Skip to content

Local UI to run and train LLMs and diffusion models. Supports GGUF, MLX, Qwen3.8, DeepSeek-V4.1, MiniMax-H3, Gemma 4, FLUX and more.

24.4 KB
Raw Blame
#!/bin/sh
# SPDX-License-Identifier: AGPL-3.0-only
# Copyright 2026-present the Unsloth AI Inc. team. All rights reserved. See /studio/LICENSE.AGPL-3.0
set -e

SCRIPT_DIR=$(CDPATH= cd -- "$(dirname "$0")" && pwd)
. "$SCRIPT_DIR/_harness.sh"
INSTALL_SH="$SCRIPT_DIR/../../install.sh"
HELPERS=$(awk '
    /^_configure_uv_cache\(\) \{/ { grab = 1 }
    /^_prepare_studio_uv_cache_for_launch\(\) \{/ { grab = 1 }
    /^_record_uv_cache_choice\(\) \{/ { grab = 1 }
    /^_uv_is_bucket_name\(\) \{/ { grab = 1 }
    /^_uv_no_cache_requested\(\) \{/ { grab = 1 }
    /^_uv_cache_root_is_writable\(\) \{/ { grab = 1 }
    /^_uv_cache_is_writable\(\) \{/ { grab = 1 }
    /^_absolutize_uv_cache_dir\(\) \{/ { grab = 1 }
    /^_restore_uv_cache_marker\(\) \{/ { grab = 1 }
    grab { print }
    grab && /^}/ { grab = 0 }
' "$INSTALL_SH")
for _helper in _configure_uv_cache _prepare_studio_uv_cache_for_launch _record_uv_cache_choice \
    _restore_uv_cache_marker _absolutize_uv_cache_dir _uv_is_bucket_name \
    _uv_cache_root_is_writable _uv_cache_is_writable _uv_no_cache_requested; do
    if ! printf '%s\n' "$HELPERS" | grep -q "^${_helper}() {"; then
        echo "  FAIL: could not extract $_helper from install.sh"
        exit 1
    fi
done

WORK=$(mktemp -d)
PROBE="$WORK/probe.sh"
UV_STUB_DIR="$WORK/bin"
export UV_STUB_DIR
trap 'rm -rf "$WORK"' EXIT INT TERM
mkdir -p "$UV_STUB_DIR"
cat > "$UV_STUB_DIR/uv" <<'UV'
#!/bin/sh
[ "$1" = cache ] && [ "$2" = dir ] || exit 2
printf '%s\n' "$TEST_UV_EFFECTIVE_CACHE"
UV
chmod +x "$UV_STUB_DIR/uv"
printf '%s\n' "$HELPERS" > "$PROBE"
cat >> "$PROBE" <<'PROBE'
step() { printf 'message=%s\n' "$2"; }
C_WARN=""
case "$1" in
    unset) unset UV_CACHE_DIR ;;
    value) UV_CACHE_DIR=$2 ;;
    *) exit 2 ;;
esac
_ISOLATE_UV_CACHE=$3
HOME=$4
case "$5" in
    unset) unset XDG_CACHE_HOME ;;
    value) XDG_CACHE_HOME=$6 ;;
    *) exit 2 ;;
esac
STUDIO_HOME=$7

TEST_UV_EFFECTIVE_CACHE=$9
export TEST_UV_EFFECTIVE_CACHE
PATH="$UV_STUB_DIR:$PATH"
export PATH
_configure_uv_cache
_child=$($8 -c 'printf "%s" "${UV_CACHE_DIR+x}:$UV_CACHE_DIR"')
printf 'value=%s\nmode=%s\nchild=%s\n' "$UV_CACHE_DIR" "$_UV_CACHE_MODE" "$_child"
_prepare_studio_uv_cache_for_launch
printf 'launch=%s\n' "$UV_CACHE_DIR"
PROBE

