Skip to content

armgit / wger

Public Imported from GitHub
0

Self hosted FLOSS fitness/workout, nutrition and weight tracker

Remove docs folder, was extracted to own repo

Roland Geider4d2d618db1db
diff --git a/README.md b/README.md
index 0d66a5b66..58af95280 100644
--- a/README.md
+++ b/README.md
@@ -24,8 +24,8 @@ For a live system, refer to the project's site: <https://wger.de/>
These are the basic steps to install and run the application locally on a Linux
system. There are more detailed instructions, other deployment options as well
-as an administration guide available at <https://wger.readthedocs.io> or locally
-in your code repository in the docs folder.
+as an administration guide available at <https://wger.readthedocs.io> or in the
+[docs repo](https://github.com/wger-project/docs).
Please consult the commands' help for further information and available
parameters.
diff --git a/docs/Makefile b/docs/Makefile
deleted file mode 100644
index dc20f0830..000000000
--- a/docs/Makefile
+++ /dev/null
@@ -1,177 +0,0 @@
-# Makefile for Sphinx documentation
-#
-
-# You can set these variables from the command line.
-SPHINXOPTS =
-SPHINXBUILD = sphinx-build
-PAPER =
-BUILDDIR = _build
-
-# User-friendly check for sphinx-build
-ifeq ($(shell which $(SPHINXBUILD) >/dev/null 2>&1; echo $$?), 1)
-$(error The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed, then set the SPHINXBUILD environment variable to point to the full path of the '$(SPHINXBUILD)' executable. Alternatively you can add the directory with the executable to your PATH. If you don't have Sphinx installed, grab it from http://sphinx-doc.org/)
-endif
-
-# Internal variables.
-PAPEROPT_a4 = -D latex_paper_size=a4
-PAPEROPT_letter = -D latex_paper_size=letter
-ALLSPHINXOPTS = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-# the i18n builder cannot share the environment and doctrees with the others
-I18NSPHINXOPTS = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
-
-.PHONY: help clean html dirhtml singlehtml pickle json htmlhelp qthelp devhelp epub latex latexpdf text man changes linkcheck doctest gettext
-
-help:
- @echo "Please use \`make <target>' where <target> is one of"
- @echo " html to make standalone HTML files"
- @echo " dirhtml to make HTML files named index.html in directories"
- @echo " singlehtml to make a single large HTML file"
- @echo " pickle to make pickle files"
- @echo " json to make JSON files"
- @echo " htmlhelp to make HTML files and a HTML help project"
- @echo " qthelp to make HTML files and a qthelp project"
- @echo " devhelp to make HTML files and a Devhelp project"
- @echo " epub to make an epub"
- @echo " latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
- @echo " latexpdf to make LaTeX files and run them through pdflatex"
- @echo " latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
- @echo " text to make text files"
- @echo " man to make manual pages"
- @echo " texinfo to make Texinfo files"
- @echo " info to make Texinfo files and run them through makeinfo"
- @echo " gettext to make PO message catalogs"
- @echo " changes to make an overview of all changed/added/deprecated items"
- @echo " xml to make Docutils-native XML files"
- @echo " pseudoxml to make pseudoxml-XML files for display purposes"
- @echo " linkcheck to check all external links for integrity"
- @echo " doctest to run all doctests embedded in the documentation (if enabled)"
-
-clean:
- rm -rf $(BUILDDIR)/*
-
-html:
- $(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
-
-dirhtml:
- $(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
- @echo
- @echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
-
-singlehtml:
- $(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
- @echo
- @echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
-
-pickle:
- $(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
- @echo
- @echo "Build finished; now you can process the pickle files."
-
-json:
- $(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
- @echo
- @echo "Build finished; now you can process the JSON files."
-
-htmlhelp:
- $(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
- @echo
- @echo "Build finished; now you can run HTML Help Workshop with the" \
- ".hhp project file in $(BUILDDIR)/htmlhelp."
-
-qthelp:
- $(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
- @echo
- @echo "Build finished; now you can run "qcollectiongenerator" with the" \
- ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
- @echo "# qcollectiongenerator $(BUILDDIR)/qthelp/wgerWorkoutManager.qhcp"
- @echo "To view the help file:"
- @echo "# assistant -collectionFile $(BUILDDIR)/qthelp/wgerWorkoutManager.qhc"
-
-devhelp:
- $(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
- @echo
- @echo "Build finished."
- @echo "To view the help file:"
- @echo "# mkdir -p $$HOME/.local/share/devhelp/wgerWorkoutManager"
- @echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/wgerWorkoutManager"
- @echo "# devhelp"
-
-epub:
- $(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
- @echo
- @echo "Build finished. The epub file is in $(BUILDDIR)/epub."
-
-latex:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo
- @echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
- @echo "Run \`make' in that directory to run these through (pdf)latex" \
- "(use \`make latexpdf' here to do that automatically)."
-
-latexpdf:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo "Running LaTeX files through pdflatex..."
- $(MAKE) -C $(BUILDDIR)/latex all-pdf
- @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-latexpdfja:
- $(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
- @echo "Running LaTeX files through platex and dvipdfmx..."
- $(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
- @echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
-
-text:
- $(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
- @echo
- @echo "Build finished. The text files are in $(BUILDDIR)/text."
-
-man:
- $(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
- @echo
- @echo "Build finished. The manual pages are in $(BUILDDIR)/man."
-
-texinfo:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo
- @echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
- @echo "Run \`make' in that directory to run these through makeinfo" \
- "(use \`make info' here to do that automatically)."
-
-info:
- $(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
- @echo "Running Texinfo files through makeinfo..."
- make -C $(BUILDDIR)/texinfo info
- @echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
-
-gettext:
- $(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
- @echo
- @echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
-
-changes:
- $(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
- @echo
- @echo "The overview file is in $(BUILDDIR)/changes."
-
-linkcheck:
- $(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
- @echo
- @echo "Link check complete; look for any errors in the above output " \
- "or in $(BUILDDIR)/linkcheck/output.txt."
-
-doctest:
- $(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
- @echo "Testing of doctests in the sources finished, look at the " \
- "results in $(BUILDDIR)/doctest/output.txt."
-
-xml:
- $(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
- @echo
- @echo "Build finished. The XML files are in $(BUILDDIR)/xml."
-
-pseudoxml:
- $(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
- @echo
- @echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
diff --git a/docs/changelog.rst b/docs/changelog.rst
deleted file mode 100644
index 59463b303..000000000
--- a/docs/changelog.rst
+++ /dev/null
@@ -1,702 +0,0 @@
-Changelog
-=========
-
-2.1 - IN DEVELOPMENT
---------------------
-**2021-XX-XX**
-
-Upgrade steps from 2.0:
-
-* Update python libraries ``pip3 install -r requirements.txt``
-* Run migrations ``python3 manage.py migrate``
-* Update CSS and JS libraries ``yarn install``
-* Compile the CSS ``yarn build:css:sass``
-* Update static files (only production): ``python3 manage.py collectstatic``
-
-🚀 Features:
-
-* New gallery where users can upload pictures to track their progress `#572`_
-* Add templates / centrally managed workouts (thanks `@qwert45hi`_) `#639`_
-* Add comment filed to set for user notes `#702`_
-* Custom measurements such as biceps size or body fat `#133`_
-* Add picture type to exercise images (thanks `@LucasSD`_) `#589`_
-* Add toptional relation from nutritional diary to meal (thanks `@Alig1493`_) `#819`_
-
-🐛 Bug Fixes:
-
-* ...
