SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Release 0.7.0 (#508)
bherbrucka9879fa66804
diff --git a/.github/release-notes.md b/.github/release-notes.mdindex 63db1218a3..441f16170c 100644--- a/.github/release-notes.md+++ b/.github/release-notes.md@@ -5,58 +5,53 @@ parameter to watch the timeline rebuild. [Documentation](https://bherbruck.githu[issues](https://github.com/bherbruck/solidcraft/issues). AI agents can model with it over MCP:`solidcraft-cli mcp` ([how](https://bherbruck.github.io/solidcraft/guide/mcp.html)).-**Why 0.6:** this is a minor bump because two things change the files you work with: the-rename to SolidCraft and the new design file format. Files from earlier builds open fine, but-builds 0.5 and older can't open designs saved by 0.6.+**Why 0.7:** this is a minor bump because the design file format moved to version 15 (sketches+on cylinder caps and sheet metal panels need new references), and because it adds new features.**What's new**-- **New design file format.** Saves are a zip container by default; plain JSON is still one- click away (details below).-- **Sheet metal:** flange corners close at any angle, and cut-outs fold across bends at any- angle, including curved bends.-- **Crash reports:** after a crash, Help ▸ Crash Reports… shows what happened with a ready-to-file- issue draft. Reports stay on your computer; nothing is sent. `solidcraft-cli crashes` lists and- replays them.-- **Snap package** for x86_64 and aarch64 on every release, alongside the AppImage, `.deb`, `.rpm`- and Flatpak.-- **Trackpad navigation** (two-finger pan, pinch zoom), a fillet option that shrinks a radius too- big for its edges, cleaner dialogs and toolbar panels, and the unfinished Generative Design- workspace is gone.-- Many modelling fixes: extrude/revolve in moved components, To Object picks, very flat arcs,- touching lines and arcs in booleans, and `solidcraft-cli run` now fails when a feature fails.+- **Sketching on stacked extrudes works again.** Creating a sketch on the top face of an extrude+ stacked on another failed with "operation failed" since 0.3+ ([#489](https://github.com/bherbruck/solidcraft/issues/489)). It's fixed, and every flat face+ of the test models is now checked for this on every change.+- **Select Other:** hold or right-click to pick something hidden under something else; click+ again to cycle through what's underneath.+- **Tabs are named after their file** instead of "Untitled".+- **Modelling:** a flange angle and height per edge, Patch fills non-planar loops, sketches on+ cylinder caps and on sheet metal faces, and a feature rename updates everything that refers to+ it.+- **Fixes:** revolve with edges on the axis, shell and fillet with small rounds, Join keeps face+ attachments, and STEP export writes each lump of a body as its own solid.+- **Navigation and UI:** orbiting from empty space turns around the visible geometry, Ctrl+drag+ orbits in every preset, toolbar drops land across labels and gaps, Combine previews before OK,+ and sketch constraints accept the sketch's own x / y axes.+- Opening a design reads its metadata and preview through a bounded, seekable reader; the docs+ and web app have link preview cards.-**New file format.** Save and Save As now write `.solidcraft` designs as a zip container-that stores imported STEP, mesh and image data as binary, once each, at full precision, so-designs with imports save and open faster. What that means for you:-- Your existing `.solidcraft` and `.solvecraft` files (plain JSON) still open as before; the- format is detected from the contents.-- Want plain JSON (for diffs or scripts)? Use **File ▸ Save As JSON…**, or pick a- `.json` name in Save As; later saves keep JSON. **File ▸ Export Design as JSON…** writes a- separate JSON copy. From the CLI, `solidcraft-cli run … --save design.json`; from MCP or- scripts, pass `"format": "json"` to `save` / `file.save`.-- SolidCraft 0.5 and older can't open designs saved by 0.6, as a container or as JSON (the- JSON format tag is now `solidcraft/14`). Keep a copy of a file you may still open in 0.5.+**File format.** Designs are now format 15 (`solidcraft/15`). SolidCraft 0.6 and older can't+open designs saved by 0.7, as a container or as JSON; keep a copy of a file you may still open+in 0.6. Files from every earlier version still open in 0.7.-**Renamed to SolidCraft.** Everything now uses the new name: the `solidcraft` and-`solidcraft-cli` programs, `.solidcraft` designs, `SOLIDCRAFT_*` environment variables,-settings folders, package names and the `solidcraft` MCP server. Upgrading from SolveCraft:-- `.solvecraft` designs still open (double-click, Open, drag-drop, the CLI and MCP); new saves- are `.solidcraft`.-- Settings, preferences and recovery files are copied to the new folders on first launch; the- old folders are left in place. `SOLVECRAFT_*` environment variables are still read.-- `solvecraft-cli` remains as a deprecated alias for one release; it forwards to- `solidcraft-cli` and prints a note. Agents: `claude mcp add solidcraft -- solidcraft-cli mcp`;- an existing `claude mcp add solvecraft -- solvecraft-cli mcp` setup keeps working.