Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 62/509: kernel-cases: sweeps revolve cases from #450-#2947 (faces, axis, cuts, seams)

Brennen Herbruckaa3ca73268c0
diff --git a/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/expected.json b/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/expected.json
new file mode 100644
index 0000000000..1b1adf0b34
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1853",
+ "tangency-labs/solidcraft#1866"
+ ],
+ "what": "half a slot (r 3, centres 14 apart) revolved a full turn about its own centreline, which lies in the top face of a plate, as a cut (no result after about 10 s of retries)",
+ "source": "analytic",
+ "method": "the half slot revolved 360 degrees is a capsule: cylinder r 3, length 14 plus two hemispheres: V = pi 9 14 + 4/3 pi 27 = 508.94. Its axis lies in the plate top face z = 10, so exactly half of it is inside the 40 x 20 x 10 plate: V = 8000 - 508.94 / 2 = 7745.53. Faces: 5 plate faces + top face with the slot outline + half cylinder + 2 quarter spheres = 9.",
+ "body_count": 1,
+ "volume_mm3": 7745.530995059226,
+ "faces": 9
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/recipe.json b/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/recipe.json
new file mode 100644
index 0000000000..abedc1bd0e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1853-revolve-cut-half-a-slot-about-its-centreline/recipe.json
@@ -0,0 +1,119 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 20,
+ "height": 10,
+ "corner": [
+ -20,
+ -10,
+ 0
+ ],
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 10.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Slot"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -7,
+ 3
+ ],
+ [
+ 7,
+ 3
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ 7,
+ 0
+ ],
+ "start": [
+ 10,
+ 0
+ ],
+ "end": [
+ 7,
+ 3
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ -7,
+ 0
+ ],
+ "start": [
+ -7,
+ 3
+ ],
+ "end": [
+ -10,
+ 0
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -10,
+ 0
+ ],
+ [
+ 10,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "x",
+ "angle": "360 deg",
+ "operation": "cut"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/expected.json b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/expected.json
new file mode 100644
index 0000000000..6153daf9c6
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1866"
+ ],
+ "what": "half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 180 deg about its centreline",
+ "source": "analytic",
+ "method": "the profile lies on one side of the axis, so a turn of theta gives theta / 2 pi of the capsule (cylinder r 3, length 14 plus two hemispheres, 508.94): V = 1/2 of it; faces: the cylinder part, two spherical parts and one flat face = 4 (the two end faces of a half turn lie in the one plane through the axis and form a single stadium-shaped face).",
+ "body_count": 1,
+ "volume_mm3": 254.46900494077323,
+ "faces": 4
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/recipe.json b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/recipe.json
new file mode 100644
index 0000000000..4da79b3de8
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-180/recipe.json
@@ -0,0 +1,105 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Slot"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -7,
+ 3
+ ],
+ [
+ 7,
+ 3
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ 7,
+ 0
+ ],
+ "start": [
+ 10,
+ 0
+ ],
+ "end": [
+ 7,
+ 3
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ -7,
+ 0
+ ],
+ "start": [
+ -7,
+ 3
+ ],
+ "end": [
+ -10,
+ 0
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -10,
+ 0
+ ],
+ [
+ 10,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "x",
+ "angle": "180 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/expected.json b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/expected.json
new file mode 100644
index 0000000000..74306dead8
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#1866"
+ ],
+ "what": "half a slot (r 3, centres 14 apart; the segment before the axis edge comes back to the axis along an arc) revolved 90 deg about its centreline",
+ "source": "analytic",
+ "method": "the profile lies on one side of the axis, so a turn of theta gives theta / 2 pi of the capsule (cylinder r 3, length 14 plus two hemispheres, 508.94): V = 1/4 of it; faces: the cylinder part, two spherical parts and the two planar end faces = 5.",
+ "body_count": 1,
+ "volume_mm3": 127.23450247038662,
+ "faces": 5
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/recipe.json b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/recipe.json
new file mode 100644
index 0000000000..1aba574be3
--- /dev/null
+++ b/tests/kernel-cases/sweeps/1866-revolve-half-slot-profile-90/recipe.json
