SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Regenerate generated files and fold pending files [skip ci]
github-actions[bot]cda0277c3e67
diff --git a/ATTRIBUTION.md b/ATTRIBUTION.mdindex 71fad90a87..a53a01105e 100644--- a/ATTRIBUTION.md+++ b/ATTRIBUTION.md@@ -630,6 +630,7 @@ Original SolidCraft drawings, Open for owner review; no runtime assignments.| docs/book/src/generated/equation-wave.png | SolidCraft contributors | rendered by `cargo xtask book` (`solidcraft-cli snapshot docs/book/scripts/equation-wave.json`; gitignored) | MIT OR Apache-2.0 || assets/icons/ui/design/svg/model/print_face.svg | SolidCraft contributors | two-tone modelling icon master (64 grid), original SolidCraft artwork | MIT OR Apache-2.0 || assets/locales/fi.json | SolidCraft contributors | Original Finnish translation of SolidCraft's English catalog, AI-assisted (Claude Code) clean-room from the English and not yet reviewed line by line by a native speaker; no commercial CAD text used | MIT OR Apache-2.0 |+| assets/icons/ui/design/svg/model/plane_axis_point.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |## Code adapted from sibling projectsdiff --git a/assets/locales/ar.json b/assets/locales/ar.jsonindex dc4bb89ef4..06fa18f143 100644--- a/assets/locales/ar.json+++ b/assets/locales/ar.json@@ -885,6 +885,7 @@"cmd.config_rule": "قاعدة التكوين","cmd.config_rules": "قواعد التكوين","cmd.config_table": "عرض جدول التكوينات",+ "cmd.construct.plane.axis_point": "مستوى عبر محور ونقطة","cmd.construct_axis_edge": "محور عبر حافة","cmd.construct_axis_normal_to_face": "محور عمودي على وجه","cmd.construct_axis_through_cylinder": "محور عبر أسطوانة/مخروط/طارة",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "ينشئ محورًا إنشائيًا يمر بنقطتين أو رأسين أو نقطتي رسم. استخدمه لمحور يمتد بين موضعين معروفين.","help.construct.plane.along_path": "ينشئ مستوى إنشائيًا عموديًا على حافة أو منحنى عند موضع على امتداده. استخدمه لرسم مقطع من أجل كنس أو لمقطع عرضي للمسار.","help.construct.plane.at_angle": "ينشئ مستوى إنشائيًا مائلًا بزاوية عن مستوى أو وجه، حول محور أو حافة. استخدمه للرسوم المائلة، مثل حامل مائل.",+ "help.construct.plane.axis_point": "ينشئ مستوى إنشاء يحتوي على محور ونقطة خارجه. اختر محور الأصل أو محور إنشاء أو حافة مستقيمة أو خط رسم، ثم رأسًا أو نقطة رسم أو نقطة إنشاء. لا تحدد نقطة على المحور مستوى فريدًا.","help.construct.plane.midplane": "ينشئ مستوى إنشائيًا في منتصف المسافة بين مستويين أو وجهين مسطحين، أو منصّفًا لهما حيث يلتقيان بزاوية. استخدمه كمستوى تناظر عند عمل مرآة.","help.construct.plane.offset": "ينشئ مستوى إنشائيًا موازيًا لمستوى أو وجه مسطح، على مسافة محددة أو عبر نقطة. استخدمه للرسم على ارتفاع محدد فوق وجه.","help.construct.plane.perpendicular": "ينشئ مستوى إنشائيًا يحوي خطًا أو حافة ويكون عموديًا على مستوى أو وجه. استخدمه للرسم بشكل رأسي على النموذج على امتداد حافة.",diff --git a/assets/locales/de.json b/assets/locales/de.jsonindex f5f42cec21..1b9e895651 