SolidCraft: an open-source parametric 3D CAD application built in pure Rust. Desktop, web, and automation through MCP.
Commits on main
The timeline scrolls sideways when its features don't fit the window: with more features than the window is wide, the features past the right edge were clipped and could not be reached
f33efa2 CypherNaugh_0x committed 1 month ago
Add nightly prereleases at midnight Eastern, skipping unchanged commits
31dadce bherbruck committed 1 month ago
Merge origin/main (with #86): sketch.dimension reports the solved value in the dimension's unit; the spout test expects the solved 30 and 60 degrees
ade30e9 CypherNaugh_0x committed 1 month ago
Extrude's start_offset says which way it goes: along the sketch normal, also with direction: negative (where a positive offset starts on the far side of the sketch from the extrusion)
1227fab CypherNaugh_0x committed 1 month ago
A sweep along a path with sharp corners follows the corners: sweeping a rim profile along three lines (an open rectangle) gave a body of volume -0.0006 mm3 with its centre of mass at x = -3.5e9, and no error
9a2a3ce CypherNaugh_0x committed 1 month ago
A round hole elsewhere on a body no longer breaks a loft cut beside it: a loft cut from a pocket floor (556.68 x 99 down 4 mm to 80 x 80), with a 35 mm hole 66 mm away that it never touches, failed with a kernel panic in TroughFall, while the same cut without the hole, or with the hole made afterwards, worked
3086c32 CypherNaugh_0x committed 1 month ago
Moving a body that a boolean made no longer hangs: a boolean between a cylinder and a tilted plane (an elliptical edge) froze the app at 100 % CPU, because its retries move both bodies and the result back
5249ae8 CypherNaugh_0x committed 1 month ago
A thin part trimmed by a long one is no longer refused as an implausible result: a 437 mm bar with a 3 mm concave arc in its profile, cut by a 920 mm prism with a top tilted 21 degrees, failed with "implausible result volume 3870" (it was 3694 before the cut)
f3a689f CypherNaugh_0x committed 1 month ago
A panic while healing a boolean result no longer ends the boolean: a shallow, wide loft cut from a top face (556.68 x 99 down 4 mm to 80 x 80 in a 900 x 480 x 160 slab) failed with "called Option::unwrap() on a None value"
f17ff91 CypherNaugh_0x committed 1 month ago
fix: select complete circular rims and curved surfaces in 3D
acf4669 bherbruck committed 1 month ago
ci: drop pages: write permission from Flatpak repository build job
96ee326 Dylan M. Taylor committed 1 month ago