SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 242/509: kernel-cases: the ladder takes twelve cases for this round's kernel fixes
jyvikodb2552f07894
diff --git a/docs/kernel-ladder.md b/docs/kernel-ladder.mdindex d3887ee66f..b1e48ec810 100644--- a/docs/kernel-ladder.md+++ b/docs/kernel-ladder.md@@ -9,16 +9,16 @@ The **frontier** is the first case of a tier, in ladder order, that fails (fail,| Tier | What | Cases | Results | Frontier ||---|---|---|---|---|| 01-primitives | primitives with closed-form volumes | 6 | 6 pass | – |-| 02-booleans | booleans in the degeneracy classes, and cuts that end in a single line | 20 | 1 fail, 19 pass | 018-hole-tangent-to-side-face |-| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 9 | 9 pass | – |-| 04-spline-profiles | spline profiles, sweeps and lofts | 10 | 10 pass | – |-| 05-holes-and-taps | holes and tapped holes | 13 | 1 fail, 12 pass | 010-hole-tangent-to-end-face |-| 06-threads | modelled threads | 10 | 1 fail, 7 pass, 2 unsupported | 006-external-m10-into-chamfer |-| 07-fillets | constant, variable and corner fillets | 17 | 3 fail, 12 pass, 2 unsupported | 012-variable-into-rounded-corner |-| 08-chamfers | chamfers | 8 | 1 fail, 7 pass | 008-part-chamfers |-| 09-shells-and-offsets | shells and offsets | 11 | 2 fail, 9 pass | 010-shell-under-rounded-top |-| 10-patterns-and-mirrors | patterns and mirrors | 8 | 1 fail, 7 pass | 008-part-vents |-| 11-cumulative-parts | parts combining every tier | 4 | 3 fail, 1 pass | 002-flange |+| 02-booleans | booleans in the degeneracy classes, and cuts that end in a single line | 25 | 25 pass | – |+| 03-analytic-profiles | extrudes and revolves of line-and-arc profiles | 10 | 10 pass | – |+| 04-spline-profiles | spline profiles, sweeps and lofts | 12 | 12 pass | – |+| 05-holes-and-taps | holes and tapped holes | 13 | 13 pass | – |+| 06-threads | modelled threads | 10 | 8 pass, 2 unsupported | – |+| 07-fillets | constant, variable and corner fillets | 17 | 1 fail, 14 pass, 2 unsupported | 016-corner-three-sequential-r5-r3-r7 |+| 08-chamfers | chamfers | 8 | 8 pass | – |+| 09-shells-and-offsets | shells and offsets | 15 | 15 pass | – |+| 10-patterns-and-mirrors | patterns and mirrors | 8 | 8 pass | – |+| 11-cumulative-parts | parts combining every tier | 4 | 4 pass | – |Cases where SMLib's check gave no verdict on a body (SMLib can't take the record yet), so only the record's checks graded validity: 0.@@ -28,119 +28,131 @@ Times are the commands' own, in seconds, from the case's process; **golden** is| Case | What | Answer | Result | s | golden s | changes ||---|---|---|---|---|---|---|-| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.003 | – | status was unsupported |-| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.031 | – | status was unsupported |-| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.035 | – | status was unsupported |-| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.028 | – | status was unsupported |-| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.009 | – | status was unsupported |-| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 1.466 | – | status was unsupported |-| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.010 | – | status was unsupported |-| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.011 | – | status was unsupported |-| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.007 | – | status was unsupported |-| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.007 | – | status was unsupported |-| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.007 | – | status was unsupported |-| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | – | status was unsupported |-| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.063 | – | status was unsupported |-| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.007 | – | status was unsupported |-| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.032 | – | status was unsupported |-| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.009 | – | status was unsupported |-| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.042 | – | status was unsupported |-| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | **FAIL**: measure Part: the operation failed: not supported yet: tessellation: face 4 (plane): boundary crosses itself (want measurable); body_count 0 (want 1); volume_mm3 0 (want 41716.814693) | 0.068 | – | status was unsupported |-| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.034 | – | status was unsupported |-| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.031 | – | status was unsupported |-| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.032 | – | status was unsupported |-| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.032 | – | status was unsupported |-| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.060 | – | status was unsupported |-| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.094 | – | status was unsupported |-| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.024 | – | status was unsupported |-| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.103 | – | status was unsupported |-| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.016 | – | status was unsupported |-| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.043 | – | status was unsupported |-| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.017 | – | status was unsupported |-| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.020 | – | status was unsupported |-| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.057 | – | status was unsupported |-| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.055 | – | status was unsupported |-| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.013 | – | status was unsupported |-| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.085 | – | status was unsupported |-| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.148 | – | status was unsupported |-| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.010 | – | status was unsupported |-| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.018 | – | status was unsupported |-| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.039 | – | status was unsupported |-| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.059 | – | status was unsupported |-| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.005 | – | status was unsupported |-| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.021 | – | status was unsupported |-| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.034 | – | status was unsupported |-| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.092 | – | status was unsupported |-| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.115 | – | status was unsupported |-| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.212 | – | status was unsupported |-| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | **FAIL**: measure Part: the operation failed: not supported yet: tessellation: face 4 (plane): triangulation does not (want measurable); body_count 0 (want 1); volume_mm3 0 (want 46429.203673) | 0.055 | – | status was unsupported |-| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.062 | – | status was unsupported |-| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.045 | – | status was unsupported |-| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.045 | – | status was unsupported |-| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.038 | – | status was unsupported |-| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.121 | – | status was unsupported |-| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.064 | – | status was unsupported |-| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.073 | – | status was unsupported |-| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.140 | – | status was unsupported |-| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.134 | – | status was unsupported |-| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.244 | – | status was unsupported |-| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.128 | – | status was unsupported |-| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.604 | – | status was unsupported |-| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 1.146 | – | status was unsupported |-| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 1.392 | – | status was unsupported |-| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 2.444 | – | status was unsupported |-| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 2.593 | – | status was unsupported |-| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | **FAIL**: record_valid geometry: portable B-rep: face 25 loop 0 use 1: pcurve middle lifts off its edge's curve by 0.000045 (want ok) | 2.764 | – | status was unsupported |-| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 4.590 | – | status was unsupported |-| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 1.482 | – | status was unsupported |-| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 2.568 | – | status was unsupported |+| ladder/01-primitives/001-box | a 60x40x20 box: the stock every later tier starts from | analytic | pass | 0.002 | 0.002 | |+| ladder/01-primitives/005-sphere | a sphere r10 | analytic | pass | 0.005 | 0.005 | |+| ladder/01-primitives/003-cone | a cone r10 h30 (no cone primitive: a revolved right triangle, its axis a sketch line) | analytic | pass | 0.014 | 0.014 | |+| ladder/01-primitives/004-frustum | a cone frustum r10 -> r5, h20 (revolved trapezoid) | analytic | pass | 0.016 | 0.016 | |+| ladder/01-primitives/002-cylinder | a cylinder r10 h30 | analytic | pass | 0.028 | 0.028 | |+| ladder/01-primitives/006-torus | a torus R20 r5 | analytic | pass | 0.463 | 0.463 | |+| ladder/02-booleans/004-edge-on-edge-no-overlap | a cut tool that shares only the top front edge of the stock | analytic | pass | 0.006 | 0.006 | |+| ladder/02-booleans/016-v-groove-pinches-bottom-to-line | a V groove whose apex touches the bottom face along a line, cut through: two pieces | analytic | pass | 0.007 | 0.007 | |+| ladder/02-booleans/015-knife-edge-wedge-cut | a triangular prism cut whose slope meets the bottom face along one line (a knife edge), its other faces on the stock's | analytic | pass | 0.011 | 0.011 | |+| ladder/02-booleans/001-coincident-face-join | a 60x40x10 box joined exactly on the stock's top face: one 60x40x30 box | analytic | pass | 0.012 | 0.012 | |+| ladder/02-booleans/014-cut-through-sphere-pole | a 4x4 square post cut off the top of a sphere r10 through its pole | analytic | pass | 0.012 | 0.012 | |+| ladder/02-booleans/020-part-back-wall | the running part: a 60x10x15 back wall joined on the stock's top, flush with its back and ends | analytic | pass | 0.013 | 0.013 | |+| ladder/02-booleans/003-pocket-flush-with-top | a 20x20x10 pocket whose tool's top is the stock's top face | analytic | pass | 0.013 | 0.013 | |+| ladder/02-booleans/019-notch-flush-with-end-face | a notch 40x20 through the height, its end flush with the stock's end face: a U | analytic | pass | 0.013 | 0.013 | |+| ladder/02-booleans/002-coplanar-overlap-join | two 60x40x20 boxes overlapping 30x20 in plan, tops and bottoms coplanar | analytic | pass | 0.013 | 0.013 | |+| ladder/02-booleans/008-near-tangent-gap-1e-6 | a cylinder r10 along X 1e-6 mm above the top face, cut | analytic | pass | 0.016 | 0.016 | |+| ladder/02-booleans/010-near-tangent-overlap-1e-6 | a cylinder r10 along X dipping 1e-6 mm into the top face, cut | invariants | pass | 0.016 | 0.016 | |+| ladder/02-booleans/007-near-tangent-gap-1e-3 | a cylinder r10 along X 1e-3 mm above the top face, cut | analytic | pass | 0.019 | 0.019 | |+| ladder/02-booleans/017-cylinder-tangent-top-and-bottom | a cylinder r10 along X tangent to both the top and bottom faces, cut: two pieces with zero-angle cusps | analytic | pass | 0.023 | 0.023 | |+| ladder/02-booleans/006-tangent-along-line-no-overlap | a cylinder r10 along X lying on the top face (tangent along a line), cut | analytic | pass | 0.026 | 0.026 | |+| ladder/02-booleans/018-hole-tangent-to-side-face | a through hole r10 tangent to the front face: the front face pinched to a line | analytic | pass | 0.026 | 0.026 | |+| ladder/02-booleans/009-near-tangent-overlap-1e-3 | a cylinder r10 along X dipping 1e-3 mm into the top face, cut: a groove 1e-3 deep | analytic | pass | 0.030 | 0.030 | |+| ladder/02-booleans/005-vertex-on-face-no-overlap | an inverted cone whose apex touches the middle of the top face, cut | analytic | pass | 0.035 | 0.035 | |+| ladder/02-booleans/011-tangent-along-circle-through-hole | a sphere r10 sitting in a through hole r10 at the top edge (tangent along the hole's top circle), cut | analytic | pass | 0.035 | 0.035 | |+| ladder/02-booleans/013-cut-across-cylinder-seam | a 10x4 notch through a cylinder r10 across its +X side (where the seam lies) | analytic | pass | 0.039 | 0.039 | |+| ladder/02-booleans/012-tangent-along-circle-bowl | a blind hole r10 10 deep, then a sphere r10 centred on its floor: the floor disk vanishes exactly | analytic | pass | 0.043 | 0.043 | |+| ladder/02-booleans/022-cylinder-grazing-a-hole-edge | a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result' | analytic | pass | 0.060 | 0.060 | |+| ladder/02-booleans/021-holes-touching-at-a-point | two through holes r5 whose circles touch at one point (30, 20) | analytic | pass | 0.067 | 0.067 | |+| ladder/02-booleans/023-lips-1e-4-off-the-walls-joined | two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction | analytic | pass | 0.108 | 0.108 | |+| ladder/02-booleans/024-wall-halves-merged-into-a-flange | the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: "the selected planar face no longer exists") | analytic | pass | 0.176 | 0.176 | |+| ladder/02-booleans/025-flush-chord-layers-joined | a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid | analytic | pass | 1.036 | 1.036 | |+| ladder/03-analytic-profiles/006-revolve-partial-90 | a 10x10 rectangle 10 mm off the axis revolved 90 deg | analytic | pass | 0.009 | 0.009 | |+| ladder/03-analytic-profiles/008-extrude-slot | a slot (centres 40 apart, width 20) extruded 10 | analytic | pass | 0.012 | 0.012 | |+| ladder/03-analytic-profiles/001-extrude-rect-with-arc-end | a 60x40 profile with a semicircular end r20, extruded 20 | analytic | pass | 0.014 | 0.014 | |+| ladder/03-analytic-profiles/007-revolve-180-touching-axis | a 15x20 rectangle on the axis revolved 180 deg: a half cylinder | analytic | pass | 0.016 | 0.016 | |+| ladder/03-analytic-profiles/002-extrude-annulus | an annulus r20/r10 extruded 15 | analytic | pass | 0.033 | 0.033 | |+| ladder/03-analytic-profiles/004-revolve-full-off-axis | a 10x30 rectangle 10 mm off the Z axis revolved 360 deg: a tube | analytic | pass | 0.034 | 0.034 | |+| ladder/03-analytic-profiles/003-extrude-tapered-circle | a circle r10 extruded 20 with a -5 deg taper (inward): a cone frustum | analytic | pass | 0.039 | 0.039 | |+| ladder/03-analytic-profiles/009-part-boss-and-slot | the running part: a revolved boss r8 h10 joined on the top, a slot 15x8 cut through the base | analytic | pass | 0.065 | 0.065 | |+| ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere | a quarter disk r20 with an edge on the Z axis revolved 360 deg: a hemisphere | analytic | pass | 0.072 | 0.072 | |+| ladder/03-analytic-profiles/010-revolve-horn-torus-270 | the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees | analytic | pass | 0.074 | 0.074 | |+| ladder/04-spline-profiles/001-extrude-bezier-arch | a profile closed by a cubic Bezier arch (control-point spline, 4 points), extruded 10 | analytic | pass | 0.008 | 0.008 | |+| ladder/04-spline-profiles/005-loft-square-frustum | a loft between a 40 square at z=0 and a 20 square at z=30 | analytic | pass | 0.009 | 0.009 | |+| ladder/04-spline-profiles/008-loft-square-to-circle | a loft from a 40 square at z=0 to a circle r10 at z=30 | invariants | pass | 0.014 | 0.014 | |+| ladder/04-spline-profiles/009-extrude-periodic-fit-spline | a closed periodic fit-point spline through 6 points, extruded 10 | invariants | pass | 0.029 | 0.029 | |+| ladder/04-spline-profiles/006-loft-circle-frustum | a loft between circles r20 at z=0 and r10 at z=30 | analytic | pass | 0.031 | 0.031 | |+| ladder/04-spline-profiles/004-sweep-square-along-bezier | a 4x4 square swept along the same Bezier path | analytic | pass | 0.037 | 0.037 | |+| ladder/04-spline-profiles/007-loft-three-circles | a smooth loft through circles r20, r10, r20 at z = 0, 20, 40 | invariants | pass | 0.039 | 0.039 | |+| ladder/04-spline-profiles/003-pipe-along-bezier | a pipe d4 along a planar Bezier path | analytic | pass | 0.079 | 0.079 | |+| ladder/04-spline-profiles/002-revolve-bezier-profile | a profile with a Bezier side (r from 20 to 15 over z 0..30) revolved 360 deg about Z | analytic | pass | 0.081 | 0.081 | |+| ladder/04-spline-profiles/010-part-bezier-window | the running part: a Bezier-arched window cut through the back wall | analytic | pass | 0.095 | 0.095 | |+| ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad | the same without the top flange: the join fails with 'boolean Union: no result' | invariants | pass | 0.499 | 0.499 | |+| ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined | a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result | invariants | pass | 1.130 | 1.130 | |+| ladder/05-holes-and-taps/006-tapped-m6-through | an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread | analytic | pass | 0.017 | 0.017 | |+| ladder/05-holes-and-taps/009-hole-0.5-from-edge | a d10 through hole whose wall is 0.5 mm from the end face | analytic | pass | 0.018 | 0.018 | |+| ladder/05-holes-and-taps/010-hole-tangent-to-end-face | a d10 through hole tangent to the end face x=0 | analytic | pass | 0.019 | 0.019 | |+| ladder/05-holes-and-taps/003-drilled-blind-118 | a d10 drilled hole 10 deep to the shoulder with a 118 deg point | analytic | pass | 0.023 | 0.023 | |+| ladder/05-holes-and-taps/007-tapped-m8-blind | an M8 tapped blind hole 12 deep with a 118 deg drill point | analytic | pass | 0.024 | 0.024 | |+| ladder/05-holes-and-taps/002-simple-blind-flat | a d10 blind hole 10 deep, flat bottom | analytic | pass | 0.025 | 0.025 | |+| ladder/05-holes-and-taps/001-simple-through | a d10 through hole in the stock's top | analytic | pass | 0.030 | 0.030 | |+| ladder/05-holes-and-taps/004-counterbore | a counterbored hole: d6.6 through, d11 x 6.4 counterbore | analytic | pass | 0.049 | 0.049 | |+| ladder/05-holes-and-taps/005-countersink | a countersunk hole: d6.6 through, d12 x 90 deg countersink | analytic | pass | 0.061 | 0.061 | |+| ladder/05-holes-and-taps/011-crossing-holes-steinmetz | two d10 through holes whose axes cross: vertical and along Y at z=10 | analytic | pass | 0.064 | 0.064 | |+| ladder/05-holes-and-taps/008-tapped-m5-into-curved-face | an M5 tapped hole drilled radially through a cylinder r20 lying along X | analytic | pass | 0.068 | 0.068 | |+| ladder/05-holes-and-taps/012-crossing-tapped-holes-offset | two M6 tapped holes (d5) crossing with axes 2 mm apart | analytic | pass | 0.072 | 0.072 | |+| ladder/05-holes-and-taps/013-part-holes | the running part: an M6 tapped through hole, an M5 tapped blind hole in the boss, a d3.3 hole down through wall and base | analytic | pass | 0.235 | 0.235 | |+| ladder/06-threads/003-external-m10-partial-length | a modelled M10 thread over 15 of the 30 mm: it stops square in the middle of the face | invariants | pass | 0.622 | 0.622 | |+| ladder/06-threads/010-part-threaded-boss | the running part with a modelled M16 thread on its d16 boss | invariants | pass | 0.660 | 0.660 | |+| ladder/06-threads/005-internal-m10-through | a modelled internal M10 thread in a d8.5 (tap drill) hole through a 30x30x20 block | analytic | pass | 0.726 | 0.726 | |+| ladder/06-threads/004-external-m10-to-shoulder | a modelled M10 thread on a d10 shaft running down to a d16 shoulder | invariants | pass | 1.219 | 1.219 | |+| ladder/06-threads/007-external-m10-at-filleted-shoulder | a modelled M10 thread on a d10 shaft whose root at the d16 shoulder has an r1 fillet | invariants | pass | 1.231 | 1.231 | |+| ladder/06-threads/001-external-m10-full | a modelled M10 thread over the whole of a d10 x 30 cylinder | analytic | pass | 1.337 | 1.337 | |+| ladder/06-threads/006-external-m10-into-chamfer | a d10 x 30 cylinder with a 1 mm chamfer on top, then a modelled M10 thread over its cylinder face, running out through the chamfer | analytic | pass | 1.390 | 1.390 | |+| ladder/06-threads/002-external-m10x1-fine | a modelled fine M10x1 thread over a d10 x 30 cylinder | analytic | pass | 2.362 | 2.362 | || ladder/06-threads/008-multi-start-thread | a two-start M10 thread (lead 3, pitch 1.5) | invariants | not supported yet: solid.thread has no start count: multi-start threads | – | – | || ladder/06-threads/009-thread-runout-length | an M10 thread that vanishes over a 2-pitch runout before a shoulder | invariants | not supported yet: solid.thread has no runout (vanishing thread) length | – | – | |-| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.018 | – | status was unsupported |-| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.018 | – | status was unsupported |-| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | – | status was unsupported |-| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.005 | – | |-| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | – | status was unsupported |-| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.025 | – | status was unsupported |-| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.012 | – | status was unsupported |-| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | **FAIL**: step 3 (solid.fillet): SMLib variable fillet: operation: SMLib failed (status 1001) | 0.020 | – | status was unsupported |-| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.113 | – | status was unsupported |-| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.017 | – | status was unsupported |-| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.028 | – | status was unsupported |-| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.025 | – | status was unsupported |-| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.042 | – | status was unsupported |-| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.090 | – | status was unsupported |-| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.051 | – | status was unsupported |-| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.986 | – | status was unsupported |+| ladder/07-fillets/015-corner-g2-patch | three r5 rounds at a corner with the g2 corner patch | invariants | not supported yet: step 2 (solid.fillet): invalid input: not supported yet: a fillet with G2 corner patches with the SMLib kernel | 0.003 | 0.003 | |+| ladder/07-fillets/001-single-edge-r5 | an r5 round on the stock's top front edge | analytic | pass | 0.007 | 0.007 | |+| ladder/07-fillets/006-variable-r5-to-zero | a variable round on the top front edge, r5 at x=0 down to 0 at the x=60 vertex | analytic | pass | 0.009 | 0.009 | |+| ladder/07-fillets/011-chain-ending-at-corner | r5 rounds on two top edges meeting at a corner whose vertical edge stays sharp | invariants | pass | 0.010 | 0.010 | |+| ladder/07-fillets/005-variable-r5-to-r1 | a variable round on the top front edge, r5 at x=0 to r1 at x=60 | analytic | pass | 0.011 | 0.011 | |+| ladder/07-fillets/009-corner-three-equal-r5 | r5 rounds on the three edges meeting at the corner (60,40,20): a sphere corner | analytic | pass | 0.012 | 0.012 | |+| ladder/07-fillets/008-constant-r1e-3 | a constant 1e-3 mm round on the top front edge | analytic | pass | 0.012 | 0.012 | |+| ladder/07-fillets/002-four-vertical-edges-r5 | r5 rounds on the four vertical edges | analytic | pass | 0.014 | 0.014 | |+| ladder/07-fillets/007-variable-r5-to-1e-3 | a variable round on the top front edge, r5 down to 1e-3 mm | analytic | pass | 0.018 | 0.018 | |+| ladder/07-fillets/010-corner-unequal-r7-r3 | an r7 vertical round at a corner, then r3 along a top edge, which runs on round the r7 arc to the other top edge | invariants | pass | 0.019 | 0.019 | |+| ladder/07-fillets/004-convex-and-concave-r5 | an L block: r5 on its inner (concave) vertical edge and on an outer (convex) one | analytic | pass | 0.020 | 0.020 | |+| ladder/07-fillets/016-corner-three-sequential-r5-r3-r7 | rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them | invariants | **FAIL**: step 4 (solid.fillet): SMLib fillet: operation: SMLib failed (status 1001) | 0.026 | 0.026 | |+| ladder/07-fillets/012-variable-into-rounded-corner | a vertical r5 round, then a variable round r1 -> r5 along the top back edge into it | invariants | pass | 0.030 | 0.030 | |+| ladder/07-fillets/014-curved-edge-r2 | an r2 round on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |+| ladder/07-fillets/003-tangent-chain-r3 | an r3 round all round the top of the box with r5 vertical rounds: a tangent chain of lines and arcs | analytic | pass | 0.044 | 0.044 | |+| ladder/07-fillets/017-part-rounds | the running part: r5 on the front vertical edges, r3 on the back wall's top front edge, r1 where the boss meets the top | analytic | pass | 0.389 | 0.389 | || ladder/07-fillets/013-corner-setback | three r5 rounds at a corner with setbacks of 8 mm along each edge | invariants | not supported yet: solid.fillet has no corner setback distances | – | – | |-| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.009 | – | status was unsupported |-| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.010 | – | status was unsupported |-| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.010 | – | status was unsupported |-| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.014 | – | status was unsupported |-| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.015 | – | status was unsupported |-| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.029 | – | status was unsupported |-| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.117 | – | status was unsupported |-| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.999 | – | status was unsupported |-| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.016 | – | status was unsupported |-| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.017 | – | status was unsupported |-| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.021 | – | status was unsupported |-| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.015 | – | status was unsupported |-| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.044 | – | status was unsupported |-| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.155 | – | status was unsupported |-| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.160 | – | status was unsupported |-| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.063 | – | status was unsupported |-| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.164 | – | status was unsupported |-| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | **FAIL**: step 3 (solid.shell): SMLib shell: SMLib's check refuses the result: 1 failed tests: SmBSplineCurve::Test #13 Bad CurveCusp: 2D BSplineCurve Warning: Extremely | 0.179 | – | status was unsupported |-| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.998 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.037 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.126 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.138 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.572 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.836 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 1.322 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 2.310 | – | status was unsupported |-| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.978 | – | status was unsupported |-| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | **FAIL**: step 7 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 1.244 | – | status was unsupported |-| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.153 | – | status was unsupported |-| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | **FAIL**: step 7 (solid.chamfer): SMLib chamfer: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 1.171 | – | status was unsupported |-| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | **FAIL**: step 21 (solid.fillet): SMLib fillet: operation: SMLib rejected the input (SM_ERR_INVALID_INPUT) | 0.913 | – | status was