100644--- a/assets/locales/de.json+++ b/assets/locales/de.json@@ -885,6 +885,7 @@"cmd.config_rule": "Konfigurationsregel","cmd.config_rules": "Konfigurationsregeln","cmd.config_table": "Konfigurationstabelle anzeigen",+ "cmd.construct.plane.axis_point": "Ebene durch Achse und Punkt","cmd.construct_axis_edge": "Achse durch Kante","cmd.construct_axis_normal_to_face": "Achse senkrecht zur Fläche","cmd.construct_axis_through_cylinder": "Achse durch Zylinder/Kegel/Torus",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "Erzeugt eine Konstruktionsachse durch zwei Punkte, Eckpunkte oder Skizzenpunkte. Für eine Achse zwischen zwei bekannten Lagen.","help.construct.plane.along_path": "Erzeugt eine Konstruktionsebene senkrecht zu einer Kante oder Kurve, an einer Stelle entlang dieser. Damit skizzieren Sie ein Profil für eine Austragung oder einen Querschnitt eines Pfads.","help.construct.plane.at_angle": "Erzeugt eine Konstruktionsebene, die gegenüber einer Ebene oder Fläche um eine Achse oder Kante gedreht ist. Für schräge Skizzen, etwa eines Winkelhalters.",+ "help.construct.plane.axis_point": "Erstellt eine Konstruktionsebene durch eine Achse und einen Punkt außerhalb der Achse. Zuerst eine Ursprungs- oder Konstruktionsachse, gerade Kante oder Skizzenlinie wählen, dann einen Eckpunkt, Skizzenpunkt oder Konstruktionspunkt. Ein Punkt auf der Achse legt keine eindeutige Ebene fest.","help.construct.plane.midplane": "Erzeugt eine Konstruktionsebene mittig zwischen zwei Ebenen oder ebenen Flächen oder als Winkelhalbierende, wo sie schräg zueinander stehen. Als Symmetrieebene zum Spiegeln.","help.construct.plane.offset": "Erzeugt eine Konstruktionsebene parallel zu einer Ebene oder ebenen Fläche, in einem Abstand oder durch einen Punkt. Damit skizzieren Sie in fester Höhe über einer Fläche.","help.construct.plane.perpendicular": "Erzeugt eine Konstruktionsebene, die eine Linie oder Kante enthält und senkrecht auf einer Ebene oder Fläche steht. Damit skizzieren Sie aufrecht entlang einer Kante am Modell.",diff --git a/assets/locales/en.json b/assets/locales/en.jsonindex fb1c10e394..de96d2fe60 100644--- a/assets/locales/en.json+++ b/assets/locales/en.json@@ -885,6 +885,7 @@"cmd.config_rule": "Configuration Rule","cmd.config_rules": "Configuration Rules","cmd.config_table": "Display Configuration Table",+ "cmd.construct.plane.axis_point": "Plane Through Axis And Point","cmd.construct_axis_edge": "Axis Through Edge","cmd.construct_axis_normal_to_face": "Axis Perpendicular To Face","cmd.construct_axis_through_cylinder": "Axis Through Cylinder/Cone/Torus",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "Creates a construction axis through two points, vertices or sketch points. Use it for an axis that runs between two known positions.","help.construct.plane.along_path": "Creates a construction plane square to an edge or curve, at a position along it. Use it to sketch a profile