-- Windows: the `.msi` upgrades the existing installation in place (now in- `Program Files\SolidCraft`). Linux: the `solidcraft` `.deb`/`.rpm` replaces the `solvecraft`- package. The Flatpak app ID stays `ai.storyteller.solvecraft`, so `flatpak update` just works,- and existing AppImages find the update.-- macOS: quit the app, move the old `SolveCraft.app` to the Trash (your designs and settings- stay), then drag `SolidCraft.app` from the DMG onto Applications and pin it in the Dock.-- Details: [compatibility notes](https://github.com/bherbruck/solidcraft/blob/main/docs/compatibility.md).+**Known limitations**+- Some faces still need the fixed-plane fallback for sketches: side faces Join merged from two+ extrudes ([#491](https://github.com/bherbruck/solidcraft/issues/491)), faces split by a later+ feature ([#492](https://github.com/bherbruck/solidcraft/issues/492)), Cut walls and chamfer+ faces ([#493](https://github.com/bherbruck/solidcraft/issues/493)), faces after Revolve,+ Offset Face or Boss ([#494](https://github.com/bherbruck/solidcraft/issues/494)) and sheet+ metal thickness faces ([#495](https://github.com/bherbruck/solidcraft/issues/495)).+- Cutting a coaxial cylinder from a thin disc can lose a little volume+ ([#500](https://github.com/bherbruck/solidcraft/issues/500)); an edge flange with different+ per-edge angles leaves gaps at the corners+ ([#501](https://github.com/bherbruck/solidcraft/issues/501)).+- More in [ROADMAP.md](https://github.com/bherbruck/solidcraft/blob/main/ROADMAP.md#known-limitations).-Documentation, the browser app and the Flatpak feed use the SolidCraft project Pages URLs;-old-name Pages addresses are not permanent aliases.+**Upgrading from 0.5 or earlier.** 0.6 renamed SolveCraft to SolidCraft and made the zip+container the default save format. `.solvecraft` designs, old settings folders and+`SOLVECRAFT_*` variables are still picked up, and `solvecraft-cli` still forwards to+`solidcraft-cli`. Want plain JSON? Use **File ▸ Save As JSON…** or `--save design.json`. On+macOS, replace `SolveCraft.app` with `SolidCraft.app`. Details:+[compatibility notes](https://github.com/bherbruck/solidcraft/blob/main/docs/compatibility.md).++Documentation, the browser app and the Flatpak feed use the SolidCraft project Pages URLs.**Which file?**- **Windows:** `SolidCraft-{version}-windows-x64.exe` runs as is. Or install the `.msi`, or unzip the@@ -89,6 +84,5 @@ The builds aren't signed yet. On macOS, right-click `SolidCraft.app` in Applicat**Open** the first time (or run `xattr -dr com.apple.quarantine /Applications/SolidCraft.app`).On Windows, SmartScreen may say "Windows protected your PC": **More info**, then **Run anyway**.Licences are built in (Help ▸ About ▸ Licences, `solidcraft-cli licences`); the packages also-install `THIRD-PARTY-LICENSES.txt`. Known limitations:-[ROADMAP.md](https://github.com/bherbruck/solidcraft/blob/main/ROADMAP.md#known-limitations).+install `THIRD-PARTY-LICENSES.txt`.diff --git a/Cargo.lock b/Cargo.lockindex cda30d1f0d..7bb68c4a4f 100644--- a/Cargo.lock+++ b/Cargo.lock@@ -3290,7 +3290,7 @@ dependencies = [[[package]]name = "solidcraft"-version = "0.6.0"+version = "0.7.0"dependencies = ["eframe","egui",@@ -3307,7 +3307,7 @@ dependencies = [[[package]]name = "solidcraft-cli"-version = "0.6.0"+version = "0.7.0"dependencies = ["serde_json","solidcraft-engine",@@ -3316,7 +3316,7 @@ dependencies = [[[package]]name = "solidcraft-doc"-version = "0.6.0"+version = "0.7.0"dependencies = ["log","serde",@@ -3331,7 +3331,7 @@ dependencies = [[[package]]name = "solidcraft-engine"-version = "0.6.0"+version = "0.7.0"dependencies = ["log","serde",@@ -3347,7 +3347,7 @@ dependencies = [[[package]]name = "solidcraft-geom"-version = "0.6.0"+version = "0.7.0"dependencies = ["serde","serde_json",@@ -3356,7 +3356,7 @@ dependencies = [[[package]]name = "solidcraft-io"-version = "0.6.0"+version = "0.7.0"dependencies = ["quick-xml 0.38.4","serde",@@ -3371,7 +3371,7 @@ dependencies = [[[package]]name = "solidcraft-kernel"-version = "0.6.0"+version = "0.7.0"dependencies = ["log","serde",@@ -3386,7 +3386,7 @@ dependencies = [[[package]]name = "solidcraft-mcp"-version = "0.6.0"+version = "0.7.0"dependencies = ["serde_json","solidcraft-engine",@@ -3394,7 +3394,7 @@ dependencies = [[[package]]name = "solidcraft-render"-version = "0.6.0"+version = "0.7.0"dependencies = ["image","serde",@@ -3404,7 +3404,7 @@ dependencies = [[[package]]name = "solidcraft-sketch"-version = "0.6.0"+version = "0.7.0"dependencies = ["serde","serde_json",@@ -3415,7 +3415,7 @@ dependencies = [[[package]]name = "solidcraft-ui-egui"-version = "0.6.0"+version = "0.7.0"dependencies = ["egui","egui-wgpu",@@ -3430,7 +3430,7 @@ dependencies = [[[package]]name = "solidcraft-web"-version = "0.6.0"+version = "0.7.0"dependencies = ["eframe","egui",@@ -4853,7 +4853,7 @@ checksum = "e450f9b2ed1dff33c94c12589a87338689467b9c4f5d8a5710bd09a847d2c8a7"[[package]]name = "xtask"-version = "0.6.0"+version = "0.7.0"dependencies = ["serde_json",]diff --git a/Cargo.toml b/Cargo.tomlindex 5dbe1915fc..41f7c72d95 100644--- a/Cargo.toml+++ b/Cargo.toml@@ -5,7 +5,7 @@ members = ["crates/*", "apps/*", "xtask"]exclude = ["vendor"][workspace.package]-version = "0.6.0"+version = "0.7.0"edition = "2024"license = "MIT OR Apache-2.0"rust-version = "1.95"