Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Regenerate generated files and fold pending files [skip ci]

github-actions[bot]c571a133dce8
diff --git a/assets/locales/ar.json b/assets/locales/ar.json
index 7c270ede5f..8760d78829 100644
--- a/assets/locales/ar.json
+++ b/assets/locales/ar.json
@@ -731,6 +731,7 @@
"Select edges": "حدد الحواف",
"Select points of the sketch being edited": "حدد نقاطًا من الرسم الجاري تعديله",
"Select the centre the pattern turns around first": "حدد أولًا المركز الذي يدور النمط حوله",
+ "Select the curves to divide first": "حدّد أولًا المنحنيات المراد تقسيمها",
"Select the curves to offset first": "حدد أولًا المنحنيات المراد إزاحتها",
"Select the mirror line": "حدد خط المرآة",
"Select the sketch curves or points to mirror first": "حدد أولًا منحنيات الرسم أو النقاط المراد عكسها",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "خيارات لوحة الرسم",
"cmd.sketch_paste": "لصق عناصر الرسم",
"cmd.sketch_point3d": "نقطة ثلاثية الأبعاد",
+ "cmd.sketch_point_divide": "تقسيم المنحنى",
"cmd.sketch_polygon_circumscribed": "مضلع محيط",
"cmd.sketch_polygon_edge": "مضلع بحافة",
"cmd.sketch_polygon_inscribed": "مضلع محاط",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "ينسخ هندسة الرسم حول نقطة مركز، على دائرة كاملة أو زاوية محددة. استخدمه لدوائر البراغي والأذرع والأسنان.",
"help.sketch.pattern.rectangular": "ينسخ هندسة الرسم في صفوف وأعمدة بمسافات محددة. استخدمه لشبكات الثقوب والشقوق وفتحات التهوية.",
"help.sketch.point": "يضع نقطة رسم. استخدمها مرجعًا للأبعاد والقيود ومراكز الثقوب أو الميزات اللاحقة.",
+ "help.sketch.point.divide": "يضع نقاطًا تقسّم المنحنيات المختارة إلى أطوال متساوية. تبقى النقاط على كل منحنى وتحافظ على تباعدها عند تغيّره.",
"help.sketch.point3d": "يضع نقطة في الفراغ، مع تفعيل الرسم ثلاثي الأبعاد. استخدمها مرجعًا للمنحنيات والمسارات الثلاثية الأبعاد.",
"help.sketch.polygon.circumscribed": "يرسم مضلعًا منتظمًا حول دائرة، بحجم يُحدد من مركزها إلى منتصف ضلع. استخدمه عندما يكون العرض بين الضلعين المتقابلين معروفًا، كما في صامولة سداسية.",
"help.sketch.polygon.edge": "يرسم مضلعًا منتظمًا من طرفي ضلع واحد. استخدمه عندما يكون طول الضلع وموضعه معروفين.",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "تم تطبيق البُعد",
"sketch.dimension_applied_defined": "تم تطبيق البُعد؛ تم تعريف المعامل `{name}`",
"sketch.dimension_applied_renamed": "تم تطبيق البُعد؛ أصبح اسم المعامل `{name}`",
+ "sketch.divide_hint": "تقسّم النقاط كل منحنى إلى أطوال متساوية وتحافظ عليها عند تغيّره.",
"sketch.dof_left": "تبقّت {count} درجات حرية",
"sketch.dof_left_one": "تبقّت {count} درجة حرية",
"sketch.draw_curves": "الرسم كـ {linetype}",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "متصفح العرض المخصص",
"ui.heading_cylinder": "أسطوانة",
"ui.heading_design": "التصميم",
+ "ui.heading_divide_curve": "تقسيم المنحنى",
"ui.heading_draft": "ميل السحب",
"ui.heading_edit": "تعديل",
"ui.heading_equation_curve": "منحنى معادلة",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "الدليل الثاني",
"ui.section_analysis": "تحليل المقطع",
"ui.section_size": "حجم المقطع",
+ "ui.segments": "المقاطع",
"ui.select": "تحديد",
"ui.selectOther": "تحديد آخر…",
"ui.selectTangentChain": "تحديد سلسلة مماسية",
diff --git a/assets/locales/de.json b/assets/locales/de.json
index 7e7f555638..d1d7d13a6a 100644
--- a/assets/locales/de.json
+++ b/assets/locales/de.json
@@ -568,6 +568,7 @@
"Select edges": "Kanten auswählen",
"Select points of the sketch being edited": "Punkte der bearbeiteten Skizze auswählen",
"Select the centre the pattern turns around first": "Zuerst den Mittelpunkt auswählen, um den sich das Muster dreht",
+ "Select the curves to divide first": "Zuerst die zu teilenden Kurven auswählen",
"Select the curves to offset first": "Zuerst die zu versetzenden Kurven auswählen",
"Select the mirror line": "Die Spiegellinie auswählen",
"Select the sketch curves or points to mirror first": "Zuerst die zu spiegelnden Skizzenkurven oder -punkte auswählen",
@@ -1231,6 +1232,7 @@
"cmd.sketch_options": "Skizzenpalettenoptionen",
"cmd.sketch_paste": "Skizzenelemente einfügen",
"cmd.sketch_point3d": "3D-Punkt",
+ "cmd.sketch_point_divide": "Kurve teilen",
"cmd.sketch_polygon_circumscribed": "Umgeschriebenes Polygon",
"cmd.sketch_polygon_edge": "Polygon über eine Kante",
"cmd.sketch_polygon_inscribed": "Eingeschriebenes Polygon",
@@ -1716,6 +1718,7 @@
"help.sketch.pattern.circular": "Kopiert Skizzengeometrie um einen Mittelpunkt, über einen vollen Kreis oder einen festen Winkel. Für Lochkreise, Speichen und Zähne.",
"help.sketch.pattern.rectangular": "Kopiert Skizzengeometrie in Reihen und Spalten mit festen Abständen. Für Raster aus Bohrungen, Schlitzen oder Lüftungsöffnungen.",
"help.sketch.point": "Setzt einen Skizzenpunkt. Als Bezug für Maße, Bedingungen, Bohrungsmitten oder spätere Elemente.",
+ "help.sketch.point.divide": "Setzt Punkte, die die gewählten Kurven in gleich lange Abschnitte teilen. Die Punkte bleiben auf jeder Kurve und behalten ihren Abstand, wenn sie sich ändert.",
"help.sketch.point3d": "Setzt bei eingeschalteter 3D-Skizze einen Punkt im Raum. Als Bezug für 3D-Kurven und Pfade.",
"help.sketch.polygon.circumscribed": "Zeichnet ein regelmäßiges Polygon um einen Kreis, bemessen vom Mittelpunkt zur Mitte einer Seite. Wenn die Schlüsselweite bekannt ist, etwa bei einer Sechskantmutter.",
"help.sketch.polygon.edge": "Zeichnet ein regelmäßiges Polygon aus den beiden Enden einer Seite. Wenn Länge und Lage einer Seite bekannt sind.",
@@ -4341,6 +4344,7 @@
"sketch.dimension_applied": "Maß angewendet",
"sketch.dimension_applied_defined": "Maß angewendet; Parameter `{name}` definiert",
"sketch.dimension_applied_renamed": "Maß angewendet; der Parameter heißt jetzt `{name}`",
+ "sketch.divide_hint": "Punkte teilen jede Kurve in gleich lange Abschnitte und behalten sie bei, wenn sie sich ändert.",
"sketch.dof_left": "{count} Freiheitsgrade übrig",
"sketch.dof_left_one": "{count} Freiheitsgrad übrig",
"sketch.draw_curves": "Als {linetype} zeichnen",
@@ -5197,6 +5201,7 @@
"ui.heading_custom_view_navigator": "EIGENER ANSICHTSNAVIGATOR",
"ui.heading_cylinder": "ZYLINDER",
"ui.heading_design": "DESIGN",
