Skip to content

Run a virtual iPhone on an Apple Silicon Mac.

Swift

Apply Launchpad Developer Tools access without a relaunch

Jackyfe361a0b8dc0
diff --git a/AGENTS.md b/AGENTS.md
index 669095df..bf1cdf1d 100644
--- a/AGENTS.md
+++ b/AGENTS.md
@@ -58,7 +58,7 @@ The `VPhone` scheme puts host programs in `VPhone.bundle/Contents/MacOS` and eve
- `vphone-cli` is the unentitled entry point. `VPhoneGuestLaunchPlanner` resolves `vphone-vm` beside the running executable, checks its entitlements, probes AMFI, and reports the exact allowlist command on refusal. It never obtains root itself.
- `vphone-escalator` manages AMFI cdhash admission only. It writes amfid heap state, not executable code. Root authorization belongs to the user or to `vphone-launchpad`; neither `vphone-cli` nor the bundle has an SMJobBless or sudo password flow.
-- `vphone-launchpad` has no private entitlements. `SignLaunchpad.sh` gives its main executable two hardened-runtime resource entitlements, microphone (`com.apple.security.device.audio-input`) and location (`com.apple.security.personal-information.location`), from `VPhoneLaunchpad/Resources/VPhoneLaunchpad.entitlements`; its helper, CLI and launcher have none. It asks for Developer Tools access (`EPDeveloperTool`) and adds an `EPExecutionPolicy` exception for each installed bundle. Its helper is the only root surface: it installs verified releases into the root-owned store `/Library/Application Support/vphone-launchpad/Bundles`, runs that bundle's `vphone-escalator allow` for its receipt-pinned `vphone-vm`, runs `cfw install` from that store after rechecking the recorded cdhash, and runs that store bundle's `vphone-cli vm leases --release-orphans` for the caller's own library folders. There is no generic command verb. Launchpad starts `vm launch` detached (own session, responsibility disclaimed) through `vphone-launchpad-launcher` in its `Contents/MacOS`, which starts `vphone-cli` as an ordinary child and stays until it exits, forwarding stop signals and exiting the same way. The launcher is therefore the responsible process for `vphone-vm`. As a tool in the app's `Contents/MacOS` it is attributed to the app, so privacy prompts, usage descriptions and grants (microphone, location) are the app's, asked once for its Developer ID signature instead of for each ad hoc signed bundle build; under the hardened runtime macOS refuses them without asking unless the app carries the matching entitlement. It refuses anything but `vm launch` of a `vphone-cli` in the root-owned store (`VPhoneLaunchpadLauncherPolicy`); without the launcher, Launchpad starts `vphone-cli` directly. Nothing is signed at build time: `VPhoneLaunchpad/Build/SignLaunchpad.sh` signs afterwards, and the team comes from the gitignored `Configuration/Developer.xcconfig`. Never commit a team ID.
+- `vphone-launchpad` has no private entitlements. `SignLaunchpad.sh` gives its main executable two hardened-runtime resource entitlements, microphone (`com.apple.security.device.audio-input`) and location (`com.apple.security.personal-information.location`), from `VPhoneLaunchpad/Resources/VPhoneLaunchpad.entitlements`; its helper, CLI and launcher have none. It asks for Developer Tools access (`EPDeveloperTool`) and adds an `EPExecutionPolicy` exception for each installed bundle. `EPDeveloperTool.authorizationStatus` keeps the value the process launched with, while syspolicyd checks the live grant on every exception request, so Host Setup judges access by asking for an exception for Launchpad's own executable; a grant or a revocation in Settings applies without a relaunch. Its helper is the only root surface: it installs verified releases into the root-owned store `/Library/Application Support/vphone-launchpad/Bundles`, runs that bundle's `vphone-escalator allow` for its receipt-pinned `vphone-vm`, runs `cfw install` from that store after rechecking the recorded cdhash, and runs that store bundle's `vphone-cli vm leases --release-orphans` for the caller's own library folders. There is no generic command verb. Launchpad starts `vm launch` detached (own session, responsibility disclaimed) through `vphone-launchpad-launcher` in its `Contents/MacOS`, which starts `vphone-cli` as an ordinary child and stays until it exits, forwarding stop signals and exiting the same way. The launcher is therefore the responsible process for `vphone-vm`. As a tool in the app's `Contents/MacOS` it is attributed to the app, so privacy prompts, usage descriptions and grants (microphone, location) are the app's, asked once for its Developer ID signature instead of for each ad hoc signed bundle build; under the hardened runtime macOS refuses them without asking unless the app carries the matching entitlement. It refuses anything but `vm launch` of a `vphone-cli` in the root-owned store (`VPhoneLaunchpadLauncherPolicy`); without the launcher, Launchpad starts `vphone-cli` directly. Nothing is signed at build time: `VPhoneLaunchpad/Build/SignLaunchpad.sh` signs afterwards, and the team comes from the gitignored `Configuration/Developer.xcconfig`. Never commit a team ID.
