SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Split Body by a face of a body: FusionSplitBodyCommand tool {body, point}
bherbruckfeaaba156e6c
diff --git a/crates/doc/src/document.rs b/crates/doc/src/document.rsindex 412d6959a9..35548e794b 100644--- a/crates/doc/src/document.rs+++ b/crates/doc/src/document.rs@@ -312,10 +312,13 @@ pub enum FeatureKind {ConstructionPlane {plane: PlaneRef,},- /// Split a body with a plane into two bodies.+ /// Split a body into the parts on either side of a plane, or of a face of a body (the face+ /// through `point`, its surface extended) when `tool` is set.Split {body: String,plane: PlaneRef,+ #[serde(default, skip_serializing_if = "Option::is_none")]+ tool: Option<FaceAt>,},/// Scale bodies about a point (uniform, or per axis).Scale {@@ -630,6 +633,13 @@ pub enum FeatureKind {},}+/// A face picked by a point on it, on a named body.+#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]+pub struct FaceAt {+ pub body: String,+ pub point: Vec3,+}+/// Triangles of one imported mesh body (millimetres).#[derive(Clone, Debug, PartialEq, Serialize, Deserialize)]pub struct MeshData {diff --git a/crates/doc/src/eval.rs b/crates/doc/src/eval.rsindex 1d17c2499c..8e4ee146d5 100644--- a/crates/doc/src/eval.rs+++ b/crates/doc/src/eval.rs@@ -2016,13 +2016,24 @@ fn eval_feature(doc: &Document, vals: &BTreeMap<String, Value>, f: &Feature, st:doc.resolve_plane(vals, plane, 0)?;Ok(())}- FeatureKind::Split { body, plane } => {- let pl = doc.resolve_plane(vals, plane, 0)?;+ FeatureKind::Split { body, plane, tool } => {let i = st.bodies.iter().position(|b| &b.name == body).ok_or_else(|| DocError::Unknown(format!("body `{body}`")))?;let Some(mb) = st.bodies.get(i).cloned() else { return Err(DocError::Unknown(format!("body `{body}`"))) };- let parts = kernel::split_by_plane(&mb.body, &pl)?;+ let parts = match tool {+ // A face of a body (its surface extended).+ Some(t) => {+ let tb = st.body(&t.body).ok_or_else(|| DocError::Unknown(format!("body `{}`", t.body)))?;+ let face = crate::appearance::face_index_at(tb, t.point)+ .ok_or_else(|| DocError::Invalid(format!("no face of `{}` at the tool point", t.body)))?;+ kernel::split_body(&mb.body, &kernel::SplitTool::Face { body: &tb.body, face })?+ }+ None => {+ let pl = doc.resolve_plane(vals, plane, 0)?;+ kernel::split_by_plane(&mb.body, &pl)?+ }+ };if parts.len() < 2 {- return Err(DocError::Invalid("the plane does not split the body".into()));+ return Err(DocError::Invalid("the tool does not split the body".into()));}let mut it = parts.into_iter();if let (Some(first), Some(slot)) = (it.next(), st.bodies.get_mut(i)) {diff --git a/crates/engine/src/cmd/features.rs b/crates/engine/src/cmd/features.rsindex 642c075cd9..0584f08612 100644--- a/crates/engine/src/cmd/features.rs+++ b/crates/engine/src/cmd/features.rs@@ -88,7 +88,10 @@ pub static COMMANDS: &[CommandSpec] = &[.at("SOLID", "CONSTRUCT").icon("plane").params("base: XY|XZ|YZ|plane name; axis: X|Y|Z|{origin, dir}; angle: expr; name?"),- CommandSpec::new("FusionSplitBodyCommand", "Split Body", split_body).at("SOLID", "MODIFY").icon("split").params("body: name; plane: XY|XZ|YZ|plane name|{origin, normal}"),+ CommandSpec::new("FusionSplitBodyCommand", "Split Body", split_body)+ .at("SOLID", "MODIFY")+ .icon("split")+ .params("body: name; plane: XY|XZ|YZ|plane name|{origin, normal} — or tool: {body, point} (a face of a body, its surface extended)"),CommandSpec::new("FusionPressPullCommand", "Press Pull", press_pull).at("SOLID", "MODIFY").icon("presspull")@@ -771,8 +774,27 @@ fn split_body(s: &mut Session, p: &Value) -> Result<Value> {if s.model.state().body(&body).is_none() {return Err(bad(cmd, format!