Skip to content

Open-source platform for 3D AI agents. Turn text or a photo into a rigged, animated GLB avatar, give it an LLM brain, memory and a wallet, and embed it anywhere with one web component. Remote MCP server, x402 payments, Three.js, browser-native.

16.9 KB
Raw Blame
const format = require('../format-lines');
const { capitalize } = require('../../helpers');
const { TYPES } = require('./Arrays.opts');

const header = `\
pragma solidity ^0.8.24;

import {Comparators} from "./Comparators.sol";
import {SlotDerivation} from "./SlotDerivation.sol";
import {StorageSlot} from "./StorageSlot.sol";
import {Math} from "./math/Math.sol";

/**
 * @dev Collection of functions related to array types.
 */
`;

const sort = type => `\
/**
 * @dev Sort an array of ${type.name} (in memory) following the provided comparator function.
 *
 * This function does the sorting "in place", meaning that it overrides the input. The object is returned for
 * convenience, but that returned value can be discarded safely if the caller has a memory pointer to the array.
 *
 * NOTE: this function's cost is \`O(n · log(n))\` in average and \`O(n²)\` in the worst case, with n the length of the
 * array. Using it in view functions that are executed through \`eth_call\` is safe, but one should be very careful
 * when executing this as part of a transaction. If the array being sorted is too large, the sort operation may
 * consume more gas than is available in a block, leading to potential DoS.
 *
 * IMPORTANT: Consider memory side-effects when using custom comparator functions that access memory in an unsafe way.
 */
function sort(
    ${type.name}[] memory array,
    function(${type.name}, ${type.name}) pure returns (bool) comp
) internal pure returns (${type.name}[] memory) {
    ${
      type.name === 'uint256'
        ? '_quickSort(_begin(array), _end(array), comp);'
        : 'sort(_castToUint256Array(array), _castToUint256Comp(comp));'
    }
    return array;
}

/**
 * @dev Variant of {sort} that sorts an array of ${type.name} in increasing order.
 */
function sort(${type.name}[] memory array) internal pure returns (${type.name}[] memory) {
    ${type.name === 'uint256' ? 'sort(array, Comparators.lt);' : 'sort(_castToUint256Array(array), Comparators.lt);'}
    return array;
}
`;

const quickSort = `\
/**
 * @dev Performs a quick sort of a segment of memory. The segment sorted starts at \`begin\` (inclusive), and stops
 * at end (exclusive). Sorting follows the \`comp\` comparator.
 *
 * Invariant: \`begin <= end\`. This is the case when initially called by {sort} and is preserved in subcalls.
 *
 * IMPORTANT: Memory locations between \`begin\` and \`end\` are not validated/zeroed. This function should
 * be used only if the limits are within a memory array.
 */
function _quickSort(uint256 begin, uint256 end, function(uint256, uint256) pure returns (bool) comp) private pure {
    unchecked {
        if (end - begin < 0x40) return;

        // Use first element as pivot
        uint256 pivot = _mload(begin);
        // Position where the pivot should be at the end of the loop
        uint256 pos = begin;

        for (uint256 it = begin + 0x20; it < end; it += 0x20) {
            if (comp(_mload(it), pivot)) {
                // If the value stored at the iterator's position comes before the pivot, we increment the
                // position of the pivot and move the value there.
                pos += 0x20;
                _swap(pos, it);
            }
        }

        _swap(begin, pos); // Swap pivot into place
        _quickSort(begin, pos, comp); // Sort the left side of the pivot
        _quickSort(pos + 0x20, end, comp); // Sort the right side of the pivot
    }
}

/**
 * @dev Pointer to the memory location of the first element of \`array\`.
 */
function _begin(uint256[] memory array) private pure returns (uint256 ptr) {
    assembly ("memory-safe") {
        ptr := add(array, 0x20)
    }
}

/**
 * @dev Pointer to the memory location of the first memory word (32bytes) after \`array\`. This is the memory word
 * that comes just after the last element of the array.
 */
function _end(uint256[] memory array) private pure returns (uint256 ptr) {
    unchecked {
        return _begin(array) + array.length * 0x20;
    }
}