run_case() { # shell, label, state, input, isolate, home, xdg-state, xdg, root, effective, value, mode, message, launch
    _shell=$1
    _label=$2
    _state=$3
    _input=$4
    _isolate=$5
    _home=$6
    _xdg_state=$7
    _xdg=$8
    _root=$9
    shift 9
    _effective=$1
    _expected=$2
    _mode=$3
    _message=$4
    _launch=$5
    # The marker is a selector input and cases share one root, so each starts from _PRESET_MARKER.
    if [ "${_KEEP_MARKER:-0}" != 1 ]; then
        rm -f "$_root/cache/uv-cache-dir" 2>/dev/null || true
        if [ -n "${_PRESET_MARKER:-}" ]; then
            mkdir -p "$_root/cache" 2>/dev/null || true
            printf '%s\n' "$_PRESET_MARKER" > "$_root/cache/uv-cache-dir" 2>/dev/null || true
        fi
    fi
    _actual=$($_shell "$PROBE" "$_state" "$_input" "$_isolate" "$_home" "$_xdg_state" "$_xdg" "$_root" "$_shell" "$_effective")
    _wanted=$(printf 'message=%s\nvalue=%s\nmode=%s\nchild=x:%s\nlaunch=%s' \
        "$_message" "$_expected" "$_mode" "$_expected" "$_launch")
    if [ "$_actual" = "$_wanted" ]; then
        ok "$_shell: $_label"
    else
        bad "$_shell: $_label (expected [$_wanted], got [$_actual])"
    fi
}

echo "=== test_install_uv_cache_root ==="
for shell in sh bash; do
    command -v "$shell" >/dev/null 2>&1 || continue
    CASE="$WORK/$shell case"
    HOME_DIR="$CASE/home with spaces"
    XDG_DIR="$CASE/xdg with spaces"
    ROOT="$CASE/studio root"
    STUDIO_CACHE="$ROOT/cache/uv"
    HOME_CACHE="$HOME_DIR/.cache/uv"
    XDG_CACHE="$XDG_DIR/uv"
    OVERRIDE="$CASE/caller cache/uv artifacts"
    mkdir -p "$HOME_DIR" "$ROOT"

    run_case "$shell" "missing default selects Studio" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$HOME_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"

    mkdir -p "$HOME_CACHE/CACHEDIR.TAG/inside"
    : > "$HOME_CACHE/CACHEDIR.TAG/inside/payload"
    : > "$HOME_CACHE/.gitignore"
    run_case "$shell" "marker-only default stays Studio and is not traversed" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$HOME_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"
    if [ -f "$HOME_CACHE/CACHEDIR.TAG/inside/payload" ] && [ -f "$HOME_CACHE/.gitignore" ]; then
        ok "$shell: marker-only probe is non-destructive"
    else
        bad "$shell: marker-only probe modified the shared cache"
    fi

    mkdir -p "$HOME_CACHE/sdists-v9" "$HOME_CACHE/interpreter-v4/key"
    : > "$HOME_CACHE/sdists-v9/.git"
    : > "$HOME_CACHE/sdists-v9/.gitignore"
    : > "$HOME_CACHE/interpreter-v4/key/metadata.msgpack"
    : > "$HOME_CACHE/.lock"
    run_case "$shell" "uv venv scaffolding stays Studio-owned" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$HOME_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"

    mkdir -p "$HOME_CACHE/archive-v0/package"
    : > "$HOME_CACHE/archive-v0/package/payload.py"
    run_case "$shell" "populated HOME cache is reused" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$HOME_CACHE" "$HOME_CACHE" shared \
        "reusing existing shared cache ($HOME_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    run_case "$shell" "blank override still reuses populated default" value "   " false \
        "$HOME_DIR" unset "" "$ROOT" "$HOME_CACHE" "$HOME_CACHE" shared \
        "reusing existing shared cache ($HOME_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    mkdir -p "$XDG_CACHE/wheels-v5/package"
    : > "$XDG_CACHE/wheels-v5/package/cached.whl"
    run_case "$shell" "XDG default wins over HOME" unset "" false \
        "$HOME_DIR" value "$XDG_DIR" "$ROOT" "$XDG_CACHE" "$XDG_CACHE" shared \
        "reusing existing shared cache ($XDG_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    EMPTY_XDG="$CASE/empty xdg"
    EMPTY_XDG_CACHE="$EMPTY_XDG/uv"
    mkdir -p "$EMPTY_XDG_CACHE"
    run_case "$shell" "empty XDG does not fall back to populated HOME" unset "" false \
        "$HOME_DIR" value "$EMPTY_XDG" "$ROOT" "$EMPTY_XDG_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"

