69,
+ "type": "distance_y",
+ "value": 14.0
+ },
+ {
+ "a": 9,
+ "b": 10,
+ "flip": true,
+ "id": "k99",
+ "param": "d11",
+ "type": "angle",
+ "value": 1.5707963267948966
+ },
+ {
+ "c": 16,
+ "id": "k100",
+ "param": "d12",
+ "type": "radius",
+ "value": 0.4
+ },
+ {
+ "c": 21,
+ "id": "k101",
+ "param": "d13",
+ "type": "radius",
+ "value": 2.0
+ },
+ {
+ "c": 23,
+ "id": "k102",
+ "param": "d14",
+ "type": "radius",
+ "value": 2.266
+ },
+ {
+ "c": 24,
+ "id": "k103",
+ "param": "d15",
+ "type": "radius",
+ "value": 2.266
+ },
+ {
+ "id": "k104",
+ "l": 32,
+ "p": 67,
+ "param": "d16",
+ "type": "point_line_distance",
+ "value": 2.89
+ },
+ {
+ "id": "k105",
+ "l": 31,
+ "p": 21,
+ "param": "d17",
+ "type": "point_line_distance",
+ "value": 1.0928097244875001
+ },
+ {
+ "c": 22,
+ "id": "k106",
+ "param": "d18",
+ "type": "radius",
+ "value": 2.0
+ },
+ {
+ "c": 19,
+ "id": "k107",
+ "param": "d19",
+ "type": "radius",
+ "value": 4.0
+ },
+ {
+ "id": "k108",
+ "l": 39,
+ "p": 68,
+ "param": "d20",
+ "type": "point_line_distance",
+ "value": 2.89
+ },
+ {
+ "id": "k109",
+ "l": 35,
+ "p": 63,
+ "param": "d21",
+ "type": "point_line_distance",
+ "value": 1.2856194489750001
+ },
+ {
+ "a": 20,
+ "b": 18,
+ "id": "k110",
+ "param": "d22",
+ "type": "angle",
+ "value": 1.53588974175501
+ }
+ ],
+ "counters": {
+ "a": 9,
+ "c": 11,
+ "k": 110
+ },
+ "curves": [
+ {
+ "c": 1,
+ "construction": false,
+ "id": "c1",
+ "r": 23.039999999993093,
+ "type": "circle"
+ },
+ {
+ "a": 2,
+ "b": 3,
+ "construction": false,
+ "fixed": true,
+ "id": "f1",
+ "type": "line"
+ },
+ {
+ "a": 4,
+ "b": 5,
+ "construction": false,
+ "fixed": true,
+ "id": "f2",
+ "type": "line"
+ },
+ {
+ "c": 6,
+ "construction": true,
+ "id": "c2",
+ "r": 20.0,
+ "type": "circle"
+ },
+ {
+ "c": 7,
+ "construction": false,
+ "id": "c3",
+ "r": 5.7115,
+ "type": "circle"
+ },
+ {
+ "c": 8,
+ "construction": false,
+ "id": "c4",
+ "r": 1.69,
+ "type": "circle"
+ },
+ {
+ "c": 9,
+ "construction": false,
+ "id": "c5",
+ "r": 3.04,
+ "type": "circle"
+ },
+ {
+ "a": 10,
+ "b": 11,
+ "construction": false,
+ "id": "f8",
+ "type": "line"
+ },
+ {
+ "a": 12,
+ "b": 13,
+ "construction": false,
+ "id": "f9",
+ "type": "line"
+ },
+ {
+ "a": 14,
+ "b": 15,
+ "construction": false,
+ "id": "f10",
+ "type": "line"
+ },
+ {
+ "a": 16,
+ "b": 17,
+ "construction": false,
+ "id": "f11",
+ "type": "line"
+ },
+ {
+ "c": 18,
+ "construction": false,
+ "id": "c6",
+ "r": 4.85000000031336,
+ "type": "circle"
+ },
+ {
+ "a": 14,
+ "b": 16,
+ "c": 19,
+ "construction": false,
+ "id": "a1",
+ "type": "arc"
+ },
+ {
+ "a": 17,
+ "b": 15,
+ "c": 20,
+ "construction": false,
+ "id": "a2",
+ "type": "arc"
+ },
+ {
+ "a": 21,
+ "b": 22,
+ "construction": true,
+ "id": "f15",
+ "type": "line"
+ },
+ {
+ "a": 23,
+ "b": 24,
+ "construction": true,
+ "id": "f16",
+ "type": "line"
+ },
+ {
+ "a": 26,
+ "b": 27,
+ "c": 25,
+ "construction": false,
+ "id": "a3",
+ "type": "arc"
+ },
+ {
+ "a": 29,
+ "b": 30,
+ "c": 28,
+ "construction": false,
+ "id": "a4",
+ "type": "arc"
+ },
+ {
+ "a": 31,
+ "b": 32,
+ "construction": false,
+ "id": "f19",
+ "type": "line"
+ },
+ {
+ "a": 31,
+ "b": 34,
+ "c": 33,
+ "construction": false,
