SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 40/509: kernel-cases: booleans from #2896-#3383 (11 cases) and the skipped list
bherbruck9f47145da772
diff --git a/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/expected.json b/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/expected.jsonnew file mode 100644index 0000000000..9756d66e8e--- /dev/null+++ b/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#2896"+ ],+ "what": "a join of a ring and an arm whose R5 convex tip stops 0.01 mm short of the ring's outer wall: nothing overlaps, so nothing fuses",+ "source": "analytic",+ "method": "ring pi*(30^2-24^2)*6 and arm 6*(350+12.5*pi) are 0.01 mm apart (arm tip at x=30.01): the join has nothing to fuse, so the two bodies stay apart (body_count 2) and V is the sum of the two",+ "body_count": 2,+ "volume_mm3": 8442.875567597792+}diff --git a/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/recipe.json b/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/recipe.jsonnew file mode 100644index 0000000000..56cd339b70--- /dev/null+++ b/tests/kernel-cases/booleans/2896-join-arm-end-near-ring-wall-gap/recipe.json@@ -0,0 +1,74 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 30,+ "height": 6,+ "base": [+ 0,+ 0,+ 0+ ],+ "body_name": "Ring"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 24,+ "height": 6,+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "cut",+ "targets": [+ "Ring"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 35,+ "width": 10,+ "height": 6,+ "corner": [+ 35.01,+ -5,+ 0+ ],+ "operation": "new",+ "body_name": "Arm"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 5,+ "height": 6,+ "base": [+ 35.01,+ 0,+ 0+ ],+ "operation": "join",+ "targets": [+ "Arm"+ ]+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Ring",+ "tools": [+ "Arm"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/expected.json b/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/expected.jsonnew file mode 100644index 0000000000..12a53cb6b2--- /dev/null+++ b/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/expected.json@@ -0,0 +1,13 @@+{+ "sources": [+ "tangency-labs/solidcraft#2904"+ ],+ "what": "a countersunk hole in a small plate, near a rounded corner, while an unrelated body sits 120 mm away: only the plate may change, and the countersink must be complete",+ "source": "analytic",+ "method": "lid: rounded rectangle 80.4x22.9 (r2) x 2 thick = 2*(80.4*22.9 - (4-pi)*2^2) = 3675.4527. Hole at (-38.7,-8.35), d2.4 through, countersink d4.2 at 90 deg (a cone of half angle 45: radius 2.1 at the top face z=9.1 shrinking to 1.2 at depth 0.9). Removed = Int over the plate around the hole of the tool's depth: 2 for r<=1.2, 2.1-r for 1.2<r<2.1, with the plate bounded by the corner arc (centre (-38.2,-7.85), r2) which clips the countersink; integrated numerically in polar coordinates = 11.8482. The distant box stays 1000. Total = lid - removed + 1000 (tolerance 1e-4: the countersink's missing part is 4.5 mm^3)",+ "body_count": 2,+ "volume_mm3": 4663.6045492287185,+ "tolerance": {+ "rel": 0.0001+ }+}diff --git a/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/recipe.json b/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/recipe.jsonnew file mode 100644index 0000000000..3476096ebd--- /dev/null+++ b/tests/kernel-cases/booleans/2904-countersunk-hole-with-distant-body/recipe.json@@ -0,0 +1,66 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": 7.1+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ -40.2,+ -9.85+ ],+ "p1": [+ 40.2,+ 13.05+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 2,+ "operation": "new",+ "body_name": "lid"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 10,+ "width": 10,+ "height": 10,+ "corner": [+ 158,+ 0,+ -5.9+ ],+ "operation": "new",+ "body_name": "case"+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ -38.7,+ -8.35,+ 9.1+ ],+ "diameter": 2.4,+ "type": "countersink",+ "cs_diameter": 4.2,+ "cs_angle": "90 deg"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/expected.json b/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/expected.jsonnew file mode 100644index 0000000000..a4bc0a70a0--- /dev/null+++ b/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3027"+ ],+ "what": "a pin (r4) seated line to line in a bore (r4, exactly coaxial) of a bush: the two cylinder walls coincide",+ "source": "analytic",+ "method": "the pin exactly fills the bore (same radius, same axis, same length 10), so the join is the plain block 30x30x10: V = 9000, one body, bbox x,y +-15, z 0..10",+ "body_count": 1,+ "volume_mm3": 9000.0,+ "bbox": {+ "min": [+ -15,+ -15,+ 0+ ],+ "max": [+ 15,+ 15,+ 10+ ]+ }+}diff --git a/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/recipe.json b/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/recipe.jsonnew file mode 100644index 0000000000..3399c78b42--- /dev/null+++ b/tests/kernel-cases/booleans/3027-pin-seated-line-to-line-in-bore/recipe.json@@ -0,0 +1,58 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 30,+ "width": 30,+ "height": 10,+ "corner": [+ -15,+ -15,+ 0+ ],+ "body_name": "Bush"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4,+ "height": 10,+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "cut",+ "targets": [+ "Bush"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4,+ "height": 10,+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "new",+ "body_name": "Pin"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Bush",+ "tools": [+ "Pin"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/expected.json b/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/expected.jsonnew file mode 100644index 0000000000..9ec63ef8a7--- /dev/null+++ b/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3092",+ "tangency-labs/solidcraft#2844"+ ],+ "what": "a ring (r 19.6/20.8, 20 tall) joined onto the top of an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes: the ring's foot crosses many hole edges",+ "source": "analytic",+ "method": "plate: 80*80*1.2 - 81*6.4^2*1.2 (holes on an 8 mm pitch, centred); ring: pi*(20.8^2-19.6^2)*20; the ring stands on the plate top (z 1.2..21.2) so they share only a contact face: V = sum. One body",+ "body_count": 1,+ "volume_mm3": 6744.77623692066+}diff --git a/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/recipe.json b/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/recipe.jsonnew file mode 100644index 0000000000..4943b36bff--- /dev/null+++ b/tests/kernel-cases/booleans/3092-ring-on-perforated-plate/recipe.json@@ -0,0 +1,1145 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -40,+ -40+ ],+ "p1": [+ 40,+ 40+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -35.2+ ],+ "p1": [+ -28.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -27.2+ ],+ "p1": [+ -28.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -19.2+ ],+ "p1": [+ -28.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -11.2+ ],+ "p1": [+ -28.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -3.2+ ],+ "p1": [+ -28.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 4.8+ ],+ "p1": [+ -28.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 12.8+ ],+ "p1": [+ -28.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 20.8+ ],+ "p1": [+ -28.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 28.8+ ],+ "p1": [+ -28.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -35.2+ ],+ "p1": [+ -20.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -27.2+ ],+ "p1": [+ -20.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -19.2+ ],+ "p1": [+ -20.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -11.2+ ],+ "p1": [+ -20.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -3.2+ ],+ "p1": [+ -20.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 4.8+ ],+ "p1": [+ -20.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 12.8+ ],+ "p1": [+ -20.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 20.8+ ],+ "p1": [+ -20.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 28.8+ ],+ "p1": [+ -20.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -35.2+ ],+ "p1": [+ -12.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -27.2+ ],+ "p1": [+ -12.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -19.2+ ],+ "p1": [+ -12.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -11.2+ ],+ "p1": [+ -12.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -3.2+ ],+ "p1": [+ -12.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 4.8+ ],+ "p1": [+ -12.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 12.8+ ],+ "p1": [+ -12.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 20.8+ ],+ "p1": [+ -12.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 28.8+ ],+ "p1": [+ -12.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -35.2+ ],+ "p1": [+ -4.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -27.2+ ],+ "p1": [+ -4.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -19.2+ ],+ "p1": [+ -4.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -11.2+ ],+ "p1": [+ -4.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -3.2+ ],+ "p1": [+ -4.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 4.8+ ],+ "p1": [+ -4.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 12.8+ ],+ "p1": [+ -4.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 20.8+ ],+ "p1": [+ -4.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 28.8+ ],+ "p1": [+ -4.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -35.2+ ],+ "p1": [+ 3.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -27.2+ ],+ "p1": [+ 3.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -19.2+ ],+ "p1": [+ 3.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -11.2+ ],+ "p1": [+ 3.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -3.2+ ],+ "p1": [+ 3.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 4.8+ ],+ "p1": [+ 3.