- Launchpad and `VPhone.bundle` match by series, the first two numbers of the version: Launchpad 2.2.3 works with any `VPhone.bundle` 2.2.x, and the reverse. Patch releases within a series must stay interchangeable in both directions. A change to anything Launchpad relies on in the bundle (`vphone-cli` arguments or output, `vphone-escalator`, the bundle layout or receipt) needs a new minor version and a raised `minimumBundleComponents` in `VPhoneLaunchpad/VPhoneLaunchpadShared/VPhoneLaunchpadBundleStore.swift`. `Documents/Downloads/README.md` states this rule to users.
- Host VM artifacts, caches, and archives created by vphone use mode `0777` for workstation access. Symlinks are not followed when changing permissions. Guest filesystem modes inside `Disk.img` remain unchanged.
- `VPhoneRestore` runs in the CLI process over vendored libirecovery and idevicerestore. No Python or runtime Homebrew dependency is allowed.
diff --git a/Skills/vphone-guest-control/references/install-faq.md b/Skills/vphone-guest-control/references/install-faq.md
index 172d2a2a..47a26eba 100644
--- a/Skills/vphone-guest-control/references/install-faq.md
+++ b/Skills/vphone-guest-control/references/install-faq.md
@@ -40,7 +40,7 @@ tccutil reset DeveloperTool com.vphone.launchpad
```
then open Launchpad, choose **Open Settings**, turn the switch on for
-vphone-launchpad, and reopen Launchpad (the app does not close itself).
+vphone-launchpad, and switch back to Launchpad; Host Setup checks again.
Prevent a repeat by installing only the `-notarized` zip. Mixing the plain and
the notarized zip, or a local build and a release, recreates the problem. A
user on an ad hoc build must reset after every switch. `status` →
diff --git a/Skills/vphone-guest-control/references/install.md b/Skills/vphone-guest-control/references/install.md
index 7706e58a..8c7f3ca2 100644
--- a/Skills/vphone-guest-control/references/install.md
+++ b/Skills/vphone-guest-control/references/install.md
@@ -41,7 +41,8 @@ Recovery and are the owner's call. Say which check failed and stop.
to update, download the new version and replace the app.
4. Open it once. On first launch the user completes Host Setup: allow
Developer Tools access, and install the helper (it asks for an administrator
- password). Developer Tools access takes effect after Launchpad is relaunched.
+ password). Developer Tools access takes effect as soon as the switch is on;
+ Launchpad checks it again when it comes to the front, without a relaunch.
`canInstallBundles` in `status` turns `true` when both are done.
Which versions are notarized is listed in `Documents/Downloads/README.md`.
diff --git a/Skills/vphone-guest-control/references/troubleshooting.md b/Skills/vphone-guest-control/references/troubleshooting.md
index 89c60275..4592be31 100644
--- a/Skills/vphone-guest-control/references/troubleshooting.md
+++ b/Skills/vphone-guest-control/references/troubleshooting.md
@@ -20,7 +20,7 @@ notes.