for a sweep or a section of a path.","help.construct.plane.at_angle": "Creates a construction plane turned by an angle from a plane or face, about an axis or edge. Use it for sloped sketches, such as an angled bracket.",+ "help.construct.plane.axis_point": "Creates a construction plane containing an axis and a point off that axis. Pick an origin or construction axis, a straight edge or sketch line, then a vertex, sketch point or construction point. A point on the axis cannot define a unique plane.","help.construct.plane.midplane": "Creates a construction plane halfway between two planes or flat faces, or bisecting them where they meet at an angle. Use it as a symmetry plane for mirroring.","help.construct.plane.offset": "Creates a construction plane parallel to a plane or flat face, at a distance or through a point. Use it to sketch at a set height above a face.","help.construct.plane.perpendicular": "Creates a construction plane that holds a line or edge and stands square to a plane or face. Use it to sketch upright on a model along an edge.",diff --git a/assets/locales/he.json b/assets/locales/he.jsonindex dd672950c7..b80681e14e 100644--- a/assets/locales/he.json+++ b/assets/locales/he.json@@ -885,6 +885,7 @@"cmd.config_rule": "כלל תצורה","cmd.config_rules": "כללי תצורה","cmd.config_table": "הצגת טבלת תצורות",+ "cmd.construct.plane.axis_point": "מישור דרך ציר ונקודה","cmd.construct_axis_edge": "ציר דרך מקצוע","cmd.construct_axis_normal_to_face": "ציר ניצב לפאה","cmd.construct_axis_through_cylinder": "ציר דרך גליל/חרוט/טורוס",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "יצירת ציר עזר דרך שתי נקודות, קודקודים או נקודות סקיצה. מתאים לציר שעובר בין שני מיקומים ידועים.","help.construct.plane.along_path": "יצירת מישור עזר ניצב למקצוע או לעקומה, במיקום לאורכם. משמש לשרטוט פרופיל לסחיפה או חתך של מסלול.","help.construct.plane.at_angle": "יצירת מישור עזר מוטה בזווית ממישור או מפאה, סביב ציר או מקצוע. מתאים לסקיצות משופעות, כמו תמוכה בזווית.",+ "help.construct.plane.axis_point": "יוצר מישור עזר המכיל ציר ונקודה שאינה עליו. יש לבחור ציר ראשי או ציר עזר, קצה ישר או קו סקיצה, ואז קודקוד, נקודת סקיצה או נקודת עזר. נקודה על הציר אינה מגדירה מישור יחיד.","help.construct.plane.midplane": "יצירת מישור עזר באמצע בין שני מישורים או פאות שטוחות, או חוצה אותם במקום שבו הם נפגשים בזווית. משמש כמישור סימטריה לשיקוף.","help.construct.plane.offset": "יצירת מישור עזר מקביל למישור או לפאה שטוחה, במרחק נתון או דרך נקודה. מתאים לשרטוט בגובה קבוע מעל פאה.","help.construct.plane.perpendicular": "יצירת מישור עזר שמכיל קו או מקצוע וניצב למישור או לפאה. מתאים לשרטוט זקוף על המודל לאורך מקצוע.",diff --git a/assets/locales/ja.json b/assets/locales/ja.jsonindex 6ce84bb6b5..88bbdb5674 100644--- a/assets/locales/ja.json+++ b/assets/locales/ja.json@@ -885,6 +885,7 @@"cmd.config_rule": "構成ルール","cmd.config_rules": "構成ルール一覧","cmd.config_table": "構成テーブルを表示",+ "cmd.construct.plane.axis_point": "軸と点を通る平面","cmd.construct_axis_edge": "エッジを通る軸","cmd.construct_axis_normal_to_face": "面に垂直な軸","cmd.construct_axis_through_cylinder": "円柱/円錐/トーラスを通る軸",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "2つの点、頂点、スケッチ点を通る構築軸を作ります。