SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 43/509: kernel-cases: sheet-metal cut-out, flange and refusal cases from #296, #1095, #1280, #1295, #1311, #1979, #3078, #3234, #3324, #3353
Brennen Herbrucke1e7b4fceb63
diff --git a/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/expected.json b/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/expected.jsonnew file mode 100644index 0000000000..82ac43b538--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1095"+ ],+ "what": "a flange unfolded, a triangular cut-out with a corner on the sheet's own edge at the middle of the bend zone, refolded: sew failed (this wire is not simple)",+ "source": "analytic",+ "method": "T = 2, R = 2, K = 0.5. Flat area: base 100 x (60 - 4) + bend 100*BA with BA = (pi/2)(2 + 1) + flange straight 100*(20 - 4) = 7671.2389; the triangle (0, yc), (3, yc-1), (3, yc+1) has area 3 and lies inside it. K = 0.5, so the folded volume is the flat area times t: V = 2*(7671.2389 - 3)",+ "body_count": 1,+ "volume_mm3": 15336.477796076937+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/recipe.json b/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/recipe.jsonnew file mode 100644index 0000000000..03abe6cd25--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1095-refold-a-cutout-with-a-corner-on-the-sheets-edge-at-a-bend/recipe.json@@ -0,0 +1,112 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Rule",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Plate"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Plate"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 50,+ 60,+ 2+ ]+ ],+ "height": 20,+ "angle": 90+ }+ },+ {+ "command": "sheet.unfold",+ "params": {}+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Cutout"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0,+ 58.356194+ ],+ [+ 3,+ 57.356194+ ],+ [+ 3,+ 59.356194+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Cutout",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "sheet.refold",+ "params": {}+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/expected.json b/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/expected.jsonnew file mode 100644index 0000000000..e51e15a271--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1280"+ ],+ "what": "a 5 mm hole drilled square to the face of a 45 degree flange: the drill cap's certificate refused it by 1e-11 mm",+ "source": "analytic",+ "method": "T = 2.5, R = 2.5, K = 0.44, 100 x 60 base and a 15 mm flange at 45 degrees, setback s = 5*tan(22.5 deg) = 2.0711: V45 = 100*(60 - s)*2.5 + 100*(15 - s)*2.5 + (pi/4)(25 - 6.25)*100/2 = 18450.78; the hole removes pi*2.5^2*2.5 = 49.087 of the flange: V = V45 - 15.625*pi",+ "body_count": 1,+ "volume_mm3": 18401.68948704003+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/recipe.json b/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/recipe.jsonnew file mode 100644index 0000000000..8d49006dc5--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1280-hole-square-to-a-45-degree-flange/recipe.json@@ -0,0 +1,74 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel (mm)",+ "thickness": "2.5 mm",+ "active": true,+ "bend_radius": "2.5 mm",+ "k_factor": 0.44+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "edges": [+ [+ 50,+ 0,+ 2.5+ ]+ ],+ "height": 15,+ "angle": 45+ }+ },+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 50,+ -5.656854,+ 5.656854+ ],+ "diameter": 5+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/expected.json b/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/expected.jsonnew file mode 100644index 0000000000..e769d242ff--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/expected.json@@ -0,0 +1,12 @@+{+ "sources": [+ "tangency-labs/solidcraft#1295",+ "tangency-labs/solidcraft#1338"+ ],+ "what": "a 100 x 60 sheet with a 45 degree 40 mm flange and a slot cut across the flange just past its bend: the rest of the flange keeps no material joining it to the base",+ "source": "analytic",+ "method": "T = 2.5, R = 2.5, setback s = (R+T)tan(22.5 deg) = 2.0711: base 100*(60 - s)*2.5, leg 100*(40 - s)*2.5, bend (pi/4)((R+T)^2 - R^2)*100/2; V0 = 24700.7. The slot (110 x 1.5 drawn, 100 x 1.5 over the sheet) lies in the flat flange panel past the bend zone and removes 100*1.5*2.5 = 375. A cut keeps every piece of material it leaves, so the rest of the flange stays in the body as a shell of its own: V = V0 - 375 (valid is false because the body then has two shells)",+ "body_count": 1,+ "volume_mm3": 24325.77687225237,+ "valid": false+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/recipe.json b/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/recipe.jsonnew file mode 100644index 