-
-🧰 Maintenance:
-
-* Changes to the REST API:
-
- + /exerciseimage/
- - ``exercise`` was renamed to ``exercise_base`` (was pointing there anyway)
- - New field ``style``
- + /workout/
- - ``comment`` was renamed to name
- - field ``description`` was added, for longer descriptions
- + /set/
- - field ``comment`` added, for user notes
- + /nutritiondiary/
- - field ``meal`` added, optional reference to meal
- + /min-app-version/
- - New endpoint indicating minimum required version for flutter app
-* `#666`_, `#667`_, `#656`_ (thanks `@jackmulligan-ire`_), `#716`_
-
-.. _#133: https://github.com/wger-project/wger/issues/133
-.. _#572: https://github.com/wger-project/wger/issues/572
-.. _#589: https://github.com/wger-project/wger/issues/589
-.. _#639: https://github.com/wger-project/wger/issues/639
-.. _#656: https://github.com/wger-project/wger/issues/656
-.. _#666: https://github.com/wger-project/wger/issues/666
-.. _#667: https://github.com/wger-project/wger/issues/667
-.. _#702: https://github.com/wger-project/wger/issues/702
-.. _#716: https://github.com/wger-project/wger/issues/716
-.. _#819: https://github.com/wger-project/wger/issues/819
-
-.. _@Alig1493: https://github.com/Alig1493
-.. _@LucasSD: https://github.com/LucasSD
-.. _@qwert45hi: https://github.com/qwert45hi
-.. _@jackmulligan-ire: https://github.com/jackmulligan-ire
-
-
-2.0
---------------------
-**2021-05-01**
-
-Upgrade steps from 1.9:
-
-* Update python libraries ``pip3 install -r requirements.txt``
-* Install ``yarn`` and ``sass`` (e.g. ``sudo npm install -g yarn sass``)
-* Update CSS and JS libraries ``yarn install``
-* Compile the CSS ``yarn build:css:sass``
-* Run migrations ``python3 manage.py migrate``
-* Update data ``python3 manage.py loaddata licenses.json languages.json language_config.json``
-* Load new ingredients (note that this will overwrite any ingredients that you
- might have added) ``wger load-online-fixtures``
-* Update static files (only production): ``python3 manage.py collectstatic``
-* Subcommands for ``wger`` now use dashes in their names (i.e. create-settings
- instead of create_settings)
-
-
-🚀 Features:
-
-* Add nutrition diary to log the daily calories actually taken `#284`_, `#501`_
- and `#506`_ (thanks `@WalkingPizza`_ and `@oconnelc`_)
-* Support for reps-in-reserve (RiR) in workout plans and logs `#479`_
- (thanks `@SkyNetIndustry`_)
-* Improved user experience, on desktop and mobile `#337`_
-* Around 70000 new ingredients with Open Food Facts import with more to come `#422`_
- (thanks `@harlenesamra`_, `@nikithamurikinati`_ and `@jcho1`_)
-* Group common exercise information such as muscles, etc. for more easy translations,
- data management, etc. `#448`_ (thanks `@nikithamurikinati`_, `@harlenesamra`_,
- `@jcho17`_, `@vaheeshta`_ and `@jeevikaghosh`_)
-* Group similar exercises such as wide grip, reverse, etc. `#555`_
- (thanks `@ryowright`_)
-* Improved info endpoints for exercises and ingredients, this saves additional
- API calls `#411`_
-* Show BMI on weight graph `#462`_ (thanks `@Svn-Sp`_)
-* Allow user to edit and delete body weight entries `#478`_ (thanks `@beingbiplov`_)
-* Show kJoules as well as kcal in nutritional plan `#568`_ (thanks `@nopinter`_ and `@derekli17`_)
-* Check name similarity when adding exercises to avoid duplicates `#551`_
- (thanks `@lydiaxing`_, `@eq8913`_, `@Hita-K`_)
-* Return the muscle background images in the REST API `#547`_ (thanks `@gengkev`_)
-
-
-🐛 Bug Fixes:
-
-* `#368`_, `#379`_, `#426`_ (thanks `@austin-leung`_), `#499`_, `#505`_, `#504`_,
- `#511`_, `#516`_, `#522`_, `#554`_ and `#560`_ (thanks `@sandilsranasinghe`_),
- `#564`_, `#565`_, `#615`_, `#560`_ (thanks `@bradsk88`_), `#617`_ (thanks `@Sidrah-Madiha`_),
- `#636`_, `#640`_, `#642`_, `#648`_, `#650`_
-
-
-🧰 Maintenance:
-
-* Moved translations to weblate `#266`_
-* Improved docker and docker-compose images `#340`_
-* Updated many libraries to the last version (bootstrap, font awesome, etc.)
-* Use yarn to download CSS/JS libraries
-* Improvements to documentation (e.g. `#494`_)
-* Improved cache handling `#246`_ (thanks `@louiCoder`_)
-* Others: `#450`_ (thanks `@Rkamath2`_), `#631`_ (thanks `@harlenesamra`_), `#664`_ (thanks `@calvinrw`_),
-
-.. _@Svn-Sp: https://github.com/Svn-Sp
-.. _@louiCoder: https://github.com/louiCoder
-.. _@WalkingPizza: https://github.com/WalkingPizza
-.. _@oconnelc: https://github.com/oconnelc
-.. _@beingbiplov: https://github.com/beingbiplov
-.. _@sandilsranasinghe: https://github.com/sandilsranasinghe
-.. _@Rkamath2: https://github.com/Rkamath2
-.. _@SkyNetIndustry: https://github.com/SkyNetIndustry
-.. _@ryowright: https://github.com/ryowright
-.. _@austin-leung: https://github.com/austin-leung
-.. _@harlenesamra: https://github.com/harlenesamra
-.. _@lydiaxing: https://github.com/lydiaxing
-.. _@eq8913: https://github.com/eq8913
-.. _@Hita-K: https://github.com/Hita-K
-.. _@derekli17: https://github.com/derekli17
-.. _@nopinter: https://github.com/nopinter
-.. _@gengkev: https://github.com/gengkev
-.. _@nikithamurikinati: https://github.com/nikithamurikinati
-.. _@jcho1: https://github.com/jcho1
-.. _@jcho17: https://github.com/jcho17
-.. _@vaheeshta: https://github.com/vaheeshta
-.. _@jeevikaghosh: https://github.com/jeevikaghosh
-.. _@bradsk88: https://github.com/bradsk88
-.. _@Sidrah-Madiha: https://github.com/Sidrah-Madiha
-.. _@calvinrw: https://github.com/calvinrw
-
-
-.. _#246: https://github.com/wger-project/wger/issues/246
-.. _#266: https://github.com/wger-project/wger/issues/266
-.. _#284: https://github.com/wger-project/wger/issues/284
-.. _#337: https://github.com/wger-project/wger/issues/337
-.. _#340: https://github.com/wger-project/wger/issues/340
-.. _#368: https://github.com/wger-project/wger/issues/368
-.. _#379: https://github.com/wger-project/wger/issues/379
-.. _#411: https://github.com/wger-project/wger/issues/411
-.. _#422: https://github.com/wger-project/wger/issues/422
-.. _#426: https://github.com/wger-project/wger/issues/426
-.. _#448: https://github.com/wger-project/wger/issues/448
-.. _#450: https://github.com/wger-project/wger/issues/450
-.. _#462: https://github.com/wger-project/wger/issues/462
-.. _#478: https://github.com/wger-project/wger/issues/478
-.. _#479: https://github.com/wger-project/wger/issues/479
-.. _#494: https://github.com/wger-project/wger/issues/494
-.. _#499: https://github.com/wger-project/wger/issues/499
-.. _#501: https://github.com/wger-project/wger/issues/501
-.. _#504: https://github.com/wger-project/wger/issues/504
-.. _#505: https://github.com/wger-project/wger/issues/505
-.. _#506: https://github.com/wger-project/wger/issues/506
-.. _#511: https://github.com/wger-project/wger/issues/511
-.. _#516: https://github.com/wger-project/wger/issues/516
-.. _#522: https://github.com/wger-project/wger/issues/522
-.. _#547: https://github.com/wger-project/wger/issues/547
-.. _#550: https://github.com/wger-project/wger/issues/550
-.. _#551: https://github.com/wger-project/wger/issues/551
-.. _#554: https://github.com/wger-project/wger/issues/554
-.. _#555: https://github.com/wger-project/wger/issues/555
-.. _#560: https://github.com/wger-project/wger/issues/560
-.. _#564: https://github.com/wger-project/wger/issues/564
-.. _#565: https://github.com/wger-project/wger/issues/565
-.. _#568: https://github.com/wger-project/wger/issues/568
-.. _#615: https://github.com/wger-project/wger/issues/615
-.. _#617: https://github.com/wger-project/wger/issues/617
-.. _#631: https://github.com/wger-project/wger/issues/631
-.. _#636: https://github.com/wger-project/wger/issues/636
-.. _#640: https://github.com/wger-project/wger/issues/640
-.. _#642: https://github.com/wger-project/wger/issues/642
-.. _#648: https://github.com/wger-project/wger/issues/648
-.. _#650: https://github.com/wger-project/wger/issues/650
-.. _#664: https://github.com/wger-project/wger/issues/664
-
-
-
-1.9
----
-**2020-06-29**
-
-Upgrade steps from 1.8:
-
-* Django update to 3.x: ``pip install -r requirements.txt``
-* Database upgrade: ``python manage.py migrate``
-* Update static files (only production): ``python manage.py collectstatic``
-
-New features:
-
-* Allow users to enter their birthdate instead of just the age (thanks `@dtopal`_) `#332`_
-* Work to ensure that mobile templates are used when appropriate
-* Added optional S3 static asset hosting.
