SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 48/509: kernel-cases: booleans from #3404-#4124 (28 cases, 76 skipped)
bherbruckdd6ab191aad6
diff --git a/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.json b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.jsonnew file mode 100644index 0000000000..376ed9cab7--- /dev/null+++ b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3447",+ "tangency-labs/solidcraft#2979"+ ],+ "what": "split body where the splitting plane contains an end face (with a boss on it and an R1 fillet on the face's edge)",+ "source": "analytic",+ "method": "block x -10..-3.5 is 6.5x50x52.7 = 17128.75 minus the R1 fillet along its 52.7 long edge ((1-pi/4)*1^2*52.7 = 11.31); boss 8.5x20x20.2 = 3434.0 stands on x=-3.5 face. The plane x=-3.5 splits them into two bodies: 17117.44 and 3434.0. (The PR measured 17116.17 for the first, within the 1e-3 tolerance.)",+ "body_count": 2,+ "volume_mm3": 20550.19+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.json b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.jsonnew file mode 100644index 0000000000..d787d12422--- /dev/null+++ b/tests/kernel-cases/booleans/3447-split-along-plane-of-a-face/recipe.json@@ -0,0 +1,62 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -10,+ 0,+ -25+ ],+ "length": 6.5,+ "width": 50,+ "height": 52.7,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -3.5,+ 30,+ 7.5+ ],+ "length": 8.5,+ "width": 20,+ "height": 20.2,+ "operation": "join",+ "targets": [+ "Block"+ ]+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ -3.5,+ 0,+ 0+ ]+ ],+ "radius": 1+ }+ },+ {+ "command": "solid.split_body",+ "params": {+ "body": "Block",+ "tool": {+ "body": "Block",+ "point": [+ -3.5,+ 15,+ -10+ ]+ }+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.json b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.jsonnew file mode 100644index 0000000000..2aa2922b6a--- /dev/null+++ b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3455"+ ],+ "what": "one combine of 64 separate pegs that do not touch: 36 s on truck, growing 4-9x per doubling; must finish in seconds",+ "source": "analytic",+ "method": "64 non-touching 48-gon pegs of circumradius 2, 1 mm tall, 6 mm apart: each area 0.5*48*2^2*sin(2pi/48) = 12.5305, V = 64 * 12.5305 * 1. The join keeps them in one body (several lumps). A hang is a failure: time should grow with the number of bodies. valid is false only because the one body holds 64 separate shells, which the rig's one-shell check does not allow",+ "body_count": 1,+ "volume_mm3": 801.9529,+ "valid": false+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.json b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.jsonnew file mode 100644index 0000000000..530e728156--- /dev/null+++ b/tests/kernel-cases/booleans/3455-join-of-64-separate-pegs/recipe.json@@ -0,0 +1,12896 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Pegs"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 0.0+ ],+ [+ 1.9829,+ 0.2611+ ],+ [+ 1.9319,+ 0.5176+ ],+ [+ 1.8478,+ 0.7654+ ],+ [+ 1.7321,+ 1.0+ ],+ [+ 1.5867,+ 1.2175+ ],+ [+ 1.4142,+ 1.4142+ ],+ [+ 1.2175,+ 1.5867+ ],+ [+ 1.0,+ 1.7321+ ],+ [+ 0.7654,+ 1.8478+ ],+ [+ 0.5176,+ 1.9319+ ],+ [+ 0.2611,+ 1.9829+ ],+ [+ 0.0,+ 2.0+ ],+ [+ -0.2611,+ 1.9829+ ],+ [+ -0.5176,+ 1.9319+ ],+ [+ -0.7654,+ 1.8478+ ],+ [+ -1.0,+ 1.7321+ ],+ [+ -1.2175,+ 1.5867+ ],+ [+ -1.4142,+ 1.4142+ ],+ [+ -1.5867,+ 1.2175+ ],+ [+ -1.7321,+ 1.0+ ],+ [+ -1.8478,+ 0.7654+ ],+ [+ -1.9319,+ 0.5176+ ],+ [+ -1.9829,+ 0.2611+ ],+ [+ -2.0,+ 0.0+ ],+ [+ -1.9829,+ -0.2611+ ],+ [+ -1.9319,+ -0.5176+ ],+ [+ -1.8478,+ -0.7654+ ],+ [+ -1.7321,+ -1.0+ ],+ [+ -1.5867,+ -1.2175+ ],+ [+ -1.4142,+ -1.4142+ ],+ [+ -1.2175,+ -1.5867+ ],+ [+ -1.0,+ -1.7321+ ],+ [+ -0.7654,+ -1.8478+ ],+ [+ -0.5176,+ -1.9319+ ],+ [+ -0.2611,+ -1.9829+ ],+ [+ -0.0,+ -2.0+ ],+ [+ 0.2611,+ -1.9829+ ],+ [+ 0.5176,+ -1.9319+ ],+ [+ 0.7654,+ -1.8478+ ],+ [+ 1.0,+ -1.7321+ ],+ [+ 1.2175,+ -1.5867+ ],+ [+ 1.4142,+ -1.4142+ ],+ [+ 1.5867,+ -1.2175+ ],+ [+ 1.7321,+ -1.0+ ],+ [+ 1.8478,+ -0.7654+ ],+ [+ 1.9319,+ -0.5176+ ],+ [+ 1.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 0.0+ ],+ [+ 7.9829,+ 0.2611+ ],+ [+ 7.9319,+ 0.5176+ ],+ [+ 7.8478,+ 0.7654+ ],+ [+ 7.7321,+ 1.0+ ],+ [+ 7.5867,+ 1.2175+ ],+ [+ 7.4142,+ 1.4142+ ],+ [+ 7.2175,+ 1.5867+ ],+ [+ 7.0,+ 1.7321+ ],+ [+ 6.7654,+ 1.8478+ ],+ [+ 6.5176,+ 1.9319+ ],+ [+ 6.2611,+ 1.9829+ ],+ [+ 6.0,+ 2.0+ ],+ [+ 5.7389,+ 1.9829+ ],+ [+ 5.4824,+ 1.9319+ ],+ [+ 5.2346,+ 1.8478+ ],+ [+ 5.0,+ 1.7321+ ],+ [+ 4.7825,+ 1.5867+ ],+ [+ 4.5858,+ 1.4142+ ],+ [+ 4.4133,+ 1.2175+ ],+ [+ 4.2679,+ 1.0+ ],+ [+ 4.1522,+ 0.7654+ ],+ [+ 4.0681,+ 0.5176+ ],+ [+ 4.0171,+ 0.2611+ ],+ [+ 4.0,+ 0.0+ ],+ [+ 4.0171,+ -0.2611+ ],+ [+ 4.0681,+ -0.5176+ ],+ [+ 4.1522,+ -0.7654+ ],+ [+ 4.2679,+ -1.0+ ],+ [+ 4.4133,+ -1.2175+ ],+ [+ 4.5858,+ -1.4142+ ],+ [+ 4.7825,+ -1.5867+ ],+ [+ 5.0,+ -1.7321+ ],+ [+ 5.2346,+ -1.8478+ ],+ [+ 5.4824,+ -1.9319+ ],+ [+ 5.7389,+ -1.9829+ ],+ [+ 6.0,+ -2.0+ ],+ [+ 6.2611,+ -1.9829+ ],+ [+ 6.5176,+ -1.9319+ ],+ [+ 6.7654,+ -1.8478+ ],+ [+ 7.0,+ -1.7321+ ],+ [+ 7.2175,+ -1.5867+ ],+ [+ 7.4142,+ -1.4142+ ],+ [+ 7.5867,+ -1.2175+ ],+ [+ 7.7321,+ -1.0+ ],+ [+ 7.8478,+ -0.7654+ ],+ [+ 7.9319,+ -0.5176+ ],+ [+ 7.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 0.0+ ],+ [+ 13.9829,+ 0.2611+ ],+ [+ 13.9319,+ 0.5176+ ],+ [+ 13.8478,+ 0.7654+ ],+ [+ 13.7321,+ 1.0+ ],+ [+ 13.5867,+ 1.2175+ ],+ [+ 13.4142,+ 1.4142+ ],+ [+ 13.2175,+ 1.5867+ ],+ [+ 13.0,+ 1.7321+ ],+ [+ 12.7654,+ 1.8478+ ],+ [+ 12.5176,+ 1.9319+ ],+ [+ 12.2611,+ 1.9829+ ],+ [+ 12.0,+ 2.0+ ],+ [+ 11.7389,+ 1.9829+ ],+ [+ 11.4824,+ 1.9319+ ],+ [+ 11.2346,+ 1.8478+ ],+ [+ 11.0,+ 1.7321+ ],+ [+ 10.7825,+ 1.5867+ ],+ [+ 10.5858,+ 1.4142+ ],+ [+ 10.4133,+ 1.2175+ ],+ [+ 10.2679,+ 1.0+ ],+ [+ 10.1522,+ 0.7654+ ],+ [+ 10.0681,+ 0.5176+ ],+ [+ 10.0171,+ 0.2611+ ],+ [+ 10.0,+ 0.0+ ],+ [+ 10.0171,+ -0.2611+ ],+ [+ 10.0681,+ -0.5176+ ],+ [+ 10.1522,+ -0.7654+ ],+ [+ 10.2679,+ -1.0+ ],+ [+ 10.4133,+ -1.2175+ ],+ [+ 10.5858,+ -1.4142+ ],+ [+ 10.7825,+ -1.5867+ ],+ [+ 11.0,+ -1.7321+ ],+ [+ 11.2346,+ -1.8478+ ],+ [+ 11.4824,+ -1.9319+ ],+ [+ 11.7389,+ -1.9829+ ],+ [+ 12.0,+ -2.0+ ],+ [+ 12.2611,+ -1.9829+ ],+ [+ 12.5176,+ -1.9319+ ],+ [+ 12.7654,+ -1.8478+ ],+ [+ 13.0,+ -1.7321+ ],+ [+ 13.2175,+ -1.5867+ ],+ [+ 13.4142,+ -1.4142+ ],+ [+ 13.5867,+ -1.2175+ ],+ [+ 13.7321,+ -1.0+ ],+ [+ 13.8478,+ -0.7654+ ],+ [+ 13.9319,+ -0.5176+ ],+ [+ 13.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 0.0+ ],+ [+ 19.9829,+ 0.2611+ ],+ [+ 19.9319,+ 0.5176+ ],+ [+ 19.8478,+ 0.7654+ ],+ [+ 19.7321,+ 1.0+ ],+ [+ 19.5867,+ 1.2175+ ],+ [+ 19.4142,+ 1.4142+ ],+ [+ 19.2175,+ 1.5867+ ],+ [+ 19.0,+ 1.7321+ ],+ [+ 18.7654,+ 1.8478+ ],+ [+ 18.5176,+ 1.9319+ ],+ [+ 18.2611,+ 1.9829+ ],+ [+ 18.0,+ 2.0+ ],+ [+ 17.7389,+ 1.9829+ ],+ [+ 17.4824,+ 1.9319+ ],+ [+ 17.2346,+ 1.8478+ ],+ [+ 17.0,+ 1.7321+ ],+ [+ 16.7825,+ 1.5867+ ],+ [+ 16.5858,+ 1.4142+ ],+ [+ 16.4133,+ 1.2175+ ],+ [+ 16.2679,+ 1.0+ ],+ [+ 16.1522,+ 0.7654+ ],+ [+ 16.0681,+ 0.5176+ ],+ [+ 16.0171,+ 0.2611+ ],+ [+ 16.0,+ 0.0+ ],+ [+ 16.0171,+ -0.2611+ ],+ [+ 16.0681,+ -0.5176+ ],+ [+ 16.1522,+ -0.7654+ ],+ [+ 16.2679,+ -1.0+ ],+ [+ 16.4133,+ -1.2175+ ],+ [+ 16.5858,+ -1.4142+ ],+ [+ 16.7825,+ -1.5867+ ],+ [+ 17.0,+ -1.7321+ ],+ [+ 17.2346,+ -1.8478+ ],+ [+ 17.4824,+ -1.9319+ ],+ [+ 17.7389,+ -1.9829+ ],+ [+ 18.0,+ -2.0+ ],+ [+ 18.2611,+ -1.9829+ ],+ [+ 18.5176,+ -1.9319+ ],+ [+ 18.7654,+ -1.8478+ ],+ [+ 19.0,+ -1.7321+ ],+ [+ 19.2175,+ -1.5867+ ],+ [+ 19.4142,+ -1.4142+ ],+ [+ 19.5867,+ -1.2175+ ],+ [+ 19.7321,+ -1.0+ ],+ [+ 19.8478,+ -0.7654+ ],+ [+ 19.9319,+ -0.5176+ ],+ [+ 19.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 0.0+ ],+ [+ 25.9829,+ 0.2611+ ],+ [+ 25.9319,+ 0.5176+ ],+ [+ 25.8478,+ 0.7654+ ],+ [+ 25.7321,+ 1.0+ ],+ [+ 25.5867,+ 1.2175+ ],+ [+ 25.4142,+ 1.4142+ ],+ [+ 25.2175,+ 1.5867+ ],+ [+ 25.0,+ 1.7321+ ],+ [+ 24.7654,+ 1.8478+ ],+ [+ 24.5176,+ 1.9319+ ],+ [+ 24.2611,+ 1.9829+ ],+ [+ 24.0,+ 2.0+ ],+ [+ 23.7389,+ 1.9829+ ],+ [+ 23.4824,+ 1.9319+ ],+ [+ 23.2346,+ 1.8478+ ],+ [+ 23.0,+ 1.7321+ ],+ [+ 22.7825,+ 1.5867+ ],+ [+ 22.5858,+ 1.4142+ ],+ [+ 22.4133,+ 1.2175+ ],+ [+ 22.2679,+ 1.0+ ],+ [+ 22.1522,+ 0.7654+ ],+ [+ 22.0681,+ 0.5176+ ],+ [+ 22.0171,+ 0.2611+ ],+ [+ 22.0,+ 0.0+ ],+ [+ 22.0171,+ -0.2611+ ],+ [+ 22.0681,+ -0.5176+ ],+ [+ 22.1522,+ -0.7654+ ],+ [+ 22.2679,+ -1.0+ ],+ [+ 22.4133,+ -1.2175+ ],+ [+ 22.5858,+ -1.4142+ ],+ [+ 22.7825,+ -1.5867+ ],+ [+ 23.0,+ -1.7321+ ],+ [+ 23.2346,+ -1.8478+ ],+ [+ 23.4824,+ -1.9319+ ],+ [+ 23.7389,+ -1.9829+ ],+ [+ 24.0,+ -2.0+ ],+ [+ 24.2611,+ -1.9829+ ],+ [+ 24.5176,+ -1.9319+ ],+ [+ 24.7654,+ -1.8478+ ],+ [+ 25.0,+ -1.7321+ ],+ [+ 25.2175,+ -1.5867+ ],+ [+ 25.4142,+ -1.4142+ ],+ [+ 25.5867,+ -1.2175+ ],+ [+ 25.7321,+ -1.0+ ],+ [+ 25.8478,+ -0.7654+ ],+ [+ 25.9319,+ -0.5176+ ],+ [+ 25.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 0.0+ ],+ [+ 31.9829,+ 0.2611+ ],+ [+ 31.9319,+ 0.5176+ ],+ [+ 31.8478,+ 0.7654+ ],+ [+ 31.7321,+ 1.0+ ],+ [+ 31.5867,+ 1.2175+ ],+ [+ 31.4142,+ 1.4142+ ],+ [+ 31.2175,+ 1.5867+ ],+ [+ 31.0,+ 1.7321+ ],+ [+ 30.7654,+ 1.8478+ ],+ [+ 30.5176,+ 1.9319+ ],+ [+ 30.2611,+ 1.9829+ ],+ [+ 30.0,+ 2.0+ ],+ [+ 29.7389,+ 1.9829+ ],+ [+ 29.4824,+ 1.9319+ ],+ [+ 29.2346,+ 1.8478+ ],+ [+ 29.0,+ 1.7321+ ],+ [+ 28.7825,+ 1.5867+ ],+ [+ 28.5858,+ 1.4142+ ],+ [+ 28.4133,+ 1.2175+ ],+ [+ 28.2679,+ 1.0+ ],+ [+ 28.1522,+ 0.7654+ ],+ [+ 28.0681,+ 0.5176+ ],+ [+ 28.0171,+ 0.2611+ ],+ [+ 28.0,+ 0.0+ ],+ [+ 28.0171,+ -0.2611+ ],+ [+ 28.0681,+ -0.5176+ ],+ [+ 28.1522,+ -0.7654+ ],+ [+ 28.2679,+ -1.0+ ],+ [+ 28.4133,+ -1.2175+ ],+ [+ 28.5858,+ -1.4142+ ],+ [+ 28.7825,+ -1.5867+ ],+ [+ 29.0,+ -1.7321+ ],+ [+ 29.2346,+ -1.8478+ ],+ [+ 29.4824,+ -1.9319+ ],+ [+ 29.7389,+ -1.9829+ ],+ [+ 30.0,+ -2.0+ ],+ [+ 30.2611,+ -1.9829+ ],+ [+ 30.5176,+ -1.9319+ ],+ [+ 30.7654,+ -1.8478+ ],+ [+ 31.0,+ -1.7321+ ],+ [+ 31.2175,+ -1.5867+ ],+ [+ 31.4142,+ -1.4142+ ],+ [+ 31.5867,+ -1.2175+ ],+ [+ 31.7321,+ -1.0+ ],+ [+ 31.8478,+ -0.7654+ ],+ [+ 31.9319,+ -0.5176+ ],+ [+ 31.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 0.0+ ],+ [+ 37.9829,+ 0.2611+ ],+ [+ 37.9319,+ 0.5176+ ],+ [+ 37.8478,+ 0.7654+ ],+ [+ 37.7321,+ 1.0+ ],+ [+ 37.5867,+ 1.2175+ ],+ [+ 37.4142,+ 1.4142+ ],+ [+ 37.2175,+ 1.5867+ ],+ [+ 37.0,+ 1.7321+ ],+ [+ 36.7654,+ 1.8478+ ],+ [+ 36.5176,+ 1.9319+ ],+ [+ 36.2611,+ 1.9829+ ],+ [+ 36.0,+ 2.0+ ],+ [+ 35.7389,+ 1.9829+ ],+ [+ 35.4824,+ 1.9319+ ],+ [+ 35.2346,+ 1.8478+ ],+ [+ 35.0,+ 1.7321+ ],+ [+ 34.7825,+ 1.5867+ ],+ [+ 34.5858,+ 1.4142+ ],+ [+ 34.4133,+ 1.2175+ ],+ [+ 34.2679,+ 1.0+ ],+ [+ 34.1522,+ 0.7654+ ],+ [+ 34.0681,+ 0.5176+ ],+ [+ 34.0171,+ 0.2611+ ],+ [+ 34.0,+ 0.0+ ],+ [+ 34.0171,+ -0.2611+ ],+ [+ 34.0681,+ -0.5176+ ],+ [+ 34.1522,+ -0.7654+ ],+ [+ 34.2679,+ -1.0+ ],+ [+ 34.4133,+ -1.2175+ ],+ [+ 34.5858,+ -1.4142+ ],+ [+ 34.7825,+ -1.5867+ ],+ [+ 35.0,+ -1.7321+ ],+ [+ 35.2346,+ -1.8478+ ],+ [+ 35.4824,+ -1.9319+ ],+ [+ 35.7389,+ -1.9829+ ],+ [+ 36.0,+ -2.0+ ],+ [+ 36.2611,+ -1.9829+ ],+ [+ 36.5176,+ -1.9319+ ],+ [+ 36.7654,+ -1.8478+ ],+ [+ 37.0,+ -1.7321+ ],+ [+ 37.2175,+ -1.5867+ ],+ [+ 37.4142,+ -1.4142+ ],+ [+ 37.5867,+ -1.2175+ ],+ [+ 37.7321,+ -1.0+ ],+ [+ 37.8478,+ -0.7654+ ],+ [+ 37.9319,+ -0.5176+ ],+ [+ 37.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 0.0+ ],+ [+ 43.9829,+ 0.2611+ ],+ [+ 43.9319,+ 0.5176+ ],+ [+ 43.8478,+ 0.7654+ ],+ [+ 43.7321,+ 1.0+ ],+ [+ 43.5867,+ 1.2175+ ],+ [+ 43.4142,+ 1.4142+ ],+ [+ 43.2175,+ 1.5867+ ],+ [+ 43.0,+ 1.7321+ ],+ [+ 42.7654,+ 1.8478+ ],+ [+ 42.5176,+ 1.9319+ ],+ [+ 42.2611,+ 1.9829+ ],+ [+ 42.0,+ 2.0+ ],+ [+ 41.7389,+ 1.9829+ ],+ [+ 41.4824,+ 1.9319+ ],+ [+ 41.2346,+ 1.8478+ ],+ [+ 41.0,+ 1.7321+ ],+ [+ 40.7825,+ 1.5867+ ],+ [+ 40.5858,+ 1.4142+ ],+ [+ 40.4133,+ 1.2175+ ],+ [+ 40.2679,+ 1.0+ ],+ [+ 40.1522,+ 0.7654+ ],+ [+ 40.0681,+ 0.5176+ ],+ [+ 40.0171,+ 0.2611+ ],+ [+ 40.0,+ 0.0+ ],+ [+ 40.0171,+ -0.2611+ ],+ [+ 40.0681,+ -0.5176+ ],+ [+ 40.1522,+ -0.7654+ ],+ [+ 40.2679,+ -1.0+ ],+ [+ 40.4133,+ -1.2175+ ],+ [+ 40.5858,+ -1.4142+ ],+ [+ 40.7825,+ -1.5867+ ],+ [+ 41.0,+ -1.7321+ ],+ [+ 41.2346,+ -1.8478+ ],+ [+ 41.4824,+ -1.9319+ ],+ [+ 41.7389,+ -1.9829+ ],+ [+ 42.0,+ -2.0+ ],+ [+ 42.2611,+ -1.9829+ ],+ [+ 42.5176,+ -1.9319+ ],+ [+ 42.7654,+ -1.8478+ ],+ [+ 43.0,+ -1.7321+ ],+ [+ 43.2175,+ -1.5867+ ],+ [+ 43.4142,+ -1.4142+ ],+ [+ 43.5867,+ -1.2175+ ],+ [+ 43.7321,+ -1.0+ ],+ [+ 43.8478,+ -0.7654+ ],+ [+ 43.9319,+ -0.5176+ ],+ [+ 43.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 0.0+ ],+ [+ 49.9829,+ 0.2611+ ],+ [+ 49.9319,+ 0.5176+ ],+ [+ 49.8478,+ 0.7654+ ],+ [+ 49.7321,+ 1.0+ ],+ [+ 49.5867,+ 1.2175+ ],+ [+ 49.4142,+ 1.4142+ ],+ [+ 49.2175,+ 1.5867+ ],+ [+ 49.0,+ 1.7321+ ],+ [+ 48.7654,+ 1.8478+ ],+ [+ 48.5176,+ 1.9319+ ],+ [+ 48.2611,+ 1.9829+ ],+ [+ 48.0,+ 2.0+ ],+ [+ 47.7389,+ 1.9829+ ],+ [+ 47.4824,+ 1.9319+ ],+ [+ 47.2346,+ 1.8478+ ],+ [+ 47.0,+ 1.7321+ ],+ [+ 46.7825,+ 1.5867+ ],+ [+ 46.5858,+ 1.4142+ ],+ [+ 46.4133,+ 1.2175+ ],+ [+ 46.2679,+ 1.0+ ],+ [+ 46.1522,+ 0.7654+ ],+ [+ 46.0681,+ 0.5176+ ],+ [+ 46.0171,+ 0.2611+ ],+ [+ 46.0,+ 0.0+ ],+ [+ 46.0171,+ -0.2611+ ],+ [+ 46.0681,+ -0.5176+ ],+ [+ 46.1522,+ -0.7654+ ],+ [+ 46.2679,+ -1.0+ ],+ [+ 46.4133,+ -1.2175+ ],+ [+ 46.5858,+ -1.4142+ ],+ [+ 46.7825,+ -1.5867+ ],+ [+ 47.0,+ -1.7321+ ],+ [+ 47.2346,+ -1.8478+ ],+ [+ 47.4824,+ -1.9319+ ],+ [+ 47.7389,+ -1.9829+ ],+ [+ 48.0,+ -2.0+ ],+ [+ 48.2611,+ -1.9829+ ],+ [+ 48.5176,+ -1.9319+ ],+ [+ 48.7654,+ -1.8478+ ],+ [+ 49.0,+ -1.7321+ ],+ [+ 49.2175,+ -1.5867+ ],+ [+ 49.4142,+ -1.4142+ ],+ [+ 49.5867,+ -1.2175+ ],+ [+ 49.7321,+ -1.0+ ],+ [+ 49.8478,+ -0.7654+ ],+ [+ 49.9319,+ -0.5176+ ],+ [+ 49.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 0.0+ ],+ [+ 55.9829,+ 0.2611+ ],+ [+ 55.9319,+ 0.5176+ ],+ [+ 55.8478,+ 0.7654+ ],+ [+ 55.7321,+ 1.0+ ],+ [+ 55.5867,+ 1.2175+ ],+ [+ 55.4142,+ 1.4142+ ],+ [+ 55.2175,+ 1.5867+ ],+ [+ 55.0,+ 1.7321+ ],+ [+ 54.7654,+ 1.8478+ ],+ [+ 54.5176,+ 1.9319+ ],+ [+ 54.2611,+ 1.9829+ ],+ [+ 54.0,+ 2.0+ ],+ [+ 53.7389,+ 1.9829+ ],+ [+ 53.4824,+ 1.9319+ ],+ [+ 53.2346,+ 1.8478+ ],+ [+ 53.0,+ 1.7321+ ],+ [+ 52.7825,+ 1.5867+ ],+ [+ 52.5858,+ 1.4142+ ],+ [+ 52.4133,+ 1.2175+ ],+ [+ 52.2679,+ 1.0+ ],+ [+ 52.1522,+ 0.7654+ ],+ [+ 52.0681,+ 0.5176+ ],+ [+ 52.0171,+ 0.2611+ ],+ [+ 52.0,+ 0.0+ ],+ [+ 52.0171,+ -0.2611+ ],+ [+ 52.0681,+ -0.5176+ ],+ [+ 52.1522,+ -0.7654+ ],+ [+ 52.2679,+ -1.0+ ],+ [+ 52.4133,+ -1.2175+ ],+ [+ 52.5858,+ -1.4142+ ],+ [+ 52.7825,+ -1.5867+ ],+ [+ 53.0,+ -1.7321+ ],+ [+ 53.2346,+ -1.8478+ ],+ [+ 53.4824,+ -1.9319+ ],+ [+ 53.7389,+ -1.9829+ ],+ [+ 54.0,+ -2.0+ ],+ [+ 54.2611,+ -1.9829+ ],+ [+ 54.5176,+ -1.9319+ ],+ [+ 54.7654,+ -1.8478+ ],+ [+ 55.0,+ -1.7321+ ],+ [+ 55.2175,+ -1.5867+ ],+ [+ 55.4142,+ -1.4142+ ],+ [+ 55.5867,+ -1.2175+ ],+ [+ 55.7321,+ -1.0+ ],+ [+ 55.8478,+ -0.7654+ ],+ [+ 55.9319,+ -0.5176+ ],+ [+ 55.9829,+ -0.2611+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 6.0+ ],+ [+ 1.9829,+ 6.2611+ ],+ [+ 1.9319,+ 6.5176+ ],+ [+ 1.8478,+ 6.7654+ ],+ [+ 1.7321,+ 7.0+ ],+ [+ 1.5867,+ 7.2175+ ],+ [+ 1.4142,+ 7.4142+ ],+ [+ 1.2175,+ 7.5867+ ],+ [+ 1.0,+ 7.7321+ ],+ [+ 0.7654,+ 7.8478+ ],+ [+ 0.5176,+ 7.9319+ ],+ [+ 0.2611,+ 7.9829+ ],+ [+ 0.0,+ 8.0+ ],+ [+ -0.2611,+ 7.9829+ ],+ [+ -0.5176,+ 7.9319+ ],+ [+ -0.7654,+ 7.8478+ ],+ [+ -1.0,+ 7.7321+ ],+ [+ -1.2175,+ 7.5867+ ],+ [+ -1.4142,+ 7.4142+ ],+ [+ -1.5867,+ 7.2175+ ],+ [+ -1.7321,+ 7.0+ ],+ [+ -1.8478,+ 6.7654+ ],+ [+ -1.9319,+ 6.5176+ ],+ [+ -1.9829,+ 6.2611+ ],+ [+ -2.0,+ 6.0+ ],+ [+ -1.9829,+ 5.7389+ ],+ [+ -1.9319,+ 5.4824+ ],+ [+ -1.8478,+ 5.2346+ ],+ [+ -1.7321,+ 5.0+ ],+ [+ -1.5867,+ 4.7825+ ],+ [+ -1.4142,+ 4.5858+ ],+ [+ -1.2175,+ 4.4133+ ],+ [+ -1.0,+ 4.2679+ ],+ [+ -0.7654,+ 4.1522+ ],+ [+ -0.5176,+ 4.0681+ ],+ [+ -0.2611,+ 4.0171+ ],+ [+ -0.0,+ 4.0+ ],+ [+ 0.2611,+ 4.0171+ ],+ [+ 0.5176,+ 4.0681+ ],+ [+ 0.7654,+ 4.1522+ ],+ [+ 1.0,+ 4.2679+ ],+ [+ 1.2175,+ 4.4133+ ],+ [+ 1.4142,+ 4.5858+ ],+ [+ 1.5867,+ 4.7825+ ],+ [+ 1.7321,+ 5.0+ ],+ [+ 1.8478,+ 5.2346+ ],+ [+ 1.9319,+ 5.4824+ ],+ [+ 1.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 6.0+ ],+ [+ 7.9829,+ 6.2611+ ],+ [+ 7.9319,+ 6.5176+ ],+ [+ 7.8478,+ 6.7654+ ],+ [+ 7.7321,+ 7.0+ ],+ [+ 7.5867,+ 7.2175+ ],+ [+ 7.4142,+ 7.4142+ ],+ [+ 7.2175,+ 7.5867+ ],+ [+ 7.0,+ 7.7321+ ],+ [+ 6.7654,+ 7.8478+ ],+ [+ 6.5176,+ 7.9319+ ],+ [+ 6.2611,+ 7.9829+ ],+ [+ 6.0,+ 8.0+ ],+ [+ 5.7389,+ 7.9829+ ],+ [+ 5.4824,+ 7.9319+ ],+ [+ 5.2346,+ 7.8478+ ],+ [+ 5.0,+ 7.7321+ ],+ [+ 4.7825,+ 7.5867+ ],+ [+ 4.5858,+ 7.4142+ ],+ [+ 4.4133,+ 7.2175+ ],+ [+ 4.2679,+ 7.0+ ],+ [+ 4.1522,+ 6.7654+ ],+ [+ 4.0681,+ 6.5176+ ],+ [+ 4.0171,+ 6.2611+ ],+ [+ 4.0,+ 6.0+ ],+ [+ 4.0171,+ 5.7389+ ],+ [+ 4.0681,+ 5.4824+ ],+ [+ 4.1522,+ 5.2346+ ],+ [+ 4.2679,+ 5.0+ ],+ [+ 4.4133,+ 4.7825+ ],+ [+ 4.5858,+ 4.5858+ ],+ [+ 4.7825,+ 4.4133+ ],+ [+ 5.0,+ 4.2679+ ],+ [+ 5.2346,+ 4.1522+ ],+ [+ 5.4824,+ 4.0681+ ],+ [+ 5.7389,+ 4.0171+ ],+ [+ 6.0,+ 4.0+ ],+ [+ 6.2611,+ 4.0171+ ],+ [+ 6.5176,+ 4.0681+ ],+ [+ 6.7654,+ 4.1522+ ],+ [+ 7.0,+ 4.2679+ ],+ [+ 7.2175,+ 4.4133+ ],+ [+ 7.4142,+ 4.5858+ ],+ [+ 7.5867,+ 4.7825+ ],+ [+ 7.7321,+ 5.0+ ],+ [+ 7.8478,+ 5.2346+ ],+ [+ 7.9319,+ 5.4824+ ],+ [+ 7.