SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 250/509: kernel-cases: the ladder's golden recorded after the thread rework (and 1 more)
jyvikod94ed7adb912
diff --git a/crates/geom/src/tess.rs b/crates/geom/src/tess.rsindex c2d64c8bb6..941d184770 100644--- a/crates/geom/src/tess.rs+++ b/crates/geom/src/tess.rs@@ -249,10 +249,15 @@ impl EvalSurface {if let Some(n) = n.normalized().filter(|_| n.len2() > 1e-20 * (du.len2() * dv.len2()).max(1e-300)) {return (p, n);}- // Step into the parameter domain around the degenerate point.+ // Step into the parameter domain around the degenerate point: never past the end of an+ // interval, where the extrapolated surface folds back over the pole and its normal+ // points the other way.let h = 1e-6 * (1.0 + u.abs().max(v.abs()));+ let inside = |d: usize, t: f64, s: f64| self.interval(d).is_none_or(|(lo, hi)| (lo..=hi).contains(&(t + s * h)));for (su, sv) in [(1.0, 1.0), (-1.0, 1.0), (1.0, -1.0), (-1.0, -1.0)] {- if let Some((_, a, b)) = self.derivs(u + su * h, v + sv * h)+ if inside(0, u, su)+ && inside(1, v, sv)+ && let Some((_, a, b)) = self.derivs(u + su * h, v + sv * h)&& let Some(n) = self.oriented(a.cross(b)).normalized(){return (p, n);@@ -261,6 +266,20 @@ impl EvalSurface {(p, Vec3::Z)}+ /// The active parameter interval along `d` (0: u, 1: v) of a spline, or of a revolution's+ /// profile; `None` where the parameter is unbounded (a plane, a revolution's angle).+ fn interval(&self, d: usize) -> Option<(f64, f64)> {+ match self {+ EvalSurface::Plane { .. } => None,+ EvalSurface::Nurbs { degree, knots, count, .. } => {+ Some((*knots.get(d)?.get(*degree.get(d)?)?, *knots.get(d)?.get(*count.get(d)?)?))+ }+ EvalSurface::Revolved { profile, swap, .. } => (d == usize::from(*swap))+ .then(|| Some((*profile.knots.get(profile.degree)?, *profile.knots.get(profile.ctrl.len())?)))+ .flatten(),+ }+ }+/// Mirror transforms reverse the cross product of the mapped derivatives.fn oriented(&self, n: Vec3) -> Vec3 {match self {@@ -276,7 +295,7 @@ impl EvalSurface {pub fn wrap(&self, uv: [f64; 2]) -> [f64; 2] {if let EvalSurface::Revolved { profile, swap, .. } = self {let d = usize::from(*swap);- let range = (|| Some((*profile.knots.get(profile.degree)?, *profile.knots.get(profile.ctrl.len())?)))();+ let range = self.interval(d);let mut out = uv;if let (Some(r), Some(x)) = (range, out.get_mut(d))&& !(r.0..=r.1).contains(x)@@ -286,11 +305,10 @@ impl EvalSurface {}return out;}- let EvalSurface::Nurbs { degree, knots, count, closed, .. } = self else { return uv };- let range = |d: usize| Some((*knots.get(d)?.get(*degree.get(d)?)?, *knots.get(d)?.get(*count.get(d)?)?));+ let EvalSurface::Nurbs { closed, .. } = self else { return uv };let mut out = uv;for d in 0..2 {- if let (true, Some(r)) = (closed[d], range(d))+ if let (true, Some(r)) = (closed[d], self.interval(d))&& !(r.0..=r.1).contains(&uv[d]){out[d] = uv::wrap_into(uv[d], r);@@ -639,8 +657,10 @@ mod tests {let (u, v) = (i as f64 / 10.0, j as f64);let (p, n) = s.eval(u, v);assert!((p.len() - 3.0).abs() < 1e-12, "{p:?}");- // At the pole (u = 1) the normal comes from a step inside: within ~1e-6 rad.- assert!(n.cross(p).len() < 3e-5, "normal {n:?} not radial at {p:?}");+ // S_u × S_v points into this sphere. At the pole (u = 1) the normal comes from+ // a step inside: within ~1e-6 rad, and the same way (a step past the pole would+ // turn it over).+ assert!(n.cross(p).len() < 3e-5 && n.dot(p) < 0.0, "normal {n:?} not inward at {p:?}");}}}diff --git a/docs/kernel-ladder.md b/docs/kernel-ladder.mdindex b1e48ec810..8aa48e3a04 100644--- a/docs/kernel-ladder.md+++ b/docs/kernel-ladder.md@@ -13,7 +13,7 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail,| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – || 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – || 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – |-| 06-threads | modelled threads | 10 | 8 pass, 2 unsupported | – |+| 06-threads | modelled threads | 17 | 17 pass | – || 07-fillets | constant, variable and corner fillets | 17 | 1 fail, 14 pass, 2 unsupported | 016-corner-three-sequential-r5-r3-r7 || 08-chamfers | chamfers | 8 | 8 pass | – || 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – |@@ -28,131 +28,138 @@ Times are the commands' own, in seconds, from the case's process; **golden** is| Case | What | Answer | Result | s | golden s | changes ||---|---|---|---|---|---|---|-| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.002 | 0.002 | |-| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | |-| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.014 | 0.014 | |+| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.003 | 0.003 | |+| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.003 | 0.003 | || ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.016 | 0.016 | |-| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.028 | 0.028 | |-| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.463 | 0.463 | |+| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.017 | 0.017 | |+| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.025 | 0.025 | |+| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.496 | 0.496 | || ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.006 | 0.006 | |-| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | 0.007 | |-| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | |+| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.006 | 0.006 | |+| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.007 | 0.007 | || ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | || ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | |-| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | |+| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.013 | 0.013 | || ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | || ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.013 | 0.013 | |-| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | |-| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.016 | 0.016 | |+| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.014 | 0.014 | |+| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.015 | 0.015 | |+| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.015 | 0.015 | || ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.016 | 0.016 | |-| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.019 | 0.019 | |+| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.018 | 0.018 | || ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | |-| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.026 | 0.026 | |-| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | |-| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.030 | 0.030 | |-| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.035 | 0.035 | |+| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.023 | 0.023 | |+| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.027 | 0.027 | |+| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.027 | 0.027 | |+| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.028 | 0.028 | || ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | |-| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.039 | 0.039 | |-| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.043 | 0.043 | |+| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.042 | 0.042 | || ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.060 | 0.060 | || ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.067 | 0.067 | |-| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.108 | 0.108 | |-| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.176 | 0.176 | |-| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.036 | 1.036 | |+| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.111 | 0.111 | |+| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.185 | 0.185 | |+| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.053 | 1.053 | |+| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.007 | 0.007 | |+| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.009 | 0.009 | || ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.009 | 0.009 | |-| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.012 | 0.012 | |-| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.014 | 0.014 | |-| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.016 | 0.016 | |+| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.016 | 0.016 | |+| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.028 | 0.028 | || ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.033 | 0.033 | || ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.034 | 0.034 | |-| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.039 | 0.039 | |-| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.065 | 0.065 | |-| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.072 | 0.072 | |-| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.074 | 0.074 | |-| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.008 | 0.008 | |-| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.009 | 0.009 | |-| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.014 | 0.014 | |+| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.060 | 0.060 | |+| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.066 | 0.066 | |+| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.079 | 0.079 | |+| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.010 | 0.010 | |+| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.015 | 0.015 | |+| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.021 | 0.021 | || ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.029 | 0.029 | |-| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.031 | 0.031 | |-| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.037 | 0.037 | |+| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.035 | 0.035 | || ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.039 | 0.039 | |-| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.079 | 0.079 | |-| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.081 | 0.081 | |-| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.095 | 0.095 | |-| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.499 | 0.499 | |-| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.130 | 1.130 | |-| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | |-| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.018 | 0.018 | |+| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.043 | 0.043 | |+| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.081 | 0.081 | |+| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.086 | 0.086 | |+| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.106 | 0.106 | |+| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.475 | 0.475 | |+| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.126 | 1.126 | |+| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.018 | 0.018 | |+| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.018 | 0.018 | |+| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.019 | 0.019 | || ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.019 | 0.019 | || ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.023 | 0.023 | |-| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.024 | 0.024 | |+| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.023 | 0.023 | || ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.025 | 0.025 | |-| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.030 | 0.030 | || ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | |+| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.053 | 0.053 | |+| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.061 | 0.061 | || ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.061 | 0.061 | |-| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.064 | 0.064 | |-| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.068 | 0.068 | |-| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.072 | 0.072 | |-| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.235 | 0.235 | |-| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 0.622 | 0.622 | |-| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.660 | 0.660 | |-| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 0.726 | 0.726 | |-| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 1.219 | 1.219 | |-| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 1.231 | 1.231 | |-| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.337 | 1.337 | |-| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.390 | 1.390 | |-| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.362 | 2.362 | |-| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) | invariants | not supported yet: solid.thread has no start count: multi-start threads | – | – | |-| ladder/06-threads/009-thread-runout-length | an M10 thread that vanishes over a 2-pitch runout before a shoulder | invariants | not supported yet: solid.thread has no runout (vanishing thread) length | – | – | |-| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | |+| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.082 | 0.082 | |+| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.222 | 0.222 | |+| ladder/06-threads/012-external-acme-3-4-6 | a modelled 3/4-6 ACME thread (ASME B1.5, general purpose) on a 3/4 in shaft, six turns | analytic | pass | 0.579 | 0.579 | |+| ladder/06-threads/013-external-s20x4 | a modelled metric buttress S20x4 thread (DIN 513, 3/30 deg) on a d20 shaft, six turns | analytic | pass | 0.597 | 0.597 | |+| ladder/06-threads/011-external-tr20x4 | a modelled trapezoidal Tr20x4 thread (ISO 2904) on a d20 shaft, six turns | analytic | pass | 0.612 | 0.612 | |+| ladder/06-threads/015-internal-tr20x4-nut | a modelled internal Tr20x4 thread in a d16 (D1 = d - P) bore through a 40x40x24 block | analytic | pass | 0.615 | 0.615 | |+| ladder/06-threads/014-external-buttress-asme-1.5-8 | a modelled 1.5-8 buttress thread (ASME B1.9 basic profile, 7/45 deg) on a 1.5 in shaft, six turns | analytic | pass | 0.673 | 0.673 | |+| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.701 | 0.701 | |+| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm from the top end (`from`): it stops square in the middle of the face | analytic | pass | 0.827 | 0.827 | |+| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.107 | 1.107 | |+| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet: it stops clear of the fillet | analytic | pass | 1.364 | 1.364 | |+| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder: it stops clear of it, the collar whole | analytic | pass | 1.367 | 1.367 | |+| ladder/06-threads/009-thread-runout-length | 004's M10 thread run from the free top end, vanishing over a 3 mm (2 P) runout before the d16 shoulder | analytic | pass | 1.432 | 1.432 | |+| ladder/06-threads/016-external-m10-left-hand | 001's modelled M10 thread, left-handed: the same volume, turning the other way | analytic | pass | 1.564 | 1.564 | |+| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.637 | 1.637 | |+| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.652 | 1.652 | |+| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.412 | 2.412 | |+| ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) over a d10 x 30 cylinder | analytic | pass | 3.155 | 3.155 | |+| ladder/06-threads/017-external-m10-chamfered-tip | 001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove | analytic | pass | 3.245 | 3.245 | |+| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.005 | 0.005 | |+| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.007 | 0.007 | || ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.007 | 0.007 | || ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | || ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.010 | 0.010 | || ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.011 | 0.011 | |+| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.011 | 0.011 | || ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.012 | 0.012 | |-| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | 0.012 | || ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.014 | 0.014 | |-| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | |-| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.019 | 0.019 | |-| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.020 | 0.020 | |+| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.019 | 0.019 | || ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) | 0.026 | 0.026 | |-| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.030 | 0.030 | |-| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |+| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.029 | 0.029 | |+| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.031 | 0.031 | |+| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | || ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.044 | 0.044 | |-| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.389 | 0.389 | |+| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.405 | 0.405 | || ladder/07-fillets/013-corner-setback | three r5 rounds at a corner with setbacks of 8 mm along each edge | invariants | not supported yet: solid.fillet has no corner setback distances | – | – | |+| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.006 | 0.006 | || ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.006 | 0.006 | |-| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.007 | 0.007 | || ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | |-| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.010 | 0.010 | || ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | |+| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.018 | 0.018 | || ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.027 | 0.027 | |-| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |-| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.519 | 0.519 | |-| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.009 | 0.009 | |-| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | |-| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | |+| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.039 | 0.039 | |+| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.514 | 0.514 | |+| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | 0.016 | |+| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.017 | 0.017 | |+| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.017 | 0.017 | || ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |-| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | |+| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.017 | 0.017 | || ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.031 | 0.031 | || ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.040 | 0.040 | |-| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.042 | 0.042 | |-| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.054 | 0.054 | |-| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.090 | 0.090 | |-| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.090 | 0.090 | |-| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.098 | 0.098 | |-| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.123 | 0.123 | |-| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.692 | 0.692 | |-| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.868 | 0.868 | |+| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.043 | 0.043 | |+| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.066 | 0.066 | |+| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.094 | 0.094 | |+| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.095 | 0.095 | |+| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.101 | 0.101 | |+| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.132 | 0.132 | |+| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.685 | 0.685 | |+| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.853 | 0.853 | || ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.017 | 0.017 | |-| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.036 | 0.036 | |-| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.039 | 0.039 | |-| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.155 | 0.155 | |-| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.244 | 0.244 | |-| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.353 | 0.353 | |-| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.670 | 0.670 | |-| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.469 | 1.469 | |-| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.071 | 0.071 | |-| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.503 | 0.503 | |-| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.769 | 1.769 | |-| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.096 | 2.096 | |+| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.035 | 0.035 | |+| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.050 | 0.050 | |+| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.153 | 0.153 | |+| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.236 | 0.236 | |+| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.346 | 0.346 | |+| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.678 | 0.678 | |+| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.482 | 1.482 | |+| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.059 | 0.059 | |+| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.536 | 0.536 | |+| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.665 | 1.665 | |+| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.150 | 2.150 | |diff --git a/tests/kernel-cases/ladder/golden.json b/tests/kernel-cases/ladder/golden.jsonindex a1e17675d8..1d66b19ec1 100644--- a/tests/kernel-cases/ladder/golden.json+++ b/tests/kernel-cases/ladder/golden.json@@ -9,7 +9,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.002421083,+ "seconds": 0.002505192,"status": "pass"},"ladder/01-primitives/002-cylinder": {@@ -21,7 +21,7 @@"vertices": 2,"volume_mm3": 9424.777353639352},- "seconds": 0.028312155,+ "seconds": 0.017216648,"status": "pass"},"ladder/01-primitives/003-cone": {@@ -33,7 +33,7 @@"vertices": 3,"volume_mm3": 3141.59242697122},- "seconds": 0.013765259,+ "seconds": 0.025275155,"status": "pass"},"ladder/01-primitives/004-frustum": {@@ -45,7 +45,7 @@"vertices": 2,"volume_mm3": 3665.191341582638},- "seconds": 0.016146822,+ "seconds": 0.016169941,"status": "pass"},"ladder/01-primitives/005-sphere": {@@ -57,7 +57,7 @@"vertices": 2,"volume_mm3": 4188.791896913583},- "seconds": 0.004701028,+ "seconds": 0.002811785,"status": "pass"},"ladder/01-primitives/006-torus": {@@ -69,7 +69,7 @@"vertices": 1,"volume_mm3": 9869.61010099745},- "seconds": 0.46266828,+ "seconds": 0.495867662,"status": "pass"},"ladder/02-booleans/001-coincident-face-join": {@@ -81,7 +81,7 @@"vertices": 8,"volume_mm3": 72000.0},- "seconds": 0.011548066,+ "seconds": 0.011773846,"status": "pass"},"ladder/02-booleans/002-coplanar-overlap-join": {@@ -93,7 +93,7 @@"vertices": 16,"volume_mm3": 84000.0},- "seconds": 0.013128601,+ "seconds": 0.013509612,"status": "pass"},"ladder/02-booleans/003-pocket-flush-with-top": {@@ -105,7 +105,7 @@"vertices": 16,"volume_mm3": 44000.0},- "seconds": 0.012931752,+ "seconds": 0.012970154,"status": "pass"},"ladder/02-booleans/004-edge-on-edge-no-overlap": {@@ -117,7 +117,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.00644086,+ "seconds": 0.006172788,"status": "pass"},"ladder/02-booleans/005-vertex-on-face-no-overlap": {@@ -129,7 +129,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.034711702,+ "seconds": 0.023457276,"status": "pass"},"ladder/02-booleans/006-tangent-along-line-no-overlap": {@@ -141,7 +141,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.026354658,+ "seconds": 0.015170114,"status": "pass"},"ladder/02-booleans/007-near-tangent-gap-1e-3": {@@ -153,7 +153,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.018841682,+ "seconds": 0.015431762,"status": "pass"},"ladder/02-booleans/008-near-tangent-gap-1e-6": {@@ -165,7 +165,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.015557891,+ "seconds": 0.028062604,"status": "pass"},"ladder/02-booleans/009-near-tangent-overlap-1e-3": {@@ -177,7 +177,7 @@"vertices": 12,"volume_mm3": 47999.9886864612},- "seconds": 0.029918273,+ "seconds": 0.017688185,"status": "pass"},"ladder/02-booleans/010-near-tangent-overlap-1e-6": {@@ -189,7 +189,7 @@"vertices": 8,"volume_mm3": 48000.0},- "seconds": 0.016262407,+ "seconds": 0.016272389,"status": "pass"},"ladder/02-booleans/011-tangent-along-circle-through-hole": {@@ -201,7 +201,7 @@"vertices": 10,"volume_mm3": 41716.81450698026},- "seconds": 0.034853735,+ "seconds": 0.035462532,"status": "pass"},"ladder/02-booleans/012-tangent-along-circle-bowl": {@@ -213,7 +213,7 @@"vertices": 12,"volume_mm3": 42764.01195654861},- "seconds": 0.043282076,+ "seconds": 0.04172308,"status": "pass"},"ladder/02-booleans/013-cut-across-cylinder-seam": {@@ -225,7 +225,7 @@"vertices": 8,"volume_mm3": 5888.550569284607},- "seconds": 0.038788456,+ "seconds": 0.027133097,"status": "pass"},"ladder/02-booleans/014-cut-through-sphere-pole": {@@ -237,7 +237,7 @@"vertices": 10,"volume_mm3": 4110.944533826848},- "seconds": 0.011872004,+ "seconds": 0.012077223,"status": "pass"},"ladder/02-booleans/015-knife-edge-wedge-cut": {@@ -249,7 +249,7 @@"vertices": 6,"volume_mm3": 24000.000000000007},- "seconds": 0.011355745,+ "seconds": 0.006479541,"status": "pass"},"ladder/02-booleans/016-v-groove-pinches-bottom-to-line": {@@ -261,7 +261,7 @@"vertices": 16,"volume_mm3": 38400.000000000015},- "seconds": 0.007019822,+ "seconds": 0.012742346,"status": "pass"},"ladder/02-booleans/017-cylinder-tangent-top-and-bottom": {@@ -273,7 +273,7 @@"vertices": 16,"volume_mm3": 29150.438046445848},- "seconds": 0.023206421,+ "seconds": 0.023333212,"status": "pass"},"ladder/02-booleans/018-hole-tangent-to-side-face": {@@ -285,7 +285,7 @@"vertices": 10,"volume_mm3": 41716.81209239218},- "seconds": 0.026489907,+ "seconds": 0.026519927,"status": "pass"},"ladder/02-booleans/019-notch-flush-with-end-face": {@@ -297,7 +297,7 @@"vertices": 16,"volume_mm3": 32000.000000000015},- "seconds": 0.012994217,+ "seconds": 0.013007835,"status": "pass"},"ladder/02-booleans/020-part-back-wall": {@@ -309,7 +309,7 @@"vertices": 12,"volume_mm3": 57000.0},- "seconds": 0.012916937,+ "seconds": 0.006816518,"status": "pass"},"ladder/02-booleans/021-holes-touching-at-a-point": {@@ -321,7 +321,7 @@"vertices": 10,"volume_mm3": 44858.40494270982},- "seconds": 0.066898018,+ "seconds": 0.066637833,"status": "pass"},"ladder/02-booleans/022-cylinder-grazing-a-hole-edge": {@@ -333,7 +333,7 @@"vertices": 16,"volume_mm3": 700.1694600993085},- "seconds": 0.059928004,+ "seconds": 0.060029028,"status": "pass"},"ladder/02-booleans/023-lips-1e-4-off-the-walls-joined": {@@ -345,7 +345,7 @@"vertices": 34,"volume_mm3": 769.4693261952389},- "seconds": 0.107631267,+ "seconds": 0.111073418,"status": "pass"},"ladder/02-booleans/024-wall-halves-merged-into-a-flange": {@@ -357,7 +357,7 @@"vertices": 6,"volume_mm3": 37875.03682260403},- "seconds": 0.175934284,+ "seconds": 0.185255547,"status": "pass"},"ladder/02-booleans/025-flush-chord-layers-joined": {@@ -369,7 +369,7 @@"vertices": 52,"volume_mm3": 24340.93465191528},- "seconds": 1.036233441,+ "seconds": 1.053367753,"status": "pass"},"ladder/03-analytic-profiles/001-extrude-rect-with-arc-end": {@@ -381,7 +381,7 @@"vertices": 8,"volume_mm3": 60566.37574264513},- "seconds": 0.013805836,+ "seconds": 0.007418136,"status": "pass"},"ladder/03-analytic-profiles/002-extrude-annulus": {@@ -393,7 +393,7 @@"vertices": 4,"volume_mm3": 14137.165496409769},- "seconds": 0.032683758,+ "seconds": 0.032865659,"status": "pass"},"ladder/03-analytic-profiles/003-extrude-tapered-circle": {@@ -405,7 +405,7 @@"vertices": 2,"volume_mm3": 5247.894417424099},- "seconds": 0.039307211,+ "seconds": 0.027602906,"status": "pass"},"ladder/03-analytic-profiles/004-revolve-full-off-axis": {@@ -417,7 +417,7 @@"vertices": 4,"volume_mm3": 28274.33099281954},- "seconds": 0.034131125,+ "seconds": 0.034186176,"status": "pass"},"ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere": {@@ -429,7 +429,7 @@"vertices": 2,"volume_mm3": 16755.16137194915},- "seconds": 0.072184153,+ "seconds": 0.059967396,"status": "pass"},"ladder/03-analytic-profiles/006-revolve-partial-90": {@@ -441,7 +441,7 @@"vertices": 8,"volume_mm3": 2356.1929112075295},- "seconds": 0.008946295,+ "seconds": 0.009172237,"status": "pass"},"ladder/03-analytic-profiles/007-revolve-180-touching-axis": {@@ -453,7 +453,7 @@"vertices": 4,"volume_mm3": 7068.582941859537},- "seconds": 0.015959589,+ "seconds": 0.008977837,"status": "pass"},"ladder/03-analytic-profiles/008-extrude-slot": {@@ -465,7 +465,7 @@"vertices": 