SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Fillets and chamfers along open chains of curved edges that end at planar faces square to them (the round edge of a D-shaped block): the end faces take the blend's end arcs and their edges stop at the contacts; the curved blend is tried only for curved edges or edges between curved faces, and refuses a blend larger than its neighbouring faces
bherbruckf7703ca720ac
diff --git a/ROADMAP.md b/ROADMAP.mdindex 629c5616c1..8a58e2c2e3 100644--- a/ROADMAP.md+++ b/ROADMAP.md@@ -62,8 +62,8 @@ headline counts in-scope tabs only and lists the deferred ones separately.rounded corners rounded again (sphere octants, tori at concave corners); every edge of aconvex planar body or of an extruded part; fillets inside patterns; closed chains of curvededges between any two smooth sides (a branch pipe on a main pipe), by a rolling ball (the- blend a rational B-spline through exact arcs). Open chains of curved edges are not supported- yet.+ blend a rational B-spline through exact arcs), closed or ending at planar faces square to the+ edges.- Booleans: prisms along one direction (plates with holes, slots, patterns of them, equalsections stacked end to end) are combined exactly in 2D; bodies touching along one whole face(a part and its mirror image) are stitched; coincident planar faces are pushed apart whendiff --git a/crates/kernel/src/blend.rs b/crates/kernel/src/blend.rsindex c70867a998..d9714194e4 100644--- a/crates/kernel/src/blend.rs+++ b/crates/kernel/src/blend.rs@@ -341,7 +341,8 @@ fn blend(body: &Body, edges: &[Vec3], r: f64, shape: Shape, what: &str) -> Resullet edge = Body::unique_edges(&solid).into_iter().nth(idx).ok_or_else(|| KernelError::Invalid("edge index".into()))?;let out = match guard(what, || blend_one(&solid, &edge, size, r, shape)) {Ok(o) => o,- // A curved edge: roll a ball along its smooth closed chain.+ // A curved edge, or one between curved faces: roll a ball along its smooth chain.+ Err(e) if !curved_case(&solid, &edge) => return Err(e),Err(e) => match smooth_chain(&solid, &edge) {Some(ids) => guard(what, || crate::curveblend::curve_blend(&solid, &ids, size, r, shape == Shape::Round)).map_err(|e2| KernelError::Failed(format!("{e2} ({e})")))?,@@ -353,7 +354,16 @@ fn blend(body: &Body, edges: &[Vec3], r: f64, shape: Shape, what: &str) -> ResulOk(cur)}-/// The closed chain of edges continuing `edge` smoothly at both ends (its ids), if any.+/// Is the edge curved, or does it lie between faces that aren't both planar?+fn curved_case(solid: &Solid, edge: &mt::Edge) -> bool {+ if !matches!(edge.curve(), mt::Curve::Line(_)) {+ return true;+ }+ solid.face_iter().filter(|f| f.edge_iter().any(|e| e.id() == edge.id())).any(|f| !matches!(f.oriented_surface(), mt::Surface::Plane(_)))+}++/// The chain of edges continuing `edge` smoothly at its ends (its ids): closed, or open where+/// the next edge turns sharply.fn smooth_chain(solid: &Solid, edge: &mt::Edge) -> Option<Vec<mt::EdgeID>> {use mt::{BoundedCurve, ParametricCurve};let all = Body::unique_edges(solid);@@ -364,28 +374,34 @@ fn smooth_chain(solid: &Solid, edge: &mt::Edge) -> Option<Vec<mt::EdgeID>> {Vec3::new(d.x, d.y, d.z).normalized()};let mut ids = vec![edge.id()];- let start = edge.front().clone();- let (mut v, mut d) = (edge.back().clone(), dir(edge, true)?);- for _ in 0..200 {- if v == start {- return Some(ids);- }- let next = all.iter().filter(|e| !ids.contains(&e.id()) && (*e.front() == v || *e.back() == v)).find_map(|e| {- let fwd = *e.front() == v;- let t = if fwd { dir(e, false)? } else { -dir(e, true)? };- (t.dot(d) > 1.0 - 1e-4).then(|| (e.clone(), fwd))- });- let (e, fwd) = next?;- ids.push(e.id());- if fwd {- v = e.back().clone();- d = dir(&e, true)?;- } else {- v = e.front().clone();- d = -dir(&e, false)?;+ // Walk on from one end of the edge (leaving vertex `v` in direction `d`).+ let walk = |mut v: mt::Vertex, mut d: Vec3, ids: &mut Vec<mt::EdgeID>, stop: &mt::Vertex| -> Option<bool> {+ for _ in 0..200 {+ if v == *stop {+ return Some(true);+ }+ let next = all.iter().filter(|e| !ids.contains(&e.id()) && (*e.front() == v || *e.back() == v)).find_map(|e| {+ let fwd = *e.front() == v;+ let t = if fwd { dir(e, false)? } else { -dir(e, true)? };+ (t.dot(d) > 1.0 - 1e-4).then(|| (e.clone(), fwd))+ });+ let Some((e, fwd)) = next else { return Some(false) };+ ids.push(e.id());+ if fwd {+ v = e.back().clone();+ d = dir(&e, true)?;+ } else {+ v = e.front().clone();+ d = -dir(&e, false)?;+ }}+ None+ };+ let closed = walk(edge.back().clone(), dir(edge, true)?, &mut ids, edge.front())?;+ if !closed {+ walk(edge.front().clone(), -dir(edge, false)?, &mut ids, edge.back())?;}- None+ Some(ids)}fn edge_mid(e: &mt::Edge) -> Option<Vec3> {diff --git a/crates/kernel/src/curveblend.rs b/crates/kernel/src/curveblend.rsindex b592f5c118..e98a321000 100644--- a/crates/kernel/src/curveblend.rs+++ b/crates/kernel/src/curveblend.rs@@ -116,20 +116,37 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,let mut seen = std::collections::HashSet::new();shell.edge_iter().filter(|e| ids.contains(&e.id()) && seen.insert(e.id())).map(|e| e.absolute_clone()).collect()};- let first = all.first().cloned().ok_or_else(|| KernelError::Failed("no edges".into()))?;+ // An open chain starts at a vertex only one of its edges touches.+ let uses = |v: &mt::Vertex| all.iter().filter(|e| e.front() == v || e.back() == v).count();+ let first = match all.iter().find_map(|e| {+ if uses(e.front()) == 1 {+ Some(e.clone())+ } else if uses(e.back()) == 1 {+ Some(e.inverse())+ } else {+ None+ }+ }) {+ Some(e) => e,+ None => all.first().cloned().ok_or_else(|| KernelError::Failed("no edges".into()))?,+ };chain.push(first.clone());while chain.len() < all.len() {let end = chain.last().map(|e| e.back().clone()).ok_or_else(|| KernelError::Failed("chain".into()))?;let next = all.iter().find(|e| !chain.iter().any(|c| c.id() == e.id()) && (*e.front() == end || *e.back() == end))- .ok_or_else(|| unsupported("the edges don't form one closed chain"))?;+ .ok_or_else(|| unsupported("the edges don't form one chain"))?;chain.push(if *next.front() == end { next.clone() } else { next.inverse() });}- if chain.first().map(|e| e.front().clone()) != chain.last().map(|e| e.back().clone()) {- return Err(unsupported("blending an open chain of curved edges"));- }+ let closed = chain.first().map(|e| e.front().clone()) == chain.last().map(|e| e.back().clone());let n = chain.len();+ // The chain's vertices (n for a closed chain, n + 1 for an open one).