Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 59/509: kernel-cases: sweeps loft cases from #96-#3936 (shallow cuts, cones, comb, rails)

Brennen Herbruckb82fd0b769ae
diff --git a/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/expected.json b/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/expected.json
new file mode 100644
index 0000000000..6a6b12c04d
--- /dev/null
+++ b/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#201",
+ "tangency-labs/solidcraft#3371"
+ ],
+ "what": "a loft from a circle of radius 5 to a circle of radius 10, 20 mm above, guided by one straight rail through (5,0,0) and (10,0,20)",
+ "source": "analytic",
+ "method": "the rail lies on the cone through both circles, so the loft is that cone frustum: V = 20/3 pi (25 + 100 + 50) = 3665.2.",
+ "body_count": 1,
+ "volume_mm3": 3665.191429188092,
+ "faces": 3,
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 20
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/recipe.json b/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/recipe.json
new file mode 100644
index 0000000000..023b7fe609
--- /dev/null
+++ b/tests/kernel-cases/sweeps/201-loft-one-guide-rail-cone-frustum/recipe.json
@@ -0,0 +1,146 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "A"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 5
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 20.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "B"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 0,
+ 1
+ ]
+ },
+ "name": "Rail"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ 5,
+ 0
+ ],
+ [
+ 10,
+ 20
+ ]
+ ],
+ "infer": false,
+ "ids": [
+ "r1"
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "A"
+ },
+ {
+ "sketch": "B"
+ }
+ ],
+ "rails": [
+ {
+ "sketch": "Rail",
+ "curves": [
+ "r1"
+ ]
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/expected.json b/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/expected.json
new file mode 100644
index 0000000000..37ff5b5462
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#2570",
+ "tangency-labs/solidcraft#3670"
+ ],
+ "what": "a loft between a circle and a 20-edge comb outline (not star-shaped from its centroid: the teeth turn the vertex directions back on themselves), 40 mm apart (the circle was wound about ten times, the app froze)",
+ "source": "invariants",
+ "method": "no closed form for the circle-to-comb pairing, so only invariants: the loft builds one closed valid solid, and as every ruling joins a point of the comb to a point of the circle, the solid lies in the hull of both sections: bbox x +-18, y -2..18 (the circle r 10 about (0,8) reaches below the comb), z 0..40.",
+ "body_count": 1,
+ "bbox": {
+ "min": [
+ -18,
+ -2,
+ 0
+ ],
+ "max": [
+ 18,
+ 18,
+ 40
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/recipe.json b/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/recipe.json
new file mode 100644
index 0000000000..072c4dc8aa
--- /dev/null
+++ b/tests/kernel-cases/sweeps/2570-loft-circle-to-a-non-star-shaped-comb/recipe.json
@@ -0,0 +1,171 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Comb"
+ }
+ },
+ {
+ "command": "sketch.line",
+ "params": {
+ "points": [
+ [
+ -18,
+ 0
+ ],
+ [
+ 18,
+ 0
+ ],
+ [
+ 18,
+ 16
+ ],
+ [
+ 14,
+ 16
+ ],
+ [
+ 14,
+ 6
+ ],
+ [
+ 10,
+ 6
+ ],
+ [
+ 10,
+ 16
+ ],
+ [
+ 6,
+ 16
+ ],
+ [
+ 6,
+ 6
+ ],
+ [
+ 2,
+ 6
+ ],
+ [
+ 2,
+ 16
+ ],
+ [
+ -2,
+ 16
+ ],
+ [
+ -2,
+ 6
+ ],
+ [
+ -6,
+ 6
+ ],
+ [
+ -6,
+ 16
+ ],
+ [
+ -10,
+ 16
+ ],
+ [
+ -10,
+ 6
+ ],
+ [
+ -14,
+ 6
+ ],
+ [
+ -14,
+ 16
+ ],
+ [
+ -18,
+ 16
+ ]
+ ],
+ "infer": false,
+ "closed": true
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 40.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Round"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 8
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Comb"
+ },
+ {
+ "sketch": "Round"
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/expected.json b/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/expected.json
new file mode 100644
index 0000000000..9b6ead3ff0
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/expected.json
@@ -0,0 +1,22 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3326",
+ "tangency-labs/solidcraft#3402"
+ ],
+ "what": "a loft from a 20 mm square to a circle of radius 10 offset 20 mm (the loft tool symbol): the loft geometry looked wrong",
+ "source": "invariants",
+ "method": "the square and the circle are inscribed in each other (circle r 10 touches the square sides), and the pairing of corners to circle points is not canonical, so only invariants are graded: one closed valid solid inside the hull of both sections, bbox x, y +-10, z 0..20.",
+ "body_count": 1,
+ "bbox": {
+ "min": [
+ -10,
+ -10,
+ 0
+ ],
+ "max": [
+ 10,
+ 10,
+ 20
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/recipe.json b/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/recipe.json
new file mode 100644
index 0000000000..fb363842e1
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3326-loft-20mm-square-to-a-circle/recipe.json
@@ -0,0 +1,95 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Square"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 10,
+ 10
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 20.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Circle"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Square"
+ },
+ {
+ "sketch": "Circle"
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/expected.json b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/expected.json
new file mode 100644
index 0000000000..f2da24a452