    CONFIG_CACHE="$CASE/uv.toml cache"
    mkdir -p "$CONFIG_CACHE/wheels-v5/package"
    : > "$CONFIG_CACHE/wheels-v5/package/torch.whl"
    run_case "$shell" "uv-configured cache is resolved and reused" unset "" false \
        "$HOME_DIR" value "$EMPTY_XDG" "$ROOT" "$CONFIG_CACHE" "$CONFIG_CACHE" shared \
        "reusing existing shared cache ($CONFIG_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    run_case "$shell" "custom override is exact" value "$OVERRIDE" false \
        "$HOME_DIR" value "$XDG_DIR" "$ROOT" "$XDG_CACHE" "$OVERRIDE" custom \
        "preserving custom UV_CACHE_DIR ($OVERRIDE)" "$OVERRIDE"

    run_case "$shell" "custom override wins over isolation" value "$OVERRIDE" true \
        "$HOME_DIR" value "$XDG_DIR" "$ROOT" "$XDG_CACHE" "$OVERRIDE" custom \
        "preserving custom UV_CACHE_DIR ($OVERRIDE)" "$OVERRIDE"

    run_case "$shell" "forced isolation uses Studio despite populated default" unset "" true \
        "$HOME_DIR" value "$XDG_DIR" "$ROOT" "$XDG_CACHE" "$STUDIO_CACHE" isolated \
        "forced Unsloth Studio cache isolation ($STUDIO_CACHE); already-cached packages may download again" "$STUDIO_CACHE"

    run_case "$shell" "unresolvable default safely selects Studio" unset "" false \
        "" unset "" "$ROOT" "" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"

    # wheels-v* is .msgpack/.http only on uv 0.10: one `--dry-run` leaves a file.
    META_CACHE="$CASE/metadata only/uv"
    mkdir -p "$META_CACHE/wheels-v6/pypi/torch" "$META_CACHE/simple-v20/pypi" \
        "$META_CACHE/sdists-v9/pypi/pkg"
    : > "$META_CACHE/wheels-v6/pypi/torch/2.11.0-cp313-none-any.msgpack"
    : > "$META_CACHE/wheels-v6/pypi/torch/2.11.0.http"
    : > "$META_CACHE/simple-v20/pypi/torch.rkyv"
    : > "$META_CACHE/sdists-v9/pypi/pkg/revision.rev"
    : > "$META_CACHE/sdists-v9/pypi/pkg/download.lock"
    run_case "$shell" "metadata-only default is not a warm cache" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$META_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"

    mkdir -p "$META_CACHE/archive-v0/hash/torch"
    : > "$META_CACHE/archive-v0/hash/torch/_C.so"
    run_case "$shell" "package bytes beside metadata do count" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$META_CACHE" "$META_CACHE" shared \
        "reusing existing shared cache ($META_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    # builds-v* is what modern uv calls the old built-wheels-* bucket.
    BUILDS_CACHE="$CASE/builds cache/uv"
    mkdir -p "$BUILDS_CACHE/builds-v0/pkg"
    : > "$BUILDS_CACHE/builds-v0/pkg/module.py"
    run_case "$shell" "builds-v0 counts as package data" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$BUILDS_CACHE" shared \
        "reusing existing shared cache ($BUILDS_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"

    # `find` needs -L to descend a symlink; Get-ChildItem -Recurse already does.
    LINK_CACHE="$CASE/symlinked bucket/uv"
    LINK_TARGET="$CASE/symlinked bucket/elsewhere"
    mkdir -p "$LINK_CACHE" "$LINK_TARGET/pkg"
    : > "$LINK_TARGET/pkg/payload.so"
    if ln -s "$LINK_TARGET" "$LINK_CACHE/archive-v0" 2>/dev/null; then
        run_case "$shell" "symlinked bucket is still inspected" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$LINK_CACHE" "$LINK_CACHE" shared \
            "reusing existing shared cache ($LINK_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
            "$STUDIO_CACHE"
    fi

