SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 58/509: kernel-cases: sweeps lofts from #271-#3412 (zig-zag pairing, ring sections, flush joins and cuts)
Brennen Herbruckb5853aec6ce7
diff --git a/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/expected.json b/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/expected.jsonnew file mode 100644index 0000000000..8d32ef53d9--- /dev/null+++ b/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/expected.json@@ -0,0 +1,15 @@+{+ "sources": [+ "tangency-labs/solidcraft#1184",+ "tangency-labs/solidcraft#1254",+ "tangency-labs/solidcraft#2435",+ "tangency-labs/solidcraft#2447"+ ],+ "what": "a loft between two ring sections (outer r 20, inner r 12) 20 mm apart (the hole was dropped and a solid disc built)",+ "source": "analytic",+ "method": "a tube of outer r 20, inner r 12, length 20: V = pi (20^2 - 12^2) 20, A = 2 pi 20 20 + 2 pi 12 20 + 2 pi (20^2 - 12^2); faces: outer wall, bore, two annular caps.",+ "body_count": 1,+ "volume_mm3": 16084.95438637974,+ "area_mm2": 5629.734035232909,+ "faces": 4+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/recipe.json b/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/recipe.jsonnew file mode 100644index 0000000000..b7eb90c484--- /dev/null+++ b/tests/kernel-cases/sweeps/1184-loft-ring-sections-keep-the-hole/recipe.json@@ -0,0 +1,129 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 12+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 20.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 12+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "A",+ "profiles": [+ {+ "point": [+ 16,+ 0+ ]+ }+ ]+ },+ {+ "sketch": "B",+ "profiles": [+ {+ "point": [+ 16,+ 0+ ]+ }+ ]+ }+ ],+ "operation": "new",+ "body_name": "Ring"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/expected.json b/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/expected.jsonnew file mode 100644index 0000000000..9622a0c656--- /dev/null+++ b/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#1666"+ ],+ "what": "a ruled loft from an 18-vertex zig-zag section to a flat 52 x 3 rectangle with 18 vertices (8 of them collinear), whose twisted ruled faces were exported as crossing triangles",+ "source": "analytic",+ "method": "vertex i of the bottom section is joined to vertex i of the top (same start vertex and winding), so the solid is ruled and every section is the polygon of the interpolated vertices: V = h/6 (A0 + 4 Am + A1), h = 90.5, Am the shoelace area of the averaged polygon.",+ "body_count": 1,+ "volume_mm3": 17993.40548,+ "bbox": {+ "min": [+ -26,+ 0,+ 0+ ],+ "max": [+ 26,+ 14.97217,+ 90.5+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/recipe.json b/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/recipe.jsonnew file mode 100644index 0000000000..95a48885c9--- /dev/null+++ b/tests/kernel-cases/sweeps/1666-loft-zigzag-to-flat-rectangle/recipe.json@@ -0,0 +1,234 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Bottom"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -26,+ 3+ ],+ [+ -24.76384,+ 3+ ],+ [+ -16.0568,+ 14.97217+ ],+ [+ -8,+ 4.90117+ ],+ [+ 0,+ 14.90117+ ],+ [+ 8,+ 4.90117+ ],+ [+ 16.0568,+ 14.97217+ ],+ [+ 24.76384,+ 3+ ],+ [+ 26,+ 3+ ],+ [+ 26,+ 0+ ],+ [+ 23.23616,+ 0+ ],+ [+ 15.9432,+ 10.02783+ ],+ [+ 8,+ 0.09883+ ],+ [+ 0,+ 10.09883+ ],+ [+ -8,+ 0.09883+ ],+ [+ -15.9432,+ 10.02783+ ],+ [+ -23.23616,+ 0+ ],+ [+ -26,+ 0+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 90.5+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Top"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -26,+ 3+ ],+ [+ -24,+ 3+ ],+ [+ -16,+ 3+ ],+ [+ -8,+ 3+ ],+ [+ 0,+ 3+ ],+ [+ 8,+ 3+ ],+ [+ 16,+ 3+ ],+ [+ 24,+ 3+ ],+ [+ 26,+ 3+ ],+ [+ 26,+ 0+ ],+ [+ 24,+ 0+ ],+ [+ 16,+ 0+ ],+ [+ 8,+ 0+ ],+ [+ 0,+ 0+ ],+ [+ -8,+ 0+ ],+ [+ -16,+ 0+ ],+ [+ -24,+ 0+ ],+ [+ -26,+ 0+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Bottom"+ },+ {+ "sketch": "Top"+ }+ ],+ "operation": "new"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/expected.json b/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/expected.jsonnew file mode 100644index 0000000000..9db043d307--- /dev/null+++ b/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#2435",+ "tangency-labs/solidcraft#2447"+ ],+ "what": "a loft between two rectangular ring sections (a rectangle with a rectangular hole), 24 mm apart, tapering outer 40 x 30 to 28 x 20 and hole 20 x 14 to 12 x 6",+ "source": "analytic",+ "method": "outer and hole are ruled frustums of rectangles; the section area is quadratic in height so V = h/6 (A0 + 4 Am + A1) is exact for each: outer 24/6 (1200 + 4 34 25 + 560) = 20640, hole 24/6 (280 + 4 16 10 + 72) = 3968, V = 16672. Faces: 4 outer walls, 4 hole walls, 2 caps = 10.",+ "body_count": 1,+ "volume_mm3": 16672.0,+ "faces": 10+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/recipe.json b/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/recipe.jsonnew file mode 100644index 0000000000..70ee115501--- /dev/null+++ b/tests/kernel-cases/sweeps/2435-loft-rectangular-ring-sections/recipe.json@@ -0,0 +1,141 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 20,+ 15+ ]+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 10,+ 7+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 24.