Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Acceptance project (#27): examples/acceptance/sensor_enclosure.json, a sensor enclosure sized from user parameters (case with USB cut-out, patterned PCB standoffs and lid bosses, snap fit; lid with a lip from offsets of the case's rim and patterned screw holes). Scenario acceptance_sensor_enclosure edits it (USB moved, suppress and back, save and reopen, STEP out and back in); pending scenarios for what fails: #40 (lid lip after a resize), #41 (snap fit after a resize), #42 (pattern of a suppressed feature), #29 (Lip on the rounded rim). Harness: a script step runs a command script, $DIR in call parameters is the scenario's folder

bherbruckabb9d7460f9a
diff --git a/crates/ui-egui/src/scenario.rs b/crates/ui-egui/src/scenario.rs
index 17ee4a99bf..47e262ccd4 100644
--- a/crates/ui-egui/src/scenario.rs
+++ b/crates/ui-egui/src/scenario.rs
@@ -27,6 +27,8 @@
//! `{"dimension": "d1"}` or `{"handle": "arrow"}` (a manipulator handle: see [`publish_handle`])
//! - `{"autosave": true}`: autosave into the scenario's recovery folder; `{"restart": "crash" |
//! "close"}`: the app dies (or closes) and a new one starts on the same folders
+//! - `{"script": "examples/…/x.json"}`: run a command script through the engine; `"$DIR"` in a
+//! `call` step's string parameters is the scenario's folder
//! - `{"note": "…"}`: a comment; `{"pending": "why"}`: the scenario waits for a fix (its test
//! is ignored)
//! - `{"expect": {…}}`: checks, see [`check`]; `{"until": {…}}` waits (frames) until they pass
@@ -95,6 +97,16 @@ pub fn clear_handles() {
COUNTS.with(|h| h.borrow_mut().clear());
}
+/// `v` with "$DIR" in its strings replaced by `dir`.
+fn with_dir(v: Value, dir: &str) -> Value {
+ match v {
+ Value::String(t) => Value::String(t.replace("$DIR", dir)),
+ Value::Array(a) => Value::Array(a.into_iter().map(|x| with_dir(x, dir)).collect()),
+ Value::Object(o) => Value::Object(o.into_iter().map(|(k, x)| (k, with_dir(x, dir))).collect()),
+ other => other,
+ }
+}
+
/// A fresh folder for one scenario's files.
fn scratch_dir() -> PathBuf {
use std::sync::atomic::{AtomicUsize, Ordering};
@@ -363,8 +375,24 @@ impl Harness {
return Err(format!("{m} was answered after {frames} frames: the agent cursor did not act it out ({min})"));
}
v
+ } else if let Some(f) = s.get("script").and_then(Value::as_str) {
+ // A command script (`{"commands": [{command, params}]}`, path from the repository
+ // root) run through the engine, as `solvecraft-cli run` does.
+ let path = std::path::Path::new(env!("CARGO_MANIFEST_DIR")).join("../..").join(f);
+ let text = std::fs::read_to_string(&path).map_err(|e| format!("{f}: {e}"))?;
+ let v: Value = serde_json::from_str(&text).map_err(|e| format!("{f}: {e}"))?;
+ for (i, c) in v["commands"].as_array().into_iter().flatten().enumerate() {
+ let r = self.call("engine.execute", json!({"command": c["command"], "params": c.get("params").cloned().unwrap_or(json!({}))}));
+ if r["ok"] != true {
+ return Err(format!("{f}: step {} ({}): {}", i + 1, c["command"], r["error"]));
+ }
+ }
+ self.frames(2);
+ return Ok(());
} else if let Some(m) = s.get("call").and_then(Value::as_str) {
- self.call(m, s.get("params").cloned().unwrap_or(json!({})))
+ // "$DIR" in a string parameter is the scenario's folder.