("no body `{body}`")));}+ // A face as the tool: `tool: {body, point}` (its surface extended); else a plane.+ if let Some(t) = p.get("tool").filter(|t| !t.is_null()) {+ let tb = t.get("body").and_then(Value::as_str).ok_or_else(|| bad(cmd, "`tool.body` must name a body"))?.to_string();+ let point = t.get("point").and_then(crate::params::vec3).ok_or_else(|| bad(cmd, "`tool.point` must be [x, y, z] on the tool face"))?;+ let st = s.model.state();+ let tbody = st.body(&tb).ok_or_else(|| bad(cmd, format!("no body `{tb}`")))?;+ if solvecraft_doc::appearance::face_index_at(tbody, point).is_none() {+ return Err(bad(cmd, "`tool.point` is not on a face of the tool body"));+ }+ return add_feature(+ s,+ p,+ FeatureKind::Split {+ body,+ plane: solvecraft_doc::PlaneRef::Origin { name: "XY".into() },+ tool: Some(solvecraft_doc::FaceAt { body: tb, point }),+ },+ );+ }let plane = plane_param(s, p.get("plane"), cmd)?;- add_feature(s, p, FeatureKind::Split { body, plane })+ add_feature(s, p, FeatureKind::Split { body, plane, tool: None })}/// ISO 273 clearance hole diameters (close, normal, loose fit) for metric bolts.diff --git a/crates/engine/src/tests.rs b/crates/engine/src/tests.rsindex 818e4b4664..067d49942b 100644--- a/crates/engine/src/tests.rs+++ b/crates/engine/src/tests.rs@@ -1041,6 +1041,23 @@ fn iges_export_and_open() {assert_eq!(st.bodies[1].body.color(), Some([1.0, 0.0, 0.0]));}+/// Split Body by a face of another body (its surface extended): a box cut by a cylinder's+/// side into the core and the rest; volumes add up exactly.+#[test]+fn split_body_by_a_face() {+ let mut s = Session::default();+ run(&mut s, "PrimitiveBox", json!({"length": 10, "width": 20, "height": 30, "body_name": "Block"}));+ run(&mut s, "PrimitiveCylinder", json!({"radius": 4, "height": 40, "base": [5, 10, -5], "body_name": "Tool"}));+ run(&mut s, "FusionSplitBodyCommand", json!({"body": "Block", "tool": {"body": "Tool", "point": [9, 10, 10]}}));+ let st = s.world_state();+ let mut v: Vec<f64> =+ st.bodies.iter().filter(|b| b.name.starts_with("Block")).map(|b| solvecraft_kernel::measure(&b.body).unwrap().volume).collect();+ v.sort_by(f64::total_cmp);+ let core = PI * 16.0 * 30.0;+ assert!(v.len() == 2 && rel(v[0], core) < 1e-3 && rel(v[1], 6000.0 - core) < 1e-3, "{v:?}");+ assert!(s.execute("FusionSplitBodyCommand", &json!({"body": "Block", "tool": {"body": "Tool", "point": [100, 0, 0]}})).is_err());+}+/// Components export as a STEP assembly: products, occurrences, placements.#[test]fn components_export_as_step_assembly() {diff --git a/crates/ui-egui/src/dialogs.rs b/crates/ui-egui/src/dialogs.rsindex a9cff5f362..5e241b4182 100644--- a/crates/ui-egui/src/dialogs.rs+++ b/crates/ui-egui/src/dialogs.rs@@ -2625,7 +2625,7 @@ pub fn for_feature(app: &SolveApp, id: u64, marker: Option<usize>) -> Option<Dia}d}- FeatureKind::Split { body, plane } => {+ FeatureKind::Split { body, plane, .. } => {let mut d = start("FusionSplitBodyCommand")?;if let Some(inp) = d.inputs.first_mut() {inp.items = vec![Sel::Body { name: body.clone() }];diff --git a/docs/parity.md b/docs/parity.mdindex 3d85c3363b..8fb0765ddf 100644--- a/docs/parity.md+++ b/docs/parity.md@@ -2,49 +2,49 @@Generated by `cargo xtask parity` from `xtask/data/fusion-catalog.tsv` (the toolbar commands of Fusion's Design workspace, ids and names only) and the live command registry (`solvecraft-cli commands`). A command counts as live when SolveCraft registers the same command id. This measures breadth, not depth; see ROADMAP.md and docs/oracle.md for depth.