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 14,+ 10+ ]+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 6,+ 3+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "A",+ "profiles": [+ {+ "point": [+ 15,+ 0+ ]+ }+ ]+ },+ {+ "sketch": "B",+ "profiles": [+ {+ "point": [+ 10,+ 0+ ]+ }+ ]+ }+ ],+ "operation": "new",+ "body_name": "RectRing"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/expected.json b/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/expected.jsonnew file mode 100644index 0000000000..2be0485b13--- /dev/null+++ b/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#271",+ "tangency-labs/solidcraft#286",+ "tangency-labs/solidcraft#299"+ ],+ "what": "a loft cut limited by targets to one body while a second body lies inside the loft",+ "source": "analytic",+ "method": "loft of the 20 x 20 square at z = -1 to the 30 x 30 square at z = 25 (side s(z) = 20 + 10 (z+1)/26). Target (40 x 40 x 10) loses the slice z in [0,10]: integral of s^2 dz = (s(10)^3 - s(0)^3)/(3 k), k = 10/26. Bystander (6^3 = 216) is not a target and survives whole: V = 16000 - removed + 216; two bodies.",+ "body_count": 2,+ "volume_mm3": 11227.341222879684+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/recipe.json b/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/recipe.jsonnew file mode 100644index 0000000000..86b4b1bb62--- /dev/null+++ b/tests/kernel-cases/sweeps/271-loft-cut-with-targets-keeps-the-bystander/recipe.json@@ -0,0 +1,129 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 40,+ "height": 10,+ "corner": [+ 0,+ 0,+ 0+ ],+ "body_name": "Target"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 6,+ "width": 6,+ "height": 6,+ "corner": [+ 17,+ 17,+ 12+ ],+ "body_name": "Bystander"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ -1.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "S0"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 10,+ 10+ ],+ "p1": [+ 30,+ 30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 25.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "S1"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 5,+ 5+ ],+ "p1": [+ 35,+ 35+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "S0"+ },+ {+ "sketch": "S1"+ }+ ],+ "operation": "cut",+ "targets": [+ "Target"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/expected.json b/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/expected.jsonnew file mode 100644index 0000000000..5cec9036dd--- /dev/null+++ b/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/expected.json@@ -0,0 +1,23 @@+{+ "sources": [+ "tangency-labs/solidcraft#2847",+ "tangency-labs/solidcraft#3452"+ ],+ "what": "a loft through 19 identical 6 x 4 rectangles on planes turning about the Z axis every 10 degrees from 0 to 180 degrees, centred 30 mm from the axis (volume came out 6 % of the expected at 180 degrees, no error)",+ "source": "analytic",+ "method": "every section is in a half-plane through the Z axis with its centroid at distance 30, so the loft is a bent bar of constant section: Pappus V = A * R * theta = 24 * 30 * pi. bbox: the rectangle reaches radius 33 at 0, 90 and 180 degrees and z = +-2.",+ "body_count": 1,+ "volume_mm3": 2261.946710584651,+ "bbox": {+ "min": [+ -33,+ 0,+ -2+ ],+ "max": [+ 33,+ 33,+ 2+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/recipe.json b/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/recipe.jsonnew file mode 100644index 0000000000..3ae5b84b77--- /dev/null+++ b/tests/kernel-cases/sweeps/2847-loft-rectangles-turning-through-half-a-turn/recipe.json@@ -0,0 +1,829 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1.0,+ 0.0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S0"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.984807753012208,+ 0.17364817766693033,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S1"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.9396926207859084,+ 0.3420201433256687,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S2"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.8660254037844387,+ 0.49999999999999994,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S3"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.766044443118978,+ 0.6427876096865393,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S4"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.6427876096865394,+ 0.766044443118978,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S5"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.5000000000000001,+ 0.8660254037844386,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S6"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.3420201433256688,+ 0.9396926207859083,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S7"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0.17364817766693041,+ 0.984807753012208,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S8"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 6.123233995736766e-17,+ 1.0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S9"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.1736481776669303,+ 