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 6.0+ ],+ [+ 13.9829,+ 6.2611+ ],+ [+ 13.9319,+ 6.5176+ ],+ [+ 13.8478,+ 6.7654+ ],+ [+ 13.7321,+ 7.0+ ],+ [+ 13.5867,+ 7.2175+ ],+ [+ 13.4142,+ 7.4142+ ],+ [+ 13.2175,+ 7.5867+ ],+ [+ 13.0,+ 7.7321+ ],+ [+ 12.7654,+ 7.8478+ ],+ [+ 12.5176,+ 7.9319+ ],+ [+ 12.2611,+ 7.9829+ ],+ [+ 12.0,+ 8.0+ ],+ [+ 11.7389,+ 7.9829+ ],+ [+ 11.4824,+ 7.9319+ ],+ [+ 11.2346,+ 7.8478+ ],+ [+ 11.0,+ 7.7321+ ],+ [+ 10.7825,+ 7.5867+ ],+ [+ 10.5858,+ 7.4142+ ],+ [+ 10.4133,+ 7.2175+ ],+ [+ 10.2679,+ 7.0+ ],+ [+ 10.1522,+ 6.7654+ ],+ [+ 10.0681,+ 6.5176+ ],+ [+ 10.0171,+ 6.2611+ ],+ [+ 10.0,+ 6.0+ ],+ [+ 10.0171,+ 5.7389+ ],+ [+ 10.0681,+ 5.4824+ ],+ [+ 10.1522,+ 5.2346+ ],+ [+ 10.2679,+ 5.0+ ],+ [+ 10.4133,+ 4.7825+ ],+ [+ 10.5858,+ 4.5858+ ],+ [+ 10.7825,+ 4.4133+ ],+ [+ 11.0,+ 4.2679+ ],+ [+ 11.2346,+ 4.1522+ ],+ [+ 11.4824,+ 4.0681+ ],+ [+ 11.7389,+ 4.0171+ ],+ [+ 12.0,+ 4.0+ ],+ [+ 12.2611,+ 4.0171+ ],+ [+ 12.5176,+ 4.0681+ ],+ [+ 12.7654,+ 4.1522+ ],+ [+ 13.0,+ 4.2679+ ],+ [+ 13.2175,+ 4.4133+ ],+ [+ 13.4142,+ 4.5858+ ],+ [+ 13.5867,+ 4.7825+ ],+ [+ 13.7321,+ 5.0+ ],+ [+ 13.8478,+ 5.2346+ ],+ [+ 13.9319,+ 5.4824+ ],+ [+ 13.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 6.0+ ],+ [+ 19.9829,+ 6.2611+ ],+ [+ 19.9319,+ 6.5176+ ],+ [+ 19.8478,+ 6.7654+ ],+ [+ 19.7321,+ 7.0+ ],+ [+ 19.5867,+ 7.2175+ ],+ [+ 19.4142,+ 7.4142+ ],+ [+ 19.2175,+ 7.5867+ ],+ [+ 19.0,+ 7.7321+ ],+ [+ 18.7654,+ 7.8478+ ],+ [+ 18.5176,+ 7.9319+ ],+ [+ 18.2611,+ 7.9829+ ],+ [+ 18.0,+ 8.0+ ],+ [+ 17.7389,+ 7.9829+ ],+ [+ 17.4824,+ 7.9319+ ],+ [+ 17.2346,+ 7.8478+ ],+ [+ 17.0,+ 7.7321+ ],+ [+ 16.7825,+ 7.5867+ ],+ [+ 16.5858,+ 7.4142+ ],+ [+ 16.4133,+ 7.2175+ ],+ [+ 16.2679,+ 7.0+ ],+ [+ 16.1522,+ 6.7654+ ],+ [+ 16.0681,+ 6.5176+ ],+ [+ 16.0171,+ 6.2611+ ],+ [+ 16.0,+ 6.0+ ],+ [+ 16.0171,+ 5.7389+ ],+ [+ 16.0681,+ 5.4824+ ],+ [+ 16.1522,+ 5.2346+ ],+ [+ 16.2679,+ 5.0+ ],+ [+ 16.4133,+ 4.7825+ ],+ [+ 16.5858,+ 4.5858+ ],+ [+ 16.7825,+ 4.4133+ ],+ [+ 17.0,+ 4.2679+ ],+ [+ 17.2346,+ 4.1522+ ],+ [+ 17.4824,+ 4.0681+ ],+ [+ 17.7389,+ 4.0171+ ],+ [+ 18.0,+ 4.0+ ],+ [+ 18.2611,+ 4.0171+ ],+ [+ 18.5176,+ 4.0681+ ],+ [+ 18.7654,+ 4.1522+ ],+ [+ 19.0,+ 4.2679+ ],+ [+ 19.2175,+ 4.4133+ ],+ [+ 19.4142,+ 4.5858+ ],+ [+ 19.5867,+ 4.7825+ ],+ [+ 19.7321,+ 5.0+ ],+ [+ 19.8478,+ 5.2346+ ],+ [+ 19.9319,+ 5.4824+ ],+ [+ 19.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 6.0+ ],+ [+ 25.9829,+ 6.2611+ ],+ [+ 25.9319,+ 6.5176+ ],+ [+ 25.8478,+ 6.7654+ ],+ [+ 25.7321,+ 7.0+ ],+ [+ 25.5867,+ 7.2175+ ],+ [+ 25.4142,+ 7.4142+ ],+ [+ 25.2175,+ 7.5867+ ],+ [+ 25.0,+ 7.7321+ ],+ [+ 24.7654,+ 7.8478+ ],+ [+ 24.5176,+ 7.9319+ ],+ [+ 24.2611,+ 7.9829+ ],+ [+ 24.0,+ 8.0+ ],+ [+ 23.7389,+ 7.9829+ ],+ [+ 23.4824,+ 7.9319+ ],+ [+ 23.2346,+ 7.8478+ ],+ [+ 23.0,+ 7.7321+ ],+ [+ 22.7825,+ 7.5867+ ],+ [+ 22.5858,+ 7.4142+ ],+ [+ 22.4133,+ 7.2175+ ],+ [+ 22.2679,+ 7.0+ ],+ [+ 22.1522,+ 6.7654+ ],+ [+ 22.0681,+ 6.5176+ ],+ [+ 22.0171,+ 6.2611+ ],+ [+ 22.0,+ 6.0+ ],+ [+ 22.0171,+ 5.7389+ ],+ [+ 22.0681,+ 5.4824+ ],+ [+ 22.1522,+ 5.2346+ ],+ [+ 22.2679,+ 5.0+ ],+ [+ 22.4133,+ 4.7825+ ],+ [+ 22.5858,+ 4.5858+ ],+ [+ 22.7825,+ 4.4133+ ],+ [+ 23.0,+ 4.2679+ ],+ [+ 23.2346,+ 4.1522+ ],+ [+ 23.4824,+ 4.0681+ ],+ [+ 23.7389,+ 4.0171+ ],+ [+ 24.0,+ 4.0+ ],+ [+ 24.2611,+ 4.0171+ ],+ [+ 24.5176,+ 4.0681+ ],+ [+ 24.7654,+ 4.1522+ ],+ [+ 25.0,+ 4.2679+ ],+ [+ 25.2175,+ 4.4133+ ],+ [+ 25.4142,+ 4.5858+ ],+ [+ 25.5867,+ 4.7825+ ],+ [+ 25.7321,+ 5.0+ ],+ [+ 25.8478,+ 5.2346+ ],+ [+ 25.9319,+ 5.4824+ ],+ [+ 25.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 6.0+ ],+ [+ 31.9829,+ 6.2611+ ],+ [+ 31.9319,+ 6.5176+ ],+ [+ 31.8478,+ 6.7654+ ],+ [+ 31.7321,+ 7.0+ ],+ [+ 31.5867,+ 7.2175+ ],+ [+ 31.4142,+ 7.4142+ ],+ [+ 31.2175,+ 7.5867+ ],+ [+ 31.0,+ 7.7321+ ],+ [+ 30.7654,+ 7.8478+ ],+ [+ 30.5176,+ 7.9319+ ],+ [+ 30.2611,+ 7.9829+ ],+ [+ 30.0,+ 8.0+ ],+ [+ 29.7389,+ 7.9829+ ],+ [+ 29.4824,+ 7.9319+ ],+ [+ 29.2346,+ 7.8478+ ],+ [+ 29.0,+ 7.7321+ ],+ [+ 28.7825,+ 7.5867+ ],+ [+ 28.5858,+ 7.4142+ ],+ [+ 28.4133,+ 7.2175+ ],+ [+ 28.2679,+ 7.0+ ],+ [+ 28.1522,+ 6.7654+ ],+ [+ 28.0681,+ 6.5176+ ],+ [+ 28.0171,+ 6.2611+ ],+ [+ 28.0,+ 6.0+ ],+ [+ 28.0171,+ 5.7389+ ],+ [+ 28.0681,+ 5.4824+ ],+ [+ 28.1522,+ 5.2346+ ],+ [+ 28.2679,+ 5.0+ ],+ [+ 28.4133,+ 4.7825+ ],+ [+ 28.5858,+ 4.5858+ ],+ [+ 28.7825,+ 4.4133+ ],+ [+ 29.0,+ 4.2679+ ],+ [+ 29.2346,+ 4.1522+ ],+ [+ 29.4824,+ 4.0681+ ],+ [+ 29.7389,+ 4.0171+ ],+ [+ 30.0,+ 4.0+ ],+ [+ 30.2611,+ 4.0171+ ],+ [+ 30.5176,+ 4.0681+ ],+ [+ 30.7654,+ 4.1522+ ],+ [+ 31.0,+ 4.2679+ ],+ [+ 31.2175,+ 4.4133+ ],+ [+ 31.4142,+ 4.5858+ ],+ [+ 31.5867,+ 4.7825+ ],+ [+ 31.7321,+ 5.0+ ],+ [+ 31.8478,+ 5.2346+ ],+ [+ 31.9319,+ 5.4824+ ],+ [+ 31.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 6.0+ ],+ [+ 37.9829,+ 6.2611+ ],+ [+ 37.9319,+ 6.5176+ ],+ [+ 37.8478,+ 6.7654+ ],+ [+ 37.7321,+ 7.0+ ],+ [+ 37.5867,+ 7.2175+ ],+ [+ 37.4142,+ 7.4142+ ],+ [+ 37.2175,+ 7.5867+ ],+ [+ 37.0,+ 7.7321+ ],+ [+ 36.7654,+ 7.8478+ ],+ [+ 36.5176,+ 7.9319+ ],+ [+ 36.2611,+ 7.9829+ ],+ [+ 36.0,+ 8.0+ ],+ [+ 35.7389,+ 7.9829+ ],+ [+ 35.4824,+ 7.9319+ ],+ [+ 35.2346,+ 7.8478+ ],+ [+ 35.0,+ 7.7321+ ],+ [+ 34.7825,+ 7.5867+ ],+ [+ 34.5858,+ 7.4142+ ],+ [+ 34.4133,+ 7.2175+ ],+ [+ 34.2679,+ 7.0+ ],+ [+ 34.1522,+ 6.7654+ ],+ [+ 34.0681,+ 6.5176+ ],+ [+ 34.0171,+ 6.2611+ ],+ [+ 34.0,+ 6.0+ ],+ [+ 34.0171,+ 5.7389+ ],+ [+ 34.0681,+ 5.4824+ ],+ [+ 34.1522,+ 5.2346+ ],+ [+ 34.2679,+ 5.0+ ],+ [+ 34.4133,+ 4.7825+ ],+ [+ 34.5858,+ 4.5858+ ],+ [+ 34.7825,+ 4.4133+ ],+ [+ 35.0,+ 4.2679+ ],+ [+ 35.2346,+ 4.1522+ ],+ [+ 35.4824,+ 4.0681+ ],+ [+ 35.7389,+ 4.0171+ ],+ [+ 36.0,+ 4.0+ ],+ [+ 36.2611,+ 4.0171+ ],+ [+ 36.5176,+ 4.0681+ ],+ [+ 36.7654,+ 4.1522+ ],+ [+ 37.0,+ 4.2679+ ],+ [+ 37.2175,+ 4.4133+ ],+ [+ 37.4142,+ 4.5858+ ],+ [+ 37.5867,+ 4.7825+ ],+ [+ 37.7321,+ 5.0+ ],+ [+ 37.8478,+ 5.2346+ ],+ [+ 37.9319,+ 5.4824+ ],+ [+ 37.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 6.0+ ],+ [+ 43.9829,+ 6.2611+ ],+ [+ 43.9319,+ 6.5176+ ],+ [+ 43.8478,+ 6.7654+ ],+ [+ 43.7321,+ 7.0+ ],+ [+ 43.5867,+ 7.2175+ ],+ [+ 43.4142,+ 7.4142+ ],+ [+ 43.2175,+ 7.5867+ ],+ [+ 43.0,+ 7.7321+ ],+ [+ 42.7654,+ 7.8478+ ],+ [+ 42.5176,+ 7.9319+ ],+ [+ 42.2611,+ 7.9829+ ],+ [+ 42.0,+ 8.0+ ],+ [+ 41.7389,+ 7.9829+ ],+ [+ 41.4824,+ 7.9319+ ],+ [+ 41.2346,+ 7.8478+ ],+ [+ 41.0,+ 7.7321+ ],+ [+ 40.7825,+ 7.5867+ ],+ [+ 40.5858,+ 7.4142+ ],+ [+ 40.4133,+ 7.2175+ ],+ [+ 40.2679,+ 7.0+ ],+ [+ 40.1522,+ 6.7654+ ],+ [+ 40.0681,+ 6.5176+ ],+ [+ 40.0171,+ 6.2611+ ],+ [+ 40.0,+ 6.0+ ],+ [+ 40.0171,+ 5.7389+ ],+ [+ 40.0681,+ 5.4824+ ],+ [+ 40.1522,+ 5.2346+ ],+ [+ 40.2679,+ 5.0+ ],+ [+ 40.4133,+ 4.7825+ ],+ [+ 40.5858,+ 4.5858+ ],+ [+ 40.7825,+ 4.4133+ ],+ [+ 41.0,+ 4.2679+ ],+ [+ 41.2346,+ 4.1522+ ],+ [+ 41.4824,+ 4.0681+ ],+ [+ 41.7389,+ 4.0171+ ],+ [+ 42.0,+ 4.0+ ],+ [+ 42.2611,+ 4.0171+ ],+ [+ 42.5176,+ 4.0681+ ],+ [+ 42.7654,+ 4.1522+ ],+ [+ 43.0,+ 4.2679+ ],+ [+ 43.2175,+ 4.4133+ ],+ [+ 43.4142,+ 4.5858+ ],+ [+ 43.5867,+ 4.7825+ ],+ [+ 43.7321,+ 5.0+ ],+ [+ 43.8478,+ 5.2346+ ],+ [+ 43.9319,+ 5.4824+ ],+ [+ 43.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 6.0+ ],+ [+ 49.9829,+ 6.2611+ ],+ [+ 49.9319,+ 6.5176+ ],+ [+ 49.8478,+ 6.7654+ ],+ [+ 49.7321,+ 7.0+ ],+ [+ 49.5867,+ 7.2175+ ],+ [+ 49.4142,+ 7.4142+ ],+ [+ 49.2175,+ 7.5867+ ],+ [+ 49.0,+ 7.7321+ ],+ [+ 48.7654,+ 7.8478+ ],+ [+ 48.5176,+ 7.9319+ ],+ [+ 48.2611,+ 7.9829+ ],+ [+ 48.0,+ 8.0+ ],+ [+ 47.7389,+ 7.9829+ ],+ [+ 47.4824,+ 7.9319+ ],+ [+ 47.2346,+ 7.8478+ ],+ [+ 47.0,+ 7.7321+ ],+ [+ 46.7825,+ 7.5867+ ],+ [+ 46.5858,+ 7.4142+ ],+ [+ 46.4133,+ 7.2175+ ],+ [+ 46.2679,+ 7.0+ ],+ [+ 46.1522,+ 6.7654+ ],+ [+ 46.0681,+ 6.5176+ ],+ [+ 46.0171,+ 6.2611+ ],+ [+ 46.0,+ 6.0+ ],+ [+ 46.0171,+ 5.7389+ ],+ [+ 46.0681,+ 5.4824+ ],+ [+ 46.1522,+ 5.2346+ ],+ [+ 46.2679,+ 5.0+ ],+ [+ 46.4133,+ 4.7825+ ],+ [+ 46.5858,+ 4.5858+ ],+ [+ 46.7825,+ 4.4133+ ],+ [+ 47.0,+ 4.2679+ ],+ [+ 47.2346,+ 4.1522+ ],+ [+ 47.4824,+ 4.0681+ ],+ [+ 47.7389,+ 4.0171+ ],+ [+ 48.0,+ 4.0+ ],+ [+ 48.2611,+ 4.0171+ ],+ [+ 48.5176,+ 4.0681+ ],+ [+ 48.7654,+ 4.1522+ ],+ [+ 49.0,+ 4.2679+ ],+ [+ 49.2175,+ 4.4133+ ],+ [+ 49.4142,+ 4.5858+ ],+ [+ 49.5867,+ 4.7825+ ],+ [+ 49.7321,+ 5.0+ ],+ [+ 49.8478,+ 5.2346+ ],+ [+ 49.9319,+ 5.4824+ ],+ [+ 49.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 6.0+ ],+ [+ 55.9829,+ 6.2611+ ],+ [+ 55.9319,+ 6.5176+ ],+ [+ 55.8478,+ 6.7654+ ],+ [+ 55.7321,+ 7.0+ ],+ [+ 55.5867,+ 7.2175+ ],+ [+ 55.4142,+ 7.4142+ ],+ [+ 55.2175,+ 7.5867+ ],+ [+ 55.0,+ 7.7321+ ],+ [+ 54.7654,+ 7.8478+ ],+ [+ 54.5176,+ 7.9319+ ],+ [+ 54.2611,+ 7.9829+ ],+ [+ 54.0,+ 8.0+ ],+ [+ 53.7389,+ 7.9829+ ],+ [+ 53.4824,+ 7.9319+ ],+ [+ 53.2346,+ 7.8478+ ],+ [+ 53.0,+ 7.7321+ ],+ [+ 52.7825,+ 7.5867+ ],+ [+ 52.5858,+ 7.4142+ ],+ [+ 52.4133,+ 7.2175+ ],+ [+ 52.2679,+ 7.0+ ],+ [+ 52.1522,+ 6.7654+ ],+ [+ 52.0681,+ 6.5176+ ],+ [+ 52.0171,+ 6.2611+ ],+ [+ 52.0,+ 6.0+ ],+ [+ 52.0171,+ 5.7389+ ],+ [+ 52.0681,+ 5.4824+ ],+ [+ 52.1522,+ 5.2346+ ],+ [+ 52.2679,+ 5.0+ ],+ [+ 52.4133,+ 4.7825+ ],+ [+ 52.5858,+ 4.5858+ ],+ [+ 52.7825,+ 4.4133+ ],+ [+ 53.0,+ 4.2679+ ],+ [+ 53.2346,+ 4.1522+ ],+ [+ 53.4824,+ 4.0681+ ],+ [+ 53.7389,+ 4.0171+ ],+ [+ 54.0,+ 4.0+ ],+ [+ 54.2611,+ 4.0171+ ],+ [+ 54.5176,+ 4.0681+ ],+ [+ 54.7654,+ 4.1522+ ],+ [+ 55.0,+ 4.2679+ ],+ [+ 55.2175,+ 4.4133+ ],+ [+ 55.4142,+ 4.5858+ ],+ [+ 55.5867,+ 4.7825+ ],+ [+ 55.7321,+ 5.0+ ],+ [+ 55.8478,+ 5.2346+ ],+ [+ 55.9319,+ 5.4824+ ],+ [+ 55.9829,+ 5.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 12.0+ ],+ [+ 1.9829,+ 12.2611+ ],+ [+ 1.9319,+ 12.5176+ ],+ [+ 1.8478,+ 12.7654+ ],+ [+ 1.7321,+ 13.0+ ],+ [+ 1.5867,+ 13.2175+ ],+ [+ 1.4142,+ 13.4142+ ],+ [+ 1.2175,+ 13.5867+ ],+ [+ 1.0,+ 13.7321+ ],+ [+ 0.7654,+ 13.8478+ ],+ [+ 0.5176,+ 13.9319+ ],+ [+ 0.2611,+ 13.9829+ ],+ [+ 0.0,+ 14.0+ ],+ [+ -0.2611,+ 13.9829+ ],+ [+ -0.5176,+ 13.9319+ ],+ [+ -0.7654,+ 13.8478+ ],+ [+ -1.0,+ 13.7321+ ],+ [+ -1.2175,+ 13.5867+ ],+ [+ -1.4142,+ 13.4142+ ],+ [+ -1.5867,+ 13.2175+ ],+ [+ -1.7321,+ 13.0+ ],+ [+ -1.8478,+ 12.7654+ ],+ [+ -1.9319,+ 12.5176+ ],+ [+ -1.9829,+ 12.2611+ ],+ [+ -2.0,+ 12.0+ ],+ [+ -1.9829,+ 11.7389+ ],+ [+ -1.9319,+ 11.4824+ ],+ [+ -1.8478,+ 11.2346+ ],+ [+ -1.7321,+ 11.0+ ],+ [+ -1.5867,+ 10.7825+ ],+ [+ -1.4142,+ 10.5858+ ],+ [+ -1.2175,+ 10.4133+ ],+ [+ -1.0,+ 10.2679+ ],+ [+ -0.7654,+ 10.1522+ ],+ [+ -0.5176,+ 10.0681+ ],+ [+ -0.2611,+ 10.0171+ ],+ [+ -0.0,+ 10.0+ ],+ [+ 0.2611,+ 10.0171+ ],+ [+ 0.5176,+ 10.0681+ ],+ [+ 0.7654,+ 10.1522+ ],+ [+ 1.0,+ 10.2679+ ],+ [+ 1.2175,+ 10.4133+ ],+ [+ 1.4142,+ 10.5858+ ],+ [+ 1.5867,+ 10.7825+ ],+ [+ 1.7321,+ 11.0+ ],+ [+ 1.8478,+ 11.2346+ ],+ [+ 1.9319,+ 11.4824+ ],+ [+ 1.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 12.0+ ],+ [+ 7.9829,+ 12.2611+ ],+ [+ 7.9319,+ 12.5176+ ],+ [+ 7.8478,+ 12.7654+ ],+ [+ 7.7321,+ 13.0+ ],+ [+ 7.5867,+ 13.2175+ ],+ [+ 7.4142,+ 13.4142+ ],+ [+ 7.2175,+ 13.5867+ ],+ [+ 7.0,+ 13.7321+ ],+ [+ 6.7654,+ 13.8478+ ],+ [+ 6.5176,+ 13.9319+ ],+ [+ 6.2611,+ 13.9829+ ],+ [+ 6.0,+ 14.0+ ],+ [+ 5.7389,+ 13.9829+ ],+ [+ 5.4824,+ 13.9319+ ],+ [+ 5.2346,+ 13.8478+ ],+ [+ 5.0,+ 13.7321+ ],+ [+ 4.7825,+ 13.5867+ ],+ [+ 4.5858,+ 13.4142+ ],+ [+ 4.4133,+ 13.2175+ ],+ [+ 4.2679,+ 13.0+ ],+ [+ 4.1522,+ 12.7654+ ],+ [+ 4.0681,+ 12.5176+ ],+ [+ 4.0171,+ 12.2611+ ],+ [+ 4.0,+ 12.0+ ],+ [+ 4.0171,+ 11.7389+ ],+ [+ 4.0681,+ 11.4824+ ],+ [+ 4.1522,+ 11.2346+ ],+ [+ 4.2679,+ 11.0+ ],+ [+ 4.4133,+ 10.7825+ ],+ [+ 4.5858,+ 10.5858+ ],+ [+ 4.7825,+ 10.4133+ ],+ [+ 5.0,+ 10.2679+ ],+ [+ 5.2346,+ 10.1522+ ],+ [+ 5.4824,+ 10.0681+ ],+ [+ 5.7389,+ 10.0171+ ],+ [+ 6.0,+ 10.0+ ],+ [+ 6.2611,+ 10.0171+ ],+ [+ 6.5176,+ 10.0681+ ],+ [+ 6.7654,+ 10.1522+ ],+ [+ 7.0,+ 10.2679+ ],+ [+ 7.2175,+ 10.4133+ ],+ [+ 7.4142,+ 10.5858+ ],+ [+ 7.5867,+ 10.7825+ ],+ [+ 7.7321,+ 11.0+ ],+ [+ 7.8478,+ 11.2346+ ],+ [+ 7.9319,+ 11.4824+ ],+ [+ 7.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 12.0+ ],+ [+ 13.9829,+ 12.2611+ ],+ [+ 13.9319,+ 12.5176+ ],+ [+ 13.8478,+ 12.7654+ ],+ [+ 13.7321,+ 13.0+ ],+ [+ 13.5867,+ 13.2175+ ],+ [+ 13.4142,+ 13.4142+ ],+ [+ 13.2175,+ 13.5867+ ],+ [+ 13.0,+ 13.7321+ ],+ [+ 12.7654,+ 13.8478+ ],+ [+ 12.5176,+ 13.9319+ ],+ [+ 12.2611,+ 13.9829+ ],+ [+ 12.0,+ 14.0+ ],+ [+ 11.7389,+ 13.9829+ ],+ [+ 11.4824,+ 13.9319+ ],+ [+ 11.2346,+ 13.8478+ ],+ [+ 11.0,+ 13.7321+ ],+ [+ 10.7825,+ 13.5867+ ],+ [+ 10.5858,+ 13.4142+ ],+ [+ 10.4133,+ 13.2175+ ],+ [+ 10.2679,+ 13.0+ ],+ [+ 10.1522,+ 12.7654+ ],+ [+ 10.0681,+ 12.5176+ ],+ [+ 10.0171,+ 12.2611+ ],+ [+ 10.0,+ 12.0+ ],+ [+ 10.0171,+ 11.7389+ ],+ [+ 10.0681,+ 11.4824+ ],+ [+ 10.1522,+ 11.2346+ ],+ [+ 10.2679,+ 11.0+ ],+ [+ 10.4133,+ 10.7825+ ],+ [+ 10.5858,+ 10.5858+ ],+ [+ 10.7825,+ 10.4133+ ],+ [+ 11.0,+ 10.2679+ ],+ [+ 11.2346,+ 10.1522+ ],+ [+ 11.4824,+ 10.0681+ ],+ [+ 11.7389,+ 10.0171+ ],+ [+ 12.0,+ 10.0+ ],+ [+ 12.2611,+ 10.0171+ ],+ [+ 12.5176,+ 10.0681+ ],+ [+ 12.7654,+ 10.1522+ ],+ [+ 13.0,+ 10.2679+ ],+ [+ 13.2175,+ 10.4133+ ],+ [+ 13.4142,+ 10.5858+ ],+ [+ 13.5867,+ 10.7825+ ],+ [+ 13.7321,+ 11.0+ ],+ [+ 13.8478,+ 11.2346+ ],+ [+ 13.9319,+ 11.4824+ ],+ [+ 13.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 12.0+ ],+ [+ 19.9829,+ 12.2611+ ],+ [+ 19.9319,+ 12.5176+ ],+ [+ 19.8478,+ 12.7654+ ],+ [+ 19.7321,+ 13.0+ ],+ [+ 19.5867,+ 13.2175+ ],+ [+ 19.4142,+ 13.4142+ ],+ [+ 19.2175,+ 13.5867+ ],+ [+ 19.0,+ 13.7321+ ],+ [+ 18.7654,+ 13.8478+ ],+ [+ 18.5176,+ 13.9319+ ],+ [+ 18.2611,+ 13.9829+ ],+ [+ 18.0,+ 14.0+ ],+ [+ 17.7389,+ 13.9829+ ],+ [+ 17.4824,+ 13.9319+ ],+ [+ 17.2346,+ 13.8478+ ],+ [+ 17.0,+ 13.7321+ ],+ [+ 16.7825,+ 13.5867+ ],+ [+ 16.5858,+ 13.4142+ ],+ [+ 16.4133,+ 13.2175+ ],+ [+ 16.2679,+ 13.0+ ],+ [+ 16.1522,+ 12.7654+ ],+ [+ 16.0681,+ 12.5176+ ],+ [+ 16.0171,+ 12.2611+ ],+ [+ 16.0,+ 12.0+ ],+ [+ 16.0171,+ 11.7389+ ],+ [+ 16.0681,+ 11.4824+ ],+ [+ 16.1522,+ 11.2346+ ],+ [+ 16.2679,+ 11.0+ ],+ [+ 16.4133,+ 10.7825+ ],+ [+ 16.5858,+ 10.5858+ ],+ [+ 16.7825,+ 10.4133+ ],+ [+ 17.0,+ 10.2679+ ],+ [+ 17.2346,+ 10.1522+ ],+ [+ 17.4824,+ 10.0681+ ],+ [+ 17.7389,+ 10.0171+ ],+ [+ 18.0,+ 10.0+ ],+ [+ 18.2611,+ 10.0171+ ],+ [+ 18.5176,+ 10.0681+ ],+ [+ 18.7654,+ 10.1522+ ],+ [+ 19.0,+ 10.2679+ ],+ [+ 19.2175,+ 10.4133+ ],+ [+ 19.4142,+ 10.5858+ ],+ [+ 19.5867,+ 10.7825+ ],+ [+ 19.7321,+ 11.0+ ],+ [+ 19.8478,+ 11.2346+ ],+ [+ 19.9319,+ 11.4824+ ],+ [+ 19.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 12.0+ ],+ [+ 25.9829,+ 12.2611+ ],+ [+ 25.9319,+ 12.5176+ ],+ [+ 25.8478,+ 12.7654+ ],+ [+ 25.7321,+ 13.0+ ],+ [+ 25.5867,+ 13.2175+ ],+ [+ 25.4142,+ 13.4142+ ],+ [+ 25.2175,+ 13.5867+ ],+ [+ 25.0,+ 13.7321+ ],+ [+ 24.7654,+ 13.8478+ ],+ [+ 24.5176,+ 13.9319+ ],+ [+ 24.2611,+ 13.9829+ ],+ [+ 24.0,+ 14.0+ ],+ [+ 23.7389,+ 13.9829+ ],+ [+ 23.4824,+ 13.9319+ ],+ [+ 23.2346,+ 13.8478+ ],+ [+ 23.0,+ 13.7321+ ],+ [+ 22.7825,+ 13.5867+ ],+ [+ 22.5858,+ 13.4142+ ],+ [+ 22.4133,+ 13.2175+ ],+ [+ 22.2679,+ 13.0+ ],+ [+ 22.1522,+ 12.7654+ ],+ [+ 22.0681,+ 12.5176+ ],+ [+ 22.0171,+ 12.2611+ ],+ [+ 22.0,+ 12.0+ ],+ [+ 22.0171,+ 11.7389+ ],+ [+ 22.0681,+ 11.4824+ ],+ [+ 22.1522,+ 11.2346+ ],+ [+ 22.2679,+ 11.0+ ],+ [+ 22.4133,+ 10.7825+ ],+ [+ 22.5858,+ 10.5858+ ],+ [+ 22.7825,+ 10.4133+ ],+ [+ 23.0,+ 10.2679+ ],+ [+ 23.2346,+ 10.1522+ ],+ [+ 23.4824,+ 10.0681+ ],+ [+ 23.7389,+ 10.0171+ ],+ [+ 24.0,+ 10.0+ ],+ [+ 24.2611,+ 10.0171+ ],+ [+ 24.5176,+ 10.0681+ ],+ [+ 24.7654,+ 10.1522+ ],+ [+ 25.0,+ 10.2679+ ],+ [+ 25.2175,+ 10.4133+ ],+ [+ 25.4142,+ 10.5858+ ],+ [+ 25.5867,+ 10.7825+ ],+ [+ 25.7321,+ 11.0+ ],+ [+ 25.8478,+ 11.2346+ ],+ [+ 25.9319,+ 11.4824+ ],+ [+ 25.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 12.0+ ],+ [+ 31.9829,+ 12.2611+ ],+ [+ 31.9319,+ 12.5176+ ],+ [+ 31.8478,+ 12.7654+ ],+ [+ 31.7321,+ 13.0+ ],+ [+ 31.5867,+ 13.2175+ ],+ [+ 31.4142,+ 13.4142+ ],+ [+ 31.2175,+ 13.5867+ ],+ [+ 31.0,+ 13.7321+ ],+ [+ 30.7654,+ 13.8478+ ],+ [+ 30.5176,+ 13.9319+ ],+ [+ 30.2611,+ 13.9829+ ],+ [+ 30.0,+ 14.0+ ],+ [+ 29.7389,+ 13.9829+ ],+ [+ 29.4824,+ 13.9319+ ],+ [+ 29.2346,+ 13.8478+ ],+ [+ 29.0,+ 13.7321+ ],+ [+ 28.7825,+ 13.5867+ ],+ [+ 28.5858,+ 13.4142+ ],+ [+ 28.4133,+ 13.2175+ ],+ [+ 28.2679,+ 13.0+ ],+ [+ 28.1522,+ 12.7654+ ],+ [+ 28.0681,+ 12.5176+ ],+ [+ 28.0171,+ 12.2611+ ],+ [+ 28.0,+ 12.0+ ],+ [+ 28.0171,+ 11.7389+ ],+ [+ 28.0681,+ 11.4824+ ],+ [+ 28.1522,+ 11.2346+ ],+ [+ 28.2679,+ 11.0+ ],+ [+ 28.4133,+ 10.7825+ ],+ [+ 28.5858,+ 10.5858+ ],+ [+ 28.7825,+ 10.4133+ ],+ [+ 29.0,+ 10.2679+ ],+ [+ 29.2346,+ 10.1522+ ],+ [+ 29.4824,+ 10.0681+ ],+ [+ 29.7389,+ 10.0171+ ],+ [+ 30.0,+ 10.0+ ],+ [+ 30.2611,+ 10.0171+ ],+ [+ 30.5176,+ 10.0681+ ],+ [+ 30.7654,+ 10.1522+ ],+ [+ 31.0,+ 10.2679+ ],+ [+ 31.2175,+ 10.4133+ ],+ [+ 31.4142,+ 10.5858+ ],+ [+ 31.5867,+ 10.7825+ ],+ [+ 31.7321,+ 11.0+ ],+ [+ 31.8478,+ 11.2346+ ],+ [+ 31.9319,+ 11.4824+ ],+ [+ 31.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 12.0+ ],+ [+ 37.9829,+ 12.2611+ ],+ [+ 37.9319,+ 12.5176+ ],+ [+ 37.8478,+ 12.7654+ ],+ [+ 37.7321,+ 13.0+ ],+ [+ 37.5867,+ 13.2175+ ],+ [+ 37.4142,+ 13.4142+ ],+ [+ 37.2175,+ 13.5867+ ],+ [+ 37.0,+ 13.7321+ ],+ [+ 36.7654,+ 13.8478+ ],+ [+ 36.5176,+ 13.9319+ ],+ [+ 36.2611,+ 13.9829+ ],+ [+ 36.0,+ 14.0+ ],+ [+ 35.7389,+ 13.9829+ ],+ [+ 35.4824,+ 13.9319+ ],+ [+ 35.2346,+ 13.8478+ ],+ [+ 35.0,+ 13.7321+ ],+ [+ 34.7825,+ 13.5867+ ],+ [+ 34.5858,+ 13.4142+ ],+ [+ 34.4133,+ 13.2175+ ],+ [+ 34.2679,+ 13.0+ ],+ [+ 34.1522,+ 12.7654+ ],+ [+ 34.0681,+ 12.5176+ ],+ [+ 34.0171,+ 12.2611+ ],+ [+ 34.0,+ 12.0+ ],+ [+ 34.0171,+ 11.7389+ ],+ [+ 34.0681,+ 11.4824+ ],+ [+ 34.1522,+ 11.2346+ ],+ [+ 34.2679,+ 11.0+ ],+ [+ 34.4133,+ 10.7825+ ],+ [+ 34.5858,+ 10.5858+ ],+ [+ 34.7825,+ 10.4133+ ],+ [+ 35.0,+ 10.2679+ ],+ [+ 35.2346,+ 10.1522+ ],+ [+ 35.4824,+ 10.0681+ ],+ [+ 35.7389,+ 10.0171+ ],+ [+ 36.0,+ 10.0+ ],+ [+ 36.2611,+ 10.0171+ ],+ [+ 36.5176,+ 10.0681+ ],+ [+ 36.7654,+ 10.1522+ ],+ [+ 37.0,+ 10.2679+ ],+ [+ 37.2175,+ 10.4133+ ],+ [+ 37.4142,+ 10.5858+ ],+ [+ 37.5867,+ 10.7825+ ],+ [+ 37.7321,+ 11.0+ ],+ [+ 37.8478,+ 11.2346+ ],+ [+ 37.9319,+ 11.4824+ ],+ [+ 37.