SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Wave 384/509: Kernel rig: interference and clearance between placed occurrences (and 2 more)
jyvikofadca8440f87
diff --git a/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/expected.json b/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/expected.jsonnew file mode 100644index 0000000000..d196bfa6c1--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/expected.json@@ -0,0 +1,21 @@+{+ "sources": [],+ "what": "inspect.clearance of the arm lifted 5 mm off the base",+ "source": "analytic",+ "method": "Base: box 20x20x10 from (-10,-10,-10), grounded; Arm: box 40x10x10 from (0,-5,0), centre (20,0,5); Arm moved by (0,0,5): its bottom (z 5) is 5 mm above Base's top (z 0) over x 0..10: distance 5",+ "body_count": 2,+ "volume_mm3": 8000.0,+ "results": [+ {+ "step": 9,+ "json": {+ "overlaps": [],+ "near": [+ {+ "distance_mm": 5.0+ }+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/recipe.json b/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/recipe.jsonnew file mode 100644index 0000000000..f3045bb69b--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-clearance-between-occurrences/recipe.json@@ -0,0 +1,92 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 20,+ "height": 10,+ "corner": [+ -10,+ -10,+ -10+ ],+ "operation": "new",+ "body_name": "BaseBox"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 10,+ "height": 10,+ "corner": [+ 0,+ -5,+ 0+ ],+ "operation": "new",+ "body_name": "ArmBox"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Base",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "BaseBox"+ ],+ "component": "Base"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Arm",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "ArmBox"+ ],+ "component": "Arm"+ }+ },+ {+ "command": "occurrence.ground",+ "params": {+ "occurrence": "Base:1",+ "grounded": true+ }+ },+ {+ "command": "occurrence.move",+ "params": {+ "occurrence": "Arm:1",+ "translate": [+ 0,+ 0,+ 5+ ]+ }+ },+ {+ "command": "inspect.clearance",+ "params": {+ "clearance": 10+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/expected.json b/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/expected.jsonnew file mode 100644index 0000000000..07c6dbb0b0--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/expected.json@@ -0,0 +1,21 @@+{+ "sources": [],+ "what": "inspect.clearance between the arm turned 90 degrees and a grounded block",+ "source": "analytic",+ "method": "Base: box 20x20x10 from (-10,-10,-10), grounded; Arm: box 40x10x10 from (0,-5,0), centre (20,0,5); a block 10x10x10 from (20,0,0); hinge at 90 puts Arm at x -5..5, y 0..40: the gap to the block's face x = 20 is 15",+ "body_count": 3,+ "volume_mm3": 9000.0,+ "results": [+ {+ "step": 14,+ "json": {+ "overlaps": [],+ "near": [+ {+ "distance_mm": 15.0+ }+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/recipe.json b/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/recipe.jsonnew file mode 100644index 0000000000..78c6abd40c--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-clearance-turned-occurrence/recipe.json@@ -0,0 +1,169 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 20,+ "height": 10,+ "corner": [+ -10,+ -10,+ -10+ ],+ "operation": "new",+ "body_name": "BaseBox"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 10,+ "height": 10,+ "corner": [+ 0,+ -5,+ 0+ ],+ "operation": "new",+ "body_name": "ArmBox"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Base",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "BaseBox"+ ],+ "component": "Base"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Arm",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "ArmBox"+ ],+ "component": "Arm"+ }+ },+ {+ "command": "occurrence.ground",+ "params": {+ "occurrence": "Base:1",+ "grounded": true+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 10,+ "width": 10,+ "height": 10,+ "corner": [+ 20,+ 0,+ 0+ ],+ "operation": "new",+ "body_name": "PostBox"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Post",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "PostBox"+ ],+ "component": "Post"+ }+ },+ {+ "command": "occurrence.ground",+ "params": {+ "occurrence": "Post:1",+ "grounded": true+ }+ },+ {+ "command": "joint.create",+ "params": {+ "type": "revolute",+ "name": "Hinge",+ "flip": true,+ "a": {+ "occurrence": "Base",+ "point": [+ 0,+ 0,+ 0+ ],+ "z": [+ 0,+ 0,+ 1+ ]+ },+ "b": {+ "occurrence": "Arm",+ "point": [+ 0,+ 0,+ 0+ ],+ "z": [+ 0,+ 0,+ 1+ ]+ },+ "quiet": true+ }+ },+ {+ "command": "joint.drive",+ "params": {+ "joint": "Hinge",+ "quiet": true,+ "value": 90+ }+ },+ {+ "command": "inspect.clearance",+ "params": {+ "bodies": [+ "ArmBox"+ ],+ "against": [+ "PostBox"+ ],+ "clearance": 20+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/expected.json b/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/expected.jsonnew file mode 100644index 0000000000..9b67417b3d--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/expected.json@@ -0,0 +1,39 @@+{+ "sources": [],+ "what": "inspect.interference of the arm sunk 5 mm into the base",+ "source": "analytic",+ "method": "Base: box 20x20x10 from (-10,-10,-10), grounded; Arm: box 40x10x10 from (0,-5,0), centre (20,0,5); Arm moved by (0,0,-5): it shares x 0..10, y -5..5, z -5..0 with Base: 500 mm3, area 2(100+50+50) = 400, centre (5,0,-2.5)",+ "body_count": 2,+ "volume_mm3": 8000.0,+ "results": [+ {+ "step": 9,+ "json": {+ "count": 1,+ "interferences": [+ {+ "volume_mm3": 500.0,+ "area_mm2": 400.0,+ "center": [+ 5.0,+ 0.0,+ -2.5+ ],+ "bbox": {+ "min": [+ 0.0,+ -5.0,+ -5.0+ ],+ "max": [+ 10.0,+ 5.0,+ 0.0+ ]+ }+ }+ ]+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/recipe.json b/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/recipe.jsonnew file mode 100644index 0000000000..489b8e3f42--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-interference-between-occurrences/recipe.json@@ -0,0 +1,90 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 20,+ "height": 10,+ "corner": [+ -10,+ -10,+ -10+ ],+ "operation": "new",+ "body_name": "BaseBox"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 10,+ "height": 10,+ "corner": [+ 0,+ -5,+ 0+ ],+ "operation": "new",+ "body_name": "ArmBox"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Base",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "BaseBox"+ ],+ "component": "Base"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Arm",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "ArmBox"+ ],+ "component": "Arm"+ }+ },+ {+ "command": "occurrence.ground",+ "params": {+ "occurrence": "Base:1",+ "grounded": true+ }+ },+ {+ "command": "occurrence.move",+ "params": {+ "occurrence": "Arm:1",+ "translate": [+ 0,+ 0,+ -5+ ]+ }+ },+ {+ "command": "inspect.interference",+ "params": {}+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/expected.json b/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/expected.jsonnew