+ "id": "a5",
+ "type": "arc"
+ },
+ {
+ "a": 34,
+ "b": 35,
+ "construction": false,
+ "fixed": true,
+ "id": "f21",
+ "type": "line"
+ },
+ {
+ "a": 37,
+ "b": 38,
+ "c": 36,
+ "construction": false,
+ "id": "a6",
+ "type": "arc"
+ },
+ {
+ "a": 40,
+ "b": 41,
+ "c": 39,
+ "construction": false,
+ "id": "a7",
+ "type": "arc"
+ },
+ {
+ "a": 43,
+ "b": 44,
+ "c": 42,
+ "construction": false,
+ "id": "a8",
+ "type": "arc"
+ },
+ {
+ "a": 46,
+ "b": 47,
+ "c": 45,
+ "construction": false,
+ "id": "a9",
+ "type": "arc"
+ },
+ {
+ "a": 44,
+ "b": 46,
+ "construction": false,
+ "id": "f26",
+ "type": "line"
+ },
+ {
+ "c": 48,
+ "construction": false,
+ "id": "c7",
+ "r": 4.769278,
+ "type": "circle"
+ },
+ {
+ "a": 49,
+ "b": 50,
+ "construction": false,
+ "id": "f29",
+ "type": "line"
+ },
+ {
+ "a": 50,
+ "b": 51,
+ "construction": false,
+ "id": "f30",
+ "type": "line"
+ },
+ {
+ "a": 51,
+ "b": 52,
+ "construction": false,
+ "id": "f31",
+ "type": "line"
+ },
+ {
+ "a": 52,
+ "b": 53,
+ "construction": false,
+ "id": "f32",
+ "type": "line"
+ },
+ {
+ "a": 53,
+ "b": 54,
+ "construction": false,
+ "id": "f33",
+ "type": "line"
+ },
+ {
+ "a": 54,
+ "b": 49,
+ "construction": false,
+ "id": "f34",
+ "type": "line"
+ },
+ {
+ "a": 55,
+ "b": 56,
+ "construction": true,
+ "id": "f35",
+ "type": "line"
+ },
+ {
+ "a": 57,
+ "b": 58,
+ "construction": false,
+ "id": "f36",
+ "type": "line"
+ },
+ {
+ "a": 58,
+ "b": 59,
+ "construction": false,
+ "id": "f37",
+ "type": "line"
+ },
+ {
+ "a": 59,
+ "b": 60,
+ "construction": false,
+ "id": "f38",
+ "type": "line"
+ },
+ {
+ "a": 60,
+ "b": 61,
+ "construction": false,
+ "id": "f39",
+ "type": "line"
+ },
+ {
+ "a": 61,
+ "b": 62,
+ "construction": false,
+ "id": "f40",
+ "type": "line"
+ },
+ {
+ "a": 62,
+ "b": 57,
+ "construction": false,
+ "id": "f41",
+ "type": "line"
+ },
+ {
+ "a": 63,
+ "b": 64,
+ "construction": true,
+ "id": "f42",
+ "type": "line"
+ },
+ {
+ "a": 65,
+ "b": 66,
+ "construction": true,
+ "id": "f43",
+ "type": "line"
+ },
+ {
+ "c": 8,
+ "construction": false,
+ "id": "c8",
+ "r": 2.9756194489750003,
+ "type": "circle"
+ },
+ {
+ "c": 48,
+ "construction": false,
+ "id": "c9",
+ "r": 3.9014682755125,
+ "type": "circle"
+ },
+ {
+ "c": 67,
+ "construction": true,
+ "id": "c10",
+ "r": 3.3370845559221345,
+ "type": "circle"
+ },
+ {
+ "c": 68,
+ "construction": true,
+ "id": "c11",
+ "r": 3.3370845559321887,
+ "type": "circle"
+ },
+ {
+ "a": 19,
+ "b": 69,
+ "construction": true,
+ "id": "m13",
+ "type": "line"
+ }
+ ],
+ "offsets": [
+ {
+ "closed": true,
+ "distance": -1.2856194489750001,
+ "outputs": [
+ "c8"
+ ],
+ "sources": [
+ [
+ "c4",
+ true
+ ]
+ ]
+ },
+ {
+ "closed": true,
+ "distance": 0.8678097244875,
+ "outputs": [
+ "c9"
+ ],
+ "sources": [
+ [
+ "c7",
+ true
+ ]
+ ]
+ }
+ ],
+ "points": [
+ {
+ "fixed": true,
+ "id": "origin",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c1.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f1.start",
+ "pos": [
+ 20.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f1.end",
+ "pos": [
+ 2.5,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f2.start",
+ "pos": [
+ 0.0,
+ 2.5