0.984807753012208,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S10"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.3420201433256687,+ 0.9396926207859084,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S11"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.4999999999999998,+ 0.8660254037844387,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S12"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.6427876096865394,+ 0.766044443118978,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S13"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.7660444431189779,+ 0.6427876096865395,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S14"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.8660254037844387,+ 0.49999999999999994,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S15"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.9396926207859083,+ 0.3420201433256689,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S16"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -0.984807753012208,+ 0.17364817766693028,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S17"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ -1.0,+ 1.2246467991473532e-16,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "S18"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 27,+ -2+ ],+ "p1": [+ 33,+ 2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "S0"+ },+ {+ "sketch": "S1"+ },+ {+ "sketch": "S2"+ },+ {+ "sketch": "S3"+ },+ {+ "sketch": "S4"+ },+ {+ "sketch": "S5"+ },+ {+ "sketch": "S6"+ },+ {+ "sketch": "S7"+ },+ {+ "sketch": "S8"+ },+ {+ "sketch": "S9"+ },+ {+ "sketch": "S10"+ },+ {+ "sketch": "S11"+ },+ {+ "sketch": "S12"+ },+ {+ "sketch": "S13"+ },+ {+ "sketch": "S14"+ },+ {+ "sketch": "S15"+ },+ {+ "sketch": "S16"+ },+ {+ "sketch": "S17"+ },+ {+ "sketch": "S18"+ }+ ],+ "operation": "new"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/expected.json b/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/expected.jsonnew file mode 100644index 0000000000..9b55102da3--- /dev/null+++ b/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/expected.json@@ -0,0 +1,21 @@+{+ "sources": [+ "tangency-labs/solidcraft#3111"+ ],+ "what": "a loft from a rectangular ring (two nested rectangles) to a circular ring (two concentric circles) 30 mm above: a hollow transition piece",+ "source": "invariants",+ "method": "no closed form for the ring-to-ring pairing, so only invariants are graded: the loft succeeds as one closed valid solid (outer wall, hole wall and two caps), and since every ruling joins a point of one section to a point of the other, the solid lies in the hull of both sections: bbox x +-20, y +-15 (the 40 x 30 outer rectangle), z 0 to 30.",+ "body_count": 1,+ "bbox": {+ "min": [+ -20,+ -15,+ 0+ ],+ "max": [+ 20,+ 15,+ 30+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/recipe.json b/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/recipe.jsonnew file mode 100644index 0000000000..fecab03746--- /dev/null+++ b/tests/kernel-cases/sweeps/3111-loft-rectangular-ring-to-circular-ring/recipe.json@@ -0,0 +1,135 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 20,+ 15+ ]+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 15,+ 10+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 30.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 12+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 8+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "A",+ "profiles": [+ {+ "point": [+ 17,+ 0+ ]+ }+ ]+ },+ {+ "sketch": "B",+ "profiles": [+ {+ "point": [+ 10,+ 0+ ]+ }+ ]+ }+ ],+ "operation": "new",+ "body_name": "Transition"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/expected.json b/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/expected.jsonnew file mode 100644index 0000000000..ee451e2ece--- /dev/null+++ b/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/expected.json@@ -0,0 +1,9 @@+{+ "sources": [+ "tangency-labs/solidcraft#3412"+ ],+ "what": "a loft through two circles drawn on the same plane (no volume between them; it built a flat zero-volume body and reported success)",+ "source": "invariants",+ "method": "the two sections are coplanar, so no solid exists between them: the right behaviour is a clean refusal with no body left, never a zero-volume body.",+ "outcome": "refused"+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/recipe.json b/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/recipe.jsonnew file mode 100644index 0000000000..da5650c151--- /dev/null+++ b/tests/kernel-cases/sweeps/3412-loft-sections-in-one-plane-refused/recipe.json@@ -0,0 +1,92 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 10+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "A"+ },+ {+ "sketch": "B"+ }+ ],+ "operation": "new"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/expected.json b/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/expected.jsonnew file mode 100644index 0000000000..9064f267be--- /dev/null+++ b/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#396",+ "tangency-labs/solidcraft#577"+ ],+ "what": "a conical loft standing on a box top face, joined to the box (one body reported, two touching shells in the result)",+ "source": "analytic",+ "method": "box 