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 12.8+ ],+ "p1": [+ 3.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 20.8+ ],+ "p1": [+ 3.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 28.8+ ],+ "p1": [+ 3.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -35.2+ ],+ "p1": [+ 11.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -27.2+ ],+ "p1": [+ 11.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -19.2+ ],+ "p1": [+ 11.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -11.2+ ],+ "p1": [+ 11.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -3.2+ ],+ "p1": [+ 11.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 4.8+ ],+ "p1": [+ 11.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 12.8+ ],+ "p1": [+ 11.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 20.8+ ],+ "p1": [+ 11.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 28.8+ ],+ "p1": [+ 11.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -35.2+ ],+ "p1": [+ 19.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -27.2+ ],+ "p1": [+ 19.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -19.2+ ],+ "p1": [+ 19.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -11.2+ ],+ "p1": [+ 19.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -3.2+ ],+ "p1": [+ 19.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 4.8+ ],+ "p1": [+ 19.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 12.8+ ],+ "p1": [+ 19.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 20.8+ ],+ "p1": [+ 19.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 28.8+ ],+ "p1": [+ 19.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -35.2+ ],+ "p1": [+ 27.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -27.2+ ],+ "p1": [+ 27.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -19.2+ ],+ "p1": [+ 27.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -11.2+ ],+ "p1": [+ 27.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -3.2+ ],+ "p1": [+ 27.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 4.8+ ],+ "p1": [+ 27.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 12.8+ ],+ "p1": [+ 27.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 20.8+ ],+ "p1": [+ 27.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 28.8+ ],+ "p1": [+ 27.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -35.2+ ],+ "p1": [+ 35.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -27.2+ ],+ "p1": [+ 35.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -19.2+ ],+ "p1": [+ 35.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -11.2+ ],+ "p1": [+ 35.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -3.2+ ],+ "p1": [+ 35.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 4.8+ ],+ "p1": [+ 35.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 12.8+ ],+ "p1": [+ 35.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 20.8+ ],+ "p1": [+ 35.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 28.8+ ],+ "p1": [+ 35.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 1.2,+ "profiles": [+ {+ "point": [+ -39,+ -39+ ]+ }+ ],+ "operation": "new",+ "body_name": "Plate"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": 1.2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20.8+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 19.6+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 20,+ "profiles": [+ {+ "point": [+ 20.2,+ 0+ ]+ }+ ],+ "operation": "join",+ "targets": [+ "Plate"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/expected.json b/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/expected.jsonnew file mode 100644index 0000000000..58a86b849b--- /dev/null+++ b/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3175"+ ],+ "what": "a cut over the bottom edge of a revolved cylinder that holds a sealed spherical void on its axis: the body must not come out empty or refused",+ "source": "analytic",+ "method": "revolved cylinder r24 h60 minus the sealed sphere r2 at z=30 minus the box x 20..30, y -10..10, z -5..10 where it meets the cylinder: {x>=20, |y|<=10, x^2+y^2<=24^2} is Int from -10 to 10 of (sqrt(576-y^2) - 20) dy = 10*sqrt(476) + 576*asin(10/24) - 400 = 65.725 over z in 0..10. V = pi*24^2*60 - 4/3*pi*2^3 - 10*area = 107882.68. One body that holds two shells (outer and the void), so valid is false: the rig reads more than one shell as not a solid",+ "valid": false,+ "body_count": 1,+ "volume_mm3": 107882.68287918373+}diff --git a/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/recipe.json b/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/recipe.jsonnew file mode 100644index 0000000000..848d7d5aab--- /dev/null+++ b/tests/kernel-cases/booleans/3175-cut-beside-sealed-void/recipe.json@@ -0,0 +1,113 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XZ"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 24,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 24,+ 0+ ],+ [+ 