| Symptom | Cause and what to do |
| --- | --- |
| `vphone-launchpad-cli: command not found` | Not installed or not on PATH. [install](install.md) |
-| `canInstallBundles: false` | `helper` is missing or outdated, or Developer Tools access is not granted. The user fixes it in Launchpad's Host Setup; relaunch Launchpad afterwards |
+| `canInstallBundles: false` | `helper` is missing or outdated, or Developer Tools access is not granted. The user fixes it in Launchpad's Host Setup; `status` reads the grant again, no relaunch needed |
| "Unable to Start <name>" with "did not pass host preflight", or "is not installed" | The machine's own bundle (`vm list` → `bundle`) failed its checks or is gone. `bundle verify <version>`, then read `bundle list` → `preflightDetail`; for a missing one, install it or `vm set-bundle` to another version |
| `vphone-vm` is killed before a window opens | AMFI refused the entitled binary. `bundle verify`; a rebuilt bundle has a new cdhash and needs the allowlist again. Host SIP/AMFI settings are the owner's to change |
| Prompt for an administrator password | Expected after the helper's five-minute authorization lapses. Tell the user; do not loop |
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadModel.swift b/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadModel.swift
index 3419e328..a8b6505d 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadModel.swift
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadModel.swift
@@ -37,8 +37,6 @@ final class VPhoneLaunchpadModel {
var panel: Panel?
/// The panel to open once the sheet on screen has closed.
private var queuedPanel: Panel?
- /// Runs once the sheet on screen has finished closing.
- private var pendingAfterDismiss: (() -> Void)?
private(set) var isStarted = false
init() {
@@ -68,23 +66,11 @@ final class VPhoneLaunchpadModel {
/// `next` here would swap it into the closing sheet. The next turn of the
/// main actor runs after the sheet has gone.
func panelDidDismiss() {
- let next = queuedPanel
- let pending = pendingAfterDismiss
- queuedPanel = nil
- pendingAfterDismiss = nil
- guard next != nil || pending != nil else { return }
- Task {
- if let next {
- panel = next
- }
- pending?()
+ guard let next = queuedPanel else {
+ return
}
- }
-
- /// Runs `action` on the next turn after the sheet on screen has closed.
- /// The sheet is still attached when its dismiss handler runs.
- func afterSheetDismissed(_ action: @escaping () -> Void) {
- pendingAfterDismiss = action
+ queuedPanel = nil
+ Task { panel = next }
}
// MARK: - Attention
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadRootView.swift b/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadRootView.swift
index 55b9c8e0..85fd528b 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadRootView.swift
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/Application/VPhoneLaunchpadRootView.swift
@@ -17,6 +17,10 @@ struct VPhoneLaunchpadRootView: View {
}
.navigationTitle("Machines")
.task { await model.start() }
+ // Coming back from Settings, with or without Host Setup open.
+ .onReceive(NotificationCenter.default.publisher(for: NSApplication.didBecomeActiveNotification)) { _ in
+ host.refreshDeveloperTools()
+ }
.sheet(item: $model.panel, onDismiss: model.panelDidDismiss) { panel in
Group {
switch panel {
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/Control/VPhoneLaunchpadControlCommands.swift b/VPhoneLaunchpad/VPhoneLaunchpad/Control/VPhoneLaunchpadControlCommands.swift
index 18d5506c..ace0c410 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/Control/VPhoneLaunchpadControlCommands.swift
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/Control/VPhoneLaunchpadControlCommands.swift
@@ -72,6 +72,8 @@ struct VPhoneLaunchpadControlCommands {
// MARK: - Status
private func status() -> [String: Any] {
+ // A grant made in Settings while the app stayed in the background.
+ model.host.refreshDeveloperTools()
let helper = switch model.helper.state {
case .unknown: "unknown"
case .notInstalled: "not installed"
@@ -129,6 +131,7 @@ struct VPhoneLaunchpadControlCommands {
}
private func requireInstallable() throws {
+ model.host.refreshDeveloperTools()
guard !model.canInstallBundles else {
return
}
@@ -138,7 +141,7 @@ struct VPhoneLaunchpadControlCommands {
guard case .ready = model.helper.state else {
throw VPhoneLaunchpadError("The helper is not installed or is outdated. Install it in Host Setup.")
}
- throw VPhoneLaunchpadError("Launchpad does not have Developer Tools access. Allow it in Host Setup, then relaunch Launchpad.")
+ throw VPhoneLaunchpadError("Launchpad does not have Developer Tools access. Allow it in Host Setup.")
