SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Motion analysis review round 3: ui.start reads a study as motion.study does, keys off the timeline refused, pairs counted once, sub-assembly copies documented
MateuszSychXplc34e607f5bd5
diff --git a/crates/engine/src/cmd/contact_sweep.rs b/crates/engine/src/cmd/contact_sweep.rsindex 3f5a3483a0..539fc6a005 100644--- a/crates/engine/src/cmd/contact_sweep.rs+++ b/crates/engine/src/cmd/contact_sweep.rs@@ -162,7 +162,7 @@ impl ContactGeometry {/// How many pairs of set members are checked against each other.pub(super) fn pair_count(&self) -> usize {- self.pairs.iter().map(|(_, _, a, b)| (a.0, b.0)).collect::<BTreeSet<_>>().len()+ self.pairs.iter().map(|(_, _, a, b)| (a.0.min(b.0), a.0.max(b.0))).collect::<BTreeSet<_>>().len()}fn frame(body: &CachedBody, s: &Session) -> Result<Mat> {diff --git a/crates/ui-egui/src/dialogs_motion.rs b/crates/ui-egui/src/dialogs_motion.rsindex 7dc65ac0f5..809b35ab02 100644--- a/crates/ui-egui/src/dialogs_motion.rs+++ b/crates/ui-egui/src/dialogs_motion.rs@@ -203,18 +203,17 @@ fn transport(ui: &mut egui::Ui, what: Transport, tip: &str) -> egui::Response {resp.on_hover_text(tip)}-/// Study `key` (an id or a name) as the Motion Study dialog edits it: (id, name, steps, keys as-/// tracks with values in degrees and mm). The dialog keys whole steps, so a study keyed between-/// them (made by a command) is refused rather than rounded.-pub fn study_tracks(s: &Session, key: &str) -> Result<(u64, String, String, Vec<Track>), String> {+/// Study `key` as the Motion Study dialog edits it: (id, name, steps, keys as tracks with values+/// in degrees and mm). `key` is an id first when `id_first`, else a name first (as+/// `motion.study` reads a number and text). The dialog keys whole steps of its timeline, so a+/// study keyed between them or off it (made by a command) is refused rather than changed.+pub fn study_tracks(s: &Session, key: &str, id_first: bool) -> Result<(u64, String, String, Vec<Track>), String> {let studies = &s.doc.assembly.studies;- let m = studies- .iter()- .find(|m| m.id.to_string() == key)- .or_else(|| studies.iter().find(|m| m.name == key))- .ok_or_else(|| format!("no motion study `{key}`"))?;- if m.keys.iter().flat_map(|k| &k.points).any(|(st, _)| st.fract() != 0.0) {- return Err(format!("{} has keys between whole steps, which this dialog can't keep: edit it with motion.study", m.name));+ let (by_id, by_name) = (studies.iter().find(|m| m.id.to_string() == key), studies.iter().find(|m| m.name == key));+ let m = if id_first { by_id.or(by_name) } else { by_name.or(by_id) }.ok_or_else(|| format!("no motion study `{key}`"))?;+ let last = f64::from(m.steps);+ if m.keys.iter().flat_map(|k| &k.points).any(|(st, _)| st.fract() != 0.0 || !(0.0..=last).contains(st)) {+ return Err(format!("{} has keys between whole steps or off its timeline, which this dialog can't keep: edit it with motion.study", m.name));}let tracks = m.keys@@ -238,13 +237,13 @@ pub fn preset(s: &Session, k: &mut Mo, p: &Value) -> Result<(), String> {if let Some(key) = o.keys().find(|k| k.as_str() != "study") {return Err(format!