40 x 30 x 20 plus the frustum of height 15 from r 6 to r 4 whose base disc lies wholly inside the box top face: V = 24000 + 15/3 pi (36 + 24 + 16). One closed shell: faces = 6 box (top with a circular hole) + cone + top disc = 8.",+ "body_count": 1,+ "volume_mm3": 25193.805208364123,+ "faces": 8+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/recipe.json b/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/recipe.jsonnew file mode 100644index 0000000000..8e34074596--- /dev/null+++ b/tests/kernel-cases/sweeps/396-loft-join-standing-on-a-box-face/recipe.json@@ -0,0 +1,139 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 20,+ 15+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 20,+ "body_name": "Box"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 20.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "L0"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 6+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 35.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "L1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 4+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "L0"+ },+ {+ "sketch": "L1"+ }+ ],+ "operation": "join"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/expected.json b/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/expected.jsonnew file mode 100644index 0000000000..53709983ab--- /dev/null+++ b/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#443"+ ],+ "what": "a cylinder (r 35, h 10) intersected with a conical loft (r 45 at z = -1 to r 33 at z = 11) that crosses its wall 1 mm below the top face (body came back unchanged)",+ "source": "analytic",+ "method": "the cone radius is 44 - z, so it meets the wall r = 35 at z = 9 and has r = 34 at the top: the result is the cylinder to z = 9 plus a frustum from r 35 to r 34 over 1 mm: V = pi 35^2 9 + pi/3 (35^2 + 35 34 + 34^2); faces: wall, cone, top, bottom.",+ "body_count": 1,+ "volume_mm3": 38375.601461150516,+ "faces": 4+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/recipe.json b/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/recipe.jsonnew file mode 100644index 0000000000..afbb99335d--- /dev/null+++ b/tests/kernel-cases/sweeps/443-loft-intersect-cone-meets-wall-below-top/recipe.json@@ -0,0 +1,136 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Cyl"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 35+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "body_name": "Body"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ -1.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 45+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 11.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 33+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "A"+ },+ {+ "sketch": "B"+ }+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/expected.json b/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/expected.jsonnew file mode 100644index 0000000000..8854d64ba8--- /dev/null+++ b/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#881",+ "tangency-labs/solidcraft#956"+ ],+ "what": "a ruled loft between two 18-vertex zig-zag sections with the same start vertex and winding, whose first-vertex direction is ambiguous from the section centroid",+ "source": "analytic",+ "method": "vertex i of the bottom section is joined to vertex i of the top, so the solid is ruled and the section at height t is the polygon of the interpolated vertices; its area is quadratic in t, so Simpson is exact: V = h/6 (A0 + 4 Am + A1) with h = 90 and Am the shoelace area of the polygon of averaged vertices. Faces: 18 ruled sides + 2 planar caps.",+ "body_count": 1,+ "volume_mm3": 17914.43472,+ "faces": 20,+ "bbox": {+ "min": [+ -26,+ 0,+ 0+ ],+ "max": [+ 26,+ 14.97217,+ 90+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/recipe.json b/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/recipe.jsonnew file mode 100644index 0000000000..7a68e85cd6--- /dev/null+++ b/tests/kernel-cases/sweeps/881-loft-zigzag-pleat-vertex-pairing/recipe.json@@ -0,0 +1,234 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Bottom"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -26,+ 3+ ],+ [+ -24.76384,+ 3+ ],+ [+ -16.0568,+ 14.97217+ ],+ [+ -8,+ 4.90117+ ],+ [+ 0,+ 14.90117+ ],+ [+ 8,+ 4.90117+ ],+ [+ 16.0568,+ 14.97217+ ],+ [+ 24.76384,+ 3+ ],+ [+ 26,+ 3+ ],+ [+ 26,+ 0+ ],+ [+ 23.23616,+ 0+ ],+ [+ 15.9432,+ 10.02783+ ],+ [+ 8,+ 0.09883+ ],+ [+ 0,+ 10.09883+ ],+ [+ -8,+ 0.09883+ ],+ [+ -15.9432,+ 10.02783+ ],+ [+ -23.23616,+ 0+ ],+ [+ -26,+ 0+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 90.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Top"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -26,+ 3+ ],+ [+ -24.02812,+ 3+ ],+ [+ -16,+ 3.30105+ ],+ [+ -8,+ 3.00105+ ],+ [+ 0,+ 3.30105+ ],+ [+ 8,+ 3.00105+ ],+ [+ 16,+ 3.30105+ ],+ [+ 24.02812,+ 3+ ],+ [+ 26,+ 3+ ],+ [+ 26,+ 0+ ],+ [+ 23.97188,+ 0+ ],+ [+ 16,+ 0.29895+ ],+ [+ 8,+ -0.00105+ ],+ [+ 0,+ 0.29895+ ],+ [+ -8,+ -0.00105+ ],+ [+ -16,+ 0.29895+ ],+ [+ -23.97188,+ 0+ ],+ [+ -26,+ 0+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Bottom"+ },+ {+ "sketch": "Top"+ }+ ],+ "operation": "new"+ }+ }+ ]+}\ No newline at end of file