+ "ui.heading_divide_curve": "KURVE TEILEN",
"ui.heading_draft": "ABZIEHEN",
"ui.heading_edit": "BEARBEITEN",
"ui.heading_equation_curve": "GLEICHUNGSKURVE",
@@ -5607,6 +5612,7 @@
"ui.second_rail": "Zweite Leitkurve",
"ui.section_analysis": "Querschnittsanalyse",
"ui.section_size": "Querschnittsgröße",
+ "ui.segments": "Segmente",
"ui.select": "Auswählen",
"ui.selectOther": "Andere auswählen…",
"ui.selectTangentChain": "Tangentialkette auswählen",
diff --git a/assets/locales/en.json b/assets/locales/en.json
index cc91032da3..488bedacfe 100644
--- a/assets/locales/en.json
+++ b/assets/locales/en.json
@@ -731,6 +731,7 @@
"Select edges": "Select edges",
"Select points of the sketch being edited": "Select points of the sketch being edited",
"Select the centre the pattern turns around first": "Select the center the pattern turns around first",
+ "Select the curves to divide first": "Select the curves to divide first",
"Select the curves to offset first": "Select the curves to offset first",
"Select the mirror line": "Select the mirror line",
"Select the sketch curves or points to mirror first": "Select the sketch curves or points to mirror first",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "Sketch Palette Options",
"cmd.sketch_paste": "Paste Sketch Entities",
"cmd.sketch_point3d": "3D Point",
+ "cmd.sketch_point_divide": "Divide Curve",
"cmd.sketch_polygon_circumscribed": "Circumscribed Polygon",
"cmd.sketch_polygon_edge": "Edge Polygon",
"cmd.sketch_polygon_inscribed": "Inscribed Polygon",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "Copies sketch geometry around a centre point, over a full circle or a set angle. Use it for bolt circles, spokes and teeth.",
"help.sketch.pattern.rectangular": "Copies sketch geometry in rows and columns at set spacings. Use it for grids of holes, slots or vents.",
"help.sketch.point": "Places a sketch point. Use it as a reference for dimensions, constraints, hole centres or later features.",
+ "help.sketch.point.divide": "Places points that divide the picked curves into equal lengths. The points stay on each curve and keep their spacing when it changes.",
"help.sketch.point3d": "Places a point in space, with 3D Sketch on. Use it as a reference for 3D curves and paths.",
"help.sketch.polygon.circumscribed": "Draws a regular polygon around a circle, sized from its centre to the middle of a side. Use it when the width across flats is known, as for a hex nut.",
"help.sketch.polygon.edge": "Draws a regular polygon from the two ends of one side. Use it when the length and position of a side are known.",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "Dimension applied",
"sketch.dimension_applied_defined": "Dimension applied; parameter `{name}` defined",
"sketch.dimension_applied_renamed": "Dimension applied; parameter named `{name}`",
+ "sketch.divide_hint": "Points divide each curve into equal lengths and keep them as it changes.",
"sketch.dof_left": "{count} degrees of freedom left",
"sketch.dof_left_one": "{count} degree of freedom left",
"sketch.draw_curves": "Draw as {linetype}",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "CUSTOM VIEW NAVIGATOR",
"ui.heading_cylinder": "CYLINDER",
"ui.heading_design": "DESIGN",
+ "ui.heading_divide_curve": "DIVIDE CURVE",
"ui.heading_draft": "DRAFT",
"ui.heading_edit": "EDIT",
"ui.heading_equation_curve": "EQUATION CURVE",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "Second Rail",
"ui.section_analysis": "Section Analysis",
"ui.section_size": "Section size",
+ "ui.segments": "Segments",
"ui.select": "Select",
"ui.selectOther": "Select Other…",
"ui.selectTangentChain": "Select Tangent Chain",
diff --git a/assets/locales/es.json b/assets/locales/es.json
index 16e4d6eea3..e84609d141 100644
--- a/assets/locales/es.json
+++ b/assets/locales/es.json
@@ -568,6 +568,7 @@
"Select edges": "Selecciona aristas",
"Select points of the sketch being edited": "Selecciona puntos del boceto que se está editando",
"Select the centre the pattern turns around first": "Selecciona primero el centro alrededor del cual gira el patrón",
+ "Select the curves to divide first": "Seleccione primero las curvas que desea dividir",
"Select the curves to offset first": "Selecciona primero las curvas que se van a desfasar",
"Select the mirror line": "Selecciona la línea de simetría",
"Select the sketch curves or points to mirror first": "Selecciona primero las curvas o puntos del boceto que se van a reflejar",
@@ -1221,6 +1222,7 @@
"cmd.sketch_options": "Opciones de la paleta de bocetos",
"cmd.sketch_paste": "Pegar entidades del boceto",
"cmd.sketch_point3d": "Punto 3D",
+ "cmd.sketch_point_divide": "Dividir curva",
"cmd.sketch_polygon_circumscribed": "Polígono circunscrito",
"cmd.sketch_polygon_edge": "Polígono por arista",
"cmd.sketch_polygon_inscribed": "Polígono inscrito",
@@ -1697,6 +1699,7 @@
"help.sketch.pattern.circular": "Copies sketch geometry around a centre point, over a full circle or a set angle. Use it for bolt circles, spokes and teeth.",
"help.sketch.pattern.rectangular": "Copies sketch geometry in rows and columns at set spacings. Use it for grids of holes, slots or vents.",
"help.sketch.point": "Places a sketch point. Use it as a reference for dimensions, constraints, hole centres or later features.",
+ "help.sketch.point.divide": "Coloca puntos que dividen las curvas elegidas en longitudes iguales. Los puntos permanecen en cada curva y mantienen su separación cuando esta cambia.",
"help.sketch.point3d": "Places a point in space, with 3D Sketch on. Use it as a reference for 3D curves and paths.",
"help.sketch.polygon.circumscribed": "Draws a regular polygon around a circle, sized from its centre to the middle of a side. Use it when the width across flats is known, as for a hex nut.",
"help.sketch.polygon.edge": "Draws a regular polygon from the two ends of one side. Use it when the length and position of a side are known.",
@@ -4174,6 +4177,7 @@
"sketch.dimension_applied": "Cota aplicada",
"sketch.dimension_applied_defined": "Cota aplicada; parámetro `{name}` definido",
"sketch.dimension_applied_renamed": "Cota aplicada; parámetro nombrado `{name}`",