+ let mut verts: Vec<mt::Vertex> = chain.iter().map(|e| e.front().clone()).collect();+ if !closed && let Some(e) = chain.last() {+ verts.push(e.back().clone());+ }+ let nv = verts.len();// Faces of each edge, split into the two sides.let faces_of = |e: &mt::Edge| -> Vec<usize> {(0..faces.len()).filter(|i| faces.get(*i).is_some_and(|f| f.edge_iter().any(|x| x.id() == e.id()))).collect()@@ -186,25 +203,39 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,}// Seams at the chain's vertices: edges there that aren't in the chain, and their side.let chain_ids: Vec<mt::EdgeID> = chain.iter().map(|e| e.id()).collect();- let mut seams: Vec<Vec<(usize, mt::Edge)>> = Vec::with_capacity(n);- for e in &chain {- let v = e.front().clone();+ let mut seams: Vec<Vec<(usize, mt::Edge)>> = Vec::with_capacity(nv);+ // At an open chain's ends: the end face (planar, square to the edge there).+ let mut end_faces: Vec<(usize, usize)> = Vec::new(); // (vertex index, face index)+ for (k, v) in verts.iter().enumerate() {+ let at_end = !closed && (k == 0 || k == nv - 1);+ let (k1, k2) = {+ let ei = if k == nv - 1 && !closed { n - 1 } else { k.min(n - 1) };+ (side1.get(ei).copied().unwrap_or(usize::MAX), side2.get(ei).copied().unwrap_or(usize::MAX))+ };let mut found: Vec<(usize, mt::Edge)> = Vec::new();for (fi, f) in faces.iter().enumerate() {+ if !f.vertex_iter().any(|x| x == *v) {+ continue;+ }+ let on_side = side1.contains(&fi) || side2.contains(&fi);+ if !on_side {+ if !at_end || end_faces.iter().any(|(kk, _)| *kk == k) {+ return Err(unsupported("a vertex of the edge chain where other faces meet"));+ }+ end_faces.push((k, fi));+ continue;+ }for x in f.edge_iter() {- if chain_ids.contains(&x.id()) || !(*x.front() == v || *x.back() == v) || found.iter().any(|(_, y)| y.id() == x.id()) {+ if chain_ids.contains(&x.id()) || !(*x.front() == *v || *x.back() == *v) || found.iter().any(|(_, y)| y.id() == x.id()) {continue;}- let side = if side1.contains(&fi) {- 1- } else if side2.contains(&fi) {- 2- } else {- return Err(unsupported("a vertex of the edge chain where other faces meet"));- };+ let side = if fi == k1 || (side1.contains(&fi) && fi != k2) { 1 } else { 2 };found.push((side, x.absolute_clone()));}}+ if at_end && !end_faces.iter().any(|(kk, _)| *kk == k) {+ return Err(unsupported("an open chain of curved edges must end at a face"));+ }// At most one seam per side.if found.iter().filter(|x| x.0 == 1).count() > 1 || found.iter().filter(|x| x.0 == 2).count() > 1 {return Err(unsupported("a vertex of the edge chain where several seams meet"));@@ -220,11 +251,33 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,let d = c.der(t);Some((from_p3(c.subs(t)), Vec3::new(d.x, d.y, d.z).normalized()?))};- let mut vsec: Vec<Section> = Vec::with_capacity(n);- for (k, e) in chain.iter().enumerate() {- let (p, t) = tangent_at(e, 0.0).ok_or_else(|| KernelError::Failed("tangent".into()))?;+ let mut vsec: Vec<Section> = Vec::with_capacity(nv);+ for k in 0..nv {+ let (p, t) = if k < n {+ tangent_at(chain.get(k).ok_or_else(|| KernelError::Failed("edge".into()))?, 0.0)+ } else {+ tangent_at(chain.get(n - 1).ok_or_else(|| KernelError::Failed("edge".into()))?, 1.0)+ }+ .ok_or_else(|| KernelError::Failed("tangent".into()))?;let here = seams.get(k).cloned().unwrap_or_default();- let extra = match here.first().cloned() {+ let at_end = end_faces.iter().any(|(kk, _)| *kk == k);+ if at_end {+ // The end face must be square to the edge: the blend's end then lies in it.