SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 66/509: kernel-cases: sweeps coil and surface cases from #793-#4056
Brennen Herbruckdcab94fcd7f6
diff --git a/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/expected.json b/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/expected.jsonnew file mode 100644index 0000000000..20780f7c26--- /dev/null+++ b/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1411"+ ],+ "what": "a 4-turn coil (centre diameter 40, wire 3 mm, pitch 8) intersected with a cylinder of radius 25 and height 40 that holds it (crash report: unclean exit in solid.coil)",+ "source": "analytic",+ "method": "the wire (radius 20 +- 1.5, z -1.5..33.5) lies wholly inside the cylinder (r 25, z -2..38), so the intersection is the coil: V = pi 1.5^2 * 2 pi 20 * 4 = 3553.1.",+ "body_count": 1,+ "volume_mm3": 3553.057584392169+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/recipe.json b/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/recipe.jsonnew file mode 100644index 0000000000..a8ef04feb7--- /dev/null+++ b/tests/kernel-cases/sweeps/1411-coil-intersected-with-a-cylinder-holding-it/recipe.json@@ -0,0 +1,30 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 25,+ "height": 40,+ "base": [+ 0,+ 0,+ -2+ ],+ "axis": "Z",+ "body_name": "Blank"+ }+ },+ {+ "command": "solid.coil",+ "params": {+ "diameter": 40,+ "revolutions": 4,+ "pitch": 8,+ "section_size": 3,+ "section": "circular",+ "section_position": "center",+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/expected.json b/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/expected.jsonnew file mode 100644index 0000000000..0d1ada5a91--- /dev/null+++ b/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#2552"+ ],+ "what": "a square-wire coil (diameter 10, section 0.9 inside, pitch 1.5, height 10) cut as a helical groove into the wall of a bore of radius 4.1 in a 30 x 30 x 12 block (crash report: unclean exit in solid.coil)",+ "source": "analytic",+ "method": "the coil section is 0.9 x 0.9 with centre radius 5 - 0.45 = 4.55, so it spans r 4.1 to 5.0 (its inner face is the bore wall) and turns 10/1.5 = 6.667 times: V_groove = 0.81 * 2 pi 4.55 * 6.667 = 154.4; V = 30 * 30 * 12 - pi 4.1^2 12 - V_groove = 10011.9. The groove opens into the bore (one body).",+ "body_count": 1,+ "volume_mm3": 10011.900066920465+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/recipe.json b/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/recipe.jsonnew file mode 100644index 0000000000..0130ecaa48--- /dev/null+++ b/tests/kernel-cases/sweeps/2552-thread-groove-cut-by-a-square-coil-in-a-bore/recipe.json@@ -0,0 +1,56 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 30,+ "width": 30,+ "height": 12,+ "corner": [+ -7,+ -7,+ -1+ ],+ "body_name": "Block"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 4.1,+ "height": 12,+ "base": [+ 8,+ 8,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Block"+ ]+ }+ },+ {+ "command": "solid.coil",+ "params": {+ "axis": "Z",+ "base": [+ 8,+ 8,+ 0+ ],+ "diameter": 10,+ "height": 10,+ "pitch": 1.5,+ "section": "square",+ "section_position": "inside",+ "section_size": 0.9,+ "name": "Helical thread groove",+ "operation": "cut",+ "targets": [+ "Block"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/expected.json b/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/expected.jsonnew file mode 100644index 0000000000..beab555497--- /dev/null+++ b/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/expected.json@@ -0,0 +1,23 @@+{+ "sources": [+ "tangency-labs/solidcraft#3088",+ "tangency-labs/solidcraft#3758"+ ],+ "what": "a 4-turn square coil (4 mm wire, pitch 9, outer diameter 30.8, section inside) joined round a cylinder of radius 15 and height 40, its ends flush with the cylinder end faces (hang of several minutes, crash report)",+ "source": "analytic",+ "method": "the wire is a 4 x 4 square, radial 11.4..15.4, axial +-2 about a path rising from z = 2 to 38, so its end faces touch z = 0 and z = 40. Inside r = 15 it merges with the cylinder; the ridge outside r = 15 is a 0.4 x 4 section at centroid radius 15.2 turned 4 times by the screw: V = pi 15^2 40 + 1.6 * 2 pi 15.2 * 4 = 28885.5. bbox r 15.4, z 0..40.",+ "body_count": 1,+ "volume_mm3": 28885.562148990564,+ "bbox": {+ "min": [+ -15.4,+ -15.4,+ 0+ ],+ "max": [+ 15.4,+ 15.4,+ 40+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/recipe.json b/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/recipe.jsonnew file mode 100644index 0000000000..97df3999d0--- /dev/null+++ b/tests/kernel-cases/sweeps/3088-coil-thread-joined-flush-with-a-cylinder/recipe.json@@ -0,0 +1,41 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 15,+ "height": 40,+ "base": [+ 0,+ 0,+ 0+ ],+ "axis": "Z",+ "body_name": "Body2"+ }+ },+ {+ "command": "solid.coil",+ "params": {+ "axis": "Z",+ "base": [+ 0,+ 0,+ 2+ ],+ "clockwise": true,+ "diameter": 30.8,+ "height": 36,+ "name": "HoseThread",+ "operation": "join",+ "pitch": 9,+ "section": "square",+ "section_position": "inside",+ "section_size": 4,+ "targets": [+ "Body2"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/expected.json b/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/expected.jsonnew file mode 100644index 0000000000..227bc48c41--- /dev/null+++ b/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3832"+ ],+ "what": "a 7-turn coil (centre diameter 80, wire 1 mm, pitch -2 so it winds downward) cut from a cylinder that holds it entirely (boolean Cut: no result)",+ "source": "analytic",+ "method": "cylinder r 45, z -20..20 holds the wire (r 40 +- 0.5, z 0 down to -14) wholly, leaving a helical tunnel sealed inside (a body with an internal void: the expected shell count is 2, which the rig cannot grade, so valid is false): V = pi 45^2 40 - pi 0.5^2 * 2 pi 40 * 7 = 253087.3.",+ "valid": false,+ "body_count": 1,+ "volume_mm3": 253087.26032462073+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/recipe.json b/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/recipe.jsonnew file mode 100644index 0000000000..d89af021e2--- /dev/null+++ b/tests/kernel-cases/sweeps/3832-coil-cut-with-negative-pitch-inside-a-cylinder/recipe.json@@ -0,0 +1,35 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 45,+ "height": 40,+ "base": [+ 0,+ 0,+ -20+ ],+ "axis": "Z",+ "body_name": "Blank"+ }+ },+ {+ "command": "solid.coil",+ "params": {+ "diameter": 80,+ "revolutions": 7,+ "pitch": -2,+ "section_size": 1,+ "section": "circular",+ "section_position": "center",+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "cut"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/expected.json b/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/expected.jsonnew file mode 100644index 0000000000..80777a13ce--- /dev/null+++ b/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/expected.json@@ -0,0 +1,23 @@+{+ "sources": [+ "tangency-labs/solidcraft#3862",+ "tangency-labs/solidcraft#3915"+ ],+ "what": "a clockwise 5-turn coil of 4 mm square wire placed outside a 40 mm diameter, pitch 8 (the section, position and direction parameters)",+ "source": "analytic",+ "method": "outside puts the wire centre at radius 20 + 2 = 22 (radial 20..24); the 4 x 4 section turned 5 times by the screw: V = 16 * 2 pi 22 * 5 = 11060.6. bbox r 24, z from -2 to 40 + 2.",+ "body_count": 1,+ "volume_mm3": 11058.40614063607,+ "bbox": {+ "min": [+ -24,+ -24,+ -2+ ],+ "max": [+ 24,+ 24,+ 42+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/recipe.json b/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/recipe.jsonnew file mode 100644index 0000000000..8ae6db1cf7--- /dev/null+++ b/tests/kernel-cases/sweeps/3862-coil-square-wire-outside-the-diameter/recipe.json@@ -0,0 +1,18 @@+{+ "commands": [+ {+ "command": "solid.coil",+ "params": {+ "diameter": 40,+ "revolutions": 5,+ "pitch": 8,+ "section_size": 4,+ "section": "square",+ "section_position": "outside",+ "clockwise": true,+ "name": "Spring",+ "operation": "new"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/expected.json b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/expected.jsonnew file mode 100644index 0000000000..1345fb3539--- /dev/null+++ b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#4056",+ "tangency-labs/solidcraft#4080"+ ],+ "what": "a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), bow to