+ "sketch.divide_hint": "Los puntos dividen cada curva en longitudes iguales y las mantienen cuando cambia.",
"sketch.dof_left": "Quedan {count} grados de libertad",
"sketch.dof_left_one": "Queda {count} grado de libertad",
"sketch.draw_curves": "Dibujar como {linetype}",
@@ -5055,6 +5059,7 @@
"ui.heading_create_sketch": "CREAR BOCETO",
"ui.heading_cylinder": "CILINDRO",
"ui.heading_design": "DISEÑO",
+ "ui.heading_divide_curve": "DIVIDIR CURVA",
"ui.heading_draft": "ÁNGULO DE SALIDA",
"ui.heading_edit": "EDITAR",
"ui.heading_equation_curve": "CURVA ECUACIÓN",
@@ -5395,6 +5400,7 @@
"ui.second_rail": "Segunda línea guía",
"ui.section_analysis": "Análisis de sección",
"ui.section_size": "Tamaño de la sección",
+ "ui.segments": "Segmentos",
"ui.select": "Seleccionar",
"ui.selectOther": "Seleccionar otro…",
"ui.selectTangentChain": "Seleccionar cadena tangente",
diff --git a/assets/locales/fr.json b/assets/locales/fr.json
index da60a9f251..278816fb4f 100644
--- a/assets/locales/fr.json
+++ b/assets/locales/fr.json
@@ -566,6 +566,7 @@
"Select edges": "Sélectionner des arêtes",
"Select points of the sketch being edited": "Sélectionner des points de l'esquisse en cours de modification",
"Select the centre the pattern turns around first": "Sélectionner d'abord le centre autour duquel la répétition pivote",
+ "Select the curves to divide first": "Sélectionner d'abord les courbes à diviser",
"Select the curves to offset first": "Sélectionner d'abord les courbes à décaler",
"Select the mirror line": "Sélectionner la ligne de symétrie",
"Select the sketch curves or points to mirror first": "Sélectionner d'abord les courbes ou points d'esquisse à symétriser",
@@ -1194,6 +1195,7 @@
"cmd.sketch_options": "Options de la palette d'esquisse",
"cmd.sketch_paste": "Coller les entités d'esquisse",
"cmd.sketch_point3d": "Point 3D",
+ "cmd.sketch_point_divide": "Diviser la courbe",
"cmd.sketch_polygon_circumscribed": "Polygone circonscrit",
"cmd.sketch_polygon_edge": "Polygone par côté",
"cmd.sketch_polygon_inscribed": "Polygone inscrit",
@@ -1638,6 +1640,7 @@
"help.sketch.pattern.circular": "Copie la géométrie d'esquisse autour d'un centre, sur un cercle complet ou un angle donné. À utiliser pour des cercles de perçages, des rayons et des dents.",
"help.sketch.pattern.rectangular": "Copie la géométrie d'esquisse en lignes et colonnes à des espacements donnés. À utiliser pour des grilles de trous, de rainures ou d'aérations.",
"help.sketch.point": "Place un point d'esquisse. À utiliser comme référence pour des cotes, des contraintes, des centres de perçage ou des fonctions ultérieures.",
+ "help.sketch.point.divide": "Place des points qui divisent les courbes choisies en longueurs égales. Les points restent sur chaque courbe et gardent leur espacement quand elle change.",
"help.sketch.point3d": "Place un point dans l'espace, avec Esquisse 3D activée. À utiliser comme référence pour des courbes et trajectoires 3D.",
"help.sketch.polygon.circumscribed": "Dessine un polygone régulier autour d'un cercle, dimensionné du centre au milieu d'un côté. À utiliser lorsque la largeur sur plats est connue, comme pour un écrou hexagonal.",
"help.sketch.polygon.edge": "Dessine un polygone régulier à partir des deux extrémités d'un côté. À utiliser lorsque la longueur et la position d'un côté sont connues.",
@@ -3911,6 +3914,7 @@
"sketch.dimension_applied": "Cote appliquée",
"sketch.dimension_applied_defined": "Cote appliquée ; paramètre `{name}` défini",
"sketch.dimension_applied_renamed": "Cote appliquée ; paramètre nommé `{name}`",
+ "sketch.divide_hint": "Les points divisent chaque courbe en longueurs égales et les gardent quand elle change.",
"sketch.dof_left": "{count} degrés de liberté restants",
"sketch.dof_left_one": "{count} degré de liberté restant",
"sketch.draw_curves": "Dessiner en {linetype}",
@@ -4700,6 +4704,7 @@
"ui.heading_create_sketch": "CRÉER UNE ESQUISSE",
"ui.heading_cylinder": "CYLINDRE",
"ui.heading_design": "DESIGN",
+ "ui.heading_divide_curve": "DIVISER LA COURBE",
"ui.heading_draft": "DÉPOUILLE",
"ui.heading_edit": "ÉDITION",
"ui.heading_equation_curve": "COURBE PAR ÉQUATION",
@@ -5039,6 +5044,7 @@
"ui.second_rail": "Second rail",
"ui.section_analysis": "Analyse de coupe",
"ui.section_size": "Taille de la section",
+ "ui.segments": "Segments",
"ui.select": "Sélectionner",
"ui.selectOther": "Sélectionner un autre…",
"ui.selectTangentChain": "Sélectionner la chaîne tangente",
diff --git a/assets/locales/he.json b/assets/locales/he.json
index 95436676de..6b33e30c0a 100644
--- a/assets/locales/he.json
+++ b/assets/locales/he.json
@@ -731,6 +731,7 @@
"Select edges": "בחירת מקצועות",
"Select points of the sketch being edited": "יש לבחור נקודות של הסקיצה הנערכת",
"Select the centre the pattern turns around first": "יש לבחור תחילה את המרכז שסביבו המערך מסתובב",
+ "Select the curves to divide first": "יש לבחור תחילה את העקומות לחלוקה",
"Select the curves to offset first": "יש לבחור תחילה את העקומות להיסט",
"Select the mirror line": "יש לבחור את קו השיקוף",
"Select the sketch curves or points to mirror first": "יש לבחור תחילה את עקומות הסקיצה או הנקודות לשיקוף",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "אפשרויות חלונית הסקיצה",
"cmd.sketch_paste": "הדבקת ישויות סקיצה",
"cmd.sketch_point3d": "נקודה תלת־ממדית",
+ "cmd.sketch_point_divide": "חלוקת עקומה",
"cmd.sketch_polygon_circumscribed": "מצולע חוסם",
"cmd.sketch_polygon_edge": "מצולע לפי צלע",
"cmd.sketch_polygon_inscribed": "מצולע חסום",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "מעתיק גאומטריית סקיצה סביב נקודת מרכז, על פני מעגל שלם או זווית נתונה. מתאים למעגלי ברגים, לחישורים ולשיניים.",
"help.sketch.pattern.rectangular": "מעתיק גאומטריית סקיצה בשורות ובעמודות במרווחים קבועים. מתאים לרשתות של חורים, חריצים או פתחי אוורור.",
"help.sketch.point": "מציב נקודת סקיצה. משמש כייחוס למידות, לאילוצים, למרכזי חורים או למאפיינים מאוחרים יותר.",
+ "help.sketch.point.divide": "מציב נקודות המחלקות את העקומות שנבחרו לאורכים שווים. הנקודות נשארות על כל עקומה ושומרות על המרווח כשהיא משתנה.",
"help.sketch.point3d": "מציב נקודה במרחב, כשסקיצה תלת־ממדית פעילה. משמש כייחוס לעקומות ולמסלולים תלת־ממדיים.",