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 12.0+ ],+ [+ 43.9829,+ 12.2611+ ],+ [+ 43.9319,+ 12.5176+ ],+ [+ 43.8478,+ 12.7654+ ],+ [+ 43.7321,+ 13.0+ ],+ [+ 43.5867,+ 13.2175+ ],+ [+ 43.4142,+ 13.4142+ ],+ [+ 43.2175,+ 13.5867+ ],+ [+ 43.0,+ 13.7321+ ],+ [+ 42.7654,+ 13.8478+ ],+ [+ 42.5176,+ 13.9319+ ],+ [+ 42.2611,+ 13.9829+ ],+ [+ 42.0,+ 14.0+ ],+ [+ 41.7389,+ 13.9829+ ],+ [+ 41.4824,+ 13.9319+ ],+ [+ 41.2346,+ 13.8478+ ],+ [+ 41.0,+ 13.7321+ ],+ [+ 40.7825,+ 13.5867+ ],+ [+ 40.5858,+ 13.4142+ ],+ [+ 40.4133,+ 13.2175+ ],+ [+ 40.2679,+ 13.0+ ],+ [+ 40.1522,+ 12.7654+ ],+ [+ 40.0681,+ 12.5176+ ],+ [+ 40.0171,+ 12.2611+ ],+ [+ 40.0,+ 12.0+ ],+ [+ 40.0171,+ 11.7389+ ],+ [+ 40.0681,+ 11.4824+ ],+ [+ 40.1522,+ 11.2346+ ],+ [+ 40.2679,+ 11.0+ ],+ [+ 40.4133,+ 10.7825+ ],+ [+ 40.5858,+ 10.5858+ ],+ [+ 40.7825,+ 10.4133+ ],+ [+ 41.0,+ 10.2679+ ],+ [+ 41.2346,+ 10.1522+ ],+ [+ 41.4824,+ 10.0681+ ],+ [+ 41.7389,+ 10.0171+ ],+ [+ 42.0,+ 10.0+ ],+ [+ 42.2611,+ 10.0171+ ],+ [+ 42.5176,+ 10.0681+ ],+ [+ 42.7654,+ 10.1522+ ],+ [+ 43.0,+ 10.2679+ ],+ [+ 43.2175,+ 10.4133+ ],+ [+ 43.4142,+ 10.5858+ ],+ [+ 43.5867,+ 10.7825+ ],+ [+ 43.7321,+ 11.0+ ],+ [+ 43.8478,+ 11.2346+ ],+ [+ 43.9319,+ 11.4824+ ],+ [+ 43.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 12.0+ ],+ [+ 49.9829,+ 12.2611+ ],+ [+ 49.9319,+ 12.5176+ ],+ [+ 49.8478,+ 12.7654+ ],+ [+ 49.7321,+ 13.0+ ],+ [+ 49.5867,+ 13.2175+ ],+ [+ 49.4142,+ 13.4142+ ],+ [+ 49.2175,+ 13.5867+ ],+ [+ 49.0,+ 13.7321+ ],+ [+ 48.7654,+ 13.8478+ ],+ [+ 48.5176,+ 13.9319+ ],+ [+ 48.2611,+ 13.9829+ ],+ [+ 48.0,+ 14.0+ ],+ [+ 47.7389,+ 13.9829+ ],+ [+ 47.4824,+ 13.9319+ ],+ [+ 47.2346,+ 13.8478+ ],+ [+ 47.0,+ 13.7321+ ],+ [+ 46.7825,+ 13.5867+ ],+ [+ 46.5858,+ 13.4142+ ],+ [+ 46.4133,+ 13.2175+ ],+ [+ 46.2679,+ 13.0+ ],+ [+ 46.1522,+ 12.7654+ ],+ [+ 46.0681,+ 12.5176+ ],+ [+ 46.0171,+ 12.2611+ ],+ [+ 46.0,+ 12.0+ ],+ [+ 46.0171,+ 11.7389+ ],+ [+ 46.0681,+ 11.4824+ ],+ [+ 46.1522,+ 11.2346+ ],+ [+ 46.2679,+ 11.0+ ],+ [+ 46.4133,+ 10.7825+ ],+ [+ 46.5858,+ 10.5858+ ],+ [+ 46.7825,+ 10.4133+ ],+ [+ 47.0,+ 10.2679+ ],+ [+ 47.2346,+ 10.1522+ ],+ [+ 47.4824,+ 10.0681+ ],+ [+ 47.7389,+ 10.0171+ ],+ [+ 48.0,+ 10.0+ ],+ [+ 48.2611,+ 10.0171+ ],+ [+ 48.5176,+ 10.0681+ ],+ [+ 48.7654,+ 10.1522+ ],+ [+ 49.0,+ 10.2679+ ],+ [+ 49.2175,+ 10.4133+ ],+ [+ 49.4142,+ 10.5858+ ],+ [+ 49.5867,+ 10.7825+ ],+ [+ 49.7321,+ 11.0+ ],+ [+ 49.8478,+ 11.2346+ ],+ [+ 49.9319,+ 11.4824+ ],+ [+ 49.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 12.0+ ],+ [+ 55.9829,+ 12.2611+ ],+ [+ 55.9319,+ 12.5176+ ],+ [+ 55.8478,+ 12.7654+ ],+ [+ 55.7321,+ 13.0+ ],+ [+ 55.5867,+ 13.2175+ ],+ [+ 55.4142,+ 13.4142+ ],+ [+ 55.2175,+ 13.5867+ ],+ [+ 55.0,+ 13.7321+ ],+ [+ 54.7654,+ 13.8478+ ],+ [+ 54.5176,+ 13.9319+ ],+ [+ 54.2611,+ 13.9829+ ],+ [+ 54.0,+ 14.0+ ],+ [+ 53.7389,+ 13.9829+ ],+ [+ 53.4824,+ 13.9319+ ],+ [+ 53.2346,+ 13.8478+ ],+ [+ 53.0,+ 13.7321+ ],+ [+ 52.7825,+ 13.5867+ ],+ [+ 52.5858,+ 13.4142+ ],+ [+ 52.4133,+ 13.2175+ ],+ [+ 52.2679,+ 13.0+ ],+ [+ 52.1522,+ 12.7654+ ],+ [+ 52.0681,+ 12.5176+ ],+ [+ 52.0171,+ 12.2611+ ],+ [+ 52.0,+ 12.0+ ],+ [+ 52.0171,+ 11.7389+ ],+ [+ 52.0681,+ 11.4824+ ],+ [+ 52.1522,+ 11.2346+ ],+ [+ 52.2679,+ 11.0+ ],+ [+ 52.4133,+ 10.7825+ ],+ [+ 52.5858,+ 10.5858+ ],+ [+ 52.7825,+ 10.4133+ ],+ [+ 53.0,+ 10.2679+ ],+ [+ 53.2346,+ 10.1522+ ],+ [+ 53.4824,+ 10.0681+ ],+ [+ 53.7389,+ 10.0171+ ],+ [+ 54.0,+ 10.0+ ],+ [+ 54.2611,+ 10.0171+ ],+ [+ 54.5176,+ 10.0681+ ],+ [+ 54.7654,+ 10.1522+ ],+ [+ 55.0,+ 10.2679+ ],+ [+ 55.2175,+ 10.4133+ ],+ [+ 55.4142,+ 10.5858+ ],+ [+ 55.5867,+ 10.7825+ ],+ [+ 55.7321,+ 11.0+ ],+ [+ 55.8478,+ 11.2346+ ],+ [+ 55.9319,+ 11.4824+ ],+ [+ 55.9829,+ 11.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 18.0+ ],+ [+ 1.9829,+ 18.2611+ ],+ [+ 1.9319,+ 18.5176+ ],+ [+ 1.8478,+ 18.7654+ ],+ [+ 1.7321,+ 19.0+ ],+ [+ 1.5867,+ 19.2175+ ],+ [+ 1.4142,+ 19.4142+ ],+ [+ 1.2175,+ 19.5867+ ],+ [+ 1.0,+ 19.7321+ ],+ [+ 0.7654,+ 19.8478+ ],+ [+ 0.5176,+ 19.9319+ ],+ [+ 0.2611,+ 19.9829+ ],+ [+ 0.0,+ 20.0+ ],+ [+ -0.2611,+ 19.9829+ ],+ [+ -0.5176,+ 19.9319+ ],+ [+ -0.7654,+ 19.8478+ ],+ [+ -1.0,+ 19.7321+ ],+ [+ -1.2175,+ 19.5867+ ],+ [+ -1.4142,+ 19.4142+ ],+ [+ -1.5867,+ 19.2175+ ],+ [+ -1.7321,+ 19.0+ ],+ [+ -1.8478,+ 18.7654+ ],+ [+ -1.9319,+ 18.5176+ ],+ [+ -1.9829,+ 18.2611+ ],+ [+ -2.0,+ 18.0+ ],+ [+ -1.9829,+ 17.7389+ ],+ [+ -1.9319,+ 17.4824+ ],+ [+ -1.8478,+ 17.2346+ ],+ [+ -1.7321,+ 17.0+ ],+ [+ -1.5867,+ 16.7825+ ],+ [+ -1.4142,+ 16.5858+ ],+ [+ -1.2175,+ 16.4133+ ],+ [+ -1.0,+ 16.2679+ ],+ [+ -0.7654,+ 16.1522+ ],+ [+ -0.5176,+ 16.0681+ ],+ [+ -0.2611,+ 16.0171+ ],+ [+ -0.0,+ 16.0+ ],+ [+ 0.2611,+ 16.0171+ ],+ [+ 0.5176,+ 16.0681+ ],+ [+ 0.7654,+ 16.1522+ ],+ [+ 1.0,+ 16.2679+ ],+ [+ 1.2175,+ 16.4133+ ],+ [+ 1.4142,+ 16.5858+ ],+ [+ 1.5867,+ 16.7825+ ],+ [+ 1.7321,+ 17.0+ ],+ [+ 1.8478,+ 17.2346+ ],+ [+ 1.9319,+ 17.4824+ ],+ [+ 1.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 18.0+ ],+ [+ 7.9829,+ 18.2611+ ],+ [+ 7.9319,+ 18.5176+ ],+ [+ 7.8478,+ 18.7654+ ],+ [+ 7.7321,+ 19.0+ ],+ [+ 7.5867,+ 19.2175+ ],+ [+ 7.4142,+ 19.4142+ ],+ [+ 7.2175,+ 19.5867+ ],+ [+ 7.0,+ 19.7321+ ],+ [+ 6.7654,+ 19.8478+ ],+ [+ 6.5176,+ 19.9319+ ],+ [+ 6.2611,+ 19.9829+ ],+ [+ 6.0,+ 20.0+ ],+ [+ 5.7389,+ 19.9829+ ],+ [+ 5.4824,+ 19.9319+ ],+ [+ 5.2346,+ 19.8478+ ],+ [+ 5.0,+ 19.7321+ ],+ [+ 4.7825,+ 19.5867+ ],+ [+ 4.5858,+ 19.4142+ ],+ [+ 4.4133,+ 19.2175+ ],+ [+ 4.2679,+ 19.0+ ],+ [+ 4.1522,+ 18.7654+ ],+ [+ 4.0681,+ 18.5176+ ],+ [+ 4.0171,+ 18.2611+ ],+ [+ 4.0,+ 18.0+ ],+ [+ 4.0171,+ 17.7389+ ],+ [+ 4.0681,+ 17.4824+ ],+ [+ 4.1522,+ 17.2346+ ],+ [+ 4.2679,+ 17.0+ ],+ [+ 4.4133,+ 16.7825+ ],+ [+ 4.5858,+ 16.5858+ ],+ [+ 4.7825,+ 16.4133+ ],+ [+ 5.0,+ 16.2679+ ],+ [+ 5.2346,+ 16.1522+ ],+ [+ 5.4824,+ 16.0681+ ],+ [+ 5.7389,+ 16.0171+ ],+ [+ 6.0,+ 16.0+ ],+ [+ 6.2611,+ 16.0171+ ],+ [+ 6.5176,+ 16.0681+ ],+ [+ 6.7654,+ 16.1522+ ],+ [+ 7.0,+ 16.2679+ ],+ [+ 7.2175,+ 16.4133+ ],+ [+ 7.4142,+ 16.5858+ ],+ [+ 7.5867,+ 16.7825+ ],+ [+ 7.7321,+ 17.0+ ],+ [+ 7.8478,+ 17.2346+ ],+ [+ 7.9319,+ 17.4824+ ],+ [+ 7.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 18.0+ ],+ [+ 13.9829,+ 18.2611+ ],+ [+ 13.9319,+ 18.5176+ ],+ [+ 13.8478,+ 18.7654+ ],+ [+ 13.7321,+ 19.0+ ],+ [+ 13.5867,+ 19.2175+ ],+ [+ 13.4142,+ 19.4142+ ],+ [+ 13.2175,+ 19.5867+ ],+ [+ 13.0,+ 19.7321+ ],+ [+ 12.7654,+ 19.8478+ ],+ [+ 12.5176,+ 19.9319+ ],+ [+ 12.2611,+ 19.9829+ ],+ [+ 12.0,+ 20.0+ ],+ [+ 11.7389,+ 19.9829+ ],+ [+ 11.4824,+ 19.9319+ ],+ [+ 11.2346,+ 19.8478+ ],+ [+ 11.0,+ 19.7321+ ],+ [+ 10.7825,+ 19.5867+ ],+ [+ 10.5858,+ 19.4142+ ],+ [+ 10.4133,+ 19.2175+ ],+ [+ 10.2679,+ 19.0+ ],+ [+ 10.1522,+ 18.7654+ ],+ [+ 10.0681,+ 18.5176+ ],+ [+ 10.0171,+ 18.2611+ ],+ [+ 10.0,+ 18.0+ ],+ [+ 10.0171,+ 17.7389+ ],+ [+ 10.0681,+ 17.4824+ ],+ [+ 10.1522,+ 17.2346+ ],+ [+ 10.2679,+ 17.0+ ],+ [+ 10.4133,+ 16.7825+ ],+ [+ 10.5858,+ 16.5858+ ],+ [+ 10.7825,+ 16.4133+ ],+ [+ 11.0,+ 16.2679+ ],+ [+ 11.2346,+ 16.1522+ ],+ [+ 11.4824,+ 16.0681+ ],+ [+ 11.7389,+ 16.0171+ ],+ [+ 12.0,+ 16.0+ ],+ [+ 12.2611,+ 16.0171+ ],+ [+ 12.5176,+ 16.0681+ ],+ [+ 12.7654,+ 16.1522+ ],+ [+ 13.0,+ 16.2679+ ],+ [+ 13.2175,+ 16.4133+ ],+ [+ 13.4142,+ 16.5858+ ],+ [+ 13.5867,+ 16.7825+ ],+ [+ 13.7321,+ 17.0+ ],+ [+ 13.8478,+ 17.2346+ ],+ [+ 13.9319,+ 17.4824+ ],+ [+ 13.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 18.0+ ],+ [+ 19.9829,+ 18.2611+ ],+ [+ 19.9319,+ 18.5176+ ],+ [+ 19.8478,+ 18.7654+ ],+ [+ 19.7321,+ 19.0+ ],+ [+ 19.5867,+ 19.2175+ ],+ [+ 19.4142,+ 19.4142+ ],+ [+ 19.2175,+ 19.5867+ ],+ [+ 19.0,+ 19.7321+ ],+ [+ 18.7654,+ 19.8478+ ],+ [+ 18.5176,+ 19.9319+ ],+ [+ 18.2611,+ 19.9829+ ],+ [+ 18.0,+ 20.0+ ],+ [+ 17.7389,+ 19.9829+ ],+ [+ 17.4824,+ 19.9319+ ],+ [+ 17.2346,+ 19.8478+ ],+ [+ 17.0,+ 19.7321+ ],+ [+ 16.7825,+ 19.5867+ ],+ [+ 16.5858,+ 19.4142+ ],+ [+ 16.4133,+ 19.2175+ ],+ [+ 16.2679,+ 19.0+ ],+ [+ 16.1522,+ 18.7654+ ],+ [+ 16.0681,+ 18.5176+ ],+ [+ 16.0171,+ 18.2611+ ],+ [+ 16.0,+ 18.0+ ],+ [+ 16.0171,+ 17.7389+ ],+ [+ 16.0681,+ 17.4824+ ],+ [+ 16.1522,+ 17.2346+ ],+ [+ 16.2679,+ 17.0+ ],+ [+ 16.4133,+ 16.7825+ ],+ [+ 16.5858,+ 16.5858+ ],+ [+ 16.7825,+ 16.4133+ ],+ [+ 17.0,+ 16.2679+ ],+ [+ 17.2346,+ 16.1522+ ],+ [+ 17.4824,+ 16.0681+ ],+ [+ 17.7389,+ 16.0171+ ],+ [+ 18.0,+ 16.0+ ],+ [+ 18.2611,+ 16.0171+ ],+ [+ 18.5176,+ 16.0681+ ],+ [+ 18.7654,+ 16.1522+ ],+ [+ 19.0,+ 16.2679+ ],+ [+ 19.2175,+ 16.4133+ ],+ [+ 19.4142,+ 16.5858+ ],+ [+ 19.5867,+ 16.7825+ ],+ [+ 19.7321,+ 17.0+ ],+ [+ 19.8478,+ 17.2346+ ],+ [+ 19.9319,+ 17.4824+ ],+ [+ 19.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 18.0+ ],+ [+ 25.9829,+ 18.2611+ ],+ [+ 25.9319,+ 18.5176+ ],+ [+ 25.8478,+ 18.7654+ ],+ [+ 25.7321,+ 19.0+ ],+ [+ 25.5867,+ 19.2175+ ],+ [+ 25.4142,+ 19.4142+ ],+ [+ 25.2175,+ 19.5867+ ],+ [+ 25.0,+ 19.7321+ ],+ [+ 24.7654,+ 19.8478+ ],+ [+ 24.5176,+ 19.9319+ ],+ [+ 24.2611,+ 19.9829+ ],+ [+ 24.0,+ 20.0+ ],+ [+ 23.7389,+ 19.9829+ ],+ [+ 23.4824,+ 19.9319+ ],+ [+ 23.2346,+ 19.8478+ ],+ [+ 23.0,+ 19.7321+ ],+ [+ 22.7825,+ 19.5867+ ],+ [+ 22.5858,+ 19.4142+ ],+ [+ 22.4133,+ 19.2175+ ],+ [+ 22.2679,+ 19.0+ ],+ [+ 22.1522,+ 18.7654+ ],+ [+ 22.0681,+ 18.5176+ ],+ [+ 22.0171,+ 18.2611+ ],+ [+ 22.0,+ 18.0+ ],+ [+ 22.0171,+ 17.7389+ ],+ [+ 22.0681,+ 17.4824+ ],+ [+ 22.1522,+ 17.2346+ ],+ [+ 22.2679,+ 17.0+ ],+ [+ 22.4133,+ 16.7825+ ],+ [+ 22.5858,+ 16.5858+ ],+ [+ 22.7825,+ 16.4133+ ],+ [+ 23.0,+ 16.2679+ ],+ [+ 23.2346,+ 16.1522+ ],+ [+ 23.4824,+ 16.0681+ ],+ [+ 23.7389,+ 16.0171+ ],+ [+ 24.0,+ 16.0+ ],+ [+ 24.2611,+ 16.0171+ ],+ [+ 24.5176,+ 16.0681+ ],+ [+ 24.7654,+ 16.1522+ ],+ [+ 25.0,+ 16.2679+ ],+ [+ 25.2175,+ 16.4133+ ],+ [+ 25.4142,+ 16.5858+ ],+ [+ 25.5867,+ 16.7825+ ],+ [+ 25.7321,+ 17.0+ ],+ [+ 25.8478,+ 17.2346+ ],+ [+ 25.9319,+ 17.4824+ ],+ [+ 25.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 18.0+ ],+ [+ 31.9829,+ 18.2611+ ],+ [+ 31.9319,+ 18.5176+ ],+ [+ 31.8478,+ 18.7654+ ],+ [+ 31.7321,+ 19.0+ ],+ [+ 31.5867,+ 19.2175+ ],+ [+ 31.4142,+ 19.4142+ ],+ [+ 31.2175,+ 19.5867+ ],+ [+ 31.0,+ 19.7321+ ],+ [+ 30.7654,+ 19.8478+ ],+ [+ 30.5176,+ 19.9319+ ],+ [+ 30.2611,+ 19.9829+ ],+ [+ 30.0,+ 20.0+ ],+ [+ 29.7389,+ 19.9829+ ],+ [+ 29.4824,+ 19.9319+ ],+ [+ 29.2346,+ 19.8478+ ],+ [+ 29.0,+ 19.7321+ ],+ [+ 28.7825,+ 19.5867+ ],+ [+ 28.5858,+ 19.4142+ ],+ [+ 28.4133,+ 19.2175+ ],+ [+ 28.2679,+ 19.0+ ],+ [+ 28.1522,+ 18.7654+ ],+ [+ 28.0681,+ 18.5176+ ],+ [+ 28.0171,+ 18.2611+ ],+ [+ 28.0,+ 18.0+ ],+ [+ 28.0171,+ 17.7389+ ],+ [+ 28.0681,+ 17.4824+ ],+ [+ 28.1522,+ 17.2346+ ],+ [+ 28.2679,+ 17.0+ ],+ [+ 28.4133,+ 16.7825+ ],+ [+ 28.5858,+ 16.5858+ ],+ [+ 28.7825,+ 16.4133+ ],+ [+ 29.0,+ 16.2679+ ],+ [+ 29.2346,+ 16.1522+ ],+ [+ 29.4824,+ 16.0681+ ],+ [+ 29.7389,+ 16.0171+ ],+ [+ 30.0,+ 16.0+ ],+ [+ 30.2611,+ 16.0171+ ],+ [+ 30.5176,+ 16.0681+ ],+ [+ 30.7654,+ 16.1522+ ],+ [+ 31.0,+ 16.2679+ ],+ [+ 31.2175,+ 16.4133+ ],+ [+ 31.4142,+ 16.5858+ ],+ [+ 31.5867,+ 16.7825+ ],+ [+ 31.7321,+ 17.0+ ],+ [+ 31.8478,+ 17.2346+ ],+ [+ 31.9319,+ 17.4824+ ],+ [+ 31.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 18.0+ ],+ [+ 37.9829,+ 18.2611+ ],+ [+ 37.9319,+ 18.5176+ ],+ [+ 37.8478,+ 18.7654+ ],+ [+ 37.7321,+ 19.0+ ],+ [+ 37.5867,+ 19.2175+ ],+ [+ 37.4142,+ 19.4142+ ],+ [+ 37.2175,+ 19.5867+ ],+ [+ 37.0,+ 19.7321+ ],+ [+ 36.7654,+ 19.8478+ ],+ [+ 36.5176,+ 19.9319+ ],+ [+ 36.2611,+ 19.9829+ ],+ [+ 36.0,+ 20.0+ ],+ [+ 35.7389,+ 19.9829+ ],+ [+ 35.4824,+ 19.9319+ ],+ [+ 35.2346,+ 19.8478+ ],+ [+ 35.0,+ 19.7321+ ],+ [+ 34.7825,+ 19.5867+ ],+ [+ 34.5858,+ 19.4142+ ],+ [+ 34.4133,+ 19.2175+ ],+ [+ 34.2679,+ 19.0+ ],+ [+ 34.1522,+ 18.7654+ ],+ [+ 34.0681,+ 18.5176+ ],+ [+ 34.0171,+ 18.2611+ ],+ [+ 34.0,+ 18.0+ ],+ [+ 34.0171,+ 17.7389+ ],+ [+ 34.0681,+ 17.4824+ ],+ [+ 34.1522,+ 17.2346+ ],+ [+ 34.2679,+ 17.0+ ],+ [+ 34.4133,+ 16.7825+ ],+ [+ 34.5858,+ 16.5858+ ],+ [+ 34.7825,+ 16.4133+ ],+ [+ 35.0,+ 16.2679+ ],+ [+ 35.2346,+ 16.1522+ ],+ [+ 35.4824,+ 16.0681+ ],+ [+ 35.7389,+ 16.0171+ ],+ [+ 36.0,+ 16.0+ ],+ [+ 36.2611,+ 16.0171+ ],+ [+ 36.5176,+ 16.0681+ ],+ [+ 36.7654,+ 16.1522+ ],+ [+ 37.0,+ 16.2679+ ],+ [+ 37.2175,+ 16.4133+ ],+ [+ 37.4142,+ 16.5858+ ],+ [+ 37.5867,+ 16.7825+ ],+ [+ 37.7321,+ 17.0+ ],+ [+ 37.8478,+ 17.2346+ ],+ [+ 37.9319,+ 17.4824+ ],+ [+ 37.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 18.0+ ],+ [+ 43.9829,+ 18.2611+ ],+ [+ 43.9319,+ 18.5176+ ],+ [+ 43.8478,+ 18.7654+ ],+ [+ 43.7321,+ 19.0+ ],+ [+ 43.5867,+ 19.2175+ ],+ [+ 43.4142,+ 19.4142+ ],+ [+ 43.2175,+ 19.5867+ ],+ [+ 43.0,+ 19.7321+ ],+ [+ 42.7654,+ 19.8478+ ],+ [+ 42.5176,+ 19.9319+ ],+ [+ 42.2611,+ 19.9829+ ],+ [+ 42.0,+ 20.0+ ],+ [+ 41.7389,+ 19.9829+ ],+ [+ 41.4824,+ 19.9319+ ],+ [+ 41.2346,+ 19.8478+ ],+ [+ 41.0,+ 19.7321+ ],+ [+ 40.7825,+ 19.5867+ ],+ [+ 40.5858,+ 19.4142+ ],+ [+ 40.4133,+ 19.2175+ ],+ [+ 40.2679,+ 19.0+ ],+ [+ 40.1522,+ 18.7654+ ],+ [+ 40.0681,+ 18.5176+ ],+ [+ 40.0171,+ 18.2611+ ],+ [+ 40.0,+ 18.0+ ],+ [+ 40.0171,+ 17.7389+ ],+ [+ 40.0681,+ 17.4824+ ],+ [+ 40.1522,+ 17.2346+ ],+ [+ 40.2679,+ 17.0+ ],+ [+ 40.4133,+ 16.7825+ ],+ [+ 40.5858,+ 16.5858+ ],+ [+ 40.7825,+ 16.4133+ ],+ [+ 41.0,+ 16.2679+ ],+ [+ 41.2346,+ 16.1522+ ],+ [+ 41.4824,+ 16.0681+ ],+ [+ 41.7389,+ 16.0171+ ],+ [+ 42.0,+ 16.0+ ],+ [+ 42.2611,+ 16.0171+ ],+ [+ 42.5176,+ 16.0681+ ],+ [+ 42.7654,+ 16.1522+ ],+ [+ 43.0,+ 16.2679+ ],+ [+ 43.2175,+ 16.4133+ ],+ [+ 43.4142,+ 16.5858+ ],+ [+ 43.5867,+ 16.7825+ ],+ [+ 43.7321,+ 17.0+ ],+ [+ 43.8478,+ 17.2346+ ],+ [+ 43.9319,+ 17.4824+ ],+ [+ 43.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 18.0+ ],+ [+ 49.9829,+ 18.2611+ ],+ [+ 49.9319,+ 18.5176+ ],+ [+ 49.8478,+ 18.7654+ ],+ [+ 49.7321,+ 19.0+ ],+ [+ 49.5867,+ 19.2175+ ],+ [+ 49.4142,+ 19.4142+ ],+ [+ 49.2175,+ 19.5867+ ],+ [+ 49.0,+ 19.7321+ ],+ [+ 48.7654,+ 19.8478+ ],+ [+ 48.5176,+ 19.9319+ ],+ [+ 48.2611,+ 19.9829+ ],+ [+ 48.0,+ 20.0+ ],+ [+ 47.7389,+ 19.9829+ ],+ [+ 47.4824,+ 19.9319+ ],+ [+ 47.2346,+ 19.8478+ ],+ [+ 47.0,+ 19.7321+ ],+ [+ 46.7825,+ 19.5867+ ],+ [+ 46.5858,+ 19.4142+ ],+ [+ 46.4133,+ 19.2175+ ],+ [+ 46.2679,+ 19.0+ ],+ [+ 46.1522,+ 18.7654+ ],+ [+ 46.0681,+ 18.5176+ ],+ [+ 46.0171,+ 18.2611+ ],+ [+ 46.0,+ 18.0+ ],+ [+ 46.0171,+ 17.7389+ ],+ [+ 46.0681,+ 17.4824+ ],+ [+ 46.1522,+ 17.2346+ ],+ [+ 46.2679,+ 17.0+ ],+ [+ 46.4133,+ 16.7825+ ],+ [+ 46.5858,+ 16.5858+ ],+ [+ 46.7825,+ 16.4133+ ],+ [+ 47.0,+ 16.2679+ ],+ [+ 47.2346,+ 16.1522+ ],+ [+ 47.4824,+ 16.0681+ ],+ [+ 47.7389,+ 16.0171+ ],+ [+ 48.0,+ 16.0+ ],+ [+ 48.2611,+ 16.0171+ ],+ [+ 48.5176,+ 16.0681+ ],+ [+ 48.7654,+ 16.1522+ ],+ [+ 49.0,+ 16.2679+ ],+ [+ 49.2175,+ 16.4133+ ],+ [+ 49.4142,+ 16.5858+ ],+ [+ 49.5867,+ 16.7825+ ],+ [+ 49.7321,+ 17.0+ ],+ [+ 49.8478,+ 17.2346+ ],+ [+ 49.9319,+ 17.4824+ ],+ [+ 49.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 18.0+ ],+ [+ 55.9829,+ 18.2611+ ],+ [+ 55.9319,+ 18.5176+ ],+ [+ 55.8478,+ 18.7654+ ],+ [+ 55.7321,+ 19.0+ ],+ [+ 55.5867,+ 19.2175+ ],+ [+ 55.4142,+ 19.4142+ ],+ [+ 55.2175,+ 19.5867+ ],+ [+ 55.0,+ 19.7321+ ],+ [+ 54.7654,+ 19.8478+ ],+ [+ 54.5176,+ 19.9319+ ],+ [+ 54.2611,+ 19.9829+ ],+ [+ 54.0,+ 20.0+ ],+ [+ 53.7389,+ 19.9829+ ],+ [+ 53.4824,+ 19.9319+ ],+ [+ 53.2346,+ 19.8478+ ],+ [+ 53.0,+ 19.7321+ ],+ [+ 52.7825,+ 19.5867+ ],+ [+ 52.5858,+ 19.4142+ ],+ [+ 52.4133,+ 19.2175+ ],+ [+ 52.2679,+ 19.0+ ],+ [+ 52.1522,+ 18.7654+ ],+ [+ 52.0681,+ 18.5176+ ],+ [+ 52.0171,+ 18.2611+ ],+ [+ 52.0,+ 18.0+ ],+ [+ 52.0171,+ 17.7389+ ],+ [+ 52.0681,+ 17.4824+ ],+ [+ 52.1522,+ 17.2346+ ],+ [+ 52.2679,+ 17.0+ ],+ [+ 52.4133,+ 16.7825+ ],+ [+ 52.5858,+ 16.5858+ ],+ [+ 52.7825,+ 16.4133+ ],+ [+ 53.0,+ 16.2679+ ],+ [+ 53.2346,+ 16.1522+ ],+ [+ 53.4824,+ 16.0681+ ],+ [+ 53.7389,+ 16.0171+ ],+ [+ 54.0,+ 16.0+ ],+ [+ 54.2611,+ 16.0171+ ],+ [+ 54.5176,+ 16.0681+ ],+ [+ 54.7654,+ 16.1522+ ],+ [+ 55.0,+ 16.2679+ ],+ [+ 55.2175,+ 16.4133+ ],+ [+ 55.4142,+ 16.5858+ ],+ [+ 55.5867,+ 16.7825+ ],+ [+ 55.7321,+ 17.0+ ],+ [+ 55.8478,+ 17.2346+ ],+ [+ 55.9319,+ 17.4824+ ],+ [+ 55.9829,+ 17.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 24.0+ ],+ [+ 1.9829,+ 24.2611+ ],+ [+ 1.9319,+ 24.5176+ ],+ [+ 1.8478,+ 24.7654+ ],+ [+ 1.7321,+ 25.0+ ],+ [+ 1.5867,+ 25.2175+ ],+ [+ 1.4142,+ 25.4142+ ],+ [+ 1.2175,+ 25.5867+ ],+ [+ 1.0,+ 25.7321+ ],+ [+ 0.7654,+ 25.8478+ ],+ [+ 0.5176,+ 25.9319+ ],+ [+ 0.2611,+ 25.9829+ ],+ [+ 0.0,+ 26.0+ ],+ [+ -0.2611,+ 25.9829+ ],+ [+ -0.5176,+ 25.9319+ ],+ [+ -0.7654,+ 25.8478+ ],+ [+ -1.0,+ 25.7321+ ],+ [+ -1.2175,+ 25.5867+ ],+ [+ -1.4142,+ 25.4142+ ],+ [+ -1.5867,+ 25.2175+ ],+ [+ -1.7321,+ 25.0+ ],+ [+ -1.8478,+ 24.7654+ ],+ [+ -1.9319,+ 24.5176+ ],+ [+ -1.9829,+ 24.2611+ ],+ [+ -2.0,+ 24.0+ ],+ [+ -1.9829,+ 23.7389+ ],+ [+ -1.9319,+ 23.4824+ ],+ [+ -1.8478,+ 23.2346+ ],+ [+ -1.7321,+ 23.0+ ],+ [+ -1.5867,+ 22.7825+ ],+ [+ -1.4142,+ 22.5858+ ],+ [+ -1.2175,+ 22.4133+ ],+ [+ -1.0,+ 22.2679+ ],+ [+ -0.7654,+ 22.1522+ ],+ [+ -0.5176,+ 22.0681+ ],+ [+ -0.2611,+ 22.0171+ ],+ [+ -0.0,+ 22.0+ ],+ [+ 0.2611,+ 22.0171+ ],+ [+ 0.5176,+ 22.0681+ ],+ [+ 0.7654,+ 22.1522+ ],+ [+ 1.0,+ 22.2679+ ],+ [+ 1.2175,+ 22.4133+ ],+ [+ 1.4142,+ 22.5858+ ],+ [+ 1.5867,+ 22.7825+ ],+ [+ 1.7321,+ 23.0+ ],+ [+ 1.8478,+ 23.2346+ ],+ [+ 1.9319,+ 23.4824+ ],+ [+ 1.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 24.0+ ],+ [+ 7.9829,+ 24.2611+ ],+ [+ 7.9319,+ 24.5176+ ],+ [+ 7.8478,+ 24.7654+ ],+ [+ 7.7321,+ 25.0+ ],+ [+ 7.5867,+ 25.2175+ ],+ [+ 7.4142,+ 25.4142+ ],+ [+ 7.2175,+ 25.5867+ ],+ [+ 7.0,+ 25.7321+ ],+ [+ 6.7654,+ 25.8478+ ],+ [+ 6.5176,+ 25.9319+ ],+ [+ 6.2611,+ 25.9829+ ],+ [+ 6.0,+ 26.0+ ],+ [+ 5.7389,+ 25.9829+ ],+ [+ 5.4824,+ 25.9319+ ],+ [+ 5.2346,+ 25.8478+ ],+ [+ 5.0,+ 25.7321+ ],+ [+ 4.7825,+ 25.5867+ ],+ [+ 4.5858,+ 25.4142+ ],+ [+ 4.4133,+ 25.2175+ ],+ [+ 4.2679,+ 25.0+ ],+ [+ 4.1522,+ 24.7654+ ],+ [+ 4.0681,+ 24.5176+ ],+ [+ 4.0171,+ 24.2611+ ],+ [+ 4.0,+ 24.0+ ],+ [+ 4.0171,+ 23.7389+ ],+ [+ 4.0681,+ 23.4824+ ],+ [+ 4.1522,+ 23.2346+ ],+ [+ 4.2679,+ 23.0+ ],+ [+ 4.4133,+ 22.7825+ ],+ [+ 4.5858,+ 22.5858+ ],+ [+ 4.7825,+ 22.4133+ ],+ [+ 5.0,+ 22.2679+ ],+ [+ 5.2346,+ 22.1522+ ],+ [+ 5.4824,+ 22.0681+ ],+ [+ 5.7389,+ 22.0171+ ],+ [+ 6.0,+ 22.0+ ],+ [+ 6.2611,+ 22.0171+ ],+ [+ 6.5176,+ 22.0681+ ],+ [+ 6.7654,+ 22.1522+ ],+ [+ 7.0,+ 22.2679+ ],+ [+ 7.2175,+ 22.4133+ ],+ [+ 7.4142,+ 22.5858+ ],+ [+ 7.5867,+ 22.7825+ ],+ [+ 7.7321,+ 23.0+ ],+ [+ 7.8478,+ 23.2346+ ],+ [+ 7.9319,+ 23.4824+ ],+ [+ 7.