+ let params = with_dir(s.get("params").cloned().unwrap_or(json!({})), &self.dir.to_string_lossy());
+ self.call(m, params)
} else if s.get("note").is_some() || s.get("pending").is_some() {
return Ok(());
} else if let Some(name) = s.get("shot").and_then(Value::as_str) {
diff --git a/crates/ui-egui/tests/scenarios/acceptance_lid_lip_after_resize.json b/crates/ui-egui/tests/scenarios/acceptance_lid_lip_after_resize.json
new file mode 100644
index 0000000000..0da30c426f
--- /dev/null
+++ b/crates/ui-egui/tests/scenarios/acceptance_lid_lip_after_resize.json
@@ -0,0 +1,27 @@
+[
+ {
+ "pending": "#40: offsets of projected geometry get new ids on recompute, the lid's lip fails"
+ },
+ {
+ "note": "Acceptance (#27): the board grows 60 \u2192 70 mm; the lid's lip (offsets of the case's projected rim) follows."
+ },
+ {
+ "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "parameters.change",
+ "params": {
+ "name": "board_w",
+ "expression": "70 mm"
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "bodies": 2
+ }
+ }
+]
diff --git a/crates/ui-egui/tests/scenarios/acceptance_lip_on_rounded_rim.json b/crates/ui-egui/tests/scenarios/acceptance_lip_on_rounded_rim.json
new file mode 100644
index 0000000000..c209816809
--- /dev/null
+++ b/crates/ui-egui/tests/scenarios/acceptance_lip_on_rounded_rim.json
@@ -0,0 +1,33 @@
+[
+ {
+ "pending": "#29: Plastic Lip fails on a rounded (filleted) shelled rim"
+ },
+ {
+ "note": "Acceptance (#27): a lip on the case's rounded rim with the Lip command."
+ },
+ {
+ "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "plastic.lip",
+ "params": {
+ "face": [
+ 0,
+ 29,
+ 25
+ ],
+ "width": 1,
+ "height": 1.5,
+ "body": "Case"
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "bodies": 2
+ }
+ }
+]
diff --git a/crates/ui-egui/tests/scenarios/acceptance_pattern_of_suppressed_feature.json b/crates/ui-egui/tests/scenarios/acceptance_pattern_of_suppressed_feature.json
new file mode 100644
index 0000000000..898c0d0b37
--- /dev/null
+++ b/crates/ui-egui/tests/scenarios/acceptance_pattern_of_suppressed_feature.json
@@ -0,0 +1,29 @@
+[
+ {
+ "pending": "#42: suppressing a patterned feature keeps the pattern's copies"
+ },
+ {
+ "note": "Acceptance (#27): suppressing the PCB standoff takes the patterned copies with it."
+ },
+ {
+ "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "timeline.suppress",
+ "params": {
+ "feature": "Standoff",
+ "suppressed": true
+ }
+ }
+ },
+ {
+ "expect": {
+ "body_volume": {
+ "body": "Case",
+ "volume": 24934.4
+ }
+ }
+ }
+]
diff --git a/crates/ui-egui/tests/scenarios/acceptance_sensor_enclosure.json b/crates/ui-egui/tests/scenarios/acceptance_sensor_enclosure.json
new file mode 100644
index 0000000000..30f04daac1
--- /dev/null
+++ b/crates/ui-egui/tests/scenarios/acceptance_sensor_enclosure.json
@@ -0,0 +1,145 @@
+[
+ {
+ "note": "Acceptance (#27): the sensor enclosure built from examples/acceptance/sensor_enclosure.json, then edited: the USB cut-out moved, the height changed, features suppressed and back, saved and reopened, exported to STEP and read back."