"help.sketch.polygon.circumscribed": "משרטט מצולע משוכלל סביב מעגל, בגודל שנקבע ממרכזו ועד אמצע צלע. מתאים כשהרוחב בין הצלעות ידוע, כמו באום משושה.",
"help.sketch.polygon.edge": "משרטט מצולע משוכלל משני קצותיה של צלע אחת. מתאים כשאורך הצלע ומיקומה ידועים.",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "המידה הוחלה",
"sketch.dimension_applied_defined": "המידה הוחלה; הפרמטר `{name}` הוגדר",
"sketch.dimension_applied_renamed": "המידה הוחלה; שם הפרמטר הוא כעת `{name}`",
+ "sketch.divide_hint": "הנקודות מחלקות כל עקומה לאורכים שווים ושומרות עליהם כשהיא משתנה.",
"sketch.dof_left": "נותרו {count} דרגות חופש",
"sketch.dof_left_one": "נותרה {count} דרגת חופש",
"sketch.draw_curves": "שרטוט כ־{linetype}",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "ניווט תצוגה מותאם אישית",
"ui.heading_cylinder": "גליל",
"ui.heading_design": "תכן",
+ "ui.heading_divide_curve": "חלוקת עקומה",
"ui.heading_draft": "שיפוע יציקה",
"ui.heading_edit": "עריכה",
"ui.heading_equation_curve": "עקומת משוואה",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "מסילה שנייה",
"ui.section_analysis": "ניתוח חתך",
"ui.section_size": "גודל החתך",
+ "ui.segments": "מקטעים",
"ui.select": "בחירה",
"ui.selectOther": "בחירת אחר…",
"ui.selectTangentChain": "בחירת שרשרת משיקה",
diff --git a/assets/locales/it.json b/assets/locales/it.json
index 744eeab461..f052010a12 100644
--- a/assets/locales/it.json
+++ b/assets/locales/it.json
@@ -567,6 +567,7 @@
"Select edges": "Seleziona spigoli",
"Select points of the sketch being edited": "Seleziona punti dello schizzo in modifica",
"Select the centre the pattern turns around first": "Seleziona prima il centro attorno a cui ruota la serie",
+ "Select the curves to divide first": "Selezionare prima le curve da dividere",
"Select the curves to offset first": "Seleziona prima le curve per l'offset",
"Select the mirror line": "Seleziona la linea di simmetria",
"Select the sketch curves or points to mirror first": "Seleziona prima le curve o i punti dello schizzo da specchiare",
@@ -1194,6 +1195,7 @@
"cmd.sketch_options": "Opzioni della tavolozza schizzo",
"cmd.sketch_paste": "Incolla entità dello schizzo",
"cmd.sketch_point3d": "Punto 3D",
+ "cmd.sketch_point_divide": "Dividi curva",
"cmd.sketch_polygon_circumscribed": "Poligono circoscritto",
"cmd.sketch_polygon_edge": "Poligono per lato",
"cmd.sketch_polygon_inscribed": "Poligono inscritto",
@@ -1637,6 +1639,7 @@
"help.sketch.pattern.circular": "Copia la geometria dello schizzo attorno a un punto centrale, su un cerchio completo o su un angolo stabilito. Usalo per cerchi di bulloni, raggi e denti.",
"help.sketch.pattern.rectangular": "Copia la geometria dello schizzo in righe e colonne con spaziature stabilite. Usalo per griglie di fori, asole o prese d'aria.",
"help.sketch.point": "Colloca un punto dello schizzo. Usalo come riferimento per quote, vincoli, centri di fori o lavorazioni successive.",
+ "help.sketch.point.divide": "Posiziona punti che dividono le curve scelte in lunghezze uguali. I punti restano su ogni curva e ne mantengono la spaziatura quando cambia.",
"help.sketch.point3d": "Colloca un punto nello spazio, con Schizzo 3D attivo. Usalo come riferimento per curve e percorsi 3D.",
"help.sketch.polygon.circumscribed": "Disegna un poligono regolare attorno a un cerchio, dimensionato dal centro al punto medio di un lato. Usalo quando è nota l'apertura chiave, come per un dado esagonale.",
"help.sketch.polygon.edge": "Disegna un poligono regolare a partire dai due estremi di un lato. Usalo quando sono note la lunghezza e la posizione di un lato.",
@@ -3902,6 +3905,7 @@
"sketch.dimension_applied": "Quota applicata",
"sketch.dimension_applied_defined": "Quota applicata; parametro `{name}` definito",
"sketch.dimension_applied_renamed": "Quota applicata; parametro denominato `{name}`",
+ "sketch.divide_hint": "I punti dividono ogni curva in lunghezze uguali e le mantengono quando cambia.",
"sketch.dof_left": "{count} gradi di libertà rimanenti",
"sketch.dof_left_one": "{count} grado di libertà rimanente",
"sketch.draw_curves": "Disegna come {linetype}",
@@ -4691,6 +4695,7 @@
"ui.heading_create_sketch": "CREA SCHIZZO",
"ui.heading_cylinder": "CILINDRO",
"ui.heading_design": "PROGETTAZIONE",
+ "ui.heading_divide_curve": "DIVIDI CURVA",
"ui.heading_draft": "SFORMO",
"ui.heading_edit": "MODIFICA",
"ui.heading_equation_curve": "CURVA DA EQUAZIONE",
@@ -5029,6 +5034,7 @@
"ui.second_rail": "Seconda guida",
"ui.section_analysis": "Analisi in sezione",
"ui.section_size": "Dimensione della sezione",
+ "ui.segments": "Segmenti",
"ui.select": "Seleziona",
"ui.selectOther": "Seleziona altro…",
"ui.selectTangentChain": "Seleziona catena tangente",
diff --git a/assets/locales/ja.json b/assets/locales/ja.json
index 181519827c..ec1297c5be 100644
--- a/assets/locales/ja.json
+++ b/assets/locales/ja.json
@@ -731,6 +731,7 @@
"Select edges": "エッジを選択",
"Select points of the sketch being edited": "編集中のスケッチの点を選択してください",
"Select the centre the pattern turns around first": "パターンの回転中心を先に選択してください",
+ "Select the curves to divide first": "先に分割する曲線を選択してください",
"Select the curves to offset first": "オフセットする曲線を先に選択してください",
"Select the mirror line": "ミラー線を選択してください",
"Select the sketch curves or points to mirror first": "ミラーするスケッチの曲線または点を先に選択してください",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "スケッチ パレット オプション",
"cmd.sketch_paste": "スケッチ要素を貼り付け",
"cmd.sketch_point3d": "3D 点",
+ "cmd.sketch_point_divide": "曲線を分割",
"cmd.sketch_polygon_circumscribed": "外接ポリゴン",
"cmd.sketch_polygon_edge": "エッジ ポリゴン",
"cmd.sketch_polygon_inscribed": "内接ポリゴン",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "スケッチ ジオメトリを中心点まわりに、全周または指定角度でコピーします。ボルト円、スポーク、歯に使います。",
"help.sketch.pattern.rectangular": "スケッチ ジオメトリを、指定した間隔で行と列にコピーします。穴、スロット、通気口の格子に使います。",
"help.sketch.point": "スケッチ点を配置します。寸法、拘束、穴の中心、後のフィーチャの参照として使います。",
+ "help.sketch.point.divide": "選択した曲線を等しい長さに分割する点を配置します。点は各曲線上にとどまり、曲線が変わっても間隔を保ちます。",
"help.sketch.point3d": "3D スケッチをオンにして、空間内に点を配置します。3D 曲線やパスの参照として使います。",
"help.sketch.polygon.circumscribed": "円の外側に接する正多角形を、中心から辺の中央までのサイズで描きます。六角ナットのように、二面幅が決まっているときに使います。",