8,"volume_mm3": 11141.594404248584},- "seconds": 0.011646259,+ "seconds": 0.015923988,"status": "pass"},"ladder/03-analytic-profiles/009-part-boss-and-slot": {@@ -477,7 +477,7 @@"vertices": 22,"volume_mm3": 55605.309277598055},- "seconds": 0.065359132,+ "seconds": 0.065602694,"status": "pass"},"ladder/03-analytic-profiles/010-revolve-horn-torus-270": {@@ -489,7 +489,7 @@"vertices": 4,"volume_mm3": 28932.185072957283},- "seconds": 0.07428757,+ "seconds": 0.078664992,"status": "pass"},"ladder/04-spline-profiles/001-extrude-bezier-arch": {@@ -501,7 +501,7 @@"vertices": 8,"volume_mm3": 8200.0},- "seconds": 0.008144467,+ "seconds": 0.014847761,"status": "pass"},"ladder/04-spline-profiles/002-revolve-bezier-profile": {@@ -513,7 +513,7 @@"vertices": 2,"volume_mm3": 34131.153548347604},- "seconds": 0.080633805,+ "seconds": 0.086235049,"status": "pass"},"ladder/04-spline-profiles/003-pipe-along-bezier": {@@ -525,7 +525,7 @@"vertices": 2,"volume_mm3": 580.8255293341258},- "seconds": 0.079442777,+ "seconds": 0.080747239,"status": "pass"},"ladder/04-spline-profiles/004-sweep-square-along-bezier": {@@ -537,7 +537,7 @@"vertices": 8,"volume_mm3": 739.5292097504819},- "seconds": 0.037046017,+ "seconds": 0.034935794,"status": "pass"},"ladder/04-spline-profiles/005-loft-square-frustum": {@@ -549,7 +549,7 @@"vertices": 8,"volume_mm3": 28000.000000000007},- "seconds": 0.009299752,+ "seconds": 0.009518031,"status": "pass"},"ladder/04-spline-profiles/006-loft-circle-frustum": {@@ -561,7 +561,7 @@"vertices": 2,"volume_mm3": 21991.14802951055},- "seconds": 0.031463497,+ "seconds": 0.042877884,"status": "pass"},"ladder/04-spline-profiles/007-loft-three-circles": {@@ -573,7 +573,7 @@"vertices": 2,"volume_mm3": 23457.221256199402},- "seconds": 0.038500679,+ "seconds": 0.038671886,"status": "pass"},"ladder/04-spline-profiles/008-loft-square-to-circle": {@@ -585,7 +585,7 @@"vertices": 8,"volume_mm3": 26310.54362092466},- "seconds": 0.013877676,+ "seconds": 0.020851108,"status": "pass"},"ladder/04-spline-profiles/009-extrude-periodic-fit-spline": {@@ -597,7 +597,7 @@"vertices": 12,"volume_mm3": 12281.011858436344},- "seconds": 0.028766989,+ "seconds": 0.029248095,"status": "pass"},"ladder/04-spline-profiles/010-part-bezier-window": {@@ -609,7 +609,7 @@"vertices": 26,"volume_mm3": 54273.309277598055},- "seconds": 0.095040941,+ "seconds": 0.105691401,"status": "pass"},"ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined": {@@ -621,7 +621,7 @@"vertices": 584,"volume_mm3": 44443.494125231206},- "seconds": 1.129550392,+ "seconds": 1.125528009,"status": "pass"},"ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad": {@@ -633,7 +633,7 @@"vertices": 57,"volume_mm3": 100193.008857701},- "seconds": 0.499138439,+ "seconds": 0.474738461,"status": "pass"},"ladder/05-holes-and-taps/001-simple-through": {@@ -645,7 +645,7 @@"vertices": 10,"volume_mm3": 46429.20345247036},- "seconds": 0.030064675,+ "seconds": 0.018020219,"status": "pass"},"ladder/05-holes-and-taps/002-simple-blind-flat": {@@ -657,7 +657,7 @@"vertices": 10,"volume_mm3": 47214.60167821204},- "seconds": 0.024571035,+ "seconds": 0.024898321,"status": "pass"},"ladder/05-holes-and-taps/003-drilled-blind-118": {@@ -669,7 +669,7 @@"vertices": 12,"volume_mm3": 47135.94953558977},- "seconds": 0.022535569,+ "seconds": 0.02266329,"status": "pass"},"ladder/05-holes-and-taps/004-counterbore": {@@ -681,7 +681,7 @@"vertices": 12,"volume_mm3": 46926.50439234107},- "seconds": 0.048801764,+ "seconds": 0.04904864,"status": "pass"},"ladder/05-holes-and-taps/005-countersink": {@@ -693,7 +693,7 @@"vertices": 12,"volume_mm3": 47219.57154291447},- "seconds": 0.060514999,+ "seconds": 0.061193095,"status": "pass"},"ladder/05-holes-and-taps/006-tapped-m6-through": {@@ -705,7 +705,7 @@"vertices": 10,"volume_mm3": 47607.30072936878},- "seconds": 0.017080042,+ "seconds": 0.017724234,"status": "pass"},"ladder/05-holes-and-taps/007-tapped-m8-blind": {@@ -717,7 +717,7 @@"vertices": 12,"volume_mm3": 47546.393985981646},- "seconds": 0.023700407,+ "seconds": 0.02327246,"status": "pass"},"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face": {@@ -729,7 +729,7 @@"vertices": 4,"volume_mm3": 74844.80869901458},- "seconds": 0.068223193,+ "seconds": 0.081519242,"status": "pass"},"ladder/05-holes-and-taps/009-hole-0.5-from-edge": {@@ -741,7 +741,7 @@"vertices": 10,"volume_mm3": 46429.20147858148},- "seconds": 0.017685341,+ "seconds": 0.018684925,"status": "pass"},"ladder/05-holes-and-taps/010-hole-tangent-to-end-face": {@@ -753,7 +753,7 @@"vertices": 10,"volume_mm3": 46429.202650315056},- "seconds": 0.019412548,+ "seconds": 0.019266191,"status": "pass"},"ladder/05-holes-and-taps/011-crossing-holes-steinmetz": {@@ -765,7 +765,7 @@"vertices": 17,"volume_mm3": 43954.275881084504},- "seconds": 0.063841221,+ "seconds": 0.053044093,"status": "pass"},"ladder/05-holes-and-taps/012-crossing-tapped-holes-offset": {@@ -777,7 +777,7 @@"vertices": 14,"volume_mm3": 46870.21851307568},- "seconds": 0.071817865,+ "seconds": 0.061035223,"status": "pass"},"ladder/05-holes-and-taps/013-part-holes": {@@ -789,111 +789,211 @@"vertices": 32,"volume_mm3": 53470.419311175334},- "seconds": 0.234927852,+ "seconds": 0.22177746,"status": "pass"},"ladder/06-threads/001-external-m10-full": {"measured": {- "area_mm2": 1529.0164922938948,+ "area_mm2": 1528.998539117189,"body_count": 1,- "edges": 12,- "faces": 6,- "vertices": 8,- "volume_mm3": 1954.199115350778+ "edges": 252,+ "faces": 86,+ "vertices": 168,+ "volume_mm3": 1954.2449542776249},- "seconds": 1.3368298730000001,+ "seconds": 1.6369588849999999,"status": "pass"},"ladder/06-threads/002-external-m10x1-fine": {"measured": {- "area_mm2": 1581.5491374615535,+ "area_mm2": 1581.5205208524822,"body_count": 1,- "edges": 12,- "faces": 6,- "vertices": 8,- "volume_mm3": 2081.8666358146415+ "edges": 372,+ "faces": 126,+ "vertices": 248,+ "volume_mm3": 2081.899948214229},- "seconds": 2.362301245,+ "seconds": 2.412049282,"status": "pass"},"ladder/06-threads/003-external-m10-partial-length": {"measured": {- "area_mm2": 1314.9714556944045,+ "area_mm2": 1314.9630494174853,"body_count": 1,- "edges": 15,- "faces": 7,- "vertices": 10,- "volume_mm3": 2155.198115106591+ "edges": 132,+ "faces": 46,+ "vertices": 88,+ "volume_mm3": 2155.2201253347134},- "seconds": 0.622200415,+ "seconds": 0.826637836,"status": "pass"},"ladder/06-threads/004-external-m10-to-shoulder": {"measured": {- "area_mm2": 2169.7800481918475,+ "area_mm2": 2047.0228358498966,"body_count": 1,- "edges": 21,- "faces": 10,- "vertices": 14,- "volume_mm3": 3615.802302421407+ "edges": 213,+ "faces": 74,+ "vertices": 142,+ "volume_mm3": 3648.5291584977404},- "seconds": 1.218730446,+ "seconds": 1.367275082,"status": "pass"},"ladder/06-threads/005-internal-m10-through": {"measured": {- "area_mm2": 4978.062684127769,+ "area_mm2": 4978.101312600045,"body_count": 1,- "edges": 24,- "faces": 10,- "vertices": 16,- "volume_mm3": 16688.208561903153+ "edges": 186,+ "faces": 64,+ "vertices": 124,+ "volume_mm3": 16688.181727949996},- "seconds": 0.726237522,+ "seconds": 1.107371317,"status": "pass"},"ladder/06-threads/006-external-m10-into-chamfer": {"measured": {- "area_mm2": 