Skip to content

SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.

Wave 416/509: Kernel rig: everyday chamfers of box edges and pocket rims (and 3 more)

jyvikoe790c6428d63
diff --git a/crates/kernel/src/issue_324_tests.rs b/crates/kernel/src/issue_324_tests.rs
deleted file mode 100644
index b05f442644..0000000000
--- a/crates/kernel/src/issue_324_tests.rs
+++ /dev/null
@@ -1,46 +0,0 @@
-//! #324: a round on a block's top edge that runs over a through hole: built as if the top went
-//! on, and cut by the hole.
-
-use solidcraft_geom::Vec3;
-
-use crate::{Body, BoolOp, build::box_solid, build::cylinder, ops::boolean};
-
-/// A 40 x 20 x 10 block with a through hole of radius 3 at (20, `y`).
-fn block_with_hole(y: f64) -> Body {
- let block = box_solid(Vec3::new(0.0, 0.0, 0.0), Vec3::new(40.0, 20.0, 10.0)).unwrap();
- let hole = cylinder(Vec3::new(20.0, y, -1.0), Vec3::Z, 3.0, 12.0).unwrap();
- boolean(&block, &hole, BoolOp::Cut).unwrap().unwrap()
-}
-
-/// The round on the top edge at y = 20 covers the top face from y = 20 - r, and the hole's
-/// wall reaches y = 17.5: a radius over 2.5 runs into the hole. R4 is built as if the top went
-/// on over the hole and cut from the block (the blend-overflow decision, 237f0ae74): the round
-/// takes 16 (1 - π/4) of the section along 40, less its part over the hole, where the round's
-/// height above its arc, 4 - √(16 - (y - 16)²), stands over the hole's width
-/// 2 √(9 - (y - 14.5)²) for y in [16, 17.5] (integrated with y = 17.5 - s², smooth in s).
-#[test]
-fn a_round_into_a_hole_is_cut_by_it() {
- use std::f64::consts::{FRAC_PI_4, PI};
- let b = block_with_hole(14.5);
- let edge = Vec3::new(10.0, 20.0, 10.0);
- let r = crate::fillet(&b, &[edge], 4.0).unwrap();
- assert!(r.validity().is_empty(), "{:?}", r.validity());
- let (n, top) = (20000, 1.5f64.sqrt());
- let over: f64 = (0..n)
- .map(|i| {
- let s = (i as f64 + 0.5) * top / n as f64;
- let y = 17.5 - s * s;
- 2.0 * (9.0 - (y - 14.5).powi(2)).sqrt() * (4.0 - (16.0 - (y - 16.0).powi(2)).sqrt()) * 2.0 * s
- })
- .sum::<f64>()
- * top
- / n as f64;
- let want = 8000.0 - PI * 9.0 * 10.0 - (40.0 * 16.0 * (1.0 - FRAC_PI_4) - over);
- let v = crate::measure(&r).unwrap().volume;
- assert!((v - want).abs() < 1e-7 * want, "{v} against {want}");
- // Clear of the hole (up to 2.5) the round keeps its whole section.
- let r = crate::fillet(&b, &[edge], 2.5).unwrap();
- let want = 8000.0 - PI * 9.0 * 10.0 - 40.0 * 2.5 * 2.5 * (1.0 - FRAC_PI_4);
- let v = r.volume_at(0.005).unwrap();
- assert!((v - want).abs() < 0.05, "{v} against {want}");
-}
diff --git a/crates/kernel/src/lib.rs b/crates/kernel/src/lib.rs
index eca49fd84d..e7a42d9354 100644
--- a/crates/kernel/src/lib.rs
+++ b/crates/kernel/src/lib.rs
@@ -62,8 +62,6 @@ mod issue_1510_tests;
#[cfg(test)]
mod issue_2005_tests;
#[cfg(test)]
-mod issue_324_tests;
-#[cfg(test)]
mod issue_616_tests;
#[cfg(test)]
mod issue_674_tests;
diff --git a/crates/kernel/src/tests.rs b/crates/kernel/src/tests.rs
index 534322e7fb..2514924a6b 100644
--- a/crates/kernel/src/tests.rs
+++ b/crates/kernel/src/tests.rs
@@ -311,10 +311,32 @@ fn loop_fillet_as_tall_as_its_wall_consumes_it() {
let m = measure(&f).unwrap();
assert!(rel(m.volume, want) < 2e-4, "{} vs {want}", m.volume);
assert!(f.validity().is_empty(), "{:?}", f.validity());
- // Taller than the wall: still refused, the body unchanged.