    # Unreadable is not empty: falling back is right, doing it silently is not.
    DENIED_CACHE="$CASE/denied bucket/uv"
    mkdir -p "$DENIED_CACHE/archive-v0/pkg"
    : > "$DENIED_CACHE/archive-v0/pkg/payload.so"
    if [ "$(id -u 2>/dev/null || echo 0)" != 0 ] && chmod 000 "$DENIED_CACHE/archive-v0" 2>/dev/null; then
        run_case "$shell" "unreadable bucket says why it fell back" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$DENIED_CACHE" "$STUDIO_CACHE" studio \
            "using new Unsloth Studio-owned cache ($STUDIO_CACHE); part of $DENIED_CACHE could not be read, so cached packages may download again" \
            "$STUDIO_CACHE"
        chmod 755 "$DENIED_CACHE/archive-v0" 2>/dev/null || true
    fi

    DEEP_CACHE="$CASE/denied leaf/uv"
    mkdir -p "$DEEP_CACHE/archive-v0/visible" "$DEEP_CACHE/archive-v0/aaa hidden"
    : > "$DEEP_CACHE/archive-v0/visible/payload.so"
    : > "$DEEP_CACHE/archive-v0/aaa hidden/other.so"
    if [ "$(id -u 2>/dev/null || echo 0)" != 0 ] && chmod 000 "$DEEP_CACHE/archive-v0/aaa hidden" 2>/dev/null; then
        run_case "$shell" "unreadable leaf keeps a warm cache warm" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$DEEP_CACHE" "$DEEP_CACHE" shared \
            "reusing existing shared cache ($DEEP_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
            "$STUDIO_CACHE"
        chmod 755 "$DEEP_CACHE/archive-v0/aaa hidden" 2>/dev/null || true
    fi

    # Content cannot tell an installer-filled Studio cache from one a runtime install touched.
    MARKER="$ROOT/cache/uv-cache-dir"
    check_marker() { # label, expected
        if [ "$(cat "$MARKER" 2>/dev/null)" = "$2" ]; then
            ok "$shell: $1"
        else
            bad "$shell: $1 (expected [$2], got [$(cat "$MARKER" 2>/dev/null)])"
        fi
    }

    rm -f "$MARKER"
    EMPTY_CACHE="$CASE/unrecorded/uv"
    run_case "$shell" "studio mode still selects the Studio cache" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$EMPTY_CACHE" "$STUDIO_CACHE" studio \
        "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"
    check_marker "studio mode records the Studio cache" "$STUDIO_CACHE"

    rm -f "$MARKER"
    run_case "$shell" "shared mode still selects the shared cache" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$BUILDS_CACHE" shared \
        "reusing existing shared cache ($BUILDS_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"
    check_marker "shared mode records the shared cache, not the Studio one" "$BUILDS_CACHE"

    # uv's default reads as warm on one unrelated wheel; switching would re-download Torch and CUDA.
    mkdir -p "$STUDIO_CACHE/archive-v0/torch"
    : > "$STUDIO_CACHE/archive-v0/torch/libtorch.so"
    _PRESET_MARKER="$STUDIO_CACHE"
    run_case "$shell" "a warm recorded Studio cache outranks a warm default" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$STUDIO_CACHE" studio \
        "reusing this install's Unsloth Studio cache ($STUDIO_CACHE)" "$STUDIO_CACHE"
    run_case "$shell" "isolation still wins over a warm marker" unset "" true \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$STUDIO_CACHE" isolated \
        "forced Unsloth Studio cache isolation ($STUDIO_CACHE); already-cached packages may download again" \
        "$STUDIO_CACHE"
    # A marker naming an existing but cold cache loses to uv's default.
    mkdir -p "$CASE/coldrec/uv"
    _PRESET_MARKER="$CASE/coldrec/uv"
    run_case "$shell" "a cold recorded cache falls through to shared" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$BUILDS_CACHE" shared \
        "reusing existing shared cache ($BUILDS_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
        "$STUDIO_CACHE"
    # A marker naming a missing dir is a stale pointer: abandoning cached Torch for uv's default
    # breaks offline installs.
    _PRESET_MARKER="$CASE/gone/uv"
    run_case "$shell" "a marker naming a deleted cache keeps Studio" unset "" false \
        "$HOME_DIR" unset "" "$ROOT" "$STUDIO_CACHE" "$STUDIO_CACHE" studio \
        "reusing this install's Unsloth Studio cache ($STUDIO_CACHE)" \
        "$STUDIO_CACHE"
    _PRESET_MARKER=""
    rm -rf "$STUDIO_CACHE"