stern, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: \"a guide rail crosses section 2's plane\")",+ "source": "analytic",+ "method": "with straight sections and straight rails the surface is the bilinear patch S(t,s) = (100 t, 40 t s, 20 s), which contains both rails (s = 0: keel, s = 1: sheer) and both sections (t = 0, 1); S_t = (100, 40 s, 0), S_s = (0, 40 t, 20), cross = (800 s, -2000, 4000 t); A = double integral of its length = 2995.833 (Gauss-Legendre). One face, open (valid false); bbox 0..100, 0..40, 0..20. The loft is independent of the order of the sections.",+ "valid": false,+ "area_mm2": 2995.832811766292,+ "faces": 1,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 100,+ 40,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/recipe.json b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/recipe.jsonnew file mode 100644index 0000000000..12438cb464--- /dev/null+++ b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-bow-to-stern/recipe.json@@ -0,0 +1,221 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Bow"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 0,+ 20+ ]+ ],+ "infer": false,+ "ids": [+ "b1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Stern"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 40,+ 20+ ]+ ],+ "infer": false,+ "ids": [+ "s1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Keel"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 100,+ 0+ ]+ ],+ "infer": false,+ "ids": [+ "k1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 20.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Sheer"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 100,+ 40+ ]+ ],+ "infer": false,+ "ids": [+ "h1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.loft",+ "params": {+ "sections": [+ {+ "sketch": "Bow",+ "curves": [+ "b1"+ ]+ },+ {+ "sketch": "Stern",+ "curves": [+ "s1"+ ]+ }+ ],+ "rails": [+ {+ "sketch": "Keel",+ "curves": [+ "k1"+ ]+ },+ {+ "sketch": "Sheer",+ "curves": [+ "h1"+ ]+ }+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/expected.json b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/expected.jsonnew file mode 100644index 0000000000..4c1da8b8dc--- /dev/null+++ b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#4056",+ "tangency-labs/solidcraft#4080"+ ],+ "what": "a surface loft between a vertical line on XZ (bow) and a slanted line in the plane x = 100 (stern), stern to bow, guided by a keel rail lying in the bow sketch plane and a sheer rail at z = 20 (refused: \"a guide rail crosses section 2's plane\")",+ "source": "analytic",+ "method": "with straight sections and straight rails the surface is the bilinear patch S(t,s) = (100 t, 40 t s, 20 s), which contains both rails (s = 0: keel, s = 1: sheer) and both sections (t = 0, 1); S_t = (100, 40 s, 0), S_s = (0, 40 t, 20), cross = (800 s, -2000, 4000 t); A = double integral of its length = 2995.833 (Gauss-Legendre). One face, open (valid false); bbox 0..100, 0..40, 0..20. The loft is independent of the order of the sections.",+ "valid": false,+ "area_mm2": 2995.832811766292,+ "faces": 1,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 100,+ 40,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/recipe.json b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/recipe.jsonnew file mode 100644index 0000000000..a3543aa8e8--- /dev/null+++ b/tests/kernel-cases/sweeps/4056-surface-loft-rails-straight-section-in-a-rail-plane-stern-to-bow/recipe.json@@ -0,0 +1,221 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Bow"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 0,+ 20+ ]+ ],+ "infer": false,+ "ids": [+ "b1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 100.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Stern"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 40,+ 20+ ]+ ],+ "infer": false,+ "ids": [+ "s1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Keel"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 100,+ 0+ ]+ ],+ "infer": false,+ "ids": [+ "k1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 20.