+ // Taller than the wall the round overflows on its tangent side, past the wall's bottom
+ // edge: it is built on the wall continued down and cut from the disc (the owner's
+ // blend-overflow ruling, 2026-10-30), keeping its radius. Its section in (ρ, z) is the r
+ // square at the edge outside the circle about (13 − r, 2 − r), above z = 0: with
+ // t = z − (2 − r) = r sin θ and ρ(θ) = 13 − r + r cos θ the disc keeps
+ // π (169·2 − ∫ (169 − ρ²) dz), θ from asin((r − 2) / r) (957.692239 at r = 2.5).
+ let kept = |r: f64| {
+ let (n, lo) = (20000, ((r - 2.0) / r).asin());
+ let taken: f64 = (0..n)
+ .map(|i| {
+ let th = lo + (f64::from(i) + 0.5) * (PI / 2.0 - lo) / f64::from(n);
+ let rho = 13.0 - r + r * th.cos();
+ (169.0 - rho * rho) * r * th.cos()
+ })
+ .sum::<f64>()
+ * (PI / 2.0 - lo)
+ / f64::from(n);
+ PI * (169.0 * 2.0 - taken)
+ };
+ assert!(rel(kept(2.0), PI * 169.0 * 2.0 - spandrel(2.0).0 * 2.0 * PI * (13.0 - spandrel(2.0).1)) < 1e-9);
+ assert!((kept(2.5) - 957.692239).abs() < 1e-6, "{}", kept(2.5));
for r in [2.0 + 1e-3, 2.5] {
- let e = fillet(&disc, &[Vec3::new(0.0, 13.0, 2.0), Vec3::new(0.0, -13.0, 2.0)], r).unwrap_err();
- assert!(e.to_string().contains("taller than the walls"), "{r}: {e}");
+ let f = fillet(&disc, &[Vec3::new(0.0, 13.0, 2.0), Vec3::new(0.0, -13.0, 2.0)], r).unwrap_or_else(|e| panic!("{r}: {e}"));
+ assert!(f.validity().is_empty(), "{r}: {:?}", f.validity());
+ let v = measure(&f).unwrap().volume;
+ assert!(rel(v, kept(r)) < 1e-6, "{r}: {v} vs {}", kept(r));
}
}
@@ -2067,8 +2089,8 @@ fn fillet_mixed_arc_and_line_removed_volume_converges() {
}
let blended = fillet(&body, &[Vec3::new(0.0, 10.0, 15.0), Vec3::new(5.0, 0.0, 15.0)], r).unwrap();
// The removal from the exact volumes (SMLib's, to 1e-8): the reference to a hundred
- // thousandth (the blend's surfaces are SMLib's fits; their section error is
- // fillet_mixed_arc_and_line_joint_preserves_both_section_radii's).
+ // thousandth (the blend's surfaces are SMLib's fits; the rig's
+ // fillets/485-fillet-d-prism-top-outline-arc-and-flat grades the same round).
let done = measure(&blended).unwrap();
let exact = source.volume - done.volume;
assert!(rel(exact, want) < 1e-5, "r={r}: removed {exact}, expected {want}");
@@ -2082,42 +2104,6 @@ fn fillet_mixed_arc_and_line_removed_volume_converges() {
}
}
-#[test]
-fn fillet_mixed_arc_and_line_joint_preserves_both_section_radii() {
- let r = 0.5;
- let body = mixed_arc_and_line_prism();
- let blended = fillet(&body, &[Vec3::new(0.0, 10.0, 15.0), Vec3::new(5.0, 0.0, 15.0)], r).unwrap();
- crate::guard("inspect mixed fillet mitres", || {
- let rec = blended.record();
- let mut mitres = std::collections::HashSet::new();
- for (id, edge) in rec.edges.iter().enumerate() {
- let a = Vec3::from(rec.vertices[edge.vertices[0] as usize].point);
- let b = Vec3::from(rec.vertices[edge.vertices[1] as usize].point);
- // Only the two corner profiles join the top contact to the wall contact.