("unknown param `{key}` (Motion Study takes study)"));}- let key = match o.get("study") {- Some(Value::Number(n)) => n.to_string(),- Some(Value::String(x)) => x.clone(),+ let (key, id_first) = match o.get("study") {+ Some(Value::Number(n)) => (n.to_string(), true),+ Some(Value::String(x)) => (x.clone(), false),Some(_) => return Err("`study` must be an id or a name".into()),None => return Ok(()),};- let (id, n, st, t) = study_tracks(s, &key)?;+ let (id, n, st, t) = study_tracks(s, &key, id_first)?;(*study, *name, *steps, *tracks, *shown) = (Some(id.to_string()), n, st, t, None);Ok(())}@@ -506,7 +505,7 @@ pub fn rows(app: &mut SolveApp, ui: &mut egui::Ui, k: &mut Mo, inputs: &mut [Selcombo(ui, "ms_study", &labels, &mut pick);ui.end_row();if pick != was {- match pick.checked_sub(1).and_then(|i| studies.get(i)).map(|(id, _)| study_tracks(&app.session, id)) {+ match pick.checked_sub(1).and_then(|i| studies.get(i)).map(|(id, _)| study_tracks(&app.session, id, true)) {Some(Ok((id, n, st, t))) => {(*study, *name, *steps, *tracks, *shown, *playing) = (Some(id.to_string()), n, st, t, None, false)}diff --git a/crates/ui-egui/src/dialogs_motion_plot.rs b/crates/ui-egui/src/dialogs_motion_plot.rsindex 49aa0d0b4b..52515f47d6 100644--- a/crates/ui-egui/src/dialogs_motion_plot.rs+++ b/crates/ui-egui/src/dialogs_motion_plot.rs@@ -461,9 +461,12 @@ mod tests {.run("motion.study", json!({"name": "Push", "steps": 15, "keys": [{"joint": "Rail", "points": [[0, 10], [15, -5]]}]})).unwrap()["study"].to_string();- // A study keyed between whole steps is not opened (the dialog would round its keys).+ // A study keyed between whole steps or off its timeline is not opened (the dialog would move its keys).h.app.run("motion.study", json!({"name": "Fine", "steps": 15, "keys": [{"joint": "Rail", "points": [[0, 10], [7.5, -5]]}]})).unwrap();- for bad in [json!({"study": "Nope"}), json!({"study": "Push", "step": 3}), json!({"study": [1]}), json!({"study": "Fine"})] {+ h.app.run("motion.study", json!({"name": "Off", "steps": 15, "keys": [{"joint": "Rail", "points": [[-1, 10], [15, -5]]}]})).unwrap();+ for bad in+ [json!({"study": "Nope"}), json!({"study": "Push", "step": 3}), json!({"study": [1]}), json!({"study": "Fine"}), json!({"study": "Off"})]+ {let r = h.call("ui.start", json!({"command": "motion.study", "params": bad}));assert!(r["ok"] == false && h.app.dialog.is_none(), "{bad}: {r}");}diff --git a/docs/book/src/guide/assemblies.md b/docs/book/src/guide/assemblies.mdindex fa3548007e..311545ff21 100644--- a/docs/book/src/guide/assemblies.md+++ b/docs/book/src/guide/assemblies.md@@ -193,10 +193,11 @@ colliding pair with its `first_step`, `last_step`, the `steps` ranges where theyfar into each other (`depth_mm`, the most at `deepest_step`) and their shared `volume_mm3`there (null when it is not cheap to work out). It plays the study as `motion.play` does, butcontact sets don't stop it, and parts are tested at the samples only: a part that passes right-through another between two samples is missed. A check-takes at most 256 bodies; on a large design, list the `occurrences` to check (an arm, with-`against` the parts it must miss). When the work runs out it says `truncated` and the step it-`checked_to`.+through another between two samples is missed. Parts are told apart by occurrence, as contact+sets tell them apart: an occurrence inside a sub-assembly placed twice is one part, so its two+copies are not checked against each other. A check takes at most 256 bodies; on a large design,+list the `occurrences` to check (an arm, with `against` the parts it must miss). When the work+runs out it says `truncated` and the step it `checked_to`.**Insert Design** (`component.insert_design {path, translate?}`, on the **ASSEMBLE** panel andin the **File** menu) adds a component linked to another saved design, so each part can live in