/**
 * @dev Load memory word (as a uint256) at location \`ptr\`.
 */
function _mload(uint256 ptr) private pure returns (uint256 value) {
    assembly {
        value := mload(ptr)
    }
}

/**
 * @dev Swaps the elements memory location \`ptr1\` and \`ptr2\`.
 */
function _swap(uint256 ptr1, uint256 ptr2) private pure {
    assembly {
        let value1 := mload(ptr1)
        let value2 := mload(ptr2)
        mstore(ptr1, value2)
        mstore(ptr2, value1)
    }
}
`;

const castArray = type => `\
/// @dev Helper: low level cast ${type.name} memory array to uint256 memory array
function _castToUint256Array(${type.name}[] memory input) private pure returns (uint256[] memory output) {
    assembly {
        output := input
    }
}
`;

const castComparator = type => `\
/// @dev Helper: low level cast ${type.name} comp function to uint256 comp function
function _castToUint256Comp(
    function(${type.name}, ${type.name}) pure returns (bool) input
) private pure returns (function(uint256, uint256) pure returns (bool) output) {
    assembly {
        output := input
    }
}
`;

const search = `\
/**
 * @dev Searches a sorted \`array\` and returns the first index that contains
 * a value greater or equal to \`element\`. If no such index exists (i.e. all
 * values in the array are strictly less than \`element\`), the array length is
 * returned. Time complexity O(log n).
 *
 * NOTE: The \`array\` is expected to be sorted in ascending order, and to
 * contain no repeated elements.
 *
 * IMPORTANT: Deprecated. This implementation behaves as {lowerBound} but lacks
 * support for repeated elements in the array. The {lowerBound} function should
 * be used instead.
 */
function findUpperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
    uint256 low = 0;
    uint256 high = array.length;

    if (high == 0) {
        return 0;
    }

    while (low < high) {
        uint256 mid = Math.average(low, high);

        // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
        // because Math.average rounds towards zero (it does integer division with truncation).
        if (unsafeAccess(array, mid).value > element) {
            high = mid;
        } else {
            low = mid + 1;
        }
    }

    // At this point \`low\` is the exclusive upper bound. We will return the inclusive upper bound.
    if (low > 0 && unsafeAccess(array, low - 1).value == element) {
        return low - 1;
    } else {
        return low;
    }
}

/**
 * @dev Searches an \`array\` sorted in ascending order and returns the first
 * index that contains a value greater or equal than \`element\`. If no such index
 * exists (i.e. all values in the array are strictly less than \`element\`), the array
 * length is returned. Time complexity O(log n).
 *
 * See C++'s https://en.cppreference.com/w/cpp/algorithm/lower_bound[lower_bound].
 */
function lowerBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
    uint256 low = 0;
    uint256 high = array.length;

    if (high == 0) {
        return 0;
    }

    while (low < high) {
        uint256 mid = Math.average(low, high);

        // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
        // because Math.average rounds towards zero (it does integer division with truncation).
        if (unsafeAccess(array, mid).value < element) {
            // this cannot overflow because mid < high
            unchecked {
                low = mid + 1;
            }
        } else {
            high = mid;
        }
    }

    return low;
}

/**
 * @dev Searches an \`array\` sorted in ascending order and returns the first
 * index that contains a value strictly greater than \`element\`. If no such index
 * exists (i.e. all values in the array are strictly less than \`element\`), the array
 * length is returned. Time complexity O(log n).
 *
 * See C++'s https://en.cppreference.com/w/cpp/algorithm/upper_bound[upper_bound].
 */
function upperBound(uint256[] storage array, uint256 element) internal view returns (uint256) {
    uint256 low = 0;
    uint256 high = array.length;

    if (high == 0) {
        return 0;
    }

    while (low < high) {
        uint256 mid = Math.average(low, high);

        // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
        // because Math.average rounds towards zero (it does integer division with truncation).
        if (unsafeAccess(array, mid).value > element) {
            high = mid;
        } else {
            // this cannot overflow because mid < high
            unchecked {
                low = mid + 1;
            }
        }
    }

    return low;
}

/**
 * @dev Same as {lowerBound}, but with an array in memory.
 */
function lowerBoundMemory(uint256[] memory array, uint256 element) internal pure returns (uint256) {
    uint256 low = 0;
    uint256 high = array.length;

    if (high == 0) {
        return 0;
    }

    while (low < high) {
        uint256 mid = Math.average(low, high);

        // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
        // because Math.average rounds towards zero (it does integer division with truncation).
        if (unsafeMemoryAccess(array, mid) < element) {
            // this cannot overflow because mid < high
            unchecked {
                low = mid + 1;
            }
        } else {
            high = mid;
        }
    }

    return low;
}

/**
 * @dev Same as {upperBound}, but with an array in memory.
 */
function upperBoundMemory(uint256[] memory array, uint256 element) internal pure returns (uint256) {
    uint256 low = 0;
    uint256 high = array.length;

    if (high == 0) {
        return 0;
    }

    while (low < high) {
        uint256 mid = Math.average(low, high);

        // Note that mid will always be strictly less than high (i.e. it will be a valid array index)
        // because Math.average rounds towards zero (it does integer division with truncation).
        if (unsafeMemoryAccess(array, mid) > element) {
            high = mid;
        } else {
            // this cannot overflow because mid < high
            unchecked {
                low = mid + 1;
            }
        }
    }

    return low;
}
`;

const unsafeAccessStorage = type => `\
/**
 * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
 *
 * WARNING: Only use if you are certain \`pos\` is lower than the array length.
 */
function unsafeAccess(${type.name}[] storage arr, uint256 pos) internal pure returns (StorageSlot.${capitalize(
  type.name,
)}Slot storage) {
    bytes32 slot;
    assembly ("memory-safe") {
        slot := arr.slot
    }
    return slot.deriveArray().offset(pos).get${capitalize(type.name)}Slot();
}
`;

const unsafeAccessMemory = type => `\
/**
 * @dev Access an array in an "unsafe" way. Skips solidity "index-out-of-range" check.
 *
 * WARNING: Only use if you are certain \`pos\` is lower than the array length.
 */
function unsafeMemoryAccess(${type.name}[] memory arr, uint256 pos) internal pure returns (${type.name}${
  type.isValueType ? '' : ' memory'
} res) {
    assembly {
        res := mload(add(add(arr, 0x20), mul(pos, 0x20)))
    }
}
`;

const unsafeSetLength = type => `\
/**
 * @dev Helper to set the length of a dynamic array. Directly writing to \`.length\` is forbidden.
 *
 * WARNING: this does not clear elements if length is reduced, or initialize elements if length is increased.
 */
function unsafeSetLength(${type.name}[] storage array, uint256 len) internal {
    assembly ("memory-safe") {
        sstore(array.slot, len)
    }
}
`;

const slice = type => `\
/**
 * @dev Copies the content of \`array\`, from \`start\` (included) to the end of \`array\` into a new ${type.name} array in
 * memory.
 *
 * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's \`Array.slice\`]
 */
function slice(${type.name}[] memory array, uint256 start) internal pure returns (${type.name}[] memory) {
    return slice(array, start, array.length);
}

/**
 * @dev Copies the content of \`array\`, from \`start\` (included) to \`end\` (excluded) into a new ${type.name} array in
 * memory. The \`end\` argument is truncated to the length of the \`array\`.
 *
 * NOTE: replicates the behavior of https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/slice[Javascript's \`Array.slice\`]
 */
function slice(${type.name}[] memory array, uint256 start, uint256 end) internal pure returns (${type.name}[] memory) {
    // sanitize
    end = Math.min(end, array.length);
    start = Math.min(start, end);

    // allocate and copy
    ${type.name}[] memory result = new ${type.name}[](end - start);
    assembly ("memory-safe") {
        mcopy(add(result, 0x20), add(add(array, 0x20), mul(start, 0x20)), mul(sub(end, start), 0x20))
    }

    return result;
}
`;

const splice = type => `\
/**
 * @dev Moves the content of \`array\`, from \`start\` (included) to the end of \`array\` to the start of that array,
 * and shrinks the array length accordingly, effectively overwriting the array with array[start:].
 *
 * NOTE: This function modifies the provided array in place. If you need to preserve the original array, use {slice} instead.
 */
function splice(${type.name}[] memory array, uint256 start) internal pure returns (${type.name}[] memory) {
    return splice(array, start, array.length);
}