1508.1279652569233,+ "area_mm2": 1508.108891537519,"body_count": 1,- "edges": 15,- "faces": 7,- "vertices": 10,- "volume_mm3": 1948.6477627849551+ "edges": 252,+ "faces": 86,+ "vertices": 168,+ "volume_mm3": 1948.6927071991595},- "seconds": 1.3903218339999999,+ "seconds": 1.652185436,"status": "pass"},"ladder/06-threads/007-external-m10-at-filleted-shoulder": {"measured": {- "area_mm2": 2120.444130537007,+ "area_mm2": 2018.7759360368239,"body_count": 1,- "edges": 24,- "faces": 11,- "vertices": 16,- "volume_mm3": 3636.797350214795+ "edges": 203,+ "faces": 71,+ "vertices": 135,+ "volume_mm3": 3668.9704031534766},- "seconds": 1.231074762,+ "seconds": 1.3640140029999999,"status": "pass"},"ladder/06-threads/008-multi-start-thread": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1532.2853732955155,+ "body_count": 1,+ "edges": 264,+ "faces": 90,+ "vertices": 176,+ "volume_mm3": 1954.245227235153+ },+ "seconds": 3.154548554,+ "status": "pass"},"ladder/06-threads/009-thread-runout-length": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2023.0564304737718,+ "body_count": 1,+ "edges": 214,+ "faces": 77,+ "vertices": 140,+ "volume_mm3": 3673.436434421382+ },+ "seconds": 1.431738124,+ "status": "pass"},"ladder/06-threads/010-part-threaded-boss": {"measured": {- "area_mm2": 13583.777771562018,+ "area_mm2": 13318.76579174848,"body_count": 1,- "edges": 63,- "faces": 25,- "vertices": 42,- "volume_mm3": 53114.19660782891+ "edges": 111,+ "faces": 41,+ "vertices": 74,+ "volume_mm3": 53208.187629619366+ },+ "seconds": 0.701229636,+ "status": "pass"+ },+ "ladder/06-threads/011-external-tr20x4": {+ "measured": {+ "area_mm2": 3008.5109289311276,+ "body_count": 1,+ "edges": 84,+ "faces": 30,+ "vertices": 56,+ "volume_mm3": 6065.464162834598+ },+ "seconds": 0.61208125,+ "status": "pass"+ },+ "ladder/06-threads/012-external-acme-3-4-6": {+ "measured": {+ "area_mm2": 2943.7315602592976,+ "body_count": 1,+ "edges": 84,+ "faces": 30,+ "vertices": 56,+ "volume_mm3": 5689.271052485101+ },+ "seconds": 0.579189061,+ "status": "pass"+ },+ "ladder/06-threads/013-external-s20x4": {+ "measured": {+ "area_mm2": 3376.925753383339,+ "body_count": 1,+ "edges": 87,+ "faces": 31,+ "vertices": 58,+ "volume_mm3": 5454.578654614414+ },+ "seconds": 0.597222753,+ "status": "pass"+ },+ "ladder/06-threads/014-external-buttress-asme-1.5-8": {+ "measured": {+ "area_mm2": 5916.2769083388575,+ "body_count": 1,+ "edges": 87,+ "faces": 31,+ "vertices": 58,+ "volume_mm3": 19631.080967830752+ },+ "seconds": 0.672528778,+ "status": "pass"+ },+ "ladder/06-threads/015-internal-tr20x4-nut": {+ "measured": {+ "area_mm2": 9076.623586009078,+ "body_count": 1,+ "edges": 96,+ "faces": 34,+ "vertices": 64,+ "volume_mm3": 32097.519799715614},- "seconds": 0.659778997,+ "seconds": 0.614947997,+ "status": "pass"+ },+ "ladder/06-threads/016-external-m10-left-hand": {+ "measured": {+ "area_mm2": 1528.998538562401,+ "body_count": 1,+ "edges": 252,+ "faces": 86,+ "vertices": 168,+ "volume_mm3": 1954.2449602433921+ },+ "seconds": 1.564137117,+ "status": "pass"+ },+ "ladder/06-threads/017-external-m10-chamfered-tip": {+ "measured": {+ "area_mm2": 1500.75072007837,+ "body_count": 1,+ "edges": 254,+ "faces": 88,+ "vertices": 168,+ "volume_mm3": 1947.8329205613231+ },+ "seconds": 3.244508519,"status": "pass"},"ladder/07-fillets/001-single-edge-r5": {@@ -905,7 +1005,7 @@"vertices": 10,"volume_mm3": 47678.09530101598},- "seconds": 0.007045327,+ "seconds": 0.00714156,"status": "pass"},"ladder/07-fillets/002-four-vertical-edges-r5": {@@ -917,7 +1017,7 @@"vertices": 16,"volume_mm3": 47570.79943563683},- "seconds": 0.014052829,+ "seconds": 0.013761373,"status": "pass"},"ladder/07-fillets/003-tangent-chain-r3": {@@ -929,7 +1029,7 @@"vertices": 24,"volume_mm3": 47209.22370148293},- "seconds": 0.043514557,+ "seconds": 0.043945698,"status": "pass"},"ladder/07-fillets/004-convex-and-concave-r5": {@@ -941,7 +1041,7 @@"vertices": 16,"volume_mm3": 14000.002049410516},- "seconds": 0.020404232,+ "seconds": 0.010765204,"status": "pass"},"ladder/07-fillets/005-variable-r5-to-r1": {@@ -953,7 +1053,7 @@"vertices": 10,"volume_mm3": 47866.93985730924},- "seconds": 0.010664095,+ "seconds": 0.010502899,"status": "pass"},"ladder/07-fillets/006-variable-r5-to-zero": {@@ -965,7 +1065,7 @@"vertices": 9,"volume_mm3": 47892.693434961286},- "seconds": 0.009475033,+ "seconds": 0.009275967,"status": "pass"},"ladder/07-fillets/007-variable-r5-to-1e-3": {@@ -977,7 +1077,7 @@"vertices": 10,"volume_mm3": 47892.67196922709},- "seconds": 0.018208591,+ "seconds": 0.019358912,"status": "pass"},"ladder/07-fillets/008-constant-r1e-3": {@@ -989,7 +1089,7 @@"vertices": 10,"volume_mm3": 47999.99997963964},- "seconds": 0.012294053,+ "seconds": 0.006515974,"status": "pass"},"ladder/07-fillets/009-corner-three-equal-r5": {@@ -1001,7 +1101,7 @@"vertices": 13,"volume_mm3": 47377.122731304844},- "seconds": 0.01157685,+ "seconds": 0.011727206,"status": "pass"},"ladder/07-fillets/010-corner-unequal-r7-r3": {@@ -1013,7 +1113,7 @@"vertices": 14,"volume_mm3": 47604.38618238413},- "seconds": 0.018646689,+ "seconds": 0.030923239,"status": "pass"},"ladder/07-fillets/011-chain-ending-at-corner": {@@ -1025,7 +1125,7 @@"vertices": 11,"volume_mm3": 47475.477375283306},- "seconds": 0.009817834,+ "seconds": 0.009689281,"status": "pass"},"ladder/07-fillets/012-variable-into-rounded-corner": {@@ -1037,7 +1137,7 @@"vertices": 12,"volume_mm3": 47754.87775109653},- "seconds": 0.0295324,+ "seconds": 0.028910416,"status": "pass"},"ladder/07-fillets/013-corner-setback": {@@ -1053,15 +1153,15 @@"vertices": 3,"volume_mm3": 6231.659066701741},- "seconds": 0.040479616,+ "seconds": 0.039329186,"status": "pass"},"ladder/07-fillets/015-corner-g2-patch": {- "seconds": 0.002871708,+ "seconds": 0.005262881,"status": "unsupported"},"ladder/07-fillets/016-corner-three-sequential-r5-r3-r7": {- "seconds": 0.026357347,+ "seconds": 0.025799798,"status": "fail"},"ladder/07-fillets/017-part-rounds": {@@ -1073,7 +1173,7 @@"vertices": 39,"volume_mm3": 53151.0192291965},- "seconds": 0.388790715,+ "seconds": 0.405183101,"status": "pass"},"ladder/08-chamfers/001-equal-5": {@@ -1085,7 +1185,7 @@"vertices": 10,"volume_mm3": 47250.000000000015},- "seconds": 0.01154789,+ "seconds": 0.011884311,"status": "pass"},"ladder/08-chamfers/002-two-distances-5-3": {@@ -1097,7 +1197,7 @@"vertices": 10,"volume_mm3": 47550.00000001157},- "seconds": 0.006581516,+ "seconds": 0.006158836,"status": "pass"},"ladder/08-chamfers/003-distance-angle-5-30": {@@ -1109,7 +1209,7 @@"vertices": 10,"volume_mm3": 47566.987298072774},- "seconds": 0.00646942,+ "seconds": 0.006377221,"status": "pass"},"ladder/08-chamfers/004-corner-three-equal-3": {@@ -1121,7 +1221,7 @@"vertices": 14,"volume_mm3": 47480.25},- "seconds": 0.009521322,+ "seconds": 0.01810766,"status": "pass"},"ladder/08-chamfers/005-corner-two-mitred-3": {@@ -1133,7 +1233,7 @@"vertices": 11,"volume_mm3": 47559.0},- "seconds": 0.008023283,+ "seconds": 0.008225852,"status": "pass"},"ladder/08-chamfers/006-curved-edge-2": {@@ -1145,7 +1245,7 @@"vertices": 3,"volume_mm3": 6165.898978570243},- "seconds": 0.040025774,+ "seconds": 