-* Drop Python 2 support.
-* Replaced django-mobile with django-user_agent (and some custom code)
- This isn't as slick as django-mobile was, but it unblocks possible Django 2.x support.
-* Update many dependencies to current versions.
-
-Improvements:
-
-* Improve the look of weight graph (thanks `@alokhan`_) `#381`_
-* Added password validation rules for more security
-* Exercise image downloader checks only accepted exercises (thanks `@gmmoraes`_) `#363`_
-* Use a native data type for the exercises' UUID (thanks `@gmmoraes`_) `#364`_
-* Increase speed of testsuite by performing the tests in parallel (thanks `@Mbarak-Mbigo`_) `wger_vulcan/#6`_
-* Update screen when adding an exercise to the workout while using set slider (thanks `@gmmoraes`_) `#374`_
-* Work to slim docker image
- * Download images at startup - If `DOWNLOAD_IMGS` environmental variable is set to `TRUE`
- * Uninstall dev packages
-* Update Ubuntu version used in docker container.
-* Fixed a handful of hard coded static path references to use `static` taglib
-* Updated tinymce theme for v5.
-
-Other improvements and bugfixes: `#336`_, `#359`_,`#386`_, `#443`_
-
-.. _@gmmoraes: https://github.com/gmmoraes
-.. _@Mbarak-Mbigo: https://github.com/Mbarak-Mbigo
-.. _@dtopal: https://github.com/dtopal
-
-.. _wger_vulcan/#6: https://github.com/andela/wger_vulcan/pull/6
-
-.. _#332: https://github.com/wger-project/wger/issues/332
-.. _#336: https://github.com/wger-project/wger/issues/336
-.. _#359: https://github.com/wger-project/wger/issues/359
-.. _#363: https://github.com/wger-project/wger/issues/363
-.. _#364: https://github.com/wger-project/wger/issues/364
-.. _#374: https://github.com/wger-project/wger/issues/374
-.. _#381: https://github.com/wger-project/wger/issues/381
-.. _#386: https://github.com/wger-project/wger/issues/386
-.. _#443: https://github.com/wger-project/wger/issues/443
-
-
-1.8
----
-**2017-04-05**
-
-.. warning ::
- There have been some changes to the installation procedure. Calling 'invoke'
- on its own has been deprecated, you should use the 'wger' command (which
- accepts the same options). Also, some of these commands have been renamed:
-
- * ``start_wger`` to ``wger``
- * ``bootstrap_wger`` to ``bootstrap``
-
-Upgrade steps from 1.7:
-
-* Django update to 1.9: ``pip install -r requirements.txt``
-* Database upgrade: ``python manage.py migrate``
-* Reset cache: ``python manage.py clear-cache --clear-all``
-* Due to changes in the JS package management, you have to delete
- wger/core/static/bower_components and do a ``python manage.py bower install``
-* Update static files (only production): ``python manage.py collectstatic``
-* Load new the languages fixtures as well as their configuration
- ``python manage.py loaddata languages`` and
- ``python manage.py loaddata language_config``
-* New config option in settings.py: ``WGER_SETTINGS['TWITTER']``. Set this if
- your instance has its own twitter account.
-
-New languages:
-
-* Norwegian (many thanks to Kjetil Elde `@w00p`_ `#304`_)
-* French (many thanks to all translators)
-
-New features:
-
-* Big ingredient list in Dutch, many thanks to alphafitness.club!
-* Add repetition (minutes, kilometer, etc.) and weight options (kg, lb, plates, until failure) to sets `#216`_ and `#217`_
-* Allow administrators to deactivate the guest user account `#330`_
-* Add option to show the gym name in the header instead of the application name, part of `#214`_
-* Exercise names are now capitalized, making them more consistent `#232`_
-* Much improved landing page (thanks `@DeveloperMal`_) `#307`_
-* Add extended PDF options to schedules as well (thanks `@alelevinas`_ ) `#272`_
-* Show trained secondary muscles in workout view (thanks `@alokhan`_ ) `#282`_
-* Use the metricsgraphics library to more easily draw charts `#188`_
-* Removed persona (browserID) as a login option, the service is being discontinued `#331`_
-
-Improvements:
-
-* Check and enforce style guide for JS files `#317`_ (`@petervanderdoes`_)
-* BMI calculator now works with pounds as well (thanks `@petervanderdoes`_) `#318`_
-* Give feedback when autocompleter didn't find any results `#293`_
-* Make exercise names links to their detail page in training log pages `#350`_
-* Better GUI consistency in modal dialogs (thanks `@jstoebel`_ ) `#274`_
-* Cache is cleared when editing muscles (thanks `@RyanSept`_ `@pythonGeek`_ ) `#260`_
-* Fields in workout log form are no longer required, making it possible to only log weight for certain exercises `#334`_
-* New, more verbose, API endpoint for exercises, (thanks `@andela-bmwenda`_)
-* The dashboard page was improved and made more user friendly `#201`_ (partly)
-* Replace jquery UI's autocompleter and sortable this reduces the size of JS and CSS `#78`_ and `#79`_
-* Update to D3js v4 `#314`_, `#302`_
-* Remove hard-coded CC licence from documentation and website `#247`_
-
-Other improvements and bugfixes: `#25`_, `#243`_, `#279`_, `#275`_, `#270`_,
-`#258`_, `#257`_, `#263`_, `#269`_, `#296`_, `#297`_, `#303`_, `#311`_, `#312`_,
-`#313`_, `#322`_, `#324`_, `#325`_
-
-
-.. _#25: https://github.com/wger-project/wger/issues/25
-.. _#78: https://github.com/wger-project/wger/issues/78
-.. _#79: https://github.com/wger-project/wger/issues/79
-.. _#188: https://github.com/wger-project/wger/issues/188
-.. _#201: https://github.com/wger-project/wger/issues/201
-.. _#214: https://github.com/wger-project/wger/issues/214
-.. _#216: https://github.com/wger-project/wger/issues/216
-.. _#217: https://github.com/wger-project/wger/issues/217
-.. _#232: https://github.com/wger-project/wger/issues/232
-.. _#243: https://github.com/wger-project/wger/issues/243
-.. _#248: https://github.com/wger-project/wger/issues/248
-.. _#247: https://github.com/wger-project/wger/issues/247
-.. _#260: https://github.com/wger-project/wger/issues/260
-.. _#263: https://github.com/wger-project/wger/issues/263
-.. _#269: https://github.com/wger-project/wger/issues/269
-.. _#272: https://github.com/wger-project/wger/issues/272
-.. _#274: https://github.com/wger-project/wger/issues/274
-.. _#282: https://github.com/wger-project/wger/issues/282
-.. _#293: https://github.com/wger-project/wger/issues/293
-.. _#296: https://github.com/wger-project/wger/issues/296
-.. _#297: https://github.com/wger-project/wger/issues/297
-.. _#302: https://github.com/wger-project/wger/issues/302
-.. _#303: https://github.com/wger-project/wger/issues/303
-.. _#304: https://github.com/wger-project/wger/issues/304
-.. _#307: https://github.com/wger-project/wger/issues/307
-.. _#311: https://github.com/wger-project/wger/issues/311
-.. _#312: https://github.com/wger-project/wger/issues/312
-.. _#313: https://github.com/wger-project/wger/issues/313
-.. _#314: https://github.com/wger-project/wger/issues/314
-.. _#317: https://github.com/wger-project/wger/issues/317
-.. _#318: https://github.com/wger-project/wger/issues/318
-.. _#322: https://github.com/wger-project/wger/issues/322
-.. _#324: https://github.com/wger-project/wger/issues/324
-.. _#325: https://github.com/wger-project/wger/issues/325
-.. _#330: https://github.com/wger-project/wger/issues/330
-.. _#331: https://github.com/wger-project/wger/issues/331
-.. _#334: https://github.com/wger-project/wger/issues/334
-.. _#350: https://github.com/wger-project/wger/issues/350
-.. _@petervanderdoes: https://github.com/petervanderdoes
-.. _@DeveloperMal: https://github.com/DeveloperMal
-.. _@alelevinas: https://github.com/alelevinas
-.. _@jstoebel: https://github.com/jstoebel
-.. _@alokhan: https://github.com/alokhan
-.. _@w00p: https://github.com/w00p
-.. _@andela-bmwenda: https://github.com/andela-bmwenda
-.. _@RyanSept: https://github.com/RyanSept
-.. _@pythonGeek: https://github.com/pythonGeek
-
-
-
-1.7
----
-**2016-02-28**
-
-New translations:
-
-* Czech (many thanks to Tomáš Z.!)