@@ -0,0 +1,105 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Slot"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -7,
+ 3
+ ],
+ [
+ 7,
+ 3
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ 7,
+ 0
+ ],
+ "start": [
+ 10,
+ 0
+ ],
+ "end": [
+ 7,
+ 3
+ ]
+ }
+ },
+ {
+ "command": "sketch.arc.center_point",
+ "params": {
+ "center": [
+ -7,
+ 0
+ ],
+ "start": [
+ -7,
+ 3
+ ],
+ "end": [
+ -10,
+ 0
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -10,
+ 0
+ ],
+ [
+ 10,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "x",
+ "angle": "90 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/expected.json b/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/expected.json
new file mode 100644
index 0000000000..84c45c1373
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2295"
+ ],
+ "what": "a torus (R 10, r 5) cut by a disc of radius 5 centred at (15,0) in the XZ plane revolved about Z (the disc overlaps the torus tube)",
+ "source": "analytic",
+ "method": "both are coaxial rings, so the cut removes the revolution of the lens where the two circles (centres 10 and 15, r 5) overlap. Lens area = 2 r^2 acos(d/2r) - d/2 sqrt(4r^2 - d^2) = 30.709, centroid x = 12.5 by symmetry. V = 2 pi^2 10 25 - 2 pi 12.5 A_lens = 2522.9. Area (Pappus for curves): arc of the tube circle outside the disc (240 degrees, centroid x 10 - 5 sin(120)/(2 pi/3)) and arc of the disc circle inside the tube (120 degrees, centroid x 15 - 5 sin(60)/(pi/3)), each turned 2 pi about Z. Two toroidal faces.",
+ "body_count": 1,
+ "volume_mm3": 2522.903937393692,
+ "area_mm2": 1758.767884317251,
+ "faces": 2
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/recipe.json b/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/recipe.json
new file mode 100644
index 0000000000..8b9549b26e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2295-revolve-cut-torus-by-an-overlapping-ring/recipe.json
@@ -0,0 +1,57 @@
+{
+ "commands": [
+ {
+ "command": "solid.torus",
+ "params": {
+ "major": 10,
+ "minor": 5,
+ "body_name": "Torus"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Tool"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 15,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "Z",
+ "angle": "360 deg",
+ "operation": "cut"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/expected.json b/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/expected.json
new file mode 100644
index 0000000000..e774d912f7
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2947",
+ "tangency-labs/solidcraft#2948"
+ ],
+ "what": "a rectangle section revolved 300 degrees about Z, then intersected with a plate (slab |y| <= 5) crossing the ring at the start/end gap side and the far side (boolean gave up: \"loop not inside any face piece\")",
+ "source": "analytic",
+ "method": "the ring section r 20..30, z 0..10 turns from +x counter-clockwise through 300 degrees (the gap is -60..0 degrees). The slab |y| <= 5 meets +x (only y >= 0 is covered) and -x (fully covered). Area of annulus part with |y| <= 5, x > 0: F(R) = a sqrt(R^2 - a^2) + R^2 asin(a/R); V = 10 [ (F(30) - F(20)) / 2 + (F(30) - F(20)) ]. The two crossings are disjoint, so two bodies.",
+ "body_count": 2,
+ "volume_mm3": 1510.6287024479082
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/recipe.json b/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/recipe.json
new file mode 100644
index 0000000000..6833138cbd
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2947-revolve-300-degrees-intersected-by-a-plate/recipe.json
@@ -0,0 +1,77 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Sec"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 20,
+ 0
+ ],
+ "p1": [
+ 30,
+ 10
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "Z",
+ "angle": "300 deg",
+ "operation": "new",
+ "body_name": "Ring"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 100,
+ "width": 10,
+ "height": 12,
+ "corner": [
+ -50,
+ -5,
+ -1
+ ],
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.combine",
+ "params": {
+ "target": "Ring",
+ "tools": [
+ "Plate"
+ ],
+ "operation": "intersect"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/expected.json b/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/expected.json
new file mode 100644
index 0000000000..54408ad818
--- /dev/null
+++ b/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/expected.json
@@ -0,0 +1,25 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#450",
+ "tangency-labs/solidcraft#452"
+ ],
+ "what": "a half ring between two arcs (both radial lines on the axis) revolved a full turn from a sketch plane 10 mm above the origin (volume +34 %)",
+ "source": "analytic",