"help.sketch.polygon.edge": "1辺の両端から正多角形を描きます。辺の長さと位置が決まっているときに使います。",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "寸法を適用しました",
"sketch.dimension_applied_defined": "寸法を適用しました。パラメータ `{name}` を定義しました",
"sketch.dimension_applied_renamed": "寸法を適用しました。パラメータ名を `{name}` にしました",
+ "sketch.divide_hint": "点は各曲線を等しい長さに分割し、曲線が変わってもその分割を保ちます。",
"sketch.dof_left": "残り自由度 {count}",
"sketch.dof_left_one": "残り自由度 {count}",
"sketch.draw_curves": "{linetype}として描く",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "カスタム ビューナビゲーター",
"ui.heading_cylinder": "円柱",
"ui.heading_design": "デザイン",
+ "ui.heading_divide_curve": "曲線を分割",
"ui.heading_draft": "勾配",
"ui.heading_edit": "編集",
"ui.heading_equation_curve": "方程式曲線",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "第2レール",
"ui.section_analysis": "断面解析",
"ui.section_size": "断面サイズ",
+ "ui.segments": "分割数",
"ui.select": "選択",
"ui.selectOther": "その他を選択…",
"ui.selectTangentChain": "接線チェーンを選択",
diff --git a/assets/locales/ko.json b/assets/locales/ko.json
index 6347c45874..f7143e89db 100644
--- a/assets/locales/ko.json
+++ b/assets/locales/ko.json
@@ -547,6 +547,7 @@
"Select edges": "모서리 선택",
"Select points of the sketch being edited": "편집 중인 스케치의 점을 선택하세요",
"Select the centre the pattern turns around first": "패턴이 회전할 중심을 먼저 선택하세요",
+ "Select the curves to divide first": "먼저 분할할 곡선을 선택하세요",
"Select the curves to offset first": "오프셋할 곡선을 먼저 선택하세요",
"Select the mirror line": "대칭선을 선택하세요",
"Select the sketch curves or points to mirror first": "대칭 복사할 스케치 곡선 또는 점을 먼저 선택하세요",
@@ -1169,6 +1170,7 @@
"cmd.sketch_options": "스케치 팔레트 옵션",
"cmd.sketch_paste": "스케치 요소 붙여넣기",
"cmd.sketch_point3d": "3D 점",
+ "cmd.sketch_point_divide": "곡선 분할",
"cmd.sketch_polygon_circumscribed": "외접 다각형",
"cmd.sketch_polygon_edge": "변 다각형",
"cmd.sketch_polygon_inscribed": "내접 다각형",
@@ -1449,6 +1451,7 @@
"help.sketch.construction_line.tangent_two": "두 원 또는 원호를 선택한 뒤 미리보기에서 공통 접선을 선택합니다. 접점은 그려진 곡선 위에 있어야 합니다.",
"help.sketch.construction_line.vertical": "한 점을 지나는 무한 수직 보조 직선을 만듭니다. 나중에 편집해도 수직 구속이 유지됩니다.",
"help.sketch.equation_curve": "범위에 걸쳐 수식으로 곡선을 그립니다: x(t)와 y(t), 또는 y = f(x). 수식에 매개변수를 쓸 수 있으며 곡선이 그 값을 따라갑니다. 사인파, 나선, 기어 이의 인벌류트에 사용합니다.",
+ "help.sketch.point.divide": "선택한 곡선을 같은 길이로 나누는 점을 배치합니다. 점은 각 곡선 위에 남고 곡선이 바뀌어도 간격을 유지합니다.",
"help.solid.chamfer": "선택한 모서리를 지정한 거리만큼 평평하게 깎습니다. 날카로운 모서리를 다듬거나 핀 또는 나사가 쉽게 들어가도록 할 때 사용합니다.",
"help.solid.combine": "바디를 결합하거나, 대상 바디에서 잘라내거나, 서로 겹치는 체적만 남기며, 도구 바디를 유지할 수도 있습니다. 부품을 합치거나, 한 형상으로 다른 형상을 잘라내거나, 두 바디가 겹치는 곳을 찾을 때 사용합니다.",
"help.solid.extrude": "스케치 프로파일을 지정한 거리만큼 3D로 밀어내 재료를 더하거나 제거합니다. 평면 윤곽을 블록, 보스 또는 포켓으로 만들 때 사용합니다.",
@@ -3862,6 +3865,7 @@
"sketch.dimension_applied": "치수를 적용했습니다",
"sketch.dimension_applied_defined": "치수를 적용했습니다. 매개변수 `{name}`을(를) 정의했습니다",
"sketch.dimension_applied_renamed": "치수를 적용했습니다. 매개변수 이름을 `{name}`(으)로 지정했습니다",
+ "sketch.divide_hint": "점은 각 곡선을 같은 길이로 나누고 곡선이 바뀌어도 이를 유지합니다.",
"sketch.dof_left": "남은 자유도 {count}개",
"sketch.dof_left_one": "남은 자유도 {count}개",
"sketch.draw_curves": "{linetype}(으)로 그리기",
@@ -4673,6 +4677,7 @@
"ui.heading_custom_view_navigator": "사용자 지정 뷰 탐색기",
"ui.heading_cylinder": "원통",
"ui.heading_design": "디자인",
+ "ui.heading_divide_curve": "곡선 분할",
"ui.heading_draft": "구배",
"ui.heading_edit": "편집",
"ui.heading_equation_curve": "방정식 곡선",
@@ -5061,6 +5066,7 @@
"ui.second_rail": "두 번째 레일",
"ui.section_analysis": "단면 분석",
"ui.section_size": "단면 크기",
+ "ui.segments": "세그먼트 수",
"ui.select": "선택",
"ui.selectOther": "기타 선택…",
"ui.selectTangentChain": "접선 체인 선택",
diff --git a/assets/locales/pending/sketch-divide-curve.json b/assets/locales/pending/sketch-divide-curve.json
deleted file mode 100644
index 2cd081ed01..0000000000
--- a/assets/locales/pending/sketch-divide-curve.json
+++ /dev/null
@@ -1,114 +0,0 @@
-{
- "en": {
- "cmd.sketch_point_divide": "Divide Curve",
- "help.sketch.point.divide": "Places points that divide the picked curves into equal lengths. The points stay on each curve and keep their spacing when it changes.",
- "ui.heading_divide_curve": "DIVIDE CURVE",
- "ui.segments": "Segments",
- "sketch.divide_hint": "Points divide each curve into equal lengths and keep them as it changes.",
- "Select the curves to divide first": "Select the curves to divide first"
- },
- "ar": {
- "cmd.sketch_point_divide": "تقسيم المنحنى",
- "help.sketch.point.divide": "يضع نقاطًا تقسّم المنحنيات المختارة إلى أطوال متساوية. تبقى النقاط على كل منحنى وتحافظ على تباعدها عند تغيّره.",
- "ui.heading_divide_curve": "تقسيم المنحنى",
- "ui.segments": "المقاطع",
- "sketch.divide_hint": "تقسّم النقاط كل منحنى إلى أطوال متساوية وتحافظ عليها عند تغيّره.",
- "Select the curves to divide first": "حدّد أولًا المنحنيات المراد تقسيمها"
- },
- "de": {
- "cmd.sketch_point_divide": "Kurve teilen",
- "help.sketch.point.divide": "Setzt Punkte, die die gewählten Kurven in gleich lange Abschnitte teilen. Die Punkte bleiben auf jeder Kurve und behalten ihren Abstand, wenn sie sich ändert.",
- "ui.heading_divide_curve": "KURVE TEILEN",
- "ui.segments": "Segmente",
- "sketch.divide_hint": "Punkte teilen jede Kurve in gleich lange Abschnitte und behalten sie bei, wenn sie sich ändert.",
- "Select the curves to divide first": "Zuerst die zu teilenden Kurven auswählen"
- },
- "es": {
- "cmd.sketch_point_divide": "Dividir curva",
- "help.sketch.point.divide": "Coloca puntos que dividen las curvas elegidas en longitudes iguales. Los puntos permanecen en cada curva y mantienen su separación cuando esta cambia.",
- "ui.heading_divide_curve": "DIVIDIR CURVA",
- "ui.segments": "Segmentos",
- "sketch.divide_hint": "Los puntos dividen cada curva en longitudes iguales y las mantienen cuando cambia.",
- "Select the curves to divide first": "Seleccione primero las curvas que desea dividir"
- },
- "fr": {
- "cmd.sketch_point_divide": "Diviser la courbe",
- "help.sketch.point.divide": "Place des points qui divisent les courbes choisies en longueurs égales. Les points restent sur chaque courbe et gardent leur espacement quand elle change.",
- "ui.heading_divide_curve": "DIVISER LA COURBE",
- "ui.segments": "Segments",
- "sketch.divide_hint": "Les points divisent chaque courbe en longueurs égales et les gardent quand elle change.",