unsupported |+| ladder/08-chamfers/003-distance-angle-5-30 | a chamfer 5 mm at 30 deg on the top front edge | analytic | pass | 0.006 | 0.006 | |+| ladder/08-chamfers/002-two-distances-5-3 | a 5 x 3 chamfer on the top front edge | analytic | pass | 0.007 | 0.007 | |+| ladder/08-chamfers/005-corner-two-mitred-3 | 3 mm chamfers on two top edges meeting at a corner (mitred) | analytic | pass | 0.008 | 0.008 | |+| ladder/08-chamfers/004-corner-three-equal-3 | 3 mm chamfers on the three edges meeting at a corner | analytic | pass | 0.010 | 0.010 | |+| ladder/08-chamfers/001-equal-5 | a 5 mm chamfer on the top front edge | analytic | pass | 0.012 | 0.012 | |+| ladder/08-chamfers/007-chamfer-then-fillets | a 3 mm chamfer on the top front edge, then r2 rounds on the front vertical edges that meet it | invariants | pass | 0.027 | 0.027 | |+| ladder/08-chamfers/006-curved-edge-2 | a 2 mm chamfer on the top edge of a cylinder r10 h20 | analytic | pass | 0.040 | 0.040 | |+| ladder/08-chamfers/008-part-chamfers | the running part: 1 mm on the boss top edge, 2 mm on the back wall's top back edge | analytic | pass | 0.519 | 0.519 | |+| ladder/09-shells-and-offsets/012-closed-shell-sealed-void | the stock shelled 2 mm with no face open: a closed body with a sealed void | analytic | pass | 0.009 | 0.009 | |+| ladder/09-shells-and-offsets/001-box-open-top-t2 | the stock shelled 2 mm, open at the top | analytic | pass | 0.009 | 0.009 | |+| ladder/09-shells-and-offsets/003-tube-two-open-faces | the stock shelled 2 mm, open top and bottom | analytic | pass | 0.009 | 0.009 | |+| ladder/09-shells-and-offsets/004-thin-wall-0.2 | the stock shelled 0.2 mm, open at the top | analytic | pass | 0.017 | 0.017 | |+| ladder/09-shells-and-offsets/007-offset-top-face-5 | the stock's top face offset 5 mm | analytic | pass | 0.017 | 0.017 | |+| ladder/09-shells-and-offsets/009-shell-outside-t2 | the stock shelled 2 mm outward, open at the top | analytic | pass | 0.031 | 0.031 | |+| ladder/09-shells-and-offsets/008-offset-cylinder-wall-2 | a cylinder r10 h20 with its side face offset 2 mm | analytic | pass | 0.040 | 0.040 | |+| ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2 | the box with r1 vertical rounds shelled 2 mm: the inner corners close sharp | analytic | pass | 0.042 | 0.042 | |+| ladder/09-shells-and-offsets/002-cylinder-open-top-t1 | a cylinder r10 h30 shelled 1 mm, open at the top | analytic | pass | 0.054 | 0.054 | |+| ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled | a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design) | invariants | pass | 0.090 | 0.090 | |+| ladder/09-shells-and-offsets/010-shell-under-rounded-top | the stock with r3 rounds on its four top edges, shelled 2 mm open at the bottom | invariants | pass | 0.090 | 0.090 | |+| ladder/09-shells-and-offsets/005-shell-rounds-r5-t2 | the box with r5 vertical rounds shelled 2 mm open at the top: the inner corners r3 | analytic | pass | 0.098 | 0.098 | |+| ladder/09-shells-and-offsets/013-dome-shelled-from-base | a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane | analytic | pass | 0.123 | 0.123 | |+| ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back | a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result' | analytic | pass | 0.692 | 0.692 | |+| ladder/09-shells-and-offsets/011-part-shell | the running part shelled 1.5 mm open at the bottom | invariants | pass | 0.868 | 0.868 | |+| ladder/10-patterns-and-mirrors/007-pattern-bodies | a pin r3 h10 patterned 4 times at 10 mm as bodies | analytic | pass | 0.017 | 0.017 | |+| ladder/10-patterns-and-mirrors/004-mirror-body-joined | a 30x40x20 half with a d10 hole mirrored about x=30 and joined: the faces at x=30 coincide | analytic | pass | 0.036 | 0.036 | |+| ladder/10-patterns-and-mirrors/005-mirror-feature | a d10 hole in the stock mirrored about x=30 as a feature | analytic | pass | 0.039 | 0.039 | |+| ladder/10-patterns-and-mirrors/001-rect-pattern-holes | a d5 hole patterned 3 x 2 at 20 mm in a 60x40x10 plate | analytic | pass | 0.155 | 0.155 | |+| ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core | six r5 cuts patterned round a circle r6 in a disk r20: they overlap and cut a core free | analytic | pass | 0.244 | 0.244 | |+| ladder/10-patterns-and-mirrors/002-circular-pattern-holes | a d6 hole patterned 8 times round a disk r30 h10 | analytic | pass | 0.353 | 0.353 | |+| ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores | a counterbored hole (d5, d9 x 3) patterned 6 times round a disk r30 h10 | analytic | pass | 0.670 | 0.670 | |+| ladder/10-patterns-and-mirrors/008-part-vents | the running part with a d3 vent hole in its top patterned 4 times at 5 mm | invariants | pass | 1.469 | 1.469 | |+| ladder/11-cumulative-parts/001-bracket | an L bracket: concave r5 round, 5 mm outer chamfer, a hole in each leg | analytic | pass | 0.071 | 0.071 | |+| ladder/11-cumulative-parts/002-flange | a revolved flange and hub with a bore, six bolt holes, a hub chamfer and a hub-root round | analytic | pass | 0.503 | 0.503 | |+| ladder/11-cumulative-parts/003-threaded-flange | the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk | invariants | pass | 1.769 | 1.769 | |+| ladder/11-cumulative-parts/004-housing | the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss | invariants | pass | 2.096 | 2.096 | |diff --git a/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.json b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.jsonnew file mode 100644index 0000000000..1cb77a6051--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "two through holes r5 whose circles touch at one point (30, 20)",+ "source": "analytic",+ "method": "V = 60 40 20 - 2 pi 5^2 20; faces: 6 of the box + 2 bores (top and bottom each one loop round both holes, through their common vertex twice)",+ "body_count": 1,+ "volume_mm3": 44858.407346410204,+ "faces": 8+}diff --git a/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.json b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.jsonnew file mode 100644index 0000000000..4f9583a379--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/021-holes-touching-at-a-point/recipe.json@@ -0,0 +1,31 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "base": [+ 25,+ 20,+ -1+ ],+ "radius": 5,+ "height": 22,+ "operation": "cut"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "base": [+ 35,+ 20,+ -1+ ],+ "radius": 5,+ "height": 22,+ "operation": "cut"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.json b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.jsonnew file mode 100644index 0000000000..14b3f374c2--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1279"+ ],+ "what": "a corner piece (square column minus a quarter disc r1.5, 0.0003 off the axis) cut out of a part with a blind r1.6 hole on the same axis: the tool's r1.5 face sits 0.1 mm inside the hole wall; 'no result'",+ "source": "analytic",+ "method": "part 12x12x5.1 = 734.4 minus the hole pi*1.6^2*4.1 = 32.97 (hole z -4..0.1, part top z 0.1). The tool (z -3.9..3.2, the square 1.5x1.5 where r >= 1.5) overlaps solid only where r >= 1.6: area A1 = integral_0^1.5 (1.5 - min(1.5, sqrt(2.56-x^2))) dx = 0.31409, over the 4.0 mm of shared z: 1.25638 mm3 (the 0.0003 offset moves this by about 3e-3). V = 734.4 - 32.9662 - 1.2564 = 700.1695. Reduced from the report's STEP geometry (no pocket or rotation); the answer is for this geometry",+ "body_count": 1,+ "volume_mm3": 700.1694662079215+}diff --git a/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.json b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.jsonnew file mode 100644index 0000000000..a47186fda1--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/022-cylinder-grazing-a-hole-edge/recipe.json@@ -0,0 +1,72 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -6,+ -6,+ -5+ ],+ "length": 12,+ "width": 12,+ "height": 5.1,+ "body_name": "Part"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "base": [+ 0,+ 0,+ -4+ ],+ "radius": 1.6,+ "height": 4.1,+ "operation": "cut"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ -3.9+ ],+ "length": 1.5,+ "width": 1.5,+ "height": 7.1,+ "operation": "new",+ "body_name": "Tool"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "base": [+ 0.0003,+ 0,+ -4+ ],+ "radius": 1.5,+ "height": 7.5,+ "operation": "cut",+ "targets": [+ "Tool"+ ]+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Part",+ "tools": [+ "Tool"+ ],+ "operation": "cut"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.json b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.jsonnew file mode 100644index 0000000000..6f05969b53--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#2928"+ ],+ "what": "two half-annulus lips (r 4..5, from z=2 to 20) joined onto a stadium-ring base (z 0..2, r 3..5 arcs, centres 20 apart) with their cylinder walls 0.0001 mm off the base's: the lip cap touches the base top, leaving a 0.0001 mm crescent overhang. Layout is a hand-built variant of the PR's public reproduction",+ "source": "analytic",+ "method": "base area = 2 straight rails (2 x 20) x 2 + full annulus pi(25-9) = 80 + 16 pi, times 2 mm = 160 + 32 pi. Each lip is a half annulus pi(25-16)/2 = 4.5 pi, two lips x 18 mm = 162 pi. The lips sit above z=2, the base is below, so nothing overlaps (the crescent overhang is above z=2 too): V = 160 + 194 pi = 769.469. One body",+ "body_count": 1,+ "volume_mm3": 769.4689747964198+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.json b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.jsonnew file mode 100644index 0000000000..defab27cd8--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/023-lips-1e-4-off-the-walls-joined/recipe.json@@ -0,0 +1,285 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 5,+ -10+ ],+ [+ 5,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ 10+ ],+ "start": [+ 5,+ 10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -5,+ 10+ ],+ [+ -5,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ -10+ ],+ "start": [+ -5,+ -10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 3,+ -10+ ],+ [+ 3,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ 10+ ],+ "start": [+ 3,+ 10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -3,+ 10+ ],+ [+ -3,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ -10+ ],+ "start": [+ -3,+ -10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Base",+ "profiles": [+ {+ "point": [+ 4,+ 0+ ]+ }+ ],+ "distance": 2,+ "operation": "new",+ "body_name": "Base"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": 2,+ "name": "Lips"+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0.0001,+ 10+ ],+ "start": [+ 5.0001,+ 10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -4.9999,+ 10+ ],+ [+ -3.9999,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0.0001,+ 10+ ],+ "start": [+ -3.9999,+ 10+ ],+ "sweep": -180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 4.0001,+ 10+ ],+ [+ 5.0001,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ -0.0001,+ -10+ ],+ "start": [+ -5.0001,+ -10+ ],+ "sweep": 180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 4.9999,+ -10+ ],+ [+ 3.9999,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ -0.0001,+ -10+ ],+ "start": [+ 3.9999,+ -10+ ],+ "sweep": -180+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -4.0001,+ -10+ ],+ [+ -5.0001,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Lips",+ "distance": 18,+ "operation": "join",+ "profiles": "all"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.json b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.jsonnew file mode 100644index 0000000000..ae9e520510--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#726",+ "tangency-labs/solidcraft#494",+ "tangency-labs/solidcraft#2114"+ ],+ "what": "the flange top annulus of a freshly revolved hub (z = 6, r 18..30) picked by a point and extruded 5 mm (the pick found a third of the face: \"the selected planar face no longer exists\")",+ "source": "analytic",+ "method": "hub = revolve of (8,0) (30,0) (30,6) (18,6) (18,22) (8,22) about Z: V = pi [(30^2 - 8^2) 6 + (18^2 - 8^2) 16] = 28826.6. Extruding the whole annulus z = 6, r 18..30 outward (upward) 5 mm adds pi (30^2 - 18^2) 5 = 9047.8 (the new ring sits on the flange and touches the hub wall r = 18).",+ "body_count": 1,+ "volume_mm3": 37875.04103167855+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.json b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.jsonnew file mode 100644index 0000000000..ffb458854f--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/024-wall-halves-merged-into-a-flange/recipe.json@@ -0,0 +1,85 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "P"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8,+ 0+ ],+ [+ 30,+ 0+ ],+ [+ 30,+ 6+ ],+ [+ 18,+ 6+ ],+ [+ 18,+ 22+ ],+ [+ 8,+ 22+ ]+ ],+ "infer": false,+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": "Z",+ "angle": "360 deg",+ "operation": "new",+ "body_name": "Hub"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 12,+ 20.784609690826528,+ 6+ ],+ "distance": 5,+ "operation": "join"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.json b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.jsonnew file mode 100644index 0000000000..7a99b89cd1--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#5197",+ "tangency-labs/solidcraft#3396"+ ],+ "what": "a join of flush layers: a disc r37 (z -1.2..0) carrying 15 of the 19 regions of a sketch of 18 chords (z -3.6..-1.2; four bands left out), on an annulus r35..37 (z -5.6..-3.6) joined to a disc of all the chord regions (z -8..-5.6): SMLib's result came back with 'loop encloses no (u, v) area' though both operands are valid",+ "source": "analytic",+ "method": "the layers only meet face to face, so V is their sum: Body1 = pi 37^2 1.2 + (pi 37^2 - the four bands y -29..-24, -13..