+ "method": "the revolve is a hollow ball of radii 40 and 18.5 centred at (0,0,10): V = 4/3 pi (40^3 - 18.5^3), A = 4 pi (40^2 + 18.5^2); two spherical faces, one body with an inner shell.",
+ "body_count": 1,
+ "volume_mm3": 241560.72432594837,
+ "area_mm2": 24407.033325739103,
+ "faces": 2,
+ "bbox": {
+ "min": [
+ -40,
+ -40,
+ -30
+ ],
+ "max": [
+ 40,
+ 40,
+ 50
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/recipe.json b/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/recipe.json
new file mode 100644
index 0000000000..0c33bdc0cc
--- /dev/null
+++ b/tests/kernel-cases/sweeps/450-revolve-spherical-shell-sketched-off-the-origin/recipe.json
@@ -0,0 +1,105 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 10.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Shell"
+ }
+ },
+ {
+ "command": "sketch.arc.three_point",
+ "params": {
+ "start": [
+ 0,
+ -40
+ ],
+ "through": [
+ 40,
+ 0
+ ],
+ "end": [
+ 0,
+ 40
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 40
+ ],
+ [
+ 0,
+ 18.5
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.arc.three_point",
+ "params": {
+ "start": [
+ 0,
+ 18.5
+ ],
+ "through": [
+ 18.5,
+ 0
+ ],
+ "end": [
+ 0,
+ -18.5
+ ]
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ -18.5
+ ],
+ [
+ 0,
+ -40
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "y",
+ "angle": "360 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/expected.json b/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/expected.json
new file mode 100644
index 0000000000..1c6b3d4c56
--- /dev/null
+++ b/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#487",
+ "tangency-labs/solidcraft#490"
+ ],
+ "what": "a disc cut by the body made from two adjacent profiles revolved on the axis, around the disc flat end",
+ "source": "analytic",
+ "method": "Hand = cylinder r 20 from x = 0 to 60; Holder = disc r 40 from x = -1 to 1; keep_tools keeps Hand. Cut removes r < 20, x in [0,1] from the disc: V(Holder) = pi 40^2 2 - pi 20^2 1. Both bodies exist at the end: Holder 8796.46 and Hand 75398.22; the totals below add them.",
+ "body_count": 2,
+ "volume_mm3": 84194.68311620646
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/recipe.json b/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/recipe.json
new file mode 100644
index 0000000000..0a77dff56b
--- /dev/null
+++ b/tests/kernel-cases/sweeps/487-cut-disc-by-revolved-adjacent-profiles/recipe.json
@@ -0,0 +1,152 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 60,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 20
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 20
+ ],
+ [
+ 60,
+ 20
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 30,
+ 20
+ ],
+ [
+ 30,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 60,
+ 20
+ ],
+ [
+ 60,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "sketch": "P",
+ "profiles": [
+ 0,
+ 1
+ ],
+ "axis": "X",
+ "body_name": "Hand"
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 40,
+ "height": 2,
+ "base": [
+ -1,
+ 0,
+ 0
+ ],
+ "axis": [
+ 1,
+ 0,
+ 0
+ ],
+ "body_name": "Holder"
+ }
+ },
+ {
+ "command": "solid.combine",
+ "params": {
+ "target": "Holder",
+ "tools": [
+ "Hand"
+ ],
+ "operation": "cut",
+ "keep_tools": true
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/expected.json b/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/expected.json
new file mode 100644
index 0000000000..ee22b079c2
--- /dev/null
+++ b/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#487",
+ "tangency-labs/solidcraft#490"
+ ],
+ "what": "two rectangles sharing an edge, both resting on the axis, revolved together (zero-area faces along the axis)",
+ "source": "analytic",
+ "method": "the two 30 x 20 rectangles merge into one 60 x 20 region on the axis: a cylinder r = 20, length 60: V = pi 20^2 60, A = 2 pi 20 60 + 2 pi 20^2; 3 faces (side and two disks), none of zero area.",
+ "body_count": 1,
+ "volume_mm3": 75398.22368615503,
+ "area_mm2": 10053.096491487338,
+ "faces": 3
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/recipe.json b/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/recipe.json
new file mode 100644
index 0000000000..bc11d12310
--- /dev/null
+++ b/tests/kernel-cases/sweeps/487-revolve-two-adjacent-profiles-on-the-axis/recipe.json
@@ -0,0 +1,123 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 60,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 0
+ ],
+ [
+ 0,
+ 20
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 0,
+ 20
+ ],
+ [
+ 60,
+ 20
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 30,
+ 20
+ ],
+ [
+ 30,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 60,
+ 20
+ ],
+ [
+ 60,
+ 0
+ ]
+ ],
+ "infer": false
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "sketch": "P",
+ "profiles": [
+ 0,
+ 1
+ ],
+ "axis": "X",