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 24.0+ ],+ [+ 13.9829,+ 24.2611+ ],+ [+ 13.9319,+ 24.5176+ ],+ [+ 13.8478,+ 24.7654+ ],+ [+ 13.7321,+ 25.0+ ],+ [+ 13.5867,+ 25.2175+ ],+ [+ 13.4142,+ 25.4142+ ],+ [+ 13.2175,+ 25.5867+ ],+ [+ 13.0,+ 25.7321+ ],+ [+ 12.7654,+ 25.8478+ ],+ [+ 12.5176,+ 25.9319+ ],+ [+ 12.2611,+ 25.9829+ ],+ [+ 12.0,+ 26.0+ ],+ [+ 11.7389,+ 25.9829+ ],+ [+ 11.4824,+ 25.9319+ ],+ [+ 11.2346,+ 25.8478+ ],+ [+ 11.0,+ 25.7321+ ],+ [+ 10.7825,+ 25.5867+ ],+ [+ 10.5858,+ 25.4142+ ],+ [+ 10.4133,+ 25.2175+ ],+ [+ 10.2679,+ 25.0+ ],+ [+ 10.1522,+ 24.7654+ ],+ [+ 10.0681,+ 24.5176+ ],+ [+ 10.0171,+ 24.2611+ ],+ [+ 10.0,+ 24.0+ ],+ [+ 10.0171,+ 23.7389+ ],+ [+ 10.0681,+ 23.4824+ ],+ [+ 10.1522,+ 23.2346+ ],+ [+ 10.2679,+ 23.0+ ],+ [+ 10.4133,+ 22.7825+ ],+ [+ 10.5858,+ 22.5858+ ],+ [+ 10.7825,+ 22.4133+ ],+ [+ 11.0,+ 22.2679+ ],+ [+ 11.2346,+ 22.1522+ ],+ [+ 11.4824,+ 22.0681+ ],+ [+ 11.7389,+ 22.0171+ ],+ [+ 12.0,+ 22.0+ ],+ [+ 12.2611,+ 22.0171+ ],+ [+ 12.5176,+ 22.0681+ ],+ [+ 12.7654,+ 22.1522+ ],+ [+ 13.0,+ 22.2679+ ],+ [+ 13.2175,+ 22.4133+ ],+ [+ 13.4142,+ 22.5858+ ],+ [+ 13.5867,+ 22.7825+ ],+ [+ 13.7321,+ 23.0+ ],+ [+ 13.8478,+ 23.2346+ ],+ [+ 13.9319,+ 23.4824+ ],+ [+ 13.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 24.0+ ],+ [+ 19.9829,+ 24.2611+ ],+ [+ 19.9319,+ 24.5176+ ],+ [+ 19.8478,+ 24.7654+ ],+ [+ 19.7321,+ 25.0+ ],+ [+ 19.5867,+ 25.2175+ ],+ [+ 19.4142,+ 25.4142+ ],+ [+ 19.2175,+ 25.5867+ ],+ [+ 19.0,+ 25.7321+ ],+ [+ 18.7654,+ 25.8478+ ],+ [+ 18.5176,+ 25.9319+ ],+ [+ 18.2611,+ 25.9829+ ],+ [+ 18.0,+ 26.0+ ],+ [+ 17.7389,+ 25.9829+ ],+ [+ 17.4824,+ 25.9319+ ],+ [+ 17.2346,+ 25.8478+ ],+ [+ 17.0,+ 25.7321+ ],+ [+ 16.7825,+ 25.5867+ ],+ [+ 16.5858,+ 25.4142+ ],+ [+ 16.4133,+ 25.2175+ ],+ [+ 16.2679,+ 25.0+ ],+ [+ 16.1522,+ 24.7654+ ],+ [+ 16.0681,+ 24.5176+ ],+ [+ 16.0171,+ 24.2611+ ],+ [+ 16.0,+ 24.0+ ],+ [+ 16.0171,+ 23.7389+ ],+ [+ 16.0681,+ 23.4824+ ],+ [+ 16.1522,+ 23.2346+ ],+ [+ 16.2679,+ 23.0+ ],+ [+ 16.4133,+ 22.7825+ ],+ [+ 16.5858,+ 22.5858+ ],+ [+ 16.7825,+ 22.4133+ ],+ [+ 17.0,+ 22.2679+ ],+ [+ 17.2346,+ 22.1522+ ],+ [+ 17.4824,+ 22.0681+ ],+ [+ 17.7389,+ 22.0171+ ],+ [+ 18.0,+ 22.0+ ],+ [+ 18.2611,+ 22.0171+ ],+ [+ 18.5176,+ 22.0681+ ],+ [+ 18.7654,+ 22.1522+ ],+ [+ 19.0,+ 22.2679+ ],+ [+ 19.2175,+ 22.4133+ ],+ [+ 19.4142,+ 22.5858+ ],+ [+ 19.5867,+ 22.7825+ ],+ [+ 19.7321,+ 23.0+ ],+ [+ 19.8478,+ 23.2346+ ],+ [+ 19.9319,+ 23.4824+ ],+ [+ 19.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 24.0+ ],+ [+ 25.9829,+ 24.2611+ ],+ [+ 25.9319,+ 24.5176+ ],+ [+ 25.8478,+ 24.7654+ ],+ [+ 25.7321,+ 25.0+ ],+ [+ 25.5867,+ 25.2175+ ],+ [+ 25.4142,+ 25.4142+ ],+ [+ 25.2175,+ 25.5867+ ],+ [+ 25.0,+ 25.7321+ ],+ [+ 24.7654,+ 25.8478+ ],+ [+ 24.5176,+ 25.9319+ ],+ [+ 24.2611,+ 25.9829+ ],+ [+ 24.0,+ 26.0+ ],+ [+ 23.7389,+ 25.9829+ ],+ [+ 23.4824,+ 25.9319+ ],+ [+ 23.2346,+ 25.8478+ ],+ [+ 23.0,+ 25.7321+ ],+ [+ 22.7825,+ 25.5867+ ],+ [+ 22.5858,+ 25.4142+ ],+ [+ 22.4133,+ 25.2175+ ],+ [+ 22.2679,+ 25.0+ ],+ [+ 22.1522,+ 24.7654+ ],+ [+ 22.0681,+ 24.5176+ ],+ [+ 22.0171,+ 24.2611+ ],+ [+ 22.0,+ 24.0+ ],+ [+ 22.0171,+ 23.7389+ ],+ [+ 22.0681,+ 23.4824+ ],+ [+ 22.1522,+ 23.2346+ ],+ [+ 22.2679,+ 23.0+ ],+ [+ 22.4133,+ 22.7825+ ],+ [+ 22.5858,+ 22.5858+ ],+ [+ 22.7825,+ 22.4133+ ],+ [+ 23.0,+ 22.2679+ ],+ [+ 23.2346,+ 22.1522+ ],+ [+ 23.4824,+ 22.0681+ ],+ [+ 23.7389,+ 22.0171+ ],+ [+ 24.0,+ 22.0+ ],+ [+ 24.2611,+ 22.0171+ ],+ [+ 24.5176,+ 22.0681+ ],+ [+ 24.7654,+ 22.1522+ ],+ [+ 25.0,+ 22.2679+ ],+ [+ 25.2175,+ 22.4133+ ],+ [+ 25.4142,+ 22.5858+ ],+ [+ 25.5867,+ 22.7825+ ],+ [+ 25.7321,+ 23.0+ ],+ [+ 25.8478,+ 23.2346+ ],+ [+ 25.9319,+ 23.4824+ ],+ [+ 25.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 24.0+ ],+ [+ 31.9829,+ 24.2611+ ],+ [+ 31.9319,+ 24.5176+ ],+ [+ 31.8478,+ 24.7654+ ],+ [+ 31.7321,+ 25.0+ ],+ [+ 31.5867,+ 25.2175+ ],+ [+ 31.4142,+ 25.4142+ ],+ [+ 31.2175,+ 25.5867+ ],+ [+ 31.0,+ 25.7321+ ],+ [+ 30.7654,+ 25.8478+ ],+ [+ 30.5176,+ 25.9319+ ],+ [+ 30.2611,+ 25.9829+ ],+ [+ 30.0,+ 26.0+ ],+ [+ 29.7389,+ 25.9829+ ],+ [+ 29.4824,+ 25.9319+ ],+ [+ 29.2346,+ 25.8478+ ],+ [+ 29.0,+ 25.7321+ ],+ [+ 28.7825,+ 25.5867+ ],+ [+ 28.5858,+ 25.4142+ ],+ [+ 28.4133,+ 25.2175+ ],+ [+ 28.2679,+ 25.0+ ],+ [+ 28.1522,+ 24.7654+ ],+ [+ 28.0681,+ 24.5176+ ],+ [+ 28.0171,+ 24.2611+ ],+ [+ 28.0,+ 24.0+ ],+ [+ 28.0171,+ 23.7389+ ],+ [+ 28.0681,+ 23.4824+ ],+ [+ 28.1522,+ 23.2346+ ],+ [+ 28.2679,+ 23.0+ ],+ [+ 28.4133,+ 22.7825+ ],+ [+ 28.5858,+ 22.5858+ ],+ [+ 28.7825,+ 22.4133+ ],+ [+ 29.0,+ 22.2679+ ],+ [+ 29.2346,+ 22.1522+ ],+ [+ 29.4824,+ 22.0681+ ],+ [+ 29.7389,+ 22.0171+ ],+ [+ 30.0,+ 22.0+ ],+ [+ 30.2611,+ 22.0171+ ],+ [+ 30.5176,+ 22.0681+ ],+ [+ 30.7654,+ 22.1522+ ],+ [+ 31.0,+ 22.2679+ ],+ [+ 31.2175,+ 22.4133+ ],+ [+ 31.4142,+ 22.5858+ ],+ [+ 31.5867,+ 22.7825+ ],+ [+ 31.7321,+ 23.0+ ],+ [+ 31.8478,+ 23.2346+ ],+ [+ 31.9319,+ 23.4824+ ],+ [+ 31.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 24.0+ ],+ [+ 37.9829,+ 24.2611+ ],+ [+ 37.9319,+ 24.5176+ ],+ [+ 37.8478,+ 24.7654+ ],+ [+ 37.7321,+ 25.0+ ],+ [+ 37.5867,+ 25.2175+ ],+ [+ 37.4142,+ 25.4142+ ],+ [+ 37.2175,+ 25.5867+ ],+ [+ 37.0,+ 25.7321+ ],+ [+ 36.7654,+ 25.8478+ ],+ [+ 36.5176,+ 25.9319+ ],+ [+ 36.2611,+ 25.9829+ ],+ [+ 36.0,+ 26.0+ ],+ [+ 35.7389,+ 25.9829+ ],+ [+ 35.4824,+ 25.9319+ ],+ [+ 35.2346,+ 25.8478+ ],+ [+ 35.0,+ 25.7321+ ],+ [+ 34.7825,+ 25.5867+ ],+ [+ 34.5858,+ 25.4142+ ],+ [+ 34.4133,+ 25.2175+ ],+ [+ 34.2679,+ 25.0+ ],+ [+ 34.1522,+ 24.7654+ ],+ [+ 34.0681,+ 24.5176+ ],+ [+ 34.0171,+ 24.2611+ ],+ [+ 34.0,+ 24.0+ ],+ [+ 34.0171,+ 23.7389+ ],+ [+ 34.0681,+ 23.4824+ ],+ [+ 34.1522,+ 23.2346+ ],+ [+ 34.2679,+ 23.0+ ],+ [+ 34.4133,+ 22.7825+ ],+ [+ 34.5858,+ 22.5858+ ],+ [+ 34.7825,+ 22.4133+ ],+ [+ 35.0,+ 22.2679+ ],+ [+ 35.2346,+ 22.1522+ ],+ [+ 35.4824,+ 22.0681+ ],+ [+ 35.7389,+ 22.0171+ ],+ [+ 36.0,+ 22.0+ ],+ [+ 36.2611,+ 22.0171+ ],+ [+ 36.5176,+ 22.0681+ ],+ [+ 36.7654,+ 22.1522+ ],+ [+ 37.0,+ 22.2679+ ],+ [+ 37.2175,+ 22.4133+ ],+ [+ 37.4142,+ 22.5858+ ],+ [+ 37.5867,+ 22.7825+ ],+ [+ 37.7321,+ 23.0+ ],+ [+ 37.8478,+ 23.2346+ ],+ [+ 37.9319,+ 23.4824+ ],+ [+ 37.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 24.0+ ],+ [+ 43.9829,+ 24.2611+ ],+ [+ 43.9319,+ 24.5176+ ],+ [+ 43.8478,+ 24.7654+ ],+ [+ 43.7321,+ 25.0+ ],+ [+ 43.5867,+ 25.2175+ ],+ [+ 43.4142,+ 25.4142+ ],+ [+ 43.2175,+ 25.5867+ ],+ [+ 43.0,+ 25.7321+ ],+ [+ 42.7654,+ 25.8478+ ],+ [+ 42.5176,+ 25.9319+ ],+ [+ 42.2611,+ 25.9829+ ],+ [+ 42.0,+ 26.0+ ],+ [+ 41.7389,+ 25.9829+ ],+ [+ 41.4824,+ 25.9319+ ],+ [+ 41.2346,+ 25.8478+ ],+ [+ 41.0,+ 25.7321+ ],+ [+ 40.7825,+ 25.5867+ ],+ [+ 40.5858,+ 25.4142+ ],+ [+ 40.4133,+ 25.2175+ ],+ [+ 40.2679,+ 25.0+ ],+ [+ 40.1522,+ 24.7654+ ],+ [+ 40.0681,+ 24.5176+ ],+ [+ 40.0171,+ 24.2611+ ],+ [+ 40.0,+ 24.0+ ],+ [+ 40.0171,+ 23.7389+ ],+ [+ 40.0681,+ 23.4824+ ],+ [+ 40.1522,+ 23.2346+ ],+ [+ 40.2679,+ 23.0+ ],+ [+ 40.4133,+ 22.7825+ ],+ [+ 40.5858,+ 22.5858+ ],+ [+ 40.7825,+ 22.4133+ ],+ [+ 41.0,+ 22.2679+ ],+ [+ 41.2346,+ 22.1522+ ],+ [+ 41.4824,+ 22.0681+ ],+ [+ 41.7389,+ 22.0171+ ],+ [+ 42.0,+ 22.0+ ],+ [+ 42.2611,+ 22.0171+ ],+ [+ 42.5176,+ 22.0681+ ],+ [+ 42.7654,+ 22.1522+ ],+ [+ 43.0,+ 22.2679+ ],+ [+ 43.2175,+ 22.4133+ ],+ [+ 43.4142,+ 22.5858+ ],+ [+ 43.5867,+ 22.7825+ ],+ [+ 43.7321,+ 23.0+ ],+ [+ 43.8478,+ 23.2346+ ],+ [+ 43.9319,+ 23.4824+ ],+ [+ 43.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 24.0+ ],+ [+ 49.9829,+ 24.2611+ ],+ [+ 49.9319,+ 24.5176+ ],+ [+ 49.8478,+ 24.7654+ ],+ [+ 49.7321,+ 25.0+ ],+ [+ 49.5867,+ 25.2175+ ],+ [+ 49.4142,+ 25.4142+ ],+ [+ 49.2175,+ 25.5867+ ],+ [+ 49.0,+ 25.7321+ ],+ [+ 48.7654,+ 25.8478+ ],+ [+ 48.5176,+ 25.9319+ ],+ [+ 48.2611,+ 25.9829+ ],+ [+ 48.0,+ 26.0+ ],+ [+ 47.7389,+ 25.9829+ ],+ [+ 47.4824,+ 25.9319+ ],+ [+ 47.2346,+ 25.8478+ ],+ [+ 47.0,+ 25.7321+ ],+ [+ 46.7825,+ 25.5867+ ],+ [+ 46.5858,+ 25.4142+ ],+ [+ 46.4133,+ 25.2175+ ],+ [+ 46.2679,+ 25.0+ ],+ [+ 46.1522,+ 24.7654+ ],+ [+ 46.0681,+ 24.5176+ ],+ [+ 46.0171,+ 24.2611+ ],+ [+ 46.0,+ 24.0+ ],+ [+ 46.0171,+ 23.7389+ ],+ [+ 46.0681,+ 23.4824+ ],+ [+ 46.1522,+ 23.2346+ ],+ [+ 46.2679,+ 23.0+ ],+ [+ 46.4133,+ 22.7825+ ],+ [+ 46.5858,+ 22.5858+ ],+ [+ 46.7825,+ 22.4133+ ],+ [+ 47.0,+ 22.2679+ ],+ [+ 47.2346,+ 22.1522+ ],+ [+ 47.4824,+ 22.0681+ ],+ [+ 47.7389,+ 22.0171+ ],+ [+ 48.0,+ 22.0+ ],+ [+ 48.2611,+ 22.0171+ ],+ [+ 48.5176,+ 22.0681+ ],+ [+ 48.7654,+ 22.1522+ ],+ [+ 49.0,+ 22.2679+ ],+ [+ 49.2175,+ 22.4133+ ],+ [+ 49.4142,+ 22.5858+ ],+ [+ 49.5867,+ 22.7825+ ],+ [+ 49.7321,+ 23.0+ ],+ [+ 49.8478,+ 23.2346+ ],+ [+ 49.9319,+ 23.4824+ ],+ [+ 49.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 24.0+ ],+ [+ 55.9829,+ 24.2611+ ],+ [+ 55.9319,+ 24.5176+ ],+ [+ 55.8478,+ 24.7654+ ],+ [+ 55.7321,+ 25.0+ ],+ [+ 55.5867,+ 25.2175+ ],+ [+ 55.4142,+ 25.4142+ ],+ [+ 55.2175,+ 25.5867+ ],+ [+ 55.0,+ 25.7321+ ],+ [+ 54.7654,+ 25.8478+ ],+ [+ 54.5176,+ 25.9319+ ],+ [+ 54.2611,+ 25.9829+ ],+ [+ 54.0,+ 26.0+ ],+ [+ 53.7389,+ 25.9829+ ],+ [+ 53.4824,+ 25.9319+ ],+ [+ 53.2346,+ 25.8478+ ],+ [+ 53.0,+ 25.7321+ ],+ [+ 52.7825,+ 25.5867+ ],+ [+ 52.5858,+ 25.4142+ ],+ [+ 52.4133,+ 25.2175+ ],+ [+ 52.2679,+ 25.0+ ],+ [+ 52.1522,+ 24.7654+ ],+ [+ 52.0681,+ 24.5176+ ],+ [+ 52.0171,+ 24.2611+ ],+ [+ 52.0,+ 24.0+ ],+ [+ 52.0171,+ 23.7389+ ],+ [+ 52.0681,+ 23.4824+ ],+ [+ 52.1522,+ 23.2346+ ],+ [+ 52.2679,+ 23.0+ ],+ [+ 52.4133,+ 22.7825+ ],+ [+ 52.5858,+ 22.5858+ ],+ [+ 52.7825,+ 22.4133+ ],+ [+ 53.0,+ 22.2679+ ],+ [+ 53.2346,+ 22.1522+ ],+ [+ 53.4824,+ 22.0681+ ],+ [+ 53.7389,+ 22.0171+ ],+ [+ 54.0,+ 22.0+ ],+ [+ 54.2611,+ 22.0171+ ],+ [+ 54.5176,+ 22.0681+ ],+ [+ 54.7654,+ 22.1522+ ],+ [+ 55.0,+ 22.2679+ ],+ [+ 55.2175,+ 22.4133+ ],+ [+ 55.4142,+ 22.5858+ ],+ [+ 55.5867,+ 22.7825+ ],+ [+ 55.7321,+ 23.0+ ],+ [+ 55.8478,+ 23.2346+ ],+ [+ 55.9319,+ 23.4824+ ],+ [+ 55.9829,+ 23.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 30.0+ ],+ [+ 1.9829,+ 30.2611+ ],+ [+ 1.9319,+ 30.5176+ ],+ [+ 1.8478,+ 30.7654+ ],+ [+ 1.7321,+ 31.0+ ],+ [+ 1.5867,+ 31.2175+ ],+ [+ 1.4142,+ 31.4142+ ],+ [+ 1.2175,+ 31.5867+ ],+ [+ 1.0,+ 31.7321+ ],+ [+ 0.7654,+ 31.8478+ ],+ [+ 0.5176,+ 31.9319+ ],+ [+ 0.2611,+ 31.9829+ ],+ [+ 0.0,+ 32.0+ ],+ [+ -0.2611,+ 31.9829+ ],+ [+ -0.5176,+ 31.9319+ ],+ [+ -0.7654,+ 31.8478+ ],+ [+ -1.0,+ 31.7321+ ],+ [+ -1.2175,+ 31.5867+ ],+ [+ -1.4142,+ 31.4142+ ],+ [+ -1.5867,+ 31.2175+ ],+ [+ -1.7321,+ 31.0+ ],+ [+ -1.8478,+ 30.7654+ ],+ [+ -1.9319,+ 30.5176+ ],+ [+ -1.9829,+ 30.2611+ ],+ [+ -2.0,+ 30.0+ ],+ [+ -1.9829,+ 29.7389+ ],+ [+ -1.9319,+ 29.4824+ ],+ [+ -1.8478,+ 29.2346+ ],+ [+ -1.7321,+ 29.0+ ],+ [+ -1.5867,+ 28.7825+ ],+ [+ -1.4142,+ 28.5858+ ],+ [+ -1.2175,+ 28.4133+ ],+ [+ -1.0,+ 28.2679+ ],+ [+ -0.7654,+ 28.1522+ ],+ [+ -0.5176,+ 28.0681+ ],+ [+ -0.2611,+ 28.0171+ ],+ [+ -0.0,+ 28.0+ ],+ [+ 0.2611,+ 28.0171+ ],+ [+ 0.5176,+ 28.0681+ ],+ [+ 0.7654,+ 28.1522+ ],+ [+ 1.0,+ 28.2679+ ],+ [+ 1.2175,+ 28.4133+ ],+ [+ 1.4142,+ 28.5858+ ],+ [+ 1.5867,+ 28.7825+ ],+ [+ 1.7321,+ 29.0+ ],+ [+ 1.8478,+ 29.2346+ ],+ [+ 1.9319,+ 29.4824+ ],+ [+ 1.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 30.0+ ],+ [+ 7.9829,+ 30.2611+ ],+ [+ 7.9319,+ 30.5176+ ],+ [+ 7.8478,+ 30.7654+ ],+ [+ 7.7321,+ 31.0+ ],+ [+ 7.5867,+ 31.2175+ ],+ [+ 7.4142,+ 31.4142+ ],+ [+ 7.2175,+ 31.5867+ ],+ [+ 7.0,+ 31.7321+ ],+ [+ 6.7654,+ 31.8478+ ],+ [+ 6.5176,+ 31.9319+ ],+ [+ 6.2611,+ 31.9829+ ],+ [+ 6.0,+ 32.0+ ],+ [+ 5.7389,+ 31.9829+ ],+ [+ 5.4824,+ 31.9319+ ],+ [+ 5.2346,+ 31.8478+ ],+ [+ 5.0,+ 31.7321+ ],+ [+ 4.7825,+ 31.5867+ ],+ [+ 4.5858,+ 31.4142+ ],+ [+ 4.4133,+ 31.2175+ ],+ [+ 4.2679,+ 31.0+ ],+ [+ 4.1522,+ 30.7654+ ],+ [+ 4.0681,+ 30.5176+ ],+ [+ 4.0171,+ 30.2611+ ],+ [+ 4.0,+ 30.0+ ],+ [+ 4.0171,+ 29.7389+ ],+ [+ 4.0681,+ 29.4824+ ],+ [+ 4.1522,+ 29.2346+ ],+ [+ 4.2679,+ 29.0+ ],+ [+ 4.4133,+ 28.7825+ ],+ [+ 4.5858,+ 28.5858+ ],+ [+ 4.7825,+ 28.4133+ ],+ [+ 5.0,+ 28.2679+ ],+ [+ 5.2346,+ 28.1522+ ],+ [+ 5.4824,+ 28.0681+ ],+ [+ 5.7389,+ 28.0171+ ],+ [+ 6.0,+ 28.0+ ],+ [+ 6.2611,+ 28.0171+ ],+ [+ 6.5176,+ 28.0681+ ],+ [+ 6.7654,+ 28.1522+ ],+ [+ 7.0,+ 28.2679+ ],+ [+ 7.2175,+ 28.4133+ ],+ [+ 7.4142,+ 28.5858+ ],+ [+ 7.5867,+ 28.7825+ ],+ [+ 7.7321,+ 29.0+ ],+ [+ 7.8478,+ 29.2346+ ],+ [+ 7.9319,+ 29.4824+ ],+ [+ 7.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 30.0+ ],+ [+ 13.9829,+ 30.2611+ ],+ [+ 13.9319,+ 30.5176+ ],+ [+ 13.8478,+ 30.7654+ ],+ [+ 13.7321,+ 31.0+ ],+ [+ 13.5867,+ 31.2175+ ],+ [+ 13.4142,+ 31.4142+ ],+ [+ 13.2175,+ 31.5867+ ],+ [+ 13.0,+ 31.7321+ ],+ [+ 12.7654,+ 31.8478+ ],+ [+ 12.5176,+ 31.9319+ ],+ [+ 12.2611,+ 31.9829+ ],+ [+ 12.0,+ 32.0+ ],+ [+ 11.7389,+ 31.9829+ ],+ [+ 11.4824,+ 31.9319+ ],+ [+ 11.2346,+ 31.8478+ ],+ [+ 11.0,+ 31.7321+ ],+ [+ 10.7825,+ 31.5867+ ],+ [+ 10.5858,+ 31.4142+ ],+ [+ 10.4133,+ 31.2175+ ],+ [+ 10.2679,+ 31.0+ ],+ [+ 10.1522,+ 30.7654+ ],+ [+ 10.0681,+ 30.5176+ ],+ [+ 10.0171,+ 30.2611+ ],+ [+ 10.0,+ 30.0+ ],+ [+ 10.0171,+ 29.7389+ ],+ [+ 10.0681,+ 29.4824+ ],+ [+ 10.1522,+ 29.2346+ ],+ [+ 10.2679,+ 29.0+ ],+ [+ 10.4133,+ 28.7825+ ],+ [+ 10.5858,+ 28.5858+ ],+ [+ 10.7825,+ 28.4133+ ],+ [+ 11.0,+ 28.2679+ ],+ [+ 11.2346,+ 28.1522+ ],+ [+ 11.4824,+ 28.0681+ ],+ [+ 11.7389,+ 28.0171+ ],+ [+ 12.0,+ 28.0+ ],+ [+ 12.2611,+ 28.0171+ ],+ [+ 12.5176,+ 28.0681+ ],+ [+ 12.7654,+ 28.1522+ ],+ [+ 13.0,+ 28.2679+ ],+ [+ 13.2175,+ 28.4133+ ],+ [+ 13.4142,+ 28.5858+ ],+ [+ 13.5867,+ 28.7825+ ],+ [+ 13.7321,+ 29.0+ ],+ [+ 13.8478,+ 29.2346+ ],+ [+ 13.9319,+ 29.4824+ ],+ [+ 13.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 30.0+ ],+ [+ 19.9829,+ 30.2611+ ],+ [+ 19.9319,+ 30.5176+ ],+ [+ 19.8478,+ 30.7654+ ],+ [+ 19.7321,+ 31.0+ ],+ [+ 19.5867,+ 31.2175+ ],+ [+ 19.4142,+ 31.4142+ ],+ [+ 19.2175,+ 31.5867+ ],+ [+ 19.0,+ 31.7321+ ],+ [+ 18.7654,+ 31.8478+ ],+ [+ 18.5176,+ 31.9319+ ],+ [+ 18.2611,+ 31.9829+ ],+ [+ 18.0,+ 32.0+ ],+ [+ 17.7389,+ 31.9829+ ],+ [+ 17.4824,+ 31.9319+ ],+ [+ 17.2346,+ 31.8478+ ],+ [+ 17.0,+ 31.7321+ ],+ [+ 16.7825,+ 31.5867+ ],+ [+ 16.5858,+ 31.4142+ ],+ [+ 16.4133,+ 31.2175+ ],+ [+ 16.2679,+ 31.0+ ],+ [+ 16.1522,+ 30.7654+ ],+ [+ 16.0681,+ 30.5176+ ],+ [+ 16.0171,+ 30.2611+ ],+ [+ 16.0,+ 30.0+ ],+ [+ 16.0171,+ 29.7389+ ],+ [+ 16.0681,+ 29.4824+ ],+ [+ 16.1522,+ 29.2346+ ],+ [+ 16.2679,+ 29.0+ ],+ [+ 16.4133,+ 28.7825+ ],+ [+ 16.5858,+ 28.5858+ ],+ [+ 16.7825,+ 28.4133+ ],+ [+ 17.0,+ 28.2679+ ],+ [+ 17.2346,+ 28.1522+ ],+ [+ 17.4824,+ 28.0681+ ],+ [+ 17.7389,+ 28.0171+ ],+ [+ 18.0,+ 28.0+ ],+ [+ 18.2611,+ 28.0171+ ],+ [+ 18.5176,+ 28.0681+ ],+ [+ 18.7654,+ 28.1522+ ],+ [+ 19.0,+ 28.2679+ ],+ [+ 19.2175,+ 28.4133+ ],+ [+ 19.4142,+ 28.5858+ ],+ [+ 19.5867,+ 28.7825+ ],+ [+ 19.7321,+ 29.0+ ],+ [+ 19.8478,+ 29.2346+ ],+ [+ 19.9319,+ 29.4824+ ],+ [+ 19.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 26.0,+ 30.0+ ],+ [+ 25.9829,+ 30.2611+ ],+ [+ 25.9319,+ 30.5176+ ],+ [+ 25.8478,+ 30.7654+ ],+ [+ 25.7321,+ 31.0+ ],+ [+ 25.5867,+ 31.2175+ ],+ [+ 25.4142,+ 31.4142+ ],+ [+ 25.2175,+ 31.5867+ ],+ [+ 25.0,+ 31.7321+ ],+ [+ 24.7654,+ 31.8478+ ],+ [+ 24.5176,+ 31.9319+ ],+ [+ 24.2611,+ 31.9829+ ],+ [+ 24.0,+ 32.0+ ],+ [+ 23.7389,+ 31.9829+ ],+ [+ 23.4824,+ 31.9319+ ],+ [+ 23.2346,+ 31.8478+ ],+ [+ 23.0,+ 31.7321+ ],+ [+ 22.7825,+ 31.5867+ ],+ [+ 22.5858,+ 31.4142+ ],+ [+ 22.4133,+ 31.2175+ ],+ [+ 22.2679,+ 31.0+ ],+ [+ 22.1522,+ 30.7654+ ],+ [+ 22.0681,+ 30.5176+ ],+ [+ 22.0171,+ 30.2611+ ],+ [+ 22.0,+ 30.0+ ],+ [+ 22.0171,+ 29.7389+ ],+ [+ 22.0681,+ 29.4824+ ],+ [+ 22.1522,+ 29.2346+ ],+ [+ 22.2679,+ 29.0+ ],+ [+ 22.4133,+ 28.7825+ ],+ [+ 22.5858,+ 28.5858+ ],+ [+ 22.7825,+ 28.4133+ ],+ [+ 23.0,+ 28.2679+ ],+ [+ 23.2346,+ 28.1522+ ],+ [+ 23.4824,+ 28.0681+ ],+ [+ 23.7389,+ 28.0171+ ],+ [+ 24.0,+ 28.0+ ],+ [+ 24.2611,+ 28.0171+ ],+ [+ 24.5176,+ 28.0681+ ],+ [+ 24.7654,+ 28.1522+ ],+ [+ 25.0,+ 28.2679+ ],+ [+ 25.2175,+ 28.4133+ ],+ [+ 25.4142,+ 28.5858+ ],+ [+ 25.5867,+ 28.7825+ ],+ [+ 25.7321,+ 29.0+ ],+ [+ 25.8478,+ 29.2346+ ],+ [+ 25.9319,+ 29.4824+ ],+ [+ 25.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 32.0,+ 30.0+ ],+ [+ 31.9829,+ 30.2611+ ],+ [+ 31.9319,+ 30.5176+ ],+ [+ 31.8478,+ 30.7654+ ],+ [+ 31.7321,+ 31.0+ ],+ [+ 31.5867,+ 31.2175+ ],+ [+ 31.4142,+ 31.4142+ ],+ [+ 31.2175,+ 31.5867+ ],+ [+ 31.0,+ 31.7321+ ],+ [+ 30.7654,+ 31.8478+ ],+ [+ 30.5176,+ 31.9319+ ],+ [+ 30.2611,+ 31.9829+ ],+ [+ 30.0,+ 32.0+ ],+ [+ 29.7389,+ 31.9829+ ],+ [+ 29.4824,+ 31.9319+ ],+ [+ 29.2346,+ 31.8478+ ],+ [+ 29.0,+ 31.7321+ ],+ [+ 28.7825,+ 31.5867+ ],+ [+ 28.5858,+ 31.4142+ ],+ [+ 28.4133,+ 31.2175+ ],+ [+ 28.2679,+ 31.0+ ],+ [+ 28.1522,+ 30.7654+ ],+ [+ 28.0681,+ 30.5176+ ],+ [+ 28.0171,+ 30.2611+ ],+ [+ 28.0,+ 30.0+ ],+ [+ 28.0171,+ 29.7389+ ],+ [+ 28.0681,+ 29.4824+ ],+ [+ 28.1522,+ 29.2346+ ],+ [+ 28.2679,+ 29.0+ ],+ [+ 28.4133,+ 28.7825+ ],+ [+ 28.5858,+ 28.5858+ ],+ [+ 28.7825,+ 28.4133+ ],+ [+ 29.0,+ 28.2679+ ],+ [+ 29.2346,+ 28.1522+ ],+ [+ 29.4824,+ 28.0681+ ],+ [+ 29.7389,+ 28.0171+ ],+ [+ 30.0,+ 28.0+ ],+ [+ 30.2611,+ 28.0171+ ],+ [+ 30.5176,+ 28.0681+ ],+ [+ 30.7654,+ 28.1522+ ],+ [+ 31.0,+ 28.2679+ ],+ [+ 31.2175,+ 28.4133+ ],+ [+ 31.4142,+ 28.5858+ ],+ [+ 31.5867,+ 28.7825+ ],+ [+ 31.7321,+ 29.0+ ],+ [+ 31.8478,+ 29.2346+ ],+ [+ 31.9319,+ 29.4824+ ],+ [+ 31.