-* Swedish (many thanks to ywecur!)
-
-
-New features:
-
-* Workout PDF can now print the exercises' images and comments `#261`_
-* Allow login with username or email (thanks `@warchildmd`_) #164`_
-* Correctly use user weight when calculating nutritional plans' calories (thanks `@r-hughes`_) `#210`_
-* Fix problem with datepicker `#192`_
-* Order of exercises in supersets is not reverted anymore `#229`_
-* Improvements to the gym management:
-
- * Allow to add contracts to members
- * Visual consistency for lists and actions
- * Vastly reduce the number of database queries in gym member list `#144`_
- * Global list of users for installation `#212`_
- * Allow administrators to restrict user registration `#220`_
- * Refactored and improved code, among others `#208`_
- * Allow gym managers to reset a member's password `#186`_
-
-* Better rendering of some form elements `#244`_
-* Improved GUI consistency `#149`_
-* Docker images for easier installation `#181`_
-* Use hostname for submitted exercises (thanks `@jamessimas`_) `#159`_
-* Download js libraries with bowerjs (thanks `@tranbenny`_) `#126`_
-* Improved and more flexible management commands `#184`_
-* Fixed error when importin weight entries from CSV (thanks `@r-hughes`_) `#204`_
-* Fixed problems when building and installing the application on Windows (thanks `@romansp`_) `#197`_
-* Fixed potential Denial Of Service attack (thanks `@r-hughes`_) `#238`_
-* Dummy data generator can not create nutrition plans (thanks `@cthare`_) `#241`_
-
-
-Other improvements and bugfixes: `#279`_, `#275`_, `#270`_, `#258`_, `#257`_
-
-
-.. _#126: https://github.com/wger-project/wger/issues/126
-.. _#144: https://github.com/wger-project/wger/issues/144
-.. _#149: https://github.com/wger-project/wger/issues/149
-.. _#159: https://github.com/wger-project/wger/issues/159
-.. _#164: https://github.com/wger-project/wger/issues/164
-.. _#181: https://github.com/wger-project/wger/issues/181
-.. _#184: https://github.com/wger-project/wger/issues/184
-.. _#186: https://github.com/wger-project/wger/issues/186
-.. _#192: https://github.com/wger-project/wger/issues/192
-.. _#197: https://github.com/wger-project/wger/issues/197
-.. _#204: https://github.com/wger-project/wger/issues/204
-.. _#208: https://github.com/wger-project/wger/issues/208
-.. _#210: https://github.com/wger-project/wger/issues/210
-.. _#212: https://github.com/wger-project/wger/issues/212
-.. _#229: https://github.com/wger-project/wger/issues/229
-.. _#220: https://github.com/wger-project/wger/issues/220
-.. _#238: https://github.com/wger-project/wger/issues/238
-.. _#241: https://github.com/wger-project/wger/issues/241
-.. _#244: https://github.com/wger-project/wger/issues/244
-.. _#257: https://github.com/wger-project/wger/issues/257
-.. _#258: https://github.com/wger-project/wger/issues/258
-.. _#261: https://github.com/wger-project/wger/issues/261
-.. _#270: https://github.com/wger-project/wger/issues/270
-.. _#275: https://github.com/wger-project/wger/issues/275
-.. _#279: https://github.com/wger-project/wger/issues/279
-.. _@jamessimas: https://github.com/jamessimas
-.. _@r-hughes: https://github.com/r-hughes
-.. _@romansp: https://github.com/romansp
-.. _@cthare: https://github.com/cthare
-.. _@warchildmd: https://github.com/warchildmd
-.. _@tranbenny: https://github.com/tranbenny
-
-
-1.6.1
------
-**2015-07-25**
-
-Bugfix release
-
-
-1.6
----
-**2015-07-25**
-
-New translations:
-
-* Greek (many thanks to Mark Nicolaou!)
-
-New features:
-
-* Save planed weight along with the repetitions `#119`_
-* Improvements to the workout calendar `#98`_
-* Allow external access to workouts and other pages to allow for sharing `#102`_, `#124`_
-* Email reminder to regularly enter (body) weight entries `#115`_
-* Allow users to submit corrections to exercises
-* Add day detail view in workout calendar `#103`_
-* Fix bug where the exercises added to a superset did not remain sorted `#89`_
-* Reduce the size of generated HTML code `#125`_
-* Allow users to copy shared workouts from others `#127`_
-* Added breadbrumbs, to make navigation easier `#101`_
-* Add option to delete workout sessions and their logs `#156`_
-* Improve installation, development and maintenance documentation `#114`_
-
-Other improvements and bugfixes:
-`#99`_, `#100`_, `#106`_, `#108`_, `#110`_, `#117`_, `#118`_, `#128`_, `#131`_,
-`#135`_, `#145`_, `#155`_
-
-
-
-.. _#89: https://github.com/wger-project/wger/issues/89
-.. _#98: https://github.com/wger-project/wger/issues/98
-.. _#99: https://github.com/wger-project/wger/issues/99
-.. _#100: https://github.com/wger-project/wger/issues/100
-.. _#101: https://github.com/wger-project/wger/issues/101
-.. _#102: https://github.com/wger-project/wger/issues/102
-.. _#103: https://github.com/wger-project/wger/issues/103
-.. _#106: https://github.com/wger-project/wger/issues/106
-.. _#108: https://github.com/wger-project/wger/issues/108
-.. _#110: https://github.com/wger-project/wger/issues/110
-.. _#114: https://github.com/wger-project/wger/issues/114
-.. _#115: https://github.com/wger-project/wger/issues/115
-.. _#117: https://github.com/wger-project/wger/issues/117
-.. _#118: https://github.com/wger-project/wger/issues/118
-.. _#119: https://github.com/wger-project/wger/issues/119
-.. _#124: https://github.com/wger-project/wger/issues/124
-.. _#125: https://github.com/wger-project/wger/issues/125
-.. _#127: https://github.com/wger-project/wger/issues/127
-.. _#128: https://github.com/wger-project/wger/issues/128
-.. _#131: https://github.com/wger-project/wger/issues/131
-.. _#135: https://github.com/wger-project/wger/issues/135
-.. _#145: https://github.com/wger-project/wger/issues/145
-.. _#155: https://github.com/wger-project/wger/issues/155
-.. _#156: https://github.com/wger-project/wger/issues/156
-
-
-1.5
----
-**2014-12-16**
-
-New Translations:
-
-* Dutch (many thanks to David Machiels!)
-* Portuguese (many thanks to Jefferson Campos!) `#97`_
-
-
-New features:
-
-* Add support for gym management `#85`_
-
- * Gym managers can create and manage gyms
- * Trainers can see the gym's users and their routines
-
-* Reduce the amount of CSS and JS libraries by using bootstrap as much as possible `#73`_
-* Improvements to the REST API `#75`_
-
- * Add read-write access
- * Add live browsing of the API with django rest framework
- * Improve documentation
- * /api/v1 is marked deprecated
-
-* Show exercise pictures in workout as well
-* Detailed view of exercises and workouts in schedule `#86`_
-* Support for both metric (kg) and imperial (lb) weight units `#105`_
-* Allow the user to delete his account and data `#84`_
-* Add contact field to feedback form
-* Cleanup translation strings `#94`_
-* Python 3 compatibility! `#68`_
-
-Other improvements and bugfixes:
-`#51`_, `#76`_, `#80`_, `#81`_, `#82`_, `#91`_, `#92`_, `#95`_, `#96`_
-
-
-.. _#51: https://github.com/wger-project/wger/issues/51
-.. _#68: https://github.com/wger-project/wger/issues/68
-.. _#73: https://github.com/wger-project/wger/issues/73
-.. _#75: https://github.com/wger-project/wger/issues/75
-.. _#76: https://github.com/wger-project/wger/issues/76
-.. _#80: https://github.com/wger-project/wger/issues/80
-.. _#81: https://github.com/wger-project/wger/issues/81
-.. _#82: https://github.com/wger-project/wger/issues/82
-.. _#84: https://github.com/wger-project/wger/issues/84
-.. _#85: https://github.com/wger-project/wger/issues/85
-.. _#86: https://github.com/wger-project/wger/issues/86
-.. _#91: https://github.com/wger-project/wger/issues/91
-.. _#92: https://github.com/wger-project/wger/issues/92
-.. _#94: https://github.com/wger-project/wger/issues/94
-.. _#95: https://github.com/wger-project/wger/issues/95
-.. _#96: https://github.com/wger-project/wger/issues/96
-.. _#97: https://github.com/wger-project/wger/issues/97
-.. _#105: https://github.com/wger-project/wger/issues/105
-
-
-1.4
----
-
-**2014-03-08**
-
-New features and bugfixes:
-
- * Calendar view to more easily check workout logs
- * Add "gym mode" with timer to log the workout while at the gym
- * Add automatic email reminders for new workouts
- * New iCal export to add workouts and schedules e.g. to google calendar
- * New exercise overview, grouped by equipment
- * Add possibility to write comments and rate the workout
- * Simplify form for new exercises
- * Alternative PDF export of workout without table for entering logs
- * Unified way of specifying license of submitted content (exercises, etc.)
