Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 475/509: Kernel rig: five cases outside fillets repeat a kept case's regime and go

jyviko9e1b41f90b69
diff --git a/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/expected.json b/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/expected.json
deleted file mode 100644
index b45f6281cc..0000000000
--- a/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/expected.json
+++ /dev/null
@@ -1,30 +0,0 @@
-{
- "sources": [],
- "what": "a knife follower on an eccentric disc cam, the cam turned 180 degrees",
- "source": "analytic",
- "method": "an eccentric disc cam (radius 10, centre 5 off its shaft on z through the origin) with a knife follower on a slider along +x through the shaft, touching at x = 15; the knife's distance at cam turn \u03c6 is s(\u03c6) = e cos \u03c6 + \u221a(R\u00b2 - e\u00b2 sin\u00b2 \u03c6) (e 5, R 10): rise s(0) - s(180) = 15 - 5 = 10; at 180 the knife is at s = 5, 10 mm in: the tappet's centre (20,0,2.5) -> (10,0,2.5)",
- "body_count": 3,
- "volume_mm3": 5770.796,
- "results": [
- {
- "step": 13,
- "json": {
- "lift": {
- "rise": 10.0
- }
- }
- },
- {
- "step": 15,
- "json": {
- "total": {
- "center_of_mass": [
- 10.0,
- 0.0,
- 2.5
- ]
- }
- }
- }
- ]
-}
diff --git a/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/recipe.json b/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/recipe.json
deleted file mode 100644
index 4ac5cfaf34..0000000000
--- a/tests/kernel-cases/assemblies/cov-joint-cam-eccentric-disc-half-turn/recipe.json
+++ /dev/null
@@ -1,212 +0,0 @@
-{
- "commands": [
- {
- "command": "solid.box",
- "params": {
- "length": 20,
- "width": 20,
- "height": 10,
- "corner": [
- -10,
- -10,
- -10
- ],
- "operation": "new",
- "body_name": "BaseBox"
- }
- },
- {
- "command": "solid.cylinder",
- "params": {
- "radius": 10,
- "height": 5,
- "base": [
- 5,
- 0,
- 0
- ],
- "axis": [
- 0,
- 0,
- 1
- ],
- "operation": "new",
- "body_name": "Disc"
- }
- },
- {
- "command": "solid.box",
- "params": {
- "length": 10,
- "width": 4,
- "height": 5,
- "corner": [
- 15,
- -2,
- 0
- ],
- "operation": "new",
- "body_name": "Tappet"
- }
- },
- {
- "command": "component.create",
- "params": {
- "name": "Base",
- "parent": "root",
- "activate": false
- }
- },
- {
- "command": "component.move_bodies",
- "params": {
- "bodies": [
- "BaseBox"
- ],
- "component": "Base"
- }
- },
- {
- "command": "component.create",
- "params": {
- "name": "Cam",
- "parent": "root",
- "activate": false
- }
- },
- {
- "command": "component.move_bodies",
- "params": {
- "bodies": [
- "Disc"
- ],
- "component": "Cam"
- }
- },
- {
- "command": "component.create",
- "params": {
- "name": "Follower",
- "parent": "root",
- "activate": false
- }
- },
- {
- "command": "component.move_bodies",
- "params": {
- "bodies": [
- "Tappet"
- ],
- "component": "Follower"
- }
- },
- {
- "command": "occurrence.ground",
- "params": {
- "occurrence": "Base:1",
- "grounded": true
- }
- },
- {
- "command": "joint.create",
- "params": {
- "type": "revolute",
- "name": "Shaft",
- "flip": true,
- "a": {
- "occurrence": "Base",
- "point": [
- 0,
- 0,
- 0
- ],
- "z": [
- 0,
- 0,
- 1
- ]
- },
- "b": {
- "occurrence": "Cam",
- "point": [
- 0,
- 0,
- 0
- ],
- "z": [
- 0,
- 0,
- 1
- ]
- },
- "quiet": true
- }
- },
- {
- "command": "joint.create",
- "params": {
- "type": "slider",
- "name": "Lift",
- "flip": true,
- "a": {
- "occurrence": "Base",
- "point": [
- 15,
- 0,
- 2.5
- ],
- "z": [
- 1,
- 0,
- 0
- ]
- },
- "b": {
- "occurrence": "Follower",
- "point": [
- 15,
- 0,
- 2.5
- ],
- "z": [
- 1,
- 0,
- 0
- ]
- },
- "quiet": true
- }
- },
- {
- "command": "joint.cam",
- "params": {
- "a": "Shaft",
- "b": "Lift",
- "profile": {
- "edges": [
- [
- 15,
- 0,
- 0
- ]
- ],
- "occurrence": "Cam"
- }
- }
- },
- {
- "command": "joint.drive",
- "params": {
- "joint": "Shaft",
- "quiet": true,
- "value": 180
- }
- },
- {
