Run a virtual iPhone on an Apple Silicon Mac.
Swift
general: Remove SSH-ramdisk CFW install path; host-mount is the sole flow
zqxwcefcc30e1657d8
diff --git a/AGENTS.md b/AGENTS.mdindex ecc3e51b..87c19404 100644--- a/AGENTS.md+++ b/AGENTS.md@@ -98,11 +98,11 @@ scripts/├── patches/ # Build-time patches (libirecovery)├── fw_prepare.sh # Download IPSWs, merge cloudOS into iPhone├── fw_manifest.py # Generate hybrid BuildManifest/Restore plists-├── ramdisk_build.py # Build SSH ramdisk with trustcache (reuses Swift patch-component for TXM/base kernel)-├── ramdisk_send.sh # Send ramdisk to device via irecovery├── cfw_install.sh # Install CFW (regular)├── cfw_install_dev.sh # Regular + rpcserver daemon├── cfw_install_jb.sh # Regular + jetsam fix + procursus+├── cfw_install_exp.sh # JB + experimental research patches (hv_vmm rename, DT identity)+├── cfw_install_host.sh # Host-mount CFW driver (attaches Disk.img, VM off; re-execs sudo)├── vm_create.sh # Create VM directory├── setup_machine.sh # Full automation (setup → first boot)├── setup_tools.sh # Install deps, build toolchain from submodules, create venv@@ -111,6 +111,9 @@ scripts/├── setup_libimobiledevice.sh # Build libimobiledevice stack from scripts/repos submodules└── tail_jb_patch_logs.sh # Tail JB patch log output+tools/+└── apfs_snap_rename.py # Offline APFS boot-snapshot flip (used by cfw_install_host.sh)+research/ # Detailed firmware/patch documentation```diff --git a/Makefile b/Makefileindex 24f535cc..195510b7 100644--- a/Makefile+++ b/Makefile@@ -17,7 +17,6 @@ BACKUP_INCLUDE_IPSW ?= 0FORCE ?= 0RESTORE_UDID ?= # UDID for restore operationsRESTORE_ECID ?= # ECID for restore operations-IRECOVERY_ECID ?= # ECID for ramdisk send operations# ─── Build info ──────────────────────────────────────────────────GIT_HASH := $(shell git rev-parse --short HEAD 2>/dev/null || echo "unknown")@@ -121,17 +120,12 @@ help:@echo " make restore Restore to device (pymobiledevice3 backend)"@echo " make restore_offline Restore offline — decrypts AEA images in place, uses cached .shsh blob"@echo ""- @echo "Ramdisk:"- @echo " make ramdisk_build Build signed SSH ramdisk"- @echo " make ramdisk_send Send ramdisk to device"- @echo ""- @echo "CFW:"- @echo " make cfw_install Install CFW mods via SSH"- @echo " make cfw_install_dev Install CFW mods via SSH (dev mode)"+ @echo "CFW (host-mount install; VM must be off, re-execs sudo):"+ @echo " make cfw_install Install base CFW mods"+ @echo " make cfw_install_dev Install CFW mods (dev mode)"@echo " make cfw_install_jb Install CFW + JB extensions (jetsam/procursus/basebin)"@echo " make cfw_install_exp Install CFW + JB + EXP experimental (hv_vmm rename, post-restore DT, build spoof)"- @echo " make cfw_install_host Ramdisk-free install: host-mount files + offline snapshot flip"- @echo " Options: VARIANT=regular|dev|jb|exp (default exp) SPOOF_BUILD=<id> (exp)"+ @echo " make cfw_install_host Select variant: VARIANT=regular|dev|jb|exp (default exp) SPOOF_BUILD=<id> (exp)"@echo ""@echo "Variables: VM_DIR=$(VM_DIR) CPU=$(CPU) MEMORY=$(MEMORY) DISK_SIZE=$(DISK_SIZE)"@@ -463,19 +457,6 @@ restore_offline:$(if $(RESTORE_UDID),--udid $(RESTORE_UDID),) \--ecid "$$ECID"-# ═══════════════════════════════════════════════════════════════════-# Ramdisk-# ═══════════════════════════════════════════════════════════════════--.PHONY: ramdisk_build ramdisk_send--ramdisk_build: patcher_build- cd $(VM_DIR) && RAMDISK_UDID="$(RAMDISK_UDID)" $(PYTHON) "$(CURDIR)/$(SCRIPTS)/ramdisk_build.py" .--ramdisk_send:- cd $(VM_DIR) && PMD3_BRIDGE="$(PMD3_BRIDGE)" PYTHON="$(PYTHON)" IRECOVERY_ECID="$(IRECOVERY_ECID)" RAMDISK_UDID="$(RAMDISK_UDID)" RESTORE_UDID="$(RESTORE_UDID)" \- zsh "$(CURDIR)/$(SCRIPTS)/ramdisk_send.sh"-# ═══════════════════════════════════════════════════════════════════# CFW# ═══════════════════════════════════════════════════════════════════@@ -483,19 +464,19 @@ ramdisk_send:.PHONY: cfw_install cfw_install_dev cfw_install_jb cfw_install_exp cfw_install_hostcfw_install:- cd $(VM_DIR) && $(if $(SSH_PORT),SSH_PORT="$(SSH_PORT)") _VPHONE_PATH="$$PATH" zsh "$(CURDIR)/$(SCRIPTS)/cfw_install.sh" .+ $(MAKE) cfw_install_host VARIANT=regularcfw_install_dev:- cd $(VM_DIR) && $(if $(SSH_PORT),SSH_PORT="$(SSH_PORT)") _VPHONE_PATH="$$PATH" zsh "$(CURDIR)/$(SCRIPTS)/cfw_install_dev.sh" .+ $(MAKE) cfw_install_host VARIANT=devcfw_install_jb:- cd $(VM_DIR) && $(if $(SSH_PORT),SSH_PORT="$(SSH_PORT)") _VPHONE_PATH="$$PATH" zsh "$(CURDIR)/$(SCRIPTS)/cfw_install_jb.sh" .+ $(MAKE) cfw_install_host VARIANT=jbcfw_install_exp:- cd $(VM_DIR) && $(if $(SSH_PORT),SSH_PORT="$(SSH_PORT)") $(if $(SPOOF_BUILD),SPOOF_BUILD="$(SPOOF_BUILD)") _VPHONE_PATH="$$PATH" zsh "$(CURDIR)/$(SCRIPTS)/cfw_install_exp.sh" .+ $(MAKE) cfw_install_host VARIANT=exp SPOOF_BUILD="$(SPOOF_BUILD)"-# Ramdisk-free CFW install: place files via host mount + flip boot snapshot-# offline. No boot_dfu/ramdisk_send/iproxy/SSH. VM must be off. Re-execs sudo.+# CFW install: place files via host mount + flip the boot snapshot offline.+# VM must be off; re-execs under sudo.# Options: VARIANT=regular|dev|jb|exp (default exp) SPOOF_BUILD=<id> (exp)cfw_install_host:$(if $(SPOOF_BUILD),SPOOF_BUILD="$(SPOOF_BUILD)") zsh "$(CURDIR)/$(SCRIPTS)/cfw_install_host.sh" --variant $(if $(VARIANT),$(VARIANT),exp) "$(VM_DIR_ABS)"diff --git a/README.md b/README.mdindex 0fa781ff..c45496f7 100644--- a/README.md+++ b/README.md@@ -115,7 +115,7 @@ git clone --recurse-submodules https://github.com/Lakr233/vphone-cli.git## Quick Start```bash-make setup_machine # full automation through "First Boot" (includes restore/ramdisk/CFW)+make setup_machine # full automation through "First Boot" (includes restore/CFW)# options: NON_INTERACTIVE=1 SUDO_PASSWORD=...# LESS=1 for patchless variant (- AMFI, SSV, Img4, TXM bypasses)# DEV=1 for dev variant (+ TXM entitlement/debug bypasses)@@ -182,29 +182,15 @@ make restore # flash firmware via pymobiledevice3 restore backe## Install Custom Firmware-Stop the DFU boot in terminal 1 (Ctrl+C), then boot into DFU again for the ramdisk:+Once the restore completes, stop the DFU boot in terminal 1 (Ctrl+C) so the VM is+fully powered off. The installer mounts the VM's `Disk.img` on the host, places+all CFW files, and flips the boot snapshot offline — no DFU, ramdisk, or SSH — so+it needs exclusive access to the disk.```bash-# terminal 1-make boot_dfu # keep running-```--```bash-# terminal 2-sudo make ramdisk_build # build signed SSH ramdisk-make ramdisk_send # send to device-```--Once the ramdisk is running (you should see `Running server` in the output), open a **third terminal** for the usbmux tunnel, then install CFW from terminal 2:--```bash-# terminal 3 — keep running-python3 -m pymobiledevice3 usbmux forward 2222 22-```--```bash-# terminal 2+# terminal 2 (re-execs under sudo automatically)make cfw_install+# or: make cfw_install_dev # development variant# or: make cfw_install_jb # jailbreak variant# or: make cfw_install_exp # experimental variant (JB + research stack)# or: SPOOF_BUILD=23F77 make cfw_install_exp # additionally rewrite ProductBuildVersion@@ -212,7 +198,7 @@ make cfw_install## First Boot-Stop the DFU boot in terminal 1 (Ctrl+C), then:+With the DFU boot stopped and CFW installed, boot the VM normally:```bashmake bootdiff --git a/docs/README_ja.md b/docs/README_ja.mdindex 91c64bbc..efa5ca5a 100644--- a/docs/README_ja.md+++ b/docs/README_ja.md@@ -103,7 +103,7 @@ git clone --recurse-submodules https://github.com/Lakr233/vphone-cli.git## クイックスタート```bash-make setup_machine # 初回起動までを完全自動化(復元/ラムディスク/CFWを含む)+make setup_machine # 初回起動までを完全自動化(復元/CFWを含む)# オプション:NON_INTERACTIVE=1 SUDO_PASSWORD=...# LESS=1 で patchless バリアント(- AMFI, SSV, Img4, TXM バイパス)# DEV=1 で開発バリアント(+ TXM entitlement/デバッグバイパス)@@ -170,29 +170,12 @@ make restore # pymobiledevice3 restore バックエンドでフ## カスタムファームウェアのインストール-ターミナル 1 の DFU 起動を停止し(Ctrl+C)、Ramdisk 用に再び DFU で起動します:+復元が完了したら、ターミナル 1 の DFU 起動を停止(Ctrl+C)して VM を完全に電源オフにします。インストーラは VM の `Disk.img` をホスト側でマウントし、すべての CFW ファイルを配置してブートスナップショットをオフラインで切り替えます(DFU / Ramdisk / SSH は不要)。そのためディスクへの排他アクセスが必要です。```bash-# ターミナル 1-make boot_dfu # 実行したままにする-```--```bash-# ターミナル 2-sudo make ramdisk_build # 署名済みSSH Ramdisk のビルド-make ramdisk_send # デバイスへ送信-```--Ramdisk が起動したら(出力に `Running server` と表示されるはずです)、usbmux トンネル用に **3つ目のターミナル** を開き、ターミナル 2 から CFW をインストールします:--```bash-# ターミナル 3 — 実行したままにする-python3 -m pymobiledevice3 usbmux forward 2222 22-```--```bash-# ターミナル 2+# ターミナル 2(自動的に sudo で再実行されます)make cfw_install+# または: make cfw_install_dev # 開発バリアント# または: make cfw_install_jb # 脱獄バリアント# または: make cfw_install_exp # 実験バリアント(脱獄 + リサーチパッチスタック)# または: SPOOF_BUILD=23F77 make cfw_install_exp # ProductBuildVersion も書き換え@@ -200,7 +183,7 @@ make cfw_install## 初回起動-ターミナル 1 の DFU 起動を停止し(Ctrl+C)、以下を実行します:+DFU 起動を停止し CFW をインストールしたら、VM を通常起動します:```bashmake bootdiff --git a/docs/README_ko.md b/docs/README_ko.mdindex b48699cc..74d8853c 100644--- a/docs/README_ko.md+++ b/docs/README_ko.md@@ -103,7 +103,7 @@ git clone --recurse-submodules https://github.com/Lakr233/vphone-cli.git## 빠른 시작```bash-make setup_machine # "First Boot"까지의 전체 과정 자동화 (복원/Ramdisk/커스텀 펌웨어 포함)+make setup_machine # "First Boot"까지의 전체 과정 자동화 (복원/커스텀 펌웨어 포함)# 옵션: NON_INTERACTIVE=1 SUDO_PASSWORD=...# LESS=1 Patchless 변형 (- AMFI, SSV, Img4, TXM 우회)# DEV=1 개발 변형 (+ TXM 권한/디버그 우회)@@ -170,29 +170,12 @@ make restore # pymobiledevice3 restore 백엔드로 펌웨어## 커스텀 펌웨어 설치-터미널 1의 DFU 부팅을 중단(Ctrl+C)한 다음, 램디스크를 위해 다시 DFU로 부팅합니다:+복원이 완료되면 터미널 1의 DFU 부팅을 중단(Ctrl+C)하여 VM을 완전히 종료합니다. 설치 프로그램은 VM의 `Disk.img`를 호스트에 마운트하여 모든 CFW 파일을 배치하고 부팅 스냅샷을 오프라인으로 전환합니다(DFU / 램디스크 / SSH 불필요). 따라서 디스크에 대한 독점 액세스가 필요합니다.```bash-# 터미널 1-make boot_dfu # 계속 실행 유지-```--```bash-# 터미널 2-sudo make ramdisk_build # 서명된 SSH 램디스크 빌드-make ramdisk_send # 장치로 전송-```--램디스크가 실행되면(출력에 `Running server`가 표시됨), **세 번째 터미널**을 열어 usbmux 터널을 시작한 후, 터미널 2에서 커스텀 펌웨어를 설치합니다:--```bash-# 터미널 3 — 계속 실행 유지-python3 -m pymobiledevice3 usbmux forward 2222 22-```--```bash-# 터미널 2+# 터미널 2 (자동으로 sudo로 재실행됨)make cfw_install+# 또는: make cfw_install_dev # 개발 변형# 또는: make cfw_install_jb # 탈옥 변형# 또는: make cfw_install_exp # 실험 변형 (탈옥 + 연구 패치 스택)# 또는: SPOOF_BUILD=23F77 make cfw_install_exp # 추가로 ProductBuildVersion 재작성@@ -200,7 +183,7 @@ make cfw_install## 첫 부팅-터미널 1의 DFU 부팅을 중단(Ctrl+C)한 후 다음을 실행합니다:+DFU 부팅을 중단하고 CFW를 설치한 후, VM을 정상 부팅합니다:```bashmake bootdiff --git a/docs/README_zh.md b/docs/README_zh.mdindex c8634978..2d6d4658 100644--- a/docs/README_zh.md+++ b/docs/README_zh.md@@ -103,7 +103,7 @@ git clone --recurse-submodules https://github.com/Lakr233/vphone-cli.git## 快速开始```bash-make setup_machine # 完全自动化完成"首次启动"流程(包含 restore/ramdisk/CFW)+make setup_machine # 完全自动化完成"首次启动"流程(包含 restore/CFW)# 选项:NON_INTERACTIVE=1 SUDO_PASSWORD=...# LESS=1 patchless 变体(- AMFI、SSV、Img4、TXM 绕过)# DEV=1 开发变体(+ TXM 权限/调试绕过)@@ -170,29 +170,12 @@ make restore # 通过 pymobiledevice3 restore 后端刷写固## 安装自定义固件-在终端 1 中停止 DFU 引导(Ctrl+C),然后再次进入 DFU,用于 ramdisk:+恢复完成后,在终端 1 中停止 DFU 引导(Ctrl+C),使 VM 完全关机。安装程序会在主机上挂载 VM 的 `Disk.img`,放置所有 CFW 文件,并离线切换启动快照(无需 DFU / ramdisk / SSH),因此需要对磁盘的独占访问。```bash-# 终端 1-make boot_dfu # 保持运行-```--```bash-# 终端 2-sudo make ramdisk_build # 构建签名的 SSH ramdisk-make ramdisk_send # 发送到设备-```--当 ramdisk 运行后(输出中应显示 `Running server`),打开**第三个终端**运行 usbmux 隧道,然后在终端 2 安装 CFW:--```bash-# 终端 3 —— 保持运行-python3 -m pymobiledevice3 usbmux forward 2222 22-```--```bash-# 终端 2+# 终端 2(会自动通过 sudo 重新执行)make cfw_install+# 或:make cfw_install_dev # 开发变体# 或:make cfw_install_jb # 越狱变体# 或:make cfw_install_exp # 实验变体(越狱 + 研究补丁栈)# 或:SPOOF_BUILD=23F77 make cfw_install_exp # 同时改写 ProductBuildVersion@@ -200,7 +183,7 @@ make cfw_install## 首次启动-在终端 1 中停止 DFU 引导(Ctrl+C),然后:+停止 DFU 引导并完成 CFW 安装后,正常启动 VM:```bashmake bootdiff --git a/scripts/cfw_host_mode.sh b/scripts/cfw_host_mode.shdeleted file mode 100644index 61838474..00000000--- a/scripts/cfw_host_mode.sh+++ /dev/null@@ -1,52 +0,0 @@-# cfw_host_mode.sh — sourced by cfw_install*.sh when CFW_HOST_MODE=1.-#-# Replaces the SSH-to-ramdisk transport with local operations on the image-# volumes mounted on the host (by the host driver). The rest of each-# installer's logic (cfw.py patching, ldid signing, ipsw/aea cryptex decrypt,-# hdiutil DMG mounts, xcrun builds, DSC/DT patchers) is already host-side and-# runs unchanged. Must run as root. The boot-source flip the ramdisk did with-# `snaputil` is done separately, offline, by tools/apfs_snap_rename.py.-#-# The host root (/) is read-only (SSV), so device paths /mnt1,/mnt3,/mnt5 are-# remapped onto a writable scratch base (CFW_HOST_MNT). Only those exact-# device tokens are remapped, so host source paths (e.g. .../mnt_sysos) are-# left untouched.-: "${CFW_HOST_CONTAINER:?CFW_HOST_MODE=1 but CFW_HOST_CONTAINER (host apfs container disk, e.g. disk20) unset}"-CFW_HOST_MNT="${CFW_HOST_MNT:-/private/tmp/cfwhost}"-/bin/mkdir -p "$CFW_HOST_MNT"-_HOST_TAR="$(command -v gtar 2>/dev/null || echo /opt/homebrew/bin/gtar)"--_map() { # remap device /mntN tokens -> $CFW_HOST_MNT/mntN- local s="$1"- s="${s//\/mnt1/$CFW_HOST_MNT/mnt1}"- s="${s//\/mnt2/$CFW_HOST_MNT/mnt2}"- s="${s//\/mnt3/$CFW_HOST_MNT/mnt3}"- s="${s//\/mnt5/$CFW_HOST_MNT/mnt5}"- printf '%s' "$s"-}--ssh_cmd() {- local c="$*"- case "$c" in- *snaputil*) return 0 ;; # flip done offline- *dropbearkey*) return 0 ;; # host keys made at first boot- *dropbear_rsa_host_key*|*dropbear_ecdsa_host_key*) return 0 ;; # skip chmod of keys not created- */sbin/halt*) return 0 ;; # no VM to halt- esac- c="${c//\/usr\/bin\/tar/$_HOST_TAR}" # macOS bsdtar lacks GNU flags- /bin/sh -c "$(_map "$c")"-}-scp_to() { /bin/cp -R "$(_map "$1")" "$(_map "$2")"; }-scp_from() { /bin/cp "$(_map "$1")" "$(_map "$2")"; }-remote_file_exists() { [[ -e "$(_map "$1")" ]]; }-remote_mount() {- local dev="$1" mnt opts="${3:-rw}"- mnt="$(_map "$2")"- local slice="${dev##*disk1}" # /dev/disk1sN -> sN- local hostdev="/dev/${CFW_HOST_CONTAINER}${slice}"- /bin/mkdir -p "$mnt"- /sbin/mount | /usr/bin/grep -q " on $mnt " && return 0- /sbin/mount_apfs -o "$opts" "$hostdev" "$mnt" 2>/dev/null || true- /sbin/mount | /usr/bin/grep -q " on $mnt " || die "host mount failed: $hostdev -> $mnt"-}-wait_for_device_ssh_ready() { :; }diff --git a/scripts/cfw_install.sh b/scripts/cfw_install.shindex 7b967224..6dfcb97e 100755--- a/scripts/cfw_install.sh+++ b/scripts/cfw_install.sh@@ -1,14 +1,17 @@#!/bin/zsh-# cfw_install.sh — Install base CFW modifications on vphone via SSH ramdisk.+# cfw_install.sh — Install base CFW modifications on vphone.## Installs Cryptexes, patches system binaries, installs jailbreak tools# and configures LaunchDaemons for persistent SSH/VNC access.#+# Files are placed directly on the VM's Disk.img volumes, which cfw_install_host.sh+# attaches and mounts on the host; the VM must be off.+## Safe to run multiple times — always patches from original .bak files,# keeps decrypted Cryptex DMGs cached, handles already-mounted filesystems.## Prerequisites:-# - Device booted into SSH ramdisk (make ramdisk_send)+# - VM restored (make restore) and powered off# - `ipsw` tool installed (brew install blacktop/tap/ipsw)# - `aea` tool available (macOS 12+)# - Python: make setup_venv && source .venv/bin/activate@@ -22,7 +25,6 @@ set -euo pipefailVM_DIR="${1:-.}"SCRIPT_DIR="${0:a:h}"-CFW_SKIP_HALT="${CFW_SKIP_HALT:-0}"# Resolve absolute pathsVM_DIR="$(cd "$VM_DIR" && pwd)"@@ -48,22 +50,6 @@ CFW_INPUT="cfw_input"CFW_ARCHIVE="cfw_input.tar.zst"TEMP_DIR="$VM_DIR/.cfw_temp"-SSH_PORT="${SSH_PORT:-2222}"-SSH_PASS="alpine"-SSH_USER="root"-SSH_HOST="localhost"-SSH_RETRY="${SSH_RETRY:-3}"-CFW_SSH_READY_TIMEOUT="${CFW_SSH_READY_TIMEOUT:-60}"-CFW_SSH_READY_INTERVAL="${CFW_SSH_READY_INTERVAL:-2}"-SSHPASS_BIN=""-SSH_OPTS=(- -o StrictHostKeyChecking=no- -o UserKnownHostsFile=/dev/null- -o PreferredAuthentications=password- -o ConnectTimeout=30- -q-)-# ── Helpers ─────────────────────────────────────────────────────die() {echo "[-] $*" >&2@@ -72,75 +58,10 @@ die() {check_prerequisites() {local missing=()- command -v sshpass &>/dev/null || missing+=("sshpass")command -v ldid &>/dev/null || missing+=("ldid (brew install ldid-procursus)")if ((${#missing[@]} > 0)); thendie "Missing required tools: ${missing[*]}. Run: make setup_tools"fi- SSHPASS_BIN="$(command -v sshpass)"-}--wait_for_device_ssh_ready() {- local timeout interval elapsed- timeout="$CFW_SSH_READY_TIMEOUT"- interval="$CFW_SSH_READY_INTERVAL"- elapsed=0-- [[ "$timeout" == <-> ]] || die "CFW_SSH_READY_TIMEOUT must be an integer (seconds)"- [[ "$interval" == <-> ]] || die "CFW_SSH_READY_INTERVAL must be an integer (seconds)"- (( timeout > 0 )) || die "CFW_SSH_READY_TIMEOUT must be > 0"- (( interval > 0 )) || die "CFW_SSH_READY_INTERVAL must be > 0"-- echo "[*] Waiting for ramdisk SSH on ${SSH_USER}@${SSH_HOST}:${SSH_PORT} (timeout=${timeout}s)..."- while (( elapsed < timeout )); do- if "$SSHPASS_BIN" -p "$SSH_PASS" ssh \- -o StrictHostKeyChecking=no \- -o UserKnownHostsFile=/dev/null \- -o PreferredAuthentications=password \- -o ConnectTimeout=5 \- -q \- -p "$SSH_PORT" \- "$SSH_USER@$SSH_HOST" "echo ready" >/dev/null 2>&1- then- echo "[+] Ramdisk SSH is reachable"- return- fi- sleep "$interval"- (( elapsed += interval ))- done-- die "Ramdisk SSH is not reachable on ${SSH_HOST}:${SSH_PORT}. Make sure ramdisk is running (make ramdisk_send) and iproxy is forwarding ${SSH_PORT}->22."