Skip to content

Liquid Glass and Apple Music touches for the Spotify iOS app. A GPL-3.0 fork of spoti.pw 0.21.1.

C
2.8 KB
Raw Blame

Speed harness

Spotify's audio chain (AudioUnitDriver2: a converter fed by a render callback, a mixer and RemoteIO, wired with MakeConnection, slices of 4096) rebuilt with real units in the simulator, with PlayerSpeedPitch.x compiled in: its AudioUnitSetProperty rebinding takes over the mixer-to-output connection exactly as on the phone (the harness is the main executable), and its SPTPlayerState hook runs on a mock state that computes -position the way Spotify's does.

THEOS=$HOME/theos ./build.sh
xcrun simctl install booted build/SpeedHarness.app
xcrun simctl launch --console-pty booted com.vojta.speedharness [rate]

The script plays a quiet sine and steps through normal, 1.5x, 1.5x at +3 semitones, 0.75x and back, logging how fast the converter's callback (the decoder) was drained and how far the state's position is from the content played. 2026-09-18: drained 1.00x, 1.50x, 1.50x, 0.75x, 1.00x; position within 12 ms.

rate sets the output's input side to 48 kHz while it runs, halfway through the 1.5x step, with no new AudioOutputUnitStart, while the mixer stays at 44.1 kHz. The mod's format listener sees the mixer and the output disagree and gives Spotify's own connection back (given Spotify's own connection back), which sets the output's input to the mixer's 44.1 kHz again; the formats agree, and the callback takes over again. 2026-10-06: drained 1.00x, 1.50x, 1.50x, 0.75x, 1.00x through the change. Before, the callback pulled the 44.1 kHz mixer for the 48 kHz output, and the drain read 1.09x.

two runs Spotify's chain twice at once, 44.1 and 48 kHz, the way Spotify runs a chain per sample rate when a local file has another rate than the stream before it. Each chain's drain is measured in seconds of its own rate for each second its output played (the simulator's output stalls now and then), and each step prints PASS or FAIL: both at 1.00x side by side; 1.5x on the chain started last only; its stop moving the 1.5x to the other and its start bringing it back; a third unit fed by a render callback of its own (voice search's kind) started without taking it; a silent decoder giving it up to the chain with sound within 1.5 s, and keeping it there when the sound comes back; a disposed mixer, then a disposed running output, with nothing else changed. 2026-10-06, iOS 27.0 simulator: all PASS. The same run on the code before this record of outputs: the 48 kHz mixer drained 1.92x with both chains started (both outputs pulled it), 2.88x at 1.5x, and the 44.1 kHz chain not at all, then silence once the 48 kHz one stopped.

xcrun simctl launch --console-pty <udid> com.vojta.speedharness two

Last it sets the sleep timer's gain (SGPlayerSetGain) to 0.25 and back to 1, and each line reads the loudest sample the speaker unit played over the step's last second, through a notify the harness adds after the mod's: 0.05 at 1, 0.0125 at 0.25.