-
-
-
-1.3
----
-
-**2013-11-27**
-
-
-New translations:
-
- * Bulgarian (many thanks to Lyuboslav Petrov!)
- * Russian (many thanks to Inna!)
- * Spanish
-
-New features and bugfixes:
-
- * Mobile version of website
- * Add images to the exercises
- * Exercises now can list needed equipment (barbell, etc.)
- * BMI calculator
- * Daily calories calculator
- * New management utility for languages
- * Improved performance
- * RESTful API
-
-
-
-1.2
----
-**2013-05-19**
-
-New features and bugfixes:
-
- * Added scheduling option for workouts.
- * Open all parts of website to all users, this is done by a custom middleware
- * Regular users can submit exercises and ingredients to be included in the general list
- * Add more 'human' units to ingredients like '1 cup' or '1 slice'
- * Add nutritional values calculator on the ingredient detail page
- * Several bugfixes
- * Usability improvements
-
-
-1.1.1
------
-**2013-03-06**
-
-
-New features and bugfixes:
-
- * Pin version of app django_browserid due to API changes in 0.8
- * Fix issue with tabs on exercise overview due to API changes in JQuery
-
-
-1.1
----
-**2013-02-23**
-
-New features and bugfixes:
-
- * Better navigation bar
- * Added descriptions for the exercises (German)
- * New workout logbook, to keep track of your improvements
- * Import your weight logs from a spreadsheet (CSV-Import)
- * Better filtering for weight chart
- * Muscle overview with corresponding exercises
- * Add guest accounts by generating a temporary user
- * Description pages about the software
- * Easier installation process
-
-
-1.0.3
------
-**2012-11-19**
-
-
-New features and bugfixes:
-
- * Add option to copy (duplicate) workouts and nutritional plans
- * Login without an account with Mozilla's Persona (BrowserID)
- * Better AJAX handling of the modal dialogs, fewer page reloads and redirects
- * Expand the list of ingredients in German
- * Add pagination to the ingredient list
- * Improvements to user page:
-
- * Add a "reset password" link to the login page
- * Email is now user-editable
-
- * More natural lines in weight chart with cubic interpolation
-
-
-1.0.2
------
-**2012-11-02**
-
-Bugfix release
-
-
-1.0.1
------
-**2012-11-02**
-
-
-New features and bugfixes:
-
- * Fix issue with password change
- * Small improvements to UI
- * Categories editable/deletable from the exercise overview page
- * Exercise AJAX search groups by category
- * More tests!
- * Use generic views for editing, creating and deleting objects
-
-
-1.0
----
-**2012-10-16**
-
-Initial release.
-
-New features and bugfixes:
-
- * Workout manager
- * PDF output for logging progress
- * Initial data with the most popular exercises
- * Simple weight chart
- * Nutrition plan manager
- * Simple PDF output
- * Initial data with nutritional values from the USDA
diff --git a/docs/codingstyle.rst b/docs/codingstyle.rst
deleted file mode 100644
index b71f7abe9..000000000
--- a/docs/codingstyle.rst
+++ /dev/null
@@ -1,27 +0,0 @@
-.. _codingstyle:
-
-Coding Style Guide
-==================
-
-Python
-------
-
-Code according to PEP8, but with a maximum line length of 100.
-
-
-JavaScript
-----------
-
-* Follow Airbnb ES5 style guide, with the following changes:
-
- * Disallow named function expressions, except in recursive functions, where a name is needed.
- * Console logging is allowed
-
-* Functions called from Django templates need to start with ``wger``
-
-
-Automatic coding style checks
------------------------------
-
-The coding style is automatically checked by GitHub actions after sending a
-pull request.
diff --git a/docs/commands.rst b/docs/commands.rst
deleted file mode 100644
index 020e767f3..000000000
--- a/docs/commands.rst
+++ /dev/null
@@ -1,299 +0,0 @@
-Commands
-========
-
-Please note that the administration commands are intended e.g. to bootstrap/install
-an application to a new system, while the management ones are made to administer a
-running application (to e.g. delete guest users, send emails, etc.).
-
-Administration Commands
------------------------
-
-The application provides several administration and bootstrapping commands that
-can be passed to the ``wger`` command::
-
- wger <command>
-
-
-You can get a list of all available commands by calling ``wger`` without any
-arguments::
-
- Available tasks:
-
- bootstrap Performs all steps necessary to bootstrap the application
- config-location Returns the default location for the settings file and the data folder
- create-or-reset-admin Creates an admin user or resets the password for an existing one
- create-settings Creates a local settings file
- load-fixtures Loads all fixtures
- load-online-fixtures Downloads fixtures from server and installs them (at the moment only ingredients)
- migrate-db Run all database migrations
- start Start the application using django's built-in webserver
-
-You can also get help on a specific command with ``wger --help <command>``.
-
-.. note::
- Most commands support a ``--settings-path`` command line option that sets the
- settings file to use for the operation. If you use it, it is recommended to
- use absolute paths, for example::
-
- wger bootstrap --settings-path /path/to/development/wger/settings-test.py
-
-
-
-Bootstrap
-~~~~~~~~~
-
-Command: **bootstrap**
-
-This command bootstraps the application: it creates a settings file, initialises
-a SQLite database, loads all necessary fixtures for the application to work and
-creates a default administrator user. While it can also work with e.g. a PostgreSQL
-database, you will need to create it yourself::
-
- wger bootstrap
-
-The most usual use-case is creating the settings file and the SQLite database to
-their default locations, but you can set your own paths if you want e.g. start
-developing on a branch that is going to change the database schema.
-
-Usage::
-
- Usage: inv[oke] [--core-opts] bootstrap [--options] [other tasks here ...]
-
- Docstring:
- Performs all steps necessary to bootstrap the application
-
- Options:
- -a STRING, --address=STRING Address to use. Default: localhost
- -b, --browser Whether to open the application in a browser window. Default: false
- -d STRING, --database-path=STRING Path to SQLite database (absolute path recommended). Leave empty for default
- -p, --port Port to use. Default: 8000
- -s STRING, --settings-path=STRING Path to settings file (absolute path recommended). Leave empty for default
-
-
-Start wger
-~~~~~~~~~~
-
-Command: **start**
-
-Starts an already installed application::
-
- wger start
-
-Please note that this is simply a comfort function and does not use any *magic*,
-it simply calls Django's development server and (optionally) opens a browser
-window. If you are developing, using the usual ``python manage.py runserver``
-is probably better.
-
-Usage::
-
- Usage: inv[oke] [--core-opts] start [--options] [other tasks here ...]
-
- Docstring:
- Start the application using django's built in webserver
-
- Options:
- -a STRING, --address=STRING Address to bind to. Default: localhost
- -b, --browser Whether to open the application in a browser window. Default: false
- -e STRING, --extra-args=STRING Additional arguments to pass to the builtin server. Pass as string: "--arg1 --arg2=value". Default: none
- -p, --port Port to use. Default: 8000
- -s STRING, --settings-path=STRING Path to settings file. Leave empty for default
- -t, --[no-]start-server Whether to start the development server. Default: true
-
-
-Default locations
-~~~~~~~~~~~~~~~~~
-
-Command: **config-location**
-
-Information command that simply outputs the default locations for the settings
-file as well as the data folder used for the SQLite database and the uploaded
-files.
-
-
-Create settings
-~~~~~~~~~~~~~~~
-
-Command: **create-settings**
-
-Creates a new settings file-based. If you call it without further arguments it
-will create the settings in the default locations::
-
- wger create-settings
-
-If you pass custom paths, it's recommended to use absolute paths::
-
- wger create-settings --settings-path /path/to/development/wger/settings-test.py --database-path /path/to/development/wger/database-test.sqlite
-
-
-Usage::
-
- Usage: inv[oke] [--core-opts] create-settings [--options] [other tasks here ...]