-}--_sshpass() {- "$SSHPASS_BIN" -p "$SSH_PASS" "$@"-}--_ssh_retry() {- local attempt rc label- label=${2:-cmd}- for ((attempt = 1; attempt <= SSH_RETRY; attempt++)); do- "$@" && return 0- rc=$?- [[ $rc -ne 255 ]] && return $rc # real command failure — don't retry- echo " [${label}] connection lost (attempt $attempt/$SSH_RETRY), retrying in 3s..." >&2- sleep 3- done- return 255-}--ssh_cmd() {- _ssh_retry _sshpass ssh "${SSH_OPTS[@]}" -p "$SSH_PORT" "$SSH_USER@$SSH_HOST" "$@"-}-scp_to() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" -r "$1" "$SSH_USER@$SSH_HOST:$2"-}-scp_from() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" "$SSH_USER@$SSH_HOST:$1" "$2"-}--remote_file_exists() {- ssh_cmd "test -f '$1'" 2>/dev/null}ldid_sign() {@@ -187,19 +108,6 @@ assert_mount_under_vm() {esac}-# Mount device filesystem, tolerate already-mounted-remote_mount() {- local dev="$1" mnt="$2" opts="${3:-rw}"- ssh_cmd "/bin/mkdir -p $mnt"- if ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- return 0- fi- ssh_cmd "/sbin/mount_apfs -o $opts $dev $mnt 2>/dev/null || true"- if ! ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- die "Failed to mount $dev at $mnt (opts=$opts). Make sure the ramdisk was booted with the expected patched kernel."- fi-}-# ── Find restore directory ─────────────────────────────────────find_restore_dir() {for dir in "$VM_DIR"/iPhone*_Restore; do@@ -242,9 +150,24 @@ cleanup_on_exit() {}trap cleanup_on_exit EXIT-# Host-mode transport override (CFW_HOST_MODE=1): run install against image-# volumes mounted locally on the host instead of a device over SSH.-[[ -n "${CFW_HOST_MODE:-}" ]] && source "$SCRIPT_DIR/cfw_host_mode.sh"+# The VM's Disk.img is attached on the host by cfw_install_host.sh; its APFS+# volumes are mounted here and every file is placed with plain cp/chmod/etc.+# (the VM is off — nothing runs "on the device").+: "${CFW_HOST_CONTAINER:?CFW_HOST_CONTAINER unset — run via cfw_install_host.sh}"+HOST_MNT="${CFW_HOST_MNT:-/private/tmp/cfwhost}"+MNT1="$HOST_MNT/mnt1" # disk1s1 (System / rootfs)+MNT3="$HOST_MNT/mnt3" # disk1s3+TAR="$(command -v gtar 2>/dev/null || echo /opt/homebrew/bin/gtar)" # macOS bsdtar lacks GNU tar flags+mkdir -p "$HOST_MNT"++# Mount an APFS volume of the attached image container at a host mount point.+mount_vol() { # mount_vol <slice, e.g. s1> <mountpoint> [opts]+ local dev="/dev/${CFW_HOST_CONTAINER}$1" mnt="$2" opts="${3:-rw}"+ /bin/mkdir -p "$mnt"+ /sbin/mount | /usr/bin/grep -q " on $mnt " && return 0+ /sbin/mount_apfs -o "$opts" "$dev" "$mnt" 2>/dev/null || true+ /sbin/mount | /usr/bin/grep -q " on $mnt " || die "mount failed: $dev -> $mnt"+}# ════════════════════════════════════════════════════════════════# Main@@ -260,7 +183,6 @@ setup_cfw_inputINPUT_DIR="$VM_DIR/$CFW_INPUT"echo "[+] Input resources: $INPUT_DIR"check_prerequisites-wait_for_device_ssh_readymkdir -p "$TEMP_DIR"@@ -277,45 +199,26 @@ echo " AppOS: $CRYPTEX_APPOS"echo ""echo "[1/7] Installing Cryptex (SystemOS + AppOS)..."-# Mount device rootfs first to check existing state+# Mount the image's System volume first to check existing stateecho " Mounting rootfs rw..."-remote_mount /dev/disk1s1 /mnt1--# Rename APFS update snapshot to orig-fs (idempotent)-echo " Checking APFS snapshots..."-SNAP_LIST=$(ssh_cmd "snaputil -l /mnt1 2>/dev/null" || true)-if echo "$SNAP_LIST" | grep -q "^orig-fs$"; then- echo " Snapshot 'orig-fs' already exists, skipping rename"-else- UPDATE_SNAP=$(echo "$SNAP_LIST" | awk '/^com\.apple\.os\.update-/{print; exit}')- if [[ -n "$UPDATE_SNAP" ]]; then- echo " Renaming snapshot: $UPDATE_SNAP -> orig-fs"- ssh_cmd "snaputil -n '$UPDATE_SNAP' orig-fs /mnt1"- # Verify rename succeeded- if ! ssh_cmd "snaputil -l /mnt1 2>/dev/null" | grep -q "^orig-fs$"; then- die "Failed to rename snapshot to orig-fs"- fi- echo " Snapshot renamed, remounting..."- ssh_cmd "/sbin/umount /mnt1"- remote_mount /dev/disk1s1 /mnt1- echo " [+] Snapshot renamed to orig-fs"- else- echo " No com.apple.os.update- snapshot found, skipping"- fi-fi+mount_vol s1 "$MNT1"-# Check if Cryptexes already exist on device (skip the slow copy if so)-CRYPTEX_OS_COUNT=$(ssh_cmd "/bin/ls /mnt1/System/Cryptexes/OS/ 2>/dev/null | /usr/bin/wc -l" | tr -d ' ')-CRYPTEX_APP_COUNT=$(ssh_cmd "/bin/ls /mnt1/System/Cryptexes/App/ 2>/dev/null | /usr/bin/wc -l" | tr -d ' ')+# Check if Cryptexes already exist on the volume (skip the slow copy if so).+# ls only runs when the dir exists, so its failure can't trip set -e/pipefail+# (on a fresh install these dirs don't exist yet → counts stay 0).+CRYPTEX_OS_COUNT=0+CRYPTEX_APP_COUNT=0+[[ -d "$MNT1/System/Cryptexes/OS" ]] && CRYPTEX_OS_COUNT=$(/bin/ls "$MNT1/System/Cryptexes/OS/" | /usr/bin/wc -l | tr -d ' ')+[[ -d "$MNT1/System/Cryptexes/App" ]] && CRYPTEX_APP_COUNT=$(/bin/ls "$MNT1/System/Cryptexes/App/" | /usr/bin/wc -l | tr -d ' ')if [[ "${CRYPTEX_OS_COUNT:-0}" -gt 0 && "${CRYPTEX_APP_COUNT:-0}" -gt 0 ]]; thenecho " [*] Cryptexes already installed (OS=${CRYPTEX_OS_COUNT} entries, App=${CRYPTEX_APP_COUNT} entries), skipping"# Still ensure dyld symlinks exist- ssh_cmd "/bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \- /mnt1/System/Library/Caches/com.apple.dyld"- ssh_cmd "/bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \- /mnt1/System/DriverKit/System/Library/dyld"+ /bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \+ $MNT1/System/Library/Caches/com.apple.dyld+ /bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \+ $MNT1/System/DriverKit/System/Library/dyldecho " [+] Cryptex skipped (already present)"else@@ -356,21 +259,21 @@ elsehost_hdiutil attach -mountpoint "$MNT_APPOS" "$APPOS_DMG" -nobrowse -owners off \|| die "Failed to mount AppOS DMG. Run 'sudo -v' in a terminal and retry if hdiutil needs administrator privileges."- ssh_cmd "/bin/rm -rf /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"- ssh_cmd "/bin/mkdir -p /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"- ssh_cmd "/bin/chmod 0755 /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"+ /bin/rm -rf $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS+ /bin/mkdir -p $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS+ /bin/chmod 0755 $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS- # Copy Cryptex files to device+ # Copy Cryptex files onto the volumeecho " Copying Cryptexes..."- scp_to "$MNT_SYSOS/." "/mnt1/System/Cryptexes/OS"- scp_to "$MNT_APPOS/." "/mnt1/System/Cryptexes/App"+ cp -R "$MNT_SYSOS/." "$MNT1/System/Cryptexes/OS"+ cp -R "$MNT_APPOS/." "$MNT1/System/Cryptexes/App"# Create dyld symlinks (ln -sf is idempotent)echo " Creating dyld symlinks..."- ssh_cmd "/bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \- /mnt1/System/Library/Caches/com.apple.dyld"- ssh_cmd "/bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \- /mnt1/System/DriverKit/System/Library/dyld"+ /bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \+ $MNT1/System/Library/Caches/com.apple.dyld+ /bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \+ $MNT1/System/DriverKit/System/Library/dyld# Unmount Cryptex DMGsecho " Unmounting Cryptex DMGs..."@@ -385,21 +288,21 @@ echo ""echo "[2/7] Patching seputil..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/seputil.bak"; then+if ! [[ -e "$MNT1/usr/libexec/seputil.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/seputil /mnt1/usr/libexec/seputil.bak"+ /bin/cp $MNT1/usr/libexec/seputil $MNT1/usr/libexec/seputil.bakfi-scp_from "/mnt1/usr/libexec/seputil.bak" "$TEMP_DIR/seputil"+cp "$MNT1/usr/libexec/seputil.bak" "$TEMP_DIR/seputil""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-seputil "$TEMP_DIR/seputil"ldid_sign "$TEMP_DIR/seputil" "com.apple.seputil"-scp_to "$TEMP_DIR/seputil" "/mnt1/usr/libexec/seputil"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/seputil"+cp -R "$TEMP_DIR/seputil" "$MNT1/usr/libexec/seputil"+/bin/chmod 0755 $MNT1/usr/libexec/seputil# Rename gigalocker (mv to same name is fine on re-run)echo " Renaming gigalocker..."-remote_mount /dev/disk1s3 /mnt3-ssh_cmd '/bin/mv /mnt3/*.gl /mnt3/AA.gl 2>/dev/null || true'+mount_vol s3 "$MNT3"+mv "$MNT3"/*.gl(N) "$MNT3/AA.gl" 2>/dev/null || trueecho " [+] seputil patched"@@ -407,21 +310,21 @@ echo " [+] seputil patched"echo ""echo "[3/7] Installing AppleParavirtGPUMetalIOGPUFamily..."-scp_to "$INPUT_DIR/custom/AppleParavirtGPUMetalIOGPUFamily.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/AppleParavirtGPUMetalIOGPUFamily.tar -C /mnt1"+cp -R "$INPUT_DIR/custom/AppleParavirtGPUMetalIOGPUFamily.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/AppleParavirtGPUMetalIOGPUFamily.tar -C $MNT1-BUNDLE="/mnt1/System/Library/Extensions/AppleParavirtGPUMetalIOGPUFamily.bundle"+BUNDLE="$MNT1/System/Library/Extensions/AppleParavirtGPUMetalIOGPUFamily.bundle"# Clean macOS resource fork files (._* files from tar xattrs)-ssh_cmd "find $BUNDLE -name '._*' -delete 2>/dev/null || true"-ssh_cmd "/usr/sbin/chown -R 0:0 $BUNDLE"-ssh_cmd "/bin/chmod 0755 $BUNDLE"-ssh_cmd "/bin/chmod 0755 $BUNDLE/libAppleParavirtCompilerPluginIOGPUFamily.dylib"-ssh_cmd "/bin/chmod 0755 $BUNDLE/AppleParavirtGPUMetalIOGPUFamily"-ssh_cmd "/bin/chmod 0755 $BUNDLE/_CodeSignature"-ssh_cmd "/bin/chmod 0644 $BUNDLE/_CodeSignature/CodeResources"-ssh_cmd "/bin/chmod 0644 $BUNDLE/Info.plist"-ssh_cmd "/bin/rm -f /mnt1/AppleParavirtGPUMetalIOGPUFamily.tar"+find $BUNDLE -name '._*' -delete 2>/dev/null || true+/usr/sbin/chown -R 0:0 $BUNDLE+/bin/chmod 0755 $BUNDLE+/bin/chmod 0755 $BUNDLE/libAppleParavirtCompilerPluginIOGPUFamily.dylib+/bin/chmod 0755 $BUNDLE/AppleParavirtGPUMetalIOGPUFamily+/bin/chmod 0755 $BUNDLE/_CodeSignature+/bin/chmod 0644 $BUNDLE/_CodeSignature/CodeResources+/bin/chmod 0644 $BUNDLE/Info.plist+/bin/rm -f $MNT1/AppleParavirtGPUMetalIOGPUFamily.tarecho " [+] GPU driver installed"@@ -429,16 +332,14 @@ echo " [+] GPU driver installed"echo ""echo "[4/7] Installing iosbinpack64..."-scp_to "$INPUT_DIR/jb/iosbinpack64.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/iosbinpack64.tar -C /mnt1"-ssh_cmd "/bin/rm -f /mnt1/iosbinpack64.tar"+cp -R "$INPUT_DIR/jb/iosbinpack64.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/iosbinpack64.tar -C $MNT1+/bin/rm -f $MNT1/iosbinpack64.tar-echo " Setting up dropbear host keys..."-ssh_cmd "/bin/mkdir -p /mnt3/dropbear"-ssh_cmd "if [ ! -f /mnt3/dropbear/dropbear_rsa_host_key ]; then /usr/local/bin/dropbearkey -t rsa -f /mnt3/dropbear/dropbear_rsa_host_key >/dev/null; fi"-ssh_cmd "if [ ! -f /mnt3/dropbear/dropbear_ecdsa_host_key ]; then /usr/local/bin/dropbearkey -t ecdsa -f /mnt3/dropbear/dropbear_ecdsa_host_key >/dev/null; fi"-ssh_cmd "/bin/chmod 600 /mnt3/dropbear/dropbear_rsa_host_key /mnt3/dropbear/dropbear_ecdsa_host_key"+# dropbear host keys are generated on first boot by dropbear -R; just ensure+# the key directory exists for it to write into.+/bin/mkdir -p $MNT3/dropbearecho " [+] iosbinpack64 installed"@@ -447,16 +348,16 @@ echo ""echo "[5/7] Patching launchd_cache_loader..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/launchd_cache_loader.bak"; then+if ! [[ -e "$MNT1/usr/libexec/launchd_cache_loader.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/launchd_cache_loader /mnt1/usr/libexec/launchd_cache_loader.bak"+ /bin/cp $MNT1/usr/libexec/launchd_cache_loader $MNT1/usr/libexec/launchd_cache_loader.bakfi-scp_from "/mnt1/usr/libexec/launchd_cache_loader.bak" "$TEMP_DIR/launchd_cache_loader"+cp "$MNT1/usr/libexec/launchd_cache_loader.bak" "$TEMP_DIR/launchd_cache_loader""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-launchd-cache-loader "$TEMP_DIR/launchd_cache_loader"ldid_sign "$TEMP_DIR/launchd_cache_loader" "com.apple.launchd_cache_loader"-scp_to "$TEMP_DIR/launchd_cache_loader" "/mnt1/usr/libexec/launchd_cache_loader"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/launchd_cache_loader"+cp -R "$TEMP_DIR/launchd_cache_loader" "$MNT1/usr/libexec/launchd_cache_loader"+/bin/chmod 0755 $MNT1/usr/libexec/launchd_cache_loaderecho " [+] launchd_cache_loader patched"@@ -465,16 +366,16 @@ echo ""echo "[6/7] Patching mobileactivationd..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/mobileactivationd.bak"; then+if ! [[ -e "$MNT1/usr/libexec/mobileactivationd.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/mobileactivationd /mnt1/usr/libexec/mobileactivationd.bak"+ /bin/cp $MNT1/usr/libexec/mobileactivationd $MNT1/usr/libexec/mobileactivationd.bakfi-scp_from "/mnt1/usr/libexec/mobileactivationd.bak" "$TEMP_DIR/mobileactivationd"+cp "$MNT1/usr/libexec/mobileactivationd.bak" "$TEMP_DIR/mobileactivationd""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-mobileactivationd "$TEMP_DIR/mobileactivationd"ldid_sign "$TEMP_DIR/mobileactivationd"-scp_to "$TEMP_DIR/mobileactivationd" "/mnt1/usr/libexec/mobileactivationd"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/mobileactivationd"+cp -R "$TEMP_DIR/mobileactivationd" "$MNT1/usr/libexec/mobileactivationd"+/bin/chmod 0755 $MNT1/usr/libexec/mobileactivationdecho " [+] mobileactivationd patched"@@ -514,8 +415,8 @@ ldid \-S"$VPHONED_SRC/entitlements.plist" \-M "-K$VM_DIR/$CFW_INPUT/signcert.p12" \"$TEMP_DIR/vphoned"-scp_to "$TEMP_DIR/vphoned" "/mnt1/usr/bin/vphoned"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/bin/vphoned"+cp -R "$TEMP_DIR/vphoned" "$MNT1/usr/bin/vphoned"+/bin/chmod 0755 $MNT1/usr/bin/vphoned# Keep a copy of the signed binary for host-side auto-updatecp "$TEMP_DIR/vphoned" "$VM_DIR/.vphoned.signed"echo " [+] vphoned installed (signed copy at .vphoned.signed)"@@ -528,32 +429,32 @@ for plist in bash.plist dropbear.plist trollvnc.plist rpcserver_ios.plist; docp "$INPUT_DIR/jb/LaunchDaemons/dropbear.plist" "$plist_src""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-dropbear-plist "$plist_src"fi- scp_to "$plist_src" "/mnt1/System/Library/LaunchDaemons/"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/$plist"+ cp -R "$plist_src" "$MNT1/System/Library/LaunchDaemons/"+ /bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/$plistdone-scp_to "$VPHONED_SRC/vphoned.plist" "/mnt1/System/Library/LaunchDaemons/"-ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/vphoned.plist"+cp -R "$VPHONED_SRC/vphoned.plist" "$MNT1/System/Library/LaunchDaemons/"+/bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/vphoned.plist# Always patch launchd.plist from .bak (original)echo " Patching launchd.plist..."-if ! remote_file_exists "/mnt1/System/Library/xpc/launchd.plist.bak"; then+if ! [[ -e "$MNT1/System/Library/xpc/launchd.plist.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/System/Library/xpc/launchd.plist /mnt1/System/Library/xpc/launchd.plist.bak"+ /bin/cp $MNT1/System/Library/xpc/launchd.plist $MNT1/System/Library/xpc/launchd.plist.bakfi-scp_from "/mnt1/System/Library/xpc/launchd.plist.bak" "$TEMP_DIR/launchd.plist"+cp "$MNT1/System/Library/xpc/launchd.plist.bak" "$TEMP_DIR/launchd.plist"cp "$VPHONED_SRC/vphoned.plist" "$INPUT_DIR/jb/LaunchDaemons/""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" inject-daemons "$TEMP_DIR/launchd.plist" "$INPUT_DIR/jb/LaunchDaemons"-scp_to "$TEMP_DIR/launchd.plist" "/mnt1/System/Library/xpc/launchd.plist"-ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/xpc/launchd.plist"+cp -R "$TEMP_DIR/launchd.plist" "$MNT1/System/Library/xpc/launchd.plist"+/bin/chmod 0644 $MNT1/System/Library/xpc/launchd.plistecho " [+] LaunchDaemons installed"# ═══════════ CLEANUP ═════════════════════════════════════════echo ""-echo "[*] Unmounting device filesystems..."-ssh_cmd "/sbin/umount /mnt1 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt3 2>/dev/null || true"+echo "[*] Unmounting image volumes..."+/sbin/umount $MNT1 2>/dev/null || true+/sbin/umount $MNT3 2>/dev/null || true# Keep .cfw_temp/Cryptex*.dmg cached (slow to re-create)# Only remove temp binaries@@ -566,11 +467,5 @@ rm -f "$TEMP_DIR/seputil" \echo ""echo "[+] CFW installation complete!"-echo " Reboot to apply changes."+echo " Boot to apply changes."echo " After boot, SSH will be available on port 22222 (password: alpine)"--if [[ "$CFW_SKIP_HALT" == "1" ]]; then- echo "[*] CFW_SKIP_HALT=1, skipping halt."-else- ssh_cmd "/sbin/halt" || true-fidiff --git a/scripts/cfw_install_dev.sh b/scripts/cfw_install_dev.shindex 76fdb500..498139b8 100755--- a/scripts/cfw_install_dev.sh+++ b/scripts/cfw_install_dev.sh@@ -1,14 +1,17 @@#!/bin/zsh-# cfw_install.sh — Install base CFW modifications on vphone via SSH ramdisk.+# cfw_install_dev.sh — Install base CFW modifications on vphone (dev variant).## Installs Cryptexes, patches system binaries, installs jailbreak tools# and configures LaunchDaemons for persistent SSH/VNC access.#+# Files are placed directly on the VM's Disk.img volumes, which cfw_install_host.sh+# attaches and mounts on the host; the VM must be off.+## Safe to run multiple times — always patches from original .bak files,# keeps decrypted Cryptex DMGs cached, handles already-mounted filesystems.