file mode 100644index 0000000000..3b095dc1a9--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/expected.json@@ -0,0 +1,17 @@+{+ "sources": [],+ "what": "inspect.interference of the arm standing on the base face to face",+ "source": "analytic",+ "method": "Base: box 20x20x10 from (-10,-10,-10), grounded; Arm: box 40x10x10 from (0,-5,0), centre (20,0,5); they meet on a face only: no overlap volume",+ "body_count": 2,+ "volume_mm3": 8000.0,+ "results": [+ {+ "step": 8,+ "json": {+ "count": 0,+ "interferences": []+ }+ }+ ]+}diff --git a/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/recipe.json b/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/recipe.jsonnew file mode 100644index 0000000000..f98026bbc0--- /dev/null+++ b/tests/kernel-cases/assemblies/cov-inspect-interference-touching-occurrences/recipe.json@@ -0,0 +1,79 @@+{+ "commands": [+ {+ "command": "solid.box",+ "params": {+ "length": 20,+ "width": 20,+ "height": 10,+ "corner": [+ -10,+ -10,+ -10+ ],+ "operation": "new",+ "body_name": "BaseBox"+ }+ },+ {+ "command": "solid.box",+ "params": {+ "length": 40,+ "width": 10,+ "height": 10,+ "corner": [+ 0,+ -5,+ 0+ ],+ "operation": "new",+ "body_name": "ArmBox"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Base",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "BaseBox"+ ],+ "component": "Base"+ }+ },+ {+ "command": "component.create",+ "params": {+ "name": "Arm",+ "parent": "root",+ "activate": false+ }+ },+ {+ "command": "component.move_bodies",+ "params": {+ "bodies": [+ "ArmBox"+ ],+ "component": "Arm"+ }+ },+ {+ "command": "occurrence.ground",+ "params": {+ "occurrence": "Base:1",+ "grounded": true+ }+ },+ {+ "command": "inspect.interference",+ "params": {}+ }+ ]+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/expected.json b/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/expected.jsonnew file mode 100644index 0000000000..b8dac12c57--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "a 1/4-20 UNC tapped hole through the stock: drilled #7 (0.201 in), cosmetic thread",+ "source": "analytic",+ "method": "ASME B1.1 1/4-20 UNC: D = 0.25 in, P = 1/20 in, basic minor D1 = D - 1.082532 P = 0.1959 in; the tap drill is #7, 0.201 in = 5.1054 mm (the cutting-tap drill for about 75% thread, Guhring's table in thread_catalog.rs); removed pi 2.5527^2 20; the cosmetic thread adds no geometry: + one cylinder face",+ "body_count": 1,+ "volume_mm3": 47590.57022274,+ "faces": 7+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/recipe.json b/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/recipe.jsonnew file mode 100644index 0000000000..de94c5af2f--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through/recipe.json@@ -0,0 +1,16 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 30,+ 20,+ 20+ ],+ "thread": "1/4-20 UNC"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/expected.json b/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/expected.jsonnew file mode 100644index 0000000000..ab031d28d3--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "a 1/4-28 UNF tapped blind hole 10 deep, flat bottom: drilled 5.45 mm, cosmetic thread",+ "source": "analytic",+ "method": "ASME B1.1 1/4-28 UNF: D = 0.25 in, P = 1/28 in, basic minor D1 = D - 1.082532 P = 5.368 mm; the tap maker's drill 5.45 mm (Guhring, thread_catalog.rs), above D1 as a drill must be; removed pi 2.725^2 10; + wall and floor",+ "body_count": 1,+ "volume_mm3": 47766.717110517,+ "faces": 8+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/recipe.json b/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/recipe.jsonnew file mode 100644index 0000000000..cdc832628a--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind/recipe.json@@ -0,0 +1,17 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 30,+ 20,+ 20+ ],+ "thread": "1/4-28 UNF",+ "depth": 10+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/expected.json b/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/expected.jsonnew file mode 100644index 0000000000..76c02b1294--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "an Rc 1/2 tapped hole through the stock (ISO 7-1 internal taper): a straight hole at the tap maker's 17.6 mm, cosmetic thread",+ "source": "analytic",+ "method": "ISO 7-1 Rc 1/2: gauge diameter d = 20.955 at the face, 14 threads per inch, h = 0.640327 P, minor d1 = d - 2h = 18.631 there and 1/16 smaller per mm deeper (18.631 - 13.2/16 = 17.806 at the end of the 13.2 mm useful thread); a straight (not reamed) hole takes the tap maker's 17.6 (Yamawa YEU23 p.709, the largest for non-full threads): removed pi 8.8^2 20; + one cylinder face",+ "body_count": 1,+ "volume_mm3": 43134.30129812,+ "faces": 7+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/recipe.json b/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/recipe.jsonnew file mode 100644index 0000000000..886ccd640e--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/016-tapped-rc-1-2-through/recipe.json@@ -0,0 +1,16 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 30,+ 20,+ 20+ ],+ "thread": "Rc 1/2"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/expected.json b/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/expected.jsonnew file mode 100644index 0000000000..0a2b2a99ea--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/expected.json@@ -0,0 +1,9 @@+{+ "sources": [],+ "what": "a 1/4-18 NPT tapped hole through the stock (ASME B1.20.1): a straight hole at the tap maker's 10.85 mm, cosmetic thread",+ "source": "analytic",+ "method": "ASME B1.20.1 1/4-18 NPT: E0 = 0.47739 in, L1 = 0.2278 in, h = 0.8 P; at the face the minor E1 - h = 0.48163 - 0.04444 in = 11.105 mm, 1/16 smaller per mm deeper; a straight hole takes the tap maker's 10.85 (Yamawa YEU23 p.710): removed pi 5.425^2 20; + one cylinder face",+ "body_count": 1,+ "volume_mm3": 46150.819294189,+ "faces": 7+}diff --git a/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/recipe.json b/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/recipe.jsonnew file mode 100644index 0000000000..0ea44228ca--- /dev/null+++ b/tests/kernel-cases/ladder/05-holes-and-taps/017-tapped-1-4-npt-through/recipe.json@@ -0,0 +1,16 @@+{+ "base": "../../01-primitives/001-box",+ "commands": [+ {+ "command": "solid.hole",+ "params": {+ "position": [+ 30,+ 20,+ 20+ ],+ "thread": "1/4-18 NPT"+ }+ }+ ]+}diff --git a/tests/kernel-cases/ladder/ladder.json b/tests/kernel-cases/ladder/ladder.jsonindex 77c68a5c1a..3bc77da545 100644--- a/tests/kernel-cases/ladder/ladder.json+++ b/tests/kernel-cases/ladder/ladder.json@@ -91,7 +91,11 @@"ladder/05-holes-and-taps/011-crossing-holes-steinmetz","ladder/05-holes-and-taps/012-crossing-tapped-holes-offset","ladder/05-holes-and-taps/008-tapped-m5-into-curved-face",- "ladder/05-holes-and-taps/013-part-holes"+ "ladder/05-holes-and-taps/013-part-holes",+ "ladder/05-holes-and-taps/014-tapped-1-4-20-unc-through",+ "ladder/05-holes-and-taps/015-tapped-1-4-28-unf-blind",+ "ladder/05-holes-and-taps/016-tapped-rc-1-2-through",+ "ladder/05-holes-and-taps/017-tapped-1-4-npt-through"],"tier": "05-holes-and-taps","what": "holes and tapped holes"diff --git a/tools/kernel-ladder/cases.py b/tools/kernel-ladder/cases.pyindex 562a4e09aa..03ad3d2daa 100644--- a/tools/kernel-ladder/cases.py+++ b/tools/kernel-ladder/cases.py@@ -530,11 +530,11 @@ case(T5, "005-countersink", "a countersunk hole: d6.6 through, d12 x 90 deg councase(T5, "006-tapped-m6-through", "an M6 tapped hole through: the tap drill d5 (major - pitch), cosmetic thread",[H(position=top, thread="M6")],{"body_count": 1, "volume_mm3": VB - PI * 6.25 * 20, "faces": 7}, "M6 coarse pitch 1: tap drill 6 - 1 = 5; removed pi 2.5^2 20; the cosmetic thread adds no geometry", base=B1)-ch8 = 3.375 / math.tan(math.radians(59))+ch8 = 3.4 / math.tan(math.radians(59))case(T5, "007-tapped-m8-blind", "an M8 tapped blind hole 12 deep with a 118 deg drill point",[H(position=top, thread="M8", depth=12, type="drilled", tip_angle=118)],- {"body_count": 1, "volume_mm3": VB - PI * 3.375 ** 2 * 12 - PI * 3.375 ** 2 * ch8 / 3, "faces": 8},- "M8 coarse pitch 1.25: tap drill (major - pitch) 6.75; removed pi r^2 12 to the shoulder + the point cone pi r^2 (r/tan59)/3", base=B1)+ {"body_count": 1, "volume_mm3": VB - PI * 3.4 ** 2 * 12 - PI * 3.4 ** 2 * ch8 / 3, "faces": 8},+ "M8 coarse pitch 1.25: the tap maker's drill 6.8 (Yamawa YEU23 p.704); removed pi r^2 12 to the shoulder + the point cone pi r^2 (r/tan59)/3", base=B1)r, Rc = 2.1, 20vint = quad(lambda y: 2 * math.sqrt(max(r * r - y * y, 0)) * 2 * math.sqrt(Rc * Rc - y * y), -r, r, 128)case(T5, "008-tapped-m5-into-curved-face", "an M5 tapped hole drilled radially through a cylinder r20 lying along X",@@ -568,6 +568,29 @@ case(T5, "013-part-holes", "the running part: an M6 tapped through hole, an M5 t{"body_count": 1, "volume_mm3": V5, "faces": 20},"removed pi 2.5^2 20 (M6, tap drill 5) + pi 2.1^2 8 (M5, tap drill 4.2, flat) + pi 1.65^2 35; faces +1 +2 +1", base=C4)C5 = up(T5, "013-part-holes")+# Tapped holes of the other catalogued families: cosmetic threads in a hole drilled to the tap+# maker's drill (crates/doc/src/thread_catalog.rs), so a drilled cylinder is all the geometry.+case(T5, "014-tapped-1-4-20-unc-through", "a 1/4-20 UNC tapped hole through the stock: drilled #7 (0.201 in), cosmetic thread",+ [H(position=top, thread="1/4-20 UNC")],+ {"body_count": 1, "volume_mm3": VB - PI * (0.201 * 25.4 / 2) ** 2 * 20, "faces": 7},+ "ASME B1.1 1/4-20 UNC: D = 0.25 in, P = 1/20 in, basic minor D1 = D - 1.082532 P = 0.1959 in; the tap drill is #7, 0.201 in = 5.1054 mm "+ "(the cutting-tap drill for about 75% thread, Guhring's table in thread_catalog.rs); removed pi 2.5527^2 20; the cosmetic thread adds no geometry: + one cylinder face", base=B1)+case(T5, "015-tapped-1-4-28-unf-blind", "a 1/4-28 UNF tapped blind hole 10 deep, flat bottom: drilled 5.45 mm, cosmetic thread",+ [H(position=top, thread="1/4-28 UNF", depth=10)],+ {"body_count": 1, "volume_mm3": VB - PI * 2.725 ** 2 * 10, "faces": 8},+ "ASME B1.1 1/4-28 UNF: D = 0.25 in, P = 1/28 in, basic minor D1 = D - 1.082532 P = 5.368 mm; the tap maker's drill 5.45 mm (Guhring, thread_catalog.rs), "+ "above D1 as a drill must be; removed pi 2.725^2 10; + wall and floor", base=B1)+case(T5, "016-tapped-rc-1-2-through", "an Rc 1/2 tapped hole through the stock (ISO 7-1 internal taper): a straight