位置が分かっている2か所の間を通る軸に使います。","help.construct.plane.along_path": "エッジまたは曲線に垂直な構築平面を、その上の指定位置に作ります。スイープ用のプロファイルや、パスの断面をスケッチするときに使います。","help.construct.plane.at_angle": "平面または面を、軸またはエッジを中心に指定した角度だけ傾けた構築平面を作ります。斜めのブラケットなど、傾いたスケッチに使います。",+ "help.construct.plane.axis_point": "軸と、その軸上にない点を含む構築平面を作成します。原点軸、構築軸、直線エッジまたはスケッチの直線を選択し、次に頂点、スケッチ点または構築点を選択します。軸上の点では平面が一意に定まりません。","help.construct.plane.midplane": "2つの平面または平らな面の中間、または角度をなして交わる場合はその二等分に構築平面を作ります。ミラーの対称面として使います。","help.construct.plane.offset": "平面または平らな面に平行な構築平面を、指定した距離または点を通る位置に作ります。面から一定の高さの位置にスケッチするときに使います。","help.construct.plane.perpendicular": "線またはエッジを含み、平面または面に垂直な構築平面を作ります。エッジに沿ってモデル上に垂直にスケッチするときに使います。",diff --git a/assets/locales/ko.json b/assets/locales/ko.jsonindex a957c42d1e..1e11e75dc8 100644--- a/assets/locales/ko.json+++ b/assets/locales/ko.json@@ -758,6 +758,7 @@"cmd.config_rule": "구성 규칙","cmd.config_rules": "구성 규칙","cmd.config_table": "구성 표시",+ "cmd.construct.plane.axis_point": "축과 점을 지나는 평면","cmd.construct_axis_edge": "모서리를 통과하는 축","cmd.construct_axis_normal_to_face": "면에 수직인 축","cmd.construct_axis_through_cylinder": "원기둥/원뿔/토러스를 통과하는 축",@@ -1207,6 +1208,7 @@"help.attributions": "저작자 표시 (ATTRIBUTION.md)","help.build": "버전 {version} · 커밋 {commit} · 빌드 날짜 {date}","help.component.finish_edit": "제자리에서 편집 중인 부품을 저장하고 어셈블리로 돌아가 그 부품으로 어셈블리를 업데이트합니다. 연결된 부품의 변경을 마쳤을 때 사용하세요.",+ "help.construct.plane.axis_point": "축과 축 위에 있지 않은 점을 포함하는 구성 평면을 만듭니다. 원점 축, 구성 축, 직선 모서리 또는 스케치 직선을 선택한 다음 꼭짓점, 스케치 점 또는 구성점을 선택합니다. 축 위의 점으로는 평면을 하나로 결정할 수 없습니다.","help.font_details": "인터페이스는 egui의 내장 글꼴을 사용합니다(Ubuntu Font Licence 및 MIT/Bitstream Vera 라이선스의 Ubuntu Light와 Hack, OFL 및 MIT의 Noto Emoji와 이모지 아이콘 글꼴). 스케치 텍스트는 Liberation Sans(SIL OFL 1.1)를 사용합니다. The Crafting Apps의 선택적 글꼴 팩 craft-fonts(BIZ UDPGothic, Shippori Mincho, BIZ UDMincho, Noto Sans CJK SC, Noto Sans Arabic; SIL OFL 1.1)는 SolidCraft 빌드에 포함되지 않습니다.","help.fonts": "글꼴","help.licences": "라이선스",diff --git a/assets/locales/pending/plane-axis-point.json b/assets/locales/pending/plane-axis-point.jsondeleted file mode 100644index 82b264cf66..0000000000--- a/assets/locales/pending/plane-axis-point.json+++ /dev/null@@ -1,34 +0,0 @@-{- "en": {- "cmd.construct.plane.axis_point": "Plane Through Axis And Point",- "help.construct.plane.axis_point": "Creates a construction plane containing an axis and a point off that axis. Pick an origin or construction axis, a straight edge or sketch line, then a vertex, sketch point or construction point. A point on the axis cannot define a unique plane."- },- "ar": {- "cmd.construct.plane.axis_point": "مستوى عبر محور ونقطة",- "help.construct.plane.axis_point": "ينشئ مستوى إنشاء يحتوي على محور ونقطة خارجه. اختر محور الأصل أو محور إنشاء أو حافة مستقيمة أو خط رسم، ثم رأسًا أو نقطة رسم أو نقطة إنشاء. لا تحدد نقطة على المحور مستوى فريدًا."