24,+ -60+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 24,+ -60+ ],+ [+ 0,+ -60+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -60+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": "y",+ "body_name": "Can"+ }+ },+ {+ "command": "solid.sphere",+ "params": {+ "radius": 2,+ "center": [+ 0,+ 0,+ 30+ ],+ "operation": "cut",+ "targets": [+ "Can"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 10,+ "width": 20,+ "height": 15,+ "corner": [+ 20,+ -10,+ -5+ ],+ "operation": "cut",+ "targets": [+ "Can"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/expected.json b/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/expected.jsonnew file mode 100644index 0000000000..9d719eb894--- /dev/null+++ b/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/expected.json@@ -0,0 +1,9 @@+{+ "sources": [+ "tangency-labs/solidcraft#3243"+ ],+ "what": "a join of a cylindrical rim (r 15.27..16.65, to z=5) and a rounded tooth trimmed to the same two cylinders that overlaps it by 0.01 mm in Z",+ "source": "invariants",+ "method": "the tooth (z 4.99..7.7) and the rim (z 1.76..5) overlap in z 4.99..5 with positive volume, so the join succeeds and gives one closed solid; the result is larger than the rim alone. No closed form is derived for the tooth, so only the outcome, validity and the body count are graded",+ "body_count": 1+}diff --git a/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/recipe.json b/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/recipe.jsonnew file mode 100644index 0000000000..8b5a733336--- /dev/null+++ b/tests/kernel-cases/booleans/3243-rim-and-rounded-tooth-join/recipe.json@@ -0,0 +1,145 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 16.65,+ "height": 5,+ "body_name": "Base"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 15.27,+ "height": 4,+ "base": [+ 0,+ 0,+ 1.76+ ],+ "operation": "cut",+ "targets": [+ "Base"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ -1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -0.1706475844770042,+ 7.63270030627277+ ],+ [+ -3,+ 4.99+ ],+ [+ 3,+ 4.99+ ],+ [+ 0.1706475844770042,+ 7.63270030627277+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 0.1706475844770042,+ 7.63270030627277+ ],+ "through": [+ 0,+ 7.7+ ],+ "end": [+ -0.1706475844770042,+ 7.63270030627277+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 1.6875953835063608,+ "start_offset": 14.962404616493638,+ "operation": "new",+ "body_name": "Tooth"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 15.27,+ "height": 2.73,+ "base": [+ 0,+ 0,+ 4.98+ ],+ "operation": "cut",+ "targets": [+ "Tooth"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 16.65,+ "height": 2.73,+ "base": [+ 0,+ 0,+ 4.98+ ],+ "operation": "intersect",+ "targets": [+ "Tooth"+ ]+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Base",+ "tools": [+ "Tooth"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/expected.json b/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/expected.jsonnew file mode 100644index 0000000000..ee8d33cc02--- /dev/null+++ b/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#3303",+ "tangency-labs/solidcraft#3309"+ ],+ "what": "cutting the complete circular top face of a widening conical frustum inward: the cylindrical tool touches the cone only at its rim",+ "source": "analytic",+ "method": "frustum r 1 (bottom) -> 5 (top) over 10 mm (slope 0.4); removing the top 4.4 mm leaves height 5.6 with radii 1 and 1+0.4*5.6 = 3.24: V = pi*h*(r0^2 + r0*r1 + r1^2)/3 = pi*5.6*(1 + 3.24 + 3.24^2)/3. Faces: cone wall, bottom disc, new top disc = 3; bbox z 0..5.6",+ "body_count": 1,+ "volume_mm3": 86.42580033088389,+ "faces": 3,+ "bbox": {+ "min": [+ -3.24,+ -3.24,+ 0+ ],+ "max": [+ 3.24,+ 3.24,+ 5.6+ ]+ }+}diff --git a/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/recipe.json b/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/recipe.jsonnew file mode 100644index 0000000000..6380ac7727--- /dev/null+++ b/tests/kernel-cases/booleans/3303-inward-cut-of-frustum-top-face/recipe.json@@ -0,0 +1,94 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XZ"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 1,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 1,+ 0+ ],+ [+ 5,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 5,+ -10+ ],+ [+ 0,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ -10+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": "y",+ "body_name": "Cone"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 2,+ 0,+ 10+ ],+ "face_body": "Cone",+ "distance": -4.4,+ "operation": "cut"+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/expected.json b/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/expected.jsonnew file mode 100644index 0000000000..9ce6f7fad4--- /dev/null+++ b/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3327",+ "tangency-labs/solidcraft#2963"+ ],+ "what": "a cut whose end face lies exactly in a