}
private func installLocal(_ request: VPhoneLaunchpadControlRequest, emit: @escaping Emit) async throws -> Any {
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetup.swift b/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetup.swift
index 6a2b42d4..24f4d210 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetup.swift
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetup.swift
@@ -50,14 +50,10 @@ final class VPhoneLaunchpadHostSetup {
]
private(set) var isChecking = false
var actionError: VPhoneLaunchpadError?
- /// Set once Settings was opened for Developer Tools. The status the
- /// system reports can lag the switch, so Reopen is offered from then on.
+ /// Set once Settings was opened for Developer Tools, so a refusal then
+ /// reads "Not allowed" rather than "Not requested".
private(set) var didOpenDeveloperTools = false
- /// Developer Tools access applies to processes launched after it is
- /// granted. This process keeps the access it started with.
- @ObservationIgnored private let launchDeveloperToolStatus = EPDeveloperTool().authorizationStatus
-
let helper: VPhoneLaunchpadHelperClient
let libraryRoot: URL
@@ -117,24 +113,15 @@ final class VPhoneLaunchpadHostSetup {
UserDefaults.standard.set(skipped.map(\.rawValue).sorted(), forKey: Self.skippedKey)
}
+ /// The Developer Tools row as last checked. `refreshDeveloperTools()`
+ /// checks again; the app does so whenever it becomes active.
var isDeveloperToolAuthorized: Bool {
- #if DEBUG
- if VPhoneLaunchpadPreview.isActive {
- return checks.first { $0.kind == .developerTools }?.status == .passed
- }
- #endif
- return launchDeveloperToolStatus == .authorized && EPDeveloperTool().authorizationStatus == .authorized
+ checks.first { $0.kind == .developerTools }?.status == .passed
}
- /// False once the system reports the grant, even before a relaunch.
+ /// Settings cannot lift a restriction set by the system or a profile.
var canRequestDeveloperTools: Bool {
- EPDeveloperTool().authorizationStatus != .authorized
- }
-
- /// True when a grant made after launch needs a relaunch to apply.
- var needsRelaunch: Bool {
- launchDeveloperToolStatus != .authorized
- && (didOpenDeveloperTools || EPDeveloperTool().authorizationStatus == .authorized)
+ EPDeveloperTool().authorizationStatus != .restricted
}
// MARK: - Checking
@@ -196,33 +183,6 @@ final class VPhoneLaunchpadHostSetup {
NSWorkspace.shared.open(Self.developerToolsSettings)
}
- /// Quits and opens Launchpad again so a new Developer Tools grant
- /// applies. A detached waiter opens the app once this process has exited.
- /// No machine can be in creation here: Core Bundle needs this access.
- ///
- /// Call this only after the sheet that triggered it has closed.
- /// Terminating while a sheet is still attached makes SwiftUI answer
- /// `.terminateLater` and never reply, so the quit stalls and every later
- /// attempt is ignored.
- func relaunch() {
- let waiter = Process()
- waiter.executableURL = URL(fileURLWithPath: "/bin/sh")
- waiter.arguments = [
- "-c",
- "while /bin/kill -0 \"$1\" 2>/dev/null; do /bin/sleep 0.2; done; /usr/bin/open \"$2\"",
- "sh",
- String(getpid()),
- Bundle.main.bundlePath,
- ]
- do {
- try waiter.run()
- } catch {
- actionError = VPhoneLaunchpadError(String(localized: "Unable to Reopen"), detail: String(localized: "Quit vphone-launchpad and open it again."))
- return
- }
- NSApp.terminate(nil)
- }
-
private static let developerToolsSettings = URL(
string: "x-apple.systempreferences:com.apple.preference.security?Privacy_DevTools",
)!
@@ -240,18 +200,48 @@ final class VPhoneLaunchpadHostSetup {
update(.helper, helperStatus())
}
+ /// `EPDeveloperTool.authorizationStatus` keeps the answer this process
+ /// launched with: a grant or a revocation in Settings does not reach it
+ /// until a relaunch. syspolicyd checks the grant itself on every exception
+ /// request, so that request is what decides; the reported status only
+ /// names a refusal, or answers when syspolicyd could not be asked.