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/expected.json
@@ -0,0 +1,23 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3541"
+ ],
+ "what": "a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane turned over (normal pointing down)): \"a horizontal narrowing is created\" instead of a cone",
+ "source": "analytic",
+ "method": "two coaxial circles lofted ruled give a cone frustum whichever way the section planes face: V = h/3 (A1 + A2 + sqrt(A1 A2)) = 10 pi (400 + 64 + 160) = 19603.5; faces: cone and two caps.",
+ "body_count": 1,
+ "volume_mm3": 19603.538158400308,
+ "faces": 3,
+ "bbox": {
+ "min": [
+ -20,
+ -20,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 30
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/recipe.json b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/recipe.json
new file mode 100644
index 0000000000..4655290f2f
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-flipped-plane/recipe.json
@@ -0,0 +1,92 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Big"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 20
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 30.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ -1,
+ 0
+ ]
+ },
+ "name": "Small"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 8
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Small"
+ },
+ {
+ "sketch": "Big"
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/expected.json b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/expected.json
new file mode 100644
index 0000000000..2b89d02f7e
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/expected.json
@@ -0,0 +1,23 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3541"
+ ],
+ "what": "a loft from a circle of radius 8 to a circle of radius 20, 30 mm below it (sections given small first, the small one drawn on a plane facing the same way): \"a horizontal narrowing is created\" instead of a cone",
+ "source": "analytic",
+ "method": "two coaxial circles lofted ruled give a cone frustum whichever way the section planes face: V = h/3 (A1 + A2 + sqrt(A1 A2)) = 10 pi (400 + 64 + 160) = 19603.5; faces: cone and two caps.",
+ "body_count": 1,
+ "volume_mm3": 19603.538158400308,
+ "faces": 3,
+ "bbox": {
+ "min": [
+ -20,
+ -20,
+ 0
+ ],
+ "max": [
+ 20,
+ 20,
+ 30
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/recipe.json b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/recipe.json
new file mode 100644
index 0000000000..206685aab9
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3541-loft-two-circles-into-a-cone-same-sense/recipe.json
@@ -0,0 +1,92 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Big"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 20
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 30.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Small"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 8
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Small"
+ },
+ {
+ "sketch": "Big"
+ }
+ ],
+ "operation": "new"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/expected.json b/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/expected.json
new file mode 100644
index 0000000000..51c4328dda
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/expected.json
@@ -0,0 +1,21 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#3936"
+ ],
+ "what": "a loft from the circle on top of a cylinder (r 10, height 15) to a 40 x 30 rectangle 30 mm above, joined to the cylinder (builds as a new body in 2 ms, the join never returns)",
+ "source": "invariants",
+ "method": "the loft pairing of circle and rectangle is not canonical, so no volume is graded: the join must give one closed valid solid in the hull of the cylinder and both sections, bbox x +-20, y +-15, z 0..45.",
+ "body_count": 1,
+ "bbox": {
+ "min": [
+ -20,
+ -15,
+ 0
+ ],
+ "max": [
+ 20,
+ 15,
+ 45
+ ]
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/recipe.json b/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/recipe.json
new file mode 100644
index 0000000000..d9cb42f0d8
--- /dev/null
+++ b/tests/kernel-cases/sweeps/3936-loft-join-circle-to-rectangle-on-a-cylinder/recipe.json
@@ -0,0 +1,109 @@
+{
+ "commands": [
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "radius": 10,
+ "height": 15,
+ "base": [
+ 0,
+ 0,
+ 0
+ ],
+ "axis": "Z",
+ "body_name": "Post"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 15.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Bottom"
+ }
+ },
+ {
+ "command": "sketch.circle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "radius": 10
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 45.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Top"
+ }
+ },
+ {
+ "command": "sketch.rectangle.center",
+ "params": {
+ "center": [
+ 0,
+ 0
+ ],
+ "corner": [
+ 20,
+ 15
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Bottom"
+ },
+ {
+ "sketch": "Top"
+ }
+ ],
+ "operation": "join"
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/expected.json b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/expected.json
new file mode 100644
index 0000000000..b2d59f28e2
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#122",
+ "tangency-labs/solidcraft#96"
+ ],
+ "what": "a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given pad first (the cut panicked for one order)",
+ "source": "analytic",
+ "method": "the loft is a ruled prismatoid between the 100 x 60 rectangle at z = 20 and the 10 x 10 square at z = 11 (corner at (2,2)..(12,12)): V = h/6 (A0 + 4 Am + A1) with h = 9, Am = (110/2) (70/2): V_loft = 20700.0. The top section covers the whole cross-section at z = 20, so the 10 mm slab above it is cut loose from the rest: two bodies, together 180000 - V_loft; the result must not depend on the order of the sections.",