side wall of its target (a window notch): the cut must open the wall, with no skin left in it",+ "source": "analytic",+ "method": "block 30x30x10 minus the box x 20..30, y 10..20, z 3..7, whose end x=30 is flush with the block's side: V = 9000 - 400 = 8600. Faces: top, bottom, 4 sides (the x=30 side with the window as an inner loop) + notch floor, ceiling, two side walls and end wall = 11",+ "body_count": 1,+ "volume_mm3": 8600.0,+ "faces": 11+}diff --git a/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/recipe.json b/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/recipe.jsonnew file mode 100644index 0000000000..4f0a7ef9c3--- /dev/null+++ b/tests/kernel-cases/booleans/3327-cut-ending-flush-with-side-wall/recipe.json@@ -0,0 +1,30 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 30,+ "width": 30,+ "height": 10,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 10,+ "width": 10,+ "height": 4,+ "corner": [+ 20,+ 10,+ 3+ ],+ "operation": "cut",+ "targets": [+ "Block"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/expected.json b/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/expected.jsonnew file mode 100644index 0000000000..1dea5b859b--- /dev/null+++ b/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3378"+ ],+ "what": "a circular pattern of a join whose two targets (rim and hub) were merged into one body by that join",+ "source": "analytic",+ "method": "ring pi*(66^2-63^2)*3 + hub pi*12^2*3 + 5 spokes. A spoke is the box 53x3x2.5 (x 11..64, z +-1.25, y 0..3; the issue starts it at x=12, tangent to the hub, which joins the hub by a line only, so it starts at 11 here to overlap it). It overlaps the ring where x >= sqrt(63^2-z^2): 7.531, and the hub where x <= sqrt(12^2-z^2): 7.337 (both = width * Int over z in -1.25..1.25). Neighbouring spokes (72 deg apart) do not meet. V = ring + hub + 5*(397.5 - overlaps), one body",+ "body_count": 1,+ "volume_mm3": 6917.717209884256+}diff --git a/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/recipe.json b/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/recipe.jsonnew file mode 100644index 0000000000..b5d94e706f--- /dev/null+++ b/tests/kernel-cases/booleans/3378-circular-pattern-of-join-that-merged-targets/recipe.json@@ -0,0 +1,78 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 66,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "body_name": "rim"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 63,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "operation": "cut",+ "targets": [+ "rim"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 12,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "body_name": "hub"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 53,+ "width": 3,+ "height": 2.5,+ "corner": [+ 11,+ 0,+ -1.25+ ],+ "operation": "join",+ "targets": [+ "rim",+ "hub"+ ],+ "name": "spoke"+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "spoke"+ ],+ "axis": "Y",+ "count": 5+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/expected.json b/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/expected.jsonnew file mode 100644index 0000000000..f8ca6d5642--- /dev/null+++ b/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3379"+ ],+ "what": "a circular pattern (count 5) of a spoke thinner than the ring it joins (faces 0.5 mm inside the rim and hub faces)",+ "source": "analytic",+ "method": "ring pi*(66^2-63^2)*3 + hub pi*12^2*3 + 5 spokes. A spoke is the box 53x2x2.5 (x 11..64, z +-1.25, y 0.5..2.5; the issue starts it at x=12, tangent to the hub, which joins the hub by a line only, so it starts at 11 here to overlap it). It overlaps the ring by 5.021 and the hub by 4.891 (width * Int over z in -1.25..1.25 of 64 - sqrt(63^2-z^2) and of sqrt(12^2-z^2) - 11). V = ring + hub + 5*(265 - overlaps), one body",+ "body_count": 1,+ "volume_mm3": 6279.997172312351+}diff --git a/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/recipe.json b/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/recipe.jsonnew file mode 100644index 0000000000..6e61872f99--- /dev/null+++ b/tests/kernel-cases/booleans/3379-circular-pattern-of-thin-spoke-on-ring/recipe.json@@ -0,0 +1,80 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 66,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "body_name": "rim"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 63,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "operation": "cut",+ "targets": [+ "rim"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 12,+ "height": 3,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Y",+ "operation": "join",+ "targets": [+ "rim"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 53,+ "width": 2,+ "height": 2.5,+ "corner": [+ 11,+ 0.5,+ -1.25+ ],+ "operation": "join",+ "targets": [+ "rim"+ ],+ "name": "spoke"+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "spoke"+ ],+ "axis": "Y",+ "count": 5+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/expected.json b/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/expected.jsonnew file mode 100644index 0000000000..b278b4b145--- /dev/null+++ b/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3383"+ ],+ "what": "a root body joined into a body inside a component whose occurrence is turned a quarter turn: the tool must stay where it is in the world",+ "source": "analytic",+ "method": "Plate 40x40x10 (x -20..20, y -20..20, z 0..10) turned 90 deg about X becomes x -20..20, y -10..0, z -20..20. Boss is world x -5..5, y -5..5, z -25..