hole at the tap maker's 17.6 mm, cosmetic thread",+ [H(position=top, thread="Rc 1/2")],+ {"body_count": 1, "volume_mm3": VB - PI * 8.8 ** 2 * 20, "faces": 7},+ "ISO 7-1 Rc 1/2: gauge diameter d = 20.955 at the face, 14 threads per inch, h = 0.640327 P, minor d1 = d - 2h = 18.631 there and 1/16 smaller per mm deeper "+ "(18.631 - 13.2/16 = 17.806 at the end of the 13.2 mm useful thread); a straight (not reamed) hole takes the tap maker's 17.6 (Yamawa YEU23 p.709, the largest for "+ "non-full threads): removed pi 8.8^2 20; + one cylinder face", base=B1)+case(T5, "017-tapped-1-4-npt-through", "a 1/4-18 NPT tapped hole through the stock (ASME B1.20.1): a straight hole at the tap maker's 10.85 mm, cosmetic thread",+ [H(position=top, thread="1/4-18 NPT")],+ {"body_count": 1, "volume_mm3": VB - PI * 5.425 ** 2 * 20, "faces": 7},+ "ASME B1.20.1 1/4-18 NPT: E0 = 0.47739 in, L1 = 0.2278 in, h = 0.8 P; at the face the minor E1 - h = 0.48163 - 0.04444 in = 11.105 mm, 1/16 smaller per mm deeper; "+ "a straight hole takes the tap maker's 10.85 (Yamawa YEU23 p.710): removed pi 5.425^2 20; + one cylinder face", base=B1)# ---------------------------------------------------------------- 06 threadsdef thr(face, **p):@@ -759,14 +782,14 @@ case(T6, "019-external-tr40x14-p7-two-start", "a modelled two-start trapezoidal"groove of pitch 7 would: over 42 mm (three leads, six pitches) between free ends") + "ISO 2904 for P 7: 30 deg, H1 = P/2, crest flat 0.366 P, ""ac = 0.5 (P 6..12), external minor d3 = d - 2 (H1 + ac) = 32")-rf10 = 5 - 5 * math.sqrt(3) / 2 * 1.5 / 8-case(T6, "017-external-m10-chamfered-tip", "001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the minor diameter, cut after the groove",- cylT + [thr([5, 0, 15], designation="M10", tip="chamfer")],+rf10 = 5 - 17 / 24 * math.sqrt(3) / 2 * 1.5 # ISO 724: d3 = d - 2 (17/24) H+case(T6, "017-external-m10-chamfered-tip", "001's modelled M10 thread with ISO 4753's chamfered end at both free ends: a 45 deg cone down to the external minor diameter d3, cut after the groove",+ cylT + [thr([5, 0, 15], designation="M10", tip="both")],{"body_count": 1, "volume_mm3": ext_volume(10, 1.5, [(0, 5 - rf10, lambda z: rf10 + z), (5 - rf10, 25 + rf10, lambda z: 5), (25 + rf10, 30, lambda z: rf10 + 30 - z)]),"tolerance": {"rel": 1e-4}},TMETH.replace("Tolerance 0.5%: solid.thread cuts faceted by design (chords within P/200 on the body, P/100 on the tool)", "Tolerance 0.01%: SMLib's exact screw sweep") +- "; the chamfer is axisymmetric and cut after the groove, so it only lowers the stock's outer radius: r <= d_f/2 + distance from the end (45 deg), d_f the minor diameter d - 5H/4 = 8.376 "- "(ISO 4753 chamfered end: the end's diameter at most the minor diameter)")+ "; the chamfer is axisymmetric and cut after the groove, so it only lowers the stock's outer radius: r <= d_f/2 + distance from the end (45 deg), d_f the external minor diameter d3 = d - 1.226869 P = 8.160 "+ "(ISO 724; ISO 4753 chamfered end: the end's diameter at most the minor diameter), below the modelled root d1")# ---------------------------------------------------------------- 07 filletsF = lambda edges, r, **p: C("solid.fillet", edges=edges, radius=r, **p)@@ -814,7 +837,7 @@ case(T7, "010-corner-unequal-r7-r3", "an r7 vertical round at a corner, then r3"Faces: 6 planes + the r7 cylinder + the r3 chain's cylinder, torus, cylinder; edges: 5 round the bottom, 5 round the top, 5 vertical (two r7 tangent