-8, 8..11, 24..27 of the disc, Int 2 sqrt(37^2 - y^2) dy) 2.4; Body2 = pi (37^2-35^2) 2; Body3 = pi 37^2 2.4. The bands run out to the rim, so the space inside r35 under Body1 opens to the outside: one shell (the reporter's 52-command script, generic dimensions)",+ "body_count": 1,+ "shells": 1,+ "volume_mm3": 24340.9358+}diff --git a/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.json b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.jsonnew file mode 100644index 0000000000..246440cc44--- /dev/null+++ b/tests/kernel-cases/ladder/02-booleans/025-flush-chord-layers-joined/recipe.json@@ -0,0 +1,792 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "S1"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ -32+ ],+ [+ 18.57417562100671,+ -32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -22.978250586152114,+ -29+ ],+ [+ 22.978250586152114,+ -29+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ -24+ ],+ [+ 28.160255680657446,+ -24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -30.463092423455635,+ -21+ ],+ [+ 30.463092423455635,+ -21+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ -16+ ],+ [+ 33.36165463522455,+ -16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -34.64101615137755,+ -13+ ],+ [+ 34.64101615137755,+ -13+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ -8+ ],+ [+ 36.124783736376884,+ -8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.66060555964672,+ -5+ ],+ [+ 36.66060555964672,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -37.0,+ 0+ ],+ [+ 37.0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.87817782917155,+ 3+ ],+ [+ 36.87817782917155,+ 3+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ 8+ ],+ [+ 36.124783736376884,+ 8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -35.32704346531139,+ 11+ ],+ [+ 35.32704346531139,+ 11+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ 16+ ],+ [+ 33.36165463522455,+ 16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -31.74901573277509,+ 19+ ],+ [+ 31.74901573277509,+ 19+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ 24+ ],+ [+ 28.160255680657446,+ 24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -25.298221281347036,+ 27+ ],+ [+ 25.298221281347036,+ 27+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ 32+ ],+ [+ 18.57417562100671,+ 32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -12.0,+ 35+ ],+ [+ 12.0,+ 35+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "S3"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ -32+ ],+ [+ 18.57417562100671,+ -32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -22.978250586152114,+ -29+ ],+ [+ 22.978250586152114,+ -29+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ -24+ ],+ [+ 28.160255680657446,+ -24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -30.463092423455635,+ -21+ ],+ [+ 30.463092423455635,+ -21+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ -16+ ],+ [+ 33.36165463522455,+ -16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -34.64101615137755,+ -13+ ],+ [+ 34.64101615137755,+ -13+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ -8+ ],+ [+ 36.124783736376884,+ -8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.66060555964672,+ -5+ ],+ [+ 36.66060555964672,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -37.0,+ 0+ ],+ [+ 37.0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.87817782917155,+ 3+ ],+ [+ 36.87817782917155,+ 3+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -36.124783736376884,+ 8+ ],+ [+ 36.124783736376884,+ 8+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -35.32704346531139,+ 11+ ],+ [+ 35.32704346531139,+ 11+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -33.36165463522455,+ 16+ ],+ [+ 33.36165463522455,+ 16+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -31.74901573277509,+ 19+ ],+ [+ 31.74901573277509,+ 19+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -28.160255680657446,+ 24+ ],+ [+ 28.160255680657446,+ 24+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -25.298221281347036,+ 27+ ],+ [+ 25.298221281347036,+ 27+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -18.57417562100671,+ 32+ ],+ [+ 18.57417562100671,+ 32+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -12.0,+ 35+ ],+ [+ 12.0,+ 35+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Rings"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 37+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 35+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Rings",+ "profiles": "all",+ "distance": 1.2,+ "direction": "negative",+ "body_name": "Body1"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "S1",+ "profiles": [+ {+ "point": [+ 0,+ -34.5+ ]+ },+ {+ "point": [+ 0,+ -30.5+ ]+ },+ {+ "point": [+ 0,+ -22.5+ ]+ },+ {+ "point": [+ 0,+ -18.5+ ]+ },+ {+ "point": [+ 0,+ -14.5+ ]+ },+ {+ "point": [+ 0,+ -6.5+ ]+ },+ {+ "point": [+ 0,+ -2.5+ ]+ },+ {+ "point": [+ 0,+ 1.5+ ]+ },+ {+ "point": [+ 0,+ 5.5+ ]+ },+ {+ "point": [+ 0,+ 13.5+ ]+ },+ {+ "point": [+ 0,+ 17.5+ ]+ },+ {+ "point": [+ 0,+ 21.5+ ]+ },+ {+ "point": [+ 0,+ 29.5+ ]+ },+ {+ "point": [+ 0,+ 33.5+ ]+ },+ {+ "point": [+ 0,+ 36.0+ ]+ }+ ],+ "distance": 2.4,+ "direction": "negative",+ "from": [+ 0,+ 0,+ -1.2+ ],+ "operation": "join"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Rings",+ "profiles": [+ {+ "point": [+ 36,+ 0+ ]+ }+ ],+ "distance": 2,+ "direction": "negative",+ "from": [+ 36,+ 0,+ -3.6+ ],+ "operation": "new",+ "body_name": "Body2"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "S3",+ "profiles": "all",+ "distance": 2.4,+ "direction": "negative",+ "from": [+ 36,+ 0,+ -5.6+ ],+ "operation": "new",+ "body_name": "Body3"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Body2",+ "tools": [+ "Body3"+ ],+ "operation": "join"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Body1",+ "tools": [+ "Body2"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.json b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.jsonnew file mode 100644index 0000000000..b9b665fb65--- /dev/null+++ b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4007"+ ],+ "what": "the half disc of radius 14 on the far side of a diameter 14 mm from the axis (the full circle would touch the axis: a horn torus) revolved 270 degrees",+ "source": "analytic",+ "method": "Pappus: the half disc (the side away from the axis) has area pi 14^2 / 2 and centroid at 14 + 4 * 14 / (3 pi) from the axis: V = (270/360) 2 pi (14 + 4*14/(3 pi)) pi 14^2 / 2 = 28932.2 (the design measures 28930.7).",+ "body_count": 1,+ "volume_mm3": 28932.17609889229+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.json b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.jsonnew file mode 100644index 0000000000..42b612d7ae--- /dev/null+++ b/tests/kernel-cases/ladder/03-analytic-profiles/010-revolve-horn-torus-270/recipe.json@@ -0,0 +1,72 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "P"+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 14,+ 0+ ],+ "start": [+ 14,+ -14+ ],+ "end": [+ 14,+ 14+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14,+ 14+ ],+ [+ 14,+ -14+ ]+ ],+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": "Z",+ "angle": "270 deg",+ "operation": "new"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.json b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.jsonnew file mode 100644index 0000000000..f44f64de6a--- /dev/null+++ b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#4623",+ "tangency-labs/solidcraft#4180",+ "tangency-labs/solidcraft#4881"+ ],+ "what": "a join of two pleated skins (lofts between 24-pleat star outlines, less the same loft moved in 1.1 mm) that cross along a ring near their bottoms: truck panicked ('tolerance must be no less than 1e-6') or gave no result",+ "source": "invariants",+ "method": "the narrowing cone skin and the flaring lip skin cross at z = -0.3, so their union is one connected solid: one valid closed body, no panic. The reporter's own script (pleated_union.py, 24 pleats)",+ "body_count": 1+}diff --git a/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.json b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.jsonnew file mode 100644index 0000000000..080ca8c3be--- /dev/null+++ b/tests/kernel-cases/ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined/recipe.json@@ -0,0 +1,1802 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "-1",+ "name": "ConeLo"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 115.7949,+ 0.0+ ],+ [+ 112.5082,+ 14.812+ ],+ [+ 111.8493,+ 29.9699+ ],+ [+ 104.8409,+ 43.4265+ ],+ [+ 100.2813,+ 57.8974+ ],+ [+ 90.0289,+ 69.0816+ ],+ [+ 81.8793,+ 81.8793+ ],+ [+ 69.0816,+ 90.0289+ ],+ [+ 57.8974,+ 100.2813+ ],+ [+ 43.4265,+ 104.8409+ ],+ [+ 29.9699,+ 111.8493+ ],+ [+ 14.812,+ 112.5082+ ],+ [+ 0.0,+ 115.7949+ ],+ [+ -14.812,+ 112.5082+ ],+ [+ -29.9699,+ 111.8493+ ],+ [+ -43.4265,+ 104.8409+ ],+ [+ -57.8974,+ 100.2813+ ],+ [+ -69.0816,+ 90.0289+ ],+ [+ -81.8793,+ 81.8793+ ],+ [+ -90.0289,+ 69.0816+ ],+ [+ -100.2813,+ 57.8974+ ],+ [+ -104.8409,+ 43.4265+ ],+ [+ -111.8493,+ 29.9699+ ],+ [+ -112.5082,+ 14.812+ ],+ [+ -115.7949,+ 0.0+ ],+ [+ -112.5082,+ -14.812+ ],+ [+ -111.8493,+ -29.9699+ ],+ [+ -104.8409,+ -43.4265+ ],+ [+ -100.2813,+ -57.8974+ ],+ [+ -90.0289,+ -69.0816+ ],+ [+ -81.8793,+ -81.8793+ ],+ [+ -69.0816,+ -90.0289+ ],+ [+ -57.8974,+ -100.2813+ ],+ [+ -43.4265,+ -104.8409+ ],+ [+ -29.9699,+ -111.8493+ ],+ [+ -14.812,+ -112.5082+ ],+ [+ -0.0,+ -115.7949+ ],+ [+ 14.812,+ -112.5082+ ],+ [+ 29.9699,+ -111.8493+ ],+ [+ 43.4265,+ -104.8409+ ],+ [+ 57.8974,+ -100.2813+ ],+ [+ 69.0816,+ -90.0289+ ],+ [+ 81.8793,+ -81.8793+ ],+ [+ 90.0289,+ -69.0816+ ],+ [+ 100.2813,+ -57.8974+ ],+ [+ 104.8409,+ -43.4265+ ],+ [+ 111.8493,+ -29.9699+ ],+ [+ 112.5082,+ -14.812+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "88.3",+ "name": "ConeHi"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.39,+ 0.0+ ],+ [+ 13.9816,+ 1.8407+ ],+ [+ 13.8997,+ 3.7244+ ],+ [+ 13.0287,+ 5.3967+ ],+ [+ 12.4621,+ 7.195+ ],+ [+ 11.188,+ 8.5849+ ],+ [+ 10.1753,+ 10.1753+ ],+ [+ 8.5849,+ 11.188+ ],+ [+ 7.195,+ 12.4621+ ],+ [+ 5.3967,+ 13.0287+ ],+ [+ 3.7244,+ 13.8997+ ],+ [+ 1.8407,+ 13.9816+ ],+ [+ 0.0,+ 14.39+ ],+ [+ -1.8407,+ 13.9816+ ],+ [+ -3.7244,+ 13.8997+ ],+ [+ -5.3967,+ 13.0287+ ],+ [+ -7.195,+ 12.4621+ ],+ [+ -8.5849,+ 11.188+ ],+ [+ -10.1753,+ 10.1753+ ],+ [+ -11.188,+ 8.5849+ ],+ [+ -12.4621,+ 7.195+ ],+ [+ -13.0287,+ 5.3967+ ],+ [+ -13.8997,+ 3.7244+ ],+ [+ -13.9816,+ 1.8407+ ],+ [+ -14.39,+ 0.0+ ],+ [+ -13.9816,+ -1.8407+ ],+ [+ -13.8997,+ -3.7244+ ],+ [+ -13.0287,+ -5.3967+ ],+ [+ -12.4621,+ -7.195+ ],+ [+ -11.188,+ -8.5849+ ],+ [+ -10.1753,+ -10.1753+ ],+ [+ -8.5849,+ -11.188+ ],+ [+ -7.195,+ -12.4621+ ],+ [+ -5.3967,+ -13.0287+ ],+ [+ -3.7244,+ -13.8997+ ],+ [+ -1.8407,+ -13.9816+ ],+ [+ -0.0,+ -14.39+ ],+ [+ 1.8407,+ -13.9816+ ],+ [+ 3.7244,+ -13.8997+ ],+ [+ 5.3967,+ -13.0287+ ],+ [+ 7.195,+ -12.4621+ ],+ [+ 8.5849,+ -11.188+ ],+ [+ 10.1753,+ -10.1753+ ],+ [+ 11.188,+ -8.5849+ ],+ [+ 12.4621,+ -7.195+ ],+ [+ 13.0287,+ -5.3967+ ],+ [+ 13.8997,+ -3.7244+ ],+ [+ 13.9816,+ -1.8407+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "ConeLo"+ },+ {+ "sketch": "ConeHi"+ }+ ],+ "operation": "new",+ "body_name": "Cone",+ "name": "Cone"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "-2",+ "name": "ConeInLo"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 115.8304,+ 0.0+ ],+ [+ 112.5209,+ 14.8137+ ],+ [+ 111.8836,+ 29.9791+ ],+ [+ 104.8528,+ 43.4314+ ],+ [+ 100.3121,+ 57.9152+ ],+ [+ 90.0391,+ 69.0894+ ],+ [+ 81.9045,+ 81.9045+ ],+ [+ 69.0894,+ 90.0391+ ],+ [+ 57.9152,+ 100.3121+ ],+ [+ 43.4314,+ 104.8528+ ],+ [+ 29.9791,+ 111.8836+ ],+ [+ 14.8137,+ 112.5209+ ],+ [+ 0.0,+ 115.8304+ ],+ [+ -14.8137,+ 112.5209+ ],+ [+ -29.9791,+ 111.8836+ ],+ [+ -43.4314,+ 104.8528+ ],+ [+ -57.9152,+ 100.3121+ ],+ [+ -69.0894,+ 90.0391+ ],+ [+ -81.9045,+ 81.9045+ ],+ [+ -90.0391,+ 69.0894+ ],+ [+ -100.3121,+ 57.9152+ ],+ [+ -104.8528,+ 43.4314+ ],+ [+ -111.8836,+ 29.9791+ ],+ [+ -112.5209,+ 14.8137+ ],+ [+ -115.8304,+ 0.0+ ],+ [+ -112.5209,+ -14.8137+ ],+ [+ -111.8836,+ -29.9791+ ],+ [+ -104.8528,+ -43.4314+ ],+ [+ -100.3121,+ -57.9152+ ],+ [+ -90.0391,+ -69.0894+ ],+ [+ -81.9045,+ -81.9045+ ],+ [+ -69.0894,+ -90.0391+ ],+ [+ -57.9152,+ -100.3121+ ],+ [+ -43.4314,+ -104.8528+ ],+ [+ -29.9791,+ -111.8836+ ],+ [+ -14.8137,+ -112.5209+ ],+ [+ -0.0,+ -115.8304+ ],+ [+ 14.8137,+ -112.5209+ ],+ [+ 29.9791,+ -111.8836+ ],+ [+ 43.4314,+ -104.8528+ ],+ [+ 57.9152,+ -100.3121+ ],+ [+ 69.0894,+ -90.0391+ ],+ [+ 81.9045,+ -81.9045+ ],+ [+ 90.0391,+ -69.0894+ ],+ [+ 100.3121,+ -57.9152+ ],+ [+ 104.8528,+ -43.4314+ ],+ [+ 111.8836,+ -29.9791+ ],+ [+ 112.5209,+ -14.8137+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "89.3",+ "name": "ConeInHi"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 12.1544,+ 0.0+ ],+ [+ 11.7876,+ 1.5519+ ],+ [+ 11.7403,+ 3.1458+ ],+ [+ 10.9843,+ 4.5499+ ],+ [+ 10.5261,+ 6.0772+ ],+ [+ 9.4325,+ 7.2378+ ],+ [+ 8.5945,+ 8.5945+ ],+ [+ 7.2378,+ 9.4325+ ],+ [+ 6.0772,+ 10.5261+ ],+ [+ 4.5499,+ 10.9843+ ],+ [+ 3.1458,+ 11.7403+ ],+ [+ 1.5519,+ 11.7876+ ],+ [+ 0.0,+ 12.1544+ ],+ [+ -1.5519,+ 11.7876+ ],+ [+ -3.1458,+ 11.7403+ ],+ [+ -4.5499,+ 10.9843+ ],+ [+ -6.0772,+ 10.5261+ ],+ [+ -7.2378,+ 9.4325+ ],+ [+ -8.5945,+ 8.5945+ ],+ [+ -9.4325,+ 7.2378+ ],+ [+ -10.5261,+ 6.0772+ ],+ [+ -10.9843,+ 4.5499+ ],+ [+ -11.7403,+ 3.1458+ ],+ [+ -11.7876,+ 1.5519+ ],+ [+ -12.1544,+ 0.0+ ],+ [+ -11.7876,+ -1.5519+ ],+ [+ -11.7403,+ -3.1458+ ],+ [+ -10.9843,+ -4.5499+ ],+ [+ -10.5261,+ -6.0772+ ],+ [+ -9.4325,+ -7.2378+ ],+ [+ -8.5945,+ -8.5945+ ],+ [+ -7.2378,+ -9.4325+ ],+ [+ -6.0772,+ -10.5261+ ],+ [+ -4.5499,+ -10.9843+ ],+ [+ -3.1458,+ -11.7403+ ],+ [+ -1.5519,+ -11.7876+ ],+ [+ -0.0,+ -12.1544+ ],+ [+ 1.5519,+ -11.7876+ ],+ [+ 3.1458,+ -11.7403+ ],+ [+ 4.5499,+ -10.9843+ ],+ [+ 6.0772,+ -10.5261+ ],+ [+ 7.2378,+ -9.4325+ ],+ [+ 8.5945,+ -8.5945+ ],+ [+ 9.4325,+ -7.2378+ ],+ [+ 10.5261,+ -6.0772+ ],+ [+ 10.9843,+ -4.5499+ ],+ [+ 11.7403,+ -3.1458+ ],+ [+ 11.7876,+ -1.5519+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "ConeInLo"+ },+ {+ "sketch": "ConeInHi"+ }+ ],+ "operation": "new",+ "body_name": "ConeIn",+ "name": "ConeIn"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Cone",+ "tools": [+ "ConeIn"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "-1",+ "name": "LipLo"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 114.4444,+ 0.0+ ],+ [+ 111.196,+ 14.6392+ ],+ [+ 110.5448,+ 29.6204+ ],+ [+ 103.6182,+ 42.9201+ ],+ [+ 99.1118,+ 57.2222+ ],+ [+ 88.979,+ 68.276+ ],+ [+ 80.9244,+ 80.9244+ ],+ [+ 68.276,+ 88.979+ ],+ [+ 57.2222,+ 99.1118+ ],+ [+ 42.9201,+ 103.6182+ ],+ [+ 29.6204,+ 110.5448+ ],+ [+ 14.6392,+ 111.196+ ],+ [+ 0.0,+ 114.4444+ ],+ [+ -14.6392,+ 111.196+ ],+ [+ -29.6204,+ 110.5448+ ],+ [+ -42.9201,+ 