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 38.0,+ 30.0+ ],+ [+ 37.9829,+ 30.2611+ ],+ [+ 37.9319,+ 30.5176+ ],+ [+ 37.8478,+ 30.7654+ ],+ [+ 37.7321,+ 31.0+ ],+ [+ 37.5867,+ 31.2175+ ],+ [+ 37.4142,+ 31.4142+ ],+ [+ 37.2175,+ 31.5867+ ],+ [+ 37.0,+ 31.7321+ ],+ [+ 36.7654,+ 31.8478+ ],+ [+ 36.5176,+ 31.9319+ ],+ [+ 36.2611,+ 31.9829+ ],+ [+ 36.0,+ 32.0+ ],+ [+ 35.7389,+ 31.9829+ ],+ [+ 35.4824,+ 31.9319+ ],+ [+ 35.2346,+ 31.8478+ ],+ [+ 35.0,+ 31.7321+ ],+ [+ 34.7825,+ 31.5867+ ],+ [+ 34.5858,+ 31.4142+ ],+ [+ 34.4133,+ 31.2175+ ],+ [+ 34.2679,+ 31.0+ ],+ [+ 34.1522,+ 30.7654+ ],+ [+ 34.0681,+ 30.5176+ ],+ [+ 34.0171,+ 30.2611+ ],+ [+ 34.0,+ 30.0+ ],+ [+ 34.0171,+ 29.7389+ ],+ [+ 34.0681,+ 29.4824+ ],+ [+ 34.1522,+ 29.2346+ ],+ [+ 34.2679,+ 29.0+ ],+ [+ 34.4133,+ 28.7825+ ],+ [+ 34.5858,+ 28.5858+ ],+ [+ 34.7825,+ 28.4133+ ],+ [+ 35.0,+ 28.2679+ ],+ [+ 35.2346,+ 28.1522+ ],+ [+ 35.4824,+ 28.0681+ ],+ [+ 35.7389,+ 28.0171+ ],+ [+ 36.0,+ 28.0+ ],+ [+ 36.2611,+ 28.0171+ ],+ [+ 36.5176,+ 28.0681+ ],+ [+ 36.7654,+ 28.1522+ ],+ [+ 37.0,+ 28.2679+ ],+ [+ 37.2175,+ 28.4133+ ],+ [+ 37.4142,+ 28.5858+ ],+ [+ 37.5867,+ 28.7825+ ],+ [+ 37.7321,+ 29.0+ ],+ [+ 37.8478,+ 29.2346+ ],+ [+ 37.9319,+ 29.4824+ ],+ [+ 37.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 44.0,+ 30.0+ ],+ [+ 43.9829,+ 30.2611+ ],+ [+ 43.9319,+ 30.5176+ ],+ [+ 43.8478,+ 30.7654+ ],+ [+ 43.7321,+ 31.0+ ],+ [+ 43.5867,+ 31.2175+ ],+ [+ 43.4142,+ 31.4142+ ],+ [+ 43.2175,+ 31.5867+ ],+ [+ 43.0,+ 31.7321+ ],+ [+ 42.7654,+ 31.8478+ ],+ [+ 42.5176,+ 31.9319+ ],+ [+ 42.2611,+ 31.9829+ ],+ [+ 42.0,+ 32.0+ ],+ [+ 41.7389,+ 31.9829+ ],+ [+ 41.4824,+ 31.9319+ ],+ [+ 41.2346,+ 31.8478+ ],+ [+ 41.0,+ 31.7321+ ],+ [+ 40.7825,+ 31.5867+ ],+ [+ 40.5858,+ 31.4142+ ],+ [+ 40.4133,+ 31.2175+ ],+ [+ 40.2679,+ 31.0+ ],+ [+ 40.1522,+ 30.7654+ ],+ [+ 40.0681,+ 30.5176+ ],+ [+ 40.0171,+ 30.2611+ ],+ [+ 40.0,+ 30.0+ ],+ [+ 40.0171,+ 29.7389+ ],+ [+ 40.0681,+ 29.4824+ ],+ [+ 40.1522,+ 29.2346+ ],+ [+ 40.2679,+ 29.0+ ],+ [+ 40.4133,+ 28.7825+ ],+ [+ 40.5858,+ 28.5858+ ],+ [+ 40.7825,+ 28.4133+ ],+ [+ 41.0,+ 28.2679+ ],+ [+ 41.2346,+ 28.1522+ ],+ [+ 41.4824,+ 28.0681+ ],+ [+ 41.7389,+ 28.0171+ ],+ [+ 42.0,+ 28.0+ ],+ [+ 42.2611,+ 28.0171+ ],+ [+ 42.5176,+ 28.0681+ ],+ [+ 42.7654,+ 28.1522+ ],+ [+ 43.0,+ 28.2679+ ],+ [+ 43.2175,+ 28.4133+ ],+ [+ 43.4142,+ 28.5858+ ],+ [+ 43.5867,+ 28.7825+ ],+ [+ 43.7321,+ 29.0+ ],+ [+ 43.8478,+ 29.2346+ ],+ [+ 43.9319,+ 29.4824+ ],+ [+ 43.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 50.0,+ 30.0+ ],+ [+ 49.9829,+ 30.2611+ ],+ [+ 49.9319,+ 30.5176+ ],+ [+ 49.8478,+ 30.7654+ ],+ [+ 49.7321,+ 31.0+ ],+ [+ 49.5867,+ 31.2175+ ],+ [+ 49.4142,+ 31.4142+ ],+ [+ 49.2175,+ 31.5867+ ],+ [+ 49.0,+ 31.7321+ ],+ [+ 48.7654,+ 31.8478+ ],+ [+ 48.5176,+ 31.9319+ ],+ [+ 48.2611,+ 31.9829+ ],+ [+ 48.0,+ 32.0+ ],+ [+ 47.7389,+ 31.9829+ ],+ [+ 47.4824,+ 31.9319+ ],+ [+ 47.2346,+ 31.8478+ ],+ [+ 47.0,+ 31.7321+ ],+ [+ 46.7825,+ 31.5867+ ],+ [+ 46.5858,+ 31.4142+ ],+ [+ 46.4133,+ 31.2175+ ],+ [+ 46.2679,+ 31.0+ ],+ [+ 46.1522,+ 30.7654+ ],+ [+ 46.0681,+ 30.5176+ ],+ [+ 46.0171,+ 30.2611+ ],+ [+ 46.0,+ 30.0+ ],+ [+ 46.0171,+ 29.7389+ ],+ [+ 46.0681,+ 29.4824+ ],+ [+ 46.1522,+ 29.2346+ ],+ [+ 46.2679,+ 29.0+ ],+ [+ 46.4133,+ 28.7825+ ],+ [+ 46.5858,+ 28.5858+ ],+ [+ 46.7825,+ 28.4133+ ],+ [+ 47.0,+ 28.2679+ ],+ [+ 47.2346,+ 28.1522+ ],+ [+ 47.4824,+ 28.0681+ ],+ [+ 47.7389,+ 28.0171+ ],+ [+ 48.0,+ 28.0+ ],+ [+ 48.2611,+ 28.0171+ ],+ [+ 48.5176,+ 28.0681+ ],+ [+ 48.7654,+ 28.1522+ ],+ [+ 49.0,+ 28.2679+ ],+ [+ 49.2175,+ 28.4133+ ],+ [+ 49.4142,+ 28.5858+ ],+ [+ 49.5867,+ 28.7825+ ],+ [+ 49.7321,+ 29.0+ ],+ [+ 49.8478,+ 29.2346+ ],+ [+ 49.9319,+ 29.4824+ ],+ [+ 49.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 56.0,+ 30.0+ ],+ [+ 55.9829,+ 30.2611+ ],+ [+ 55.9319,+ 30.5176+ ],+ [+ 55.8478,+ 30.7654+ ],+ [+ 55.7321,+ 31.0+ ],+ [+ 55.5867,+ 31.2175+ ],+ [+ 55.4142,+ 31.4142+ ],+ [+ 55.2175,+ 31.5867+ ],+ [+ 55.0,+ 31.7321+ ],+ [+ 54.7654,+ 31.8478+ ],+ [+ 54.5176,+ 31.9319+ ],+ [+ 54.2611,+ 31.9829+ ],+ [+ 54.0,+ 32.0+ ],+ [+ 53.7389,+ 31.9829+ ],+ [+ 53.4824,+ 31.9319+ ],+ [+ 53.2346,+ 31.8478+ ],+ [+ 53.0,+ 31.7321+ ],+ [+ 52.7825,+ 31.5867+ ],+ [+ 52.5858,+ 31.4142+ ],+ [+ 52.4133,+ 31.2175+ ],+ [+ 52.2679,+ 31.0+ ],+ [+ 52.1522,+ 30.7654+ ],+ [+ 52.0681,+ 30.5176+ ],+ [+ 52.0171,+ 30.2611+ ],+ [+ 52.0,+ 30.0+ ],+ [+ 52.0171,+ 29.7389+ ],+ [+ 52.0681,+ 29.4824+ ],+ [+ 52.1522,+ 29.2346+ ],+ [+ 52.2679,+ 29.0+ ],+ [+ 52.4133,+ 28.7825+ ],+ [+ 52.5858,+ 28.5858+ ],+ [+ 52.7825,+ 28.4133+ ],+ [+ 53.0,+ 28.2679+ ],+ [+ 53.2346,+ 28.1522+ ],+ [+ 53.4824,+ 28.0681+ ],+ [+ 53.7389,+ 28.0171+ ],+ [+ 54.0,+ 28.0+ ],+ [+ 54.2611,+ 28.0171+ ],+ [+ 54.5176,+ 28.0681+ ],+ [+ 54.7654,+ 28.1522+ ],+ [+ 55.0,+ 28.2679+ ],+ [+ 55.2175,+ 28.4133+ ],+ [+ 55.4142,+ 28.5858+ ],+ [+ 55.5867,+ 28.7825+ ],+ [+ 55.7321,+ 29.0+ ],+ [+ 55.8478,+ 29.2346+ ],+ [+ 55.9319,+ 29.4824+ ],+ [+ 55.9829,+ 29.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 2.0,+ 36.0+ ],+ [+ 1.9829,+ 36.2611+ ],+ [+ 1.9319,+ 36.5176+ ],+ [+ 1.8478,+ 36.7654+ ],+ [+ 1.7321,+ 37.0+ ],+ [+ 1.5867,+ 37.2175+ ],+ [+ 1.4142,+ 37.4142+ ],+ [+ 1.2175,+ 37.5867+ ],+ [+ 1.0,+ 37.7321+ ],+ [+ 0.7654,+ 37.8478+ ],+ [+ 0.5176,+ 37.9319+ ],+ [+ 0.2611,+ 37.9829+ ],+ [+ 0.0,+ 38.0+ ],+ [+ -0.2611,+ 37.9829+ ],+ [+ -0.5176,+ 37.9319+ ],+ [+ -0.7654,+ 37.8478+ ],+ [+ -1.0,+ 37.7321+ ],+ [+ -1.2175,+ 37.5867+ ],+ [+ -1.4142,+ 37.4142+ ],+ [+ -1.5867,+ 37.2175+ ],+ [+ -1.7321,+ 37.0+ ],+ [+ -1.8478,+ 36.7654+ ],+ [+ -1.9319,+ 36.5176+ ],+ [+ -1.9829,+ 36.2611+ ],+ [+ -2.0,+ 36.0+ ],+ [+ -1.9829,+ 35.7389+ ],+ [+ -1.9319,+ 35.4824+ ],+ [+ -1.8478,+ 35.2346+ ],+ [+ -1.7321,+ 35.0+ ],+ [+ -1.5867,+ 34.7825+ ],+ [+ -1.4142,+ 34.5858+ ],+ [+ -1.2175,+ 34.4133+ ],+ [+ -1.0,+ 34.2679+ ],+ [+ -0.7654,+ 34.1522+ ],+ [+ -0.5176,+ 34.0681+ ],+ [+ -0.2611,+ 34.0171+ ],+ [+ -0.0,+ 34.0+ ],+ [+ 0.2611,+ 34.0171+ ],+ [+ 0.5176,+ 34.0681+ ],+ [+ 0.7654,+ 34.1522+ ],+ [+ 1.0,+ 34.2679+ ],+ [+ 1.2175,+ 34.4133+ ],+ [+ 1.4142,+ 34.5858+ ],+ [+ 1.5867,+ 34.7825+ ],+ [+ 1.7321,+ 35.0+ ],+ [+ 1.8478,+ 35.2346+ ],+ [+ 1.9319,+ 35.4824+ ],+ [+ 1.9829,+ 35.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 8.0,+ 36.0+ ],+ [+ 7.9829,+ 36.2611+ ],+ [+ 7.9319,+ 36.5176+ ],+ [+ 7.8478,+ 36.7654+ ],+ [+ 7.7321,+ 37.0+ ],+ [+ 7.5867,+ 37.2175+ ],+ [+ 7.4142,+ 37.4142+ ],+ [+ 7.2175,+ 37.5867+ ],+ [+ 7.0,+ 37.7321+ ],+ [+ 6.7654,+ 37.8478+ ],+ [+ 6.5176,+ 37.9319+ ],+ [+ 6.2611,+ 37.9829+ ],+ [+ 6.0,+ 38.0+ ],+ [+ 5.7389,+ 37.9829+ ],+ [+ 5.4824,+ 37.9319+ ],+ [+ 5.2346,+ 37.8478+ ],+ [+ 5.0,+ 37.7321+ ],+ [+ 4.7825,+ 37.5867+ ],+ [+ 4.5858,+ 37.4142+ ],+ [+ 4.4133,+ 37.2175+ ],+ [+ 4.2679,+ 37.0+ ],+ [+ 4.1522,+ 36.7654+ ],+ [+ 4.0681,+ 36.5176+ ],+ [+ 4.0171,+ 36.2611+ ],+ [+ 4.0,+ 36.0+ ],+ [+ 4.0171,+ 35.7389+ ],+ [+ 4.0681,+ 35.4824+ ],+ [+ 4.1522,+ 35.2346+ ],+ [+ 4.2679,+ 35.0+ ],+ [+ 4.4133,+ 34.7825+ ],+ [+ 4.5858,+ 34.5858+ ],+ [+ 4.7825,+ 34.4133+ ],+ [+ 5.0,+ 34.2679+ ],+ [+ 5.2346,+ 34.1522+ ],+ [+ 5.4824,+ 34.0681+ ],+ [+ 5.7389,+ 34.0171+ ],+ [+ 6.0,+ 34.0+ ],+ [+ 6.2611,+ 34.0171+ ],+ [+ 6.5176,+ 34.0681+ ],+ [+ 6.7654,+ 34.1522+ ],+ [+ 7.0,+ 34.2679+ ],+ [+ 7.2175,+ 34.4133+ ],+ [+ 7.4142,+ 34.5858+ ],+ [+ 7.5867,+ 34.7825+ ],+ [+ 7.7321,+ 35.0+ ],+ [+ 7.8478,+ 35.2346+ ],+ [+ 7.9319,+ 35.4824+ ],+ [+ 7.9829,+ 35.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 14.0,+ 36.0+ ],+ [+ 13.9829,+ 36.2611+ ],+ [+ 13.9319,+ 36.5176+ ],+ [+ 13.8478,+ 36.7654+ ],+ [+ 13.7321,+ 37.0+ ],+ [+ 13.5867,+ 37.2175+ ],+ [+ 13.4142,+ 37.4142+ ],+ [+ 13.2175,+ 37.5867+ ],+ [+ 13.0,+ 37.7321+ ],+ [+ 12.7654,+ 37.8478+ ],+ [+ 12.5176,+ 37.9319+ ],+ [+ 12.2611,+ 37.9829+ ],+ [+ 12.0,+ 38.0+ ],+ [+ 11.7389,+ 37.9829+ ],+ [+ 11.4824,+ 37.9319+ ],+ [+ 11.2346,+ 37.8478+ ],+ [+ 11.0,+ 37.7321+ ],+ [+ 10.7825,+ 37.5867+ ],+ [+ 10.5858,+ 37.4142+ ],+ [+ 10.4133,+ 37.2175+ ],+ [+ 10.2679,+ 37.0+ ],+ [+ 10.1522,+ 36.7654+ ],+ [+ 10.0681,+ 36.5176+ ],+ [+ 10.0171,+ 36.2611+ ],+ [+ 10.0,+ 36.0+ ],+ [+ 10.0171,+ 35.7389+ ],+ [+ 10.0681,+ 35.4824+ ],+ [+ 10.1522,+ 35.2346+ ],+ [+ 10.2679,+ 35.0+ ],+ [+ 10.4133,+ 34.7825+ ],+ [+ 10.5858,+ 34.5858+ ],+ [+ 10.7825,+ 34.4133+ ],+ [+ 11.0,+ 34.2679+ ],+ [+ 11.2346,+ 34.1522+ ],+ [+ 11.4824,+ 34.0681+ ],+ [+ 11.7389,+ 34.0171+ ],+ [+ 12.0,+ 34.0+ ],+ [+ 12.2611,+ 34.0171+ ],+ [+ 12.5176,+ 34.0681+ ],+ [+ 12.7654,+ 34.1522+ ],+ [+ 13.0,+ 34.2679+ ],+ [+ 13.2175,+ 34.4133+ ],+ [+ 13.4142,+ 34.5858+ ],+ [+ 13.5867,+ 34.7825+ ],+ [+ 13.7321,+ 35.0+ ],+ [+ 13.8478,+ 35.2346+ ],+ [+ 13.9319,+ 35.4824+ ],+ [+ 13.9829,+ 35.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 20.0,+ 36.0+ ],+ [+ 19.9829,+ 36.2611+ ],+ [+ 19.9319,+ 36.5176+ ],+ [+ 19.8478,+ 36.7654+ ],+ [+ 19.7321,+ 37.0+ ],+ [+ 19.5867,+ 37.2175+ ],+ [+ 19.4142,+ 37.4142+ ],+ [+ 19.2175,+ 37.5867+ ],+ [+ 19.0,+ 37.7321+ ],+ [+ 18.7654,+ 37.8478+ ],+ [+ 18.5176,+ 37.9319+ ],+ [+ 18.2611,+ 37.9829+ ],+ [+ 18.0,+ 38.0+ ],+ [+ 17.7389,+ 37.9829+ ],+ [+ 17.4824,+ 37.9319+ ],+ [+ 17.2346,+ 37.8478+ ],+ [+ 17.0,+ 37.7321+ ],+ [+ 16.7825,+ 37.5867+ ],+ [+ 16.5858,+ 37.4142+ ],+ [+ 16.4133,+ 37.2175+ ],+ [+ 16.2679,+ 37.0+ ],+ [+ 16.1522,+ 36.7654+ ],+ [+ 16.0681,+ 36.5176+ ],+ [+ 16.0171,+ 36.2611+ ],+ [+ 16.0,+ 36.0+ ],+ [+ 16.0171,+ 35.7389+ ],+ [+ 16.0681,+ 35.4824+ ],+ [+ 16.1522,+ 35.2346+ ],+ [+ 16.2679,+ 35.0+ ],+ [+ 16.4133,+ 34.7825+ ],+ [+ 16.5858,+ 34.5858+ ],+ [+ 16.7825,+ 34.4133+ ],+ [+ 17.0,+ 34.2679+ ],+ [+ 17.2346,+ 34.1522+ ],+ [+ 17.4824,+ 34.0681+ ],+ [+ 17.7389,+ 34.0171+ ],+ [+ 18.0,+ 34.0+ ],+ [+ 18.2611,+ 34.0171+ ],+ [+ 18.5176,+ 34.0681+ ],+ [+ 18.7654,+ 34.1522+ ],+ [+ 19.0,+ 34.2679+ ],+ [+ 19.2175,+ 34.4133+ ],+ [+ 19.4142,+ 34.5858+ ],+ [+ 19.5867,+ 34.7825+ ],+ [+ 19.7321,+ 35.0+ ],+ [+ 19.8478,+ 35.2346+ ],+ [+ 19.9319,+ 35.4824+ ],+ [+ 19.9829,+ 35.7389+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 1,+ "profiles": "all",+ "operation": "new",+ "body_name": "Peg"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Peg",+ "tools": [+ "Peg (2)",+ "Peg (3)",+ "Peg (4)",+ "Peg (5)",+ "Peg (6)",+ "Peg (7)",+ "Peg (8)",+ "Peg (9)",+ "Peg (10)",+ "Peg (11)",+ "Peg (12)",+ "Peg (13)",+ "Peg (14)",+ "Peg (15)",+ "Peg (16)",+ "Peg (17)",+ "Peg (18)",+ "Peg (19)",+ "Peg (20)",+ "Peg (21)",+ "Peg (22)",+ "Peg (23)",+ "Peg (24)",+ "Peg (25)",+ "Peg (26)",+ "Peg (27)",+ "Peg (28)",+ "Peg (29)",+ "Peg (30)",+ "Peg (31)",+ "Peg (32)",+ "Peg (33)",+ "Peg (34)",+ "Peg (35)",+ "Peg (36)",+ "Peg (37)",+ "Peg (38)",+ "Peg (39)",+ "Peg (40)",+ "Peg (41)",+ "Peg (42)",+ "Peg (43)",+ "Peg (44)",+ "Peg (45)",+ "Peg (46)",+ "Peg (47)",+ "Peg (48)",+ "Peg (49)",+ "Peg (50)",+ "Peg (51)",+ "Peg (52)",+ "Peg (53)",+ "Peg (54)",+ "Peg (55)",+ "Peg (56)",+ "Peg (57)",+ "Peg (58)",+ "Peg (59)",+ "Peg (60)",+ "Peg (61)",+ "Peg (62)",+ "Peg (63)",+ "Peg (64)"+ ],+ "operation": "join"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.json b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.jsonnew file mode 100644index 0000000000..165143d57f--- /dev/null+++ b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3456",+ "tangency-labs/solidcraft#3497"+ ],+ "what": "a deep cut that removes everything above z=2 of a tapered body with nine through-bores, leaving the 2 mm drilled base",+ "source": "analytic",+ "method": "cone frustum r=30 at z=0 to r=20 at z=100 (a tapered extrude, narrowing by atan(0.1)=5.7106 deg) (r(z)=30-0.1z) with nine r=1.5 bores (centre + eight on r=10). Removing z>2 leaves the slab z 0..2: frustum slice pi*2/3*(30^2+30*29.8+29.8^2) minus 9*pi*1.5^2*2. Faces: base, top, cone side, nine bore walls = 12",+ "body_count": 1,+ "volume_mm3": 5490.0169,+ "faces": 12+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.json b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.jsonnew file mode 100644index 0000000000..b350a9e68a--- /dev/null+++ b/tests/kernel-cases/booleans/3456-deep-cut-through-drilled-taper-leaves-base/recipe.json@@ -0,0 +1,210 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 30+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 100,+ "taper": "-5.710593137 deg",+ "operation": "new",+ "body_name": "Taper"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ 0,+ 0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ 10.0,+ 0.0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ 7.071068,+ 7.071068,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ 0.0,+ 10.0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ -7.071068,+ 7.071068,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ -10.0,+ 0.0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ -7.071068,+ -7.071068,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ -0.0,+ -10.0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 1.5,+ "height": 102,+ "base": [+ 7.071068,+ -7.071068,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -50,+ -50,+ 2+ ],+ "length": 100,+ "width": 100,+ "height": 98,+ "operation": "cut",+ "targets": [+ "Taper"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.json b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.jsonnew file mode 100644index 0000000000..ec28a75855--- /dev/null+++ b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/expected.json@@ -0,0 +1,13 @@+{+ "sources": [+ "tangency-labs/solidcraft#3460"+ ],+ "what": "Combine cut (keep tools) of an enclosure by its lid whose insert is flush with the inner walls and carries four small half-moon tabs that cross them; the cut must not return the target unchanged",+ "source": "analytic",+ "method": "enclosure 40x30x20 minus cavity 36x26x18 = 7152; lid insert 36x26x8 flush with the cavity walls and top, plus four vertical cylinders r=2.5, 6 tall, centred 2 mm inside each wall so each pokes 0.5 mm into the wall: overlap per tab is a circular segment (chord 3, sagitta 0.5) of area 2.5^2*acos(0.8) - 2*1.5 = 1.0219, times 6. The cut moves 4*6*1.0219 = 24.5 mm3 from the enclosure into nothing and the lid is kept, so the two bodies together hold 7152 + 36*26*8 + 24.5 - 24.5 = 14640 (an unchanged target would total 14664.5). Graded with rel 5e-4 so a no-op cut is caught; body_count 2",+ "body_count": 2,+ "volume_mm3": 14640.0,+ "tolerance": {+ "rel": 0.0005+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.json b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.jsonnew file mode 100644index 0000000000..6dcb45d946--- /dev/null+++ b/tests/kernel-cases/booleans/3460-cut-by-lid-with-coincident-walls-and-half-moon-tabs/recipe.json@@ -0,0 +1,124 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 40,+ "width": 30,+ "height": 20,+ "body_name": "Enc"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 2,+ 2,+ 2+ ],+ "length": 36,+ "width": 26,+ "height": 18,+ "operation": "cut",+ "targets": [+ "Enc"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 2,+ 2,+ 12+ ],+ "length": 36,+ "width": 26,+ "height": 8,+ "body_name": "Lid"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2.5,+ "height": 6,+ "base": [+ 4,+ 15,+ 13+ ],+ "operation": "join",+ "targets": [+ "Lid"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2.5,+ "height": 6,+ "base": [+ 36,+ 15,+ 13+ ],+ "operation": "join",+ "targets": [+ "Lid"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2.5,+ "height": 6,+ "base": [+ 20,+ 4,+ 13+ ],+ "operation": "join",+ "targets": [+ "Lid"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2.5,+ "height": 6,+ "base": [+ 20,+ 26,+ 13+ ],+ "operation": "join",+ "targets": [+ "Lid"+ ]+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Enc",+ "tools": [+ "Lid"+ ],+ "operation": "cut",+ "keep_tools": true+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.json b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.jsonnew file mode 100644index 0000000000..3ab0017d36--- /dev/null+++ b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3485",+ "tangency-labs/solidcraft#3062"+ ],+ "what": "a boss joined on a rod's top face (the join runs the boss on into the rod); the rod's side must stay one face, not seamed at the boss's foot",+ "source": "analytic",+ "method": "rod r=7, h=48.2 plus boss r=2.7 standing 2 mm above the top: V = pi*(7^2*48.2 + 2.7^2*2). Faces: rod bottom, rod side, rod top ring, boss side, boss top = 5 (the rod's side has no seam at the boss's foot)",+ "body_count": 1,+ "volume_mm3": 7465.618,+ "faces": 5+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.json b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.jsonnew file mode 100644index 0000000000..b69ad72f04--- /dev/null+++ b/tests/kernel-cases/booleans/3485-boss-joined-on-rod-top-keeps-side-whole/recipe.json@@ -0,0 +1,58 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 7,+ "height": 48.2,+ "body_name": "Rod"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 48.2+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 2.7+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 2,+ "operation": "join",+ "targets": [+ "Rod"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.json b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.jsonnew file mode 100644index 0000000000..c3b8194cfb--- /dev/null+++ b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3497",+ "tangency-labs/solidcraft#3456"+ ],+ "what": "intersection of two collinear R2 H12 cylinders offset by 0.75 along the axis (curved walls coincide over part of the height)",+ "source": "analytic",+ "method": "common part is the cylinder r=2 from z=0.75 to 12, height 11.25: V = pi*4*11.25 = 45 pi. Faces: 2 caps + 1 side = 3",+ "body_count": 1,+ "volume_mm3": 141.3717,+ "faces": 3+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.json b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.jsonnew file mode 100644index 0000000000..43c1295084--- /dev/null+++ b/tests/kernel-cases/booleans/3497-collinear-cylinders-partial-height-intersection/recipe.json@@ -0,0 +1,35 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2,+ "height": 12,+ "body_name": "A"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 2,+ "height": 12,+ "base": [+ 0,+ 0,+ 0.75+ ],+ "body_name": "B"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "A",+ "tools": [+ "B"+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.json b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.jsonnew file mode 100644index 0000000000..df3c017f5b--- /dev/null+++ b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3497",+ "tangency-labs/solidcraft#3456"+ ],+ "what": "a pin r=3.02 intersected with a tube whose bore is r=3: a thin annulus (0.02 mm overlap on a curved wall)",+ "source": "analytic",+ "method": "overlap is the annulus r 3..3.02, h=6: V = pi*(3.02^2 - 3^2)*6 = 2.2695 (the PR quotes 2.269486533). Faces: 2 rings + inner + outer wall = 4",+ "body_count": 1,+ "volume_mm3": 2.269487,+ "faces": 4+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.json b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.jsonnew file mode 100644index 0000000000..60bd4f94b0--- /dev/null+++ b/tests/kernel-cases/booleans/3497-pin-overlapping-bore-by-20-microns/recipe.json@@ -0,0 +1,48 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 6,+ "height": 6,+ "body_name": "Tube"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 3,+ "height": 6,+ "body_name": "Bore"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Tube",+ "tools": [+ "Bore"+ ],+ "operation": "cut"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 3.02,+ "height": 6,+ "body_name": "Pin"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Tube",+ "tools": [+ "Pin"+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.json b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.jsonnew file mode 100644index 0000000000..94d7b27036--- /dev/null+++ b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#3526",+ "tangency-labs/solidcraft#3888"+ ],+ "what": "intersect of a two-lump target (two spheres joined while apart) with a box holding the bottom half of each",+ "source": "analytic",+ "method": "box x -10..40, y -10..10, z -10..0 holds the z<=0 half of each r=4 sphere (centres (0,0,0), (30,0,0)): V = 2 * (2/3) pi 4^3 = 268.083. The body must not be removed. valid is false only because the one body holds two separate shells, which the rig's one-shell check does not allow",+ "body_count": 1,+ "volume_mm3": 268.0826,+ "valid": false+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.json b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.jsonnew file mode 100644index 0000000000..cd071542d9--- /dev/null+++ b/tests/kernel-cases/booleans/3526-intersect-keeps-every-lump/recipe.json@@ -0,0 +1,57 @@+{+ "commands": [+ {+ "command": "solid.sphere",+ "params": {+ "radius": 4,+ "center": [+ 0,+ 0,+ 0+ ],+ "operation": "new",+ "body_name": "Balls"+ }+ },+ {+ "command": "solid.sphere",+ "params": {+ "radius": 4,+ "center": [+ 30,+ 0,+ 0+ ],+ "operation": "join",+ "targets": [+ "Balls"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 50,+ "width": 20,+ "height": 10,+ "corner": [+ -10,+ -10,+ -10+ ],+ "operation": "new",+ "body_name": "Box"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Balls",+ "tools": [+ "Box"+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.json b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.jsonnew file mode 100644index 0000000000..1113b7546b--- /dev/null+++ b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3604",+ "tangency-labs/solidcraft#3613"+ ],+ "what": "cut of a box by a swept G2 corner-removal tool along a projected edge chain (left-rear corner; the symmetric front-left chain works)",+ "source": "invariants",+ "method": "no closed form for the free-form tool: the tool lies on the box's bottom edge and overlaps it, so the cut must succeed with one valid closed solid (the tool is consumed). No volume is graded",+ "body_count": 1+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.json b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.jsonnew file mode 100644index 0000000000..54d7a532cc--- /dev/null+++ b/tests/kernel-cases/booleans/3604-cut-with-g2-swept-tool-along-projected-edge/recipe.json@@ -0,0 +1,198 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 40,+ "width": 20,+ "height": 10,+ "operation": "new",+ "body_name": "B"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "body": "B",+ "edges": [+ [+ 0,+ 0,+ 5+ ],+ [+ 40,+ 0,+ 5+ ],+ [+ 40,+ 20,+ 5+ ],+ [+ 0,+ 20,+ 5+ ]+ ],+ "radius": 5,+ "type": "g2"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "face": [+ 20,+ 10,+ 0+ ]+ },+ "project_edges": true,+ "name": "Bottom"+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 15,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "RB"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -0.2,+ -0.2+ ],+ [+ 0.8,+ -0.2+ ]+ ],+ "ids": [+ "o1"+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0.8,+ -0.2+ ],+ [+ 0.8,+ 0+ ]+ ],+ "ids": [+ "o2"+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 0.8+ ],+ [+ -0.2,+ 0.8+ ]+ ],+ "ids": [+ "o3"+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -0.2,+ 0.8+ ],+ [+ -0.2,+ -0.2+ ]+ ],+ "ids": [+ "o4"+ ]+ }+ },+ {+ "command": "sketch.blend_curve",+ "params": {+ "a": "o2.end",+ "b": "o3.start",+ "continuity": "g2"+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.sweep",+ "params": {+ "sketch": "RB",+ "path_sketch": "Bottom",+ "path": [+ "s2",+ "l3"+ ],+ "orientation": "perpendicular",+ "operation": "new",+ "body_name": "Tool"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "B",+ "tools": [+ "Tool"+ ],+ "operation": "cut"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.json b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.jsonnew file mode 100644index 0000000000..3edaa04a8f--- /dev/null+++ b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3612",+ "tangency-labs/solidcraft#3379"+ ],+ "what": "a spoke whose inner face x=12 is exactly tangent to the hub cylinder r=12 (line contact), joined to the rim, patterned 5 times around the hub's axis",+ "source": "analytic",+ "method": "rim r63..66 h3: pi(66^2-63^2)*3; hub r12 h3: pi*144*3; each spoke (x 12..64, y 0.5..2.5, z +-1.25) adds the part outside hub and rim: 2*(integral over z=-1.25..1.25 of sqrt(63^2-z^2) - 12) = 254.979 (the spoke's foot lies inside the rim; at z=+-1.25 the hub reaches x=11.93 so it never overlaps the spoke). Spokes are 72 deg apart and do not overlap: V = 5004.557 + 5*254.979 = 6279.454",+ "volume_mm3": 6279.4538+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.json b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.jsonnew file mode 100644index 0000000000..4b2a905238--- /dev/null+++ b/tests/kernel-cases/booleans/3612-circular-pattern-of-spoke-tangent-to-hub/recipe.json@@ -0,0 +1,65 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 66,+ "height": 3,+ "axis": "Y",+ "body_name": "Wheel"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 63,+ "height": 3,+ "axis": "Y",+ "operation": "cut",+ "targets": [+ "Wheel"+ ]+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 12,+ "height": 3,+ "axis": "Y",+ "operation": "join",+ "targets": [+ "Wheel"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 12,+ 0.5,+ -1.25+ ],+ "length": 52,+ "width": 2,+ "height": 2.5,+ "operation": "join",+ "targets": [+ "Wheel"+ ]+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "features": [+ "Box1"+ ],+ "axis": "Y",+ "count": 5,+ "angle": "360 deg"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.json b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.jsonnew file mode 100644index 0000000000..ba94c6f0d7--- /dev/null+++ b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/expected.json@@ -0,0 +1,14 @@+{+ "sources": [+ "tangency-labs/solidcraft#3633",+ "tangency-labs/solidcraft#3682"+ ],+ "what": "a sphere r=10 intersected with a square pyramid whose apex is the sphere's centre and whose sides lie in the planes of the sphere primitive's patch edges",+ "source": "analytic",+ "method": "the pyramid has apex (0,0,0) and base 20x20 at x=-10 (corners (-10,+-10,+-10)): a cone over a cube face, a sixth of all directions, and the base is tangent to the sphere at (-10,0,0). The intersection is a sixth of the ball: V = (4/3) pi 10^3 / 6 = 698.132. Faces: 4 planar sides + 1 spherical = 5; edges 4 radial + 4 arcs = 8; vertices: apex + 4 corners on the sphere = 5",+ "body_count": 1,+ "volume_mm3": 698.1317,+ "faces": 5,+ "edges": 8,+ "vertices": 5+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.json b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.jsonnew file mode 100644index 0000000000..1c73fa2b28--- /dev/null+++ b/tests/kernel-cases/booleans/3633-sphere-intersect-pyramid-apex-at-centre/recipe.json@@ -0,0 +1,113 @@+{+ "commands": [+ {+ "command": "solid.sphere",+ "params": {+ "radius": 10,+ "body_name": "Ball"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ -10,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -10,+ -10+ ],+ "p1": [+ 10,+ 10+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 0,+ 1,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Apex"+ }+ },+ {+ "command": "sketch.point",+ "params": {+ "point": [+ 0,+ 0+ ],+ "id": "apex"+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.loft",+ "params": {+ "sections": [+ {+ "sketch": "Base"+ },+ {+ "sketch": "Apex",+ "point": "apex"+ }+ ],+ "body_name": "Pyramid"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Ball",+ "tools": [+ "Pyramid"+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.json b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.jsonnew file mode 100644index 0000000000..9a79e4f06f--- /dev/null+++ b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3652"+ ],+ "what": "mirror a Mirror feature (the first mirror's hole) about a second plane: 'Mirror1 cannot be patterned or mirrored yet'",+ "source": "analytic",+ "method": "plate 100x60x10 with a through hole r=3 at (20,10). Mirror1 (about YZ) adds the hole at (-20,10); mirroring Mirror1 about XZ reflects the hole it made to (-20,-10). Three holes, no overlaps: V = 60000 - 3*pi*9*10 = 59151.77",+ "body_count": 1,+ "volume_mm3": 59151.77+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.json b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.jsonnew file mode 100644index 0000000000..38ec95cac3--- /dev/null+++ b/tests/kernel-cases/booleans/3652-mirror-of-a-mirror-feature/recipe.json@@ -0,0 +1,83 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -50,+ -30,+ 0+ ],+ "length": 100,+ "width": 60,+ "height": 10,+ "body_name": "Plate"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 10+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 20,+ 10+ ],+ "radius": 3+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "direction": "negative",+ "operation": "cut",+ "targets": [+ "Plate"+ ]+ }+ },+ {+ "command": "solid.mirror",+ "params": {+ "features": [+ "Extrude1"+ ],+ "plane": "YZ"+ }+ },+ {+ "command": "solid.mirror",+ "params": {+ "features": [+ "Mirror1"+ ],+ "plane": "XZ"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.json b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.jsonnew file mode 100644index 0000000000..7d62e4e2fc--- /dev/null+++ b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3665",+ "tangency-labs/solidcraft#3666"+ ],+ "what": "a join extrude of a column standing on a channel's flat floor and lying along both its curved walls (column circle tangent to both walls)",+ "source": "analytic",+ "method": "housing 60x60x20 = 72000 minus the annular channel r16..24, 10 deep: pi(24^2-16^2)*10; the column r=4 centred on the channel's mid circle (r=20) is tangent to both walls and stands 6 mm on the floor: + pi*16*6. V = 72000 - 3200pi + 96pi",+ "body_count": 1,+ "volume_mm3": 62248.4964+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.json b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.jsonnew file mode 100644index 0000000000..9609c813aa--- /dev/null+++ b/tests/kernel-cases/booleans/3665-join-extrude-column-on-floor-and-curved-walls/recipe.json@@ -0,0 +1,129 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -30,+ -30,+ 0+ ],+ "length": 60,+ "width": 60,+ "height": 20,+ "body_name": "Housing"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 20+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 24+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 16+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "profiles": [+ {+ "point": [+ 20,+ 0+ ]+ }+ ],+ "distance": 10,+ "direction": "negative",+ "operation": "cut",+ "targets": [+ "Housing"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 10+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 20,+ 0+ ],+ "radius": 4+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 6,+ "operation": "join",+ "targets": [+ "Housing"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.json b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.jsonnew file mode 100644index 0000000000..58a19b18b8--- /dev/null+++ b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3671"+ ],+ "what": "intersect with a tapered pocket tool whose top face lies in the block's top face, 0.5 mm short of a rib",+ "source": "analytic",+ "method": "the tool lies wholly inside the block (z 5..20, x 40..89.5, y 30..70), so the intersection is the tool: a frustum of a rectangle 49.5x40 at the top, sides leaning in 30 deg over 15 mm (inset d=15*tan30=8.660 per side); prismatoid V = h/3 (A1 + A2 + sqrt(A1 A2)). The PR quotes 19573.6090 for its own numbers; 30 deg exactly gives this value (within 1e-3 of it). Nothing may stay above z=20 (the rib is not part of the tool)",+ "body_count": 1,+ "volume_mm3": 19559.5484,+ "bbox": {+ "min": [+ 40,+ 30,+ 5+ ],+ "max": [+ 89.5,+ 70,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.json b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.jsonnew file mode 100644index 0000000000..233fc1d98a--- /dev/null+++ b/tests/kernel-cases/booleans/3671-intersect-tool-in-top-face-beside-rib/recipe.json@@ -0,0 +1,93 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 200,+ "width": 100,+ "height": 20,+ "body_name": "Block"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 90,+ 0,+ 20+ ],+ "length": 20,+ "width": 100,+ "height": 10,+ "operation": "join",+ "targets": [+ "Block"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 5+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 48.66025403784438,+ 38.66025403784438+ ],+ "p1": [+ 80.83974596215562,+ 61.33974596215562+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 15,+ "taper": "30 deg",+ "operation": "new",+ "body_name": "Tool"+ }+ },+ {+ "command": "solid.combine",+ "params": {+ "target": "Block",+ "tools": [+ "Tool"+ ],+ "operation": "intersect"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.json b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.jsonnew file mode 100644index 0000000000..456b70894d--- /dev/null+++ b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3703"+ ],+ "what": "two joined face extrudes on one box (top face, then the right side face): the stepped shape must stay",+ "source": "analytic",+ "method": "box 25x20x35 = 17500; top face pulled up 10: +25*20*10 = 5000; the right face x=25 is then one planar face 20 wide and 45 tall (box side merged with the new block's side) and is pulled out 10: +20*45*10 = 9000. V = 31500, bbox x 0..35, z 0..45. (Assumes coplanar faces merge, as the README's face counts do.)",+ "body_count": 1,+ "volume_mm3": 31500.0,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 35,+ 20,+ 45+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.json b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.jsonnew file mode 100644index 0000000000..b221dd3087--- /dev/null+++ b/tests/kernel-cases/booleans/3703-two-face-extrudes-join-keep-the-step/recipe.json@@ -0,0 +1,46 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 0,+ 0,+ 0+ ],+ "length": 25,+ "width": 20,+ "height": 35,+ "body_name": "Body1"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 8.5,+ 10,+ 35+ ],+ "face_body": "Body1",+ "distance": 10,+ "direction": "positive",+ "operation": "join"+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "face": [+ 25,+ 12.07,+ 19.2+ ],+ "face_body": "Body1",+ "distance": 10,+ "direction": "positive",+ "operation": "join"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.json b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.jsonnew file mode 100644index 0000000000..ab9f1f5217--- /dev/null+++ b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3729"+ ],+ "what": "extrude `to` a point lying exactly on the top edge of a step: must end at the plane z=20 through the point",+ "source": "analytic",+ "method": "block 20x20x10 = 4000, step 10x10x10 = 1000 (z 10..20), column r=1.5 from the block's top z=10 up to the plane z=20 through `to`: pi*1.5^2*10 = 70.686. V = 5070.686, top at z=20 (the kernel went to z=22.73)",+ "body_count": 1,+ "volume_mm3": 5070.6858,+ "bbox": {+ "min": [+ -10,+ -10,+ 0+ ],+ "max": [+ 10,+ 10,+ 20+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.json b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.jsonnew file mode 100644index 0000000000..b26f535e10--- /dev/null+++ b/tests/kernel-cases/booleans/3729-extrude-to-point-on-step-edge/recipe.json@@ -0,0 +1,245 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "A"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -10,+ -10+ ],+ [+ 10,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 10,+ -10+ ],+ [+ 10,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 10,+ 10+ ],+ [+ -10,+ 