lines, the box's ""three other verticals), the chain's three on the walls and two end arcs, its two seams; vertices from Euler (V - E + F = 2): 14", base=B1)case(T7, "016-corner-three-sequential-r5-r3-r7", 'rounds r5 and r3 on the two top edges at a corner, then r7 on the vertical edge under them: refused, the r7 cannot exist',- [F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 7)], {"outcome": "refused"},+ [F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 7)], {"outcome": "refused", "refusal": "the fillet is larger than the faces beside its edges allow"},"the r7 runs on (tangent chain) up the side x=60 along its arc on the r5 round, a circle of radius 5 about the r5 axis: the r7's contact line on that face would be the arc offset 7 towards its centre, radius 5 - 7 < 0, so the blend passes through itself; and along the seam of the r5 and r3 rounds no ball over r3 fits the r3 round. No such round exists, so the right answer is a clean refusal (SMLib: no room for the rolling ball). 018 is the same corner with a radius that fits.", base=B1, source="invariants")case(T7, "018-corner-three-sequential-r5-r3-r2", 'rounds r5 and r3 on the two top edges at a corner, then r2 on the vertical edge under them, run on up into the corner',[F([corner[0]], 5), F([corner[1]], 3, tangent_chain=False), F([[60, 40, 8]], 2)], {"body_count": 1, "faces": 11, "bbox": BBOX},@@ -1119,12 +1142,12 @@ case(T11, "002-flange", "a revolved flange and hub with a bore, six bolt holes,w30 = ext_half_width(30, 3.5)case(T11, "003-threaded-flange", "the flange with a modelled M30 thread on its hub, between the round and the chamfer, and M8 tapped holes in the disk",[thr([15, 0, 20], designation="M30"), H(position=[0, 28, 10], thread="M8", name="Tap"), C("solid.pattern.circular", features=["Tap"], axis="Z", count=3)],- {"body_count": 1, "volume_mm3": Vf - groove(30, 3.5, [(13 + w30, 28.5, lambda z: 15), (28.5, 30, lambda z: 15 - (z - 28.5))]) - 3 * PI * 3.375 ** 2 * 10,+ {"body_count": 1, "volume_mm3": Vf - groove(30, 3.5, [(13 + w30, 28.5, lambda z: 15), (28.5, 30, lambda z: 15 - (z - 28.5))]) - 3 * PI * 3.4 ** 2 * 10,"bbox": {"min": [-40, -40, 0], "max": [40, 40, 30]}, "tolerance": {"rel": 1e-4}},"the hub's cylinder (r15) runs from the r3 round at its root (z 13) to the 1.5 chamfer at its top (z 28.5): the M30 groove (P 3.5) stops w = %.6f clear of the round, ""a shoulder (06/007's rule), and runs out through the chamfer, a free end (06/006's): it removes the stock less 2 pi int int r m(r) dr dz over z 13 + w..28.5 at r 15 and the chamfer "- "(r 15 - (z - 28.5)); the bore r8 is inside the root r 13.1. The M8 tap drills (6.75) go through the 10 mm disk at r 28, 90 deg + k 120, clear of the bolt holes (30 deg apart): "- "3 pi 3.375^2 10. Bbox: the flange's" % w30, base=up(T11, "002-flange"))+ "(r 15 - (z - 28.5)); the bore r8 is inside the root r 13.1. The M8 tap drills (6.8, the tap maker's) go through the 10 mm disk at r 28, 90 deg + k 120, clear of the bolt holes (30 deg apart): "+ "3 pi 3.4^2 10. Bbox: the flange's" % w30, base=up(T11, "002-flange"))case(T11, "004-housing", "the running part with every tier: back wall, boss, slot, spline window, tapped holes, rounds, chamfers, shell, vents, and a modelled M16 thread on the boss",[thr([23, 15, 25], designation="M16")],{"body_count": 1, "volume_mm3": V9 - 4 * PI * 1.5 ** 2 * 1.5 - groove(16, 2, [(21 + w16, 29, lambda z: 8), (29, 30, lambda z: 8 - (z - 29))]),