/**
 * @dev Moves the content of \`array\`, from \`start\` (included) to \`end\` (excluded) to the start of that array,
 * and shrinks the array length accordingly, effectively overwriting the array with array[start:end]. The
 * \`end\` argument is truncated to the length of the \`array\`.
 *
 * NOTE: This function modifies the provided array in place. If you need to preserve the original array, use {slice} instead.
 */
function splice(${type.name}[] memory array, uint256 start, uint256 end) internal pure returns (${type.name}[] memory) {
    // sanitize
    end = Math.min(end, array.length);
    start = Math.min(start, end);

    // move and resize
    assembly ("memory-safe") {
        mcopy(add(array, 0x20), add(add(array, 0x20), mul(start, 0x20)), mul(sub(end, start), 0x20))
        mstore(array, sub(end, start))
    }

    return array;
}

/**
 * @dev Replaces elements in \`array\` starting at \`pos\` with all elements from \`replacement\`.
 *
 * Parameters are clamped to valid ranges (e.g. \`pos\` is clamped to \`[0, array.length]\`).
 * If \`pos >= array.length\`, no replacement occurs and the array is returned unchanged.
 *
 * NOTE: This function modifies the provided array in place.
 */
function replace(
    ${type.name}[] memory array,
    uint256 pos,
    ${type.name}[] memory replacement
) internal pure returns (${type.name}[] memory) {
    return replace(array, pos, replacement, 0, replacement.length);
}

/**
 * @dev Replaces elements in \`array\` starting at \`pos\` with elements from \`replacement\` starting at \`offset\`.
 * Copies at most \`length\` elements from \`replacement\` to \`array\`.
 *
 * Parameters are clamped to valid ranges (i.e. \`pos\` is clamped to \`[0, array.length]\`, \`offset\` is
 * clamped to \`[0, replacement.length]\`, and \`length\` is clamped to \`min(length, replacement.length - offset,
 * array.length - pos)\`). If \`pos >= array.length\` or \`offset >= replacement.length\`, no replacement occurs
 * and the array is returned unchanged.
 *
 * NOTE: This function modifies the provided array in place.
 */
function replace(
    ${type.name}[] memory array,
    uint256 pos,
    ${type.name}[] memory replacement,
    uint256 offset,
    uint256 length
) internal pure returns (${type.name}[] memory) {
    // sanitize
    pos = Math.min(pos, array.length);
    offset = Math.min(offset, replacement.length);
    length = Math.min(length, Math.min(replacement.length - offset, array.length - pos));

    // replace
    assembly ("memory-safe") {
        mcopy(
            add(add(array, 0x20), mul(pos, 0x20)),
            add(add(replacement, 0x20), mul(offset, 0x20)),
            mul(length, 0x20)
        )
    }

    return array;
}
`;

// GENERATE
module.exports = format(
  header.trimEnd(),
  'library Arrays {',
  format(
    [].concat(
      'using SlotDerivation for bytes32;',
      'using StorageSlot for bytes32;',
      '',
      // sorting, comparator, helpers and internal
      sort({ name: 'uint256' }),
      TYPES.filter(type => type.isValueType && type.name !== 'uint256').map(sort),
      quickSort,
      TYPES.filter(type => type.isValueType && type.name !== 'uint256').map(castArray),
      TYPES.filter(type => type.isValueType && type.name !== 'uint256').map(castComparator),
      // lookup
      search,
      // slice and splice for value types only
      TYPES.filter(type => type.isValueType).map(slice),
      TYPES.filter(type => type.isValueType).map(splice),
      // unsafe (direct) storage and memory access
      TYPES.map(unsafeAccessStorage),
      TYPES.map(unsafeAccessMemory),
      TYPES.map(unsafeSetLength),
    ),
  ).trimEnd(),
  '}',
);