103.6182+ ],+ [+ -57.2222,+ 99.1118+ ],+ [+ -68.276,+ 88.979+ ],+ [+ -80.9244,+ 80.9244+ ],+ [+ -88.979,+ 68.276+ ],+ [+ -99.1118,+ 57.2222+ ],+ [+ -103.6182,+ 42.9201+ ],+ [+ -110.5448,+ 29.6204+ ],+ [+ -111.196,+ 14.6392+ ],+ [+ -114.4444,+ 0.0+ ],+ [+ -111.196,+ -14.6392+ ],+ [+ -110.5448,+ -29.6204+ ],+ [+ -103.6182,+ -42.9201+ ],+ [+ -99.1118,+ -57.2222+ ],+ [+ -88.979,+ -68.276+ ],+ [+ -80.9244,+ -80.9244+ ],+ [+ -68.276,+ -88.979+ ],+ [+ -57.2222,+ -99.1118+ ],+ [+ -42.9201,+ -103.6182+ ],+ [+ -29.6204,+ -110.5448+ ],+ [+ -14.6392,+ -111.196+ ],+ [+ -0.0,+ -114.4444+ ],+ [+ 14.6392,+ -111.196+ ],+ [+ 29.6204,+ -110.5448+ ],+ [+ 42.9201,+ -103.6182+ ],+ [+ 57.2222,+ -99.1118+ ],+ [+ 68.276,+ -88.979+ ],+ [+ 80.9244,+ -80.9244+ ],+ [+ 88.979,+ -68.276+ ],+ [+ 99.1118,+ -57.2222+ ],+ [+ 103.6182,+ -42.9201+ ],+ [+ 110.5448,+ -29.6204+ ],+ [+ 111.196,+ -14.6392+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "6",+ "name": "LipHi"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 120.0,+ 0.0+ ],+ [+ 116.5939,+ 15.3499+ ],+ [+ 115.9111,+ 31.0583+ ],+ [+ 108.6482,+ 45.0036+ ],+ [+ 103.923,+ 60.0+ ],+ [+ 93.2984,+ 71.5903+ ],+ [+ 84.8528,+ 84.8528+ ],+ [+ 71.5903,+ 93.2984+ ],+ [+ 60.0,+ 103.923+ ],+ [+ 45.0036,+ 108.6482+ ],+ [+ 31.0583,+ 115.9111+ ],+ [+ 15.3499,+ 116.5939+ ],+ [+ 0.0,+ 120.0+ ],+ [+ -15.3499,+ 116.5939+ ],+ [+ -31.0583,+ 115.9111+ ],+ [+ -45.0036,+ 108.6482+ ],+ [+ -60.0,+ 103.923+ ],+ [+ -71.5903,+ 93.2984+ ],+ [+ -84.8528,+ 84.8528+ ],+ [+ -93.2984,+ 71.5903+ ],+ [+ -103.923,+ 60.0+ ],+ [+ -108.6482,+ 45.0036+ ],+ [+ -115.9111,+ 31.0583+ ],+ [+ -116.5939,+ 15.3499+ ],+ [+ -120.0,+ 0.0+ ],+ [+ -116.5939,+ -15.3499+ ],+ [+ -115.9111,+ -31.0583+ ],+ [+ -108.6482,+ -45.0036+ ],+ [+ -103.923,+ -60.0+ ],+ [+ -93.2984,+ -71.5903+ ],+ [+ -84.8528,+ -84.8528+ ],+ [+ -71.5903,+ -93.2984+ ],+ [+ -60.0,+ -103.923+ ],+ [+ -45.0036,+ -108.6482+ ],+ [+ -31.0583,+ -115.9111+ ],+ [+ -15.3499,+ -116.5939+ ],+ [+ -0.0,+ -120.0+ ],+ [+ 15.3499,+ -116.5939+ ],+ [+ 31.0583,+ -115.9111+ ],+ [+ 45.0036,+ -108.6482+ ],+ [+ 60.0,+ -103.923+ ],+ [+ 71.5903,+ -93.2984+ ],+ [+ 84.8528,+ -84.8528+ ],+ [+ 93.2984,+ -71.5903+ ],+ [+ 103.923,+ -60.0+ ],+ [+ 108.6482,+ -45.0036+ ],+ [+ 115.9111,+ -31.0583+ ],+ [+ 116.5939,+ -15.3499+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "LipLo"+ },+ {+ "sketch": "LipHi"+ }+ ],+ "operation": "new",+ "body_name": "Lip",+ "name": "Lip"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "-2",+ "name": "LipInLo"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 112.5508,+ 0.0+ ],+ [+ 109.3343,+ 14.3941+ ],+ [+ 108.7157,+ 29.1303+ ],+ [+ 101.8834,+ 42.2015+ ],+ [+ 97.4718,+ 56.2754+ ],+ [+ 87.4892,+ 67.1329+ ],+ [+ 79.5854,+ 79.5854+ ],+ [+ 67.1329,+ 87.4892+ ],+ [+ 56.2754,+ 97.4718+ ],+ [+ 42.2015,+ 101.8834+ ],+ [+ 29.1303,+ 108.7157+ ],+ [+ 14.3941,+ 109.3343+ ],+ [+ 0.0,+ 112.5508+ ],+ [+ -14.3941,+ 109.3343+ ],+ [+ -29.1303,+ 108.7157+ ],+ [+ -42.2015,+ 101.8834+ ],+ [+ -56.2754,+ 97.4718+ ],+ [+ -67.1329,+ 87.4892+ ],+ [+ -79.5854,+ 79.5854+ ],+ [+ -87.4892,+ 67.1329+ ],+ [+ -97.4718,+ 56.2754+ ],+ [+ -101.8834,+ 42.2015+ ],+ [+ -108.7157,+ 29.1303+ ],+ [+ -109.3343,+ 14.3941+ ],+ [+ -112.5508,+ 0.0+ ],+ [+ -109.3343,+ -14.3941+ ],+ [+ -108.7157,+ -29.1303+ ],+ [+ -101.8834,+ -42.2015+ ],+ [+ -97.4718,+ -56.2754+ ],+ [+ -87.4892,+ -67.1329+ ],+ [+ -79.5854,+ -79.5854+ ],+ [+ -67.1329,+ -87.4892+ ],+ [+ -56.2754,+ -97.4718+ ],+ [+ -42.2015,+ -101.8834+ ],+ [+ -29.1303,+ -108.7157+ ],+ [+ -14.3941,+ -109.3343+ ],+ [+ -0.0,+ -112.5508+ ],+ [+ 14.3941,+ -109.3343+ ],+ [+ 29.1303,+ -108.7157+ ],+ [+ 42.2015,+ -101.8834+ ],+ [+ 56.2754,+ -97.4718+ ],+ [+ 67.1329,+ -87.4892+ ],+ [+ 79.5854,+ -79.5854+ ],+ [+ 87.4892,+ -67.1329+ ],+ [+ 97.4718,+ -56.2754+ ],+ [+ 101.8834,+ -42.2015+ ],+ [+ 108.7157,+ -29.1303+ ],+ [+ 109.3343,+ -14.3941+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": "7",+ "name": "LipInHi"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 119.6937,+ 0.0+ ],+ [+ 116.2745,+ 15.3078+ ],+ [+ 115.6152,+ 30.979+ ],+ [+ 108.3505,+ 44.8803+ ],+ [+ 103.6577,+ 59.8468+ ],+ [+ 93.0427,+ 71.3942+ ],+ [+ 84.6362,+ 84.6362+ ],+ [+ 71.3942,+ 93.0427+ ],+ [+ 59.8468,+ 103.6577+ ],+ [+ 44.8803,+ 108.3505+ ],+ [+ 30.979,+ 115.6152+ ],+ [+ 15.3078,+ 116.2745+ ],+ [+ 0.0,+ 119.6937+ ],+ [+ -15.3078,+ 116.2745+ ],+ [+ -30.979,+ 115.6152+ ],+ [+ -44.8803,+ 108.3505+ ],+ [+ -59.8468,+ 103.6577+ ],+ [+ -71.3942,+ 93.0427+ ],+ [+ -84.6362,+ 84.6362+ ],+ [+ -93.0427,+ 71.3942+ ],+ [+ -103.6577,+ 59.8468+ ],+ [+ -108.3505,+ 44.8803+ ],+ [+ -115.6152,+ 30.979+ ],+ [+ -116.2745,+ 15.3078+ ],+ [+ -119.6937,+ 0.0+ ],+ [+ -116.2745,+ -15.3078+ ],+ [+ -115.6152,+ -30.979+ ],+ [+ -108.3505,+ -44.8803+ ],+ [+ -103.6577,+ -59.8468+ ],+ [+ -93.0427,+ -71.3942+ ],+ [+ -84.6362,+ -84.6362+ ],+ [+ -71.3942,+ -93.0427+ ],+ [+ -59.8468,+ -103.6577+ ],+ [+ -44.8803,+ -108.3505+ ],+ [+ -30.979,+ -115.6152+ ],+ [+ -15.3078,+ -116.2745+ ],+ [+ -0.0,+ -119.6937+ ],+ [+ 15.3078,+ -116.2745+ ],+ [+ 30.979,+ -115.6152+ ],+ [+ 44.8803,+ -108.3505+ ],+ [+ 59.8468,+ -103.6577+ ],+ [+ 71.3942,+ -93.0427+ ],+ [+ 84.6362,+ -84.6362+ ],+ [+ 93.0427,+ -71.3942+ ],+ [+ 103.6577,+ -59.8468+ ],+ [+ 108.3505,+ -44.8803+ ],+ [+ 115.6152,+ -30.979+ ],+ [+ 116.2745,+ -15.3078+ ]+ ],+ "closed": true,+ "infer": false+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "LipInLo"+ },+ {+ "sketch": "LipInHi"+ }+ ],+ "operation": "new",+ "body_name": "LipIn",+ "name": "LipIn"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Lip",+ "tools": [+ "LipIn"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Cone",+ "tools": [+ "Lip"+ ],+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.json b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.jsonnew file mode 100644index 0000000000..0d4fbde596--- /dev/null+++ b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/expected.json@@ -0,0 +1,9 @@+{+ "sources": [+ "tangency-labs/solidcraft#4092"+ ],+ "what": "the same without the top flange: the join fails with 'boolean Union: no result'",+ "source": "invariants",+ "method": "the pad (X -8..8, Y 18..25, Z 36..59) overlaps the body, ribs and ring, so the join is one connected solid; the join must succeed with one valid closed solid and no panic",+ "body_count": 1+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.json b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.jsonnew file mode 100644index 0000000000..d8152af37b--- /dev/null+++ b/tests/kernel-cases/ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad/recipe.json@@ -0,0 +1,508 @@+{+ "commands": [+ {+ "command": "file.new",+ "params": {+ "name": "Native_loft_pad_union_repro"+ }+ },+ {+ "command": "document.units",+ "params": {+ "units": "mm"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "diameter": "36 mm",+ "height": "21 mm",+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "new",+ "name": "01_Neck_outer_D36_H21",+ "body_name": "NATIVE_CAP_BODY"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "02_Outer_transition_round",+ "plane": "XY",+ "offset": "21 mm"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "diameter": 36+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "03_Outer_transition_ellipse",+ "plane": "XY",+ "offset": "38 mm"+ }+ },+ {+ "command": "sketch.ellipse",+ "params": {+ "center": [+ 0,+ 0+ ],+ "major": [+ 30.0,+ 0+ ],+ "minor_radius": 20.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "02_Outer_transition_round"+ },+ {+ "sketch": "03_Outer_transition_ellipse"+ }+ ],+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "04_Outer_round_to_oval_transition"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "05_Upper_chamber_60x40",+ "plane": "XY",+ "offset": "38 mm"+ }+ },+ {+ "command": "sketch.ellipse",+ "params": {+ "center": [+ 0,+ 0+ ],+ "major": [+ 30.0,+ 0+ ],+ "minor_radius": 20.0+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "05_Upper_chamber_60x40",+ "distance": 26,+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "06_Upper_chamber_blank"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "Handle_outer_D24",+ "plane": {+ "origin": [+ -5,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 30,+ 47+ ],+ "diameter": 24+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Handle_outer_D24",+ "distance": 10,+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "Handle_outer_D24_thickness10"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "Handle_lower_rib_X-8",+ "plane": {+ "origin": [+ -8,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 18.0,+ 37.5+ ],+ "end": [+ 19.5,+ 36.0+ ],+ "through": [+ 18.439339828220177,+ 36.43933982822018+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 19.5,+ 36.0+ ],+ [+ 24.4516191451179,+ 36.0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 24.4516191451179,+ 36.0+ ],+ "end": [+ 25.20742568340403,+ 38.79566835134765+ ],+ "through": [+ 25.89963546529897,+ 37.10853003117829+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 25.20742568340403,+ 38.79566835134765+ ],+ [+ 20.25580653828613,+ 41.68411285266642+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 20.25580653828613,+ 41.68411285266642+ ],+ "end": [+ 18.0,+ 40.38844450131877+ ],+ "through": [+ 18.75290891031588,+ 41.68915773017231+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 18.0,+ 40.38844450131877+ ],+ [+ 18.0,+ 37.5+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Handle_lower_rib_X-8",+ "distance": 4,+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "Handle_lower_rib_X-8_R1p5_thickness4"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "Handle_lower_rib_X4",+ "plane": {+ "origin": [+ 4,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 18.0,+ 37.5+ ],+ "end": [+ 19.5,+ 36.0+ ],+ "through": [+ 18.439339828220177,+ 36.43933982822018+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 19.5,+ 36.0+ ],+ [+ 24.4516191451179,+ 36.0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 24.4516191451179,+ 36.0+ ],+ "end": [+ 25.20742568340403,+ 38.79566835134765+ ],+ "through": [+ 25.89963546529897,+ 37.10853003117829+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 25.20742568340403,+ 38.79566835134765+ ],+ [+ 20.25580653828613,+ 41.68411285266642+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 20.25580653828613,+ 41.68411285266642+ ],+ "end": [+ 18.0,+ 40.38844450131877+ ],+ "through": [+ 18.75290891031588,+ 41.68915773017231+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 18.0,+ 40.38844450131877+ ],+ [+ 18.0,+ 37.5+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Handle_lower_rib_X4",+ "distance": 4,+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "Handle_lower_rib_X4_R1p5_thickness4"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "name": "Handle_root_pad_R3",+ "plane": {+ "origin": [+ 0,+ 18,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ -8,+ 36+ ],+ "p1": [+ 8,+ 59+ ],+ "radius": 3+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Handle_root_pad_R3",+ "distance": 7,+ "direction": "negative",+ "operation": "join",+ "targets": [+ "NATIVE_CAP_BODY"+ ],+ "name": "Native_root_pad_R3"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.jsonnew file mode 100644index 0000000000..6a6995d375--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/expected.json@@ -0,0 +1,10 @@+{+ "sources": [],+ "what": "the stock shelled 2 mm with no face open: a closed body with a sealed void",+ "source": "analytic",+ "method": "void 56x36x16: V = 48000 - 32256; faces 6 outer + 6 inner; one body, an outer and an inner shell",+ "body_count": 1,+ "shells": 2,+ "volume_mm3": 15744,+ "faces": 12+}diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.jsonnew file mode 100644index 0000000000..77c323e4a4--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/012-closed-shell-sealed-void/recipe.json@@ -0,0 +1,12 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.shell",+ "params": {+ "faces": [],+ "thickness": 2+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.jsonnew file mode 100644index 0000000000..bb9fc7609a--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "a dome r20 shelled 2 mm, open at its flat base: the rim is the circle r18 where the inner sphere meets the base plane",+ "source": "analytic",+ "method": "V = (2/3) pi (20^3 - 18^3); faces: outer sphere, inner sphere, base ring",+ "body_count": 1,+ "volume_mm3": 4540.648581988447,+ "faces": 3+}diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.jsonnew file mode 100644index 0000000000..aa3c517f04--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/013-dome-shelled-from-base/recipe.json@@ -0,0 +1,98 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ }+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 20,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ 0+ ],+ "start": [+ 20,+ 0+ ],+ "end": [+ 0,+ 20+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 20+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": "Z",+ "angle": "360 deg",+ "operation": "new"+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ 10,+ 0,+ 0+ ]+ ],+ "thickness": 2+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.jsonnew file mode 100644index 0000000000..0fa7a1053c--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3576",+ "tangency-labs/solidcraft#3573"+ ],+ "what": "a 120x80x40 box drafted 5 degrees with 4 mm rounds on the sloping corners, shelled 2 mm open at the top: the inner rounds' edges must lie on their faces (#3573 reports the same design)",+ "source": "invariants",+ "method": "no closed-form volume (tilted rounds). Invariants: the shell succeeds, one closed body, and the record's geometry check holds (every edge of the four inner rounds lies on its faces; the old offset left them up to 0.02 mm off, which other STEP readers reject)",+ "body_count": 1+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.jsonnew file mode 100644index 0000000000..e6ad11c235--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled/recipe.json@@ -0,0 +1,76 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY"+ }+ },+ {+ "command": "sketch.rectangle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "corner": [+ 60,+ 40+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 40,+ "taper": "-5 deg",+ "operation": "new"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 