-15. Overlap = 10 x 5 x 5 = 250 (y -5..0, z -20..-15). Union = 16000 + 1000 - 250 = 16750, one body; bbox x -20..20, y -10..5, z -25..20",+ "body_count": 1,+ "volume_mm3": 16750.0,+ "bbox": {+ "min": [+ -20,+ -10,+ -25+ ],+ "max": [+ 20,+ 5,+ 20+ ]+ }+}diff --git a/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/recipe.json b/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/recipe.jsonnew file mode 100644index 0000000000..20b7d7745e--- /dev/null+++ b/tests/kernel-cases/booleans/3383-combine-tool-into-rotated-occurrence/recipe.json@@ -0,0 +1,70 @@+{+ "commands": [+ {+ "command": "component.create",+ "params": {+ "name": "Part"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 40,+ "height": 10,+ "corner": [+ -20,+ -20,+ 0+ ],+ "body_name": "Plate"+ }+ },+ {+ "command": "component.activate",+ "params": {+ "component": "root"+ }+ },+ {+ "command": "occurrence.move",+ "params": {+ "occurrence": "Part:1",+ "axis": [+ 1,+ 0,+ 0+ ],+ "angle": "90 deg"+ }+ },+ {+ "command": "component.capture_position",+ "params": {}+ },+ {+ "command": "solid.box",+ "params": {+ "length": 10,+ "width": 10,+ "height": 10,+ "corner": [+ -5,+ -5,+ -25+ ],+ "operation": "new",+ "body_name": "Boss"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Plate",+ "tools": [+ "Boss"+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/booleans/skipped-b.json b/tests/kernel-cases/booleans/skipped-b.jsonnew file mode 100644index 0000000000..fa29b07797--- /dev/null+++ b/tests/kernel-cases/booleans/skipped-b.json@@ -0,0 +1,338 @@+[+ {+ "source": "tangency-labs/solidcraft#2541",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2543",+ "why": "other area: import (mesh body from an imported file: a boolean needs a solid body, by design)"+ },+ {+ "source": "tangency-labs/solidcraft#2551",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2553",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2565",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2566",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2574",+ "why": "feature request, not a wrong result (a hexagonal or skip-instance pattern option)"+ },+ {+ "source": "tangency-labs/solidcraft#2581",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2586",+ "why": "needs the user's design: draft refused on faces next to the drafted walls, only the command is reported"+ },+ {+ "source": "tangency-labs/solidcraft#2599",+ "why": "other area: assemblies (joint.as_built does not follow a parameter change), not kernel geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2602",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2610",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2696",+ "why": "CI/test infrastructure only (xtask skips the nightly boolean_props tests), no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2740",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2750",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2765",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2766",+ "why": "needs the user's design: draft refused on faces next to the drafted walls, only the command is reported"+ },+ {+ "source": "tangency-labs/solidcraft#2770",+ "why": "needs the user's design (a 22 KB Gridfinity base shared with the author's permission); not rebuilt or committed"+ },+ {+ "source": "tangency-labs/solidcraft#2783",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2798",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2799",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2803",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2843",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2873",+ "why": "UI/feature request: press-pull on a round face has no selection path; no wrong geometry to grade"+ },+ {+ "source": "tangency-labs/solidcraft#2882",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2885",+ "why": "UI: the pattern got a construction axis name the command does not accept; no wrong geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2887",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2890",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2911",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2941",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2946",+ "why": "other area: import (B-spline patch and loosely-fitted imported faces; no