    _KEEP_MARKER=1
    rm -f "$MARKER"
    run_case "$shell" "isolation still forces the Studio cache" unset "" true \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$STUDIO_CACHE" isolated \
        "forced Unsloth Studio cache isolation ($STUDIO_CACHE); already-cached packages may download again" \
        "$STUDIO_CACHE"
    check_marker "isolated mode records the Studio cache" "$STUDIO_CACHE"

    # A custom cache is recorded too; the caller still wins on any run that sets the variable.
    printf '%s\n' "$STUDIO_CACHE" > "$MARKER"
    run_case "$shell" "custom mode is still preserved" value "$OVERRIDE" false \
        "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$OVERRIDE" custom \
        "preserving custom UV_CACHE_DIR ($OVERRIDE)" "$OVERRIDE"
    check_marker "custom mode replaces an earlier install's marker" "$OVERRIDE"

    # A symlinked marker is replaced, not followed: a redirection truncates its target.
    rm -rf "$ROOT/cache"; mkdir -p "$ROOT/cache"
    VICTIM="$CASE/someone elses file"
    printf 'do not clobber\n' > "$VICTIM"
    ln -s "$VICTIM" "$ROOT/cache/uv-cache-dir" 2>/dev/null && {
        run_case "$shell" "a symlinked marker is replaced, not followed" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$EMPTY_CACHE" "$STUDIO_CACHE" studio \
            "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"
        if [ "$(cat "$VICTIM")" = "do not clobber" ] && [ ! -L "$ROOT/cache/uv-cache-dir" ]; then
            ok "$shell: the symlink target was left alone"
        else
            bad "$shell: writing the marker followed a symlink"
        fi
    }

    rm -rf "$ROOT/cache"; mkdir -p "$ROOT/cache"
    printf '%s\n' "/previous/install/cache" > "$MARKER"
    if [ "$(id -u 2>/dev/null || echo 0)" != 0 ] && chmod 200 "$MARKER" 2>/dev/null; then
        run_case "$shell" "an unreadable marker does not fail the install" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$EMPTY_CACHE" "$STUDIO_CACHE" studio \
            "using new Unsloth Studio-owned cache ($STUDIO_CACHE)" "$STUDIO_CACHE"
        chmod 600 "$MARKER" 2>/dev/null || true
        if [ "$(cat "$MARKER")" = "/previous/install/cache" ]; then
            ok "$shell: an unreadable marker is left as it was"
        else
            bad "$shell: an unreadable marker was overwritten ([$(cat "$MARKER")])"
        fi
    fi

    _KEEP_MARKER=0

    # uv resolves a relative cache against its working dir, which --directory and UV_WORKING_DIR move.
    rm -rf "$ROOT/cache"
    WORKDIR_PROBE="$WORK/$shell workdir.sh"
    {
        printf '%s\n' "$HELPERS"
        cat <<WORKDIR
step() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
cd '$CASE'
UV_WORKING_DIR='$CASE/uvdir'; export UV_WORKING_DIR
UV_CACHE_DIR='relcache'
_record_uv_cache_choice
cat '$MARKER'
WORKDIR
    } > "$WORKDIR_PROBE"
    _wd=$($shell "$WORKDIR_PROBE")
    if [ "$_wd" = "$CASE/uvdir/relcache" ]; then
        ok "$shell: a relative cache is recorded against uv's working directory"
    else
        bad "$shell: recorded [$_wd], wanted [$CASE/uvdir/relcache]"
    fi

    rm -rf "$ROOT/cache"
    REL_PROBE="$WORK/$shell relworkdir.sh"
    {
        printf '%s\n' "$HELPERS"
        cat <<RELWD
step() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
cd '$CASE'
UV_WORKING_DIR='uvdir'; export UV_WORKING_DIR
UV_CACHE_DIR='relcache'
_record_uv_cache_choice
cat '$MARKER'
RELWD
    } > "$REL_PROBE"
    _rw=$($shell "$REL_PROBE")
    if [ "$_rw" = "$CASE/uvdir/relcache" ]; then
        ok "$shell: a relative UV_WORKING_DIR is anchored before the cache is appended"
    else
        bad "$shell: recorded [$_rw], wanted [$CASE/uvdir/relcache]"
    fi