private func developerTools() -> (VPhoneLaunchpadStatus, String) {
- switch EPDeveloperTool().authorizationStatus {
- case .authorized where launchDeveloperToolStatus == .authorized:
- (.passed, String(localized: "Allowed"))
- case .authorized:
- (.pending, String(localized: "Reopen to apply"))
- case .denied:
- (.failed, String(localized: "Not allowed"))
- case .restricted:
- (.failed, String(localized: "Restricted by the system"))
- default:
- (.pending, String(localized: "Not requested"))
+ let reported = EPDeveloperTool().authorizationStatus
+ switch Self.developerToolGrant() {
+ case true?:
+ return (.passed, String(localized: "Allowed"))
+ case false? where reported == .restricted:
+ return (.failed, String(localized: "Restricted by the system"))
+ case false? where reported == .notDetermined && !didOpenDeveloperTools:
+ return (.pending, String(localized: "Not requested"))
+ case false?:
+ return (.failed, String(localized: "Not allowed"))
+ case nil:
+ switch reported {
+ case .authorized: return (.passed, String(localized: "Allowed"))
+ case .denied: return (.failed, String(localized: "Not allowed"))
+ case .restricted: return (.failed, String(localized: "Restricted by the system"))
+ default: return (.pending, String(localized: "Not requested"))
+ }
+ }
+ }
+
+ /// Whether syspolicyd takes this process for a developer tool now: it
+ /// refuses an execution policy exception to any other caller. The
+ /// exception asked for is for Launchpad's own running executable, which
+ /// it already lets run, so granting it changes nothing. Nil when the
+ /// request failed for another reason.
+ private nonisolated static func developerToolGrant() -> Bool? {
+ guard let executable = Bundle.main.executableURL else {
+ return nil
+ }
+ do {
+ try EPExecutionPolicy().addException(for: executable)
+ return true
+ } catch let error as EPError where error.code == .notADeveloperTool {
+ return false
+ } catch {
+ return nil
}
}
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetupView.swift b/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetupView.swift
index a9aeb12e..15446a79 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetupView.swift
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/HostSetup/VPhoneLaunchpadHostSetupView.swift
@@ -38,9 +38,6 @@ struct VPhoneLaunchpadHostSetupView: View {
.sheet(isPresented: $showsSkillInstall) {
VPhoneLaunchpadSkillInstallView()
}
- .onReceive(NotificationCenter.default.publisher(for: NSApplication.didBecomeActiveNotification)) { _ in
- host.refreshDeveloperTools()
- }
.errorAlert($host.actionError)
.errorAlert($leases.actionError)
.task { await model.leases.refresh() }
@@ -73,7 +70,7 @@ struct VPhoneLaunchpadHostSetupView: View {
if !host.requiredPassed {
VStack(alignment: .leading, spacing: 4) {
if host.checks.contains(where: { $0.kind == .developerTools && $0.status != .passed }) {
- Text("Allow vphone-launchpad in Privacy & Security → Developer Tools, then click Reopen.")
+ Text("Allow vphone-launchpad in Privacy & Security → Developer Tools, then come back to Launchpad.")
}
Text("A Core Bundle can be installed once every required check passes.")
}
@@ -136,19 +133,9 @@ struct VPhoneLaunchpadHostSetupView: View {
private func action(for check: VPhoneLaunchpadHostCheck) -> some View {
switch check.kind {
case .developerTools where check.status != .passed:
- HStack(spacing: 8) {
- if host.canRequestDeveloperTools {
- Button("Open Settings") {
- Task { await host.requestDeveloperTools() }
- }
- }
- if host.needsRelaunch {
- Button("Reopen") {
- // The sheet is still attached when its dismiss handler
- // runs; relaunch on the turn after it has gone.
- model.afterSheetDismissed { host.relaunch() }
- dismiss()
- }
+ if host.canRequestDeveloperTools {
+ Button("Open Settings") {
+ Task { await host.requestDeveloperTools() }
}
}
case .helper where check.status == .pending:
diff --git a/VPhoneLaunchpad/VPhoneLaunchpad/Localizable.xcstrings b/VPhoneLaunchpad/VPhoneLaunchpad/Localizable.xcstrings
index 3d987c99..38a558b5 100644
--- a/VPhoneLaunchpad/VPhoneLaunchpad/Localizable.xcstrings
+++ b/VPhoneLaunchpad/VPhoneLaunchpad/Localizable.xcstrings
@@ -1530,36 +1530,36 @@
}
}
},
- "Allow vphone-launchpad in Privacy & Security → Developer Tools, then click Reopen." : {
+ "Allow vphone-launchpad in Privacy & Security → Developer Tools, then come back to Launchpad." : {
"localizations" : {
"en" : {
"stringUnit" : {
"state" : "translated",
- "value" : "Allow vphone-launchpad in Privacy & Security → Developer Tools, then click Reopen."