+ "body_name": "Hand"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/expected.json b/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/expected.json
new file mode 100644
index 0000000000..ae9e520510
--- /dev/null
+++ b/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/expected.json
@@ -0,0 +1,12 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#726",
+ "tangency-labs/solidcraft#494",
+ "tangency-labs/solidcraft#2114"
+ ],
+ "what": "the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: \"the selected planar face no longer exists\")",
+ "source": "analytic",
+ "method": "hub = revolve of (8,0) (30,0) (30,6) (18,6) (18,22) (8,22) about Z: V = pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16] = 28826.6. Extruding the whole annulus z = 6, r 18..30 outward (upward) 5 mm adds pi (30^2 - 18^2) 5 = 9047.8 (the new ring sits on the flange and touches the hub wall r = 18).",
+ "body_count": 1,
+ "volume_mm3": 37875.04103167855
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/recipe.json b/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/recipe.json
new file mode 100644
index 0000000000..ffb458854f
--- /dev/null
+++ b/tests/kernel-cases/sweeps/494-extrude-the-flange-face-of-a-fresh-revolve/recipe.json
@@ -0,0 +1,85 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 8,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 30,
+ 6
+ ],
+ [
+ 18,
+ 6
+ ],
+ [
+ 18,
+ 22
+ ],
+ [
+ 8,
+ 22
+ ]
+ ],
+ "infer": false,
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "Z",
+ "angle": "360 deg",
+ "operation": "new",
+ "body_name": "Hub"
+ }
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "face": [
+ 12,
+ 20.784609690826528,
+ 6
+ ],
+ "distance": 5,
+ "operation": "join"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/expected.json b/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/expected.json
new file mode 100644
index 0000000000..f68ca1ae5d
--- /dev/null
+++ b/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#726",
+ "tangency-labs/solidcraft#1687"
+ ],
+ "what": "a flanged hub profile (six edges, none on the axis) revolved a full turn: the planar faces must come out whole, not as three patches",
+ "source": "analytic",
+ "method": "profile (8,0) (30,0) (30,6) (18,6) (18,22) (8,22) about the Z axis: V = pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16] = 28826.6; area = side walls 2 pi (30 6 + 18 16 + 8 22) + annuli pi [(30^2-8^2) + (30^2-18^2) + (18^2-8^2)]. Six whole faces: three annuli and three cylinders.",
+ "body_count": 1,
+ "volume_mm3": 28827.254189339943,
+ "area_mm2": 9299.114254625787,
+ "faces": 6
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/recipe.json b/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/recipe.json
new file mode 100644
index 0000000000..4b94e0ad90
--- /dev/null
+++ b/tests/kernel-cases/sweeps/726-revolve-full-turn-planar-faces-whole/recipe.json
@@ -0,0 +1,72 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 8,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 30,
+ 6
+ ],
+ [
+ 18,
+ 6
+ ],
+ [
+ 18,
+ 22
+ ],
+ [
+ 8,
+ 22
+ ]
+ ],
+ "infer": false,
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "Z",
+ "angle": "360 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/expected.json b/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/expected.json
new file mode 100644
index 0000000000..05d7d5a1a8
--- /dev/null
+++ b/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#726",
+ "tangency-labs/solidcraft#1718"
+ ],
+ "what": "the same flanged hub profile revolved 240 degrees: its planar faces (three annular sectors and two end faces) must come out whole",
+ "source": "analytic",
+ "method": "a 240 degree turn is 2/3 of the full body: V = 2/3 * pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16]; area = 2/3 of the full-turn walls and annuli plus two end faces, each the profile (22 x 6 + 10 x 16 = 292 mm2). Eight faces: three annular sectors, three cylinder sectors, two end faces.",
+ "body_count": 1,
+ "volume_mm3": 19218.169459559962,
+ "area_mm2": 6783.409503083858,
+ "faces": 8
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/recipe.json b/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/recipe.json
new file mode 100644
index 0000000000..80add1291e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/726-revolve-partial-turn-planar-faces-whole/recipe.json
@@ -0,0 +1,72 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "P"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 8,
+ 0
+ ],
+ [
+ 30,
+ 0
+ ],
+ [
+ 30,
+ 6
+ ],
+ [
+ 18,
+ 6
+ ],
+ [
+ 18,
+ 22
+ ],
+ [
+ 8,
+ 22
+ ]
+ ],
+ "infer": false,
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.revolve",
+ "params": {
+ "axis": "Z",
+ "angle": "240 deg",
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file