+ let (_, fi) = end_faces.iter().find(|(kk, _)| *kk == k).copied().unwrap_or_default();+ let g = faces.get(fi).ok_or_else(|| KernelError::Failed("end face".into()))?;+ let ng = match g.oriented_surface() {+ mt::Surface::Plane(pl) => {+ let m = pl.normal();+ Vec3::new(m.x, m.y, m.z).normalized()+ }+ _ => None,+ }+ .ok_or_else(|| unsupported("the faces at the ends of the edges must be planar"))?;+ if ng.dot(t).abs() < 1.0 - 1e-6 {+ return Err(unsupported("the faces at the ends of the edges must be square to them"));+ }+ }+ let extra = match here.first().cloned().filter(|_| !at_end) {None => None,Some((side, seam)) => {// The plane through the seam square to that side's surface.@@ -241,7 +294,7 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,};let s = solve(&s1, &s2, p, t, r, sigma, extra, tol * 100.0).ok_or_else(|| unsupported("the ball doesn't fit along the edge"))?;// A seam on the other side too must pass through that side's contact.- if let Some((side, seam)) = here.get(1) {+ if let Some((side, seam)) = here.get(1).filter(|_| !at_end) {let q = if *side == 1 { s.q1 } else { s.q2 };let (a, b) = (from_p3(seam.front().point()), from_p3(seam.back().point()));if !matches!(seam.curve(), mt::Curve::Line(_)) || q.dist_to_segment(a, b) > tol * 1e3 {@@ -257,7 +310,7 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,let (p, t) = tangent_at(e, j as f64 / (SAMPLES - 1) as f64).ok_or_else(|| KernelError::Failed("tangent".into()))?;list.push(solve(&s1, &s2, p, t, r, sigma, None, tol * 100.0).ok_or_else(|| unsupported("the ball doesn't fit along the edge"))?);}- list.push(*vsec.get((k + 1) % n).ok_or_else(|| KernelError::Failed("section".into()))?);+ list.push(*vsec.get((k + 1) % nv).ok_or_else(|| KernelError::Failed("section".into()))?);esec.push(list);}crate::guard("curve blend", || {@@ -265,7 +318,7 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,// Vertices and arcs at the chain's vertices.let v1: Vec<mt::Vertex> = vsec.iter().map(|s| builder::vertex(p3(s.q1))).collect();let v2: Vec<mt::Vertex> = vsec.iter().map(|s| builder::vertex(p3(s.q2))).collect();- let mut arcs = Vec::with_capacity(n);+ let mut arcs = Vec::with_capacity(nv);for (k, s) in vsec.iter().enumerate() {let (a, b) = (v1.get(k).ok_or_else(|| fail("vertex"))?, v2.get(k).ok_or_else(|| fail("vertex"))?);let e = if round {@@ -283,7 +336,7 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,for (k, list) in esec.iter().enumerate() {let q1: Vec<Vec3> = list.iter().map(|s| s.q1).collect();let q2: Vec<Vec3> = list.iter().map(|s| s.q2).collect();- let k1 = (k + 1) % n;+ let k1 = (k + 1) % nv;let (a1, b1, a2, b2) = (v1.get(k), v1.get(k1), v2.get(k), v2.get(k1));let (Some(a1), Some(b1), Some(a2), Some(b2)) = (a1, b1, a2, b2) else { return Err(fail("vertex")) };let cv1 = crate::build::interpolate_cubic(&q1).ok_or_else(|| fail("contact curve"))?;@@ -293,14 +346,14 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,// The blend surface: each control row interpolated along the edge (homogeneous),// through two sections of each neighbouring edge too, so that neighbouring blend// faces meet smoothly.