+ "body_count": 2,
+ "volume_mm3": 159300.0
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/recipe.json b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/recipe.json
new file mode 100644
index 0000000000..8dd11ee9eb
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-pad-first/recipe.json
@@ -0,0 +1,115 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 100,
+ "width": 60,
+ "height": 30,
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "body_name": "Basin"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 20.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Top"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 100,
+ 60
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 11.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Pad"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 2,
+ 2
+ ],
+ "p1": [
+ 12,
+ 12
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Pad"
+ },
+ {
+ "sketch": "Top"
+ }
+ ],
+ "operation": "cut",
+ "targets": [
+ "Basin"
+ ]
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/expected.json b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/expected.json
new file mode 100644
index 0000000000..d06de6b46a
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/expected.json
@@ -0,0 +1,11 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#122",
+ "tangency-labs/solidcraft#96"
+ ],
+ "what": "a loft cut through a 100 x 60 x 30 block from its whole 100 x 60 outline at z = 20 (edges flush with the side faces) down to a 10 x 10 pad in a corner at z = 11, sections given top first (the cut panicked for one order)",
+ "source": "analytic",
+ "method": "the loft is a ruled prismatoid between the 100 x 60 rectangle at z = 20 and the 10 x 10 square at z = 11 (corner at (2,2)..(12,12)): V = h/6 (A0 + 4 Am + A1) with h = 9, Am = (110/2) (70/2): V_loft = 20700.0. The top section covers the whole cross-section at z = 20, so the 10 mm slab above it is cut loose from the rest: two bodies, together 180000 - V_loft; the result must not depend on the order of the sections.",
+ "body_count": 2,
+ "volume_mm3": 159300.0
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/recipe.json b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/recipe.json
new file mode 100644
index 0000000000..9d633693d1
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-loft-cut-box-sections-top-first/recipe.json
@@ -0,0 +1,115 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 100,
+ "width": 60,
+ "height": 30,
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "body_name": "Basin"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 20.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Top"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 100,
+ 60
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 11.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Pad"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 2,
+ 2
+ ],
+ "p1": [
+ 12,
+ 12
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "Top"
+ },
+ {
+ "sketch": "Pad"
+ }
+ ],
+ "operation": "cut",
+ "targets": [
+ "Basin"
+ ]
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/expected.json b/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/expected.json
new file mode 100644
index 0000000000..7ecce37e74
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/expected.json
@@ -0,0 +1,10 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#96"
+ ],
+ "what": "a loft cut from a 556.68 x 99 rectangle on the top face of a 900 x 480 x 160 slab down 4 mm to an 80 x 80 square (a kernel panic in healing; the sides are about 0.9 degrees from horizontal)",
+ "source": "analytic",
+ "method": "a ruled loft of two rectangles: V = h/6 (A0 + 4 Am + A1) with h = 4, A0 = 556.68 * 99, A1 = 80 * 80, Am = 318.34 * 89.5 = 116984.69 removed from the slab 900 * 480 * 160 = 69120000.",
+ "body_count": 1,
+ "volume_mm3": 69003015.30666667
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/recipe.json b/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/recipe.json
new file mode 100644
index 0000000000..eccc24ca3a
--- /dev/null
+++ b/tests/kernel-cases/sweeps/96-shallow-loft-cut-starting-in-the-top-face/recipe.json
@@ -0,0 +1,146 @@
+{
+ "commands": [
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 0.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "Base"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 0,
+ 0
+ ],
+ "p1": [
+ 900,
+ 480
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.extrude",
+ "params": {
+ "distance": 160,
+ "name": "Slab"
+ }
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 160.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "LoftTop"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 171.66,
+ 329.34
+ ],
+ "p1": [
+ 728.34,
+ 428.34
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "sketch.create",
+ "params": {
+ "plane": {
+ "origin": [
+ 0.0,
+ 0.0,
+ 156.0
+ ],
+ "x_dir": [
+ 1,
+ 0,
+ 0
+ ],
+ "y_dir": [
+ 0,
+ 1,
+ 0
+ ]
+ },
+ "name": "LoftBottom"
+ }
+ },
+ {
+ "command": "sketch.rectangle.two_point",
+ "params": {
+ "p0": [
+ 410,
+ 338.84
+ ],
+ "p1": [
+ 490,
+ 418.84
+ ]
+ }
+ },
+ {
+ "command": "sketch.finish",
+ "params": {}
+ },
+ {
+ "command": "solid.loft",
+ "params": {
+ "sections": [
+ {
+ "sketch": "LoftTop"
+ },
+ {
+ "sketch": "LoftBottom"
+ }
+ ],
+ "operation": "cut",
+ "name": "LoftCut"
+ }
+ }
+ ]
+}
\ No newline at end of file