    ROLLBACK_PROBE="$WORK/$shell rollback.sh"
    {
        printf '%s\n' "$HELPERS"
        cat <<ROLLBACK
step() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
_UV_MARKER_EXISTED=false
_UV_MARKER_PREVIOUS=""
UV_CACHE_DIR='$BUILDS_CACHE'
_record_uv_cache_choice
printf 'during=%s\n' "\$(cat '$MARKER')"
_restore_uv_cache_marker
if [ -f '$MARKER' ]; then printf 'after=%s\n' "\$(cat '$MARKER')"; else printf 'after=<gone>\n'; fi
ROLLBACK
    } > "$ROLLBACK_PROBE"

    printf '%s\n' "$STUDIO_CACHE" > "$MARKER"
    _rb=$($shell "$ROLLBACK_PROBE")
    if [ "$_rb" = "$(printf 'during=%s\nafter=%s' "$BUILDS_CACHE" "$STUDIO_CACHE")" ]; then
        ok "$shell: a rolled-back install restores the previous marker"
    else
        bad "$shell: rollback did not restore the marker (got [$_rb])"
    fi

    rm -f "$MARKER"
    _rb=$($shell "$ROLLBACK_PROBE")
    if [ "$_rb" = "$(printf 'during=%s\nafter=<gone>' "$BUILDS_CACHE")" ]; then
        ok "$shell: a rolled-back first install leaves no marker behind"
    else
        bad "$shell: rollback left a marker on a first install (got [$_rb])"
    fi

    # Absolute, because the update resolves the marker against its own directory.
    RELATIVE_PROBE="$WORK/$shell relative.sh"
    {
        printf '%s\n' "$HELPERS"
        cat <<RELATIVE
step() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
cd '$CASE'
UV_CACHE_DIR='relcache'
_record_uv_cache_choice
cat '$MARKER'
RELATIVE
    } > "$RELATIVE_PROBE"
    rm -f "$MARKER"
    _rel=$($shell "$RELATIVE_PROBE")
    if [ "$_rel" = "$CASE/relcache" ]; then
        ok "$shell: a relative cache is recorded absolute"
    else
        bad "$shell: relative cache recorded as [$_rel], wanted [$CASE/relcache]"
    fi

    # setup.sh changes into its own dir before the dependency pass, so the export must be absolute.
    EXPORT_PROBE="$WORK/$shell custom export.sh"
    {
        printf '%s\n' "$HELPERS"
        cat <<EXPORTED
step() { :; }
substep() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
cd '$CASE'
UV_CACHE_DIR='relcache'
_configure_uv_cache
printf '%s\n' "\$UV_CACHE_DIR"
EXPORTED
    } > "$EXPORT_PROBE"
    rm -f "$MARKER"
    _exp=$($shell "$EXPORT_PROBE")
    if [ "$_exp" = "$CASE/relcache" ]; then
        ok "$shell: a relative custom cache is exported absolute"
    else
        bad "$shell: custom cache exported as [$_exp], wanted [$CASE/relcache]"
    fi