0000000000..13deb32a48--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1295-a-slot-across-a-flange-leaves-the-rest-of-it-as-a-loose-piece/recipe.json@@ -0,0 +1,102 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel (mm)",+ "thickness": "2.5 mm",+ "active": true,+ "bend_radius": "2.5 mm",+ "k_factor": 0.44+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "edges": [+ [+ 50,+ 0,+ 2.5+ ]+ ],+ "height": 40,+ "angle": 45+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": {+ "face": [+ 50,+ -11.4645,+ 15+ ]+ },+ "name": "Slot"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ -5,+ -3+ ],+ "p1": [+ 105,+ -1.5+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Slot",+ "through_all": true,+ "direction": "negative",+ "operation": "cut"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/expected.json b/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/expected.jsonnew file mode 100644index 0000000000..f089986aef--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#1311"+ ],+ "what": "a 100 x 60 plate turned 62 degrees about the origin with a 90 degree inside flange on one edge: the trimmed corner falls on the sew grid and the flange failed to close",+ "source": "analytic",+ "method": "T = 2, R = 1, K = 0.5, setback R + T = 3. Plate 100 x 57 x 2 after the setback = 11400; the bend is a quarter annulus of radii 1 and 3 over 100 mm = (pi/4)(9 - 1)*100*... = (pi/2)(9-1)*100/2 = 628.319; the leg 20 - 3 = 17 long: 17*2*100 = 3400. V = 11400 + 628.319 + 3400",+ "body_count": 1,+ "volume_mm3": 15428.31853071796+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/recipe.json b/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/recipe.jsonnew file mode 100644index 0000000000..2423693666--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1311-inside-flange-on-a-plate-turned-62-degrees/recipe.json@@ -0,0 +1,77 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel 2",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Plate"+ }+ },+ {+ "command": "sketch.line",+ "params": {+ "points": [+ [+ 0.0,+ 0.0+ ],+ [+ 46.947156279,+ 88.294759286+ ],+ [+ -6.029699293,+ 116.463053053+ ],+ [+ -52.976855572,+ 28.168293767+ ]+ ],+ "closed": true+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Plate"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 23.473578139,+ 44.147379643,+ 2+ ]+ ],+ "height": 20,+ "angle": 90,+ "radius": 1,+ "position": "inside"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/expected.json b/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/expected.jsonnew file mode 100644index 0000000000..f1b8c959e0--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#1979",+ "tangency-labs/solidcraft#1980"+ ],+ "what": "on a folded sheet a rectangular cut-out and then twenty 4 mm holes in one sketch: a cut after a cut was dropped without a word, and many holes ran out of budget",+ "source": "analytic",+ "method": "T = 2, R = 2: base 60 x 36 + flange straight 16, 60 wide, bend (pi/2)(16-4)*60/2 = 565.487: V0 = 60*2*(36 + 16) + 565.487. Cuts through the flat base, clear of each other and of the bend: a 7 x 6 rectangle (42 mm2) and twenty holes of radius 2 (20*pi*4 mm2), each removing area*2. V = V0 - 2*(42 + 80*pi)",+ "body_count": 1,+ "volume_mm3": 6218.831853071796+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/recipe.json b/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/recipe.jsonnew file mode 100644index 0000000000..c595d5f38f--- /dev/null+++ b/tests/kernel-cases/sheet-metal/1979-every-cut-after-a-cut-machines-the-sheet/recipe.json@@ -0,0 +1,316 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "S",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.4+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 60,+ 40+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 30,+ 0,+ 2+ ]+ ],+ "height": 20+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Slot"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 50,+ 14+ ],+ "p1": [+ 57,+ 20+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Slot",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Holes"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 8,+ 10+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 8,+ 18+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 8,+ 26+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 8,+ 34+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 17,+ 10+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 17,+ 18+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 17,+ 26+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 17,+ 34+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 26,+ 10+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 26,+ 18+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 26,+ 26+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 26,+ 