- if (a.z - b.z).abs() < r - 1e-8 || a.z.min(b.z) < 15.0 - r - 1e-8 || a.x * b.x <= 0.0 {
- continue;
- }
- if !mitres.insert(id) {
- continue;
- }
- let curve = solidcraft_geom::brep::eval::CurveEval::new(edge.parameters()).unwrap();
- let [lo, hi] = edge.interval;
- for i in 0..=257 {
- let p = curve.point(lo + (hi - lo) * f64::from(i) / 257.0).unwrap();
- // The joint lies on both the cylindrical line blend and the toroidal
- // arc blend, not their tangent-plane approximation.
- let radius2 = (p.y - r).powi(2) + (p.z - (15.0 - r)).powi(2);
- assert!((radius2 - r * r).abs() < 1e-7, "distorted line section at {p:?}: radius squared {radius2}");
- let radius2 = (p.x.hypot(p.y) - (10.0 - r)).powi(2) + (p.z - (15.0 - r)).powi(2);
- assert!((radius2 - r * r).abs() < 1e-7, "distorted arc section at {p:?}: radius squared {radius2}");
- }
- }
- assert_eq!(mitres.len(), 2, "both arc/line corners must be checked");
- Ok(())
- })
- .unwrap();
-}
-
#[test]
fn fillet_partial_mixed_arc_and_line_perimeter_run() {
let body = partial_mixed_run_prism();
diff --git a/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/expected.json b/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/expected.json
new file mode 100644
index 0000000000..0c3223649b
--- /dev/null
+++ b/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/expected.json
@@ -0,0 +1,13 @@
+{
+ "sources": [
+ "tangency-labs/solidcraft#324"
+ ],
+ "what": "324-fillet-over-hole-overlap with the hole cut by a cylinder longer than the block (z -1 to 11), so the hole's wall is trimmed by both the top and the bottom face",
+ "source": "analytic",
+ "method": "the same body as 324-fillet-over-hole-overlap: block 40x20x10 minus a through hole of r=3 centred (20,14.5), then R4 on the top long edge at y=20. The round covers y=16..20 and removes 40*(16-4pi) = 137.35; the hole removes 9*pi*10 = 282.74; where both remove the same material (y in 16..17.5) add it back: overlap = integral over y from 16 to 17.5 of [4 - sqrt(16-(y-16)^2)] x 2 sqrt(9-(y-14.5)^2) dy = 0.3758. V = 8000 - 9*pi*10 - 40*(16-4*pi) + overlap = 7580.287.",
+ "body_count": 1,
+ "volume_mm3": 7580.287315360674,
+ "continuity": {
+ "order": "g1"
+ }
+}
diff --git a/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/recipe.json b/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/recipe.json
new file mode 100644
index 0000000000..2b6811b8a1
--- /dev/null
+++ b/tests/kernel-cases/fillets/324-fillet-over-hole-cut-by-overlong-cylinder/recipe.json
@@ -0,0 +1,44 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "corner": [
+ 0,
+ 0,
+ 0
+ ],
+ "length": 40,
+ "width": 20,
+ "height": 10,
+ "body_name": "Block"
+ }
+ },
+ {
+ "command": "solid.cylinder",
+ "params": {
+ "base": [
+ 20,
+ 14.5,
+ -1
+ ],
+ "radius": 3,
+ "height": 12,
+ "operation": "cut"
+ }
+ },
+ {
+ "command": "solid.fillet",
+ "params": {
+ "edges": [
+ [
+ 10,
+ 20,
+ 10
+ ]
+ ],
+ "radius": "4 mm"
+ }
+ }
+ ]
+}
diff --git a/tests/kernel-cases/fillets/KNOWN_FAILING b/tests/kernel-cases/fillets/KNOWN_FAILING
index 170fc6f1ea..357e91a399 100644
--- a/tests/kernel-cases/fillets/KNOWN_FAILING
+++ b/tests/kernel-cases/fillets/KNOWN_FAILING
@@ -8,6 +8,8 @@
9-fillet-corner-curvature-with-reduce-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
9-fillet-corner-curvature-with-taper-fit not supported yet: solid.fillet builds corner g2 with the exact fit only
every-block-cylinder-crease-top-edge-after-arc-round-r1 the r1 round's contact seam with the block's side face reads 60 degrees (the cylinder wall's normal) at its end on the crease (8.660, 5, 15.284): G0 where the round is built tangent
+every-chamfer-pocket-rim-5-5-refused refused naming 5 mm as the largest distance: the full-width chamfer (legs as deep as the 5 mm walls) builds instead of being refused
+every-chamfer-pocket-rim-5-full-depth-refused the full-width chamfer (legs as deep as the 5 mm walls) builds instead of being refused
every-hole-top-rim-chamfer-10-full-depth-refused the full-width chamfer (leg as deep as the 10 mm plate) builds instead of being refused
every-hole-top-rim-r12-past-plate-bottom SMLib status 1001: a convex round past its face on the tangent side is not yet built by subtraction