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f2.end",
+ "pos": [
+ 0.0,
+ 20.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c2.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c3.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c4.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c5.center",
+ "pos": [
+ 0.0,
+ 20.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f8.start",
+ "pos": [
+ 4.7440572709653415,
+ 31.34676111743593
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f8.end",
+ "pos": [
+ -3.3742393513795776,
+ 23.48382100606391
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f9.start",
+ "pos": [
+ 11.492535932480322,
+ 24.37911906613869
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f9.end",
+ "pos": [
+ 3.374239351627148,
+ 16.51617899409599
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f10.start",
+ "pos": [
+ 3.3526183880788305,
+ 32.783388327578905
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f10.end",
+ "pos": [
+ 18.113191685694147,
+ 17.543451096209797
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f11.start",
+ "pos": [
+ -2.303513864705641,
+ 32.873764983207224
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f11.end",
+ "pos": [
+ -17.543451096200045,
+ 18.11319168577141
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c6.center",
+ "pos": [
+ 0.0,
+ 20.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a1.center",
+ "pos": [
+ 0.4793639339100286,
+ 30.00051052899045
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a2.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f15.start",
+ "pos": [
+ 16.847551000017898,
+ 24.850000000311898
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f15.end",
+ "pos": [
+ -16.623546999998876,
+ 24.85000000030438
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f16.start",
+ "pos": [
+ 9.422256926787238,
+ 29.12588507090988
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f16.end",
+ "pos": [
+ -5.157321843942895,
+ 15.004898848851603
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a3.center",
+ "pos": [
+ 4.8180318380452976,
+ 17.914557789966715
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a3.start",
+ "pos": [
+ 5.105357281825366,
+ 18.192845571526597
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a3.end",
+ "pos": [
+ 4.530706394275853,
+ 17.63627000839571
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a4.center",
+ "pos": [
+ -1.9304468658272427,
+ 24.88219980154129
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a4.start",
+ "pos": [
+ -2.2177723095694275,
+ 24.603912019942214
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a4.end",
+ "pos": [
+ -1.643121422091574,
+ 25.160487583147514
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f19.start",
+ "pos": [
+ -18.22442760289246,
+ -28.043102894816247
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f19.end",
+ "pos": [
+ -24.249511090231813,
+ -6.915316428320679
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a5.center",
+ "pos": [
+ -14.377782739897706,
+ -26.94614195750076
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a5.end",
+ "pos": [
+ -13.14724407183456,
+ -30.75216016376323
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f21.end",