58.25022672948152,+ 38.25022672948152,+ 20+ ],+ [+ 58.25022672948152,+ -38.25022672948152,+ 20+ ],+ [+ -58.25022672948152,+ 38.25022672948152,+ 20+ ],+ [+ -58.25022672948152,+ -38.25022672948152,+ 20+ ]+ ],+ "radius": 4+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ 0,+ 0,+ 40+ ]+ ],+ "thickness": 2+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.json b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.jsonnew file mode 100644index 0000000000..aa0957cafc--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4847"+ ],+ "what": "a dome (a quarter disc r20 revolved) shelled 2 mm from its flat base, then the base ring (r 18..20) face-extruded 10 mm back into the dome as a join: ~120 s, then 'boolean Union: no result'",+ "source": "analytic",+ "method": "shell: (2/3) pi (20^3 - 18^3). The ring's prism r 18..20, z 0..10 lies inside the dome's wall where r^2 + z^2 <= 20^2 (r >= 18 keeps it outside the cavity) and pokes out elsewhere: it adds 760 pi - Int_18^20 2 pi r sqrt(400 - r^2) dr = 760 pi - (2 pi/3) 76^1.5",+ "body_count": 1,+ "volume_mm3": 5540.612+}diff --git a/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.json b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.jsonnew file mode 100644index 0000000000..7c7c430cc9--- /dev/null+++ b/tests/kernel-cases/ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back/recipe.json@@ -0,0 +1,113 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Quarter"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 20,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.arc.three_point",+ "params": {+ "start": [+ 20,+ 0+ ],+ "through": [+ 14.142136,+ 14.142136+ ],+ "end": [+ 0,+ 20+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 20+ ],+ [+ 0,+ 0+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "sketch": "Quarter",+ "axis": "y",+ "body_name": "Dome"+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ 0,+ 0,+ 0+ ]+ ],+ "thickness": 2+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 19,+ 0,+ 0+ ],+ "face_body": "Dome",+ "distance": 10,+ "direction": "negative",+ "operation": "join"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/golden.json b/tests/kernel-cases/ladder/golden.jsonindex f05d052263..a1e17675d8 100644--- a/tests/kernel-cases/ladder/golden.json+++ b/tests/kernel-cases/ladder/golden.json@@ -1,265 +1,880 @@{- "reason": "SMLib only (truck removed): each case's smlib entry from the last recording, which predates SMLib running every case; record again after the first SMLib-only run","cases": {"ladder/01-primitives/001-box": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.002421083,+ "status": "pass"},"ladder/01-primitives/002-cylinder": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2513.27408091628,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 9424.777353639352+ },+ "seconds": 0.028312155,+ "status": "pass"},"ladder/01-primitives/003-cone": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1307.6181023117074,+ "body_count": 1,+ "edges": 3,+ "faces": 2,+ "vertices": 3,+ "volume_mm3": 3141.59242697122+ },+ "seconds": 0.013765259,+ "status": "pass"},"ladder/01-primitives/004-frustum": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1364.1829847648855,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 3665.191341582638+ },+ "seconds": 0.016146822,+ "status": "pass"},"ladder/01-primitives/005-sphere": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1256.6371531595494,+ "body_count": 1,+ "edges": 1,+ "faces": 1,+ "vertices": 2,+ "volume_mm3": 4188.791896913583+ },+ "seconds": 0.004701028,+ "status": "pass"},"ladder/01-primitives/006-torus": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 3947.8419806693646,+ "body_count": 1,+ "edges": 1,+ "faces": 1,+ "vertices": 1,+ "volume_mm3": 9869.61010099745+ },+ "seconds": 0.46266828,+ "status": "pass"},"ladder/02-booleans/001-coincident-face-join": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 10800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 72000.0+ },+ "seconds": 0.011548066,+ "status": "pass"},"ladder/02-booleans/002-coplanar-overlap-join": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 14400.0,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 84000.0+ },+ "seconds": 0.013128601,+ "status": "pass"},"ladder/02-booleans/003-pocket-flush-with-top": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9600.000000000002,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 44000.0+ },+ "seconds": 0.012931752,+ "status": "pass"},"ladder/02-booleans/004-edge-on-edge-no-overlap": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.00644086,+ "status": "pass"},"ladder/02-booleans/005-vertex-on-face-no-overlap": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.034711702,+ "status": "pass"},"ladder/02-booleans/006-tangent-along-line-no-overlap": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.026354658,+ "status": "pass"},"ladder/02-booleans/007-near-tangent-gap-1e-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.018841682,+ "status": "pass"},"ladder/02-booleans/008-near-tangent-gap-1e-6": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.015557891,+ "status": "pass"},"ladder/02-booleans/009-near-tangent-overlap-1e-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.00018857595,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 47999.9886864612+ },+ "seconds": 0.029918273,+ "status": "pass"},"ladder/02-booleans/010-near-tangent-overlap-1e-6": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.0,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 48000.0+ },+ "seconds": 0.016262407,+ "status": "pass"},"ladder/02-booleans/011-tangent-along-circle-through-hole": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9428.318515408751,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 41716.81450698026+ },+ "seconds": 0.034853735,+ "status": "pass"},"ladder/02-booleans/012-tangent-along-circle-bowl": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9742.477897359224,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 42764.01195654861+ },+ "seconds": 0.043282076,+ "status": "pass"},"ladder/02-booleans/013-cut-across-cylinder-seam": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2036.8673139138011,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 5888.550569284607+ },+ "seconds": 0.038788456,+ "status": "pass"},"ladder/02-booleans/014-cut-through-sphere-pole": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1332.0893143869712,+ "body_count": 1,+ "edges": 14,+ "faces": 6,+ "vertices": 10,+ "volume_mm3": 4110.944533826848+ },+ "seconds": 0.011872004,+ "status": "pass"},"ladder/02-booleans/015-knife-edge-wedge-cut": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 6929.822128134708,+ "body_count": 1,+ "edges": 9,+ "faces": 5,+ "vertices": 6,+ "volume_mm3": 24000.000000000007+ },+ "seconds": 0.011355745,+ "status": "pass"},"ladder/02-booleans/016-v-groove-pinches-bottom-to-line": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9225.904606350497,+ "body_count": 2,+ "edges": 24,+ "faces": 12,+ "vertices": 16,+ "volume_mm3": 38400.000000000015+ },+ "seconds": 0.007019822,+ "status": "pass"},"ladder/02-booleans/017-cylinder-tangent-top-and-bottom": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 11941.592611921053,+ "body_count": 2,+ "edges": 24,+ "faces": 12,+ "vertices": 16,+ "volume_mm3": 29150.438046445848+ },+ "seconds": 0.023206421,+ "status": "pass"},"ladder/02-booleans/018-hole-tangent-to-side-face": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9428.31829497222,+ "body_count": 1,+ "edges": 17,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 41716.81209239218+ },+ "seconds": 0.026489907,+ "status": "pass"},"ladder/02-booleans/019-notch-flush-with-end-face": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8800.000000000002,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 32000.000000000015+ },+ "seconds": 0.012994217,+ "status": "pass"},"ladder/02-booleans/020-part-back-wall": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 10900.0,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 57000.0+ },+ "seconds": 0.012916937,+ "status": "pass"+ },+ "ladder/02-booleans/021-holes-touching-at-a-point": {+ "measured": {+ "area_mm2": 9742.477564676688,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 10,+ "volume_mm3": 44858.40494270982+ },+ "seconds": 0.066898018,+ "status": "pass"+ },+ "ladder/02-booleans/022-cylinder-grazing-a-hole-edge": {+ "measured": {+ "area_mm2": 576.0597799448259,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 700.1694600993085+ },+ "seconds": 0.059928004,+ "status": "pass"+ },+ "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined": {+ "measured": {+ "area_mm2": 1610.939957683726,+ "body_count": 1,+ "edges": 54,+ "faces": 22,+ "vertices": 34,+ "volume_mm3": 769.4693261952389+ },+ "seconds": 0.107631267,+ "status": "pass"+ },+ "ladder/02-booleans/024-wall-halves-merged-into-a-flange": {+ "measured": {+ "area_mm2": 9676.104640800102,+ "body_count": 1,+ "edges": 9,+ "faces": 6,+ "vertices": 6,+ "volume_mm3": 37875.03682260403+ },+ "seconds": 0.175934284,+ "status": "pass"+ },+ "ladder/02-booleans/025-flush-chord-layers-joined": {+ "measured": {+ "area_mm2": 19848.963867303115,+ "body_count": 1,+ "edges": 86,+ "faces": 30,+ "vertices": 52,+ "volume_mm3": 24340.93465191528+ },+ "seconds": 1.036233441,+ "status": "pass"},"ladder/03-analytic-profiles/001-extrude-rect-with-arc-end": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 10513.274682103463,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 60566.37574264513+ },+ "seconds": 0.013805836,+ "status": "pass"},"ladder/03-analytic-profiles/002-extrude-annulus": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 4712.3888135105635,+ "body_count": 1,+ "edges": 6,+ "faces": 4,+ "vertices": 4,+ "volume_mm3": 14137.165496409769+ },+ "seconds": 0.032683758,+ "status": "pass"},"ladder/03-analytic-profiles/003-extrude-tapered-circle": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1679.0714571133199,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 5247.894417424099+ },+ "seconds": 0.039307211,+ "status": "pass"},"ladder/03-analytic-profiles/004-revolve-full-off-axis": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 7539.82227780291,+ "body_count": 1,+ "edges": 6,+ "faces": 4,+ "vertices": 4,+ "volume_mm3": 28274.33099281954+ },+ "seconds": 0.034131125,+ "status": "pass"},"ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 3769.911189319725,+ "body_count": 1,+ "edges": 2,+ "faces": 2,+ "vertices": 2,+ "volume_mm3": 16755.16137194915+ },+ "seconds": 0.072184153,+ "status": "pass"},"ladder/03-analytic-profiles/006-revolve-partial-90": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1142.4774823972846,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 2356.1929112075295+ },+ "seconds": 0.008946295,+ "status": "pass"},"ladder/03-analytic-profiles/007-revolve-180-touching-axis": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2249.3361006094165,+ "body_count": 1,+ "edges": 6,+ "faces": 4,+ "vertices": 4,+ "volume_mm3": 7068.582941859537+ },+ "seconds": 0.015959589,+ "status": "pass"},"ladder/03-analytic-profiles/008-extrude-slot": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 3656.63741233849,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 11141.594404248584+ },+ "seconds": 0.011646259,+ "status": "pass"},"ladder/03-analytic-profiles/009-part-boss-and-slot": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12164.778448487314,+ "body_count": 1,+ "edges": 33,+ "faces": 14,+ "vertices": 22,+ "volume_mm3": 55605.309277598055+ },+ "seconds": 0.065359132,+ "status": "pass"+ },+ "ladder/03-analytic-profiles/010-revolve-horn-torus-270": {+ "measured": {+ "area_mm2": 7211.92921002673,+ "body_count": 1,+ "edges": 6,+ "faces": 4,+ "vertices": 4,+ "volume_mm3": 28932.185072957283+ },+ "seconds": 0.07428757,+ "status": "pass"},"ladder/04-spline-profiles/001-extrude-bezier-arch": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2766.836543476887,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 8200.0+ },+ "seconds": 0.008144467,+ "status": "pass"},"ladder/04-spline-profiles/002-revolve-bezier-profile": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 5856.9826422553115,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 34131.153548347604+ },+ "seconds": 0.080633805,+ "status": "pass"},"ladder/04-spline-profiles/003-pipe-along-bezier": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 605.9576565517693,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 580.8255293341258+ },+ "seconds": 0.079442777,+ "status": "pass"},"ladder/04-spline-profiles/004-sweep-square-along-bezier": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 771.5291970478809,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 739.5292097504819+ },+ "seconds": 0.037046017,+ "status": "pass"},"ladder/04-spline-profiles/005-loft-square-frustum": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 5794.733192202055,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 28000.000000000007+ },+ "seconds": 0.009299752,+ "status": "pass"},"ladder/04-spline-profiles/006-loft-circle-frustum": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 4551.172885600089,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 21991.14802951055+ },+ "seconds": 0.031463497,+ "status": "pass"},"ladder/04-spline-profiles/007-loft-three-circles": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 6453.967221806411,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 23457.221256199402+ },+ "seconds": 0.038500679,+ "status": "pass"},"ladder/04-spline-profiles/008-loft-square-to-circle": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 5454.34068438542,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 26310.54362092466+ },+ "seconds": 0.013877676,+ "status": "pass"},"ladder/04-spline-profiles/009-extrude-periodic-fit-spline": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 3698.6023993383496,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 12281.011858436344+ },+ "seconds": 0.028766989,+ "status": "pass"},"ladder/04-spline-profiles/010-part-bezier-window": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12389.018284526814,+ "body_count": 1,+ "edges": 39,+ "faces": 