-
- Docstring:
- Creates a local settings file
-
- Options:
- -a STRING, --database-type=STRING Database type to use. Supported: SQLite3, postgresql. Default: SQLite3
- -d STRING, --database-path=STRING Path to SQLite database (absolute path recommended). Leave empty for default
- -k, --key-length Lenght of the generated secret key. Default: 50
- -s STRING, --settings-path=STRING Path to settings file (absolute path recommended). Leave empty for default
- -u STRING, --url=STRING
-
-
-
-Create or reset admin
-~~~~~~~~~~~~~~~~~~~~~
-
-Command: **create-or-reset-admin**
-
-Makes sure that the default administrator user exists. If you change the password,
-it is reset.
-
-
-Usage::
-
- Usage: inv[oke] [--core-opts] create-or-reset-admin [--options] [other tasks here ...]
-
- Docstring:
- Creates an admin user or resets the password for an existing one
-
- Options:
- -s STRING, --settings-path=STRING Path to settings file (absolute path recommended). Leave empty for default
-
-
-
-Migrate database
-~~~~~~~~~~~~~~~~
-
-Command: **migrate-db**
-
-Migrates the database schema. This command is called internally when installing
-the application. The only need to call this explicitly is after installing a new
-version of the application.
-
-Calling this command is a safe operation, if your database is current, nothing
-will happen.
-
-
-Usage::
-
- Usage: inv[oke] [--core-opts] migrate-db [--options] [other tasks here ...]
-
- Docstring:
- Run all database migrations
-
- Options:
- -s STRING, --settings-path=STRING Path to settings file (absolute path recommended). Leave empty for default
-
-
-
-Load fixtures
-~~~~~~~~~~~~~
-
-Command: **load-fixtures**
-
-Loads all fixture files with the default data. This data includes all data necessary
-for the application to work such as:
-
-* exercises, muscles, equipment
-* ingredients, units
-* languages
-* permission groups
-* etc.
-
-Note that ingredients are not included and need to be installed separately with
-download-online-fixtures.
-
-This command is called internally when installing the application but you can use
-it to reset the data to the original state. Note: new entries or user entries such
-as workouts are *not* reset with this, only the application data.
-
-Usage::
-
- Usage: inv[oke] [--core-opts] load-fixtures [--options] [other tasks here ...]
-
- Docstring:
- Loads all fixtures
-
- Options:
- -s STRING, --settings-path=STRING Path to settings file (absolute path recommended). Leave empty for default
-
-
-Load online fixtures
-~~~~~~~~~~~~~~~~~~~~
-
-Command: **load-online-fixtures**
-
-Downloads ingredient and weight units fixtures and installs them. They are not
-included in the repository due to size.
-
-This command is called internally when installing the application but you can use
-it to reset the data to the original state. Note: new entries or user entries such
-as workouts are *not* reset with this, only the application data.
-
-Usage::
-
- Usage: inv[oke] [--core-opts] load-online-fixtures [--options] [other tasks here ...]
-
- Docstring:
- Downloads fixtures from server and installs them (at the moment only ingredients)
-
- Options:
- -s STRING, --settings-path=STRING Path to settings file (absolute path). Leave empty for default
-
-
-Management commands
--------------------
-
-wger also implements a series of Django commands that perform different
-management functions that are sometimes needed. Call them with
-``python manage.py <command_name>``:
-
-**download-exercise-images**
- synchronizes the exercise images from wger.de to the local installation. Read
- its help text as it could save the wrong image to the wrong exercise should
- different IDs match.
-
-**redo-capitalize-names**
- re-calculates the capitalized exercise names. This command can be called if the
- current "smart" capitalization algorithm is changed. This is a safe operation
- since the original names (as entered by the user) are still available.
-
-**submitted-exercises**
- simply prints a list of user-submitted exercises
-
-**extract-i18n**
- extract strings from the database that have to be inserted manually in the PO
- file when translating. These include e.g. exercise categories.
-
-**clear-cache**
- clears different application caches. Might be needed after some updates or
- just useful while testing. Please note that you must select what caches to
- clear.
-
-**update-user-cache**
- update the user cache-table. This command is only needed when the python code
- used to calculate any of the cached entries is changed and the ones in the
- database need to be updated to reflect the new logic.
-
-
-
-Cron
-~~~~
-
-The following commands are built to be called regularly, via a cronjob or
-similar
-
-**delete-temp-users**
- deletes all guest users older than 1 week. At the moment this value can't be
- configured
-
-**email-reminders**
- sends out email reminders for a user that need to create a new workout.
-
-**email-weight-reminders**
- sends out email reminders for a user that need to enter a new (body) weight entry.
-
-**inactive-members**
- Sends email for gym members that have not been to the gym for a specified
- amount of weeks.
diff --git a/docs/conf.py b/docs/conf.py
deleted file mode 100644
index 4b4c2149a..000000000
--- a/docs/conf.py
+++ /dev/null
@@ -1,262 +0,0 @@
-# -*- coding: utf-8 -*-
-
-#
-# wger Workout Manager documentation build configuration file, created by
-# sphinx-quickstart on Mon Dec 1 22:22:02 2014.
-#
-# This file is execfile()d with the current directory set to its
-# containing dir.
-#
-# Note that not all possible configuration values are present in this
-# autogenerated file.
-#
-# All configuration values have a default; values that are commented out
-# serve to show the default.
-
-import sys
-import os
-
-# If extensions (or modules to document with autodoc) are in another directory,
-# add these directories to sys.path here. If the directory is relative to the
-# documentation root, use os.path.abspath to make it absolute, like shown here.
-#sys.path.insert(0, os.path.abspath('.'))
-
-# -- General configuration ------------------------------------------------
-
-# If your documentation needs a minimal Sphinx version, state it here.
-#needs_sphinx = '1.0'
-
-# Add any Sphinx extension module names here, as strings. They can be
-# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
-# ones.
-extensions = [
- 'sphinx.ext.autodoc',
- 'sphinx.ext.doctest',
-]
-
-# Add any paths that contain templates here, relative to this directory.
-templates_path = ['_templates']
-
-# The suffix of source filenames.
-source_suffix = '.rst'
-
-# The encoding of source files.
-#source_encoding = 'utf-8-sig'
-
-# The master toctree document.
-master_doc = 'index'
-
-# General information about the project.
-project = 'wger Workout Manager'
-copyright = '2020, Roland Geider'
-
-# The version info for the project you're documenting, acts as replacement for
-# |version| and |release|, also used in various other places throughout the
-# built documents.
-#
-# The short X.Y version.
-version = '2.1'
-# The full version, including alpha/beta/rc tags.
-release = '2.1 alpha'
-
-# The language for content autogenerated by Sphinx. Refer to documentation
-# for a list of supported languages.
-#language = None
-
-# There are two options for replacing |today|: either, you set today to some
-# non-false value, then it is used:
-#today = ''
-# Else, today_fmt is used as the format for a strftime call.
-#today_fmt = '%B %d, %Y'
-
-# List of patterns, relative to source directory, that match files and
-# directories to ignore when looking for source files.
-exclude_patterns = ['_build']
-
-# The reST default role (used for this markup: `text`) to use for all
-# documents.
-#default_role = None
-
-# If true, '()' will be appended to :func: etc. cross-reference text.
-#add_function_parentheses = True
-
-# If true, the current module name will be prepended to all description
-# unit titles (such as .. function::).
-#add_module_names = True
-
-# If true, sectionauthor and moduleauthor directives will be shown in the
-# output. They are ignored by default.
-#show_authors = False
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
-
-# A list of ignored prefixes for module index sorting.
-#modindex_common_prefix = []
-
-# If true, keep warnings as "system message" paragraphs in the built documents.
-#keep_warnings = False
-
-
-# -- Options for HTML output ----------------------------------------------
-
-# The theme to use for HTML and HTML Help pages. See the documentation for
-# a list of builtin themes.
-html_theme = 'default'
-
-# Theme options are theme-specific and customize the look and feel of a theme
-# further. For a list of options available for each theme, see the
-# documentation.
-#html_theme_options = {}
-
-# Add any paths that contain custom themes here, relative to this directory.
-#html_theme_path = []
-
-# The name for this set of Sphinx documents. If None, it defaults to
-# "<project> v<release> documentation".
-#html_title = None
-
-# A shorter title for the navigation bar. Default is the same as html_title.
-#html_short_title = None
-
-# The name of an image file (relative to this directory) to place at the top
-# of the sidebar.
-#html_logo = None
-
-# The name of an image file (within the static path) to use as favicon of the
-# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32
-# pixels large.
-#html_favicon = None
-
-# Add any paths that contain custom static files (such as style sheets) here,
-# relative to this directory. They are copied after the builtin static files,
-# so a file named "default.css" will overwrite the builtin "default.css".
-html_static_path = ['_static']
-
-# Add any extra paths that contain custom files (such as robots.txt or
-# .htaccess) here, relative to this directory. These files are copied
-# directly to the root of the documentation.