0.03931853,"status": "pass"},"ladder/08-chamfers/007-chamfer-then-fillets": {@@ -1157,7 +1257,7 @@"vertices": 14,"volume_mm3": 47700.04681392183},- "seconds": 0.027111446,+ "seconds": 0.026869289,"status": "pass"},"ladder/08-chamfers/008-part-chamfers": {@@ -1169,7 +1269,7 @@"vertices": 42,"volume_mm3": 53006.93294467868},- "seconds": 0.519171731,+ "seconds": 0.514177481,"status": "pass"},"ladder/09-shells-and-offsets/001-box-open-top-t2": {@@ -1181,7 +1281,7 @@"vertices": 16,"volume_mm3": 11712.00000000001},- "seconds": 0.009184408,+ "seconds": 0.017281497,"status": "pass"},"ladder/09-shells-and-offsets/002-cylinder-open-top-t1": {@@ -1193,7 +1293,7 @@"vertices": 4,"volume_mm3": 2045.1781194378996},- "seconds": 0.054106411,+ "seconds": 0.06566697,"status": "pass"},"ladder/09-shells-and-offsets/003-tube-two-open-faces": {@@ -1205,7 +1305,7 @@"vertices": 16,"volume_mm3": 7680.000000000007},- "seconds": 0.009418953,+ "seconds": 0.016733607,"status": "pass"},"ladder/09-shells-and-offsets/004-thin-wall-0.2": {@@ -1217,7 +1317,7 @@"vertices": 16,"volume_mm3": 1268.8319999999949},- "seconds": 0.016972329,+ "seconds": 0.017096105,"status": "pass"},"ladder/09-shells-and-offsets/005-shell-rounds-r5-t2": {@@ -1229,7 +1329,7 @@"vertices": 32,"volume_mm3": 11421.860960200946},- "seconds": 0.098389195,+ "seconds": 0.094276137,"status": "pass"},"ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2": {@@ -1241,7 +1341,7 @@"vertices": 24,"volume_mm3": 11694.832919801527},- "seconds": 0.041722741,+ "seconds": 0.043422064,"status": "pass"},"ladder/09-shells-and-offsets/007-offset-top-face-5": {@@ -1253,7 +1353,7 @@"vertices": 8,"volume_mm3": 60000.00000000002},- "seconds": 0.017068202,+ "seconds": 0.01559306,"status": "pass"},"ladder/09-shells-and-offsets/008-offset-cylinder-wall-2": {@@ -1265,7 +1365,7 @@"vertices": 2,"volume_mm3": 9047.786411660763},- "seconds": 0.040247807,+ "seconds": 0.040210149,"status": "pass"},"ladder/09-shells-and-offsets/009-shell-outside-t2": {@@ -1277,7 +1377,7 @@"vertices": 16,"volume_mm3": 13952.000000000015},- "seconds": 0.031217512,+ "seconds": 0.030901975,"status": "pass"},"ladder/09-shells-and-offsets/010-shell-under-rounded-top": {@@ -1289,7 +1389,7 @@"vertices": 24,"volume_mm3": 11375.174354868088},- "seconds": 0.090267208,+ "seconds": 0.101436608,"status": "pass"},"ladder/09-shells-and-offsets/011-part-shell": {@@ -1301,7 +1401,7 @@"vertices": 92,"volume_mm3": 15397.69748736967},- "seconds": 0.867852336,+ "seconds": 0.852507562,"status": "pass"},"ladder/09-shells-and-offsets/012-closed-shell-sealed-void": {@@ -1313,7 +1413,7 @@"vertices": 16,"volume_mm3": 15743.999999999998},- "seconds": 0.008990887,+ "seconds": 0.016617239,"status": "pass"},"ladder/09-shells-and-offsets/013-dome-shelled-from-base": {@@ -1325,7 +1425,7 @@"vertices": 4,"volume_mm3": 4540.648982326449},- "seconds": 0.123468649,+ "seconds": 0.131831924,"status": "pass"},"ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled": {@@ -1337,7 +1437,7 @@"vertices": 32,"volume_mm3": 47497.57000224123},- "seconds": 0.089872966,+ "seconds": 0.095305804,"status": "pass"},"ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back": {@@ -1349,7 +1449,7 @@"vertices": 7,"volume_mm3": 5540.613076260847},- "seconds": 0.691698914,+ "seconds": 0.685183438,"status": "pass"},"ladder/10-patterns-and-mirrors/001-rect-pattern-holes": {@@ -1361,7 +1461,7 @@"vertices": 20,"volume_mm3": 22821.901949174513},- "seconds": 0.155016195,+ "seconds": 0.153295004,"status": "pass"},"ladder/10-patterns-and-mirrors/002-circular-pattern-holes": {@@ -1373,7 +1473,7 @@"vertices": 18,"volume_mm3": 26012.383532001513},- "seconds": 0.352542366,+ "seconds": 0.345883259,"status": "pass"},"ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core": {@@ -1385,7 +1485,7 @@"vertices": 26,"volume_mm3": 9195.866260243196},- "seconds": 0.243903077,+ "seconds": 0.23648424,"status": "pass"},"ladder/10-patterns-and-mirrors/004-mirror-body-joined": {@@ -1397,7 +1497,7 @@"vertices": 12,"volume_mm3": 44858.40293082078},- "seconds": 0.036172974,+ "seconds": 0.035426469,"status": "pass"},"ladder/10-patterns-and-mirrors/005-mirror-feature": {@@ -1409,7 +1509,7 @@"vertices": 12,"volume_mm3": 44858.4039421837},- "seconds": 0.038690761,+ "seconds": 0.049767013,"status": "pass"},"ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores": {@@ -1421,7 +1521,7 @@"vertices": 26,"volume_mm3": 26304.552440002004},- "seconds": 0.670372726,+ "seconds": 0.677654456,"status": "pass"},"ladder/10-patterns-and-mirrors/007-pattern-bodies": {@@ -1433,7 +1533,7 @@"vertices": 8,"volume_mm3": 1130.973281262568},- "seconds": 0.017452188,+ "seconds": 0.017109497,"status": "pass"},"ladder/10-patterns-and-mirrors/008-part-vents": {@@ -1445,7 +1545,7 @@"vertices": 100,"volume_mm3": 15355.286014502955},- "seconds": 1.468559785,+ "seconds": 1.481745126,"status": "pass"},"ladder/11-cumulative-parts/001-bracket": {@@ -1457,7 +1557,7 @@"vertices": 20,"volume_mm3": 31550.35228808287},- "seconds": 0.071211606,+ "seconds": 0.059381366,"status": "pass"},"ladder/11-cumulative-parts/002-flange": {@@ -1469,33 +1569,33 @@"vertices": 20,"volume_mm3": 55442.52558072023},- "seconds": 0.502748653,+ "seconds": 0.535863011,"status": "pass"},"ladder/11-cumulative-parts/003-threaded-flange": {"measured": {- "area_mm2": 18059.595491495795,+ "area_mm2": 17355.838402078,"body_count": 1,- "edges": 57,- "faces": 22,- "vertices": 38,- "volume_mm3": 52446.67350160611+ "edges": 104,+ "faces": 38,+ "vertices": 69,+ "volume_mm3": 52978.053115805815},- "seconds": 1.769302135,+ "seconds": 1.66538598,"status": "pass"},"ladder/11-cumulative-parts/004-housing": {"measured": {- "area_mm2": 21277.09688631319,+ "area_mm2": 21105.285520302223,"body_count": 1,- "edges": 172,- "faces": 64,- "vertices": 114,- "volume_mm3": 15051.402626654897+ "edges": 210,+ "faces": 78,+ "vertices": 139,+ "volume_mm3": 15138.516074654483},- "seconds": 2.09595716,+ "seconds": 2.150037131,"status": "pass"}},- "reason": "twelve cases for the SMLib and tessellation fixes: point contact, near-coincident and merged faces, horn torus, crossing lofts, sealed and spherical shells"+ "reason": "thread rework: forms, starts, hand, runout, chamfered tip, extents; screw sweep walls exact"}diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.jsonindex 00b9110b81..aea1a98def 100644--- a/tests/kernel-cases/ladder/ladder.json+++ b/tests/kernel-cases/ladder/ladder.json@@ -4,9 +4,9 @@"cases": ["ladder/01-primitives/001-box","ladder/01-primitives/005-sphere",- "ladder/01-primitives/003-cone","ladder/01-primitives/004-frustum","ladder/01-primitives/002-cylinder",+ "ladder/01-primitives/003-cone","ladder/01-primitives/006-torus"],"tier": "01-primitives",@@ -15,24 +15,24 @@{"cases": ["ladder/02-booleans/004-edge-on-edge-no-overlap",- "ladder/02-booleans/016-v-groove-pinches-bottom-to-line","ladder/02-booleans/015-knife-edge-wedge-cut",+ "ladder/02-booleans/020-part-back-wall","ladder/02-booleans/001-coincident-face-join","ladder/02-booleans/014-cut-through-sphere-pole",- "ladder/02-booleans/020-part-back-wall",+ "ladder/02-booleans/016-v-groove-pinches-bottom-to-line","ladder/02-booleans/003-pocket-flush-with-top","ladder/02-booleans/019-notch-flush-with-end-face","ladder/02-booleans/002-coplanar-overlap-join",- "ladder/02-booleans/008-near-tangent-gap-1e-6",- "ladder/02-booleans/010-near-tangent-overlap-1e-6",- "ladder/02-booleans/007-near-tangent-gap-1e-3",- "ladder/02-booleans/017-cylinder-tangent-top-and-bottom","ladder/02-booleans/006-tangent-along-line-no-overlap",- "ladder/02-booleans/018-hole-tangent-to-side-face",+ "ladder/02-booleans/007-near-tangent-gap-1e-3",+ "ladder/02-booleans/010-near-tangent-overlap-1e-6","ladder/02-booleans/009-near-tangent-overlap-1e-3",+ "ladder/02-booleans/017-cylinder-tangent-top-and-bottom","ladder/02-booleans/005-vertex-on-face-no-overlap",- "ladder/02-booleans/011-tangent-along-circle-through-hole",+ "ladder/02-booleans/018-hole-tangent-to-side-face","ladder/02-booleans/013-cut-across-cylinder-seam",+ "ladder/02-booleans/008-near-tangent-gap-1e-6",+ "ladder/02-booleans/011-tangent-along-circle-through-hole","ladder/02-booleans/012-tangent-along-circle-bowl","ladder/02-booleans/022-cylinder-grazing-a-hole-edge","ladder/02-booleans/021-holes-touching-at-a-point",@@ -45,15 +45,15 @@},{"cases": [- "ladder/03-analytic-profiles/006-revolve-partial-90",- "ladder/03-analytic-profiles/008-extrude-slot","ladder/03-analytic-profiles/001-extrude-rect-with-arc-end","ladder/03-analytic-profiles/007-revolve-180-touching-axis",+ "ladder/03-analytic-profiles/006-revolve-partial-90",+ "ladder/03-analytic-profiles/008-extrude-slot",+ "ladder/03-analytic-profiles/003-extrude-tapered-circle","ladder/03-analytic-profiles/002-extrude-annulus","ladder/03-analytic-profiles/004-revolve-full-off-axis",- "ladder/03-analytic-profiles/003-extrude-tapered-circle",- "ladder/03-analytic-profiles/009-part-boss-and-slot","ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere",+ "ladder/03-analytic-profiles/009-part-boss-and-slot","ladder/03-analytic-profiles/010-revolve-horn-torus-270"],"tier": "03-analytic-profiles",@@ -61,13 +61,13 @@},{"cases": [- "ladder/04-spline-profiles/001-extrude-bezier-arch","ladder/04-spline-profiles/005-loft-square-frustum",+ "ladder/04-spline-profiles/001-extrude-bezier-arch","ladder/04-spline-profiles/008-loft-square-to-circle","ladder/04-spline-profiles/009-extrude-periodic-fit-spline",- "ladder/04-spline-profiles/006-loft-circle-frustum","ladder/04-spline-profiles/004-sweep-square-along-bezier","ladder/04-spline-profiles/007-loft-three-circles",+ "ladder/04-spline-profiles/006-loft-circle-frustum","ladder/04-spline-profiles/003-pipe-along-bezier","ladder/04-spline-profiles/002-revolve-bezier-profile","ladder/04-spline-profiles/010-part-bezier-window",@@ -80,17 +80,17 @@{"cases": ["ladder/05-holes-and-taps/006-tapped-m6-through",+ "ladder/05-holes-and-taps/001-simple-through","ladder/05-holes-and-taps/009-hole-0.5-from-edge","ladder/05-holes-and-taps/010-hole-tangent-to-end-face","ladder/05-holes-and-taps/003-drilled-blind-118","ladder/05-holes-and-taps/007-tapped-m8-blind","ladder/05-holes-and-taps/002-simple-blind-flat",- "ladder/05-holes-and-taps/001-simple-through","ladder/05-holes-and-taps/004-counterbore",- "ladder/05-holes-and-taps/005-countersink","ladder/05-holes-and-taps/011-crossing-holes-steinmetz",- "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face","ladder/05-holes-and-taps/012-crossing-tapped-holes-offset",+ "ladder/05-holes-and-taps/005-countersink",+ "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face","ladder/05-holes-and-taps/013-part-holes"],"tier": "05-holes-and-taps",@@ -98,22 +98,22 @@},{"cases": [- "ladder/06-threads/003-external-m10-partial-length",+ "ladder/06-threads/012-external-acme-3-4-6",+ "ladder/06-threads/013-external-s20x4",+ "ladder/06-threads/011-external-tr20x4",+ "ladder/06-threads/015-internal-tr20x4-nut",+ "ladder/06-threads/014-external-buttress-asme-1.5-8","ladder/06-threads/010-part-threaded-boss",+ "ladder/06-threads/003-external-m10-partial-length","ladder/06-threads/005-internal-m10-through",- "ladder/06-threads/004-external-m10-to-shoulder","ladder/06-threads/007-external-m10-at-filleted-shoulder",+ "ladder/06-threads/004-external-m10-to-shoulder",+ "ladder/06-threads/009-thread-runout-length",+ "ladder/06-threads/016-external-m10-left-hand","ladder/06-threads/001-external-m10-full","ladder/06-threads/006-external-m10-into-chamfer","ladder/06-threads/002-external-m10x1-fine","ladder/06-threads/008-multi-start-thread",- "ladder/06-threads/009-thread-runout-length",- "ladder/06-threads/011-external-tr20x4",- "ladder/06-threads/012-external-acme-3-4-6",- "ladder/06-threads/013-external-s20x4",- "ladder/06-threads/014-external-buttress-asme-1.5-8",- "ladder/06-threads/015-internal-tr20x4-nut",- "ladder/06-threads/016-external-m10-left-hand","ladder/06-threads/017-external-m10-chamfered-tip"],"tier": "06-threads",@@ -122,18 +122,18 @@{"cases": ["ladder/07-fillets/015-corner-g2-patch",+ "ladder/07-fillets/008-constant-r1e-3","ladder/07-fillets/001-single-edge-r5","ladder/07-fillets/006-variable-r5-to-zero","ladder/07-fillets/011-chain-ending-at-corner","ladder/07-fillets/005-variable-r5-to-r1",+ "ladder/07-fillets/004-convex-and-concave-r5","ladder/07-fillets/009-corner-three-equal-r5",- "ladder/07-fillets/008-constant-r1e-3","ladder/07-fillets/002-four-vertical-edges-r5","ladder/07-fillets/007-variable-r5-to-1e-3",- "ladder/07-fillets/010-corner-unequal-r7-r3",- "ladder/07-fillets/004-convex-and-concave-r5","ladder/07-fillets/016-corner-three-sequential-r5-r3-r7","ladder/07-fillets/012-variable-into-rounded-corner",+ "ladder/07-fillets/010-corner-unequal-r7-r3","ladder/07-fillets/014-curved-edge-r2","ladder/07-fillets/003-tangent-chain-r3","ladder/07-fillets/017-part-rounds",@@ -144,11 +144,11 @@},{"cases": [- "ladder/08-chamfers/003-distance-angle-5-30","ladder/08-chamfers/002-two-distances-5-3",+ "ladder/08-chamfers/003-distance-angle-5-30","ladder/08-chamfers/005-corner-two-mitred-3",- "ladder/08-chamfers/004-corner-three-equal-3","ladder/08-chamfers/001-equal-5",+ "ladder/08-chamfers/004-corner-three-equal-3","ladder/08-chamfers/007-chamfer-then-fillets","ladder/08-chamfers/006-curved-edge-2","ladder/08-chamfers/008-part-chamfers"@@ -158,18 +158,18 @@},{"cases": [+ "ladder/09-shells-and-offsets/007-offset-top-face-5","ladder/09-shells-and-offsets/012-closed-shell-sealed-void",- "ladder/09-shells-and-offsets/001-box-open-top-t2","ladder/09-shells-and-offsets/003-tube-two-open-faces","ladder/09-shells-and-offsets/004-thin-wall-0.2",- "ladder/09-shells-and-offsets/007-offset-top-face-5",+ "ladder/09-shells-and-offsets/001-box-open-top-t2","ladder/09-shells-and-offsets/009-shell-outside-t2","ladder/09-shells-and-offsets/008-offset-cylinder-wall-2","ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2","ladder/09-shells-and-offsets/002-cylinder-open-top-t1",+ "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2","ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled","ladder/09-shells-and-offsets/010-shell-under-rounded-top",- "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2","ladder/09-shells-and-offsets/013-dome-shelled-from-base","ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back","ladder/09-shells-and-offsets/011-part-shell"