16,+ "vertices": 26,+ "volume_mm3": 54273.309277598055+ },+ "seconds": 0.095040941,+ "status": "pass"+ },+ "ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined": {+ "measured": {+ "area_mm2": 121420.35300591686,+ "body_count": 1,+ "edges": 1096,+ "faces": 388,+ "vertices": 584,+ "volume_mm3": 44443.494125231206+ },+ "seconds": 1.129550392,+ "status": "pass"+ },+ "ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad": {+ "measured": {+ "area_mm2": 13275.843011957519,+ "body_count": 1,+ "edges": 86,+ "faces": 31,+ "vertices": 57,+ "volume_mm3": 100193.008857701+ },+ "seconds": 0.499138439,+ "status": "pass"},"ladder/05-holes-and-taps/001-simple-through": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9271.23888918968,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 46429.20345247036+ },+ "seconds": 0.030064675,+ "status": "pass"},"ladder/05-holes-and-taps/002-simple-blind-flat": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9114.159273842968,+ "body_count": 1,+ "edges": 15,+ "faces": 8,+ "vertices": 10,+ "volume_mm3": 47214.60167821204+ },+ "seconds": 0.024571035,+ "status": "pass"},"ladder/05-holes-and-taps/003-drilled-blind-118": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9127.246594228827,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 47135.94953558977+ },+ "seconds": 0.022535569,+ "status": "pass"},"ladder/05-holes-and-taps/004-counterbore": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9234.733473850809,+ "body_count": 1,+ "edges": 18,+ "faces": 9,+ "vertices": 12,+ "volume_mm3": 46926.50439234107+ },+ "seconds": 0.048801764,+ "status": "pass"},"ladder/05-holes-and-taps/005-countersink": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9122.958530910642,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 47219.57154291447+ },+ "seconds": 0.060514999,+ "status": "pass"},"ladder/05-holes-and-taps/006-tapped-m6-through": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9074.889289958897,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47607.30072936878+ },+ "seconds": 0.017080042,+ "status": "pass"},"ladder/05-holes-and-taps/007-tapped-m8-blind": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9060.431918590197,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 47546.393985981646+ },+ "seconds": 0.023700407,+ "status": "pass"},"ladder/05-holes-and-taps/008-tapped-m5-into-curved-face": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 10551.678983923912,+ "body_count": 1,+ "edges": 6,+ "faces": 4,+ "vertices": 4,+ "volume_mm3": 74844.80869901458+ },+ "seconds": 0.068223193,+ "status": "pass"},"ladder/05-holes-and-taps/009-hole-0.5-from-edge": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9271.238661980013,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 46429.20147858148+ },+ "seconds": 0.017685341,+ "status": "pass"},"ladder/05-holes-and-taps/010-hole-tangent-to-end-face": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9271.238824131646,+ "body_count": 1,+ "edges": 17,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 46429.202650315056+ },+ "seconds": 0.019412548,+ "status": "pass"},"ladder/05-holes-and-taps/011-crossing-holes-steinmetz": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9970.796002655847,+ "body_count": 1,+ "edges": 27,+ "faces": 10,+ "vertices": 17,+ "volume_mm3": 43954.275881084504+ },+ "seconds": 0.063841221,+ "status": "pass"},"ladder/05-holes-and-taps/012-crossing-tapped-holes-offset": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9586.62063280522,+ "body_count": 1,+ "edges": 21,+ "faces": 8,+ "vertices": 14,+ "volume_mm3": 46870.21851307568+ },+ "seconds": 0.071817865,+ "status": "pass"},"ladder/05-holes-and-taps/013-part-holes": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 13115.21289450834,+ "body_count": 1,+ "edges": 48,+ "faces": 20,+ "vertices": 32,+ "volume_mm3": 53470.419311175334+ },+ "seconds": 0.234927852,+ "status": "pass"},"ladder/06-threads/001-external-m10-full": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1529.0164922938948,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 1954.199115350778+ },+ "seconds": 1.3368298730000001,+ "status": "pass"},"ladder/06-threads/002-external-m10x1-fine": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1581.5491374615535,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 2081.8666358146415+ },+ "seconds": 2.362301245,+ "status": "pass"},"ladder/06-threads/003-external-m10-partial-length": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1314.9714556944045,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 2155.198115106591+ },+ "seconds": 0.622200415,+ "status": "pass"},"ladder/06-threads/004-external-m10-to-shoulder": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2169.7800481918475,+ "body_count": 1,+ "edges": 21,+ "faces": 10,+ "vertices": 14,+ "volume_mm3": 3615.802302421407+ },+ "seconds": 1.218730446,+ "status": "pass"},"ladder/06-threads/005-internal-m10-through": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 4978.062684127769,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 16688.208561903153+ },+ "seconds": 0.726237522,+ "status": "pass"},"ladder/06-threads/006-external-m10-into-chamfer": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1508.1279652569233,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 1948.6477627849551+ },+ "seconds": 1.3903218339999999,+ "status": "pass"},"ladder/06-threads/007-external-m10-at-filleted-shoulder": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2120.444130537007,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 3636.797350214795+ },+ "seconds": 1.231074762,+ "status": "pass"},"ladder/06-threads/008-multi-start-thread": {"seconds": null,@@ -270,200 +885,617 @@"status": "unsupported"},"ladder/06-threads/010-part-threaded-boss": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 13583.777771562018,+ "body_count": 1,+ "edges": 63,+ "faces": 25,+ "vertices": 42,+ "volume_mm3": 53114.19660782891+ },+ "seconds": 0.659778997,+ "status": "pass"},"ladder/07-fillets/001-single-edge-r5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8660.508890351646,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47678.09530101598+ },+ "seconds": 0.007045327,+ "status": "pass"},"ladder/07-fillets/002-four-vertical-edges-r5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8585.398552475748,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 47570.79943563683+ },+ "seconds": 0.014052829,+ "status": "pass"},"ladder/07-fillets/003-tangent-chain-r3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8334.925890321756,+ "body_count": 1,+ "edges": 40,+ "faces": 18,+ "vertices": 24,+ "volume_mm3": 47209.22370148293+ },+ "seconds": 0.043514557,+ "status": "pass"},"ladder/07-fillets/004-convex-and-concave-r5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 4514.159503196192,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 14000.002049410516+ },+ "seconds": 0.020404232,+ "status": "pass"},"ladder/07-fillets/005-variable-r5-to-r1": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8717.217924043853,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47866.93985730924+ },+ "seconds": 0.010664095,+ "status": "pass"},"ladder/07-fillets/006-variable-r5-to-zero": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8730.326099374339,+ "body_count": 1,+ "edges": 14,+ "faces": 7,+ "vertices": 9,+ "volume_mm3": 47892.693434961286+ },+ "seconds": 0.009475033,+ "status": "pass"},"ladder/07-fillets/007-variable-r5-to-1e-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8730.313207916415,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47892.67196922709+ },+ "seconds": 0.018208591,+ "status": "pass"},"ladder/07-fillets/008-constant-r1e-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8799.9742473454,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47999.99997963964+ },+ "seconds": 0.012294053,+ "status": "pass"},"ladder/07-fillets/009-corner-three-equal-r5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8522.843213284448,+ "body_count": 1,+ "edges": 21,+ "faces": 10,+ "vertices": 13,+ "volume_mm3": 47377.122731304844+ },+ "seconds": 0.01157685,+ "status": "pass"},"ladder/07-fillets/010-corner-unequal-r7-r3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8589.124659133073,+ "body_count": 1,+ "edges": 22,+ "faces": 10,+ "vertices": 14,+ "volume_mm3": 47604.38618238413+ },+ "seconds": 0.018646689,+ "status": "pass"},"ladder/07-fillets/011-chain-ending-at-corner": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8571.128308024523,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 11,+ "volume_mm3": 47475.477375283306+ },+ "seconds": 0.009817834,+ "status": "pass"},"ladder/07-fillets/012-variable-into-rounded-corner": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8665.870632567001,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 47754.87775109653+ },+ "seconds": 0.0295324,+ "status": "pass"},"ladder/07-fillets/013-corner-setback": {"seconds": null,"status": "unsupported"},"ladder/07-fillets/014-curved-edge-r2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1829.240960227803,+ "body_count": 1,+ "edges": 5,+ "faces": 4,+ "vertices": 3,+ "volume_mm3": 6231.659066701741+ },+ "seconds": 0.040479616,+ "status": "pass"},"ladder/07-fillets/015-corner-g2-patch": {- "seconds": null,+ "seconds": 0.002871708,"status": "unsupported"},"ladder/07-fillets/016-corner-three-sequential-r5-r3-r7": {- "seconds": null,- "status": "unsupported"+ "seconds": 0.026357347,+ "status": "fail"},"ladder/07-fillets/017-part-rounds": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12905.663516135399,+ "body_count": 1,+ "edges": 59,+ "faces": 24,+ "vertices": 39,+ "volume_mm3": 53151.0192291965+ },+ "seconds": 0.388790715,+ "status": "pass"},"ladder/08-chamfers/001-equal-5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8599.264068703942,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47250.000000000015+ },+ "seconds": 0.01154789,+ "status": "pass"},"ladder/08-chamfers/002-two-distances-5-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8654.857113680613,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47550.00000001157+ },+ "seconds": 0.006581516,+ "status": "pass"},"ladder/08-chamfers/003-distance-angle-5-30": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8658.771324025132,+ "body_count": 1,+ "edges": 15,+ "faces": 7,+ "vertices": 10,+ "volume_mm3": 47566.987298072774+ },+ "seconds": 0.00646942,+ "status": "pass"},"ladder/08-chamfers/004-corner-three-equal-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8573.97905781626,+ "body_count": 1,+ "edges": 21,+ "faces": 9,+ "vertices": 14,+ "volume_mm3": 47480.25+ },+ "seconds": 0.009521322,+ "status": "pass"},"ladder/08-chamfers/005-corner-two-mitred-3": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8611.536146650571,+ "body_count": 1,+ "edges": 17,+ "faces": 8,+ "vertices": 11,+ "volume_mm3": 47559.0+ },+ "seconds": 0.008023283,+ "status": "pass"},"ladder/08-chamfers/006-curved-edge-2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 1806.138314620597,+ "body_count": 1,+ "edges": 5,+ "faces": 4,+ "vertices": 3,+ "volume_mm3": 6165.898978570243+ },+ "seconds": 0.040025774,+ "status": "pass"},"ladder/08-chamfers/007-chamfer-then-fillets": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8652.794170649633,+ "body_count": 1,+ "edges": 21,+ "faces": 9,+ "vertices": 14,+ "volume_mm3": 47700.04681392183+ },+ "seconds": 0.027111446,+ "status": "pass"},"ladder/08-chamfers/008-part-chamfers": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12800.622976693989,+ "body_count": 1,+ "edges": 64,+ "faces": 26,+ "vertices": 42,+ "volume_mm3": 53006.93294467868+ },+ "seconds": 0.519171731,+ "status": "pass"},"ladder/09-shells-and-offsets/001-box-open-top-t2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12112.000000000002,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 11712.00000000001+ },+ "seconds": 0.009184408,+ "status": "pass"},"ladder/09-shells-and-offsets/002-cylinder-open-top-t1": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 4153.185490793196,+ "body_count": 1,+ "edges": 6,+ "faces": 5,+ "vertices": 4,+ "volume_mm3": 2045.1781194378996+ },+ "seconds": 0.054106411,+ "status": "pass"},"ladder/09-shells-and-offsets/003-tube-two-open-faces": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8448.0,+ "body_count": 1,+ "edges": 24,+ "faces": 10,+ "vertices": 16,+ "volume_mm3": 7680.000000000007+ },+ "seconds": 0.009418953,+ "status": "pass"},"ladder/09-shells-and-offsets/004-thin-wall-0.2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12728.320000000002,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 1268.8319999999949+ },+ "seconds": 0.016972329,+ "status": "pass"},"ladder/09-shells-and-offsets/005-shell-rounds-r5-t2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 11804.69049328623,+ "body_count": 1,+ "edges": 48,+ "faces": 19,+ "vertices": 32,+ "volume_mm3": 11421.860960200946+ },+ "seconds": 0.098389195,+ "status": "pass"},"ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 12075.946992402418,+ "body_count": 1,+ "edges": 36,+ "faces": 15,+ "vertices": 24,+ "volume_mm3": 11694.832919801527+ },+ "seconds": 0.041722741,+ "status": "pass"},"ladder/09-shells-and-offsets/007-offset-top-face-5": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9800.000000000004,+ "body_count": 1,+ "edges": 12,+ "faces": 6,+ "vertices": 8,+ "volume_mm3": 60000.00000000002+ },+ "seconds": 0.017068202,+ "status": "pass"},"ladder/09-shells-and-offsets/008-offset-cylinder-wall-2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 2412.743113705001,+ "body_count": 1,+ "edges": 3,+ "faces": 3,+ "vertices": 2,+ "volume_mm3": 9047.786411660763+ },+ "seconds": 0.040247807,+ "status": "pass"},"ladder/09-shells-and-offsets/009-shell-outside-t2": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 14384.000000000005,+ "body_count": 1,+ "edges": 24,+ "faces": 11,+ "vertices": 16,+ "volume_mm3": 13952.000000000015+ },+ "seconds": 0.031217512,+ "status": "pass"},"ladder/09-shells-and-offsets/010-shell-under-rounded-top": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 11769.84062599412,+ "body_count": 1,+ "edges": 40,+ "faces": 19,+ "vertices": 24,+ "volume_mm3": 11375.174354868088+ },+ "seconds": 0.090267208,+ "status": "pass"},"ladder/09-shells-and-offsets/011-part-shell": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 20922.653935613285,+ "body_count": 1,+ "edges": 140,+ "faces": 55,+ "vertices": 92,+ "volume_mm3": 15397.69748736967+ },+ "seconds": 0.867852336,+ "status": "pass"+ },+ "ladder/09-shells-and-offsets/012-closed-shell-sealed-void": {+ "measured": {+ "area_mm2": 15776.0,+ "body_count": 1,+ "edges": 24,+ "faces": 12,+ "vertices": 16,+ "volume_mm3": 15743.999999999998+ },+ "seconds": 0.008990887,+ "status": "pass"+ },+ "ladder/09-shells-and-offsets/013-dome-shelled-from-base": {+ "measured": {+ "area_mm2": 4787.787342099054,+ "body_count": 1,+ "edges": 4,+ "faces": 3,+ "vertices": 4,+ "volume_mm3": 4540.648982326449+ },+ "seconds": 0.123468649,+ "status": "pass"+ },+ "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled": {+ "measured": {+ "area_mm2": 48232.25453283639,+ "body_count": 1,+ "edges": 48,+ "faces": 19,+ "vertices": 32,+ "volume_mm3": 47497.57000224123+ },+ "seconds": 0.089872966,+ "status": "pass"+ },+ "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back": {+ "measured": {+ "area_mm2": 5332.688306886705,+ "body_count": 1,+ "edges": 7,+ "faces": 6,+ "vertices": 7,+ "volume_mm3": 5540.613076260847+ },+ "seconds": 0.691698914,+ "status": "pass"},"ladder/10-patterns-and-mirrors/001-rect-pattern-holes": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 7506.857613724541,+ "body_count": 1,+ "edges": 30,+ "faces": 12,+ "vertices": 20,+ "volume_mm3": 22821.901949174513+ },+ "seconds": 0.155016195,+ "status": "pass"},"ladder/10-patterns-and-mirrors/002-circular-pattern-holes": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8595.396203488179,+ "body_count": 1,+ "edges": 27,+ "faces": 11,+ "vertices": 18,+ "volume_mm3": 26012.383532001513+ },+ "seconds": 0.352542366,+ "status": "pass"},"ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 3868.0116581684933,+ "body_count": 2,+ "edges": 39,+ "faces": 17,+ "vertices": 26,+ "volume_mm3": 9195.866260243196+ },+ "seconds": 0.243903077,+ "status": "pass"},"ladder/10-patterns-and-mirrors/004-mirror-body-joined": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9742.47737488009,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 44858.40293082078+ },+ "seconds": 0.036172974,+ "status": "pass"},"ladder/10-patterns-and-mirrors/005-mirror-feature": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 9742.477396690481,+ "body_count": 1,+ "edges": 18,+ "faces": 8,+ "vertices": 12,+ "volume_mm3": 44858.4039421837+ },+ "seconds": 0.038690761,+ "status": "pass"},"ladder/10-patterns-and-mirrors/006-circular-pattern-counterbores": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 8472.87515433848,+ "body_count": 1,+ "edges": 39,+ "faces": 21,+ "vertices": 26,+ "volume_mm3": 26304.552440002004+ },+ "seconds": 0.670372726,+ "status": "pass"},"ladder/10-patterns-and-mirrors/007-pattern-bodies": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 980.1768925219793,+ "body_count": 4,+ "edges": 12,+ "faces": 12,+ "vertices": 8,+ "volume_mm3": 1130.973281262568+ },+ "seconds": 0.017452188,+ "status": "pass"},"ladder/10-patterns-and-mirrors/008-part-vents": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 20922.653960454496,+ "body_count": 1,+ "edges": 152,+ "faces": 59,+ "vertices": 100,+ "volume_mm3": 15355.286014502955+ },+ "seconds": 1.468559785,+ "status": "pass"},"ladder/11-cumulative-parts/001-bracket": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 10415.793632553658,+ "body_count": 1,+ "edges": 30,+ "faces": 12,+ "vertices": 20,+ "volume_mm3": 31550.35228808287+ },+ "seconds": 0.071211606,+ "status": "pass"},"ladder/11-cumulative-parts/002-flange": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 16258.85231664228,+ "body_count": 1,+ "edges": 31,+ "faces": 14,+ "vertices": 20,+ "volume_mm3": 55442.52558072023+ },+ "seconds": 0.502748653,+ "status": "pass"},"ladder/11-cumulative-parts/003-threaded-flange": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 18059.595491495795,+ "body_count": 1,+ "edges": 57,+ "faces": 22,+ "vertices": 38,+ "volume_mm3": 52446.67350160611+ },+ "seconds": 1.769302135,+ "status": "pass"},"ladder/11-cumulative-parts/004-housing": {- "seconds": null,- "status": "unsupported"+ "measured": {+ "area_mm2": 21277.09688631319,+ "body_count": 1,+ "edges": 172,+ "faces": 64,+ "vertices": 114,+ "volume_mm3": 15051.402626654897+ },+ "seconds": 2.09595716,+ "status": "pass"}- }+ },+ "reason": "twelve cases for the SMLib and tessellation fixes: point contact, near-coincident and merged faces, horn torus, crossing lofts, sealed and spherical shells"}diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.jsonindex 50a8ebb4b4..66cb900ccd 100644--- a/tests/kernel-cases/ladder/ladder.json+++ b/tests/kernel-cases/ladder/ladder.json@@ -3,10 +3,10 @@{"cases": ["ladder/01-primitives/001-box",- "ladder/01-primitives/002-cylinder",- "ladder/01-primitives/004-frustum",- "ladder/01-primitives/003-cone","ladder/01-primitives/005-sphere",+ "ladder/01-primitives/003-cone",+ "ladder/01-primitives/004-frustum",+ "ladder/01-primitives/002-cylinder","ladder/01-primitives/006-torus"],"tier": "01-primitives",@@ -15,40 +15,46 @@{"cases": ["ladder/02-booleans/004-edge-on-edge-no-overlap",- "ladder/02-booleans/003-pocket-flush-with-top",- "ladder/02-booleans/015-knife-edge-wedge-cut",- "ladder/02-booleans/002-coplanar-overlap-join",- "ladder/02-booleans/019-notch-flush-with-end-face","ladder/02-booleans/016-v-groove-pinches-bottom-to-line",- "ladder/02-booleans/013-cut-across-cylinder-seam",+ "ladder/02-booleans/015-knife-edge-wedge-cut","ladder/02-booleans/001-coincident-face-join",- "ladder/02-booleans/009-near-tangent-overlap-1e-3",+ "ladder/02-booleans/014-cut-through-sphere-pole","ladder/02-booleans/020-part-back-wall",- "ladder/02-booleans/005-vertex-on-face-no-overlap",- "ladder/02-booleans/018-hole-tangent-to-side-face",- "ladder/02-booleans/010-near-tangent-overlap-1e-6",- "ladder/02-booleans/006-tangent-along-line-no-overlap",+ "ladder/02-booleans/003-pocket-flush-with-top",+ "ladder/02-booleans/019-notch-flush-with-end-face",+ "ladder/02-booleans/002-coplanar-overlap-join","ladder/02-booleans/008-near-tangent-gap-1e-6",+ "ladder/02-booleans/010-near-tangent-overlap-1e-6","ladder/02-booleans/007-near-tangent-gap-1e-3","ladder/02-booleans/017-cylinder-tangent-top-and-bottom",+ "ladder/02-booleans/006-tangent-along-line-no-overlap",+ "ladder/02-booleans/018-hole-tangent-to-side-face",+ "ladder/02-booleans/009-near-tangent-overlap-1e-3",+ "ladder/02-booleans/005-vertex-on-face-no-overlap","ladder/02-booleans/011-tangent-along-circle-through-hole",- "ladder/02-booleans/014-cut-through-sphere-pole",- "ladder/02-booleans/012-tangent-along-circle-bowl"+ "ladder/02-booleans/013-cut-across-cylinder-seam",+ "ladder/02-booleans/012-tangent-along-circle-bowl",+ "ladder/02-booleans/022-cylinder-grazing-a-hole-edge",+ "ladder/02-booleans/021-holes-touching-at-a-point",+ "ladder/02-booleans/023-lips-1e-4-off-the-walls-joined",+ "ladder/02-booleans/024-wall-halves-merged-into-a-flange",+ "ladder/02-booleans/025-flush-chord-layers-joined"],"tier": "02-booleans","what": "booleans in the degeneracy classes, and cuts that end in a single line"},{"cases": [+ "ladder/03-analytic-profiles/006-revolve-partial-90",+ "ladder/03-analytic-profiles/008-extrude-slot","ladder/03-analytic-profiles/001-extrude-rect-with-arc-end",- "ladder/03-analytic-profiles/003-extrude-tapered-circle","ladder/03-analytic-profiles/007-revolve-180-touching-axis",- "ladder/03-analytic-profiles/008-extrude-slot","ladder/03-analytic-profiles/002-extrude-annulus","ladder/03-analytic-profiles/004-revolve-full-off-axis",- "ladder/03-analytic-profiles/006-revolve-partial-90",+ "ladder/03-analytic-profiles/003-extrude-tapered-circle",+ "ladder/03-analytic-profiles/009-part-boss-and-slot","ladder/03-analytic-profiles/005-revolve-touching-axis-hemisphere",- "ladder/03-analytic-profiles/009-part-boss-and-slot"+ "ladder/03-analytic-profiles/010-revolve-horn-torus-270"],"tier": "03-analytic-profiles","what": "extrudes and revolves of line-and-arc profiles"@@ -56,32 +62,34 @@{"cases": ["ladder/04-spline-profiles/001-extrude-bezier-arch",- "ladder/04-spline-profiles/008-loft-square-to-circle",- "ladder/04-spline-profiles/006-loft-circle-frustum",- "ladder/04-spline-profiles/007-loft-three-circles","ladder/04-spline-profiles/005-loft-square-frustum",+ "ladder/04-spline-profiles/008-loft-square-to-circle","ladder/04-spline-profiles/009-extrude-periodic-fit-spline",+ "ladder/04-spline-profiles/006-loft-circle-frustum","ladder/04-spline-profiles/004-sweep-square-along-bezier",- "ladder/04-spline-profiles/002-revolve-bezier-profile",+ "ladder/04-spline-profiles/007-loft-three-circles","ladder/04-spline-profiles/003-pipe-along-bezier",- "ladder/04-spline-profiles/010-part-bezier-window"+ "ladder/04-spline-profiles/002-revolve-bezier-profile",+ "ladder/04-spline-profiles/010-part-bezier-window",+ "ladder/04-spline-profiles/012-loft-ribs-joined-to-a-rounded-pad",+ "ladder/04-spline-profiles/011-crossing-pleated-loft-skins-joined"],"tier": "04-spline-profiles","what": "spline profiles, sweeps and lofts"},{"cases": [+ "ladder/05-holes-and-taps/006-tapped-m6-through",+ "ladder/05-holes-and-taps/009-hole-0.5-from-edge","ladder/05-holes-and-taps/010-hole-tangent-to-end-face",+ "ladder/05-holes-and-taps/003-drilled-blind-118",+ "ladder/05-holes-and-taps/007-tapped-m8-blind","ladder/05-holes-and-taps/002-simple-blind-flat",- "ladder/05-holes-and-taps/009-hole-0.5-from-edge","ladder/05-holes-and-taps/001-simple-through",- "ladder/05-holes-and-taps/006-tapped-m6-through","ladder/05-holes-and-taps/004-counterbore",- "ladder/05-holes-and-taps/007-tapped-m8-blind",- "ladder/05-holes-and-taps/003-drilled-blind-118","ladder/05-holes-and-taps/005-countersink",- "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face","ladder/05-holes-and-taps/011-crossing-holes-steinmetz",+ "ladder/05-holes-and-taps/008-tapped-m5-into-curved-face","ladder/05-holes-and-taps/012-crossing-tapped-holes-offset","ladder/05-holes-and-taps/013-part-holes"],@@ -91,13 +99,13 @@{"cases": ["ladder/06-threads/003-external-m10-partial-length",+ "ladder/06-threads/010-part-threaded-boss","ladder/06-threads/005-internal-m10-through","ladder/06-threads/004-external-m10-to-shoulder",+ "ladder/06-threads/007-external-m10-at-filleted-shoulder","ladder/06-threads/001-external-m10-full","ladder/06-threads/006-external-m10-into-chamfer","ladder/06-threads/002-external-m10x1-fine",- "ladder/06-threads/010-part-threaded-boss",- "ladder/06-threads/007-external-m10-at-filleted-shoulder","ladder/06-threads/008-multi-start-thread","ladder/06-threads/009-thread-runout-length"],@@ -106,21 +114,21 @@},{"cases": [+ "ladder/07-fillets/015-corner-g2-patch",+ "ladder/07-fillets/001-single-edge-r5","ladder/07-fillets/006-variable-r5-to-zero",+ "ladder/07-fillets/011-chain-ending-at-corner","ladder/07-fillets/005-variable-r5-to-r1",- "ladder/07-fillets/007-variable-r5-to-1e-3",- "ladder/07-fillets/015-corner-g2-patch",+ "ladder/07-fillets/009-corner-three-equal-r5","ladder/07-fillets/008-constant-r1e-3",+ "ladder/07-fillets/002-four-vertical-edges-r5",+ "ladder/07-fillets/007-variable-r5-to-1e-3",+ "ladder/07-fillets/010-corner-unequal-r7-r3","ladder/07-fillets/004-convex-and-concave-r5",- "ladder/07-fillets/001-single-edge-r5",+ "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7","ladder/07-fillets/012-variable-into-rounded-corner","ladder/07-fillets/014-curved-edge-r2",- "ladder/07-fillets/011-chain-ending-at-corner",- "ladder/07-fillets/002-four-vertical-edges-r5",- "ladder/07-fillets/009-corner-three-equal-r5",- "ladder/07-fillets/010-corner-unequal-r7-r3","ladder/07-fillets/003-tangent-chain-r3",- "ladder/07-fillets/016-corner-three-sequential-r5-r3-r7","ladder/07-fillets/017-part-rounds","ladder/07-fillets/013-corner-setback"],@@ -129,11 +137,11 @@},{"cases": [- "ladder/08-chamfers/002-two-distances-5-3",- "ladder/08-chamfers/001-equal-5","ladder/08-chamfers/003-distance-angle-5-30",+ "ladder/08-chamfers/002-two-distances-5-3","ladder/08-chamfers/005-corner-two-mitred-3","ladder/08-chamfers/004-corner-three-equal-3",+ "ladder/08-chamfers/001-equal-5","ladder/08-chamfers/007-chamfer-then-fillets","ladder/08-chamfers/006-curved-edge-2","ladder/08-chamfers/008-part-chamfers"@@ -143,16 +151,20 @@},{"cases": [- "ladder/09-shells-and-offsets/007-offset-top-face-5",- "ladder/09-shells-and-offsets/003-tube-two-open-faces",+ "ladder/09-shells-and-offsets/012-closed-shell-sealed-void","ladder/09-shells-and-offsets/001-box-open-top-t2",+ "ladder/09-shells-and-offsets/003-tube-two-open-faces","ladder/09-shells-and-offsets/004-thin-wall-0.2",+ "ladder/09-shells-and-offsets/007-offset-top-face-5","ladder/09-shells-and-offsets/009-shell-outside-t2","ladder/09-shells-and-offsets/008-offset-cylinder-wall-2",- "ladder/09-shells-and-offsets/002-cylinder-open-top-t1","ladder/09-shells-and-offsets/006-shell-rounds-r1-thinner-than-t2",- "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",+ "ladder/09-shells-and-offsets/002-cylinder-open-top-t1",+ "ladder/09-shells-and-offsets/014-drafted-box-with-rounds-shelled","ladder/09-shells-and-offsets/010-shell-under-rounded-top",+ "ladder/09-shells-and-offsets/005-shell-rounds-r5-t2",+ "ladder/09-shells-and-offsets/013-dome-shelled-from-base",+ "ladder/09-shells-and-offsets/015-shelled-dome-ring-joined-back","ladder/09-shells-and-offsets/011-part-shell"],"tier": "09-shells-and-offsets",@@ -161,8 +173,8 @@{"cases": ["ladder/10-patterns-and-mirrors/007-pattern-bodies",- "ladder/10-patterns-and-mirrors/005-mirror-feature","ladder/10-patterns-and-mirrors/004-mirror-body-joined",+ "ladder/10-patterns-and-mirrors/005-mirror-feature","ladder/10-patterns-and-mirrors/001-rect-pattern-holes","ladder/10-patterns-and-mirrors/003-overlapping-pattern-leaves-core","ladder/10-patterns-and-mirrors/002-circular-pattern-holes",@@ -174,8 +186,8 @@},{"cases": [- "ladder/11-cumulative-parts/002-flange","ladder/11-cumulative-parts/001-bracket",+ "ladder/11-cumulative-parts/002-flange","ladder/11-cumulative-parts/003-threaded-flange","ladder/11-cumulative-parts/004-housing"],