## Prerequisites:-# - Device booted into SSH ramdisk (make ramdisk_send)+# - VM restored (make restore) and powered off# - `ipsw` tool installed (brew install blacktop/tap/ipsw)# - `aea` tool available (macOS 12+)# - Python: make setup_venv && source .venv/bin/activate@@ -22,7 +25,6 @@ set -euo pipefailVM_DIR="${1:-.}"SCRIPT_DIR="${0:a:h}"-CFW_SKIP_HALT="${CFW_SKIP_HALT:-0}"# Resolve absolute pathsVM_DIR="$(cd "$VM_DIR" && pwd)"@@ -43,20 +45,6 @@ CFW_INPUT="cfw_input"CFW_ARCHIVE="cfw_input.tar.zst"TEMP_DIR="$VM_DIR/.cfw_temp"-SSH_PORT="${SSH_PORT:-2222}"-SSH_PASS="alpine"-SSH_USER="root"-SSH_HOST="localhost"-SSH_RETRY="${SSH_RETRY:-3}"-SSHPASS_BIN=""-SSH_OPTS=(- -o StrictHostKeyChecking=no- -o UserKnownHostsFile=/dev/null- -o PreferredAuthentications=password- -o ConnectTimeout=30- -q-)-# ── Helpers ─────────────────────────────────────────────────────die() {echo "[-] $*" >&2@@ -65,43 +53,10 @@ die() {check_prerequisites() {local missing=()- command -v sshpass &>/dev/null || missing+=("sshpass")command -v ldid &>/dev/null || missing+=("ldid (brew install ldid-procursus)")if ((${#missing[@]} > 0)); thendie "Missing required tools: ${missing[*]}. Run: make setup_tools"fi- SSHPASS_BIN="$(command -v sshpass)"-}--_sshpass() {- "$SSHPASS_BIN" -p "$SSH_PASS" "$@"-}--_ssh_retry() {- local attempt rc label- label=${2:-cmd}- for ((attempt = 1; attempt <= SSH_RETRY; attempt++)); do- "$@" && return 0- rc=$?- [[ $rc -ne 255 ]] && return $rc # real command failure — don't retry- echo " [${label}] connection lost (attempt $attempt/$SSH_RETRY), retrying in 3s..." >&2- sleep 3- done- return 255-}--ssh_cmd() {- _ssh_retry _sshpass ssh "${SSH_OPTS[@]}" -p "$SSH_PORT" "$SSH_USER@$SSH_HOST" "$@"-}-scp_to() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" -r "$1" "$SSH_USER@$SSH_HOST:$2"-}-scp_from() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" "$SSH_USER@$SSH_HOST:$1" "$2"-}--remote_file_exists() {- ssh_cmd "test -f '$1'" 2>/dev/null}ldid_sign() {@@ -138,19 +93,6 @@ assert_mount_under_vm() {esac}-# Mount device filesystem, tolerate already-mounted-remote_mount() {- local dev="$1" mnt="$2" opts="${3:-rw}"- ssh_cmd "/bin/mkdir -p $mnt"- if ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- return 0- fi- ssh_cmd "/sbin/mount_apfs -o $opts $dev $mnt 2>/dev/null || true"- if ! ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- die "Failed to mount $dev at $mnt (opts=$opts). Make sure the ramdisk was booted with the expected patched kernel."- fi-}-# ── Find restore directory ─────────────────────────────────────find_restore_dir() {for dir in "$VM_DIR"/iPhone*_Restore; do@@ -213,9 +155,24 @@ cleanup_on_exit() {}trap cleanup_on_exit EXIT-# Host-mode transport override (CFW_HOST_MODE=1): run install against image-# volumes mounted locally on the host instead of a device over SSH.-[[ -n "${CFW_HOST_MODE:-}" ]] && source "$SCRIPT_DIR/cfw_host_mode.sh"+# The VM's Disk.img is attached on the host by cfw_install_host.sh; its APFS+# volumes are mounted here and every file is placed with plain cp/chmod/etc.+# (the VM is off — nothing runs "on the device").+: "${CFW_HOST_CONTAINER:?CFW_HOST_CONTAINER unset — run via cfw_install_host.sh}"+HOST_MNT="${CFW_HOST_MNT:-/private/tmp/cfwhost}"+MNT1="$HOST_MNT/mnt1" # disk1s1 (System / rootfs)+MNT3="$HOST_MNT/mnt3" # disk1s3+TAR="$(command -v gtar 2>/dev/null || echo /opt/homebrew/bin/gtar)" # macOS bsdtar lacks GNU tar flags+mkdir -p "$HOST_MNT"++# Mount an APFS volume of the attached image container at a host mount point.+mount_vol() { # mount_vol <slice, e.g. s1> <mountpoint> [opts]+ local dev="/dev/${CFW_HOST_CONTAINER}$1" mnt="$2" opts="${3:-rw}"+ /bin/mkdir -p "$mnt"+ /sbin/mount | /usr/bin/grep -q " on $mnt " && return 0+ /sbin/mount_apfs -o "$opts" "$dev" "$mnt" 2>/dev/null || true+ /sbin/mount | /usr/bin/grep -q " on $mnt " || die "mount failed: $dev -> $mnt"+}# ════════════════════════════════════════════════════════════════# Main@@ -283,25 +240,25 @@ sudo ${SUDO_ASKPASS:+-A} hdiutil attach -mountpoint "$MNT_SYSOS" "$SYSOS_DMG" -necho " Mounting AppOS..."sudo ${SUDO_ASKPASS:+-A} hdiutil attach -mountpoint "$MNT_APPOS" "$APPOS_DMG" -nobrowse -owners off-# Mount device rootfs (tolerate already-mounted)+# Mount the image's System volume (tolerate already-mounted)echo " Mounting rootfs rw..."-remote_mount /dev/disk1s1 /mnt1+mount_vol s1 "$MNT1"# Patch launchd jetsum guardecho ""echo " Patching launchd (jetsam guard)..."-if ! remote_file_exists "/mnt1/sbin/launchd.bak"; then+if ! [[ -e "$MNT1/sbin/launchd.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/sbin/launchd /mnt1/sbin/launchd.bak"+ /bin/cp $MNT1/sbin/launchd $MNT1/sbin/launchd.bakfi-scp_from "/mnt1/sbin/launchd.bak" "$TEMP_DIR/launchd"+cp "$MNT1/sbin/launchd.bak" "$TEMP_DIR/launchd""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-launchd-jetsam "$TEMP_DIR/launchd"ldid_sign "$TEMP_DIR/launchd"-scp_to "$TEMP_DIR/launchd" "/mnt1/sbin/launchd"-ssh_cmd "/bin/chmod 0755 /mnt1/sbin/launchd"+cp -R "$TEMP_DIR/launchd" "$MNT1/sbin/launchd"+/bin/chmod 0755 $MNT1/sbin/launchdecho " [+] launchd patched"@@ -309,54 +266,32 @@ echo " [+] launchd patched"echo ""echo " Patch debugserver entitlements..."-scp_from "/mnt1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"+cp "$MNT1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"ldid -e "$TEMP_DIR/debugserver" > "$TEMP_DIR/debugserver-entitlements.plist"plutil -remove seatbelt-profiles "$TEMP_DIR/debugserver-entitlements.plist" || trueplutil -insert task_for_pid-allow -bool YES "$TEMP_DIR/debugserver-entitlements.plist" || trueldid_sign_ent "$TEMP_DIR/debugserver" "$TEMP_DIR/debugserver-entitlements.plist"-scp_to "$TEMP_DIR/debugserver" "/mnt1/usr/libexec/debugserver"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/debugserver"+cp -R "$TEMP_DIR/debugserver" "$MNT1/usr/libexec/debugserver"+/bin/chmod 0755 $MNT1/usr/libexec/debugserverecho " [+] debugserver entitlements patched"-# Rename APFS update snapshot to orig-fs (idempotent)-echo " Checking APFS snapshots..."-SNAP_LIST=$(ssh_cmd "snaputil -l /mnt1 2>/dev/null" || true)-if echo "$SNAP_LIST" | grep -q "^orig-fs$"; then- echo " Snapshot 'orig-fs' already exists, skipping rename"-else- UPDATE_SNAP=$(echo "$SNAP_LIST" | grep "^com\.apple\.os\.update-" | head -1)- if [[ -n "$UPDATE_SNAP" ]]; then- echo " Renaming snapshot: $UPDATE_SNAP -> orig-fs"- ssh_cmd "snaputil -n '$UPDATE_SNAP' orig-fs /mnt1"- # Verify rename succeeded- if ! ssh_cmd "snaputil -l /mnt1 2>/dev/null" | grep -q "^orig-fs$"; then- die "Failed to rename snapshot to orig-fs"- fi- echo " Snapshot renamed, remounting..."- ssh_cmd "/sbin/umount /mnt1"- remote_mount /dev/disk1s1 /mnt1- echo " [+] Snapshot renamed to orig-fs"- else- echo " No com.apple.os.update- snapshot found, skipping"- fi-fi-ssh_cmd "/bin/rm -rf /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"-ssh_cmd "/bin/mkdir -p /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"-ssh_cmd "/bin/chmod 0755 /mnt1/System/Cryptexes/App /mnt1/System/Cryptexes/OS"+/bin/rm -rf $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS+/bin/mkdir -p $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS+/bin/chmod 0755 $MNT1/System/Cryptexes/App $MNT1/System/Cryptexes/OS-# Copy Cryptex files to device+# Copy Cryptex files onto the volumeecho " Copying Cryptexes..."-scp_to "$MNT_SYSOS/." "/mnt1/System/Cryptexes/OS"-scp_to "$MNT_APPOS/." "/mnt1/System/Cryptexes/App"+cp -R "$MNT_SYSOS/." "$MNT1/System/Cryptexes/OS"+cp -R "$MNT_APPOS/." "$MNT1/System/Cryptexes/App"# Create dyld symlinks (ln -sf is idempotent)echo " Creating dyld symlinks..."-ssh_cmd "/bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \- /mnt1/System/Library/Caches/com.apple.dyld"-ssh_cmd "/bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \- /mnt1/System/DriverKit/System/Library/dyld"+/bin/ln -sf ../../../System/Cryptexes/OS/System/Library/Caches/com.apple.dyld \+ $MNT1/System/Library/Caches/com.apple.dyld+/bin/ln -sf ../../../../System/Cryptexes/OS/System/DriverKit/System/Library/dyld \+ $MNT1/System/DriverKit/System/Library/dyld# Unmount Cryptex DMGsecho " Unmounting Cryptex DMGs..."@@ -370,21 +305,21 @@ echo ""echo "[2/7] Patching seputil..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/seputil.bak"; then+if ! [[ -e "$MNT1/usr/libexec/seputil.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/seputil /mnt1/usr/libexec/seputil.bak"+ /bin/cp $MNT1/usr/libexec/seputil $MNT1/usr/libexec/seputil.bakfi-scp_from "/mnt1/usr/libexec/seputil.bak" "$TEMP_DIR/seputil"+cp "$MNT1/usr/libexec/seputil.bak" "$TEMP_DIR/seputil""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-seputil "$TEMP_DIR/seputil"ldid_sign "$TEMP_DIR/seputil" "com.apple.seputil"-scp_to "$TEMP_DIR/seputil" "/mnt1/usr/libexec/seputil"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/seputil"+cp -R "$TEMP_DIR/seputil" "$MNT1/usr/libexec/seputil"+/bin/chmod 0755 $MNT1/usr/libexec/seputil# Rename gigalocker (mv to same name is fine on re-run)echo " Renaming gigalocker..."-remote_mount /dev/disk1s3 /mnt3-ssh_cmd '/bin/mv /mnt3/*.gl /mnt3/AA.gl 2>/dev/null || true'+mount_vol s3 "$MNT3"+mv "$MNT3"/*.gl(N) "$MNT3/AA.gl" 2>/dev/null || trueecho " [+] seputil patched"@@ -392,21 +327,21 @@ echo " [+] seputil patched"echo ""echo "[3/7] Installing AppleParavirtGPUMetalIOGPUFamily..."-scp_to "$INPUT_DIR/custom/AppleParavirtGPUMetalIOGPUFamily.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/AppleParavirtGPUMetalIOGPUFamily.tar -C /mnt1"+cp -R "$INPUT_DIR/custom/AppleParavirtGPUMetalIOGPUFamily.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/AppleParavirtGPUMetalIOGPUFamily.tar -C $MNT1-BUNDLE="/mnt1/System/Library/Extensions/AppleParavirtGPUMetalIOGPUFamily.bundle"+BUNDLE="$MNT1/System/Library/Extensions/AppleParavirtGPUMetalIOGPUFamily.bundle"# Clean macOS resource fork files (._* files from tar xattrs)-ssh_cmd "find $BUNDLE -name '._*' -delete 2>/dev/null || true"-ssh_cmd "/usr/sbin/chown -R 0:0 $BUNDLE"-ssh_cmd "/bin/chmod 0755 $BUNDLE"-ssh_cmd "/bin/chmod 0755 $BUNDLE/libAppleParavirtCompilerPluginIOGPUFamily.dylib"-ssh_cmd "/bin/chmod 0755 $BUNDLE/AppleParavirtGPUMetalIOGPUFamily"-ssh_cmd "/bin/chmod 0755 $BUNDLE/_CodeSignature"-ssh_cmd "/bin/chmod 0644 $BUNDLE/_CodeSignature/CodeResources"-ssh_cmd "/bin/chmod 0644 $BUNDLE/Info.plist"-ssh_cmd "/bin/rm -f /mnt1/AppleParavirtGPUMetalIOGPUFamily.tar"+find $BUNDLE -name '._*' -delete 2>/dev/null || true+/usr/sbin/chown -R 0:0 $BUNDLE+/bin/chmod 0755 $BUNDLE+/bin/chmod 0755 $BUNDLE/libAppleParavirtCompilerPluginIOGPUFamily.dylib+/bin/chmod 0755 $BUNDLE/AppleParavirtGPUMetalIOGPUFamily+/bin/chmod 0755 $BUNDLE/_CodeSignature+/bin/chmod 0644 $BUNDLE/_CodeSignature/CodeResources+/bin/chmod 0644 $BUNDLE/Info.plist+/bin/rm -f $MNT1/AppleParavirtGPUMetalIOGPUFamily.tarecho " [+] GPU driver installed"@@ -414,16 +349,14 @@ echo " [+] GPU driver installed"echo ""echo "[4/7] Installing iosbinpack64..."-scp_to "$INPUT_DIR/jb/iosbinpack64.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/iosbinpack64.tar -C /mnt1"-ssh_cmd "/bin/rm -f /mnt1/iosbinpack64.tar"+cp -R "$INPUT_DIR/jb/iosbinpack64.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/iosbinpack64.tar -C $MNT1+/bin/rm -f $MNT1/iosbinpack64.tar-echo " Setting up dropbear host keys..."-ssh_cmd "/bin/mkdir -p /mnt3/dropbear"-ssh_cmd "if [ ! -f /mnt3/dropbear/dropbear_rsa_host_key ]; then /usr/local/bin/dropbearkey -t rsa -f /mnt3/dropbear/dropbear_rsa_host_key >/dev/null; fi"-ssh_cmd "if [ ! -f /mnt3/dropbear/dropbear_ecdsa_host_key ]; then /usr/local/bin/dropbearkey -t ecdsa -f /mnt3/dropbear/dropbear_ecdsa_host_key >/dev/null; fi"-ssh_cmd "/bin/chmod 600 /mnt3/dropbear/dropbear_rsa_host_key /mnt3/dropbear/dropbear_ecdsa_host_key"+# dropbear host keys are generated on first boot by dropbear -R; just ensure+# the key directory exists for it to write into.+/bin/mkdir -p $MNT3/dropbearecho " [+] iosbinpack64 installed"@@ -432,16 +365,16 @@ echo ""echo "[5/7] Patching launchd_cache_loader..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/launchd_cache_loader.bak"; then+if ! [[ -e "$MNT1/usr/libexec/launchd_cache_loader.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/launchd_cache_loader /mnt1/usr/libexec/launchd_cache_loader.bak"+ /bin/cp $MNT1/usr/libexec/launchd_cache_loader $MNT1/usr/libexec/launchd_cache_loader.bakfi-scp_from "/mnt1/usr/libexec/launchd_cache_loader.bak" "$TEMP_DIR/launchd_cache_loader"+cp "$MNT1/usr/libexec/launchd_cache_loader.bak" "$TEMP_DIR/launchd_cache_loader""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-launchd-cache-loader "$TEMP_DIR/launchd_cache_loader"ldid_sign "$TEMP_DIR/launchd_cache_loader" "com.apple.launchd_cache_loader"-scp_to "$TEMP_DIR/launchd_cache_loader" "/mnt1/usr/libexec/launchd_cache_loader"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/launchd_cache_loader"+cp -R "$TEMP_DIR/launchd_cache_loader" "$MNT1/usr/libexec/launchd_cache_loader"+/bin/chmod 0755 $MNT1/usr/libexec/launchd_cache_loaderecho " [+] launchd_cache_loader patched"@@ -450,16 +383,16 @@ echo ""echo "[6/7] Patching mobileactivationd..."# Always patch from .bak (original unpatched binary)-if ! remote_file_exists "/mnt1/usr/libexec/mobileactivationd.bak"; then+if ! [[ -e "$MNT1/usr/libexec/mobileactivationd.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/usr/libexec/mobileactivationd /mnt1/usr/libexec/mobileactivationd.bak"+ /bin/cp $MNT1/usr/libexec/mobileactivationd $MNT1/usr/libexec/mobileactivationd.bakfi-scp_from "/mnt1/usr/libexec/mobileactivationd.bak" "$TEMP_DIR/mobileactivationd"+cp "$MNT1/usr/libexec/mobileactivationd.bak" "$TEMP_DIR/mobileactivationd""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-mobileactivationd "$TEMP_DIR/mobileactivationd"ldid_sign "$TEMP_DIR/mobileactivationd"-scp_to "$TEMP_DIR/mobileactivationd" "/mnt1/usr/libexec/mobileactivationd"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/mobileactivationd"+cp -R "$TEMP_DIR/mobileactivationd" "$MNT1/usr/libexec/mobileactivationd"+/bin/chmod 0755 $MNT1/usr/libexec/mobileactivationdecho " [+] mobileactivationd patched"@@ -496,8 +429,8 @@ if [[ "$needs_vphoned_build" == "1" ]]; thenficp "$VPHONED_BIN" "$TEMP_DIR/vphoned"ldid_sign_ent "$TEMP_DIR/vphoned" "$VPHONED_SRC/entitlements.plist"-scp_to "$TEMP_DIR/vphoned" "/mnt1/usr/bin/vphoned"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/bin/vphoned"+cp -R "$TEMP_DIR/vphoned" "$MNT1/usr/bin/vphoned"+/bin/chmod 0755 $MNT1/usr/bin/vphoned# Keep a copy of the signed binary for host-side auto-updatecp "$TEMP_DIR/vphoned" "$VM_DIR/.vphoned.signed"echo " [+] vphoned installed (signed copy at .vphoned.signed)"@@ -510,32 +443,32 @@ for plist in bash.plist dropbear.plist trollvnc.plist rpcserver_ios.plist; docp "$INPUT_DIR/jb/LaunchDaemons/dropbear.plist" "$plist_src""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" patch-dropbear-plist "$plist_src"fi- scp_to "$plist_src" "/mnt1/System/Library/LaunchDaemons/"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/$plist"+ cp -R "$plist_src" "$MNT1/System/Library/LaunchDaemons/"+ /bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/$plistdone-scp_to "$VPHONED_SRC/vphoned.plist" "/mnt1/System/Library/LaunchDaemons/"-ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/vphoned.plist"+cp -R "$VPHONED_SRC/vphoned.plist" "$MNT1/System/Library/LaunchDaemons/"+/bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/vphoned.plist# Always patch launchd.plist from .bak (original)echo " Patching launchd.plist..."-if ! remote_file_exists "/mnt1/System/Library/xpc/launchd.plist.bak"; then+if ! [[ -e "$MNT1/System/Library/xpc/launchd.plist.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/System/Library/xpc/launchd.plist /mnt1/System/Library/xpc/launchd.plist.bak"+ /bin/cp $MNT1/System/Library/xpc/launchd.plist $MNT1/System/Library/xpc/launchd.plist.bakfi-scp_from "/mnt1/System/Library/xpc/launchd.plist.bak" "$TEMP_DIR/launchd.plist"+cp "$MNT1/System/Library/xpc/launchd.plist.bak" "$TEMP_DIR/launchd.plist"cp "$VPHONED_SRC/vphoned.plist" "$INPUT_DIR/jb/LaunchDaemons/""$PYTHON3" "$SCRIPT_DIR/patchers/cfw.py" inject-daemons "$TEMP_DIR/launchd.plist" "$INPUT_DIR/jb/LaunchDaemons"-scp_to "$TEMP_DIR/launchd.plist" "/mnt1/System/Library/xpc/launchd.plist"-ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/xpc/launchd.plist"+cp -R "$TEMP_DIR/launchd.plist" "$MNT1/System/Library/xpc/launchd.plist"+/bin/chmod 0644 $MNT1/System/Library/xpc/launchd.plistecho " [+] LaunchDaemons installed"# ═══════════ CLEANUP ═════════════════════════════════════════echo ""-echo "[*] Unmounting device filesystems..."-ssh_cmd "/sbin/umount /mnt1 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt3 2>/dev/null || true"+echo "[*] Unmounting image volumes..."+/sbin/umount $MNT1 2>/dev/null || true+/sbin/umount $MNT3 2>/dev/null || true# Keep .cfw_temp/Cryptex*.dmg cached (slow to re-create)# Only remove temp binaries@@ -548,11 +481,5 @@ rm -f "$TEMP_DIR/seputil" \echo ""echo "[+] CFW installation complete!"-echo " Reboot to apply changes."+echo " Boot to apply changes."echo " After boot, SSH will be available on port 22222 (password: alpine)"--if [[ "$CFW_SKIP_HALT" == "1" ]]; then- echo "[*] CFW_SKIP_HALT=1, skipping halt."