every-pocket-floor-and-rim-edges-r2 a corner patch where two rim rounds meet at each concave pocket corner (23 faces, not 19) instead of the mitre the rounds make running into each other
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-2/expected.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-2/expected.json
new file mode 100644
index 0000000000..212499504d
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-2/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [],
+ "what": "a box's top front edge chamfered 2",
+ "source": "analytic",
+ "method": "box 40x30x20, the edge y=0, z=20 chamfered 2: the right triangle of legs 2 (area 2) along 40: V = 24000 - 80 = 23920. Faces 7; creases (G0).",
+ "body_count": 1,
+ "volume_mm3": 23920.0,
+ "faces": 7,
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 40,
+ 30,
+ 20
+ ]
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-2/recipe.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-2/recipe.json
new file mode 100644
index 0000000000..c12606a097
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-2/recipe.json
@@ -0,0 +1,26 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 30,
+ "height": 20,
+ "body_name": "Part"
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 20,
+ 0,
+ 20
+ ]
+ ],
+ "distance": 2
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/expected.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/expected.json
new file mode 100644
index 0000000000..a50c8cbe39
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/expected.json
@@ -0,0 +1,20 @@
+{
+ "sources": [],
+ "what": "a box's top front edge chamfered by two distances, flipped: 3 down the front and 1 along the top",
+ "source": "analytic",
+ "method": "as every-chamfer-box-edge-two-distances-3-1 with `flip`: the front face first, so the triangle (0,20), (1,20), (0,17), area 1.5, V = 23940, its centroid (1/3, 19): centre of mass (20, (360000 - 20)/23940, (240000 - 60 * 19)/23940), graded to 0.0005 mm. Faces 7.",
+ "body_count": 1,
+ "volume_mm3": 23940.0,
+ "faces": 7,
+ "center_of_mass": [
+ 20.0,
+ 15.036758563074352,
+ 9.977443609022556
+ ],
+ "tolerance": {
+ "abs_mm": 0.0005
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/recipe.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/recipe.json
new file mode 100644
index 0000000000..1b08099fe0
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1-flipped/recipe.json
@@ -0,0 +1,28 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 30,
+ "height": 20,
+ "body_name": "Part"
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 20,
+ 0,
+ 20
+ ]
+ ],
+ "distance": 3,
+ "distance2": 1,
+ "flip": true
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/expected.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/expected.json
new file mode 100644
index 0000000000..368ed1ff6a
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/expected.json
@@ -0,0 +1,20 @@
+{
+ "sources": [],
+ "what": "a box's top front edge chamfered by two distances: 3 along the top (the first face, the one facing up) and 1 down the front",
+ "source": "analytic",
+ "method": "box 40x30x20, the edge y=0, z=20: the triangle (0,20), (3,20), (0,19) in (y,z), area 1.5, along 40: V = 24000 - 60 = 23940. Its centroid (1, 59/3) fixes which leg went where: centre of mass (20, (360000 - 60)/23940, (240000 - 60 * 59/3)/23940), graded to 0.0005 mm (flipped, it moves 0.0017 mm in y and z). Faces 7.",
+ "body_count": 1,
+ "volume_mm3": 23940.0,
+ "faces": 7,
+ "center_of_mass": [
+ 20.0,
+ 15.035087719298245,
+ 9.97577276524645
+ ],
+ "tolerance": {
+ "abs_mm": 0.0005
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/recipe.json b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/recipe.json
new file mode 100644
index 0000000000..ac7839d2da
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-box-edge-two-distances-3-1/recipe.json
@@ -0,0 +1,27 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 40,
+ "width": 30,
+ "height": 20,
+ "body_name": "Part"
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 20,
+ 0,
+ 20
+ ]
+ ],
+ "distance": 3,
+ "distance2": 1
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/expected.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/expected.json