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Sheer"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 100,+ 40+ ]+ ],+ "infer": false,+ "ids": [+ "h1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.loft",+ "params": {+ "sections": [+ {+ "sketch": "Stern",+ "curves": [+ "s1"+ ]+ },+ {+ "sketch": "Bow",+ "curves": [+ "b1"+ ]+ }+ ],+ "rails": [+ {+ "sketch": "Keel",+ "curves": [+ "k1"+ ]+ },+ {+ "sketch": "Sheer",+ "curves": [+ "h1"+ ]+ }+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/expected.json b/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/expected.jsonnew file mode 100644index 0000000000..41191ca747--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#757",+ "tangency-labs/solidcraft#847"+ ],+ "what": "a surface loft between the line (0,0,0)-(10,0,0) and the line (0,0,20)-(10,6,20): a ruled (bilinear) strip",+ "source": "analytic",+ "method": "S(u,v) = (1-v)(10u,0,0) + v(10u,6u,20): S_u = (10, 6v, 0), S_v = (0, 6u, 20), S_u x S_v = (120 v, -200, 60 u); A = double integral over the unit square of sqrt(14400 v^2 + 40000 + 3600 u^2) = 214.2336 (Gauss-Legendre, 48 points each way). One face, open (valid false).",+ "valid": false,+ "area_mm2": 214.23356244227966,+ "faces": 1,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 10,+ 6,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/recipe.json b/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/recipe.jsonnew file mode 100644index 0000000000..147a4d558c--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-loft-ruled-strip-between-two-lines/recipe.json@@ -0,0 +1,115 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 10,+ 0+ ]+ ],+ "infer": false,+ "ids": [+ "c1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 20.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0+ ],+ [+ 10,+ 6+ ]+ ],+ "infer": false,+ "ids": [+ "c2"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.loft",+ "params": {+ "sections": [+ {+ "sketch": "A",+ "curves": [+ "c1"+ ]+ },+ {+ "sketch": "B",+ "curves": [+ "c2"+ ]+ }+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/expected.json b/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/expected.jsonnew file mode 100644index 0000000000..407e3ecff2--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#757",+ "tangency-labs/solidcraft#824"+ ],+ "what": "a line from (5,0) to (10,20) revolved a full turn into a surface body (a cone frustum wall, no caps)",+ "source": "analytic",+ "method": "lateral area of a frustum: pi (r1 + r2) slant = pi 15 sqrt(5^2 + 20^2) = 971.48; one conical face; open at both ends, so not a solid (valid false); bbox r 10, z 0..20.",+ "valid": false,+ "area_mm2": 971.4838757561392,+ "faces": 1,+ "bbox": {+ "min": [+ -10,+ -10,+ 0+ ],+ "max": [+ 10,+ 10,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/recipe.json b/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/recipe.jsonnew file mode 100644index 0000000000..ff787e98b1--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-revolve-line-cone-frustum-sheet/recipe.json@@ -0,0 +1,60 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "P"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 5,+ 0+ ],+ [+ 10,+ 20+ ]+ ],+ "infer": false,+ "ids": [+ "l1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.revolve",+ "params": {+ "curves": [+ "l1"+ ],+ "axis": "y",+ "angle": "360 deg"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/expected.json b/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/expected.jsonnew file mode 100644index 0000000000..d9c31a7d27--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/expected.json@@ -0,0 +1,24 @@+{+ "sources": [+ "tangency-labs/solidcraft#757",+ "tangency-labs/solidcraft#843"+ ],+ "what": "a slanted line (from (20,0,0) to (30,0,10)) swept as a surface round a quarter circle of radius 20 about Z",+ "source": "analytic",+ "method": "the profile lies in a plane through the Z axis and the path is a circle about that axis, so the sheet is a quarter of a cone frustum wall: A = (1/4) pi (r1 + r2) slant = (1/4) pi 50 sqrt(200) = 555.4; one face; open (valid false); bbox x, y 0..30, z 0..10.",+ "valid": false,+ "area_mm2": 555.3603672697958,+ "faces": 1,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 30,+ 30,+ 