- "Select the curves to divide first": "Sélectionner d'abord les courbes à diviser"
- },
- "he": {
- "cmd.sketch_point_divide": "חלוקת עקומה",
- "help.sketch.point.divide": "מציב נקודות המחלקות את העקומות שנבחרו לאורכים שווים. הנקודות נשארות על כל עקומה ושומרות על המרווח כשהיא משתנה.",
- "ui.heading_divide_curve": "חלוקת עקומה",
- "ui.segments": "מקטעים",
- "sketch.divide_hint": "הנקודות מחלקות כל עקומה לאורכים שווים ושומרות עליהם כשהיא משתנה.",
- "Select the curves to divide first": "יש לבחור תחילה את העקומות לחלוקה"
- },
- "it": {
- "cmd.sketch_point_divide": "Dividi curva",
- "help.sketch.point.divide": "Posiziona punti che dividono le curve scelte in lunghezze uguali. I punti restano su ogni curva e ne mantengono la spaziatura quando cambia.",
- "ui.heading_divide_curve": "DIVIDI CURVA",
- "ui.segments": "Segmenti",
- "sketch.divide_hint": "I punti dividono ogni curva in lunghezze uguali e le mantengono quando cambia.",
- "Select the curves to divide first": "Selezionare prima le curve da dividere"
- },
- "ja": {
- "cmd.sketch_point_divide": "曲線を分割",
- "help.sketch.point.divide": "選択した曲線を等しい長さに分割する点を配置します。点は各曲線上にとどまり、曲線が変わっても間隔を保ちます。",
- "ui.heading_divide_curve": "曲線を分割",
- "ui.segments": "分割数",
- "sketch.divide_hint": "点は各曲線を等しい長さに分割し、曲線が変わってもその分割を保ちます。",
- "Select the curves to divide first": "先に分割する曲線を選択してください"
- },
- "ko": {
- "cmd.sketch_point_divide": "곡선 분할",
- "help.sketch.point.divide": "선택한 곡선을 같은 길이로 나누는 점을 배치합니다. 점은 각 곡선 위에 남고 곡선이 바뀌어도 간격을 유지합니다.",
- "ui.heading_divide_curve": "곡선 분할",
- "ui.segments": "세그먼트 수",
- "sketch.divide_hint": "점은 각 곡선을 같은 길이로 나누고 곡선이 바뀌어도 이를 유지합니다.",
- "Select the curves to divide first": "먼저 분할할 곡선을 선택하세요"
- },
- "pt-BR": {
- "cmd.sketch_point_divide": "Dividir curva",
- "help.sketch.point.divide": "Coloca pontos que dividem as curvas escolhidas em comprimentos iguais. Os pontos ficam em cada curva e mantêm o espaçamento quando ela muda.",
- "ui.heading_divide_curve": "DIVIDIR CURVA",
- "ui.segments": "Segmentos",
- "sketch.divide_hint": "Os pontos dividem cada curva em comprimentos iguais e os mantêm quando ela muda.",
- "Select the curves to divide first": "Selecione primeiro as curvas a dividir"
- },
- "ru": {
- "cmd.sketch_point_divide": "Разделить кривую",
- "help.sketch.point.divide": "Ставит точки, делящие выбранные кривые на равные по длине части. Точки остаются на каждой кривой и сохраняют шаг при её изменении.",
- "ui.heading_divide_curve": "РАЗДЕЛИТЬ КРИВУЮ",
- "ui.segments": "Сегменты",
- "sketch.divide_hint": "Точки делят каждую кривую на равные по длине части и сохраняют их при её изменении.",
- "Select the curves to divide first": "Сначала выберите кривые для деления"
- },
- "vi": {
- "cmd.sketch_point_divide": "Chia đường cong",
- "help.sketch.point.divide": "Đặt các điểm chia các đường cong đã chọn thành những đoạn dài bằng nhau. Các điểm nằm trên mỗi đường cong và giữ khoảng cách khi đường cong thay đổi.",
- "ui.heading_divide_curve": "CHIA ĐƯỜNG CONG",
- "ui.segments": "Số đoạn",
- "sketch.divide_hint": "Các điểm chia mỗi đường cong thành những đoạn dài bằng nhau và giữ nguyên khi đường cong thay đổi.",
- "Select the curves to divide first": "Hãy chọn các đường cong cần chia trước"
- },
- "zh": {
- "cmd.sketch_point_divide": "等分曲线",
- "help.sketch.point.divide": "放置将所选曲线分成等长段的点。这些点留在各曲线上,曲线改变时保持间距。",
- "ui.heading_divide_curve": "等分曲线",
- "ui.segments": "段数",
- "sketch.divide_hint": "点将每条曲线分成等长的段,并在曲线改变时保持等分。",
- "Select the curves to divide first": "请先选择要等分的曲线"
- },
- "zh-TW": {
- "cmd.sketch_point_divide": "等分曲線",
- "help.sketch.point.divide": "放置將所選曲線分成等長段的點。這些點留在各曲線上,曲線改變時保持間距。",
- "ui.heading_divide_curve": "等分曲線",
- "ui.segments": "段數",
- "sketch.divide_hint": "點將每條曲線分成等長的段,並在曲線改變時保持等分。",
- "Select the curves to divide first": "請先選擇要等分的曲線"
- }
-}
diff --git a/assets/locales/pt-BR.json b/assets/locales/pt-BR.json
index fe06b03df3..56c850c08a 100644
--- a/assets/locales/pt-BR.json
+++ b/assets/locales/pt-BR.json
@@ -433,6 +433,7 @@
"Select bodies (a face picks its body)": "Selecione corpos (uma face seleciona seu corpo)",
"Select bodies or faces instead": "Selecionar corpos ou faces em vez disso",
"Select edges": "Selecione arestas",
+ "Select the curves to divide first": "Selecione primeiro as curvas a dividir",
"Selection filter": "Filtro de seleção",
"Semantic faces share their appearance across instances.": "Faces semânticas compartilham a aparência entre instâncias.",
"Send your report on GitHub": "Envie seu relatório no GitHub",
@@ -878,6 +879,7 @@
"cmd.sketch_options": "Opções da paleta de esboço",
"cmd.sketch_paste": "Colar entidades do esboço",
"cmd.sketch_point3d": "Ponto 3D",
+ "cmd.sketch_point_divide": "Dividir curva",
"cmd.sketch_polygon_circumscribed": "Polígono circunscrito",
"cmd.sketch_polygon_edge": "Polígono por aresta",
"cmd.sketch_polygon_inscribed": "Polígono inscrito",
@@ -1055,6 +1057,7 @@
"help.licences": "Licenças",
"help.mit": "Licença MIT",
"help.notice": "NOTICE",
+ "help.sketch.point.divide": "Coloca pontos que dividem as curvas escolhidas em comprimentos iguais. Os pontos ficam em cada curva e mantêm o espaçamento quando ela muda.",
"help.solid.chamfer": "Corta as arestas selecionadas com um bisel plano na distância que você definir. Use para quebrar arestas vivas ou facilitar a entrada de um pino ou parafuso.",
"help.solid.extrude": "Empurra um perfil de esboço para o 3D ao longo de uma distância, adicionando ou removendo material. Use para transformar um contorno plano em um bloco, um ressalto ou um rebaixo.",
"help.solid.fillet": "Arredonda as arestas selecionadas com uma concordância circular suave do raio que você definir. Use para suavizar arestas vivas, por resistência, conforto ou aparência.",
@@ -1441,6 +1444,7 @@
"shortcut.pin": "Fixar no topo da caixa S",
"shortcut.unpin": "Desafixar",
"sketch.degrees_of_freedom": "{count} graus de liberdade",
+ "sketch.divide_hint": "Os pontos dividem cada curva em comprimentos iguais e os mantêm quando ela muda.",
"sketch.dof_left": "{count} graus de liberdade restantes",
"sketch.dof_left_one": "{count} grau de liberdade restante",