new file mode 100644
index 0000000000..82db428b75
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [],
+ "what": "a rectangular pocket's four rim edges chamfered 1",
+ "source": "analytic",
+ "method": "plate 60x40x10 with the pocket 30x20x5 (x 15..45, y 10..30, floor z = 5, sharp vertical corners): V0 = 24000 - 3000 = 21000. Each convex rim edge loses the triangle d^2/2 along its length (100 in all); at each pocket corner the two chamfers run on past it and meet in a mitre, the quadrant losing what both remove: points (s, t) past both walls with s + u < d and t + u < d (u the depth), int_0^d (d-u)^2 du = d^3/3. d = 1: removed = 50 d^2 + (4/3) d^3 = 51.3333. V = 20948.6667. Faces 15.",
+ "body_count": 1,
+ "volume_mm3": 20948.666666666668,
+ "faces": 15,
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 60,
+ 40,
+ 10
+ ]
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/recipe.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/recipe.json
new file mode 100644
index 0000000000..e4a9f007e6
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-1/recipe.json
@@ -0,0 +1,58 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10,
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 30,
+ "width": 20,
+ "height": 6,
+ "corner": [
+ 15,
+ 10,
+ 5
+ ],
+ "operation": "cut",
+ "targets": [
+ "Plate"
+ ]
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 30,
+ 10,
+ 10
+ ],
+ [
+ 30,
+ 30,
+ 10
+ ],
+ [
+ 15,
+ 20,
+ 10
+ ],
+ [
+ 45,
+ 20,
+ 10
+ ]
+ ],
+ "distance": 1
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/expected.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/expected.json
new file mode 100644
index 0000000000..8f7ff1d448
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [],
+ "what": "a 5 mm deep pocket's rim edges chamfered 4.9: the legs stop 0.1 short of the floor, so it fits",
+ "source": "analytic",
+ "method": "plate 60x40x10 with the pocket 30x20x5 (x 15..45, y 10..30, floor z = 5, sharp vertical corners): V0 = 24000 - 3000 = 21000. Each convex rim edge loses the triangle d^2/2 along its length (100 in all); at each pocket corner the two chamfers run on past it and meet in a mitre, the quadrant losing what both remove: points (s, t) past both walls with s + u < d and t + u < d (u the depth), int_0^d (d-u)^2 du = d^3/3. d = 4.9: removed = 50 d^2 + (4/3) d^3 = 1357.3653. V = 19642.6347. Faces 15.",
+ "body_count": 1,
+ "volume_mm3": 19642.634666666665,
+ "faces": 15,
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 60,
+ 40,
+ 10
+ ]
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/recipe.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/recipe.json
new file mode 100644
index 0000000000..7c8c57b32c
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-4-9-fits/recipe.json
@@ -0,0 +1,58 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10,
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 30,
+ "width": 20,
+ "height": 6,
+ "corner": [
+ 15,
+ 10,
+ 5
+ ],
+ "operation": "cut",
+ "targets": [
+ "Plate"
+ ]
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 30,
+ 10,
+ 10
+ ],
+ [
+ 30,
+ 30,
+ 10
+ ],
+ [
+ 15,
+ 20,
+ 10
+ ],
+ [
+ 45,
+ 20,
+ 10
+ ]
+ ],
+ "distance": 4.9
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/expected.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/expected.json
new file mode 100644
index 0000000000..0b13ada99d
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/expected.json
@@ -0,0 +1,8 @@
+{
+ "sources": [],
+ "what": "a 5 mm deep pocket's rim edges chamfered 5.5: the legs would run off the walls over the floor: refused, naming the largest distance that fits",
+ "source": "invariants",
+ "method": "owner rule: a chamfer whose leg runs off the face beside its edge over another face is refused, naming the largest size that fits, and a full-width chamfer stays refused. The walls are 5 deep, so every distance below 5 fits (every-chamfer-pocket-rim-4-9-fits) and 5 does not; the search names the largest at the request's three significant digits (step 0.001): 4.999.",
+ "outcome": "refused",
+ "refusal": "the largest distance that fits is 4.999 mm"