+ "pos": [
+ 7.757399536659945,
+ -23.993397880386595
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a6.center",
+ "pos": [
+ -18.431106633933677,
+ -20.02547844408478
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a6.start",
+ "pos": [
+ -17.076688481394942,
+ -18.553897162683164
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a6.end",
+ "pos": [
+ -20.354429065319973,
+ -20.57395891270366
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a7.center",
+ "pos": [
+ -6.3722554037222405,
+ -26.459777771923452
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a7.start",
+ "pos": [
+ -5.756986069698662,
+ -28.362786875025243
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a7.end",
+ "pos": [
+ -5.903987352160198,
+ -24.515369113302228
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a8.center",
+ "pos": [
+ -4.991207836430458,
+ 27.116000000282124
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a8.start",
+ "pos": [
+ -6.5677081093051095,
+ 28.74369864854841
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a8.end",
+ "pos": [
+ -4.991207836431011,
+ 24.850000000301
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a9.center",
+ "pos": [
+ 5.687131136239809,
+ 27.116000000296875
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a9.start",
+ "pos": [
+ 5.687131136241227,
+ 24.85000000030553
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "a9.end",
+ "pos": [
+ 7.314829784503578,
+ 28.692500273173373
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c7.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f29.start",
+ "pos": [
+ 3.816448489842134,
+ 28.832809725100045
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f29.end",
+ "pos": [
+ 2.1479062119469194,
+ 31.722809725139882
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f30.end",
+ "pos": [
+ -1.1891783439734689,
+ 31.72280972521438
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f31.end",
+ "pos": [
+ -2.8577206219999844,
+ 28.832809725246687
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f32.end",
+ "pos": [
+ -1.1891783441055306,
+ 25.942809725201045
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f33.end",
+ "pos": [
+ 2.1479062118179804,
+ 25.942809725129404
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f35.start",
+ "pos": [
+ 0.4793639339148472,
+ 30.00051052899103
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f35.end",
+ "pos": [
+ 0.4793639339176719,
+ 28.099835000004717
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f36.start",
+ "pos": [
+ -10.884207425092901,
+ -27.370019276197922
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f36.end",
+ "pos": [
+ -11.15004687559625,
+ -24.04354024875941
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f37.end",
+ "pos": [
+ -14.1637819437734,
+ -22.61052445251943
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f38.end",
+ "pos": [
+ -16.911677561437795,
+ -24.50398768371017
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f39.end",
+ "pos": [
+ -16.645838110929827,
+ -27.830466711150418
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f40.end",
+ "pos": [
+ -13.632103042753231,
+ -29.263482507393416