"sketch.draw_curves": "Desenhar como {linetype}",
@@ -2017,6 +2021,7 @@
"ui.heading_create_sketch": "CRIAR ESBOÇO",
"ui.heading_cylinder": "CILINDRO",
"ui.heading_design": "PROJETO",
+ "ui.heading_divide_curve": "DIVIDIR CURVA",
"ui.heading_draft": "ÂNGULO DE SAÍDA",
"ui.heading_edit": "EDITAR",
"ui.heading_extrude": "EXTRUDAR",
@@ -2274,6 +2279,7 @@
"ui.scale": "Escala",
"ui.second_rail": "Segundo trilho",
"ui.section_analysis": "Análise de seção",
+ "ui.segments": "Segmentos",
"ui.select": "Selecionar",
"ui.selectOther": "Selecionar outro…",
"ui.selectTangentChain": "Selecionar cadeia tangente",
diff --git a/assets/locales/ru.json b/assets/locales/ru.json
index 214556303c..d767fb58bb 100644
--- a/assets/locales/ru.json
+++ b/assets/locales/ru.json
@@ -567,6 +567,7 @@
"Select edges": "Выберите рёбра",
"Select points of the sketch being edited": "Выберите точки редактируемого эскиза",
"Select the centre the pattern turns around first": "Сначала выберите центр, вокруг которого поворачивается массив",
+ "Select the curves to divide first": "Сначала выберите кривые для деления",
"Select the curves to offset first": "Сначала выберите кривые для смещения",
"Select the mirror line": "Выберите линию зеркала",
"Select the sketch curves or points to mirror first": "Сначала выберите кривые или точки эскиза для зеркального отражения",
@@ -1185,6 +1186,7 @@
"cmd.sketch_options": "Параметры палитры эскиза",
"cmd.sketch_paste": "Вставить элементы эскиза",
"cmd.sketch_point3d": "3D-точка",
+ "cmd.sketch_point_divide": "Разделить кривую",
"cmd.sketch_polygon_circumscribed": "Описанный многоугольник",
"cmd.sketch_polygon_edge": "Многоугольник по ребру",
"cmd.sketch_polygon_inscribed": "Вписанный многоугольник",
@@ -1623,6 +1625,7 @@
"help.sketch.pattern.circular": "Копирует геометрию эскиза вокруг центральной точки на полный круг или заданный угол. Используйте для окружностей болтов, спиц и зубьев.",
"help.sketch.pattern.rectangular": "Копирует геометрию эскиза рядами и столбцами с заданным шагом. Используйте для сеток отверстий, пазов или вентиляционных прорезей.",
"help.sketch.point": "Ставит точку эскиза. Используйте как ориентир для размеров, ограничений, центров отверстий или последующих операций.",
+ "help.sketch.point.divide": "Ставит точки, делящие выбранные кривые на равные по длине части. Точки остаются на каждой кривой и сохраняют шаг при её изменении.",
"help.sketch.point3d": "Ставит точку в пространстве при включённом 3D-эскизе. Используйте как ориентир для 3D-кривых и траекторий.",
"help.sketch.polygon.circumscribed": "Рисует правильный многоугольник вокруг окружности; размер задаётся от центра до середины стороны. Используйте, когда известен размер под ключ, например у шестигранной гайки.",
"help.sketch.polygon.edge": "Рисует правильный многоугольник по двум концам одной стороны. Используйте, когда известны длина и положение стороны.",
@@ -3840,6 +3843,7 @@
"sketch.dimension_applied": "Размер применён",
"sketch.dimension_applied_defined": "Размер применён; параметр `{name}` определён",
"sketch.dimension_applied_renamed": "Размер применён; параметру присвоено имя `{name}`",
+ "sketch.divide_hint": "Точки делят каждую кривую на равные по длине части и сохраняют их при её изменении.",
"sketch.dof_left": "Осталось степеней свободы: {count}",
"sketch.dof_left_one": "Осталась {count} степень свободы",
"sketch.draw_curves": "Рисовать как {linetype}",
@@ -4629,6 +4633,7 @@
"ui.heading_create_sketch": "СОЗДАТЬ ЭСКИЗ",
"ui.heading_cylinder": "ЦИЛИНДР",
"ui.heading_design": "ДИЗАЙН",
+ "ui.heading_divide_curve": "РАЗДЕЛИТЬ КРИВУЮ",
"ui.heading_draft": "УКЛОН",
"ui.heading_edit": "ИЗМЕНИТЬ",
"ui.heading_equation_curve": "КРИВАЯ ПО УРАВНЕНИЮ",
@@ -4956,6 +4961,7 @@
"ui.second_rail": "Вторая направляющая",
"ui.section_analysis": "Анализ сечения",
"ui.section_size": "Размер сечения",
+ "ui.segments": "Сегменты",
"ui.select": "Выбрать",
"ui.selectOther": "Выбрать другое…",
"ui.selectTangentChain": "Выбрать касательную цепочку",
diff --git a/assets/locales/vi.json b/assets/locales/vi.json
index b5db4d1f08..d069e04771 100644
--- a/assets/locales/vi.json
+++ b/assets/locales/vi.json
@@ -731,6 +731,7 @@
"Select edges": "Chọn các cạnh",
"Select points of the sketch being edited": "Chọn các điểm của phác thảo đang chỉnh sửa",
"Select the centre the pattern turns around first": "Hãy chọn tâm mà mảng xoay quanh trước",
+ "Select the curves to divide first": "Hãy chọn các đường cong cần chia trước",
"Select the curves to offset first": "Hãy chọn các đường cong cần offset trước",
"Select the mirror line": "Chọn đường đối xứng",
"Select the sketch curves or points to mirror first": "Hãy chọn các đường cong hoặc điểm phác thảo cần đối xứng trước",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "Tùy chọn bảng phác thảo",
"cmd.sketch_paste": "Dán các thực thể phác thảo",
"cmd.sketch_point3d": "3D Điểm",
+ "cmd.sketch_point_divide": "Chia đường cong",
"cmd.sketch_polygon_circumscribed": "Đa giác ngoại tiếp",
"cmd.sketch_polygon_edge": "Đa giác theo cạnh (Edge Polygon)",
"cmd.sketch_polygon_inscribed": "Đa giác nội tiếp",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "Sao chép hình học phác thảo quanh một tâm, trên cả vòng tròn hoặc một góc cho trước. Dùng cho vòng lỗ bu lông, nan hoa và răng.",
"help.sketch.pattern.rectangular": "Sao chép hình học phác thảo theo hàng và cột với khoảng cách cho trước. Dùng cho lưới lỗ, rãnh then hoặc khe thông gió.",
"help.sketch.point": "Đặt một điểm phác thảo. Dùng làm tham chiếu cho kích thước, ràng buộc, tâm lỗ hoặc các tính năng sau này.",
+ "help.sketch.point.divide": "Đặt các điểm chia các đường cong đã chọn thành những đoạn dài bằng nhau. Các điểm nằm trên mỗi đường cong và giữ khoảng cách khi đường cong thay đổi.",
"help.sketch.point3d": "Đặt một điểm trong không gian, khi bật 3D Phác thảo. Dùng làm tham chiếu cho đường cong và đường dẫn 3D.",
"help.sketch.polygon.circumscribed": "Vẽ đa giác đều bao quanh một đường tròn, kích thước tính từ tâm đến trung điểm một cạnh. Dùng khi biết khoảng cách giữa hai cạnh đối diện, như với đai ốc lục giác.",