-else- ssh_cmd "/sbin/halt" || true-fidiff --git a/scripts/cfw_install_exp.sh b/scripts/cfw_install_exp.shindex 6e642d53..c5da8f72 100755--- a/scripts/cfw_install_exp.sh+++ b/scripts/cfw_install_exp.sh@@ -1,6 +1,7 @@#!/bin/zsh# cfw_install_exp.sh — Install base CFW + JB extensions + EXP experimental-# patches on vphone via SSH ramdisk.+# patches on vphone. Files are placed directly on the VM's Disk.img volumes,+# which cfw_install_host.sh attaches and mounts on the host; the VM must be off.## Runs the base CFW installer first (phases 1-7), the JB-specific# modifications (launchd jetsam patch, dylib injection, procursus bootstrap,@@ -12,7 +13,7 @@# slot re-attest of the standalone Mach-O.# - EXP-JB-6 : post-restore DT identity rewrite (root model /# target-type / compatible[0]) inside-# /mnt5/.../devicetree.img4.+# $MNT5/.../devicetree.img4.# - EXP-JB-7 : optional ProductBuildVersion rewrite in# SystemVersion.plist (gated on the SPOOF_BUILD env var).#@@ -133,8 +134,8 @@ fi# Now run the regular CFW install. It will see the cached (patched)# CryptexSystemOS.dmg and use it as-is, so the patched DSC chunks land-# in /mnt1/System/Cryptexes/OS on the device.-CFW_SKIP_HALT=1 zsh "$SCRIPT_DIR/cfw_install.sh" "$VM_DIR"+# in $MNT1/System/Cryptexes/OS.+zsh "$SCRIPT_DIR/cfw_install.sh" "$VM_DIR"# ════════════════════════════════════════════════════════════════# Step 2: JB-specific phases@@ -150,20 +151,6 @@ CFW_JB_ARCHIVE="cfw_jb_input.tar.zst"TEMP_DIR="$VM_DIR/.cfw_temp"DISABLE_LAUNCHD_HOOK="${DISABLE_LAUNCHD_HOOK:-0}"-SSH_PORT="${SSH_PORT:-2222}"-SSH_PASS="alpine"-SSH_USER="root"-SSH_HOST="localhost"-SSH_RETRY="${SSH_RETRY:-3}"-SSHPASS_BIN=""-SSH_OPTS=(- -o StrictHostKeyChecking=no- -o UserKnownHostsFile=/dev/null- -o PreferredAuthentications=password- -o ConnectTimeout=30- -q-)-# ── Helpers ─────────────────────────────────────────────────────die() {echo "[-] $*" >&2@@ -172,44 +159,11 @@ die() {check_prerequisites() {local missing=()- command -v sshpass &>/dev/null || missing+=("sshpass")command -v ldid &>/dev/null || missing+=("ldid (brew install ldid-procursus)")command -v xcrun &>/dev/null || missing+=("xcrun (Xcode command line tools)")if ((${#missing[@]} > 0)); thendie "Missing required tools: ${missing[*]}. Run: make setup_tools"fi- SSHPASS_BIN="$(command -v sshpass)"-}--_sshpass() {- "$SSHPASS_BIN" -p "$SSH_PASS" "$@"-}--_ssh_retry() {- local attempt rc label- label=${2:-cmd}- for ((attempt = 1; attempt <= SSH_RETRY; attempt++)); do- "$@" && return 0- rc=$?- [[ $rc -ne 255 ]] && return $rc # real command failure — don't retry- echo " [${label}] connection lost (attempt $attempt/$SSH_RETRY), retrying in 3s..." >&2- sleep 3- done- return 255-}--ssh_cmd() {- _ssh_retry _sshpass ssh "${SSH_OPTS[@]}" -p "$SSH_PORT" "$SSH_USER@$SSH_HOST" "$@"-}-scp_to() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" -r "$1" "$SSH_USER@$SSH_HOST:$2"-}-scp_from() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" "$SSH_USER@$SSH_HOST:$1" "$2"-}--remote_file_exists() {- ssh_cmd "test -f '$1'" 2>/dev/null}ldid_sign() {@@ -250,7 +204,7 @@ build_tweakloader() {}# Builds the libvcamcaptured.dylib injected into /usr/libexec/cameracaptured-# via the TweakLoader allowlist. Output goes to TEMP_DIR; caller scp's the+# via the TweakLoader allowlist. Output goes to TEMP_DIR; caller copies the# binary + companion plist to procursus/Library/MobileSubstrate/DynamicLibraries.build_libvcamcaptured() {local src="$SCRIPT_DIR/vcamcaptured/libvcamcaptured.m"@@ -319,20 +273,8 @@ build_libcamfix() {echo "$out"}-remote_mount() {- local dev="$1" mnt="$2" opts="${3:-rw}"- ssh_cmd "/bin/mkdir -p $mnt"- if ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- return 0- fi- ssh_cmd "/sbin/mount_apfs -o $opts $dev $mnt 2>/dev/null || true"- if ! ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- die "Failed to mount $dev at $mnt (opts=$opts). Make sure the ramdisk was booted with the expected patched kernel."- fi-}-get_boot_manifest_hash() {- ssh_cmd "/bin/ls /mnt5 2>/dev/null" | awk 'length($0)==96{print; exit}'+ /bin/ls $MNT5 2>/dev/null | awk 'length($0)==96{print; exit}'}# ── Setup JB input resources ──────────────────────────────────@@ -370,9 +312,25 @@ apply_dev_overlay() {die "Dev overlay not found (cfw_dev/rpcserver_ios)"}-# Host-mode transport override (CFW_HOST_MODE=1): run install against image-# volumes mounted locally on the host instead of a device over SSH.-[[ -n "${CFW_HOST_MODE:-}" ]] && source "$SCRIPT_DIR/cfw_host_mode.sh"+# The VM's Disk.img is attached on the host by cfw_install_host.sh; its APFS+# volumes are mounted here and every file is placed with plain cp/chmod/etc.+# (the VM is off — nothing runs "on the device").+: "${CFW_HOST_CONTAINER:?CFW_HOST_CONTAINER unset — run via cfw_install_host.sh}"+HOST_MNT="${CFW_HOST_MNT:-/private/tmp/cfwhost}"+MNT1="$HOST_MNT/mnt1" # disk1s1 (System / rootfs)+MNT3="$HOST_MNT/mnt3" # disk1s3+MNT5="$HOST_MNT/mnt5" # disk1s5 (per-boot-manifest OS dir / procursus bootstrap)+TAR="$(command -v gtar 2>/dev/null || echo /opt/homebrew/bin/gtar)" # macOS bsdtar lacks GNU tar flags+mkdir -p "$HOST_MNT"++# Mount an APFS volume of the attached image container at a host mount point.+mount_vol() { # mount_vol <slice, e.g. s1> <mountpoint> [opts]+ local dev="/dev/${CFW_HOST_CONTAINER}$1" mnt="$2" opts="${3:-rw}"+ /bin/mkdir -p "$mnt"+ /sbin/mount | /usr/bin/grep -q " on $mnt " && return 0+ /sbin/mount_apfs -o "$opts" "$dev" "$mnt" 2>/dev/null || true+ /sbin/mount | /usr/bin/grep -q " on $mnt " || die "mount failed: $dev -> $mnt"+}# ── Check JB prerequisites ────────────────────────────────────command -v zstd >/dev/null 2>&1 || die "'zstd' not found (required for JB bootstrap phase)"@@ -385,19 +343,19 @@ check_prerequisitesmkdir -p "$TEMP_DIR"-# Mount device rootfs (may already be mounted from base install)-remote_mount /dev/disk1s1 /mnt1+# Mount the image's System volume (may already be mounted from base install)+mount_vol s1 "$MNT1"# ═══════════ JB-1 PATCH LAUNCHD (JETSAM + DYLIB INJECTION) ════echo ""echo "[JB-1] Patching launchd (jetsam guard + hook injection)..."-if ! remote_file_exists "/mnt1/sbin/launchd.bak"; then+if ! [[ -e "$MNT1/sbin/launchd.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/sbin/launchd /mnt1/sbin/launchd.bak"+ /bin/cp $MNT1/sbin/launchd $MNT1/sbin/launchd.bakfi-scp_from "/mnt1/sbin/launchd.bak" "$TEMP_DIR/launchd"+cp "$MNT1/sbin/launchd.bak" "$TEMP_DIR/launchd"# Extract original entitlements before patching (must preserve for spawn permissions)echo " Extracting original entitlements..."@@ -428,8 +386,8 @@ if [[ -s "$TEMP_DIR/launchd.entitlements" ]]; thenelseldid_sign "$TEMP_DIR/launchd"fi-scp_to "$TEMP_DIR/launchd" "/mnt1/sbin/launchd"-ssh_cmd "/bin/chmod 0755 /mnt1/sbin/launchd"+cp -R "$TEMP_DIR/launchd" "$MNT1/sbin/launchd"+/bin/chmod 0755 $MNT1/sbin/launchdecho " [+] launchd patched"@@ -438,10 +396,10 @@ echo ""echo "[JB-2] Installing iosbinpack64..."apply_dev_overlay-scp_to "$VM_DIR/$CFW_INPUT/jb/iosbinpack64.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/iosbinpack64.tar -C /mnt1"-ssh_cmd "/bin/rm -f /mnt1/iosbinpack64.tar"+cp -R "$VM_DIR/$CFW_INPUT/jb/iosbinpack64.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/iosbinpack64.tar -C $MNT1+/bin/rm -f $MNT1/iosbinpack64.tarecho " [+] iosbinpack64 installed"@@ -449,13 +407,13 @@ echo " [+] iosbinpack64 installed"echo ""echo "[JB-3] Patching debugserver entitlements..."-scp_from "/mnt1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"+cp "$MNT1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"ldid -e "$TEMP_DIR/debugserver" > "$TEMP_DIR/debugserver-entitlements.plist"plutil -remove seatbelt-profiles "$TEMP_DIR/debugserver-entitlements.plist" || trueplutil -insert task_for_pid-allow -bool YES "$TEMP_DIR/debugserver-entitlements.plist" || trueldid_sign_ent "$TEMP_DIR/debugserver" "$TEMP_DIR/debugserver-entitlements.plist"-scp_to "$TEMP_DIR/debugserver" "/mnt1/usr/libexec/debugserver"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/debugserver"+cp -R "$TEMP_DIR/debugserver" "$MNT1/usr/libexec/debugserver"+/bin/chmod 0755 $MNT1/usr/libexec/debugserverecho " [+] debugserver entitlements patched"@@ -486,10 +444,10 @@ echo " [+] debugserver entitlements patched"echo ""echo "[EXP-JB-3.5] Patching watchdogd hv_vmm_present cache..."-scp_from "/mnt1/usr/libexec/watchdogd" "$TEMP_DIR/watchdogd"+cp "$MNT1/usr/libexec/watchdogd" "$TEMP_DIR/watchdogd""$SCRIPT_DIR/patch_hv_vmm_userland.sh" watchdogd "$TEMP_DIR/watchdogd"-scp_to "$TEMP_DIR/watchdogd" "/mnt1/usr/libexec/watchdogd"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/watchdogd"+cp -R "$TEMP_DIR/watchdogd" "$MNT1/usr/libexec/watchdogd"+/bin/chmod 0755 $MNT1/usr/libexec/watchdogdecho " [+] watchdogd patched"@@ -498,9 +456,9 @@ echo " [+] watchdogd patched"echo ""echo "[JB-4] Installing procursus bootstrap..."-remote_mount /dev/disk1s5 /mnt5+mount_vol s5 "$MNT5"BOOT_HASH="$(get_boot_manifest_hash)"-[[ -n "$BOOT_HASH" ]] || die "Could not find 96-char boot manifest hash in /mnt5"+[[ -n "$BOOT_HASH" ]] || die "Could not find 96-char boot manifest hash in $MNT5"echo " Boot manifest hash: $BOOT_HASH"BOOTSTRAP_ZST="$JB_INPUT_DIR/jb/bootstrap-iphoneos-arm64.tar.zst"@@ -510,27 +468,27 @@ SILEO_DEB="$JB_INPUT_DIR/jb/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"BOOTSTRAP_TAR="$TEMP_DIR/bootstrap-iphoneos-arm64.tar"zstd -d -f "$BOOTSTRAP_ZST" -o "$BOOTSTRAP_TAR"-scp_to "$BOOTSTRAP_TAR" "/mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"+cp -R "$BOOTSTRAP_TAR" "$MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"if [[ -f "$SILEO_DEB" ]]; then- scp_to "$SILEO_DEB" "/mnt5/$BOOT_HASH/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"+ cp -R "$SILEO_DEB" "$MNT5/$BOOT_HASH/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"fiJB_DIR_NAME="jb-vphone"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/jb"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/bin/mkdir -p /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/bin/chmod 0755 /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/usr/sbin/chown 0:0 /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/usr/bin/tar --preserve-permissions -xf /mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar \- -C /mnt5/$BOOT_HASH/$JB_DIR_NAME/"-ssh_cmd "/bin/mv /mnt5/$BOOT_HASH/$JB_DIR_NAME/var /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus"-ssh_cmd "/bin/mv /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb/* /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus 2>/dev/null || true"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb"-ssh_cmd "/bin/rm -f /mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"+/bin/rm -rf $MNT5/$BOOT_HASH/jb+/bin/rm -rf $MNT5/$BOOT_HASH/$JB_DIR_NAME+/bin/mkdir -p $MNT5/$BOOT_HASH/$JB_DIR_NAME+/bin/chmod 0755 $MNT5/$BOOT_HASH/$JB_DIR_NAME+/usr/sbin/chown 0:0 $MNT5/$BOOT_HASH/$JB_DIR_NAME+"$TAR" --preserve-permissions -xf $MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar \+ -C $MNT5/$BOOT_HASH/$JB_DIR_NAME/+/bin/mv $MNT5/$BOOT_HASH/$JB_DIR_NAME/var $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus+mv "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb"/*(N) "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus" 2>/dev/null || true+/bin/rm -rf $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb+/bin/rm -f $MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tarrm -f "$BOOTSTRAP_TAR"# NOTE: /var/jb symlink is created on first normal boot by vphone_jb_setup.sh-# (Data volume is encrypted and not mountable from ramdisk).+# (Data volume is encrypted and not mountable at install time).echo " [+] procursus bootstrap installed"@@ -543,9 +501,9 @@ if [[ -d "$BASEBIN_DIR" ]]; then# Clean previous dylibs before re-uploadingecho " Cleaning old /cores/ dylibs..."- ssh_cmd "/bin/rm -rf /mnt1/cores"- ssh_cmd "/bin/mkdir -p /mnt1/cores"- ssh_cmd "/bin/chmod 0755 /mnt1/cores"+ /bin/rm -rf $MNT1/cores+ /bin/mkdir -p $MNT1/cores+ /bin/chmod 0755 $MNT1/cores# Install all pre-built dylibs from basebin payloadfor dylib in "$BASEBIN_DIR"/*.dylib; do@@ -553,8 +511,8 @@ if [[ -d "$BASEBIN_DIR" ]]; thendylib_name="$(basename "$dylib")"echo " Installing $dylib_name..."ldid_sign "$dylib"- scp_to "$dylib" "/mnt1/cores/$dylib_name"- ssh_cmd "/bin/chmod 0755 /mnt1/cores/$dylib_name"+ cp -R "$dylib" "$MNT1/cores/$dylib_name"+ /bin/chmod 0755 $MNT1/cores/$dylib_namedone# Short alias for launchdhook (header space is tight)@@ -562,9 +520,9 @@ if [[ -d "$BASEBIN_DIR" ]]; thenecho " Installing short launchdhook alias at /b..."cp "$BASEBIN_DIR/launchdhook.dylib" "$TEMP_DIR/b"ldid_sign "$TEMP_DIR/b"- ssh_cmd "/bin/rm -f /mnt1/b"- scp_to "$TEMP_DIR/b" "/mnt1/b"- ssh_cmd "/bin/chmod 0755 /mnt1/b"+ /bin/rm -f $MNT1/b+ cp -R "$TEMP_DIR/b" "$MNT1/b"+ /bin/chmod 0755 $MNT1/bfiecho " [+] BaseBin hooks deployed"@@ -575,10 +533,10 @@ echo ""echo "[JB-4] Building and installing TweakLoader..."TWEAKLOADER_OUT="$(build_tweakloader)"-ssh_cmd "/bin/mkdir -p /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib"-scp_to "$TWEAKLOADER_OUT" "/mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"-ssh_cmd "/usr/sbin/chown 0:0 /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"-ssh_cmd "/bin/chmod 0755 /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"+/bin/mkdir -p $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib+cp -R "$TWEAKLOADER_OUT" "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"+/usr/sbin/chown 0:0 $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib+/bin/chmod 0755 $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylibecho " [+] TweakLoader installed to procursus/usr/lib/TweakLoader.dylib"@@ -590,18 +548,18 @@ echo " [+] TweakLoader installed to procursus/usr/lib/TweakLoader.dylib"echo ""echo "[JB-4.1] Building and installing libvcamcaptured..."LIBVCAM_OUT="$(build_libvcamcaptured)"-LIBVCAM_DIR="/mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/Library/MobileSubstrate/DynamicLibraries"-ssh_cmd "/bin/mkdir -p $LIBVCAM_DIR"-scp_to "$LIBVCAM_OUT" "$LIBVCAM_DIR/libvcamcaptured.dylib"-ssh_cmd "/usr/sbin/chown 0:0 $LIBVCAM_DIR/libvcamcaptured.dylib"-ssh_cmd "/bin/chmod 0755 $LIBVCAM_DIR/libvcamcaptured.dylib"+LIBVCAM_DIR="$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/Library/MobileSubstrate/DynamicLibraries"+/bin/mkdir -p $LIBVCAM_DIR+cp -R "$LIBVCAM_OUT" "$LIBVCAM_DIR/libvcamcaptured.dylib"+/usr/sbin/chown 0:0 $LIBVCAM_DIR/libvcamcaptured.dylib+/bin/chmod 0755 $LIBVCAM_DIR/libvcamcaptured.dylib# The plist tells TweakLoader to load the dylib only inside cameracaptured# (Filter.Executables = ["cameracaptured"]); keep it next to the dylib.LIBVCAM_PLIST="$SCRIPT_DIR/vcamcaptured/libvcamcaptured.plist"if [[ -f "$LIBVCAM_PLIST" ]]; then- scp_to "$LIBVCAM_PLIST" "$LIBVCAM_DIR/libvcamcaptured.plist"- ssh_cmd "/bin/chmod 0644 $LIBVCAM_DIR/libvcamcaptured.plist"+ cp -R "$LIBVCAM_PLIST" "$LIBVCAM_DIR/libvcamcaptured.plist"+ /bin/chmod 0644 $LIBVCAM_DIR/libvcamcaptured.plistfiecho " [+] libvcamcaptured installed to procursus/Library/MobileSubstrate/DynamicLibraries/"@@ -614,14 +572,14 @@ echo " [+] libvcamcaptured installed to procursus/Library/MobileSubstrate/Dynamecho ""echo "[JB-4.2] Building and installing libcamfix..."LIBCAMFIX_OUT="$(build_libcamfix)"-scp_to "$LIBCAMFIX_OUT" "$LIBVCAM_DIR/libcamfix.dylib"-ssh_cmd "/usr/sbin/chown 0:0 $LIBVCAM_DIR/libcamfix.dylib"-ssh_cmd "/bin/chmod 0755 $LIBVCAM_DIR/libcamfix.dylib"+cp -R "$LIBCAMFIX_OUT" "$LIBVCAM_DIR/libcamfix.dylib"+/usr/sbin/chown 0:0 $LIBVCAM_DIR/libcamfix.dylib+/bin/chmod 0755 $LIBVCAM_DIR/libcamfix.dylibLIBCAMFIX_PLIST="$SCRIPT_DIR/camfix/libcamfix.plist"if [[ -f "$LIBCAMFIX_PLIST" ]]; then- scp_to "$LIBCAMFIX_PLIST" "$LIBVCAM_DIR/libcamfix.plist"- ssh_cmd "/bin/chmod 0644 $LIBVCAM_DIR/libcamfix.plist"+ cp -R "$LIBCAMFIX_PLIST" "$LIBVCAM_DIR/libcamfix.plist"+ /bin/chmod 0644 $LIBVCAM_DIR/libcamfix.plistfiecho " [+] libcamfix installed to procursus/Library/MobileSubstrate/DynamicLibraries/"@@ -633,17 +591,17 @@ echo "[JB-5] Deploying first-boot setup..."SETUP_SCRIPT="$SCRIPT_DIR/vphone_jb_setup.sh"SETUP_PLIST="$SCRIPT_DIR/vphone_jb_setup.plist"if [[ -f "$SETUP_SCRIPT" ]]; then- scp_to "$SETUP_SCRIPT" "/mnt1/cores/vphone_jb_setup.sh"- ssh_cmd "/bin/chmod 0755 /mnt1/cores/vphone_jb_setup.sh"+ cp -R "$SETUP_SCRIPT" "$MNT1/cores/vphone_jb_setup.sh"+ /bin/chmod 0755 $MNT1/cores/vphone_jb_setup.shecho " [+] vphone_jb_setup.sh -> /cores/"fiif [[ -f "$SETUP_PLIST" ]]; then- scp_to "$SETUP_PLIST" "/mnt1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"+ cp -R "$SETUP_PLIST" "$MNT1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"+ /bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist# Inject into launchd.plist so launchd starts it at bootecho " Injecting com.vphone.jb-setup into launchd.plist..."