- },- "he": {- "cmd.construct.plane.axis_point": "מישור דרך ציר ונקודה",- "help.construct.plane.axis_point": "יוצר מישור עזר המכיל ציר ונקודה שאינה עליו. יש לבחור ציר ראשי או ציר עזר, קצה ישר או קו סקיצה, ואז קודקוד, נקודת סקיצה או נקודת עזר. נקודה על הציר אינה מגדירה מישור יחיד."- },- "ja": {- "cmd.construct.plane.axis_point": "軸と点を通る平面",- "help.construct.plane.axis_point": "軸と、その軸上にない点を含む構築平面を作成します。原点軸、構築軸、直線エッジまたはスケッチの直線を選択し、次に頂点、スケッチ点または構築点を選択します。軸上の点では平面が一意に定まりません。"- },- "vi": {- "cmd.construct.plane.axis_point": "Mặt phẳng qua trục và điểm",- "help.construct.plane.axis_point": "Tạo mặt phẳng dựng chứa một trục và một điểm nằm ngoài trục đó. Chọn trục gốc, trục dựng, cạnh thẳng hoặc đường thẳng phác thảo, rồi chọn đỉnh, điểm phác thảo hoặc điểm dựng. Điểm nằm trên trục không xác định được một mặt phẳng duy nhất."- },- "zh": {- "cmd.construct.plane.axis_point": "通过轴和点的平面",- "help.construct.plane.axis_point": "创建包含一条轴和一个轴外点的构造平面。先选择原点轴、构造轴、直边或草图直线,再选择顶点、草图点或构造点。轴上的点无法确定唯一的平面。"- },- "de": {- "cmd.construct.plane.axis_point": "Ebene durch Achse und Punkt",- "help.construct.plane.axis_point": "Erstellt eine Konstruktionsebene durch eine Achse und einen Punkt außerhalb der Achse. Zuerst eine Ursprungs- oder Konstruktionsachse, gerade Kante oder Skizzenlinie wählen, dann einen Eckpunkt, Skizzenpunkt oder Konstruktionspunkt. Ein Punkt auf der Achse legt keine eindeutige Ebene fest."- },- "ko": {- "cmd.construct.plane.axis_point": "축과 점을 지나는 평면",- "help.construct.plane.axis_point": "축과 축 위에 있지 않은 점을 포함하는 구성 평면을 만듭니다. 원점 축, 구성 축, 직선 모서리 또는 스케치 직선을 선택한 다음 꼭짓점, 스케치 점 또는 구성점을 선택합니다. 축 위의 점으로는 평면을 하나로 결정할 수 없습니다."- }-}diff --git a/assets/locales/vi.json b/assets/locales/vi.jsonindex b0e2f8a0d2..54f8243981 100644--- a/assets/locales/vi.json+++ b/assets/locales/vi.json@@ -885,6 +885,7 @@"cmd.config_rule": "Quy tắc cấu hình","cmd.config_rules": "Danh sách quy tắc cấu hình","cmd.config_table": "Hiển thị bảng cấu hình",+ "cmd.construct.plane.axis_point": "Mặt phẳng qua trục và điểm","cmd.construct_axis_edge": "Trục đi qua cạnh","cmd.construct_axis_normal_to_face": "Trục vuông góc với bề mặt","cmd.construct_axis_through_cylinder": "Trục qua hình trụ/nón/xuyến",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "Tạo trục dựng hình đi qua hai điểm, đỉnh hoặc điểm phác thảo. Dùng cho trục chạy giữa hai vị trí đã biết.","help.construct.plane.along_path": "Tạo mặt phẳng dựng hình vuông góc với một cạnh hoặc đường cong, tại một vị trí dọc theo nó. Dùng để phác thảo biên dạng cho Quét theo đường dẫn hoặc mặt cắt của đường dẫn.","help.construct.plane.at_angle": "Tạo mặt phẳng dựng hình xoay một góc so với mặt phẳng hoặc mặt, quanh một trục hoặc cạnh. Dùng cho phác thảo nghiêng, chẳng hạn giá đỡ vát góc.",+ "help.construct.plane.axis_point": "Tạo