+ },
+ {
+ "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+ "call": "ui.view",
+ "params": {
+ "view": "home"
+ }
+ },
+ {
+ "expect": {
+ "bodies": 2,
+ "errors": 0,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25401.7
+ }
+ }
+ },
+ {
+ "expect": {
+ "body_volume": {
+ "body": "Lid",
+ "volume": 19629.7
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "parameters.change",
+ "params": {
+ "name": "usb_offset",
+ "expression": "15 mm"
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "bodies": 2,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25401.7
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "timeline.suppress",
+ "params": {
+ "feature": "SnapFit1",
+ "suppressed": true
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25340.5
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "timeline.suppress",
+ "params": {
+ "feature": "SnapFit1",
+ "suppressed": false
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25401.7
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "file.save_as",
+ "params": {
+ "path": "$DIR/enclosure.solvecraft"
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "doc.open",
+ "params": {
+ "path": "$DIR/enclosure.solvecraft"
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "bodies": 2,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25401.7
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "file.export",
+ "params": {
+ "path": "$DIR/enclosure.step"
+ }
+ }
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "doc.open",
+ "params": {
+ "path": "$DIR/enclosure.step"
+ }
+ }
+ },
+ {
+ "expect": {
+ "bodies": 2,
+ "body_volume": {
+ "body": "Case",
+ "volume": 25401.7
+ }
+ }
+ }
+]
diff --git a/crates/ui-egui/tests/scenarios/acceptance_snap_fit_after_resize.json b/crates/ui-egui/tests/scenarios/acceptance_snap_fit_after_resize.json
new file mode 100644
index 0000000000..d2d51a4228
--- /dev/null
+++ b/crates/ui-egui/tests/scenarios/acceptance_snap_fit_after_resize.json
@@ -0,0 +1,44 @@
+[
+ {
+ "pending": "#41: a snap fit stays at its old point when its wall moves (a floating body)"
+ },
+ {
+ "note": "Acceptance (#27): the board grows 40 \u2192 50 mm deep; the snap fit stays on the moved front wall."
+ },
+ {
+ "script": "examples/acceptance/sensor_enclosure.json"
+ },
+ {
+ "call": "engine.execute",
+ "params": {
+ "command": "parameters.change",
+ "params": {
+ "name": "board_d",
+ "expression": "50 mm"
+ }
+ }
+ },
+ {
+ "expect": {
+ "errors": 0,
+ "bodies": 2
+ }
+ },
+ {
+ "expect": {
+ "bbox": {
+ "body": "Case",
+ "min": [
+ -40,
+ -35,
+ 0
+ ],
+ "max": [
+ 40,
+ 35,
+ 25
+ ]
+ }
+ }
+ }
+]
diff --git a/examples/acceptance/sensor_enclosure.json b/examples/acceptance/sensor_enclosure.json
new file mode 100644
index 0000000000..12cef4ed51
--- /dev/null
+++ b/examples/acceptance/sensor_enclosure.json
@@ -0,0 +1,772 @@
+{
+ "description": "Acceptance project (#27): a sensor enclosure for a 60 x 40 mm board. A case (rounded, shelled, a USB cut-out on the front wall, 4 PCB standoffs and 4 lid bosses patterned from one each, a snap fit) and a lid (a lip made from offsets of the case's inner rim, 4 screw holes patterned from one). Everything is sized from the user parameters: board_w, board_d, gap (board to inner wall), wall, height, standoff_h, hole_inset, usb_offset, lid_h.",
+ "commands": [
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "board_w",
+ "expression": "60 mm",
+ "comment": "PCB length"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "board_d",
+ "expression": "40 mm",
+ "comment": "PCB width"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "gap",
+ "expression": "8 mm",
+ "comment": "PCB to inner wall"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "wall",