10+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/recipe.json b/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/recipe.jsonnew file mode 100644index 0000000000..216f89d484--- /dev/null+++ b/tests/kernel-cases/sweeps/757-surface-sweep-slanted-line-round-a-quarter-arc/recipe.json@@ -0,0 +1,107 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "Path"+ }+ },+ {+ "command": "sketch.arc.center_point",+ "params": {+ "center": [+ 0,+ 0+ ],+ "start": [+ 20,+ 0+ ],+ "end": [+ 0,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0.0,+ 0.0,+ 0.0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Sec"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20,+ 0+ ],+ [+ 30,+ 10+ ]+ ],+ "infer": false,+ "ids": [+ "c1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.sweep",+ "params": {+ "sketch": "Sec",+ "curves": [+ "c1"+ ],+ "path_sketch": "Path",+ "path": [+ "a1"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/expected.json b/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/expected.jsonnew file mode 100644index 0000000000..6402b9e5dc--- /dev/null+++ b/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#793"+ ],+ "what": "the same coil trimmed flat by cutting away everything above z = 12.5 with a box (trimming a coil to length)",+ "source": "analytic",+ "method": "a disc of radius 1 whose centre rises with the screw (z0 = 4 theta / 2 pi) keeps the part below z = 12.5, symmetric about its vertical diameter, so its centroid stays at radius R = 20: V = R (2 pi / p) integral over z0 in [0,24] of Ak(12.5 - z0) dz0 with Ak(h) = rs^2 (t sqrt(1-t^2) + asin t + pi/2), t = h/rs, clamped to 0 below -rs and pi rs^2 above rs: V = 1234.893 (Gauss-Legendre).",+ "body_count": 1,+ "volume_mm3": 1234.8927457642485+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/recipe.json b/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/recipe.jsonnew file mode 100644index 0000000000..b78d9c5365--- /dev/null+++ b/tests/kernel-cases/sweeps/793-coil-cut-by-a-box-above-a-plane/recipe.json@@ -0,0 +1,46 @@+{+ "commands": [+ {+ "command": "solid.coil",+ "params": {+ "diameter": 40,+ "revolutions": 6,+ "pitch": 4.0,+ "section_size": 2.0,+ "section": "circular",+ "section_position": "center",+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "new",+ "body_name": "Spring"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 60,+ "width": 60,+ "height": 20,+ "corner": [+ -30,+ -30,+ 12.5+ ],+ "body_name": "Above"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Spring",+ "tools": [+ "Above"+ ],+ "operation": "cut"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/expected.json b/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/expected.jsonnew file mode 100644index 0000000000..b52b46331f--- /dev/null+++ b/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#793"+ ],+ "what": "a 6-turn coil (centre diameter 40, wire 2 mm, pitch 4) split by the plane z = 12.5 square to its axis (\"boolean Intersect: no result\")",+ "source": "analytic",+ "method": "the wire is a circle of radius 1 turned by a screw motion about Z (section in a plane through the axis): V = pi r^2 * 2 pi R * N = pi * 2 pi 20 * 6 = 2368.7. Splitting does not change the total, the plane cuts the helix obliquely and each half stays one connected spiral: two bodies whose volumes add up to the coil.",+ "body_count": 2,+ "volume_mm3": 2368.705056261446,+ "bbox": {+ "min": [+ -21,+ -21,+ -1+ ],+ "max": [+ 21,+ 21,+ 25+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/recipe.json b/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/recipe.jsonnew file mode 100644index 0000000000..d0374f2f50--- /dev/null+++ b/tests/kernel-cases/sweeps/793-coil-split-by-a-plane-across-its-axis/recipe.json@@ -0,0 +1,40 @@+{+ "commands": [+ {+ "command": "solid.coil",+ "params": {+ "diameter": 40,+ "revolutions": 6,+ "pitch": 4.0,+ "section_size": 2.0,+ "section": "circular",+ "section_position": "center",+ "base": [+ 0,+ 0,+ 0+ ],+ "operation": "new",+ "body_name": "Spring"+ }+ },+ {+ "command": "solid.split_body",+ "params": {+ "body": "Spring",+ "plane": {+ "origin": [+ 0,+ 0,+ 12.5+ ],+ "normal": [+ 0,+ 0,+ 1+ ]+ }+ }+ }+ ]+}\ No newline at end of file