10+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -10,+ 10+ ],+ [+ -10,+ -10+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "direction": "positive",+ "profiles": "all"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 10+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "B"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -5,+ -5+ ],+ [+ 5,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 5,+ -5+ ],+ [+ 5,+ 5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 5,+ 5+ ],+ [+ -5,+ 5+ ]+ ]+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ -5,+ 5+ ],+ [+ -5,+ -5+ ]+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "direction": "positive",+ "operation": "join",+ "profiles": "all"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 10+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ },+ "name": "C"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 8,+ 0+ ],+ "radius": 1.5+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "to": [+ 5,+ 0,+ 20+ ],+ "direction": "positive",+ "operation": "join",+ "profiles": "all"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.json b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.jsonnew file mode 100644index 0000000000..6208535855--- /dev/null+++ b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3782",+ "tangency-labs/solidcraft#3425"+ ],+ "what": "emboss on a cylinder with the face pick on the half of the wall opposite the sketch",+ "source": "invariants",+ "method": "the cylinder wall is one logical face, so a pick anywhere on it (between the caps) must be accepted: the emboss succeeds with one valid closed solid. No volume is graded (the badge's shape on a curved wall is not fixed by the issue)",+ "body_count": 1+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.json b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.jsonnew file mode 100644index 0000000000..bb6a56339e--- /dev/null+++ b/tests/kernel-cases/booleans/3782-emboss-on-cylinder-pick-on-far-half/recipe.json@@ -0,0 +1,65 @@+{+ "commands": [+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 10,+ "height": 20,+ "body_name": "Cyl"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 10,+ 0+ ],+ "x_dir": [+ -1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ 1+ ]+ },+ "name": "Badge"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -2,+ 5+ ],+ "p1": [+ 2,+ 10+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.emboss",+ "params": {+ "sketch": "Badge",+ "depth": 1,+ "mode": "emboss",+ "face": [+ 0,+ -10,+ 7.5+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.json b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.jsonnew file mode 100644index 0000000000..603a94c84e--- /dev/null+++ b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/expected.json@@ -0,0 +1,14 @@+{+ "sources": [+ "tangency-labs/solidcraft#3816"+ ],+ "what": "circular pattern of a body about an axis {origin,dir} that does not pass through the world origin",+ "source": "analytic",+ "method": "a 4x4x4 box centred at (39.5,15,-48), 22 mm from the vertical axis through (17.5,15,-48); nine copies 40 deg apart (chord 15 mm > the box diagonal 5.7, no overlap): V = 9*64 = 576. By the 9-fold symmetry the centre of mass lies on the axis: (17.5, 15, -48)",+ "volume_mm3": 576.0,+ "center_of_mass": [+ 17.5,+ 15.0,+ -48.0+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.json b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.jsonnew file mode 100644index 0000000000..b2f707bee1--- /dev/null+++ b/tests/kernel-cases/booleans/3816-circular-pattern-of-body-about-offset-axis/recipe.json@@ -0,0 +1,40 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ 37.5,+ 13,+ -50+ ],+ "length": 4,+ "width": 4,+ "height": 4,+ "body_name": "Part"+ }+ },+ {+ "command": "solid.pattern.circular",+ "params": {+ "bodies": [+ "Part"+ ],+ "axis": {+ "origin": [+ 17.5,+ 15,+ -48+ ],+ "dir": [+ 0,+ 0,+ 1+ ]+ },+ "count": 9,+ "angle": "360 deg"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.json b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.jsonnew file mode 100644index 0000000000..c77c9cb0ab--- /dev/null+++ b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3830"+ ],+ "what": "split a thin-walled cup (shell of a d30 cylinder) with a surface body: an extruded spline surface, extended at both ends",+ "source": "analytic",+ "method": "cup = cylinder r15 h30 shelled 1 mm inward with its top removed: V = pi*15^2*30 - pi*14^2*29 = 3349.04. The surface crosses the whole cup from above its rim to below its floor, so it splits the cup in two; splitting only divides material: two valid bodies whose volumes add up to 3349.04",+ "body_count": 2,+ "volume_mm3": 3348.938+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.json b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.jsonnew file mode 100644index 0000000000..3049ad63f2--- /dev/null+++ b/tests/kernel-cases/booleans/3830-split-cup-by-extended-spline-surface/recipe.json@@ -0,0 +1,154 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 15+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 30,+ "operation": "new",+ "body_name": "Body1"+ }+ },+ {+ "command": "solid.shell",+ "params": {+ "faces": [+ [+ -4.2209,+ -6.6007,+ 30+ ]+ ],+ "thickness": 1,+ "tangent_chain": true,+ "body": "Body1"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "YZ",+ "name": "Cut"+ }+ },+ {+ "command": "sketch.spline.fit_point",+ "params": {+ "points": [+ [+ -15.2,+ 30+ ],+ [+ 3.6,+ 19+ ],+ [+ 15,+ 0.1+ ],+ [+ 15.345826150212766,+ -0.4420637743548844+ ]+ ],+ "ids": [+ "s1"+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "surface.extrude",+ "params": {+ "sketch": "Cut",+ "curves": [+ "s1"+ ],+ "distance": 30,+ "direction": "symmetric",+ "body_name": "Body2"+ }+ },+ {+ "command": "surface.extend",+ "params": {+ "body": "Body2",+ "edges": [+ [+ 0,+ -15.2,+ 30+ ]+ ],+ "distance": 10+ }+ },+ {+ "command": "surface.extend",+ "params": {+ "body": "Body2",+ "edges": [+ [+ 0,+ 15.345826150212766,+ -0.4420637743548844+ ]+ ],+ "distance": 10+ }+ },+ {+ "command": "solid.split_body",+ "params": {+ "body": "Body1",+ "tool": {+ "body": "Body2",+ "point": [+ 21.94918088438493,+ 17.139934956546313,+ -3.829146796035829+ ]+ }+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.json b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.jsonnew file mode 100644index 0000000000..8ac28b9e83--- /dev/null+++ b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3841",+ "tangency-labs/solidcraft#168"+ ],+ "what": "Join of a ring (r10..15) onto a coin (r10) that touch only along a circle: no fusion that moves the ring",+ "source": "invariants",+ "outcome": "refused",+ "method": "the bodies share one circular edge and no area, so a join has no valid solid to give: the right answer is a clean refusal (New Body gives two independent solids). Succeeding means the kernel moved or rotated the ring to fuse it"+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.json b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.jsonnew file mode 100644index 0000000000..d4f704ab5d--- /dev/null+++ b/tests/kernel-cases/booleans/3841-join-touching-along-one-circle-only/recipe.json@@ -0,0 +1,112 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 10+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 3,+ "operation": "new",+ "body_name": "Coin"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 3+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 10+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 15+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "profiles": [+ {+ "point": [+ 12,+ 0+ ]+ }+ ],+ "distance": 3,+ "operation": "join",+ "targets": [+ "Coin"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.json b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.jsonnew file mode 100644index 0000000000..82f44405ab--- /dev/null+++ b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3887",+ "tangency-labs/solidcraft#2844"+ ],+ "what": "a ring (r19.6/20.8, 20 tall) joined onto an 80x80x1.2 plate with a 9x9 grid of 6.4 mm square holes; the ring's foot crosses the holes",+ "source": "analytic",+ "method": "plate 80x80x1.2 minus 81 holes 6.4x6.4 (pitch 8, centred): 7680 - 81*6.4^2*1.2; ring standing on the top face (touching, no overlap): pi(20.8^2-19.6^2)*20. One body. The ring's walls must stay whole cylinder faces (the old kernel cut them into full-height strips at every hole edge); the total face count is not graded because the ring's foot over the holes is not worked out here",+ "body_count": 1,+ "volume_mm3": 6744.7762+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.json b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.jsonnew file mode 100644index 0000000000..557b966c41--- /dev/null+++ b/tests/kernel-cases/booleans/3887-ring-standing-on-perforated-plate/recipe.json@@ -0,0 +1,1176 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -40,+ -40+ ],+ "p1": [+ 40,+ 40+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -35.2+ ],+ "p1": [+ -28.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -27.2+ ],+ "p1": [+ -28.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -19.2+ ],+ "p1": [+ -28.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -11.2+ ],+ "p1": [+ -28.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ -3.2+ ],+ "p1": [+ -28.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 4.8+ ],+ "p1": [+ -28.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 12.8+ ],+ "p1": [+ -28.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 20.8+ ],+ "p1": [+ -28.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -35.2,+ 28.8+ ],+ "p1": [+ -28.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -35.2+ ],+ "p1": [+ -20.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -27.2+ ],+ "p1": [+ -20.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -19.2+ ],+ "p1": [+ -20.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -11.2+ ],+ "p1": [+ -20.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ -3.2+ ],+ "p1": [+ -20.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 4.8+ ],+ "p1": [+ -20.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 12.8+ ],+ "p1": [+ -20.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 20.8+ ],+ "p1": [+ -20.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -27.2,+ 28.8+ ],+ "p1": [+ -20.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -35.2+ ],+ "p1": [+ -12.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -27.2+ ],+ "p1": [+ -12.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -19.2+ ],+ "p1": [+ -12.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -11.2+ ],+ "p1": [+ -12.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ -3.2+ ],+ "p1": [+ -12.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 4.8+ ],+ "p1": [+ -12.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 12.8+ ],+ "p1": [+ -12.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 20.8+ ],+ "p1": [+ -12.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -19.2,+ 28.8+ ],+ "p1": [+ -12.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -35.2+ ],+ "p1": [+ -4.8,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -27.2+ ],+ "p1": [+ -4.8,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -19.2+ ],+ "p1": [+ -4.8,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -11.2+ ],+ "p1": [+ -4.8,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ -3.2+ ],+ "p1": [+ -4.8,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 4.8+ ],+ "p1": [+ -4.8,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 12.8+ ],+ "p1": [+ -4.8,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 20.8+ ],+ "p1": [+ -4.8,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -11.2,+ 28.8+ ],+ "p1": [+ -4.8,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -35.2+ ],+ "p1": [+ 3.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -27.2+ ],+ "p1": [+ 3.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -19.2+ ],+ "p1": [+ 3.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -11.2+ ],+ "p1": [+ 3.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ -3.2+ ],+ "p1": [+ 3.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 4.8+ ],+ "p1": [+ 3.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 12.8+ ],+ "p1": [+ 3.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 20.8+ ],+ "p1": [+ 3.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -3.2,+ 28.8+ ],+ "p1": [+ 3.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -35.2+ ],+ "p1": [+ 11.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -27.2+ ],+ "p1": [+ 11.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -19.2+ ],+ "p1": [+ 11.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -11.2+ ],+ "p1": [+ 11.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ -3.2+ ],+ "p1": [+ 11.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 4.8+ ],+ "p1": [+ 11.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 12.8+ ],+ "p1": [+ 11.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 20.8+ ],+ "p1": [+ 11.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 4.8,+ 28.8+ ],+ "p1": [+ 11.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -35.2+ ],+ "p1": [+ 19.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -27.2+ ],+ "p1": [+ 19.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -19.2+ ],+ "p1": [+ 19.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -11.2+ ],+ "p1": [+ 19.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ -3.2+ ],+ "p1": [+ 19.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 4.8+ ],+ "p1": [+ 19.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 12.8+ ],+ "p1": [+ 19.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 20.8+ ],+ "p1": [+ 19.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12.8,+ 28.8+ ],+ "p1": [+ 19.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -35.2+ ],+ "p1": [+ 27.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -27.2+ ],+ "p1": [+ 27.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -19.2+ ],+ "p1": [+ 27.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -11.2+ ],+ "p1": [+ 27.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ -3.2+ ],+ "p1": [+ 27.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 4.8+ ],+ "p1": [+ 27.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 12.8+ ],+ "p1": [+ 27.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 20.8+ ],+ "p1": [+ 27.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 20.8,+ 28.8+ ],+ "p1": [+ 27.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -35.2+ ],+ "p1": [+ 35.2,+ -28.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -27.2+ ],+ "p1": [+ 35.2,+ -20.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -19.2+ ],+ "p1": [+ 35.2,+ -12.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -11.2+ ],+ "p1": [+ 35.2,+ -4.8+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ -3.2+ ],+ "p1": [+ 35.2,+ 3.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 4.8+ ],+ "p1": [+ 35.2,+ 11.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 12.8+ ],+ "p1": [+ 35.2,+ 19.