+ "value" : "Allow vphone-launchpad in Privacy & Security → Developer Tools, then come back to Launchpad."
}
},
"ja" : {
"stringUnit" : {
"state" : "translated",
- "value" : "「プライバシーとセキュリティ」→「デベロッパツール」で vphone-launchpad を許可してから、「開き直す」をクリックしてください。"
+ "value" : "「プライバシーとセキュリティ」→「デベロッパツール」で vphone-launchpad を許可してから、Launchpad に戻ってください。"
}
},
"ko" : {
"stringUnit" : {
"state" : "translated",
- "value" : "개인정보 보호 및 보안 → 개발자 도구에서 vphone-launchpad를 허용한 후 다시 열기를 클릭하십시오."
+ "value" : "개인정보 보호 및 보안 → 개발자 도구에서 vphone-launchpad를 허용한 후 Launchpad로 돌아오십시오."
}
},
"vi" : {
"stringUnit" : {
"state" : "translated",
- "value" : "Hãy cho phép vphone-launchpad trong Quyền riêng tư & Bảo mật → Công cụ dành cho nhà phát triển, rồi bấm Mở lại."
+ "value" : "Hãy cho phép vphone-launchpad trong Quyền riêng tư & Bảo mật → Công cụ dành cho nhà phát triển, rồi quay lại Launchpad."
}
},
"zh-Hans" : {
"stringUnit" : {
"state" : "translated",
- "value" : "在“隐私与安全性”→“开发者工具”中允许 vphone-launchpad,然后点按“重新打开”。"
+ "value" : "在“隐私与安全性”→“开发者工具”中允许 vphone-launchpad,然后回到 Launchpad。"
}
}
}
@@ -8554,40 +8554,6 @@
}
}
},
- "Quit vphone-launchpad and open it again." : {
- "localizations" : {
- "en" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Quit vphone-launchpad and open it again."
- }
- },
- "ja" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "vphone-launchpad を終了して、もう一度開いてください。"
- }
- },
- "ko" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "vphone-launchpad를 종료한 후 다시 여십시오."
- }
- },
- "vi" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Hãy thoát vphone-launchpad rồi mở lại."
- }
- },
- "zh-Hans" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "退出 vphone-launchpad,然后重新打开。"
- }
- }
- }
- },
"Quitting stops creating this machine. You can retry later from the step where it stopped." : {
"localizations" : {
"en" : {
@@ -9030,74 +8996,6 @@
}
}
},
- "Reopen" : {
- "localizations" : {
- "en" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Reopen"
- }
- },
- "ja" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "開き直す"
- }
- },
- "ko" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "다시 열기"
- }
- },
- "vi" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Mở lại"
- }
- },
- "zh-Hans" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "重新打开"
- }
- }
- }
- },
- "Reopen to apply" : {
- "localizations" : {
- "en" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Reopen to apply"
- }
- },
- "ja" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "開き直すと適用されます"
- }
- },
- "ko" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "다시 열면 적용됨"
- }
- },
- "vi" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Mở lại để áp dụng"
- }
- },
- "zh-Hans" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "重新打开后生效"
- }
- }
- }
- },
"Require Preflight" : {
"localizations" : {
"en" : {
@@ -11956,40 +11854,6 @@
}
}
},
- "Unable to Reopen" : {
- "localizations" : {
- "en" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Unable to Reopen"
- }
- },
- "ja" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "開き直せません"
- }
- },
- "ko" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "다시 열 수 없음"
- }
- },
- "vi" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "Không thể mở lại"
- }
- },
- "zh-Hans" : {
- "stringUnit" : {
- "state" : "translated",
- "value" : "无法重新打开"
- }
- }
- }
- },
"Unable to save the token in the keychain." : {
"localizations" : {
"en" : {