small public geometry rebuilt)"+ },+ {+ "source": "tangency-labs/solidcraft#2949",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2950",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2959",+ "why": "UI: selecting the whole sketch line (with its fillet) as a split tool; no wrong geometry"+ },+ {+ "source": "tangency-labs/solidcraft#2965",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2970",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2973",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2979",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#2997",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3007",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3019",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3026",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3034",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3035",+ "why": "perf only: the motivating design is private, no wrong result"+ },+ {+ "source": "tangency-labs/solidcraft#3038",+ "why": "other area: import (mesh body from an imported file: a boolean needs a solid body, by design)"+ },+ {+ "source": "tangency-labs/solidcraft#3042",+ "why": "UI: no visual feedback when a patterned hole misses the surface; no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3050",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3051",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3056",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3079",+ "why": "needs the user's design: the sketch loop is not closed, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3090",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3100",+ "why": "other area: import (split of a body imported from STEP; the file is not available)"+ },+ {+ "source": "tangency-labs/solidcraft#3101",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3112",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3117",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3118",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3130",+ "why": "other area: threads"+ },+ {+ "source": "tangency-labs/solidcraft#3132",+ "why": "feature request (pick target bodies in Edit Extrude); no wrong result"+ },+ {+ "source": "tangency-labs/solidcraft#3138",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3147",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3149",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3157",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3176",+ "why": "needs the user's design: draft refused on faces next to the drafted walls, only the command is reported"+ },+ {+ "source": "tangency-labs/solidcraft#3185",+ "why": "other area: crashes (a boolean retry hang on a broken candidate; the design from the report is private)"+ },+ {+ "source": "tangency-labs/solidcraft#3192",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3193",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3194",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3205",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3211",+ "why": "no description, only a screenshot or nothing: no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3212",+ "why": "other area: import (an imported assembly, nested shells)"+ },+ {+ "source": "tangency-labs/solidcraft#3227",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3232",+ "why": "no description or geometry: only that an intersect does not seem to work"+ },+ {+ "source": "tangency-labs/solidcraft#3247",+ "why": "feature request, not a wrong result (a hexagonal or skip-instance pattern option)"+ },+ {+ "source": "tangency-labs/solidcraft#3251",+ "why": "other area: import (mesh body from an imported file: a boolean needs a solid body, by design)"+ },+ {+ "source": "tangency-labs/solidcraft#3255",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3271",+ "why": "UI only: no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3276",+ "why": "other area: fillets (the failing step is the fillet/chamfer after three extrudes; no dimensions given)"+ },+ {+ "source": "tangency-labs/solidcraft#3279",+ "why": "sketch pattern editing (sketch.pattern.circular), not solid geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3293",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3302",+ "why": "UI: the pattern was started with nothing selected; no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3324",+ "why": "other area: sheet metal (flat pattern and DXF ignore non-sheet features)"+ },+ {+ "source": "tangency-labs/solidcraft#3374",+ "why": "other area: import (mesh body from an imported file: a boolean needs a solid body, by design)"+ },+ {+ "source": "tangency-labs/solidcraft#3396",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ },+ {+ "source": "tangency-labs/solidcraft#3403",+ "why": "needs the user's design: only the failing command's parameters are reported, no geometry to rebuild"+ }+]