- "command": "occurrence.properties",
- "params": {
- "occurrence": "Follower:1"
- }
- }
- ]
-}
diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json
deleted file mode 100644
index 31ff60216e..0000000000
--- a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json
+++ /dev/null
@@ -1,10 +0,0 @@
-{
- "sources": [
- "tangency-labs/solidcraft#4095"
- ],
- "what": "a slab cut whose +x face stands 6.60e-05 mm (0.60 x the coincidence tolerance 1.10e-04) off a through-bore's wall (R=15), beside the bore",
- "source": "analytic",
- "method": "plate 90x60x20 minus the bore pi R^2*20 minus the notch (the slab 6x16 from z=12 up through the top z=20: 6*16*8 = 768), which the bore beside it does not change. V = 90*60*20 - pi*15^2*20 - 768. The bug removed about 5% too much with no warning",
- "body_count": 1,
- "volume_mm3": 93094.8331
-}
\ No newline at end of file
diff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json
deleted file mode 100644
index 723c9275fd..0000000000
--- a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json
+++ /dev/null
@@ -1,51 +0,0 @@
-{
- "commands": [
- {
- "command": "solid.box",
- "params": {
- "corner": [
- -45.0,
- -30.0,
- 0
- ],
- "length": 90,
- "width": 60,
- "height": 20,
- "body_name": "Plate"
- }
- },
- {
- "command": "solid.cylinder",
- "params": {
- "radius": 15,
- "height": 22,
- "base": [
- 0,
- 0,
- -1
- ],
- "operation": "cut",
- "targets": [
- "Plate"
- ]
- }
- },
- {
- "command": "solid.box",
- "params": {
- "corner": [
- -21.000066,
- -8,
- 12
- ],
- "length": 6,
- "width": 16,
- "height": 14,
- "operation": "cut",
- "targets": [
- "Plate"
- ]
- }
- }
- ]
-}
\ No newline at end of file
diff --git a/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/expected.json b/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/expected.json
deleted file mode 100644
index 73dc505673..0000000000
--- a/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/expected.json
+++ /dev/null
@@ -1,15 +0,0 @@
-{
- "sources": [],
- "what": "where a box edge crosses a plane square to it",
- "source": "analytic",
- "method": "box 40 x 30 x 20 with a corner at the origin (x 0..40, y 0..30, z 0..20): the edge y 0, z 0 along X meets x = 12 at (12,0,0)",
- "construction": {
- "P": {
- "point": [
- 12,
- 0,
- 0
- ]
- }
- }
-}
diff --git a/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/recipe.json b/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/recipe.json
deleted file mode 100644
index bff7913afc..0000000000
--- a/tests/kernel-cases/construction/cov-point-edge-plane-square-cut/recipe.json
+++ /dev/null
@@ -1,40 +0,0 @@
-{
- "commands": [
- {
- "command": "solid.box",
- "params": {
- "length": 40,
- "width": 30,
- "height": 20,
- "body_name": "Box"
- }
- },
- {
- "command": "construct.point.edge_plane",
- "params": {
- "edge": {
- "edge": [
- 20,
- 0,
- 0
- ]
- },
- "plane": {
- "plane": {
- "origin": [
- 12,
- 0,
- 0
- ],
- "normal": [
- 1,
- 0,
- 0
- ]
- }
- },
- "name": "P"
- }
- }
- ]
-}
diff --git a/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/expected.json b/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/expected.json
deleted file mode 100644
index 0e975cdfe8..0000000000
--- a/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/expected.json
+++ /dev/null
@@ -1,21 +0,0 @@
-{
- "sources": [
- "tangency-labs/solidcraft#349"
- ],
- "what": "a 2000 x 2500 tray with four 38.6 mm flanges at 90 degrees whose sketch is driven by parameters W and H, shrunk to 400 x 300 and unfolded (the solver leaves 1e-13 mm residuals: the planar region arrangement failed)",
- "source": "analytic",
- "method": "a flange of angle th, outer leg length Hf (height, from the virtual sharp along the flange) bends with allowance BA = th(R+Kt) and bend deduction BD = 2(R+t)tan(th/2) - BA; unfolded it lies in the base's plane and reaches Hf - BD beyond the base's edge. T = 2, R = 1, K = 0.5. BD(90) = 2.8584; the flat of the 400 x 300 tray is the same as built directly: reaches 35.7416 past each base edge",