34+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 35,+ 10+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 35,+ 18+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 35,+ 26+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 35,+ 34+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 44,+ 10+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 44,+ 18+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 44,+ 26+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 44,+ 34+ ],+ "radius": 2+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Holes",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/expected.json b/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/expected.jsonnew file mode 100644index 0000000000..7b3b863b02--- /dev/null+++ b/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#296",+ "tangency-labs/solidcraft#355"+ ],+ "what": "an 80 x 40 base with a 30 mm flange on the y = 0 edge and a 15 mm flange on the x = 80 edge, and a round hole through the base beside them: sew failed with a non-manifold edge contact",+ "source": "invariants",+ "method": "the hole is cut straight through the flat base, clear of both bends and of the corner, so it must give one valid closed body; the corner geometry of two adjacent flanges has no simple closed form, so no volume is graded",+ "body_count": 1+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/recipe.json b/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/recipe.jsonnew file mode 100644index 0000000000..9b090f2948--- /dev/null+++ b/tests/kernel-cases/sheet-metal/296-hole-in-a-base-with-two-adjacent-edge-flanges/recipe.json@@ -0,0 +1,107 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "S",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.4+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 80,+ 40+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 40,+ 0,+ 2+ ]+ ],+ "height": 30+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 80,+ 20,+ 2+ ]+ ],+ "height": 15+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Hole"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 25,+ 20+ ],+ "radius": 3+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Hole",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/expected.json b/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/expected.jsonnew file mode 100644index 0000000000..95405011a9--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/expected.json@@ -0,0 +1,22 @@+{+ "sources": [+ "tangency-labs/solidcraft#3078",+ "tangency-labs/solidcraft#3274"+ ],+ "what": "an edge flange on the side edge of an existing wall, meeting a flange on the base across the existing bend with a round corner relief (not supported yet: a flange on the side of another flange)",+ "source": "invariants",+ "method": "one valid closed body: a 120 x 90 base with a 30 mm wall on its y = 0 edge and a 20 mm flange on its x = 120 edge, plus a flange on the wall's side edge (x = 120) that mitres with it. The outer faces stand on the base's outline and the tallest wall is 30 high, so the bounding box is 120 x 90 x 30 (x 0..120, y 0..90, z 0..30)",+ "body_count": 1,+ "bbox": {+ "min": [+ 0,+ 0,+ 0+ ],+ "max": [+ 120,+ 90,+ 30+ ]+ }+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/recipe.json b/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/recipe.jsonnew file mode 100644index 0000000000..cd70e1fe28--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3078-flange-on-the-side-edge-of-a-flange/recipe.json@@ -0,0 +1,86 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Sheet 2 mm",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "1 mm",+ "k_factor": 0.5,+ "gap": "0.5 mm"+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 120,+ 90+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "edges": [+ [+ 60,+ 0,+ 2+ ]+ ],+ "height": "30 mm",+ "angle": "90 deg"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "edges": [+ [+ 120,+ 45,+ 2+ ],+ [+ 120,+ 2,+ 16.5+ ]+ ],+ "height": "20 mm",+ "angle": "90 deg",+ "position": "inside",+ "corner_relief_shape": "round",+ "corner_relief": "4 mm"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/expected.json b/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/expected.jsonnew file mode 100644index 0000000000..1082837964--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/expected.json@@ -0,0 +1,10 @@+{+ "sources": [+ "tangency-labs/solidcraft#3234",+ "tangency-labs/solidcraft#3273"+ ],+ "what": "a second edge flange picked on the bend line of an existing flange made a doubled flange with a gap and two shells in one body",+ "source": "invariants",+ "method": "the base's edge at y = 5 (the setback R + T = 5 from the first flange) is the bend line of the existing flange, not