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f42.start",
+ "pos": [
+ -20.122238683726938,
+ -18.353752325108776
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f42.end",
+ "pos": [
+ 7.132273151961092,
+ -31.313134976753147
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f43.start",
+ "pos": [
+ -17.758870146527276,
+ -34.05681144040707
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "f43.end",
+ "pos": [
+ -12.402122358346736,
+ -22.79118637850851
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c10.center",
+ "pos": [
+ 0.47936393392077803,
+ 28.832809725170332
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c11.center",
+ "pos": [
+ -13.897942493266378,
+ -25.937003479957074
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "q21",
+ "pos": [
+ 0.5432698799540695,
+ 34.0000000001017
+ ]
+ }
+ ]
+ },
+ "suppressed": false,
+ "type": "sketch"
+ },
+ "params": [
+ {
+ "name": "d1",
+ "expression": "three_lines",
+ "unit": "mm"
+ },
+ {
+ "name": "d10",
+ "expression": "14 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d11",
+ "expression": "90 deg",
+ "unit": "deg"
+ },
+ {
+ "name": "d12",
+ "expression": "0.4 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d13",
+ "expression": "2 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d14",
+ "expression": "2.266 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d15",
+ "expression": "2.266 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d16",
+ "expression": "2.89 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d17",
+ "expression": "two_and_half_lines",
+ "unit": "mm"
+ },
+ {
+ "name": "d18",
+ "expression": "2 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d19",
+ "expression": "4 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d2",
+ "expression": "two_lines",
+ "unit": "mm"
+ },
+ {
+ "name": "d20",
+ "expression": "2.89 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d21",
+ "expression": "three_lines",
+ "unit": "mm"
+ },
+ {
+ "name": "d22",
+ "expression": "88 deg",
+ "unit": "deg"
+ },
+ {
+ "name": "d3",
+ "expression": "housing_center_diameter",
+ "unit": "mm"
+ },
+ {
+ "name": "d4",
+ "expression": "screw_diameter",
+ "unit": "mm"
+ },
+ {
+ "name": "d5",
+ "expression": "40 mm",
+ "unit": "mm"
+ },
+ {
+ "name": "d6",
+ "expression": "caliberX",
+ "unit": "mm"
+ },
+ {
+ "name": "d7",
+ "expression": "housing_barrel_cut_width",
+ "unit": "mm"
+ },
+ {
+ "name": "d8",
+ "expression": "housing_barrel_cut_edge_separation",
+ "unit": "mm"
+ },
+ {
+ "name": "d9",
+ "expression": "4 mm",
+ "unit": "mm"
+ }
+ ]
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "body_names": [
+ "Body7"
+ ],
+ "extent": {
+ "convention": "total_distance",
+ "direction": "positive",
+ "distance": "housing_bottom_thickness"
+ },
+ "id": 34,
+ "name": "base",
+ "operation": "new_body",
+ "param_names": [
+ "d31"
+ ],
+ "profiles": {
+ "indices": [
+ 0,
+ 1,
+ 2,
+ 3,
+ 4,
+ 5,
+ 6,
+ 7,
+ 8,
+ 9,
+ 10,
+ 11,
+ 12,
+ 14,
+ 15,
+ 16,
+ 17,
+ 18,
+ 19,
+ 20,
+ 21,
+ 22,
+ 23,
+ 24,
+ 25,
+ 26,
+ 27,
+ 28,
+ 29
+ ],
+ "type": "indices"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "positive",
+ "distance": "total_height"
+ },
+ "id": 35,