- scp_from "/mnt1/System/Library/xpc/launchd.plist" "$TEMP_DIR/launchd.plist"+ cp "$MNT1/System/Library/xpc/launchd.plist" "$TEMP_DIR/launchd.plist""$PYTHON3" -c "import plistlib, syswith open(sys.argv[1], 'rb') as f:@@ -654,8 +612,8 @@ target.setdefault('LaunchDaemons', {})['/System/Library/LaunchDaemons/com.vphonewith open(sys.argv[1], 'wb') as f:plistlib.dump(target, f, sort_keys=False)" "$TEMP_DIR/launchd.plist" "$SETUP_PLIST"- scp_to "$TEMP_DIR/launchd.plist" "/mnt1/System/Library/xpc/launchd.plist"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/xpc/launchd.plist"+ cp -R "$TEMP_DIR/launchd.plist" "$MNT1/System/Library/xpc/launchd.plist"+ /bin/chmod 0644 $MNT1/System/Library/xpc/launchd.plistecho " [+] com.vphone.jb-setup.plist injected into launchd.plist"fi@@ -673,9 +631,9 @@ fi# image4_validate_property_callback bypass patches accept any IM4P# contents on subsequent boots.#-# /mnt5 is still mounted at this point in the install flow (the umount-# happens in the CLEANUP block below). We scp the live devicetree.img4-# down, patch it on the host, scp it back. Next boot, iBoot loads the+# $MNT5 is still mounted at this point in the install flow (the umount+# happens in the CLEANUP block below). We copy the live devicetree.img4+# out, patch it on the host, copy it back. Next boot, iBoot loads the# modified DT, kernel populates machine_info from the new values, and# sysctl hw.machine / hw.product / hw.model flip to iPhone17,3 / D47 /# (whatever IOPlatformExpert resolves from compatible[0]=D47AP).@@ -688,14 +646,14 @@ fiif [[ -z "$BOOT_HASH" ]]; thenecho " [-] BOOT_HASH not discoverable, skipping EXP-JB-6"else- JB6_DT_REMOTE="/mnt5/$BOOT_HASH/usr/standalone/firmware/devicetree.img4"+ JB6_DT_REMOTE="$MNT5/$BOOT_HASH/usr/standalone/firmware/devicetree.img4"JB6_DT_LOCAL="$TEMP_DIR/devicetree.img4"- if ssh_cmd "test -f '$JB6_DT_REMOTE'" 2>/dev/null; then- scp_from "$JB6_DT_REMOTE" "$JB6_DT_LOCAL"+ if [[ -e "$JB6_DT_REMOTE" ]]; then+ cp "$JB6_DT_REMOTE" "$JB6_DT_LOCAL""$PYTHON3" "$SCRIPT_DIR/patchers/cfw_patch_post_restore_dt.py" "$JB6_DT_LOCAL"- scp_to "$JB6_DT_LOCAL" "$JB6_DT_REMOTE"- ssh_cmd "/usr/sbin/chown 0:0 $JB6_DT_REMOTE"- ssh_cmd "/bin/chmod 0644 $JB6_DT_REMOTE"+ cp -R "$JB6_DT_LOCAL" "$JB6_DT_REMOTE"+ /usr/sbin/chown 0:0 $JB6_DT_REMOTE+ /bin/chmod 0644 $JB6_DT_REMOTEecho " [+] devicetree.img4 rewritten in place"elseecho " [-] $JB6_DT_REMOTE not found, skipping EXP-JB-6"@@ -719,8 +677,8 @@ fi# Both are plain plist files (no Apple signature on individual plists),# so no image4 / cdHash / TXM concerns. Both volumes are writable at# install time:-# /mnt1 (rootfs) — writable before the install-time seal is established-# /mnt5 (preboot) — apfs writable+# $MNT1 (rootfs) — writable before the install-time seal is established+# $MNT5 (preboot) — apfs writable## After this, Settings -> About -> Build, MG BuildVersion key, and every# framework that reads SystemVersion.plist see the new identifier.@@ -733,15 +691,15 @@ if [[ -n "${SPOOF_BUILD:-}" ]]; thenecho "[EXP-JB-7] Rewriting ProductBuildVersion to $SPOOF_BUILD in SystemVersion plists..."for jb7_remote in \- "/mnt1/System/Library/CoreServices/SystemVersion.plist" \- "/mnt5/Cryptexes/OS/System/Library/CoreServices/SystemVersion.plist"+ "$MNT1/System/Library/CoreServices/SystemVersion.plist" \+ "$MNT5/Cryptexes/OS/System/Library/CoreServices/SystemVersion.plist"do- if ssh_cmd "test -f '$jb7_remote'" 2>/dev/null; then+ if [[ -e "$jb7_remote" ]]; thenjb7_local="$TEMP_DIR/$(echo "$jb7_remote" | tr '/' '_').plist"- scp_from "$jb7_remote" "$jb7_local"+ cp "$jb7_remote" "$jb7_local""$PYTHON3" "$SCRIPT_DIR/patchers/cfw_patch_build_version.py" \"$jb7_local" "$SPOOF_BUILD"- scp_to "$jb7_local" "$jb7_remote"+ cp -R "$jb7_local" "$jb7_remote"elseecho " [-] $jb7_remote not found, skipping"fi@@ -753,11 +711,10 @@ fi# ═══════════ CLEANUP ═════════════════════════════════════════echo ""-echo "[*] Unmounting device filesystems..."-ssh_cmd "/sbin/umount /mnt1 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt2 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt3 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt5 2>/dev/null || true"+echo "[*] Unmounting image volumes..."+/sbin/umount $MNT1 2>/dev/null || true+/sbin/umount $MNT3 2>/dev/null || true+/sbin/umount $MNT5 2>/dev/null || trueecho "[*] Cleaning up temp binaries..."rm -f "$TEMP_DIR/launchd" \@@ -765,7 +722,5 @@ rm -f "$TEMP_DIR/launchd" \echo ""echo "[+] CFW + JB + EXP installation complete!"-echo " Reboot to apply changes."+echo " Boot to apply changes."echo " After boot, SSH will be available on port 22222 (password: alpine)"--ssh_cmd "/sbin/halt" || truediff --git a/scripts/cfw_install_host.sh b/scripts/cfw_install_host.shindex d640ece2..91b75b91 100755--- a/scripts/cfw_install_host.sh+++ b/scripts/cfw_install_host.sh@@ -1,11 +1,10 @@#!/bin/zsh-# cfw_install_host.sh — ramdisk-free CFW install.+# cfw_install_host.sh — CFW install by host-mounting the VM's Disk.img.#-# Replaces the DFU + ramdisk_send + iproxy + SSH install path: places every-# CFW file by mounting the VM's Disk.img on the host (CFW_HOST_MODE, see-# cfw_host_mode.sh) and flips the boot snapshot offline-# (tools/apfs_snap_rename.py) so the VM boots the live volume. The resulting-# VM is identical to the ramdisk-installed one, minus the ramdisk round-trips.+# Attaches the VM's Disk.img on the host and hands the container to the variant+# installer (cfw_install*.sh), which mounts the APFS volumes and places every+# CFW file directly. Then flips the boot snapshot offline+# (tools/apfs_snap_rename.py) so the VM boots the live volume.## Prereqs: VM restored (make restore) and powered off; host has gnu-tar, ipsw,# aea, ldid, zstd, project venv (make setup_tools). SIP disabled (project@@ -63,15 +62,15 @@ CONT="${SYS%s*}"echo "[*] attached: container=$CONT system=$SYS"cleanup() {- for m in /private/tmp/cfwhost/mnt1 /private/tmp/cfwhost/mnt2 /private/tmp/cfwhost/mnt3 /private/tmp/cfwhost/mnt5; do+ for m in /private/tmp/cfwhost/mnt1 /private/tmp/cfwhost/mnt3 /private/tmp/cfwhost/mnt5; doumount "$m" 2>/dev/null || truedonehdiutil detach "$BASEDISK" 2>/dev/null || diskutil eject "$BASEDISK" 2>/dev/null || true}trap cleanup EXIT-echo "[*] running $INSTALLER in CFW_HOST_MODE (files placed on host mounts)..."-( cd "$VM_DIR" && CFW_HOST_MODE=1 CFW_HOST_CONTAINER="$CONT" _VPHONE_PATH="$P" \+echo "[*] running $INSTALLER (files placed on host mounts)..."+( cd "$VM_DIR" && CFW_HOST_CONTAINER="$CONT" _VPHONE_PATH="$P" \${SPOOF_BUILD:+SPOOF_BUILD="$SPOOF_BUILD"} zsh "$SCRIPT_DIR/$INSTALLER" . )cleanupdiff --git a/scripts/cfw_install_jb.sh b/scripts/cfw_install_jb.shindex 47fcaa9a..13818736 100755--- a/scripts/cfw_install_jb.sh+++ b/scripts/cfw_install_jb.sh@@ -1,9 +1,10 @@#!/bin/zsh-# cfw_install_jb.sh — Install base CFW + JB extensions on vphone via SSH ramdisk.+# cfw_install_jb.sh — Install base CFW + JB extensions on vphone.## Runs the base CFW installer first (phases 1-7), then applies JB-specific# modifications: launchd jetsam patch, dylib injection, procursus bootstrap,-# and BaseBin hook deployment.+# and BaseBin hook deployment. Files are placed directly on the VM's Disk.img+# volumes, which cfw_install_host.sh attaches and mounts on the host; VM off.## Prerequisites (in addition to cfw_install.sh requirements):# - cfw_jb_input/ or resources/cfw_jb_input.tar.zst present@@ -31,11 +32,11 @@ _resolve_python3() {PYTHON3="$(_resolve_python3)"# ════════════════════════════════════════════════════════════════-# Step 1: Run base CFW install (skip halt — we continue with JB phases)+# Step 1: Run base CFW install, then continue with JB phases# ════════════════════════════════════════════════════════════════echo "[*] cfw_install_jb.sh — Installing CFW + JB extensions..."echo ""-CFW_SKIP_HALT=1 zsh "$SCRIPT_DIR/cfw_install.sh" "$VM_DIR"+zsh "$SCRIPT_DIR/cfw_install.sh" "$VM_DIR"# ════════════════════════════════════════════════════════════════# Step 2: JB-specific phases@@ -51,20 +52,6 @@ CFW_JB_ARCHIVE="cfw_jb_input.tar.zst"TEMP_DIR="$VM_DIR/.cfw_temp"DISABLE_LAUNCHD_HOOK="${DISABLE_LAUNCHD_HOOK:-0}"-SSH_PORT="${SSH_PORT:-2222}"-SSH_PASS="alpine"-SSH_USER="root"-SSH_HOST="localhost"-SSH_RETRY="${SSH_RETRY:-3}"-SSHPASS_BIN=""-SSH_OPTS=(- -o StrictHostKeyChecking=no- -o UserKnownHostsFile=/dev/null- -o PreferredAuthentications=password- -o ConnectTimeout=30- -q-)-# ── Helpers ─────────────────────────────────────────────────────die() {echo "[-] $*" >&2@@ -73,44 +60,11 @@ die() {check_prerequisites() {local missing=()- command -v sshpass &>/dev/null || missing+=("sshpass")command -v ldid &>/dev/null || missing+=("ldid (brew install ldid-procursus)")command -v xcrun &>/dev/null || missing+=("xcrun (Xcode command line tools)")if ((${#missing[@]} > 0)); thendie "Missing required tools: ${missing[*]}. Run: make setup_tools"fi- SSHPASS_BIN="$(command -v sshpass)"-}--_sshpass() {- "$SSHPASS_BIN" -p "$SSH_PASS" "$@"-}--_ssh_retry() {- local attempt rc label- label=${2:-cmd}- for ((attempt = 1; attempt <= SSH_RETRY; attempt++)); do- "$@" && return 0- rc=$?- [[ $rc -ne 255 ]] && return $rc # real command failure — don't retry- echo " [${label}] connection lost (attempt $attempt/$SSH_RETRY), retrying in 3s..." >&2- sleep 3- done- return 255-}--ssh_cmd() {- _ssh_retry _sshpass ssh "${SSH_OPTS[@]}" -p "$SSH_PORT" "$SSH_USER@$SSH_HOST" "$@"-}-scp_to() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" -r "$1" "$SSH_USER@$SSH_HOST:$2"-}-scp_from() {- _ssh_retry _sshpass scp -q "${SSH_OPTS[@]}" -P "$SSH_PORT" "$SSH_USER@$SSH_HOST:$1" "$2"-}--remote_file_exists() {- ssh_cmd "test -f '$1'" 2>/dev/null}ldid_sign() {@@ -150,20 +104,8 @@ build_tweakloader() {echo "$out"}-remote_mount() {- local dev="$1" mnt="$2" opts="${3:-rw}"- ssh_cmd "/bin/mkdir -p $mnt"- if ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- return 0- fi- ssh_cmd "/sbin/mount_apfs -o $opts $dev $mnt 2>/dev/null || true"- if ! ssh_cmd "/sbin/mount | /usr/bin/grep -q ' on $mnt '"; then- die "Failed to mount $dev at $mnt (opts=$opts). Make sure the ramdisk was booted with the expected patched kernel."- fi-}-get_boot_manifest_hash() {- ssh_cmd "/bin/ls /mnt5 2>/dev/null" | awk 'length($0)==96{print; exit}'+ /bin/ls $MNT5 2>/dev/null | awk 'length($0)==96{print; exit}'}# ── Setup JB input resources ──────────────────────────────────@@ -201,9 +143,25 @@ apply_dev_overlay() {die "Dev overlay not found (cfw_dev/rpcserver_ios)"}-# Host-mode transport override (CFW_HOST_MODE=1): run the JB phases against-# image volumes mounted locally on the host instead of a device over SSH.-[[ -n "${CFW_HOST_MODE:-}" ]] && source "$SCRIPT_DIR/cfw_host_mode.sh"+# The VM's Disk.img is attached on the host by cfw_install_host.sh; its APFS+# volumes are mounted here and every file is placed with plain cp/chmod/etc.+# (the VM is off — nothing runs "on the device").+: "${CFW_HOST_CONTAINER:?CFW_HOST_CONTAINER unset — run via cfw_install_host.sh}"+HOST_MNT="${CFW_HOST_MNT:-/private/tmp/cfwhost}"+MNT1="$HOST_MNT/mnt1" # disk1s1 (System / rootfs)+MNT3="$HOST_MNT/mnt3" # disk1s3+MNT5="$HOST_MNT/mnt5" # disk1s5 (per-boot-manifest OS dir / procursus bootstrap)+TAR="$(command -v gtar 2>/dev/null || echo /opt/homebrew/bin/gtar)" # macOS bsdtar lacks GNU tar flags+mkdir -p "$HOST_MNT"++# Mount an APFS volume of the attached image container at a host mount point.+mount_vol() { # mount_vol <slice, e.g. s1> <mountpoint> [opts]+ local dev="/dev/${CFW_HOST_CONTAINER}$1" mnt="$2" opts="${3:-rw}"+ /bin/mkdir -p "$mnt"+ /sbin/mount | /usr/bin/grep -q " on $mnt " && return 0+ /sbin/mount_apfs -o "$opts" "$dev" "$mnt" 2>/dev/null || true+ /sbin/mount | /usr/bin/grep -q " on $mnt " || die "mount failed: $dev -> $mnt"+}# ── Check JB prerequisites ────────────────────────────────────command -v zstd >/dev/null 2>&1 || die "'zstd' not found (required for JB bootstrap phase)"@@ -216,19 +174,19 @@ check_prerequisitesmkdir -p "$TEMP_DIR"-# Mount device rootfs (may already be mounted from base install)-remote_mount /dev/disk1s1 /mnt1+# Mount the image's System volume (may already be mounted from base install)+mount_vol s1 "$MNT1"# ═══════════ JB-1 PATCH LAUNCHD (JETSAM + DYLIB INJECTION) ════echo ""echo "[JB-1] Patching launchd (jetsam guard + hook injection)..."-if ! remote_file_exists "/mnt1/sbin/launchd.bak"; then+if ! [[ -e "$MNT1/sbin/launchd.bak" ]]; thenecho " Creating backup..."- ssh_cmd "/bin/cp /mnt1/sbin/launchd /mnt1/sbin/launchd.bak"+ /bin/cp $MNT1/sbin/launchd $MNT1/sbin/launchd.bakfi-scp_from "/mnt1/sbin/launchd.bak" "$TEMP_DIR/launchd"+cp "$MNT1/sbin/launchd.bak" "$TEMP_DIR/launchd"# Extract original entitlements before patching (must preserve for spawn permissions)echo " Extracting original entitlements..."@@ -259,8 +217,8 @@ if [[ -s "$TEMP_DIR/launchd.entitlements" ]]; thenelseldid_sign "$TEMP_DIR/launchd"fi-scp_to "$TEMP_DIR/launchd" "/mnt1/sbin/launchd"-ssh_cmd "/bin/chmod 0755 /mnt1/sbin/launchd"+cp -R "$TEMP_DIR/launchd" "$MNT1/sbin/launchd"+/bin/chmod 0755 $MNT1/sbin/launchdecho " [+] launchd patched"@@ -269,10 +227,10 @@ echo ""echo "[JB-2] Installing iosbinpack64..."apply_dev_overlay-scp_to "$VM_DIR/$CFW_INPUT/jb/iosbinpack64.tar" "/mnt1"-ssh_cmd "/usr/bin/tar --preserve-permissions --no-overwrite-dir \- -xf /mnt1/iosbinpack64.tar -C /mnt1"-ssh_cmd "/bin/rm -f /mnt1/iosbinpack64.tar"+cp -R "$VM_DIR/$CFW_INPUT/jb/iosbinpack64.tar" "$MNT1"+"$TAR" --preserve-permissions --no-overwrite-dir \+ -xf $MNT1/iosbinpack64.tar -C $MNT1+/bin/rm -f $MNT1/iosbinpack64.tarecho " [+] iosbinpack64 installed"@@ -280,13 +238,13 @@ echo " [+] iosbinpack64 installed"echo ""echo "[JB-3] Patching debugserver entitlements..."-scp_from "/mnt1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"+cp "$MNT1/usr/libexec/debugserver" "$TEMP_DIR/debugserver"ldid -e "$TEMP_DIR/debugserver" > "$TEMP_DIR/debugserver-entitlements.plist"plutil -remove seatbelt-profiles "$TEMP_DIR/debugserver-entitlements.plist" || trueplutil -insert task_for_pid-allow -bool YES "$TEMP_DIR/debugserver-entitlements.plist" || trueldid_sign_ent "$TEMP_DIR/debugserver" "$TEMP_DIR/debugserver-entitlements.plist"-scp_to "$TEMP_DIR/debugserver" "/mnt1/usr/libexec/debugserver"-ssh_cmd "/bin/chmod 0755 /mnt1/usr/libexec/debugserver"+cp -R "$TEMP_DIR/debugserver" "$MNT1/usr/libexec/debugserver"+/bin/chmod 0755 $MNT1/usr/libexec/debugserverecho " [+] debugserver entitlements patched"@@ -295,9 +253,9 @@ echo " [+] debugserver entitlements patched"echo ""echo "[JB-4] Installing procursus bootstrap..."-remote_mount /dev/disk1s5 /mnt5+mount_vol s5 "$MNT5"BOOT_HASH="$(get_boot_manifest_hash)"-[[ -n "$BOOT_HASH" ]] || die "Could not find 96-char boot manifest hash in /mnt5"+[[ -n "$BOOT_HASH" ]] || die "Could not find 96-char boot manifest hash in $MNT5"echo " Boot manifest hash: $BOOT_HASH"BOOTSTRAP_ZST="$JB_INPUT_DIR/jb/bootstrap-iphoneos-arm64.tar.zst"@@ -307,27 +265,27 @@ SILEO_DEB="$JB_INPUT_DIR/jb/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"BOOTSTRAP_TAR="$TEMP_DIR/bootstrap-iphoneos-arm64.tar"zstd -d -f "$BOOTSTRAP_ZST" -o "$BOOTSTRAP_TAR"-scp_to "$BOOTSTRAP_TAR" "/mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"+cp -R "$BOOTSTRAP_TAR" "$MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"if [[ -f "$SILEO_DEB" ]]; then- scp_to "$SILEO_DEB" "/mnt5/$BOOT_HASH/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"+ cp -R "$SILEO_DEB" "$MNT5/$BOOT_HASH/org.coolstar.sileo_2.5.1_iphoneos-arm64.deb"fiJB_DIR_NAME="jb-vphone"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/jb"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/bin/mkdir -p /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/bin/chmod 0755 /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/usr/sbin/chown 0:0 /mnt5/$BOOT_HASH/$JB_DIR_NAME"-ssh_cmd "/usr/bin/tar --preserve-permissions -xf /mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar \- -C /mnt5/$BOOT_HASH/$JB_DIR_NAME/"-ssh_cmd "/bin/mv /mnt5/$BOOT_HASH/$JB_DIR_NAME/var /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus"-ssh_cmd "/bin/mv /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb/* /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus 2>/dev/null || true"-ssh_cmd "/bin/rm -rf /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb"-ssh_cmd "/bin/rm -f /mnt5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar"+/bin/rm -rf $MNT5/$BOOT_HASH/jb+/bin/rm -rf $MNT5/$BOOT_HASH/$JB_DIR_NAME+/bin/mkdir -p $MNT5/$BOOT_HASH/$JB_DIR_NAME+/bin/chmod 0755 $MNT5/$BOOT_HASH/$JB_DIR_NAME+/usr/sbin/chown 0:0 $MNT5/$BOOT_HASH/$JB_DIR_NAME+"$TAR" --preserve-permissions -xf $MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tar \+ -C $MNT5/$BOOT_HASH/$JB_DIR_NAME/+/bin/mv $MNT5/$BOOT_HASH/$JB_DIR_NAME/var $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus+mv "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb"/*(N) "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus" 2>/dev/null || true+/bin/rm -rf $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/jb+/bin/rm -f $MNT5/$BOOT_HASH/bootstrap-iphoneos-arm64.tarrm -f "$BOOTSTRAP_TAR"# NOTE: /var/jb symlink is created on first normal boot by vphone_jb_setup.sh-# (Data volume is encrypted and not mountable from ramdisk).+# (Data volume is encrypted and not mountable at install time).echo " [+] procursus bootstrap installed"@@ -340,9 +298,9 @@ if [[ -d "$BASEBIN_DIR" ]]; then# Clean previous dylibs before re-uploadingecho " Cleaning old /cores/ dylibs..."