"help.sketch.polygon.edge": "Vẽ đa giác đều từ hai đầu mút của một cạnh. Dùng khi biết chiều dài và vị trí của cạnh.",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "Đã áp dụng kích thước",
"sketch.dimension_applied_defined": "Đã áp dụng kích thước; đã định nghĩa tham số `{name}`",
"sketch.dimension_applied_renamed": "Đã áp dụng kích thước; tham số được đặt tên là `{name}`",
+ "sketch.divide_hint": "Các điểm chia mỗi đường cong thành những đoạn dài bằng nhau và giữ nguyên khi đường cong thay đổi.",
"sketch.dof_left": "Còn {count} bậc tự do",
"sketch.dof_left_one": "Còn {count} bậc tự do",
"sketch.draw_curves": "Vẽ dưới dạng {linetype}",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "KHỐI ĐIỀU HƯỚNG GÓC NHÌN TÙY CHỈNH",
"ui.heading_cylinder": "HÌNH TRỤ",
"ui.heading_design": "THIẾT KẾ",
+ "ui.heading_divide_curve": "CHIA ĐƯỜNG CONG",
"ui.heading_draft": "ĐỘ DỐC THOÁT KHUÔN",
"ui.heading_edit": "CHỈNH SỬA",
"ui.heading_equation_curve": "ĐƯỜNG CONG PHƯƠNG TRÌNH",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "Đường ray dẫn hướng thứ hai",
"ui.section_analysis": "Phân tích mặt cắt",
"ui.section_size": "Kích thước mặt cắt",
+ "ui.segments": "Số đoạn",
"ui.select": "Chọn",
"ui.selectOther": "Chọn đối tượng khác…",
"ui.selectTangentChain": "Chọn chuỗi tiếp tuyến",
diff --git a/assets/locales/zh-TW.json b/assets/locales/zh-TW.json
index c234ec743c..f05b6f0791 100644
--- a/assets/locales/zh-TW.json
+++ b/assets/locales/zh-TW.json
@@ -567,6 +567,7 @@
"Select edges": "選擇邊",
"Select points of the sketch being edited": "請選擇正在編輯的草圖中的點",
"Select the centre the pattern turns around first": "請先選擇陣列旋轉所繞的中心",
+ "Select the curves to divide first": "請先選擇要等分的曲線",
"Select the curves to offset first": "請先選擇要偏移的曲線",
"Select the mirror line": "請選擇鏡像線",
"Select the sketch curves or points to mirror first": "請先選擇要鏡像的草圖曲線或點",
@@ -1194,6 +1195,7 @@
"cmd.sketch_options": "草圖選項板選項",
"cmd.sketch_paste": "貼上草圖圖元",
"cmd.sketch_point3d": "3D點",
+ "cmd.sketch_point_divide": "等分曲線",
"cmd.sketch_polygon_circumscribed": "外切多邊形",
"cmd.sketch_polygon_edge": "邊長多邊形",
"cmd.sketch_polygon_inscribed": "內接多邊形",
@@ -1636,6 +1638,7 @@
"help.sketch.pattern.circular": "繞中心點複製草圖幾何,可繞整圓或按設定角度。用於螺栓圓、輻條和齒。",
"help.sketch.pattern.rectangular": "按設定間距以行和列複製草圖幾何。用於孔、槽或通風口的陣列。",
"help.sketch.point": "放置一個草圖點。用作尺寸、約束、孔心或後續特徵的參照。",
+ "help.sketch.point.divide": "放置將所選曲線分成等長段的點。這些點留在各曲線上,曲線改變時保持間距。",
"help.sketch.point3d": "開啟3D 草圖後,在空間中放置一個點。用作3D曲線和路徑的參照。",
"help.sketch.polygon.circumscribed": "在圓外繪製正多邊形,大小由中心到邊中點的距離決定。適用於已知對邊距的情況,例如六角螺母。",
"help.sketch.polygon.edge": "根據一條邊的兩個端點繪製正多邊形。適用於已知邊的長度和位置的情況。",
@@ -3902,6 +3905,7 @@
"sketch.dimension_applied": "已應用尺寸",
"sketch.dimension_applied_defined": "已應用尺寸;已定義參數 `{name}`",
"sketch.dimension_applied_renamed": "已應用尺寸;參數已命名為 `{name}`",
+ "sketch.divide_hint": "點將每條曲線分成等長的段,並在曲線改變時保持等分。",
"sketch.dof_left": "剩餘 {count} 個自由度",
"sketch.dof_left_one": "剩餘 {count} 個自由度",
"sketch.draw_curves": "繪製為 {linetype}",
@@ -4692,6 +4696,7 @@
"ui.heading_create_sketch": "創建草圖",
"ui.heading_cylinder": "圓柱體",
"ui.heading_design": "設計",
+ "ui.heading_divide_curve": "等分曲線",
"ui.heading_draft": "拔模",
"ui.heading_edit": "編輯",
"ui.heading_equation_curve": "方程曲線",
@@ -5030,6 +5035,7 @@
"ui.second_rail": "第二導軌",
"ui.section_analysis": "截面分析",
"ui.section_size": "截面尺寸",
+ "ui.segments": "段數",
"ui.select": "選擇",
"ui.selectOther": "選擇其他…",
"ui.selectTangentChain": "選擇相切鏈",
diff --git a/assets/locales/zh.json b/assets/locales/zh.json
index 0dc027e415..005e1839ad 100644
--- a/assets/locales/zh.json
+++ b/assets/locales/zh.json
@@ -731,6 +731,7 @@
"Select edges": "选择边",
"Select points of the sketch being edited": "请选择正在编辑的草图中的点",
"Select the centre the pattern turns around first": "请先选择阵列旋转所绕的中心",
+ "Select the curves to divide first": "请先选择要等分的曲线",
"Select the curves to offset first": "请先选择要偏移的曲线",
"Select the mirror line": "请选择镜像线",
"Select the sketch curves or points to mirror first": "请先选择要镜像的草图曲线或点",
@@ -1421,6 +1422,7 @@
"cmd.sketch_options": "草图选项板选项",
"cmd.sketch_paste": "粘贴草图图元",
"cmd.sketch_point3d": "三维点",
+ "cmd.sketch_point_divide": "等分曲线",
"cmd.sketch_polygon_circumscribed": "外切多边形",
"cmd.sketch_polygon_edge": "边长多边形",
"cmd.sketch_polygon_inscribed": "内接多边形",
@@ -1911,6 +1913,7 @@
"help.sketch.pattern.circular": "绕中心点复制草图几何,可绕整圆或按设定角度。用于螺栓圆、辐条和齿。",
"help.sketch.pattern.rectangular": "按设定间距以行和列复制草图几何。用于孔、槽或通风口的阵列。",
"help.sketch.point": "放置一个草图点。用作尺寸、约束、孔心或后续特征的参照。",
+ "help.sketch.point.divide": "放置将所选曲线分成等长段的点。这些点留在各曲线上,曲线改变时保持间距。",
"help.sketch.point3d": "开启3D 草图后,在空间中放置一个点。用作三维曲线和路径的参照。",
"help.sketch.polygon.circumscribed": "在圆外绘制正多边形,大小由中心到边中点的距离决定。适用于已知对边距的情况,例如六角螺母。",
"help.sketch.polygon.edge": "根据一条边的两个端点绘制正多边形。适用于已知边的长度和位置的情况。",
@@ -4587,6 +4590,7 @@
"sketch.dimension_applied": "已应用尺寸",
"sketch.dimension_applied_defined": "已应用尺寸;已定义参数 `{name}`",
"sketch.dimension_applied_renamed": "已应用尺寸;参数已命名为 `{name}`",
+ "sketch.divide_hint": "点将每条曲线分成等长的段,并在曲线改变时保持等分。",
"sketch.dof_left": "剩余 {count} 个自由度",
"sketch.dof_left_one": "剩余 {count} 个自由度",
"sketch.draw_curves": "绘制为 {linetype}",
@@ -5477,6 +5481,7 @@
"ui.heading_custom_view_navigator": "自定义视图导航器",
"ui.heading_cylinder": "圆柱体",
"ui.heading_design": "设计",
+ "ui.heading_divide_curve": "等分曲线",
"ui.heading_draft": "拔模",
"ui.heading_edit": "编辑",
"ui.heading_equation_curve": "方程曲线",
@@ -5893,6 +5898,7 @@
"ui.second_rail": "第二导轨",
"ui.section_analysis": "截面分析",
"ui.section_size": "截面尺寸",
+ "ui.segments": "段数",
"ui.select": "选择",
"ui.selectOther": "选择其他…",
"ui.selectTangentChain": "选择相切链",
diff --git a/docs/features.md b/docs/features.md
index 771d586488..b256c4d4ac 100644
--- a/docs/features.md
+++ b/docs/features.md
@@ -100,6 +100,7 @@ SolidCraft's commands by area, generated by `cargo xtask features` from the comm
| Circular Pattern | `sketch.pattern.circular` | SKETCH › PATTERN |
| Rectangular Pattern | `sketch.pattern.rectangular` | SKETCH › PATTERN |
| Point | `sketch.point` | SKETCH › CREATE |
+| Divide Curve | `sketch.point.divide` | SKETCH › CREATE |
| 3D Point | `sketch.point3d` | – |
| Circumscribed Polygon | `sketch.polygon.circumscribed` | SKETCH › CREATE |
| Edge Polygon | `sketch.polygon.edge` | SKETCH › CREATE |