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/recipe.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/recipe.json
new file mode 100644
index 0000000000..c4aa23aa11
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-5-refused/recipe.json
@@ -0,0 +1,58 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10,
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 30,
+ "width": 20,
+ "height": 6,
+ "corner": [
+ 15,
+ 10,
+ 5
+ ],
+ "operation": "cut",
+ "targets": [
+ "Plate"
+ ]
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 30,
+ 10,
+ 10
+ ],
+ [
+ 30,
+ 30,
+ 10
+ ],
+ [
+ 15,
+ 20,
+ 10
+ ],
+ [
+ 45,
+ 20,
+ 10
+ ]
+ ],
+ "distance": 5.5
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/expected.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/expected.json
new file mode 100644
index 0000000000..5e695113ee
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/expected.json
@@ -0,0 +1,8 @@
+{
+ "sources": [],
+ "what": "a 5 mm deep pocket's rim edges chamfered 5: the legs would use the whole walls: refused, naming the largest distance that fits",
+ "source": "invariants",
+ "method": "owner rule: a chamfer whose leg runs off the face beside its edge over another face is refused, naming the largest size that fits, and a full-width chamfer stays refused. The walls are 5 deep, so every distance below 5 fits (every-chamfer-pocket-rim-4-9-fits) and 5 does not; the search names the largest at the request's three significant digits (step 0.001): 4.999.",
+ "outcome": "refused",
+ "refusal": "the largest distance that fits is 4.999 mm"
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/recipe.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/recipe.json
new file mode 100644
index 0000000000..2bfec181e2
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-5-full-depth-refused/recipe.json
@@ -0,0 +1,58 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10,
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 30,
+ "width": 20,
+ "height": 6,
+ "corner": [
+ 15,
+ 10,
+ 5
+ ],
+ "operation": "cut",
+ "targets": [
+ "Plate"
+ ]
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 30,
+ 10,
+ 10
+ ],
+ [
+ 30,
+ 30,
+ 10
+ ],
+ [
+ 15,
+ 20,
+ 10
+ ],
+ [
+ 45,
+ 20,
+ 10
+ ]
+ ],
+ "distance": 5
+ }
+ }
+ ]
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/expected.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/expected.json
new file mode 100644
index 0000000000..9caa1122b1
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/expected.json
@@ -0,0 +1,24 @@
+{
+ "sources": [],
+ "what": "a rectangular pocket's rim edges chamfered by two distances: 2 along the top (facing up) and 1 down the walls",
+ "source": "analytic",
+ "method": "plate 60x40x10 with the pocket 30x20x5 (x 15..45, y 10..30, floor z = 5, sharp vertical corners): V0 = 24000 - 3000 = 21000. Each rim edge loses the triangle of legs 2 (on the top) and 1 (down the wall), area 1, along 100; at each corner the mitred quadrant loses the points past both walls with s/2 + u < 1 and t/2 + u < 1: int_0^1 (2 (1-u))^2 du = 4/3. Removed = 100 + 16/3 = 105.3333. V = 20894.6667. Faces 15.",
+ "body_count": 1,
+ "volume_mm3": 20894.666666666668,
+ "faces": 15,
+ "bbox": {
+ "min": [
+ 0,
+ 0,
+ 0
+ ],
+ "max": [
+ 60,
+ 40,
+ 10
+ ]
+ },
+ "continuity": {
+ "order": "g0"
+ }
+}
\ No newline at end of file
diff --git a/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/recipe.json b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/recipe.json
new file mode 100644
index 0000000000..2159a83dad
--- /dev/null
+++ b/tests/kernel-cases/fillets/every-chamfer-pocket-rim-two-distances-2-1/recipe.json
@@ -0,0 +1,59 @@
+{
+ "commands": [
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 60,
+ "width": 40,
+ "height": 10,
+ "body_name": "Plate"
+ }
+ },
+ {
+ "command": "solid.box",
+ "params": {
+ "length": 30,
+ "width": 20,
+ "height": 6,
+ "corner": [
+ 15,
+ 10,
+ 5
+ ],
+ "operation": "cut",
+ "targets": [
+ "Plate"
+ ]
+ }
+ },
+ {
+ "command": "solid.chamfer",
+ "params": {
+ "edges": [
+ [
+ 30,
+ 10,
+ 10
+ ],
+ [
+ 30,
+ 30,
+ 10
+ ],
+ [
+ 15,
+ 20,
+ 10
+ ],
+ [
+ 45,
+ 20,
+ 10
+ ]
+ ],
+ "distance": 2,
+ "distance2": 1
+ }
+ }
+ ]
+}
\ No newline at end of file