+ "expression": "2 mm"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "height",
+ "expression": "25 mm"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "standoff_h",
+ "expression": "5 mm"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "hole_inset",
+ "expression": "3.5 mm",
+ "comment": "PCB mounting hole from its edge"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "usb_offset",
+ "expression": "10 mm",
+ "comment": "USB connector centre, left of the middle"
+ }
+ },
+ {
+ "command": "parameters.change",
+ "params": {
+ "name": "lid_h",
+ "expression": "4 mm"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "name": "Outline"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 40,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.constraint.coincident",
+ "params": {
+ "a": "p5",
+ "b": "origin"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l1"
+ ],
+ "value": "board_w + 2 * (gap + wall)"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l2"
+ ],
+ "value": "board_d + 2 * (gap + wall)"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": "height",
+ "body_name": "Case"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 40,
+ 30,
+ 12.5
+ ],
+ [
+ -40,
+ 30,
+ 12.5
+ ],
+ [
+ -40,
+ -30,
+ 12.5
+ ],
+ [
+ 40,
+ -30,
+ 12.5
+ ]
+ ],
+ "radius": 4
+ }
+ },
+ {
+ "command": "solid.shell",
+ "params": {
+ "faces": [
+ [
+ 0,
+ 0,
+ 25
+ ]
+ ],
+ "thickness": "wall"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 5,
+ -7,
+ 2
+ ]
+ },
+ "name": "PCB standoff"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ -26.5,
+ -16.5
+ ],
+ "diameter": 6,
+ "id": "so"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": "so.center",
+ "diameter": 2.5,
+ "id": "so_hole"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "so.center"
+ ],
+ "type": "horizontal",
+ "value": "board_w / 2 - hole_inset"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "so.center"
+ ],
+ "type": "vertical",
+ "value": "board_d / 2 - hole_inset"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "so"
+ ],
+ "type": "diameter",
+ "value": "6 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "so_hole"
+ ],
+ "type": "diameter",
+ "value": "2.5 mm"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "profiles": [
+ [
+ "so"
+ ]
+ ],
+ "distance": "standoff_h",
+ "operation": "join",
+ "name": "Standoff"
+ }
+ },
+ {
+ "command": "solid.pattern.rectangular",
+ "params": {
+ "features": [
+ "Standoff"
+ ],
+ "dir1": [
+ 1,
+ 0,
+ 0
+ ],
+ "count1": 2,
+ "spacing1": "board_w - 2 * hole_inset",
+ "dir2": [
+ 0,
+ 1,
+ 0
+ ],
+ "count2": 2,
+ "spacing2": "board_d - 2 * hole_inset"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 0,
+ -30,
+ 12
+ ]
+ },
+ "name": "USB"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ -10,
+ 12
+ ],
+ "corner": [
+ -5.5,
+ 13.75
+ ]
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l5"
+ ],
+ "value": "9 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l6"
+ ],
+ "value": "3.5 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "p9"
+ ],
+ "type": "horizontal",
+ "value": "usb_offset"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "p9"
+ ],
+ "type": "vertical",
+ "value": "wall + standoff_h + 1.6 mm + 1.75 mm"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "profiles": [
+ [
+ "l5",
+ "l6",
+ "l7",
+ "l8"
+ ]
+ ],
+ "distance": "-(wall + 1 mm)",
+ "operation": "cut",
+ "name": "USB cut"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 5,
+ -7,
+ 2
+ ]
+ },
+ "name": "Lid boss"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ -34.5,
+ -24.5
+ ],
+ "diameter": 7,
+ "id": "bs"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": "bs.center",
+ "diameter": 2.5,
+ "id": "bs_hole"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "bs.center"