- ssh_cmd "/bin/rm -rf /mnt1/cores"- ssh_cmd "/bin/mkdir -p /mnt1/cores"- ssh_cmd "/bin/chmod 0755 /mnt1/cores"+ /bin/rm -rf $MNT1/cores+ /bin/mkdir -p $MNT1/cores+ /bin/chmod 0755 $MNT1/cores# Install all pre-built dylibs from basebin payloadfor dylib in "$BASEBIN_DIR"/*.dylib; do@@ -350,8 +308,8 @@ if [[ -d "$BASEBIN_DIR" ]]; thendylib_name="$(basename "$dylib")"echo " Installing $dylib_name..."ldid_sign "$dylib"- scp_to "$dylib" "/mnt1/cores/$dylib_name"- ssh_cmd "/bin/chmod 0755 /mnt1/cores/$dylib_name"+ cp -R "$dylib" "$MNT1/cores/$dylib_name"+ /bin/chmod 0755 $MNT1/cores/$dylib_namedone# Short alias for launchdhook (header space is tight)@@ -359,9 +317,9 @@ if [[ -d "$BASEBIN_DIR" ]]; thenecho " Installing short launchdhook alias at /b..."cp "$BASEBIN_DIR/launchdhook.dylib" "$TEMP_DIR/b"ldid_sign "$TEMP_DIR/b"- ssh_cmd "/bin/rm -f /mnt1/b"- scp_to "$TEMP_DIR/b" "/mnt1/b"- ssh_cmd "/bin/chmod 0755 /mnt1/b"+ /bin/rm -f $MNT1/b+ cp -R "$TEMP_DIR/b" "$MNT1/b"+ /bin/chmod 0755 $MNT1/bfiecho " [+] BaseBin hooks deployed"@@ -372,10 +330,10 @@ echo ""echo "[JB-4] Building and installing TweakLoader..."TWEAKLOADER_OUT="$(build_tweakloader)"-ssh_cmd "/bin/mkdir -p /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib"-scp_to "$TWEAKLOADER_OUT" "/mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"-ssh_cmd "/usr/sbin/chown 0:0 /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"-ssh_cmd "/bin/chmod 0755 /mnt5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"+/bin/mkdir -p $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib+cp -R "$TWEAKLOADER_OUT" "$MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib"+/usr/sbin/chown 0:0 $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylib+/bin/chmod 0755 $MNT5/$BOOT_HASH/$JB_DIR_NAME/procursus/usr/lib/TweakLoader.dylibecho " [+] TweakLoader installed to procursus/usr/lib/TweakLoader.dylib"@@ -387,17 +345,17 @@ echo "[JB-5] Deploying first-boot setup..."SETUP_SCRIPT="$SCRIPT_DIR/vphone_jb_setup.sh"SETUP_PLIST="$SCRIPT_DIR/vphone_jb_setup.plist"if [[ -f "$SETUP_SCRIPT" ]]; then- scp_to "$SETUP_SCRIPT" "/mnt1/cores/vphone_jb_setup.sh"- ssh_cmd "/bin/chmod 0755 /mnt1/cores/vphone_jb_setup.sh"+ cp -R "$SETUP_SCRIPT" "$MNT1/cores/vphone_jb_setup.sh"+ /bin/chmod 0755 $MNT1/cores/vphone_jb_setup.shecho " [+] vphone_jb_setup.sh -> /cores/"fiif [[ -f "$SETUP_PLIST" ]]; then- scp_to "$SETUP_PLIST" "/mnt1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"+ cp -R "$SETUP_PLIST" "$MNT1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist"+ /bin/chmod 0644 $MNT1/System/Library/LaunchDaemons/com.vphone.jb-setup.plist# Inject into launchd.plist so launchd starts it at bootecho " Injecting com.vphone.jb-setup into launchd.plist..."- scp_from "/mnt1/System/Library/xpc/launchd.plist" "$TEMP_DIR/launchd.plist"+ cp "$MNT1/System/Library/xpc/launchd.plist" "$TEMP_DIR/launchd.plist""$PYTHON3" -c "import plistlib, syswith open(sys.argv[1], 'rb') as f:@@ -408,17 +366,17 @@ target.setdefault('LaunchDaemons', {})['/System/Library/LaunchDaemons/com.vphonewith open(sys.argv[1], 'wb') as f:plistlib.dump(target, f, sort_keys=False)" "$TEMP_DIR/launchd.plist" "$SETUP_PLIST"- scp_to "$TEMP_DIR/launchd.plist" "/mnt1/System/Library/xpc/launchd.plist"- ssh_cmd "/bin/chmod 0644 /mnt1/System/Library/xpc/launchd.plist"+ cp -R "$TEMP_DIR/launchd.plist" "$MNT1/System/Library/xpc/launchd.plist"+ /bin/chmod 0644 $MNT1/System/Library/xpc/launchd.plistecho " [+] com.vphone.jb-setup.plist injected into launchd.plist"fi# ═══════════ CLEANUP ═════════════════════════════════════════echo ""-echo "[*] Unmounting device filesystems..."-ssh_cmd "/sbin/umount /mnt1 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt3 2>/dev/null || true"-ssh_cmd "/sbin/umount /mnt5 2>/dev/null || true"+echo "[*] Unmounting image volumes..."+/sbin/umount $MNT1 2>/dev/null || true+/sbin/umount $MNT3 2>/dev/null || true+/sbin/umount $MNT5 2>/dev/null || trueecho "[*] Cleaning up temp binaries..."rm -f "$TEMP_DIR/launchd" \@@ -426,7 +384,5 @@ rm -f "$TEMP_DIR/launchd" \echo ""echo "[+] CFW + JB installation complete!"-echo " Reboot to apply changes."+echo " Boot to apply changes."echo " After boot, SSH will be available on port 22222 (password: alpine)"--ssh_cmd "/sbin/halt" || truediff --git a/scripts/patchers/cfw_patch_post_restore_dt.py b/scripts/patchers/cfw_patch_post_restore_dt.pyindex 90311167..84e141fb 100644--- a/scripts/patchers/cfw_patch_post_restore_dt.py+++ b/scripts/patchers/cfw_patch_post_restore_dt.py@@ -15,8 +15,8 @@ mode cross-checks DT root `model` / `target-type` against theBuildManifest's signed identity and rejects the device on mismatch — butthey are NOT boot-time-fatal. After restore completes, the existing iBSS /iBEC / LLB image4_validate_property_callback bypass patches accept any-IM4P contents, so re-patching the DT on the booted-into-ramdisk system-before the device reboots into the rootfs is safe.+IM4P contents, so re-patching the DT offline (on the host-mounted restored+filesystem) before the device boots into the rootfs is safe.The `compatible` rewrite is a reorder, not a replacement: VPHONE600APstays in the list (now as the second entry) so IOKit's platform-expert@@ -30,11 +30,11 @@ Layout summary:OR "VPHONE600AP\\0iPhone17,3\\0AppleVirtualPlatformARM\\0\\0" (48B, post-Tier1b)after: "D47AP\\0VPHONE600AP\\0AppleVirtualPlatformARM\\0" + 6 NUL pad (48B)-This script runs on the host. The install pipeline scp_from's the-devicetree.img4 from `/mnt5/<boot-hash>/usr/standalone/firmware/`, this-script edits it in place, and the install pipeline scp_to's it back to-the same path. The boot-manifest-hash directory is the same one-discovered by `get_boot_manifest_hash` in `cfw_install_jb.sh`.+This script runs on the host. The install pipeline copies the+devicetree.img4 out of the host-mounted `/mnt5/<boot-hash>/usr/standalone/firmware/`,+this script edits it in place, and the pipeline copies it back to the same+path. The boot-manifest-hash directory is the same one discovered by+`get_boot_manifest_hash` in `cfw_install_jb.sh`.Dependencies:pip install pyimg4diff --git a/scripts/pymobiledevice3_bridge.py b/scripts/pymobiledevice3_bridge.pyindex 7f497729..52ef3ba6 100755--- a/scripts/pymobiledevice3_bridge.py+++ b/scripts/pymobiledevice3_bridge.py@@ -105,78 +105,6 @@ def wait_for_irecv(ecid: Optional[int], timeout: int, is_recovery: Optional[boolraise TimeoutError(f"Timed out waiting for {mode_label} endpoint")-def irecv_send_file(irecv: IRecv, image_path: Path) -> None:- data = image_path.read_bytes()- irecv.send_buffer(data)---def resolve_kernel_image(ramdisk_dir: Path) -> Path:- ramdisk_variant = ramdisk_dir / "krnl.ramdisk.img4"- if ramdisk_variant.exists():- return ramdisk_variant- default_kernel = ramdisk_dir / "krnl.img4"- if default_kernel.exists():- return default_kernel- raise FileNotFoundError(f"Kernel image not found in {ramdisk_dir}")---def cmd_ramdisk_send(ecid: Optional[int], ramdisk_dir: Path, timeout: int) -> None:- if not ramdisk_dir.is_dir():- raise FileNotFoundError(f"Ramdisk directory not found: {ramdisk_dir}")-- kernel_img = resolve_kernel_image(ramdisk_dir)-- print(f"[*] Sending ramdisk from {ramdisk_dir}")- if kernel_img.name == "krnl.ramdisk.img4":- print(" [*] Using ramdisk kernel variant: krnl.ramdisk.img4")-- irecv = wait_for_irecv(ecid, timeout=timeout, is_recovery=False)-- # 1) DFU stage: iBSS + iBEC, then switch to recovery.- print(" [1/8] Loading iBSS...")- irecv_send_file(irecv, ramdisk_dir / "iBSS.vresearch101.RELEASE.img4")-- print(" [2/8] Loading iBEC...")- irecv_send_file(irecv, ramdisk_dir / "iBEC.vresearch101.RELEASE.img4")- irecv.send_command("go", b_request=1)- time.sleep(1)-- print(" [*] Waiting for device to reconnect in recovery...")- irecv = wait_for_irecv(ecid, timeout=timeout, is_recovery=True)- print(" [*] Reconnected in recovery")-- # 2) Recovery stage payload chain.- print(" [3/8] Loading SPTM...")- irecv_send_file(irecv, ramdisk_dir / "sptm.vresearch1.release.img4")- irecv.send_command("firmware")-- print(" [4/8] Loading TXM...")- irecv_send_file(irecv, ramdisk_dir / "txm.img4")- irecv.send_command("firmware")-- print(" [5/8] Loading trustcache...")- irecv_send_file(irecv, ramdisk_dir / "trustcache.img4")- irecv.send_command("firmware")-- print(" [6/8] Loading ramdisk...")- irecv_send_file(irecv, ramdisk_dir / "ramdisk.img4")- time.sleep(2)- irecv.send_command("ramdisk")-- print(" [7/8] Loading device tree...")- irecv_send_file(irecv, ramdisk_dir / "DeviceTree.vphone600ap.img4")- irecv.send_command("devicetree")-- print(" [8/8] Loading SEP...")- irecv_send_file(irecv, ramdisk_dir / "sep-firmware.vresearch101.RELEASE.img4")- irecv.send_command("firmware")-- print(" [*] Booting kernel...")- irecv_send_file(irecv, kernel_img)- irecv.send_command("bootx", b_request=1)-- print("[+] Boot sequence complete. Device should be booting into ramdisk.")-def derive_shsh_output(vm_dir: Path, ecid: Optional[int]) -> Path:tag = f"{ecid:016X}" if ecid is not None else "auto"@@ -247,21 +175,6 @@ def recovery_probe_command(wait_for_irecv(parsed_ecid, timeout=timeout)[email protected]("ramdisk-send", help="Send ramdisk chain over irecv")-def ramdisk_send_command(- ecid: Optional[str] = typer.Option(None, help="Hex ECID (with/without 0x)"),- timeout: int = typer.Option(90, help="Send timeout in seconds"),- ramdisk_dir: Path = typer.Option(- Path("Ramdisk"),- help="Ramdisk directory",- exists=False,- file_okay=False,- dir_okay=True,- ),-) -> None:- cmd_ramdisk_send(require_ecid(ecid), ramdisk_dir, timeout)--@app.command("restore-get-shsh", help="Fetch SHSH from prepared restore dir")def restore_get_shsh_command(vm_dir: Path = typer.Option(diff --git a/scripts/ramdisk_build.py b/scripts/ramdisk_build.pydeleted file mode 100755index e30358e1..00000000--- a/scripts/ramdisk_build.py+++ /dev/null@@ -1,888 +0,0 @@-#!/usr/bin/env python3-"""-build_ramdisk.py — Build a signed SSH ramdisk for vphone600.--Expects the VM restore tree to have already been patched by the Swift firmware pipeline.-Extracts patched components, signs with SHSH, and builds SSH ramdisk.--Usage:- python3 build_ramdisk.py [vm_directory]--Directory structure:- ./shsh/ — SHSH blobs (auto-discovered)- ./ramdisk_input/ — Tools and SSH resources (auto-setup from CFW)- ./ramdisk_builder_temp/ — Intermediate .raw files (cleaned up)- ./Ramdisk/ — Final signed IMG4 output--Prerequisites:- pip install pyimg4- Run make fw_patch / make fw_patch_dev / make fw_patch_jb first to patch boot-chain components.-"""--import gzip-import glob-import os-import plistlib-import shutil-import subprocess-import sys-import tempfile--from pyimg4 import IM4M, IM4P, IMG4--_SCRIPT_DIR = os.path.dirname(os.path.abspath(__file__))--# ══════════════════════════════════════════════════════════════════-# Configuration-# ══════════════════════════════════════════════════════════════════--OUTPUT_DIR = "Ramdisk"-TEMP_DIR = "ramdisk_builder_temp"-INPUT_DIR = "ramdisk_input"-RESTORED_EXTERNAL_PATH = "usr/local/bin/restored_external"-RESTORED_EXTERNAL_SERIAL_MARKER = b"SSHRD_Script Sep 22 2022 18:56:50"-DEFAULT_IBEC_BOOT_ARGS = b"serial=3 -v debug=0x2014e %s"--# Ramdisk boot-args-RAMDISK_BOOT_ARGS = b"serial=3 rd=md0 debug=0x2014e -v wdt=-1 %s"--# IM4P fourccs for restore mode-TXM_FOURCC = "trxm"-KERNEL_FOURCC = "rkrn"-RAMDISK_KERNEL_SUFFIX = ".ramdisk"-RAMDISK_KERNEL_IMG4 = "krnl.ramdisk.img4"-SUDO_PASSWORD = os.environ.get("VPHONE_SUDO_PASSWORD", None)--# Files to remove from ramdisk to save space-RAMDISK_REMOVE = [- "usr/bin/img4tool",- "usr/bin/img4",- "usr/sbin/dietappleh13camerad",- "usr/sbin/dietappleh16camerad",- "usr/local/bin/wget",- "usr/local/bin/procexp",- "usr/standalone/firmware/S6TUUP1",-]--# Directories to re-sign in ramdisk-SIGN_DIRS = [- "usr/local/bin/*",- "usr/local/lib/*",- "usr/bin/*",- "bin/*",- "usr/lib/*",- "sbin/*",- "usr/sbin/*",- "usr/libexec/*",-]--# Compressed archive of ramdisk_input/ (located next to this script)-INPUT_ARCHIVE = "ramdisk_input.tar.zst"-PATCHER_BINARY_ENV = "VPHONE_PATCHER_BINARY"---# ══════════════════════════════════════════════════════════════════-# Setup — extract ramdisk_input/ from zstd archive if needed-# ══════════════════════════════════════════════════════════════════---def setup_input(vm_dir):- """Ensure ramdisk_input/ exists, extracting from .tar.zst if needed."""- input_dir = os.path.join(vm_dir, INPUT_DIR)-- if os.path.isdir(input_dir):- return input_dir-- # Look for archive next to this script, then in vm_dir- for search_dir in (os.path.join(_SCRIPT_DIR, "resources"), _SCRIPT_DIR, vm_dir):- archive = os.path.join(search_dir, INPUT_ARCHIVE)- if os.path.isfile(archive):- print(f" Extracting {INPUT_ARCHIVE}...")- subprocess.run(- ["tar", "--zstd", "-xf", archive, "-C", vm_dir],- check=True,- )- return input_dir-- print(f"[-] Neither {INPUT_DIR}/ nor {INPUT_ARCHIVE} found.")- print(f" Place {INPUT_ARCHIVE} next to this script or in the VM directory.")- sys.exit(1)---# ══════════════════════════════════════════════════════════════════-# SHSH / signing helpers-# ══════════════════════════════════════════════════════════════════---def find_shsh(shsh_dir):- """Find first SHSH blob in directory."""- for ext in ("*.shsh", "*.shsh2"):- matches = sorted(glob.glob(os.path.join(shsh_dir, ext)))- if matches:- return matches[0]- return None---def extract_im4m(shsh_path, im4m_path):- """Extract IM4M manifest from SHSH blob (handles gzip-compressed)."""- raw = open(shsh_path, "rb").read()- if raw[:2] == b"\x1f\x8b":- raw = gzip.decompress(raw)- tmp = shsh_path + ".tmp"- try:- open(tmp, "wb").write(raw)- subprocess.run(- ["pyimg4", "im4m", "extract", "-i", tmp, "-o", im4m_path],- check=True,- capture_output=True,- )- finally:- if os.path.exists(tmp):- os.remove(tmp)---def sign_img4(im4p_path, img4_path, im4m_path, tag=None):- """Create IMG4 from IM4P + IM4M using pyimg4 Python API."""- im4p = IM4P(open(im4p_path, "rb").read())- if tag:- im4p.fourcc = tag- im4m = IM4M(open(im4m_path, "rb").read())- img4 = IMG4(im4p=im4p, im4m=im4m)- with open(img4_path, "wb") as f:- f.write(img4.output())---def run(cmd, **kwargs):- """Run a command, raising on failure."""- return subprocess.run(cmd, check=True, **kwargs)---def run_sudo(cmd, **kwargs):- """Run hdiutil directly first, then retry through sudo if required."""- if not cmd or os.path.basename(cmd[0]) != "hdiutil":- return run(cmd, **kwargs)-- # SUDO_PASSWORD flow exports SUDO_ASKPASS: go straight to sudo -A so- # hdiutil never runs unprivileged first (which triggers an auth prompt).- if os.environ.get("SUDO_ASKPASS"):- return run(["sudo", "-A", *cmd], **kwargs)-- try:- return run(cmd, **kwargs)- except subprocess.CalledProcessError:- if SUDO_PASSWORD:- return run(- ["sudo", "-S", *cmd],- input=f"{SUDO_PASSWORD}\n",- text=True,- **kwargs,- )- return run(["sudo", *cmd], **kwargs)---def detach_mountpoint(mountpoint, required=False):- """Detach hdiutil mountpoints used during ramdisk builds."""- try:- run_sudo(["hdiutil", "detach", "-force", mountpoint], capture_output=True)- except subprocess.CalledProcessError:- if required:- raise---def ensure_path_within_vm(path, vm_dir, label):- """Fail if path escapes vm_dir."""- vm_real = os.path.realpath(vm_dir)- path_real = os.path.realpath(path)- if path_real == vm_real or path_real.startswith(vm_real + os.sep):- return- print(f"[-] {label} must be inside VM dir")- print(f" VM dir: {vm_real}")- print(f" Path: {path_real}")- sys.exit(1)---def check_prerequisites():- """Verify required host tools are available."""- missing = []- for tool, pkg in [("gtar", "gnu-tar"), ("ldid", "ldid-procursus"), ("trustcache", "trustcache (make setup_tools)")]:- if not shutil.which(tool):- missing.append(f" {tool:12s} — {pkg}")- if missing:- print("[-] Missing required tools:")- for m in missing:- print(m)- print("\n Run: make setup_tools")- sys.exit(1)---def project_root():- return os.path.abspath(os.path.join(_SCRIPT_DIR, ".."))---def patcher_binary_path():- override = os.environ.get(PATCHER_BINARY_ENV, "").strip()- if override:- return os.path.abspath(override)- return os.path.join(project_root(), ".build", "debug", "vphone-cli")---def run_swift_patch_component(component, src_path, output_path):- """Patch a single component via the Swift FirmwarePatcher CLI."""- binary = patcher_binary_path()- if not os.path.isfile(binary):- print(f"[-] Swift patcher binary not found: {binary}")- print(" Run: make patcher_build")- sys.exit(1)-- run(- [- binary,- "patch-component",- "--component",- component,- "--input",- src_path,- "--output",- output_path,- "--quiet",- ]- )---def load_firmware(path):- """Load firmware file, auto-detecting IM4P vs raw."""- with open(path, "rb") as f:- raw = f.read()-- try:- im4p = IM4P(raw)- if im4p.payload.compression:- im4p.payload.decompress()- return im4p, bytearray(im4p.payload.data), True, raw- except Exception:- return None, bytearray(raw), False, raw---def _save_im4p_with_payp(path, fourcc, patched_data, original_raw):- """Repackage as LZFSE-compressed IM4P and append PAYP from original."""