- "body_count": 1,
- "bbox": {
- "min": [
- -35.7415926535898,
- -35.7415926535898,
- 0
- ],
- "max": [
- 435.7415926535898,
- 335.7415926535898,
- 2
- ]
- }
-}
\ No newline at end of file
diff --git a/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/recipe.json b/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/recipe.json
deleted file mode 100644
index f5853a1f37..0000000000
--- a/tests/kernel-cases/sheet-metal/349-unfold-a-tray-shrunk-by-a-parameter-90-degrees/recipe.json
+++ /dev/null
@@ -1,132 +0,0 @@
-{
- "commands": [
- {
- "command": "parameters.add",
- "params": {
- "name": "W",
- "expression": "2000 mm"
- }
- },
- {
- "command": "parameters.add",
- "params": {
- "name": "H",
- "expression": "2500 mm"
- }
- },
- {
- "command": "sheet.manage_rules",
- "params": {
- "name": "AL2",
- "thickness": "2 mm",
- "active": true,
- "bend_radius": "1 mm",
- "k_factor": 0.5
- }
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": "XY",
- "name": "Tray"
- }
- },
- {
- "command": "sketch.rectangle.two_point",
- "params": {
- "p0": [
- 0,
- 0
- ],
- "p1": [
- 2000,
- 2500
- ]
- }
- },
- {
- "command": "sketch.constraint.fix",
- "params": {
- "entities": [
- "p1"
- ]
- }
- },
- {
- "command": "sketch.dimension",
- "params": {
- "entities": [
- "l1"
- ],
- "value": "W"
- }
- },
- {
- "command": "sketch.dimension",
- "params": {
- "entities": [
- "l2"
- ],
- "value": "H"
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "sheet.flange",
- "params": {
- "type": "base",
- "sketch": "Tray"
- }
- },
- {
- "command": "sheet.flange",
- "params": {
- "type": "edge",
- "edges": [
- [
- 1000,
- 0,
- 2
- ],
- [
- 2000,
- 1250,
- 2
- ],
- [
- 1000,
- 2500,
- 2
- ],
- [
- 0,
- 1250,
- 2
- ]
- ],
- "height": 38.6,
- "angle": 90
- }
- },
- {
- "command": "parameters.change",
- "params": {
- "changes": {
- "W": "400 mm",
- "H": "300 mm"
- }
- }
- },
- {
- "command": "sheet.unfold",
- "params": {}
- },
- {
- "command": "inspect.measure",
- "params": {}
- }
- ]
-}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.json
deleted file mode 100644
index 89fba1fe93..0000000000
--- a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/expected.json
+++ /dev/null
@@ -1,11 +0,0 @@
-{
- "sources": [
- "tangency-labs/solidcraft#1391",
- "tangency-labs/solidcraft#1556"
- ],
- "what": "a half tube (6 mm wall, inner radius tapering 60 to 75 mm) lofted through 5 sections along an R300 bend of 40 degrees, with an 8 mm half-annulus flange (inner radius +3 into the wall, outer +25 beyond it) extruded from the end plane outward and joined: the flange face lies in the end plane (\"Union: no result\")",
- "source": "analytic",
- "method": "each section is a half annulus in a plane through the bend axis, centred on the path, so Pappus holds with the section area A(t) = pi/2 (12 r(t) + 36), r(t) = 60 + 15 t: V_tube = R theta * pi/2 (12 * 67.5 + 36), R = 300, theta = 40 degrees = 278322.8. The flange stands outside the tube end plane and touches the tube only along the coplanar end face, so V = V_tube + V_flange, V_flange = pi/2 (106^2 - 78^2) 8 = 64741.9. One body.",
- "body_count": 1,
- "volume_mm3": 343064.7855158983
-}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.json b/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.json
deleted file mode 100644
index b60b9bf85a..0000000000
--- a/tests/kernel-cases/sweeps/1391-flange-flush-on-the-end-of-a-bent-tapered-loft-40deg/recipe.json
+++ /dev/null
@@ -1,599 +0,0 @@
-{
- "commands": [
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 0.0,
- 0.0,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.0,
- -1.0,
- 0
- ]
- },
- "name": "S0"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -66.0
- ],
- "through": [
- 66.0,
- 0
- ],
- "end": [
- 0,
- 66.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 66.0