-#html_extra_path = []
-
-# If not '', a 'Last updated on:' timestamp is inserted at every page bottom,
-# using the given strftime format.
-#html_last_updated_fmt = '%b %d, %Y'
-
-# If true, SmartyPants will be used to convert quotes and dashes to
-# typographically correct entities.
-#html_use_smartypants = True
-
-# Custom sidebar templates, maps document names to template names.
-#html_sidebars = {}
-
-# Additional templates that should be rendered to pages, maps page names to
-# template names.
-#html_additional_pages = {}
-
-# If false, no module index is generated.
-#html_domain_indices = True
-
-# If false, no index is generated.
-#html_use_index = True
-
-# If true, the index is split into individual pages for each letter.
-#html_split_index = False
-
-# If true, links to the reST sources are added to the pages.
-#html_show_sourcelink = True
-
-# If true, "Created using Sphinx" is shown in the HTML footer. Default is True.
-#html_show_sphinx = True
-
-# If true, "(C) Copyright ..." is shown in the HTML footer. Default is True.
-#html_show_copyright = True
-
-# If true, an OpenSearch description file will be output, and all pages will
-# contain a <link> tag referring to it. The value of this option must be the
-# base URL from which the finished HTML is served.
-#html_use_opensearch = ''
-
-# This is the file name suffix for HTML files (e.g. ".xhtml").
-#html_file_suffix = None
-
-# Output file base name for HTML help builder.
-htmlhelp_basename = 'wgerWorkoutManagerdoc'
-
-
-# -- Options for LaTeX output ---------------------------------------------
-
-latex_elements = {
-# The paper size ('letterpaper' or 'a4paper').
-#'papersize': 'letterpaper',
-
-# The font size ('10pt', '11pt' or '12pt').
-#'pointsize': '10pt',
-
-# Additional stuff for the LaTeX preamble.
-#'preamble': '',
-}
-
-# Grouping the document tree into LaTeX files. List of tuples
-# (source start file, target name, title,
-# author, documentclass [howto, manual, or own class]).
-latex_documents = [
- ('index', 'wgerWorkoutManager.tex', 'wger Workout Manager Documentation',
- 'Roland Geider', 'manual'),
-]
-
-# The name of an image file (relative to this directory) to place at the top of
-# the title page.
-#latex_logo = None
-
-# For "manual" documents, if this is true, then toplevel headings are parts,
-# not chapters.
-#latex_use_parts = False
-
-# If true, show page references after internal links.
-#latex_show_pagerefs = False
-
-# If true, show URL addresses after external links.
-#latex_show_urls = False
-
-# Documents to append as an appendix to all manuals.
-#latex_appendices = []
-
-# If false, no module index is generated.
-#latex_domain_indices = True
-
-
-# -- Options for manual page output ---------------------------------------
-
-# One entry per manual page. List of tuples
-# (source start file, name, description, authors, manual section).
-man_pages = [
- ('index', 'wgerworkoutmanager', 'wger Workout Manager Documentation',
- ['Roland Geider'], 1)
-]
-
-# If true, show URL addresses after external links.
-#man_show_urls = False
-
-
-# -- Options for Texinfo output -------------------------------------------
-
-# Grouping the document tree into Texinfo files. List of tuples
-# (source start file, target name, title, author,
-# dir menu entry, description, category)
-texinfo_documents = [
- ('index', 'wgerWorkoutManager', 'wger Workout Manager Documentation',
- 'Roland Geider', 'wgerWorkoutManager', 'One line description of project.',
- 'Miscellaneous'),
-]
-
-# Documents to append as an appendix to all manuals.
-#texinfo_appendices = []
-
-# If false, no module index is generated.
-#texinfo_domain_indices = True
-
-# How to display URL addresses: 'footnote', 'no', or 'inline'.
-#texinfo_show_urls = 'footnote'
-
-# If true, do not generate a @detailmenu in the "Top" node's menu.
-#texinfo_no_detailmenu = False
diff --git a/docs/development.rst b/docs/development.rst
deleted file mode 100644
index eb4bdb8e5..000000000
--- a/docs/development.rst
+++ /dev/null
@@ -1,58 +0,0 @@
-.. _development:
-
-Development
-===========
-
-Virtual environment
-~~~~~~~~~~~~~~~~~~~
-
-Create a new virtualenv::
-
- $ python3 -m venv venv-wger
- $ source venv-wger/bin/activate
-
-
-Get the code
-~~~~~~~~~~~~
-
-Download the source code::
-
- $ git clone https://github.com/wger-project/wger.git src
- $ cd src
-
-Install Requirements
-~~~~~~~~~~~~~~~~~~~~
-
-Install python requirements::
-
- $ pip install -r requirements_dev.txt
- $ python setup.py develop
-
-Install application
-~~~~~~~~~~~~~~~~~~~
-
-This will download the required JS and CSS libraries and create an SQLite
-database and populate it with data on the first run::
-
-
- $ wger create-settings
- $ wger bootstrap
- $ wger load-online-fixtures
-
-You can of course also use other databases such as PostgreSQL or MariaDB. Create
-a database and user and edit the DATABASES settings before calling bootstrap.
-Take a look at the :ref:`prod_postgres` on apache on how that could look like.
-
-Start the server
-----------------
-
-After the first run you can just use Django's development server::
-
- $ python manage.py runserver
-
-That's it. You can log in with the default administrator user:
-
-* **username**: admin
-* **password**: adminadmin
-
-You can reset the admin's password with ``wger create-or-reset-admin``.
diff --git a/docs/docker.rst b/docs/docker.rst
deleted file mode 100644
index 9580ca4e5..000000000
--- a/docs/docker.rst
+++ /dev/null
@@ -1,66 +0,0 @@
-Docker images
-=============
-
-There are docker files available to quickly get a version of wger up and
-running. They are all located under ``extras/docker`` if you want to build
-them yourself.
-
-Note that you need to build from the project's source folder, e.g::
-
- docker build -f extras/docker/development/Dockerfile -t wger/server .
- docker build -f extras/docker/demo/Dockerfile --tag wger/demo .
-
-
-Demo
-----
-
-Self contained demo image
-
-Get the image::
-
- docker pull wger/demo
-
-Run a container and start the application::
-
- docker run -ti --name wger.demo --publish 8000:80 wger/demo
-
-
-Then just open http://localhost:8000 and log in as: **admin**, password **adminadmin**
-
-
-Development
------------
-
-This image installs the application using virtualenv, uses an SQLite database
-and serves it with Django's development server.
-
-Get the image::
-
- docker pull wger/server
-
-Run a container and start the application::
-
- docker run -ti --name wger.dev --publish 8000:8000 wger/server
- (in docker) source ~/venv/bin/activate
- (in docker) python manage.py runserver 0.0.0.0:8000
-
-Then just open http://localhost:8000 and log in as: **admin**, password **adminadmin**
-
-As an alternative, you might want to map a local folder to the container.
-This is interesting if e.g. you want to keep the wger source code on
-your host machine and use docker only to serve it. Then do this::
-
- docker run -ti \
- --name wger.test1 \
- --publish 8005:8000 \
- --volume /path/to/local/wger/:/home/wger/src \
- wger/server
-
-It will mount the local path *on top* of the folder in the container. For this to
-work you obviously need to manually checkout the code to ``/path/to/local/wger/``
-and create a settings file as well.
-
-Production
-----------
-
-The production docker compose setup can be found here: https://github.com/wger-project/docker
diff --git a/docs/gym.rst b/docs/gym.rst
deleted file mode 100644
index 7b07747da..000000000
--- a/docs/gym.rst
+++ /dev/null
@@ -1,126 +0,0 @@
-.. _gym:
-
-Gym administration
-------------------
-
-wger provides support for managing both gyms and members. For example,
-trainers/coaches can follow their students progress, and gym managers are
-able to keep track of their members contracts.
-
-If the installation is being used for a single gym, you can set the
-default gym in the global configuration options in the gym list. This will
-update all existing users as well as newly registered ones so they belong
-to that gym.
-
-
-There are 3 groups used for the different administrative roles:
-
-* **General Manager:** Can manage (add, edit, delete) the different gyms for the
- installation as well as add gym managers, trainers, and members but is not
- allowed to see the members' workout data.
-* **Gym Manager:** Can manage the users for a single gym (editing, deactivating,
- and adding contracts, etc.).
-* **Trainer:** Can manage the workouts and other data for the members of a
- single gym.
-
-
-
-These roles are not mutually exclusive, if your workflow demands it, you can
-combine all three roles into one account.