- let prev = esec.get((k + n - 1) % n).ok_or_else(|| fail("section"))?;- let next = esec.get(k1).ok_or_else(|| fail("section"))?;let mut ext: Vec<Section> = Vec::with_capacity(list.len() + 4);- if n > 1 || prev.len() > 3 {+ if closed || k > 0 {+ let prev = esec.get((k + n - 1) % n).ok_or_else(|| fail("section"))?;ext.extend(prev.iter().rev().skip(1).take(2).rev().copied());}ext.extend(list.iter().copied());- if n > 1 || next.len() > 3 {+ if closed || k + 1 < n {+ let next = esec.get((k + 1) % n).ok_or_else(|| fail("section"))?;ext.extend(next.iter().skip(1).take(2).copied());}let ctrl: Vec<[mt::Vector4; 3]> = ext.iter().map(|s| section_controls(s, round)).collect::<Option<_>>().ok_or_else(|| fail("section"))?;@@ -341,16 +394,82 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,let (Some(x), Some(y)) = (c1.get(k), c2.get(k)) else { return Err(fail("contact")) };subst.insert(e.id(), (x.clone(), y.clone()));}- let mut seam_subst: HashMap<mt::EdgeID, mt::Edge> = HashMap::new();+ // Seams get new ends at the contacts (an edge between two chain vertices at both).+ let mut ends: HashMap<mt::EdgeID, (mt::Edge, Option<mt::Vertex>, Option<mt::Vertex>)> = HashMap::new();for (k, sm) in seams.iter().enumerate().flat_map(|(k, l)| l.iter().map(move |x| (k, x))) {let (side, seam) = sm;- let v = chain.get(k).map(|e| e.front().clone()).ok_or_else(|| fail("vertex"))?;- let nv = if *side == 1 { v1.get(k) } else { v2.get(k) }.ok_or_else(|| fail("vertex"))?;- let ne = if *seam.front() == v { builder::line(nv, seam.back()) } else { builder::line(seam.front(), nv) };- seam_subst.insert(seam.id(), ne);+ let v = verts.get(k).cloned().ok_or_else(|| fail("vertex"))?;+ let nv = if *side == 1 { v1.get(k) } else { v2.get(k) }.ok_or_else(|| fail("vertex"))?.clone();+ let slot = ends.entry(seam.id()).or_insert_with(|| (seam.clone(), None, None));+ if *seam.front() == v {+ slot.1 = Some(nv);+ } else {+ slot.2 = Some(nv);+ }+ }+ let mut seam_subst: HashMap<mt::EdgeID, mt::Edge> = HashMap::new();+ for (id, (seam, a, b)) in ends {+ if !matches!(seam.curve(), mt::Curve::Line(_)) {+ return Err(unsupported("a curved edge where the blend ends"));+ }+ // The new ends must stay on the seam, in order, short of each other.+ let (p0, p1) = (from_p3(seam.front().point()), from_p3(seam.back().point()));+ let at = |v: &mt::Vertex| {+ let q = from_p3(v.point());+ let d = p1 - p0;+ ((q - p0).dot(d) / d.len2().max(1e-300), (q - p0 - d * ((q - p0).dot(d) / d.len2().max(1e-300))).len())+ };+ let (ta, oa) = a.as_ref().map(at).unwrap_or((0.0, 0.0));+ let (tb, ob) = b.as_ref().map(at).unwrap_or((1.0, 0.0));+ if oa > size * 1e-5 || ob > size * 1e-5 || ta < -1e-9 || tb > 1.0 + 1e-9 || tb - ta < 1e-6 {+ return Err(unsupported("the blend is larger than the neighbouring faces"));+ }+ let a = a.unwrap_or_else(|| seam.front().clone());+ let b = b.unwrap_or_else(|| seam.back().clone());+ seam_subst.insert(id, builder::line(&a, &b));}let mut out: Vec<mt::Face> = Vec::new();for (fi, f) in faces.iter().enumerate() {+ let corners: Vec<usize> = end_faces.iter().filter(|(_, g)| *g == fi).map(|(k, _)| *k).collect();+ if !corners.is_empty() {+ // The end face (one or both ends of the chain): its two edges at a chain end now+ // stop at the contacts, with the blend's end arc between them.