+ "name": "housing walls",
+ "operation": "join",
+ "param_names": [
+ "d32"
+ ],
+ "profiles": {
+ "loops": [
+ [
+ "c1",
+ "c6",
+ "f8",
+ "f8",
+ "f26",
+ "a8",
+ "f11",
+ "a2",
+ "a2",
+ "a2",
+ "a2",
+ "a2",
+ "f10",
+ "f9"
+ ],
+ [
+ "c1",
+ "f9",
+ "f10",
+ "a9",
+ "f26",
+ "c6"
+ ],
+ [
+ "c1",
+ "c6",
+ "c6",
+ "c6",
+ "c6",
+ "c1"
+ ],
+ [
+ "f8",
+ "f10",
+ "a1",
+ "f11",
+ "a8",
+ "f26",
+ "f8",
+ "f8",
+ "f33",
+ "f32",
+ "f31",
+ "f30",
+ "f29"
+ ],
+ [
+ "f8",
+ "f29",
+ "f34",
+ "f33",
+ "f8",
+ "a4",
+ "f26",
+ "f26",
+ "a9",
+ "f10"
+ ],
+ [
+ "f8",
+ "f29",
+ "f30",
+ "f31",
+ "f32",
+ "f33"
+ ],
+ [
+ "f8",
+ "f33",
+ "f34",
+ "f29"
+ ],
+ [
+ "f8",
+ "a4",
+ "a4",
+ "f26"
+ ],
+ [
+ "f8",
+ "c6",
+ "a4"
+ ],
+ [
+ "f8",
+ "f26",
+ "a4"
+ ],
+ [
+ "c6",
+ "f26",
+ "a4"
+ ],
+ [
+ "a2",
+ "a6",
+ "f19",
+ "a5",
+ "f21",
+ "a7"
+ ],
+ [
+ "a2",
+ "a7",
+ "f21"
+ ],
+ [
+ "a2",
+ "f19",
+ "a6"
+ ],
+ [
+ "f36",
+ "f37",
+ "f38",
+ "f39",
+ "f40",
+ "f41"
+ ]
+ ],
+ "type": "curves"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "positive",
+ "distance": "housing_center_height"
+ },
+ "id": 36,
+ "name": "housing center",
+ "operation": "join",
+ "param_names": [
+ "d33"
+ ],
+ "profiles": {
+ "indices": [
+ 7,
+ 8,
+ 9,
+ 10,
+ 11,
+ 12,
+ 13,
+ 29
+ ],
+ "type": "indices"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "positive",
+ "distance": "housing_barrel_cut_depth"
+ },
+ "id": 38,
+ "name": "barrel cut",
+ "operation": "cut",
+ "param_names": [
+ "d35"
+ ],
+ "profiles": {
+ "loops": [
+ [
+ "c1",
+ "f9",
+ "f10",
+ "a9",
+ "f26",
+ "c6"
+ ],
+ [
+ "c1",
+ "c6",
+ "f2",
+ "c5"
+ ],
+ [
+ "c1",
+ "c5",
+ "f2",
+ "c6",
+ "c6",
+ "c6"
+ ],
+ [
+ "c1",
+ "c6",
+ "c6",
+ "c6",
+ "c6",
+ "c1"
+ ],
+ [
+ "c1",
+ "c6",
+ "a3",
+ "f9"
+ ],
+ [
+ "c5",
+ "c5"
+ ],
+ [
+ "f8",
+ "f29",
+ "f34",
+ "f33",
+ "f8",
+ "a4",
+ "f26",
+ "f26",
+ "a9",
+ "f10"
+ ],
+ [
+ "f8",
+ "f33",
+ "f34",
+ "f29"
+ ],
+ [
+ "f8",
+ "a4",
+ "a4",
+ "f26"
+ ],
+ [
+ "f8",
+ "c6",
+ "a4"
+ ],
+ [
+ "f8",
+ "f26",
+ "a4"
+ ],
+ [
+ "f9",
+ "a3",
+ "a3"
+ ],
+ [
+ "f9",
+ "a3",
+ "c6"
+ ],
+ [
+ "c6",
+ "f26",
+ "a4"
+ ]
+ ],
+ "type": "curves"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "negative",
+ "distance": "housing_lid_recess",
+ "from": [
+ -2.931496,
+ 23.94939,
+ 15.0
+ ]
+ },
+ "face_names": [
+ "F35:top"
+ ],
+ "id": 41,
+ "name": "lid recess",
+ "operation": "cut",
+ "param_names": [
+ "d39"
+ ],
+ "profiles": {
+ "loops": [
+ [
+ "c1",
+ "c6",
+ "f8",
+ "f8",
+ "f26",
+ "a8",
+ "f11",
+ "a2",
+ "a2",
+ "a2",
+ "a2",
+ "a2",
+ "f10",
+ "f9"
+ ],
+ [
+ "c1",
+ "f9",
+ "f10",
+ "a9",
+ "f26",
+ "c6"
+ ],
+ [
+ "c1",
+ "c6",
+ "c6",
+ "c6",
+ "c6",
+ "c1"
+ ],
+ [
+ "f8",
+ "f10",
+ "a1",
+ "f11",
+ "a8",
+ "f26",
+ "f8",
+ "f8",
+ "f33",
+ "f32",
+ "f31",
+ "f30",
+ "f29"
+ ],
+ [
+ "f8",
+ "f29",
+ "f34",
+ "f33",
+ "f8",
+ "a4",
+ "f26",
+ "f26",
+ "a9",
+ "f10"
+ ],
+ [
+ "f8",
+ "f29",
+ "f30",
+ "f31",
+ "f32",
+ "f33"
+ ],
+ [
+ "f8",
+ "f33",
+ "f34",
+ "f29"
+ ],
+ [
+ "f8",
+ "a4",
+ "a4",
+ "f26"
+ ],
+ [
+ "f8",
+ "c6",
+ "a4"
+ ],
+ [
+ "f8",
+ "f26",
+ "a4"
+ ],
+ [
+ "c6",
+ "f26",
+ "a4"
+ ],
+ [
+ "a2",
+ "a6",