a free edge; a flange there would stand on material the first bend already occupies. The right behaviour is a clean refusal that leaves the sheet unchanged",+ "outcome": "refused"+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/recipe.json b/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/recipe.jsonnew file mode 100644index 0000000000..6388f997b6--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3234-edge-flange-on-the-bend-line-refused/recipe.json@@ -0,0 +1,73 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "Steel",+ "thickness": "2.5 mm",+ "active": true,+ "bend_radius": "2.5 mm",+ "k_factor": 0.44+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 50,+ 0,+ 2.5+ ]+ ],+ "height": 20+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 50,+ 5,+ 2.5+ ]+ ],+ "height": 10+ }+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/expected.json b/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/expected.jsonnew file mode 100644index 0000000000..543c0b763f--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3324",+ "tangency-labs/solidcraft#3325",+ "tangency-labs/solidcraft#3418"+ ],+ "what": "a fillet on a sheet metal corner changes the body but not its sheet model, so the flat pattern would be a sharp rectangle: it must refuse",+ "source": "invariants",+ "method": "after Fillet R10 on a corner of a 100 x 60 sheet the body has a round, and a flat pattern written from the sheet model would be the sharp 100 x 60 rectangle, a different part from the design; the right behaviour is a clean refusal naming the feature",+ "outcome": "refused"+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/recipe.json b/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/recipe.jsonnew file mode 100644index 0000000000..c5841ade0f--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3324-flat-pattern-refused-after-a-fillet-on-the-sheet/recipe.json@@ -0,0 +1,62 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "S",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.4+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "solid.fillet",+ "params": {+ "edges": [+ [+ 100,+ 60,+ 1+ ]+ ],+ "radius": 10+ }+ },+ {+ "command": "sheet.flat_pattern",+ "params": {}+ }+ ]+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/expected.json b/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/expected.jsonnew file mode 100644index 0000000000..4e15519436--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/expected.json@@ -0,0 +1,11 @@+{+ "sources": [+ "tangency-labs/solidcraft#3353",+ "tangency-labs/solidcraft#3354"+ ],+ "what": "a sheet metal body mirrored into a new body must still be sheet metal (flat pattern, bend table): it was a plain solid",+ "source": "analytic",+ "method": "T = 2, R = 2, K = 0.4, setback 4. One body: base 100 x 52, flanges 20 and 15 high (straights 16 and 11), all 100 wide, 2 thick, two bends of (pi/2)(16 - 4)*100/2 = 942.478 each, a 10 mm hole through the base (pi*25*2). V1 = 2*100*(52 + 16 + 11) + 2*942.478 - 50*pi. The mirror copy is congruent: two bodies, total 2*V1. The flat pattern of the copy must exist",+ "body_count": 2,+ "volume_mm3": 35055.75191894878+}\ No newline at end of filediff --git a/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/recipe.json b/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/recipe.jsonnew file mode 100644index 0000000000..e0b587e2e1--- /dev/null+++ b/tests/kernel-cases/sheet-metal/3353-mirrored-sheet-body-keeps-its-flat-pattern/recipe.json@@ -0,0 +1,122 @@+{+ "commands": [+ {+ "command": "sheet.manage_rules",+ "params": {+ "name": "S",+ "thickness": "2 mm",+ "active": true,+ "bend_radius": "2 mm",+ "k_factor": 0.4+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Base"+ }+ },+ {+ "command": "sketch.rectangle.two_point",+ "params": {+ "p0": [+ 0,+ 0+ ],+ "p1": [+ 100,+ 60+ ]+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "base",+ "sketch": "Base"+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 50,+ 0,+ 2+ ]+ ],+ "height": 20+ }+ },+ {+ "command": "sheet.flange",+ "params": {+ "type": "edge",+ "edges": [+ [+ 50,+ 60,+ 2+ ]+ ],+ "height": 15+ }+ },+ {+ "command": "sketch.create",+ "params": {+ "plane": "XY",+ "name": "Hole"+ }+ },+ {+ "command": "sketch.circle.center",+ "params": {+ "center": [+ 50,+ 30+ ],+ "radius": 5+ }+ },+ {+ "command": "sketch.finish",+ "params": {}+ },+ {+ "command": "solid.extrude",+ "params": {+ "sketch": "Hole",+ "through_all": true,+ "direction": "symmetric",+ "operation": "cut"+ }+ },+ {+ "command": "solid.mirror",+ "params": {+ "bodies": [+ "Body1"+ ],+ "plane": "YZ"+ }+ },+ {+ "command": "sheet.flat_pattern",+ "params": {+ "body": "Body1 (2)"+ }+ },+ {+ "command": "inspect.measure",+ "params": {}+ }+ ]+}\ No newline at end of file