+ let mut wires = Vec::new();+ for w in f.absolute_boundaries() {+ let mut es: Vec<mt::Edge> = Vec::new();+ for e in w.edge_iter() {+ let ne = match seam_subst.get(&e.id()) {+ Some(s) => {+ if e.front() == e.absolute_front() {+ s.clone()+ } else {+ s.inverse()+ }+ }+ None => e.clone(),+ };+ // Arriving at an old corner: continue along that end's arc.+ let arrives = corners.iter().copied().find(|k| verts.get(*k).is_some_and(|v| *e.back() == *v));+ es.push(ne.clone());+ if let Some(k) = arrives {+ let arc = arcs.get(k).ok_or_else(|| fail("arc"))?;+ let (a1, a2) = (v1.get(k).ok_or_else(|| fail("vertex"))?, v2.get(k).ok_or_else(|| fail("vertex"))?);+ let to = ne.back();+ let corner = if to == a1 {+ arc.clone()+ } else if to == a2 {+ arc.inverse()+ } else {+ return Err(fail("end face corner"));+ };+ es.push(corner);+ }+ }+ wires.push(mt::Wire::from(es));+ }+ out.push(crate::heal::absolute_face(f, wires).ok_or_else(|| fail("an end face could not be rebuilt"))?);+ continue;+ }let on1 = side1.contains(&fi);let on2 = side2.contains(&fi);if !on1 && !on2 && !f.edge_iter().any(|e| seam_subst.contains_key(&e.id())) {@@ -379,7 +498,7 @@ pub(crate) fn curve_blend(solid: &Solid, ids: &[mt::EdgeID], size: f64, r: f64,}// Blend faces: each runs its side-1 contact the other way from side 1's face.for (k, bf) in blends.iter().enumerate() {- let (Some(e1), Some(e2), Some(ak), Some(ak1)) = (c1.get(k), c2.get(k), arcs.get(k), arcs.get((k + 1) % n)) else {+ let (Some(e1), Some(e2), Some(ak), Some(ak1)) = (c1.get(k), c2.get(k), arcs.get(k), arcs.get((k + 1) % nv)) else {return Err(fail("blend"));};let f1i = side1.get(k).ok_or_else(|| fail("side"))?;diff --git a/crates/kernel/src/tests.rs b/crates/kernel/src/tests.rsindex 0f2df00d9c..9b98ce610a 100644--- a/crates/kernel/src/tests.rs+++ b/crates/kernel/src/tests.rs@@ -1079,3 +1079,26 @@ fn fillet_where_a_branch_pipe_meets_a_main_pipe() {// Main cylinder, branch cylinder, the blend, the branch's top and the main's two ends.assert_eq!(m.merged.faces, 6, "{:?}", m.merged);}++#[test]+fn fillet_an_open_curved_edge() {+ use solvecraft_geom::Seg2;+ // A D-shaped block: the round top edge only, ending at the flat wall's sharp corners.+ let d = Loop2 {+ segs: vec![+ Seg2::Arc { center: Vec2::ZERO, radius: 10.0, start: 0.0, sweep: PI },+ Seg2::Line { a: Vec2::new(-10.0, 0.0), b: Vec2::new(10.0, 0.0) },+ ],+ };+ let b = extrude(&Plane::XY, &[Region2 { outer: d, holes: vec![] }], 0.0, 15.0).unwrap().pop().unwrap();+ let v0 = measure(&b).unwrap().volume;+ let f = fillet(&b, &[Vec3::new(0.0, 10.0, 15.0)], 2.0).unwrap();+ // (A fine tessellation: the difference of two measured volumes magnifies their error.)+ let _ = v0;+ let fine = |x: &Body| x.tessellate_with(0.002, true).unwrap().measure().volume;+ let removed = fine(&b) - fine(&f);+ // Pappus: the corner's cross-section r²(1 − π/4), its centroid 0.2234 r in from the wall.+ let r = 2.0;+ let want = r * r * (1.0 - PI / 4.0) * (10.0 - r * (10.0 - 3.0 * PI) / (3.0 * (4.0 - PI))) * PI;+ assert!(rel(removed, want) < 1e-3, "{removed} vs {want}");+}