+ "f19",
+ "a5",
+ "f21",
+ "a7"
+ ],
+ [
+ "a2",
+ "a7",
+ "f21"
+ ],
+ [
+ "a2",
+ "f19",
+ "a6"
+ ],
+ [
+ "f36",
+ "f37",
+ "f38",
+ "f39",
+ "f40",
+ "f41"
+ ]
+ ],
+ "type": "curves"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "negative",
+ "distance": "magnet_depth",
+ "from": [
+ -11.736601,
+ -22.705797,
+ 10.5
+ ],
+ "taper": "3 deg"
+ },
+ "face_names": [
+ "F47:top#[F34:side:a5,F34:side:f19,F34:side:f21,F47:side:a2,F47:side:a6,F47:side:a7]"
+ ],
+ "id": 48,
+ "name": "Extrude13",
+ "operation": "cut",
+ "param_names": [
+ "d42",
+ "d43"
+ ],
+ "profiles": {
+ "loops": [
+ [
+ "f8",
+ "f29",
+ "f30",
+ "f31",
+ "f32",
+ "f33"
+ ],
+ [
+ "f8",
+ "f33",
+ "f34",
+ "f29"
+ ],
+ [
+ "f36",
+ "f37",
+ "f38",
+ "f39",
+ "f40",
+ "f41"
+ ]
+ ],
+ "type": "curves"
+ },
+ "sketch": 30,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "id": 57,
+ "name": "housing pellet exit",
+ "plane": {
+ "name": "XY",
+ "type": "origin"
+ },
+ "sketch": {
+ "constraints": [
+ {
+ "c": 0,
+ "id": "k1",
+ "p": 3,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 2,
+ "b": 3,
+ "id": "k2",
+ "type": "equal"
+ },
+ {
+ "c": 0,
+ "id": "k3",
+ "p": 5,
+ "type": "point_on_curve"
+ },
+ {
+ "a": 3,
+ "b": 4,
+ "id": "k4",
+ "type": "equal"
+ },
+ {
+ "a": 4,
+ "b": 3,
+ "id": "k5",
+ "type": "tangent"
+ },
+ {
+ "id": "k6",
+ "p": 3,
+ "param": "d55",
+ "q": 4,
+ "type": "distance_x",
+ "value": 6.58
+ }
+ ],
+ "counters": {
+ "c": 5,
+ "k": 6
+ },
+ "curves": [
+ {
+ "c": 1,
+ "construction": false,
+ "fixed": true,
+ "id": "c1",
+ "r": 20.0,
+ "type": "circle"
+ },
+ {
+ "c": 2,
+ "construction": false,
+ "fixed": true,
+ "id": "c2",
+ "r": 23.04,
+ "type": "circle"
+ },
+ {
+ "c": 3,
+ "construction": false,
+ "id": "c3",
+ "r": 3.04,
+ "type": "circle"
+ },
+ {
+ "c": 4,
+ "construction": false,
+ "fixed": true,
+ "id": "c4",
+ "r": 3.04,
+ "type": "circle"
+ },
+ {
+ "c": 5,
+ "construction": false,
+ "id": "c5",
+ "r": 3.04,
+ "type": "circle"
+ }
+ ],
+ "points": [
+ {
+ "fixed": true,
+ "id": "origin",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c1.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c2.center",
+ "pos": [
+ 0.0,
+ 0.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c3.center",
+ "pos": [
+ 6.58,
+ 18.88659842322063
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c4.center",
+ "pos": [
+ 0.0,
+ 20.0
+ ]
+ },
+ {
+ "fixed": false,
+ "id": "c5.center",
+ "pos": [
+ -6.009353400691293,
+ 19.07584
+ ]
+ }
+ ]
+ },
+ "suppressed": false,
+ "type": "sketch"
+ },
+ "params": [
+ {
+ "name": "d55",
+ "expression": "caliberX + 0.5 mm",
+ "unit": "mm"
+ }
+ ]
+ }
+ },
+ {
+ "command": "timeline.add",
+ "params": {
+ "feature": {
+ "extent": {
+ "convention": "total_distance",
+ "direction": "positive",
+ "distance": "0",
+ "from": [
+ 2.317238,
+ 22.24435,
+ 1.6
+ ],
+ "to": [
+ 2.317238,
+ 22.24435,
+ 2.8
+ ]
+ },
+ "face_names": [
+ "F34:top",
+ "F38:top"
+ ],
+ "id": 68,
+ "name": "Extrude1",
+ "operation": "cut",
+ "param_names": [
+ "d77"
+ ],
+ "profiles": {
+ "indices": [
+ 3,
+ 6
+ ],
+ "type": "indices"
+ },
+ "sketch": 57,
+ "suppressed": false,
+ "targets": [
+ "Body7"
+ ],
+ "type": "extrude"
+ }
+ }
+ }
+ ]
+}