+ ],
+ "type": "horizontal",
+ "value": "board_w / 2 + gap - 4.5 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "bs.center"
+ ],
+ "type": "vertical",
+ "value": "board_d / 2 + gap - 4.5 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "bs"
+ ],
+ "type": "diameter",
+ "value": "7 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "bs_hole"
+ ],
+ "type": "diameter",
+ "value": "2.5 mm"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "profiles": [
+ [
+ "bs"
+ ]
+ ],
+ "distance": "height - wall",
+ "operation": "join",
+ "name": "Lid boss"
+ }
+ },
+ {
+ "command": "solid.pattern.rectangular",
+ "params": {
+ "features": [
+ "Lid boss"
+ ],
+ "dir1": [
+ 1,
+ 0,
+ 0
+ ],
+ "count1": 2,
+ "spacing1": "board_w + 2 * gap - 9 mm",
+ "dir2": [
+ 0,
+ 1,
+ 0
+ ],
+ "count2": 2,
+ "spacing2": "board_d + 2 * gap - 9 mm"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": "XY",
+ "offset": "height",
+ "name": "Lid outline"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 40,
+ 30
+ ]
+ }
+ },
+ {
+ "command": "sketch.constraint.coincident",
+ "params": {
+ "a": "p5",
+ "b": "origin"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l1"
+ ],
+ "value": "board_w + 2 * (gap + wall)"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "l2"
+ ],
+ "value": "board_d + 2 * (gap + wall)"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": "lid_h",
+ "operation": "new",
+ "body_name": "Lid",
+ "name": "Lid"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 40,
+ 30,
+ 27
+ ],
+ [
+ -40,
+ 30,
+ 27
+ ],
+ [
+ -40,
+ -30,
+ 27
+ ],
+ [
+ 40,
+ -30,
+ 27
+ ]
+ ],
+ "radius": 4,
+ "body": "Lid"
+ }
+ },
+ {
+ "command": "plastic.snap_fit",
+ "params": {
+ "position": [
+ 0,
+ -28,
+ 20
+ ],
+ "hook": [
+ 0,
+ 0,
+ 1
+ ],
+ "length": 8,
+ "thickness": 1.2,
+ "width": 6,
+ "catch_depth": 0.8,
+ "catch_length": 1.5,
+ "body": "Case"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 0,
+ 0,
+ 25
+ ]
+ },
+ "name": "Lid lip"
+ }
+ },
+ {
+ "command": "sketch.project",
+ "params": {
+ "refs": [
+ {
+ "face": [
+ 0,
+ 29,
+ 25
+ ],
+ "body": "Case"
+ }
+ ]
+ }
+ },
+ {
+ "command": "sketch.offset",
+ "params": {
+ "curves": [
+ "l9"
+ ],
+ "distance": 0.2,
+ "side": [
+ 0,
+ 0
+ ]
+ }
+ },
+ {
+ "command": "sketch.offset",
+ "params": {
+ "curves": [
+ "l9"
+ ],
+ "distance": 1.4,
+ "side": [
+ 0,
+ 0
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "sketch": "Lid lip",
+ "profiles": [
+ [
+ "l13",
+ "a13",
+ "l14",
+ "a14",
+ "l15",
+ "a15",
+ "l16",
+ "a16"
+ ]
+ ],
+ "distance": "2 mm",
+ "operation": "join",
+ "targets": [
+ "Lid"
+ ],
+ "name": "Lid lip"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "face": [
+ 5,
+ -7,
+ 29
+ ]
+ },
+ "name": "Lid screw"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ -33.5,
+ -23.5
+ ],
+ "diameter": 3.2,
+ "id": "ls"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "ls.center"
+ ],
+ "type": "horizontal",
+ "value": "board_w / 2 + gap - 4.5 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "origin",
+ "ls.center"
+ ],
+ "type": "vertical",
+ "value": "board_d / 2 + gap - 4.5 mm"
+ }
+ },
+ {
+ "command": "sketch.dimension",
+ "params": {
+ "entities": [
+ "ls"
+ ],
+ "type": "diameter",
+ "value": "3.2 mm"
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "profiles": [
+ [
+ "ls"
+ ]
+ ],
+ "through_all": true,
+ "direction": "negative",
+ "operation": "cut",
+ "targets": [
+ "Lid"
+ ],
+ "name": "Lid screw"
+ }
+ },
+ {
+ "command": "solid.pattern.rectangular",
+ "params": {
+ "features": [
+ "Lid screw"
+ ],
+ "dir1": [
+ 1,
+ 0,
+ 0
+ ],
+ "count1": 2,
+ "spacing1": "board_w + 2 * gap - 9 mm",
+ "dir2": [
+ 0,
+ 1,
+ 0
+ ],
+ "count2": 2,
+ "spacing2": "board_d + 2 * gap - 9 mm"
+ }
+ }
+ ]
+}