- with (- tempfile.NamedTemporaryFile(suffix=".raw", delete=False) as tmp_raw,- tempfile.NamedTemporaryFile(suffix=".im4p", delete=False) as tmp_im4p,- ):- tmp_raw_path = tmp_raw.name- tmp_im4p_path = tmp_im4p.name- tmp_raw.write(bytes(patched_data))-- try:- subprocess.run(- [- "pyimg4",- "im4p",- "create",- "-i",- tmp_raw_path,- "-o",- tmp_im4p_path,- "-f",- fourcc,- "--lzfse",- ],- check=True,- capture_output=True,- )- output = bytearray(open(tmp_im4p_path, "rb").read())- finally:- os.unlink(tmp_raw_path)- os.unlink(tmp_im4p_path)-- payp_offset = original_raw.rfind(b"PAYP")- if payp_offset >= 0:- payp_data = original_raw[payp_offset - 10 :]- output.extend(payp_data)- old_len = int.from_bytes(output[2:5], "big")- output[2:5] = (old_len + len(payp_data)).to_bytes(3, "big")- print(f" [+] preserved PAYP ({len(payp_data)} bytes)")-- with open(path, "wb") as f:- f.write(output)---def find_restore_dir(base_dir):- for entry in sorted(os.listdir(base_dir)):- full = os.path.join(base_dir, entry)- if os.path.isdir(full) and "Restore" in entry:- return full- return None---def find_file(base_dir, patterns, label):- for pattern in patterns:- matches = sorted(glob.glob(os.path.join(base_dir, pattern)))- if matches:- return matches[0]- print(f"[-] {label} not found. Searched patterns:")- for pattern in patterns:- print(f" {os.path.join(base_dir, pattern)}")- sys.exit(1)---# ══════════════════════════════════════════════════════════════════-# Firmware extraction and IM4P creation-# ══════════════════════════════════════════════════════════════════---def extract_to_raw(src_path, raw_path):- """Extract IM4P payload to .raw file. Returns (im4p_obj, data, original_raw)."""- im4p, data, was_im4p, original_raw = load_firmware(src_path)- with open(raw_path, "wb") as f:- f.write(bytes(data))- return im4p, data, original_raw---def create_im4p_uncompressed(raw_data, fourcc, description, output_path):- """Create uncompressed IM4P from raw data."""- new_im4p = IM4P(- fourcc=fourcc,- description=description,- payload=bytes(raw_data),- )- with open(output_path, "wb") as f:- f.write(new_im4p.output())---def build_kernel_img4(kernel_src, output_dir, temp_dir, im4m_path, output_name, temp_tag):- """Build one signed kernel IMG4 from a kernelcache source file."""- kc_raw = os.path.join(temp_dir, f"{temp_tag}.raw")- kc_im4p = os.path.join(temp_dir, f"{temp_tag}.im4p")- _, data, original_raw = extract_to_raw(kernel_src, kc_raw)- print(f" source: {kernel_src}")- print(f" format: IM4P, {len(data)} bytes")- _save_im4p_with_payp(kc_im4p, KERNEL_FOURCC, data, original_raw)- sign_img4(kc_im4p, os.path.join(output_dir, output_name), im4m_path)- print(f" [+] {output_name}")---def _find_pristine_cloudos_kernel():- """Find a pristine CloudOS vphone600 research kernel from project ipsws/."""- env_path = os.environ.get("RAMDISK_BASE_KERNEL", "").strip()- if env_path:- p = os.path.abspath(env_path)- if os.path.isfile(p):- return p- print(f" [!] RAMDISK_BASE_KERNEL set but not found: {p}")-- project_root = os.path.abspath(os.path.join(_SCRIPT_DIR, ".."))- patterns = [- os.path.join(project_root, "ipsws", "PCC-CloudOS*", "kernelcache.research.vphone600"),- os.path.join(project_root, "ipsws", "*CloudOS*", "kernelcache.research.vphone600"),- ]- for pattern in patterns:- matches = sorted(glob.glob(pattern))- if matches:- return matches[0]- return None---def derive_ramdisk_kernel_source(kc_src, temp_dir):- """Get source kernel for krnl.ramdisk.img4 entirely within ramdisk_build flow.-- Priority:- 1) Existing legacy snapshot next to restore kernel (`*.ramdisk`)- 2) Derive from pristine CloudOS kernel by applying base KernelPatcher- """- legacy_snapshot = f"{kc_src}{RAMDISK_KERNEL_SUFFIX}"- if os.path.isfile(legacy_snapshot):- print(f" found legacy ramdisk kernel snapshot: {legacy_snapshot}")- return legacy_snapshot-- pristine = _find_pristine_cloudos_kernel()- if not pristine:- print(" [!] pristine CloudOS kernel not found; skipping ramdisk-specific kernel image")- return None-- print(f" deriving ramdisk kernel from pristine source: {pristine}")- out_path = os.path.join(temp_dir, f"kernelcache.research.vphone600{RAMDISK_KERNEL_SUFFIX}")- run_swift_patch_component("kernel-base", pristine, out_path)- print(" [+] base kernel patches applied for ramdisk variant")- return out_path---# ══════════════════════════════════════════════════════════════════-# iBEC boot-args patching-# ══════════════════════════════════════════════════════════════════---def patch_ibec_bootargs(data):- """Replace normal boot-args with ramdisk boot-args in already-patched iBEC.-- Finds the boot-args string written by the Swift firmware pipeline- and overwrites it in-place. No hardcoded offsets needed — the ADRP+ADD- instructions already point to the string location.- """- off = data.find(DEFAULT_IBEC_BOOT_ARGS)- if off < 0:- print(f" [-] boot-args: existing string not found ({DEFAULT_IBEC_BOOT_ARGS.decode()!r})")- return False-- args = RAMDISK_BOOT_ARGS + b"\x00"- data[off : off + len(args)] = args-- # Zero out any leftover from the previous string- end = off + len(args)- while end < len(data) and data[end] != 0:- data[end] = 0- end += 1-- print(f' boot-args -> "{RAMDISK_BOOT_ARGS.decode()}" at 0x{off:X}')- return True---def patch_restored_external_usbmux_label(mountpoint):- """Patch restored_external USBMux serial label when RAMDISK_UDID is provided."""- target_udid = os.environ.get("RAMDISK_UDID", "").strip()- if not target_udid:- print(" [*] RAMDISK_UDID not set; keeping default restored_external USBMux label")- return-- try:- target_bytes = target_udid.encode("ascii")- except UnicodeEncodeError:- print(f"[-] RAMDISK_UDID must be ASCII, got: {target_udid!r}")- sys.exit(1)-- marker_len = len(RESTORED_EXTERNAL_SERIAL_MARKER)- if len(target_bytes) > marker_len:- print(f"[-] RAMDISK_UDID too long for restored_external label ({len(target_bytes)} > {marker_len})")- print(f" RAMDISK_UDID={target_udid}")- sys.exit(1)-- restored_external = os.path.join(mountpoint, RESTORED_EXTERNAL_PATH)- if not os.path.isfile(restored_external):- print(f"[-] Missing restored_external for USBMux label patch: {restored_external}")- sys.exit(1)-- with open(restored_external, "rb") as f:- data = f.read()-- off = data.find(RESTORED_EXTERNAL_SERIAL_MARKER)- if off < 0:- print("[-] Could not find default USBMux serial marker in restored_external")- sys.exit(1)-- if data.find(RESTORED_EXTERNAL_SERIAL_MARKER, off + 1) >= 0:- print("[!] Multiple USBMux serial markers found in restored_external; patching first occurrence")-- replacement = target_bytes + (b"\x00" * (marker_len - len(target_bytes)))- patched = data[:off] + replacement + data[off + marker_len :]-- with open(restored_external, "wb") as f:- f.write(patched)-- print(f" [+] Patched restored_external USBMux label to: {target_udid}")---# ══════════════════════════════════════════════════════════════════-# Ramdisk DMG building-# ══════════════════════════════════════════════════════════════════---def build_ramdisk(restore_dir, im4m_path, vm_dir, input_dir, output_dir, temp_dir):- """Build custom SSH ramdisk from restore DMG."""- # Read RestoreRamDisk path dynamically from BuildManifest.plist- bm_path = os.path.join(restore_dir, "BuildManifest.plist")- with open(bm_path, "rb") as f:- bm = plistlib.load(f)- ramdisk_rel = bm["BuildIdentities"][0]["Manifest"]["RestoreRamDisk"]["Info"]["Path"]- ramdisk_src = os.path.join(restore_dir, ramdisk_rel)- mountpoint = os.path.join(vm_dir, "SSHRD")- ramdisk_raw = os.path.join(temp_dir, "ramdisk.raw.dmg")- ramdisk_custom = os.path.join(temp_dir, "ramdisk1.dmg")- gtar_bin = shutil.which("gtar")- ldid_bin = shutil.which("ldid")- tc_bin = shutil.which("trustcache")-- # Extract base ramdisk- print(" Extracting base ramdisk...")- run(- ["pyimg4", "im4p", "extract", "-i", ramdisk_src, "-o", ramdisk_raw],- capture_output=True,- )-- ensure_path_within_vm(mountpoint, vm_dir, "Ramdisk mountpoint")- os.makedirs(mountpoint, exist_ok=True)- if os.path.exists(ramdisk_custom):- os.remove(ramdisk_custom)-- try:- # Mount, create expanded copy- print(" Mounting base ramdisk...")- run_sudo(- [- "hdiutil",- "attach",- "-mountpoint",- mountpoint,- ramdisk_raw,- "-nobrowse",- "-owners",- "off",- ]- )-- print(" Creating expanded ramdisk (254 MB)...")- run_sudo(- [- "hdiutil",- "create",- "-size",- "254m",- "-imagekey",- "diskimage-class=CRawDiskImage",- "-format",- "UDZO",- "-fs",- "APFS",- "-layout",- "NONE",- "-srcfolder",- mountpoint,- "-copyuid",- "root",- ramdisk_custom,- ]- )- detach_mountpoint(mountpoint, required=True)-- # Mount expanded, inject SSH- print(" Mounting expanded ramdisk...")- run_sudo(- [- "hdiutil",- "attach",- "-mountpoint",- mountpoint,- ramdisk_custom,- "-nobrowse",- "-owners",- "off",- ]- )-- print(" Injecting SSH tools...")- ssh_tar = os.path.join(input_dir, "ssh.tar.gz")- run_sudo(- [gtar_bin, "-x", "--no-overwrite-dir", "-f", ssh_tar, "-C", mountpoint]- )- patch_restored_external_usbmux_label(mountpoint)-- # Remove unnecessary files- for rel_path in RAMDISK_REMOVE:- full = os.path.join(mountpoint, rel_path)- if os.path.exists(full):- if os.path.isdir(full):- shutil.rmtree(full)- else:- os.remove(full)-- # Re-sign Mach-O binaries- print(" Re-signing Mach-O binaries...")- signcert = os.path.join(input_dir, "signcert.p12")-- for pattern in SIGN_DIRS:- for path in glob.glob(os.path.join(mountpoint, pattern)):- if os.path.isfile(path) and not os.path.islink(path):- if (- "Mach-O"- in subprocess.run(- ["file", path],- capture_output=True,- text=True,- ).stdout- ):- subprocess.run(- [ldid_bin, "-S", "-M", f"-K{signcert}", path],- capture_output=True,- )-- # Fix sftp-server entitlements- sftp_ents = os.path.join(input_dir, "sftp_server_ents.plist")- sftp_server = os.path.join(mountpoint, "usr/libexec/sftp-server")- if os.path.exists(sftp_server):- run([ldid_bin, f"-S{sftp_ents}", "-M", f"-K{signcert}", sftp_server])-- # Build trustcache- print(" Building trustcache...")- tc_raw = os.path.join(temp_dir, "sshrd.raw.tc")- tc_im4p = os.path.join(temp_dir, "trustcache.im4p")-- run([tc_bin, "create", tc_raw, mountpoint])- run(- ["pyimg4", "im4p", "create", "-i", tc_raw, "-o", tc_im4p, "-f", "rtsc"],- capture_output=True,- )- sign_img4(- tc_im4p,- os.path.join(output_dir, "trustcache.img4"),- im4m_path,- )- print(f" [+] trustcache.img4")-- finally:- detach_mountpoint(mountpoint)-- # Shrink and sign ramdisk- run_sudo(["hdiutil", "resize", "-sectors", "min", ramdisk_custom])-- print(" Signing ramdisk...")- rd_im4p = os.path.join(temp_dir, "ramdisk.im4p")- run(- ["pyimg4", "im4p", "create", "-i", ramdisk_custom, "-o", rd_im4p, "-f", "rdsk"],- capture_output=True,- )- sign_img4(- rd_im4p,- os.path.join(output_dir, "ramdisk.img4"),- im4m_path,- )- print(f" [+] ramdisk.img4")---# ══════════════════════════════════════════════════════════════════-# Main-# ══════════════════════════════════════════════════════════════════---def main():- vm_dir = os.path.abspath(sys.argv[1] if len(sys.argv) > 1 else os.getcwd())-- if not os.path.isdir(vm_dir):- print(f"[-] Not a directory: {vm_dir}")- sys.exit(1)-- # Find SHSH- shsh_path = find_shsh(vm_dir)- if not shsh_path:- print(f"[-] No SHSH blob found in {shsh_dir}/")- print(" Place your .shsh file in the shsh/ directory.")- sys.exit(1)-- # Find restore directory- restore_dir = find_restore_dir(vm_dir)- if not restore_dir:- print(f"[-] No *Restore* directory found in {vm_dir}")- sys.exit(1)-- # Check host tools- check_prerequisites()-- # Setup input resources (copy from CFW if needed)- print(f"[*] Setting up {INPUT_DIR}/...")- input_dir = setup_input(vm_dir)-- # Create temp and output directories- temp_dir = os.path.join(vm_dir, TEMP_DIR)- output_dir = os.path.join(vm_dir, OUTPUT_DIR)- ensure_path_within_vm(temp_dir, vm_dir, "Temp directory")- ensure_path_within_vm(output_dir, vm_dir, "Output directory")- for d in (temp_dir, output_dir):- if os.path.exists(d):- shutil.rmtree(d)- os.makedirs(d)-- print(f"[*] VM directory: {vm_dir}")- print(f"[*] Restore directory: {restore_dir}")- print(f"[*] SHSH blob: {shsh_path}")-- # Extract IM4M from SHSH- im4m_path = os.path.join(temp_dir, "vphone.im4m")- print(f"\n[*] Extracting IM4M from SHSH...")- extract_im4m(shsh_path, im4m_path)-- # ── 1. iBSS (already patched by patch_firmware.py) ───────────- print(f"\n{'=' * 60}")- print(f" 1. iBSS (already patched — extract & sign)")- print(f"{'=' * 60}")- ibss_src = find_file(- restore_dir,- [- "Firmware/dfu/iBSS.vresearch101.RELEASE.im4p",- ],- "iBSS",- )- ibss_raw = os.path.join(temp_dir, "iBSS.raw")- ibss_im4p = os.path.join(temp_dir, "iBSS.im4p")- im4p_obj, data, _ = extract_to_raw(ibss_src, ibss_raw)- create_im4p_uncompressed(data, im4p_obj.fourcc, im4p_obj.description, ibss_im4p)- sign_img4(- ibss_im4p,- os.path.join(output_dir, "iBSS.vresearch101.RELEASE.img4"),- im4m_path,- )- print(f" [+] iBSS.vresearch101.RELEASE.img4")-- # ── 2. iBEC (already patched — just fix boot-args for ramdisk)- print(f"\n{'=' * 60}")- print(f" 2. iBEC (patch boot-args for ramdisk)")- print(f"{'=' * 60}")- ibec_src = find_file(- restore_dir,- [- "Firmware/dfu/iBEC.vresearch101.RELEASE.im4p",- ],- "iBEC",- )- ibec_raw = os.path.join(temp_dir, "iBEC.raw")- ibec_im4p = os.path.join(temp_dir, "iBEC.im4p")- im4p_obj, data, _ = extract_to_raw(ibec_src, ibec_raw)- patch_ibec_bootargs(data)- create_im4p_uncompressed(data, im4p_obj.fourcc, im4p_obj.description, ibec_im4p)- sign_img4(- ibec_im4p,- os.path.join(output_dir, "iBEC.vresearch101.RELEASE.img4"),- im4m_path,- )- print(f" [+] iBEC.vresearch101.RELEASE.img4")-- # ── 3. SPTM (sign only) ─────────────────────────────────────- print(f"\n{'=' * 60}")- print(f" 3. SPTM (sign only)")- print(f"{'=' * 60}")- sptm_src = find_file(- restore_dir,- [- "Firmware/sptm.vresearch1.release.im4p",- ],- "SPTM",- )- sign_img4(- sptm_src,- os.path.join(output_dir, "sptm.vresearch1.release.img4"),- im4m_path,- tag="sptm",- )- print(f" [+] sptm.vresearch1.release.img4")-- # ── 4. DeviceTree (sign only) ────────────────────────────────- print(f"\n{'=' * 60}")- print(f" 4. DeviceTree (sign only)")- print(f"{'=' * 60}")- dt_src = find_file(- restore_dir,- [- "Firmware/all_flash/DeviceTree.vphone600ap.im4p",- ],- "DeviceTree",- )- sign_img4(- dt_src,- os.path.join(output_dir, "DeviceTree.vphone600ap.img4"),- im4m_path,- tag="rdtr",- )- print(f" [+] DeviceTree.vphone600ap.img4")-- # ── 5. SEP (sign only) ───────────────────────────────────────- print(f"\n{'=' * 60}")- print(f" 5. SEP (sign only)")- print(f"{'=' * 60}")- sep_src = find_file(- restore_dir,- [- "Firmware/all_flash/sep-firmware.vresearch101.RELEASE.im4p",- ],- "SEP",- )- sign_img4(- sep_src,- os.path.join(output_dir, "sep-firmware.vresearch101.RELEASE.img4"),- im4m_path,- tag="rsep",- )- print(f" [+] sep-firmware.vresearch101.RELEASE.img4")-- # ── 6. TXM (release variant — needs patching) ────────────────- print(f"\n{'=' * 60}")- print(f" 6. TXM (patch release variant)")- print(f"{'=' * 60}")- txm_src = find_file(- restore_dir,- [- "Firmware/txm.iphoneos.release.im4p",- ],- "TXM",- )- txm_raw = os.path.join(temp_dir, "txm.raw")- txm_patched_raw = os.path.join(temp_dir, "txm.patched.raw")- im4p_obj, data, _, original_raw = load_firmware(txm_src)- with open(txm_raw, "wb") as f:- f.write(bytes(data))- print(f" source: {txm_src}")- print(f" format: IM4P, {len(data)} bytes")- run_swift_patch_component("txm", txm_src, txm_patched_raw)- with open(txm_patched_raw, "rb") as f:- patched_txm = f.read()- txm_im4p = os.path.join(temp_dir, "txm.im4p")- _save_im4p_with_payp(txm_im4p, TXM_FOURCC, patched_txm, original_raw)- sign_img4(- txm_im4p, os.path.join(output_dir, "txm.img4"), im4m_path- )- print(f" [+] txm.img4")-- # ── 7. Kernelcache (already patched — repack with rkrn) ──────- print(f"\n{'=' * 60}")- print(f" 7. Kernelcache (already patched — repack as rkrn)")- print(f"{'=' * 60}")- kc_src = find_file(- restore_dir,- [- "kernelcache.research.vphone600",- ],- "kernelcache",- )- kc_ramdisk_src = derive_ramdisk_kernel_source(kc_src, temp_dir)- if kc_ramdisk_src:- print(f" building {RAMDISK_KERNEL_IMG4} from ramdisk kernel source")- build_kernel_img4(- kc_ramdisk_src,- output_dir,- temp_dir,- im4m_path,- RAMDISK_KERNEL_IMG4,- "kcache_ramdisk",- )- print(" building krnl.img4 from restore kernel")-- build_kernel_img4(- kc_src,- output_dir,- temp_dir,- im4m_path,- "krnl.img4",- "kcache",- )-- # ── 8. Ramdisk + Trustcache ──────────────────────────────────- print(f"\n{'=' * 60}")- print(f" 8. Ramdisk + Trustcache")- print(f"{'=' * 60}")- build_ramdisk(restore_dir, im4m_path, vm_dir, input_dir, output_dir, temp_dir)-- # ── Cleanup ──────────────────────────────────────────────────- print(f"\n[*] Cleaning up {TEMP_DIR}/...")- shutil.rmtree(temp_dir, ignore_errors=True)- sshrd_dir = os.path.join(vm_dir, "SSHRD")- if os.path.exists(sshrd_dir):- shutil.rmtree(sshrd_dir, ignore_errors=True)-- # ── Summary ──────────────────────────────────────────────────- print(f"\n{'=' * 60}")- print(f" Ramdisk build complete!")