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 20.8+ ],+ "p1": [+ 35.2,+ 27.2+ ]+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 28.8,+ 28.8+ ],+ "p1": [+ 35.2,+ 35.2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "profiles": [+ {+ "point": [+ 4,+ 4+ ]+ }+ ],+ "distance": 1.2,+ "operation": "new",+ "body_name": "Plate"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 1.2+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 20.8+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 19.6+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "profiles": [+ {+ "point": [+ 20.2,+ 0+ ]+ }+ ],+ "distance": 20,+ "operation": "join",+ "targets": [+ "Plate"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.json b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.jsonnew file mode 100644index 0000000000..fa0fdc1239--- /dev/null+++ b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3968"+ ],+ "what": "a hole of diameter 10 drilled into the top of a truncated cone whose top is also diameter 10 (the hole wall meets the cone at the top rim)",+ "source": "analytic",+ "method": "truncated cone r=15 at the base, r=5 at z=20: V = pi*20/3*(15^2+15*5+5^2) = 6806.78; the flat-bottomed hole r=5, 10 deep from the top lies inside the cone (the cone is wider below z=20): minus pi*25*10 = 785.40. V = 6021.38. Faces: base, cone, hole wall, hole floor = 4",+ "body_count": 1,+ "volume_mm3": 6021.3859,+ "faces": 4+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.json b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.jsonnew file mode 100644index 0000000000..0f7ba975f6--- /dev/null+++ b/tests/kernel-cases/booleans/3968-hole-as-wide-as-a-cones-top/recipe.json@@ -0,0 +1,62 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 0+ ],+ "radius": 15+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 20,+ "taper": "-26.565051177 deg",+ "operation": "new",+ "body_name": "Mountain"+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 0,+ 0,+ 20+ ],+ "diameter": 10,+ "depth": 10,+ "type": "simple"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.json b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.jsonnew file mode 100644index 0000000000..1823999a9e--- /dev/null+++ b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4008"+ ],+ "what": "symmetric 180 deg revolve cut about a vertical edge of a block, the tool's end faces lying in the block's side face",+ "source": "analytic",+ "method": "block 60x20x25; the tool (rectangle 2.6..9.6 from the axis, 21 tall) turned +-90 deg about the block's back-left vertical edge; only the quarter inside the block (x>0, y<20) is material: V = 60*20*25 - pi(9.6^2-2.6^2)*21/4",+ "body_count": 1,+ "volume_mm3": 28591.4669+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.json b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.jsonnew file mode 100644index 0000000000..c52200a73f--- /dev/null+++ b/tests/kernel-cases/booleans/4008-symmetric-revolve-cut-ends-in-side-face/recipe.json@@ -0,0 +1,109 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 60,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 25,+ "operation": "new"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 20,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 0,+ -1+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 2.6,+ -23+ ],+ "p1": [+ 9.6,+ -2+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.revolve",+ "params": {+ "axis": {+ "origin": [+ 0,+ 20,+ 0+ ],+ "dir": [+ 0,+ 0,+ 1+ ]+ },+ "angle": "180 deg",+ "operation": "cut",+ "direction": "symmetric"+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.json b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.jsonnew file mode 100644index 0000000000..5a3201277a--- /dev/null+++ b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4011"+ ],+ "what": "a blind hole mirrored to a spot where half its top disc lies under a wall's foot",+ "source": "analytic",+ "method": "plate 100x60x10 (6000+... =60000) plus wall 10x60x10 (6000) = 66000. Each blind hole r=3, 4 deep from z=5 removes pi*9*4 = 113.097 from the plate only (the wall is above z=5, untouched); two holes: V = 66000 - 2*pi*9*4",+ "body_count": 1,+ "volume_mm3": 65773.8053+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.json b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.jsonnew file mode 100644index 0000000000..84415e4369--- /dev/null+++ b/tests/kernel-cases/booleans/4011-mirror-of-cut-under-wall/recipe.json@@ -0,0 +1,161 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 0+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -50,+ -30+ ],+ "p1": [+ 50,+ 30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "operation": "new",+ "direction": "symmetric"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 5+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 10,+ -30+ ],+ "p1": [+ 20,+ 30+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 10,+ "operation": "join"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "origin": [+ 0,+ 0,+ 5+ ],+ "x_dir": [+ 1,+ 0,+ 0+ ],+ "y_dir": [+ 0,+ 1,+ 0+ ]+ }+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 0,+ 10+ ],+ "radius": 3+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "distance": 4,+ "operation": "cut",+ "direction": "negative"+ }+ },+ {+ "command": "solid.mirror",+ "params": {+ "features": [+ "Extrude3"+ ],+ "plane": {+ "origin": [+ 10,+ 0,+ 0+ ],+ "normal": [+ 1,+ 0,+ 0+ ]+ }+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.json b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.jsonnew file mode 100644index 0000000000..83242c8d3b--- /dev/null+++ b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#4058",+ "tangency-labs/solidcraft#4059"+ ],+ "what": "a 10 mm ring (rounded corners) extruded 40 mm as a Join round a floor's outline: it touches the floor back to back on its flat sides and rounded corners",+ "source": "analytic",+ "method": "floor 60x50 with r4 corners, 3.25 thick: (3000-(4-pi)*16)*3.25; minus the pocket 40x30 (r3 corners), 2.25 deep, walls leaning in 15 deg (integral of (40-2d)(30-2d)-(4-pi)(3-d)^2 with d=t*tan15, t=0..2.25); plus the socket 36x26x4.75: 11559.35 (the PR measures 11559.34). Ring area (80*70-(4-pi)*14^2)-(60*50-(4-pi)*4^2) = 2445.487, times 40 = 97819.467. The ring only touches the floor, so V = floor + ring. One solid",+ "body_count": 1,+ "volume_mm3": 109378.817+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.json b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.jsonnew file mode 100644index 0000000000..f6128a45bc--- /dev/null+++ b/tests/kernel-cases/booleans/4058-walls-joined-flush-round-a-floor/recipe.json@@ -0,0 +1,153 @@+{+ "commands": [+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Outline"+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 60,+ 50+ ],+ "radius": 4+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ -10,+ -10+ ],+ "p1": [+ 70,+ 60+ ],+ "radius": 14+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Outline",+ "profiles": [+ {+ "point": [+ 30,+ 25+ ]+ }+ ],+ "distance": 3.25,+ "body_name": "Floor"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "offset": 3.25,+ "name": "Pocket"+ }+ },+ {+ "command": "sketch.rectangle.rounded",+ "params": {+ "p0": [+ 10,+ 10+ ],+ "p1": [+ 50,+ 40+ ],+ "radius": 3+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Pocket",+ "distance": 2.25,+ "direction": "negative",+ "taper": "-15 deg",+ "operation": "cut",+ "targets": [+ "Floor"+ ]+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Socket"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 12,+ 12+ ],+ "p1": [+ 48,+ 38+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Socket",+ "distance": 4.75,+ "direction": "negative",+ "operation": "join",+ "targets": [+ "Floor"+ ]+ }+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Outline",+ "profiles": [+ {+ "point": [+ -5,+ 25+ ]+ }+ ],+ "distance": 40,+ "operation": "join",+ "targets": [+ "Floor"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.jsonnew file mode 100644index 0000000000..177741c0f5--- /dev/null+++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4095"+ ],+ "what": "a slab cut whose +x face stands 6.73e-05 mm (0.90 x the coincidence tolerance 7.48e-05) off a through-bore's wall (R=10), beside the bore",+ "source": "analytic",+ "method": "plate 60x40x20 minus the bore pi R^2*20 minus the notch (the slab 6x16 from z=12 up through the top z=20: 6*16*8 = 768), which the bore beside it does not change. V = 60*40*20 - pi*10^2*20 - 768. The bug removed about 5% too much with no warning",+ "body_count": 1,+ "volume_mm3": 40948.8147+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.jsonnew file mode 100644index 0000000000..b84e5e07f3--- /dev/null+++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r10/recipe.json@@ -0,0 +1,51 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -30.0,+ -20.0,+ 0+ ],+ "length": 60,+ "width": 40,+ "height": 20,+ "body_name": "Plate"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 10,+ "height": 22,+ "base": [+ 0,+ 0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Plate"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -16.0000673497,+ -8,+ 12+ ],+ "length": 6,+ "width": 16,+ "height": 14,+ "operation": "cut",+ "targets": [+ "Plate"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.jsonnew file mode 100644index 0000000000..31ff60216e--- /dev/null+++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#4095"+ ],+ "what": "a slab cut whose +x face stands 6.60e-05 mm (0.60 x the coincidence tolerance 1.10e-04) off a through-bore's wall (R=15), beside the bore",+ "source": "analytic",+ "method": "plate 90x60x20 minus the bore pi R^2*20 minus the notch (the slab 6x16 from z=12 up through the top z=20: 6*16*8 = 768), which the bore beside it does not change. V = 90*60*20 - pi*15^2*20 - 768. The bug removed about 5% too much with no warning",+ "body_count": 1,+ "volume_mm3": 93094.8331+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.jsonnew file mode 100644index 0000000000..723c9275fd--- /dev/null+++ b/tests/kernel-cases/booleans/4095-slab-cut-standing-off-a-bore-r15/recipe.json@@ -0,0 +1,51 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -45.0,+ -30.0,+ 0+ ],+ "length": 90,+ "width": 60,+ "height": 20,+ "body_name": "Plate"+ }+ },+ {+ "command": "solid.cylinder",+ "params": {+ "radius": 15,+ "height": 22,+ "base": [+ 0,+ 0,+ -1+ ],+ "operation": "cut",+ "targets": [+ "Plate"+ ]+ }+ },+ {+ "command": "solid.box",+ "params": {+ "corner": [+ -21.000066,+ -8,+ 12+ ],+ "length": 6,+ "width": 16,+ "height": 14,+ "operation": "cut",+ "targets": [+ "Plate"+ ]+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/booleans/skipped-c.json b/tests/kernel-cases/booleans/skipped-c.jsonnew file mode 100644index 0000000000..f6e080a0ce--- /dev/null+++ b/tests/kernel-cases/booleans/skipped-c.json@@ -0,0 +1,306 @@+[+ {+ "source": "tangency-labs/solidcraft#3404",+ "why": "needs a user's design (plate with a tab profile) that can't be rebuilt: the report names only the failing join extrude"+ },+ {+ "source": "tangency-labs/solidcraft#3405",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3406",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)"+ },+ {+ "source": "tangency-labs/solidcraft#3411",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of three bodies, 'Union: no result')"+ },+ {+ "source": "tangency-labs/solidcraft#3426",+ "why": "UI only: the extrude preview's initial direction on a picked face, no wrong geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3427",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3428",+ "why": "other area: crashes (kernel panic in a cut with an imported STEP bolt; the STEP file is from a parts library and can't be rebuilt)"+ },+ {+ "source": "tangency-labs/solidcraft#3448",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude of two profiles, 'Union: no result', cylinders)"+ },+ {+ "source": "tangency-labs/solidcraft#3479",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (rectangular pattern of a chamfer and an extrude: 'no edge near ...')"+ },+ {+ "source": "tangency-labs/solidcraft#3496",+ "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')"+ },+ {+ "source": "tangency-labs/solidcraft#3498",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)"+ },+ {+ "source": "tangency-labs/solidcraft#3514",+ "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)"+ },+ {+ "source": "tangency-labs/solidcraft#3518",+ "why": "other area: shell (split of a user's body by a plane, 'Intersect: no result')"+ },+ {+ "source": "tangency-labs/solidcraft#3531",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3539",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (thin extrude of a curve, join)"+ },+ {+ "source": "tangency-labs/solidcraft#3547",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (cut through an extruded spline)"+ },+ {+ "source": "tangency-labs/solidcraft#3563",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3578",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join of a revolve with a chamfered box: the description is too vague to rebuild)"+ },+ {+ "source": "tangency-labs/solidcraft#3586",+ "why": "other area: sketch (a sketch rectangular pattern, over-constrain error from the sketch solver, no solid geometry)"+ },+ {+ "source": "tangency-labs/solidcraft#3598",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (a fake edge left after an extrude chain on a chamfer)"+ },+ {+ "source": "tangency-labs/solidcraft#3602",+ "why": "other area: shell (split of a user's body by a plane, 'Intersect: no result')"+ },+ {+ "source": "tangency-labs/solidcraft#3607",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3608",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (circular pattern of an extrude feature, cut 'no result')"+ },+ {+ "source": "tangency-labs/solidcraft#3632",+ "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3634",+ "why": "UI only: hole tool auto-switching to multi-hole mode"+ },+ {+ "source": "tangency-labs/solidcraft#3645",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3648",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3649",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (join extrude refusing for zero-thickness edge contact; the contact is not described, see #3841 for the circular-edge case)"+ },+ {+ "source": "tangency-labs/solidcraft#3656",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3657",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3667",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3680",+ "why": "other area: sheet metal (a hole in sheet-metal material is refused)"+ },+ {+ "source": "tangency-labs/solidcraft#3707",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3709",+ "why": "no geometry: a video of cutting a bolt in another CAD tool, no model or command"+ },+ {+ "source": "tangency-labs/solidcraft#3725",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3727",+ "why": "UI only: sketch.pattern.circular was run with no sketch being edited"+ },+ {+ "source": "tangency-labs/solidcraft#3732",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (French report: Combine cut keeping the tool gives nothing, parts are named Equerre and Rallonge2)"+ },+ {+ "source": "tangency-labs/solidcraft#3734",+ "why": "not geometry: the failing step is a profile that is not closed in the user's sketch"+ },+ {+ "source": "tangency-labs/solidcraft#3741",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)"+ },+ {+ "source": "tangency-labs/solidcraft#3753",+ "why": "other area: fillets (a chamfer inside a circular pattern is too large for the edge, 'grow the part'; the pattern itself is not at fault)"+ },+ {+ "source": "tangency-labs/solidcraft#3757",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)"+ },+ {+ "source": "tangency-labs/solidcraft#3767",+ "why": "not geometry: a face lineage refusal ('no supported stable semantic lineage') on a user's body"+ },+ {+ "source": "tangency-labs/solidcraft#3777",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3785",+ "why": "not geometry: feature request (pattern along a closed path around a rounded rectangle)"+ },+ {+ "source": "tangency-labs/solidcraft#3787",+ "why": "other area: import (a mesh body: booleans need a solid, 'mesh bodies can only be moved, measured and exported')"+ },+ {+ "source": "tangency-labs/solidcraft#3789",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3791",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3793",+ "why": "no geometry: a screenshot only, the report gives no command or model"+ },+ {+ "source": "tangency-labs/solidcraft#3803",+ "why": "other area: UI only (pattern of a sketch feature is not offered: 'Sketch2 cannot be patterned')"+ },+ {+ "source": "tangency-labs/solidcraft#3808",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('there is no body to cut or intersect' on a cut extrude from an enclosure face)"+ },+ {+ "source": "tangency-labs/solidcraft#3811",+ "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})"+ },+ {+ "source": "tangency-labs/solidcraft#3823",+ "why": "not geometry: an expression error (`e` is not a parameter)"+ },+ {+ "source": "tangency-labs/solidcraft#3824",+ "why": "other area: threads (a threaded hole needs a cylindrical face: 'no cylindrical face there to thread')"+ },+ {+ "source": "tangency-labs/solidcraft#3843",+ "why": "UI only: the pattern dialog's axis picker ('Axis1' is not X, Y, Z or {origin, dir})"+ },+ {+ "source": "tangency-labs/solidcraft#3844",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (holes of an extrude cut, `flange_thickenss` parameter, not visible in the final result)"+ },+ {+ "source": "tangency-labs/solidcraft#3865",+ "why": "UI only: shift-click multiple selection in the Combine dialog"+ },+ {+ "source": "tangency-labs/solidcraft#3866",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)"+ },+ {+ "source": "tangency-labs/solidcraft#3869",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry ('lumps: ...' error on a cut or join in a user's design)"+ },+ {+ "source": "tangency-labs/solidcraft#3879",+ "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)"+ },+ {+ "source": "tangency-labs/solidcraft#3904",+ "why": "UI only: selecting several non-coplanar profiles in Extrude (which profiles the dialog accepts), no wrong geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3926",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut from a face of a user's body)"+ },+ {+ "source": "tangency-labs/solidcraft#3932",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3948",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#3961",+ "why": "UI only: should hidden bodies be left out of a cut: a visibility policy, the cut itself is right"+ },+ {+ "source": "tangency-labs/solidcraft#3975",+ "why": "not geometry: feature request (rework of the hole tool's positioning)"+ },+ {+ "source": "tangency-labs/solidcraft#3978",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4017",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4036",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4041",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry (extrude cut 'up to' another body: 'nothing lies between the profile and the To object')"+ },+ {+ "source": "tangency-labs/solidcraft#4042",+ "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4070",+ "why": "not geometry: hole not created, the report gives only the sketch point id"+ },+ {+ "source": "tangency-labs/solidcraft#4075",+ "why": "needs a user's design that can't be rebuilt synthetically: the report gives only the failing command, no geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4077",+ "why": "UI only: sketch mirror about an origin axis is not offered in the sketch tool, no solid geometry"+ },+ {+ "source": "tangency-labs/solidcraft#4098",+ "why": "not geometry: documentation of the taper sign (a positive taper makes the walls lean outward); the behaviour is not wrong"+ },+ {+ "source": "tangency-labs/solidcraft#4111",+ "why": "UI only: Press/Pull opens Extrude on a selection with no planar face or profile"+ },+ {+ "source": "tangency-labs/solidcraft#4124",+ "why": "other area: import (the extrude acts on an imported object's orientation / a STEP file's face)"+ }+]\ No newline at end of file