- ],
- [
- 0,
- 60.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 60.0
- ],
- "through": [
- 60.0,
- 0
- ],
- "end": [
- 0,
- -60.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -60.0
- ],
- [
- 0,
- -66.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 52.0944533,
- 4.557674096,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.173648178,
- -0.984807753,
- 0
- ]
- },
- "name": "S1"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -69.75
- ],
- "through": [
- 69.75,
- 0
- ],
- "end": [
- 0,
- 69.75
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 69.75
- ],
- [
- 0,
- 63.75
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 63.75
- ],
- "through": [
- 63.75,
- 0
- ],
- "end": [
- 0,
- -63.75
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -63.75
- ],
- [
- 0,
- -69.75
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 102.606042998,
- 18.092213764,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.342020143,
- -0.939692621,
- 0
- ]
- },
- "name": "S2"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -73.5
- ],
- "through": [
- 73.5,
- 0
- ],
- "end": [
- 0,
- 73.5
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 73.5
- ],
- [
- 0,
- 67.5
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 67.5
- ],
- "through": [
- 67.5,
- 0
- ],
- "end": [
- 0,
- -67.5
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -67.5
- ],
- [
- 0,
- -73.5
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 150.0,
- 40.192378865,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.5,
- -0.866025404,
- 0
- ]
- },
- "name": "S3"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -77.25
- ],
- "through": [
- 77.25,
- 0
- ],
- "end": [
- 0,
- 77.25
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 77.25
- ],
- [
- 0,
- 71.25
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 71.25
- ],
- "through": [
- 71.25,
- 0
- ],
- "end": [
- 0,
- -71.25
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -71.25
- ],
- [
- 0,
- -77.25
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 192.836282906,
- 70.186667064,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.64278761,
- -0.766044443,
- 0
- ]
- },
- "name": "S4"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -81.0
- ],
- "through": [
- 81.0,
- 0
- ],
- "end": [
- 0,
- 81.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 81.0
- ],
- [
- 0,
- 75.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 75.0
- ],
- "through": [
- 75.0,
- 0
- ],
- "end": [
- 0,
- -75.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -75.0
- ],
- [
- 0,
- -81.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "solid.loft",
- "params": {
- "sections": [
- {
- "sketch": "S0"
- },
- {
- "sketch": "S1"
- },
- {
- "sketch": "S2"
- },
- {
- "sketch": "S3"
- },
- {
- "sketch": "S4"
- }
- ],
- "operation": "new",
- "name": "TubeLoft",
- "body_name": "Tube"
- }
- },
- {
- "command": "sketch.create",
- "params": {
- "plane": {
- "origin": [
- 192.836282906,
- 70.186667064,
- 0.0
- ],
- "x_dir": [
- 0,
- 0,
- 1
- ],
- "y_dir": [
- 0.64278761,
- -0.766044443,
- 0
- ]
- },
- "name": "Flange"
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- -106.0
- ],
- "through": [
- 106.0,
- 0
- ],
- "end": [
- 0,
- 106.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- 106.0
- ],
- [
- 0,
- 78.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.arc.three_point",
- "params": {
- "start": [
- 0,
- 78.0
- ],
- "through": [
- 78.0,
- 0
- ],
- "end": [
- 0,
- -78.0
- ]
- }
- },
- {
- "command": "sketch.line",
- "params": {
- "points": [
- [
- 0,
- -78.0
- ],
- [
- 0,
- -106.0
- ]
- ],
- "infer": false
- }
- },
- {
- "command": "sketch.finish",
- "params": {}
- },
- {
- "command": "solid.extrude",
- "params": {
- "sketch": "Flange",
- "distance": 8.0,
- "operation": "join",
- "targets": [
- "Tube"
- ],
- "name": "JoinFlange"
- }
- }
- ]
-}
\ No newline at end of file