    # UV_NO_CACHE leaves UV_CACHE_DIR empty (uv 0.10.7), so recording it would point the next
    # repair at a cache this install never filled.
    NOCACHE_PROBE="$WORK/$shell nocache.sh"
    for _nc_mode in custom isolated; do
        {
            printf '%s\n' "$HELPERS"
            cat <<NOCACHED
step() { :; }
substep() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
UV_NO_CACHE=1
export UV_NO_CACHE
NOCACHED
            if [ "$_nc_mode" = custom ]; then
                printf "UV_CACHE_DIR='%s'\n_ISOLATE_UV_CACHE=false\n" "$OVERRIDE"
            else
                printf "unset UV_CACHE_DIR\n_ISOLATE_UV_CACHE=true\n"
            fi
            printf '%s\n' '_configure_uv_cache' 'printf "%s" "$_UV_CACHE_MODE"'
        } > "$NOCACHE_PROBE"
        rm -f "$MARKER"
        _nc_out=$($shell "$NOCACHE_PROBE")
        if [ "$_nc_out" = "$_nc_mode" ] && [ ! -e "$MARKER" ]; then
            ok "$shell: $_nc_mode under UV_NO_CACHE records nothing"
        else
            bad "$shell: $_nc_mode under UV_NO_CACHE (mode [$_nc_out], marker [$(cat "$MARKER" 2>/dev/null)])"
        fi
    done
    for _nc_mode in custom isolated; do
        {
            printf '%s\n' "$HELPERS"
            cat <<RECORDED
step() { :; }
substep() { :; }
STUDIO_HOME='$ROOT'
_UV_MARKER_SAVED=false
unset UV_NO_CACHE
RECORDED
            if [ "$_nc_mode" = custom ]; then
                printf "UV_CACHE_DIR='%s'\n_ISOLATE_UV_CACHE=false\n" "$OVERRIDE"
            else
                printf "unset UV_CACHE_DIR\n_ISOLATE_UV_CACHE=true\n"
            fi
            printf '%s\n' '_configure_uv_cache' 'printf "%s" "$_UV_CACHE_MODE"'
        } > "$NOCACHE_PROBE"
        rm -f "$MARKER"
        _nc_out=$($shell "$NOCACHE_PROBE")
        if [ "$_nc_out" = "$_nc_mode" ] && [ -s "$MARKER" ]; then
            ok "$shell: $_nc_mode still records without UV_NO_CACHE"
        else
            bad "$shell: $_nc_mode without UV_NO_CACHE (mode [$_nc_out], marker [$(cat "$MARKER" 2>/dev/null)])"
        fi
    done
    rm -f "$MARKER"

    # An unwritable STUDIO_HOME skips the marker, never fails the install.
    rm -rf "$ROOT/cache"
    if [ "$(id -u 2>/dev/null || echo 0)" != 0 ] && mkdir -p "$ROOT" && chmod 500 "$ROOT" 2>/dev/null; then
        # The launch keeps the shared cache: repointing at the Studio one with an unwritable root
        # would hand the backend a cache uv aborts on.
        run_case "$shell" "an unwritable Studio root still installs" unset "" false \
            "$HOME_DIR" unset "" "$ROOT" "$BUILDS_CACHE" "$BUILDS_CACHE" shared \
            "reusing existing shared cache ($BUILDS_CACHE) to avoid duplicate Torch/CUDA downloads; use --isolated-uv-cache to isolate" \
            "$BUILDS_CACHE"
        chmod 755 "$ROOT" 2>/dev/null || true
    fi
done

_resolve_line=$(grep -n '^_resolve_studio_destinations$' "$INSTALL_SH" | head -n1 | cut -d: -f1)
_configure_line=$(grep -n '^_configure_uv_cache$' "$INSTALL_SH" | head -n1 | cut -d: -f1)
_uv_line=$(grep -n '^# ── Install uv ──$' "$INSTALL_SH" | head -n1 | cut -d: -f1)
_venv_line=$(grep -n '^# ── Create venv ' "$INSTALL_SH" | head -n1 | cut -d: -f1)
if [ -n "$_resolve_line" ] && [ -n "$_configure_line" ] && [ -n "$_uv_line" ] && [ -n "$_venv_line" ] \
   && [ "$_resolve_line" -lt "$_uv_line" ] && [ "$_uv_line" -lt "$_configure_line" ] \
   && [ "$_configure_line" -lt "$_venv_line" ]; then
    ok "helper runs after uv setup and before venv setup"
else
    bad "helper ordering (resolve=$_resolve_line uv=$_uv_line configure=$_configure_line venv=$_venv_line)"
fi

for _required in \
    '_ISOLATE_UV_CACHE=false' \
    '--isolated-uv-cache) _ISOLATE_UV_CACHE=true' \
    'UNSLOTH_ISOLATE_UV_CACHE' \
    'export UNSLOTH_ISOLATE_UV_CACHE=1' \
    'unset UV_CACHE_DIR' \
    '_prepare_studio_uv_cache_for_launch'; do
    if grep -Fq -- "$_required" "$INSTALL_SH"; then
        ok "source contract: $_required"
    else
        bad "missing source contract: $_required"
    fi
done

echo ""
echo "  PASS: $PASS"
echo "  FAIL: $FAIL"
if [ "$FAIL" -gt 0 ]; then
    echo "FAILED"
    exit 1
fi
echo "ALL PASSED"