-**In scope (SOLID, SKETCH, ASSEMBLY, SHEET METAL, PLASTIC enclosure subset): 220 / 541 commands live (41%).** SOLID + SKETCH: 140 / 291 (48%). Registered commands: 225.+**In scope (SOLID, SKETCH, ASSEMBLY, SHEET METAL, PLASTIC enclosure subset): 278 / 541 commands live (51%).** SOLID + SKETCH: 167 / 291 (57%). Registered commands: 276.-Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE beyond what solids need, PCB, render, animation, simulation, manufacture, drawings, MANAGE, UTILITIES and the rest of PLASTIC. All Design tabs together: 372 / 1175 (32%).+Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE beyond what solids need, PCB, render, animation, simulation, manufacture, drawings, MANAGE, UTILITIES and the rest of PLASTIC. All Design tabs together: 494 / 1175 (42%).| Tab | Panel | Live | Total | % ||---|---|---:|---:|---:|| SOLID | CREATE | 22 | 35 | 63% || SOLID | MODIFY | 18 | 32 | 56% |-| SOLID | ASSEMBLE | 7 | 21 | 33% |-| SOLID | CONFIGURE | 0 | 3 | 0% |+| SOLID | ASSEMBLE | 12 | 21 | 57% |+| SOLID | CONFIGURE | 2 | 3 | 67% || SOLID | CONSTRUCT | 2 | 20 | 10% |-| SOLID | INSPECT | 4 | 25 | 16% |-| SOLID | INSERT | 5 | 11 | 45% |+| SOLID | INSPECT | 12 | 25 | 48% |+| SOLID | INSERT | 6 | 11 | 55% || SOLID | SELECT | 0 | 15 | 0% || SOLID | POSITION | 2 | 2 | 100% || SKETCH | CREATE | 41 | 41 | 100% || SKETCH | MODIFY | 12 | 12 | 100% || SKETCH | CONSTRAINTS | 15 | 15 | 100% |-| SKETCH | CONFIGURE | 0 | 3 | 0% |-| SKETCH | INSPECT | 4 | 25 | 16% |-| SKETCH | INSERT | 6 | 13 | 46% |+| SKETCH | CONFIGURE | 2 | 3 | 67% |+| SKETCH | INSPECT | 12 | 25 | 48% |+| SKETCH | INSERT | 7 | 13 | 54% || SKETCH | ASSEMBLE | 0 | 1 | 0% || SKETCH | SELECT | 0 | 15 | 0% || SKETCH | FINISH SKETCH | 2 | 2 | 100% |-| SHEET METAL | CREATE | 14 | 19 | 74% |+| SHEET METAL | CREATE | 15 | 19 | 79% || SHEET METAL | MODIFY | 12 | 21 | 57% |-| SHEET METAL | ASSEMBLE | 6 | 20 | 30% |-| SHEET METAL | CONFIGURE | 0 | 3 | 0% |+| SHEET METAL | ASSEMBLE | 11 | 20 | 55% |+| SHEET METAL | CONFIGURE | 2 | 3 | 67% || SHEET METAL | CONSTRUCT | 2 | 20 | 10% |-| SHEET METAL | INSPECT | 4 | 25 | 16% |-| SHEET METAL | INSERT | 5 | 11 | 45% |+| SHEET METAL | INSPECT | 12 | 25 | 48% |+| SHEET METAL | INSERT | 6 | 11 | 55% || SHEET METAL | SELECT | 0 | 15 | 0% || SHEET METAL | REFOLD | 0 | 1 | 0% || SHEET METAL | POSITION | 2 | 2 | 100% |-| ASSEMBLY | INSERT | 3 | 8 | 38% |+| ASSEMBLY | INSERT | 4 | 8 | 50% || ASSEMBLY | CREATE | 5 | 8 | 62% || ASSEMBLY | RELATIONSHIPS | 4 | 11 | 36% |-| ASSEMBLY | MOTION | 2 | 3 | 67% |+| ASSEMBLY | MOTION | 3 | 3 | 100% || ASSEMBLY | MODIFY | 8 | 11 | 73% |-| ASSEMBLY | CONTACT | 0 | 2 | 0% |-| ASSEMBLY | CONFIGURE | 0 | 3 | 0% |+| ASSEMBLY | CONTACT | 2 | 2 | 100% |+| ASSEMBLY | CONFIGURE | 2 | 3 | 67% || ASSEMBLY | CONSTRUCT | 2 | 20 | 10% |-| ASSEMBLY | INSPECT | 4 | 25 | 16% |+| ASSEMBLY | INSPECT | 12 | 25 | 48% || ASSEMBLY | SELECT | 0 | 15 | 0% || ASSEMBLY | POSITION | 2 | 2 | 100% || PLASTIC | enclosure subset | 5 | 5 | 100% |@@ -55,21 +55,21 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE|---|---|---:|---:|---:|| SURFACE | CREATE | 7 | 25 | 28% || SURFACE | MODIFY | 13 | 26 | 50% |-| SURFACE | ASSEMBLE | 6 | 20 | 30% |-| SURFACE | CONFIGURE | 0 | 3 | 0% |+| SURFACE | ASSEMBLE | 11 | 20 | 55% |+| SURFACE | CONFIGURE | 2 | 3 | 67% || SURFACE | CONSTRUCT | 2 | 20 | 10% |-| SURFACE | INSPECT | 4 | 25 | 16% |-| SURFACE | INSERT | 5 | 11 | 45% |+| SURFACE | INSPECT | 12 | 25 | 48% |+| SURFACE | INSERT | 6 | 11 | 55% || SURFACE | SELECT | 0 | 15 | 0% || SURFACE | POSITION | 2 | 2 | 100% || MESH | CREATE | 2 | 5 | 40% || MESH | PREPARE | 0 | 4 | 0% || MESH | MODIFY | 6 | 30 | 20% |-| MESH | ASSEMBLE | 7 | 21 | 33% |-| MESH | CONFIGURE | 0 | 3 | 0% |+| MESH | ASSEMBLE | 12 | 21 | 57% |+| MESH | CONFIGURE | 2 | 3 | 67% || MESH | CONSTRUCT | 2 | 20 | 10% |-| MESH | INSPECT | 4 | 25 | 16% |-| MESH | INSERT | 4 | 10 | 40% |+| MESH | INSPECT | 12 | 25 | 48% |+| MESH | INSERT | 5 | 10 | 50% || MESH | SELECT | 0 | 10 | 0% || MESH | EXPORT | 0 | 1 | 0% || MESH | POSITION | 2 | 2 | 100% |@@ -78,19 +78,19 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE| FORM | SYMMETRY | 0 | 6 | 0% || FORM | UTILITIES | 0 | 5 | 0% || FORM | CONSTRUCT | 2 | 20 | 10% |-| FORM | INSPECT | 4 | 25 | 16% |-| FORM | INSERT | 6 | 13 | 46% |+| FORM | INSPECT | 12 | 25 | 48% |+| FORM | INSERT | 7 | 13 | 54% || FORM | ASSEMBLE | 0 | 1 | 0% || FORM | SELECT | 0 | 15 | 0% || FORM | FINISH FORM | 0 | 1 | 0% || PLASTIC | SETUP | 2 | 2 | 100% || PLASTIC | CREATE | 26 | 35 | 74% || PLASTIC | MODIFY | 18 | 32 | 56% |-| PLASTIC | ASSEMBLE | 6 | 20 | 30% |-| PLASTIC | CONFIGURE | 0 | 3 | 0% |+| PLASTIC | ASSEMBLE | 11 | 20 | 55% |+| PLASTIC | CONFIGURE | 2 | 3 | 67% || PLASTIC | CONSTRUCT | 2 | 20 | 10% |-| PLASTIC | INSPECT | 4 | 26 | 15% |-| PLASTIC | INSERT | 5 | 11 | 45% |+| PLASTIC | INSPECT | 12 | 26 | 46% |+| PLASTIC | INSERT | 6 | 11 | 55% || PLASTIC | SELECT | 0 | 15 | 0% || PLASTIC | POSITION | 2 | 2 | 100% || MANAGE | ASSIGN | 0 | 1 | 0% |@@ -103,7 +103,7 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE| UTILITIES | NEST | 0 | 1 | 0% || UTILITIES | ADD-INS | 0 | 2 | 0% || UTILITIES | UTILITY | 1 | 3 | 33% |-| UTILITIES | INSPECT | 4 | 24 | 17% |+| UTILITIES | INSPECT | 11 | 24 | 46% || UTILITIES | CREATE PMI | 0 | 4 | 0% || UTILITIES | SELECT | 0 | 15 | 0% || UTILITIES | POSITION | 2 | 2 | 100% |@@ -157,17 +157,33 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SOLID › ASSEMBLE › Rigid Group (`RigidGroupCmd`)- SOLID › ASSEMBLE › Drive Joints (`FusionMoveJointsCommand`)- SOLID › ASSEMBLE › Motion Link (`FusionMotionRelationshipCommand`)+- SOLID › ASSEMBLE › Motion Study (`FusionMotionStudyCommand`)+- SOLID › ASSEMBLE › Enable Contact Sets (`EnableContactSetsCmd`)+- SOLID › ASSEMBLE › Enable All Contact (`EnableAllContactCmd`)+- SOLID › ASSEMBLE › Disable Contact (`DisableAllContactCmd`)+- SOLID › ASSEMBLE › New Contact Set (`ContactSetCmd`)+- SOLID › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)+- SOLID › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)- SOLID › CONSTRUCT › Offset Plane (`ConstructionPlaneOffsetFromPlaneCommand`)- SOLID › CONSTRUCT › Plane at Angle (`ConstructionPlaneAtAngleCommand`)- SOLID › INSPECT › Measure (`MeasureCommand`)- SOLID › INSPECT › Interference (`InterferenceCheckCommand`)- SOLID › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)- SOLID › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)+- SOLID › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)+- SOLID › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)+- SOLID › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)+- SOLID › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)+- SOLID › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)+- SOLID › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)+- SOLID › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)+- SOLID › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)- SOLID › INSERT › Decal (`FusionAddEditDecalCommand`)- SOLID › INSERT › Canvas (`FusionAddCanvasCommand`)- SOLID › INSERT › Insert SVG (`SketchImportSVG`)- SOLID › INSERT › Insert DXF (`ImportDxfFileCommand`)- SOLID › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)+- SOLID › INSERT › Insert Fastener (`FusionFastenersCommand`)- SOLID › POSITION › Capture Position (`SnapshotCmd`)- SOLID › POSITION › Revert Position (`AsBuiltPositionsCmd`)- SKETCH › CREATE › Line (`DrawPolyline`)@@ -238,16 +254,27 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SKETCH › CONSTRAINTS › Symmetry (`ConstraintSymmetry`)- SKETCH › CONSTRAINTS › Curvature (`ConstraintSmooth`)- SKETCH › CONSTRAINTS › Polygon (`SketchPolygonConstraintCmd`)+- SKETCH › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)+- SKETCH › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)- SKETCH › INSPECT › Measure (`MeasureCommand`)- SKETCH › INSPECT › Interference (`InterferenceCheckCommand`)- SKETCH › INSPECT › Section Analysis (`FusionHalfSectionViewCommand`)- SKETCH › INSPECT › Curvature Comb Analysis (`FusionCurvatureCombAnalysisCommand`)+- SKETCH › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)+- SKETCH › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)+- SKETCH › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)+- SKETCH › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)+- SKETCH › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)+- SKETCH › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)+- SKETCH › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)+- SKETCH › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)- SKETCH › INSERT › Decal (`FusionAddEditDecalCommand`)- SKETCH › INSERT › Canvas (`FusionAddCanvasCommand`)- SKETCH › INSERT › Insert SVG (`SketchImportSVG`)- SKETCH › INSERT › Insert DXF (`ImportDxfFileCommand`)- SKETCH › INSERT › Insert Mesh (`ParaMeshInsertAlignCommand`)- SKETCH › INSERT › Insert Component (`FusionImportCommandFromToolbar`)+- SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)- SKETCH › FINISH SKETCH › Finish Sketch (`SketchStop`)- SKETCH › FINISH SKETCH › Finish with AutoConstrain (`SketchAutoConstrainAndFinish`)@@ -288,13 +315,6 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SOLID › ASSEMBLE › Tangent Constraint (`TangentConstraintCmd`)- SOLID › ASSEMBLE › Joint Constraint (`JointConstraintCmd`)- SOLID › ASSEMBLE › As-Built Constraint (`AsBuiltConstraintCmd`)-- SOLID › ASSEMBLE › Motion Study (`FusionMotionStudyCommand`)-- SOLID › ASSEMBLE › Enable Contact Sets (`EnableContactSetsCmd`)-- SOLID › ASSEMBLE › Enable All Contact (`EnableAllContactCmd`)-- SOLID › ASSEMBLE › Disable Contact (`DisableAllContactCmd`)-- SOLID › ASSEMBLE › New Contact Set (`ContactSetCmd`)-- SOLID › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)-- SOLID › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)- SOLID › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)- SOLID › CONSTRUCT › User Coordinate System (UCS) (`CoordinateSystemCommand`)- SOLID › CONSTRUCT › Tangent Plane (`ConstructionTangentPlaneCommand`)@@ -314,15 +334,7 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SOLID › CONSTRUCT › Point At Center Of Circle/Sphere/Torus (`ConstructionPointFromCircleOrSphereCommand`)- SOLID › CONSTRUCT › Point At Edge And Plane (`ConstructionPointAtEdgeAndPlaneCommand`)- SOLID › CONSTRUCT › Point Along Path (`ConstructionPointAlongPathCommand`)-- SOLID › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)-- SOLID › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)-- SOLID › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)-- SOLID › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)- SOLID › INSPECT › Validate (`FusionSurfaceValidateCommand`)-- SOLID › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)-- SOLID › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)-- SOLID › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)-- SOLID › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)- SOLID › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)- SOLID › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)- SOLID › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)@@ -336,7 +348,6 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SOLID › INSPECT › History (`ShowHistoryToolbarCmd`)- SOLID › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)- SOLID › INSERT › Insert T-Spline (`TSplineImportCommand`)-- SOLID › INSERT › Insert Fastener (`FusionFastenersCommand`)- SOLID › INSERT › Insert Derive (`PullDeriveCommand`)- SOLID › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)- SOLID › INSERT › Insert a manufacturer part (`cadenasparts4cad`)@@ -357,18 +368,8 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SOLID › SELECT › Select Edge Priority (`SelectEdgePriorityCommand`)- SOLID › SELECT › Select Component Priority (`SelectComponentPriorityCommand`)- SOLID › SELECT › Selection Filters (`SelectionFilterCommand`)-- SKETCH › CONFIGURE › Configure (`FusionStartDesignConfigModeCmd`)-- SKETCH › CONFIGURE › Display Configuration Table (`FusionShowDesignConfigPanelCmd`)- SKETCH › CONFIGURE › Create Configuration Rules (`FusionConfigurationRulesCmd`)-- SKETCH › INSPECT › Curvature Map Analysis (`FusionCurvatureMapAnalysisCommand`)-- SKETCH › INSPECT › Draft Analysis (`FusionDraftAnalysisCommand`)-- SKETCH › INSPECT › Environment Map Analysis (`FusionEnvironmentMapAnalysisCommand`)-- SKETCH › INSPECT › Isocurve Analysis (`FusionIsoCurveAnalysisCommand`)- SKETCH › INSPECT › Validate (`FusionSurfaceValidateCommand`)-- SKETCH › INSPECT › Zebra Analysis (`FusionZebraAnalysisCommand`)-- SKETCH › INSPECT › Accessibility Analysis (`FusionAccessibilityAnalysisCommand`)-- SKETCH › INSPECT › Center of Mass (`FusionCenterOfMassCommand`)-- SKETCH › INSPECT › Minimum Radius Analysis (`FusionMinimumRadiusAnalysisCommand`)- SKETCH › INSPECT › Component Connection Analysis (`FusionComponentConnectionAnalysisCommand`)- SKETCH › INSPECT › DOF Analysis (`FusionDOFAnalysisCommand`)- SKETCH › INSPECT › Edit Component Connection Analysis (`FusionEditComponentConnectionAnalysisCommand`)@@ -382,7 +383,6 @@ Deferred until further notice (not in the in-scope figure): MESH, FORM, SURFACE- SKETCH › INSPECT › History (`ShowHistoryToolbarCmd`)- SKETCH › INSPECT › Sustainability Insights (`GravityClimate_ManufacturingSustainabilityInsights_MainDialog`)- SKETCH › INSERT › Insert T-Spline (`TSplineImportCommand`)-- SKETCH › INSERT › Insert Fastener (`FusionFastenersCommand`)- SKETCH › INSERT › Duplicate With Joints (`FusionDuplicateWithJointsCommand`)- SKETCH › INSERT › Insert Derive (`PullDeriveCommand`)- SKETCH › INSERT › Insert McMaster-Carr Component (`InsertMcMasterCarrComponentCommand`)