- print(f" Output: {output_dir}/")- print(f"{'=' * 60}")- for f in sorted(os.listdir(output_dir)):- size = os.path.getsize(os.path.join(output_dir, f))- print(f" {f:45s} {size:>10,} bytes")---if __name__ == "__main__":- main()diff --git a/scripts/ramdisk_send.sh b/scripts/ramdisk_send.shdeleted file mode 100755index 76a97552..00000000--- a/scripts/ramdisk_send.sh+++ /dev/null@@ -1,55 +0,0 @@-#!/bin/zsh-# ramdisk_send.sh — Send signed ramdisk components to device via pymobiledevice3.-#-# Usage: ./ramdisk_send.sh [ramdisk_dir]-#-# Expects device in DFU mode. Loads iBSS/iBEC, then boots with-# SPTM, TXM, trustcache, ramdisk, device tree, SEP, and kernel.-set -euo pipefail--SCRIPT_DIR="$(cd "$(dirname "$0")" && pwd)"-PMD3_BRIDGE="${PMD3_BRIDGE:-${SCRIPT_DIR}/pymobiledevice3_bridge.py}"-PYTHON="${PYTHON:-python3}"-IRECOVERY_ECID="${IRECOVERY_ECID:-}"-RAMDISK_UDID="${RAMDISK_UDID:-${RESTORE_UDID:-}}"-RAMDISK_DIR="${1:-Ramdisk}"--if [[ -n "$IRECOVERY_ECID" ]]; then- IRECOVERY_ECID="${IRECOVERY_ECID#0x}"- IRECOVERY_ECID="${IRECOVERY_ECID#0X}"- [[ "$IRECOVERY_ECID" =~ ^[0-9A-Fa-f]{1,16}$ ]] || {- echo "[-] Invalid IRECOVERY_ECID: ${IRECOVERY_ECID}"- exit 1- }- IRECOVERY_ECID="0x${IRECOVERY_ECID:u}"- echo "[*] Using ECID selector for ramdisk send: ${IRECOVERY_ECID}"-fi--echo "[*] Identity context for ramdisk_send:"-if [[ -n "$RAMDISK_UDID" ]]; then- echo " UDID: ${RAMDISK_UDID}"-else- echo " UDID: <unset>"-fi-if [[ -n "$IRECOVERY_ECID" ]]; then- echo " ECID: ${IRECOVERY_ECID}"-else- echo " ECID: <unset>"-fi--if [[ ! -d "$RAMDISK_DIR" ]]; then- echo "[-] Ramdisk directory not found: $RAMDISK_DIR"- echo " Run 'make ramdisk_build' first."- exit 1-fi--if [[ ! -f "$PMD3_BRIDGE" ]]; then- echo "[-] pymobiledevice3 bridge script not found: $PMD3_BRIDGE"- exit 1-fi-echo "[*] Using pymobiledevice3 backend for ramdisk send"-cmd=("$PYTHON" "$PMD3_BRIDGE" ramdisk-send --ramdisk-dir "$RAMDISK_DIR")-if [[ -n "$IRECOVERY_ECID" ]]; then- cmd+=(--ecid "$IRECOVERY_ECID")-fi-"${cmd[@]}"diff --git a/scripts/setup_machine.sh b/scripts/setup_machine.shindex 1b4c560b..c3307e6f 100755--- a/scripts/setup_machine.sh+++ b/scripts/setup_machine.sh@@ -5,9 +5,8 @@# 1) Host deps + project setup/build# 2) vm_new + fw_prepare + fw_patch (or fw_patch_dev/ fw_patch_jb with --dev/--jb)# 3) DFU restore (boot_dfu + restore_get_shsh + restore)-# 4) CFW install — default: ramdisk-free host-mount install + offline snapshot-# flip (cfw_install_host, VM off). Legacy ramdisk path (boot_dfu +-# ramdisk_build/send + iproxy + cfw_install*) is opt-in via USE_RAMDISK_CFW=1.+# 4) CFW install — host-mount install + offline snapshot flip+# (cfw_install_host, VM off)# 5) First boot launch (`make boot`) with printed in-guest commandsset -euo pipefail@@ -19,11 +18,9 @@ cd "$PROJECT_ROOT"LOG_DIR="${PROJECT_ROOT}/setup_logs"DFU_LOG="${LOG_DIR}/boot_dfu.log"-IPROXY_LOG=""BOOT_LOG="${LOG_DIR}/boot.log"DFU_PID=""-IPROXY_PID=""BOOT_PID=""BOOT_FIFO=""BOOT_FIFO_FD=""@@ -34,23 +31,9 @@ VM_DIR_ABS="${VM_DIR:A}"AUTO_KILL_VM_LOCKS="${AUTO_KILL_VM_LOCKS:-1}"POST_RESTORE_KILL_DELAY="${POST_RESTORE_KILL_DELAY:-30}"POST_KILL_SETTLE_DELAY="${POST_KILL_SETTLE_DELAY:-5}"-RAMDISK_SSH_TIMEOUT="${RAMDISK_SSH_TIMEOUT:-60}"-RAMDISK_SSH_INTERVAL="${RAMDISK_SSH_INTERVAL:-2}"-RAMDISK_SSH_PORT="${RAMDISK_SSH_PORT:-}"-RAMDISK_SSH_USER="${RAMDISK_SSH_USER:-root}"-RAMDISK_SSH_PASS="${RAMDISK_SSH_PASS:-alpine}"-IPROXY_UDID="${IPROXY_UDID:-}"-IPROXY_DEVICE_WAIT_TIMEOUT="${IPROXY_DEVICE_WAIT_TIMEOUT:-90}"-IPROXY_DEVICE_WAIT_INTERVAL="${IPROXY_DEVICE_WAIT_INTERVAL:-1}"-RAMDISK_SSH_PORT_EXPLICIT=0-if [[ -n "$RAMDISK_SSH_PORT" ]]; then- RAMDISK_SSH_PORT_EXPLICIT=1-fiDEVICE_UDID=""DEVICE_ECID=""-IPROXY_TARGET_UDID=""-IPROXY_RESOLVE_REASON=""BOOT_ANALYSIS_TIMEOUT="${BOOT_ANALYSIS_TIMEOUT:-300}"BOOT_PROMPT_FALLBACK_TIMEOUT="${BOOT_PROMPT_FALLBACK_TIMEOUT:-60}"BOOT_BASH_PROMPT_REGEX="${BOOT_BASH_PROMPT_REGEX:-bash-[0-9]+(\.[0-9]+)+#|:/[^ ]* root#}"@@ -148,174 +131,6 @@ load_device_identity() {echo "[+] Device identity loaded: UDID=${DEVICE_UDID} ECID=0x${DEVICE_ECID}"}-list_usbmux_udids() {- local pmd3_python- pmd3_python="$(find_python_for_pmd3 || true)"- [[ -x "$pmd3_python" ]] || die "pymobiledevice3 python runtime not found (run: make setup_tools)"- [[ -f "$PMD3_BRIDGE" ]] || die "Missing bridge script: $PMD3_BRIDGE"- "$pmd3_python" "$PMD3_BRIDGE" usbmux-list 2>/dev/null | tr -d '\r' | sed '/^[[:space:]]*$/d'-}--print_usbmux_udids() {- local -a udids- local udid- udids=(${(@f)$(list_usbmux_udids)})-- if (( ${#udids[@]} == 0 )); then- echo " (none)"- return- fi-- for udid in "${udids[@]}"; do- echo " - ${udid}"- done-}--try_resolve_iproxy_target_udid() {- local -a usbmux_udids ecid_matches- local udid- local ecid_lower-- IPROXY_TARGET_UDID=""- IPROXY_RESOLVE_REASON=""-- if [[ -n "$IPROXY_UDID" ]]; then- IPROXY_TARGET_UDID="$IPROXY_UDID"- IPROXY_RESOLVE_REASON="override"- return 0- fi-- usbmux_udids=(${(@f)$(list_usbmux_udids)})- if (( ${#usbmux_udids[@]} == 0 )); then- IPROXY_RESOLVE_REASON="none"- return 1- fi-- for udid in "${usbmux_udids[@]}"; do- if [[ "$udid" == "$DEVICE_UDID" ]]; then- IPROXY_TARGET_UDID="$udid"- IPROXY_RESOLVE_REASON="restore_match"- return 0- fi- done-- ecid_lower="${DEVICE_ECID:l}"- ecid_matches=()- for udid in "${usbmux_udids[@]}"; do- if [[ "${udid:l}" == *"${ecid_lower}"* ]]; then- ecid_matches+=("$udid")- fi- done-- if (( ${#ecid_matches[@]} == 1 )); then- IPROXY_TARGET_UDID="${ecid_matches[1]}"- IPROXY_RESOLVE_REASON="ecid_match"- return 0- fi-- if (( ${#usbmux_udids[@]} == 1 )); then- IPROXY_RESOLVE_REASON="single_mismatch"- return 3- fi-- IPROXY_RESOLVE_REASON="ambiguous"- return 2-}--wait_for_iproxy_target_udid() {- local timeout interval waited rc-- timeout="$IPROXY_DEVICE_WAIT_TIMEOUT"- interval="$IPROXY_DEVICE_WAIT_INTERVAL"- waited=0-- [[ "$timeout" == <-> ]] || die "IPROXY_DEVICE_WAIT_TIMEOUT must be an integer (seconds)"- [[ "$interval" == <-> ]] || die "IPROXY_DEVICE_WAIT_INTERVAL must be an integer (seconds)"- (( timeout > 0 )) || die "IPROXY_DEVICE_WAIT_TIMEOUT must be > 0"- (( interval > 0 )) || die "IPROXY_DEVICE_WAIT_INTERVAL must be > 0"-- echo "[*] Resolving iproxy target UDID (timeout=${timeout}s)..."- while (( waited < timeout )); do- if try_resolve_iproxy_target_udid; then- echo "[*] USBMux IDs currently visible:"- print_usbmux_udids- case "$IPROXY_RESOLVE_REASON" in- override)- echo "[*] Using explicit IPROXY_UDID override: ${IPROXY_TARGET_UDID}"- ;;- restore_match)- echo "[+] iproxy target UDID matched restore UDID: ${IPROXY_TARGET_UDID}"- ;;- ecid_match)- echo "[+] iproxy target UDID matched ECID substring: ${IPROXY_TARGET_UDID}"- ;;- esac- return- fi- rc=$?-- if (( waited == 0 || waited % 5 == 0 )); then- case "$rc" in- 2)- echo " waiting for USBMux disambiguation... ${waited}s elapsed"- ;;- 3)- echo " waiting for restore UDID/ECID match (strict mode)... ${waited}s elapsed"- ;;- *)- echo " waiting for USBMux device... ${waited}s elapsed"- ;;- esac- fi-- sleep "$interval"- (( waited += interval ))- done-- echo "[-] Timed out resolving iproxy target UDID after ${timeout}s."- echo "[-] USBMux IDs currently visible:"- print_usbmux_udids- if [[ "$IPROXY_RESOLVE_REASON" == "single_mismatch" ]]; then- die "Only non-matching USBMux device was visible. Strict identity isolation is enabled; wait for restore UDID/ECID or set IPROXY_UDID explicitly."- fi- if [[ "$IPROXY_RESOLVE_REASON" == "ambiguous" ]]; then- die "Multiple USBMux devices detected and none uniquely matched restore UDID/ECID. Set IPROXY_UDID explicitly."- fi- die "No USBMux devices detected for iproxy. Ensure ramdisk has fully booted USB stack."-}--port_is_listening() {- local port="$1"- lsof -n -t -iTCP:"$port" -sTCP:LISTEN >/dev/null 2>&1-}--pick_random_ssh_port() {- local attempt port- for attempt in {1..200}; do- port=$((20000 + (RANDOM % 40000)))- if ! port_is_listening "$port"; then- echo "$port"- return 0- fi- done- return 1-}--choose_ramdisk_ssh_port() {- if [[ -n "$RAMDISK_SSH_PORT" ]]; then- [[ "$RAMDISK_SSH_PORT" == <-> ]] || die "RAMDISK_SSH_PORT must be an integer"- (( RAMDISK_SSH_PORT >= 1 && RAMDISK_SSH_PORT <= 65535 )) \- || die "RAMDISK_SSH_PORT out of range: ${RAMDISK_SSH_PORT}"- if port_is_listening "$RAMDISK_SSH_PORT"; then- die "RAMDISK_SSH_PORT ${RAMDISK_SSH_PORT} is already in use"- fi- return- fi-- RAMDISK_SSH_PORT="$(pick_random_ssh_port)" \- || die "Failed to allocate a random local SSH forward port"-}-parse_bool() {local raw="${1:-0}"# zsh `${var:l}` lowercases value for tolerant bool parsing.@@ -491,11 +306,6 @@ cleanup() {BOOT_FIFO=""fi- if [[ -n "$IPROXY_PID" ]]; then- stop_process_tree "$IPROXY_PID"- IPROXY_PID=""- fi-if [[ -n "$DFU_PID" ]]; thenstop_process_tree "$DFU_PID"DFU_PID=""@@ -841,120 +651,6 @@ wait_for_recovery() {exit 1}-start_iproxy() {- [[ -n "$DEVICE_UDID" ]] || die "Device UDID is empty; cannot resolve iproxy target"-- choose_ramdisk_ssh_port- wait_for_iproxy_target_udid-- if port_is_listening "$RAMDISK_SSH_PORT"; then- if [[ "$RAMDISK_SSH_PORT_EXPLICIT" == "1" ]]; then- die "RAMDISK_SSH_PORT ${RAMDISK_SSH_PORT} is already in use"- fi- RAMDISK_SSH_PORT="$(pick_random_ssh_port)" \- || die "Failed to allocate a free random local SSH forward port"- fi-- IPROXY_LOG="${LOG_DIR}/iproxy_${RAMDISK_SSH_PORT}.log"- mkdir -p "$LOG_DIR"- : > "$IPROXY_LOG"-- local pmd3_python- pmd3_python="$(find_python_for_pmd3 || true)"- [[ -x "$pmd3_python" ]] || die "pymobiledevice3 python runtime not found (run: make setup_tools)"- echo "[*] Starting pymobiledevice3 usbmux forward ${RAMDISK_SSH_PORT} -> 22 (target_udid=${IPROXY_TARGET_UDID}, restore_udid=${DEVICE_UDID}, ecid=0x${DEVICE_ECID})..."- ("$pmd3_python" -m pymobiledevice3 usbmux forward --serial "$IPROXY_TARGET_UDID" "$RAMDISK_SSH_PORT" 22 >"$IPROXY_LOG" 2>&1) &- IPROXY_PID=$!-- sleep 1- if ! kill -0 "$IPROXY_PID" 2>/dev/null; then- echo "[-] iproxy exited early. Log:"- tail -n 40 "$IPROXY_LOG" || true- exit 1- fi-- echo "[+] iproxy running (pid=$IPROXY_PID, log=$IPROXY_LOG)"-}--wait_for_ramdisk_ssh() {- local sshpass_bin- local waited=0-- [[ "$RAMDISK_SSH_TIMEOUT" == <-> ]] || die "RAMDISK_SSH_TIMEOUT must be an integer (seconds)"- [[ "$RAMDISK_SSH_INTERVAL" == <-> ]] || die "RAMDISK_SSH_INTERVAL must be an integer (seconds)"- (( RAMDISK_SSH_TIMEOUT > 0 )) || die "RAMDISK_SSH_TIMEOUT must be > 0"- (( RAMDISK_SSH_INTERVAL > 0 )) || die "RAMDISK_SSH_INTERVAL must be > 0"-- sshpass_bin="$(command -v sshpass || true)"- [[ -x "$sshpass_bin" ]] || die "sshpass not found (run: make setup_tools)"-- echo "[*] Waiting for ramdisk SSH on ${RAMDISK_SSH_USER}@127.0.0.1:${RAMDISK_SSH_PORT} (timeout=${RAMDISK_SSH_TIMEOUT}s)..."- while (( waited < RAMDISK_SSH_TIMEOUT )); do- if [[ -n "$IPROXY_PID" ]] && ! kill -0 "$IPROXY_PID" 2>/dev/null; then- echo "[-] iproxy process exited while waiting for ramdisk SSH."- if [[ -n "$IPROXY_LOG" ]]; then- echo "[-] iproxy log tail:"- tail -n 40 "$IPROXY_LOG" 2>/dev/null || true- fi- die "iproxy exited before ramdisk SSH became ready."- fi-- if [[ -f "$DFU_LOG" ]] && grep -Eiq 'panic|kernel panic|stackshot succeeded|panic\.apple\.com' "$DFU_LOG"; then- echo "[-] Detected panic markers in boot_dfu log while waiting for ramdisk SSH."- echo "[-] boot_dfu log tail:"- tail -n 80 "$DFU_LOG" 2>/dev/null || true- die "Ramdisk boot appears to have panicked before SSH became ready."- fi-- if [[ -n "$DFU_PID" ]] && ! kill -0 "$DFU_PID" 2>/dev/null; then- echo "[-] boot_dfu process exited while waiting for ramdisk SSH."- echo "[-] boot_dfu log tail:"- tail -n 80 "$DFU_LOG" 2>/dev/null || true- die "DFU boot exited before ramdisk SSH became ready."- fi-- if "$sshpass_bin" -p "$RAMDISK_SSH_PASS" ssh \- -o StrictHostKeyChecking=no \- -o UserKnownHostsFile=/dev/null \- -o PreferredAuthentications=password \- -o ConnectTimeout=5 \- -q \- -p "$RAMDISK_SSH_PORT" \- "${RAMDISK_SSH_USER}@127.0.0.1" "echo ready" >/dev/null 2>&1- then- echo "[+] Ramdisk SSH is ready"- return- fi-- if (( waited == 0 || waited % 10 == 0 )); then- echo " waiting... ${waited}s elapsed"- fi-- sleep "$RAMDISK_SSH_INTERVAL"- (( waited += RAMDISK_SSH_INTERVAL ))- done-- echo "[-] Timed out waiting for ramdisk SSH readiness."- echo "[-] Identity context: restore_udid=${DEVICE_UDID}, ecid=0x${DEVICE_ECID}, iproxy_target_udid=${IPROXY_TARGET_UDID}"- echo "[-] USBMux IDs at timeout:"- print_usbmux_udids- if [[ -n "$IPROXY_LOG" ]]; then- echo "[-] iproxy log tail:"- tail -n 40 "$IPROXY_LOG" 2>/dev/null || true- fi- echo "[-] boot_dfu log tail:"- tail -n 60 "$DFU_LOG" 2>/dev/null || true- die "Ramdisk SSH did not become ready in ${RAMDISK_SSH_TIMEOUT}s."-}--stop_iproxy() {- if [[ -n "$IPROXY_PID" ]] && kill -0 "$IPROXY_PID" 2>/dev/null; then- echo "[*] Stopping iproxy (pid=$IPROXY_PID)..."- stop_process_tree "$IPROXY_PID"- fi- IPROXY_PID=""-}-parse_args() {local argfor arg in "$@"; do@@ -1019,8 +715,7 @@ main() {setup_sudo_noninteractivelocal fw_patch_target="fw_patch"- local cfw_install_target="cfw_install"- local cfw_variant="regular" # variant for the ramdisk-free `cfw_install_host`+ local cfw_variant="regular" # variant for `cfw_install_host`local mode_label="base"if (( JB_MODE + DEV_MODE + EXP_MODE + LESS_MODE > 1 )); then@@ -1029,22 +724,18 @@ main() {if [[ "$JB_MODE" -eq 1 ]]; thenfw_patch_target="fw_patch_jb"- cfw_install_target="cfw_install_jb"cfw_variant="jb"mode_label="jailbreak"elif [[ "$DEV_MODE" -eq 1 ]]; thenfw_patch_target="fw_patch_dev"- cfw_install_target="cfw_install_dev"cfw_variant="dev"mode_label="dev"elif [[ "$EXP_MODE" -eq 1 ]]; thenfw_patch_target="fw_patch_exp"- cfw_install_target="cfw_install_exp"cfw_variant="exp"mode_label="experimental"elif [[ "$LESS_MODE" -eq 1 ]]; thenfw_patch_target="fw_patch_less"- cfw_install_target=""cfw_variant=""mode_label="less"fi@@ -1091,32 +782,14 @@ main() {echo "[*] Waiting ${POST_KILL_SETTLE_DELAY}s for cleanup before CFW install..."sleep "$POST_KILL_SETTLE_DELAY"- if [[ "${USE_RAMDISK_CFW:-0}" == "1" ]]; then- # ── Legacy ramdisk CFW install (opt-in via USE_RAMDISK_CFW=1) ──- echo ""- echo "=== Ramdisk + CFW phase (legacy, USE_RAMDISK_CFW=1) ==="- start_boot_dfu- load_device_identity- wait_for_recovery- run_make "Ramdisk" ramdisk_build RAMDISK_UDID="$DEVICE_UDID"- echo "[*] Ramdisk identity context: restore_udid=${DEVICE_UDID} ecid=0x${DEVICE_ECID}"- run_make "Ramdisk" ramdisk_send IRECOVERY_ECID="0x$DEVICE_ECID" RAMDISK_UDID="$DEVICE_UDID"- start_iproxy- wait_for_ramdisk_ssh- run_make "CFW install" "$cfw_install_target" SSH_PORT="$RAMDISK_SSH_PORT"- stop_boot_dfu- stop_iproxy- else- # ── Default: ramdisk-free host-mount CFW install + offline snapshot flip.- # The VM is off after the restore phase, so we attach Disk.img on the- # host, place all CFW files, and rename the boot snapshot offline — no- # DFU/ramdisk_send/iproxy/SSH. cfw_install_host re-execs under sudo- # (SUDO_ASKPASS from setup_sudo_noninteractive when SUDO_PASSWORD is set).- echo ""- echo "=== CFW install (host-mount, ramdisk-free) ==="- check_vm_storage_locks- run_make "CFW install" cfw_install_host VARIANT="$cfw_variant" SPOOF_BUILD="${SPOOF_BUILD:-}"- fi+ # Host-mount CFW install + offline snapshot flip. The VM is off after the+ # restore phase, so we attach Disk.img on the host, place all CFW files, and+ # rename the boot snapshot offline. cfw_install_host re-execs under sudo+ # (SUDO_ASKPASS from setup_sudo_noninteractive when SUDO_PASSWORD is set).+ echo ""+ echo "=== CFW install (host-mount) ==="+ check_vm_storage_locks+ run_make "CFW install" cfw_install_host VARIANT="$cfw_variant" SPOOF_BUILD="${SPOOF_BUILD:-}"fiif [[ "$LESS_MODE" -eq 0 || "$NO_BINPACK" -eq 0 ]]; thendiff --git a/scripts/vphone_jb_setup.sh b/scripts/vphone_jb_setup.shindex 1b9e9f89..ff8ca02e 100755--- a/scripts/vphone_jb_setup.sh+++ b/scripts/vphone_jb_setup.sh@@ -1,7 +1,7 @@#!/bin/bash# vphone_jb_setup.sh — First-boot JB finalization script.#-# Deployed to /cores/ during cfw_install_jb.sh (ramdisk phase).+# Deployed to /cores/ during cfw_install_jb.sh.# Runs automatically via LaunchDaemon on first normal boot.# Idempotent — safe to re-run on subsequent boots.#diff --git a/sources/vphone-cli/VPhoneCLI.swift b/sources/vphone-cli/VPhoneCLI.swiftindex c24c04af..0468f56b 100644--- a/sources/vphone-cli/VPhoneCLI.swift+++ b/sources/vphone-cli/VPhoneCLI.swift@@ -203,7 +203,7 @@ struct PatchComponentCLI: ParsableCommand {// Production JB patching runs through `patch-firmware --variant jb`; this// standalone option exists so `tests/test_jb_kernel_patches.sh` can run the// JB kernel layer over a single kernelcache and dump records via --records-out.- // (txm / kernel-base, by contrast, are also used by scripts/ramdisk_build.py.)+ // (txm / kernel-base, by contrast, are standalone single-component patchers.)case kernelJB = "kernel-jb"}diff --git a/tools/apfs_snap_rename.py b/tools/apfs_snap_rename.pyindex 5a5685c5..92d93429 100755--- a/tools/apfs_snap_rename.py+++ b/tools/apfs_snap_rename.py@@ -1,5 +1,5 @@#!/usr/bin/env python3-# Offline APFS root-snapshot rename for vphone Disk.img (ramdisk-free CFW flip).+# Offline APFS root-snapshot rename for vphone Disk.img (CFW boot-source flip).## Renames the com.apple.os.update-<hash> system snapshot in place so the# (seal-enforcement-patched) guest kernel can't find the named root snapshot