mặt phẳng dựng chứa một trục và một điểm nằm ngoài trục đó. Chọn trục gốc, trục dựng, cạnh thẳng hoặc đường thẳng phác thảo, rồi chọn đỉnh, điểm phác thảo hoặc điểm dựng. Điểm nằm trên trục không xác định được một mặt phẳng duy nhất.","help.construct.plane.midplane": "Tạo mặt phẳng dựng hình nằm giữa hai mặt phẳng, hoặc phân giác của chúng nơi chúng giao nhau theo một góc. Dùng làm mặt phẳng đối xứng khi Lấy đối xứng.","help.construct.plane.offset": "Tạo mặt phẳng dựng hình song song với một mặt phẳng, cách một khoảng hoặc đi qua một điểm. Dùng để phác thảo ở độ cao xác định phía trên một mặt.","help.construct.plane.perpendicular": "Tạo mặt phẳng dựng hình chứa một đường hoặc cạnh và vuông góc với một mặt phẳng hoặc mặt. Dùng để phác thảo thẳng đứng trên mô hình dọc theo một cạnh.",diff --git a/assets/locales/zh.json b/assets/locales/zh.jsonindex e4ebfdf79e..73cb17d7c0 100644--- a/assets/locales/zh.json+++ b/assets/locales/zh.json@@ -885,6 +885,7 @@"cmd.config_rule": "配置规则","cmd.config_rules": "配置规则","cmd.config_table": "显示配置表",+ "cmd.construct.plane.axis_point": "通过轴和点的平面","cmd.construct_axis_edge": "过边的轴","cmd.construct_axis_normal_to_face": "垂直于面的轴","cmd.construct_axis_through_cylinder": "过圆柱/圆锥/圆环的轴",@@ -1435,6 +1436,7 @@"help.construct.axis.two_points": "通过两个点、顶点或草图点创建构造轴。用于连接两个已知位置的轴。","help.construct.plane.along_path": "在边或曲线上的指定位置创建垂直于它的构造平面。用于为扫掠绘制轮廓,或绘制路径的截面。","help.construct.plane.at_angle": "创建一个由平面或面绕轴或边旋转一定角度而成的构造平面。用于倾斜的草图,例如斜支架。",+ "help.construct.plane.axis_point": "创建包含一条轴和一个轴外点的构造平面。先选择原点轴、构造轴、直边或草图直线,再选择顶点、草图点或构造点。轴上的点无法确定唯一的平面。","help.construct.plane.midplane": "在两个平面或平整面的正中间创建构造平面;若二者成角相交,则取其角平分面。用作镜像的对称面。","help.construct.plane.offset": "创建与平面或平整面平行的构造平面,按距离或过某点确定。用于在面上方指定高度处绘制草图。","help.construct.plane.perpendicular": "创建一个包含某直线或边、并垂直于某平面或面的构造平面。用于沿边在模型上垂直地绘制草图。",diff --git a/attribution/pending/plane-axis-point.md b/attribution/pending/plane-axis-point.mddeleted file mode 100644index a1015d2d04..0000000000--- a/attribution/pending/plane-axis-point.md+++ /dev/null@@ -1 +0,0 @@-| assets/icons/ui/design/svg/model/plane_axis_point.svg | SolidCraft contributors | original icon master (64 grid) | MIT OR Apache-2.0 |diff --git a/docs/features.md b/docs/features.mdindex cdea0b4f54..18dc62f180 100644--- a/docs/features.md+++ b/docs/features.md@@ -208,6 +208,7 @@ SolidCraft's commands by area, generated by `cargo xtask features` from the comm| Axis Through Two Points | `construct.axis.two_points` | SOLID › CONSTRUCT || Plane Along Path | `construct.plane.along_path` | SOLID › CONSTRUCT || Plane at Angle | `construct.plane.at_angle` | SOLID › CONSTRUCT |+| Plane Through Axis And Point | `construct.plane.axis_point` | SOLID › CONSTRUCT || Midplane | `construct.plane.midplane` | SOLID › CONSTRUCT || Offset Plane | `construct.plane.offset` | SOLID › CONSTRUCT || Perpendicular Plane | `construct.plane.perpendicular` | SOLID › CONSTRUCT |