-
-Except for general managers, administrative users belong to a single gym (the
-one they were created in) and can access only those members. This setting cannot
-be changed later. The user's gym appears in the top-right menu.
-
-Member Management
------------------
-To add members to a gym:
-
-1. Click the ``Add Member`` button at the top of the member overview.
-2. Fill in the form to generate a password for the user.
-3. Save this password and give it to the user and it cannot be retrieved later.
-
- OR
-
-1. Click the ``Add Member`` button at the top of the member overview.
-2. Instruct new members to use the reset password links when logging in for the first time.
-
-
-To export all gym members:
-
-1. Navigate to the ``Actions`` button on the gym detail page.
-2. Here, you are provided with a CSV file that can be imported into a spreadsheet program for further processing.
-
-
-Trainers can click on a user and access an overview of the user's workouts,
-body weights, nutrition plans, etc. When clicking on the "log in as this user",
-the trainer can assume the identity of the user to create new workouts for
-example.
-Additionally, Trainers can add notes and upload documents related to individual members. A
-note is a free text, while a document can be any file. This information can
-be used to save information on specific injuries or other important notes
-related to the member. Note that these entries are not accessible by the
-members themselves, but only by the trainers.
-
-Individual members can be deactivated by clicking on the "actions" button on
-the top of the member's detail table. Deactivated users can't log in, but are
-not deleted from the system and can be reactivated at any time in the future.
-If you wish to completely delete a user from the system, use the "delete"
-option but keep in mind that this action cannot be undone.
-
-
-Contracts
----------
-
-It is also possible to manage the members' contracts with the application. A
-contract is composed of a base form and optional *type* and *options*. The type
-is a single attribute, such as "Student contract" or "Special offer 2016". The
-options are basically the same but more than one can be selected at once and
-can be used for items that can e.g. be booked in addition to the default
-contract such as "Sauna" or "Protein drink flatrate".
-
-The types and the options are added gym-wide in the member overview by the
-managers. Once these are saved, they can be used when adding or editing a
-contract to a specific user.
-
-
-E-Mails
------------
-You can send a batch e-mail to all members of a gym. Currently, there is no support
-for filtering members based on specific criterion.
-
-
-How to send e-mails:
-
-1. Navigate to the gym's overview and click "Add" on the Email actions button.
-2. Fill in the subject and the body.
-3. Review, and accept the e-mail's preview.
-4. After submitting, emails will be delivered in batch format based on your cron jobs configuration.
-
-
-Configuration
--------------
-
-Inactive members
-~~~~~~~~~~~~~~~~
-Inactive members are members that have not logged in for X weeks. For example, a trainer can check to
-see which users have not visited the gym in X weeks.
-
-This can be configured in the following ways:
-
-**Number of Weeks**
- The value in weeks after which users are considered inactive (default is 8).
- This applies to the whole gym and can be deactivated by entering a 0.
-
-**Trainer Configuration**
- Each trainer can opt-out of receiving such emails.
-
-**User Configuration**
- Individual users can be opt-out of being included in the reminder emails if
- they don't want to use the log for any other reason.
-
-Gym name in the header
-~~~~~~~~~~~~~~~~~~~~~~
-A checkbox to control whether the gym's name will appear in the header instead
-of the application's name for all logged-in users of this gym. This applies to
-members, trainers, and managers
diff --git a/docs/i18n.rst b/docs/i18n.rst
deleted file mode 100644
index bbc6e41da..000000000
--- a/docs/i18n.rst
+++ /dev/null
@@ -1,97 +0,0 @@
-.. _i18n:
-
-Internationalization (i18n)
-===========================
-
-Django
-------
-
-Updating the translation files
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-wger uses Django's translation infrastructure, but there are a couple of things
-that need to be considered. First, you need to extract some translatable strings
-from the database such as exercise categories and muscle names::
-
- python manage.py extract-i18n
-
-Then, update your po files with the usual Django command (run this in the wger
-sub folder, not the root one)::
-
- django-admin makemessages --all --extension py,html,tpl
-
-
-and finally, you can compile them with::
-
- django-admin compilemessages
-
-
-Adding new languages
-~~~~~~~~~~~~~~~~~~~~
-
-Besides adding the new translations to the locale folder, they have to be
-activated in the Django settings file and in the application itself.
-
-.. note::
- At the moment composed language codes such as pt-BR (Brazilian Portuguese)
- are **not** supported, the issue for this problem is `#130`_
-
-.. _#130: https://github.com/wger-project/wger/issues/130
-
-* **django:** add an entry to ``LANGUAGES`` in ``wger/settings_global.py``
-
-* **wger:** add the new language in the language admin page and set the
- visibility of exercises and ingredients. For the short name, use the
- language code such as 'fr', for the long name the native name, in this example
- 'français'.
-
-* **compile**: to use the new language files, the translation files have to be
- compiled. Do this by changing to the wger folder (so you see a ``locale``
- folder there) and invoking ``django-admin compilemessages``. You will also
- need to restart the webserver.
-
-* **flag icon:** add an appropriate flag icon in SVG format in ``images/icons/flag-CODE.svg``
- in the static folder of the core application.
-
-* **fixtures:** after having added the language in the admin module, the data
- has to be exported so the current language configuration can be reproduced.
- This is done with the ``filter-fixtures.py`` script:
-
- * while in ``extras/scripts``, export the whole database to a JSON file with::
-
- python ../../manage.py dumpdata --indent 4 --natural-foreign > data.json
-
- * filter the database dump, this will generate a json file for each "important"
- module::
-
- python filter-fixtures.py
-
- * copy the generated files ``languages.json`` and ``language_config.json`` to
- the fixtures folder in core and config (you'll probably want to delete the
- remaining JSON files)::
-
- cp languages.json ../../wger/core/fixtures/
- cp language_config.json ../../wger/config/fixtures/
- rm *.json
-
-
-Getting new languages
-~~~~~~~~~~~~~~~~~~~~~
-
-If you have a local installation and new languages arrive from upstream, you
-need to load the necessary data to the language tables in the database (note
-that you'll need to reload/restart the webserver so the new po files are picked
-up)::
-
- python manage.py loaddata languages
- python manage.py loaddata language_config
-
-Please note that this will overwrite any changes you might have done from the
-language administration module.
-
-
-React
------
-
-The frontend that is built with react uses its own translation files. See
-the README.md file in the locale folder in the react repo for more information.
diff --git a/docs/index.rst b/docs/index.rst
deleted file mode 100644
index 489bdda4b..000000000
--- a/docs/index.rst
+++ /dev/null
@@ -1,89 +0,0 @@
-.. wger Workout Manager documentation master file, created by
- sphinx-quickstart on Mon Dec 1 22:22:02 2014.
- You can adapt this file completely to your liking, but it should at least
- contain the root `toctree` directive.
-
-Welcome to wger Workout Manager's documentation!
-================================================
-
-wger (ˈvɛɡɐ) Workout Manager is a free, open-source web application that helps
-you manage your personal workouts, weight, and diet plans and can also be used
-as a simple gym management utility. It offers a REST API as well, for easy
-integration with other projects and tools.
-
-For more details and a live system, refer to the project's site:
-https://github.com/wger-project/wger
-
-
-This documentation is intended for developers and administrators of the software.
-
-
-Installation and administration
--------------------------------
-.. toctree::
-
- installation
-
-
-Development
--------------------------------
-.. toctree::
-
- tips_and_tricks
- codingstyle
- i18n
-
-
-Administration guide
---------------------
-.. toctree::
-
- commands
- settings
- gym
-
-
-Changelog
----------
-.. toctree::
- :maxdepth: 2
-
- changelog
-
-Contact
--------
-
-Feel free to contact us if you found this useful or if there was something that
-didn't behave as you expected (in this case you can also open a ticket on the
-issue tracker).
-
-* **discord:** https://discord.gg/rPWFv6W
-* **issue tracker:** https://github.com/wger-project/wger/issues
-* **twitter:** https://twitter.com/wger_project
-
-
-Sources
--------
-
-All the code and the content is freely available and is hosted on GitHub:
-https://github.com/wger-project/wger
-
-
-Licence
--------
-
-The application is licenced under the Affero GNU General Public License 3 or
-later (AGPL 3+).
-
-The initial exercise and ingredient data is licensed additionally under a
-Creative Commons Attribution Share-Alike 3.0 (CC-BY-SA 3.0)
-
-The documentation is released under a CC-BY-SA either version 4 of the License,
-or (at your option) any later version.
-
-Some images were taken from Wikipedia, see the SOURCES file in their respective
-folders for more details.
-
-.. include the authors file from the root folder
-.. include:: ../AUTHORS.rst
-
diff --git a/docs/installation.rst b/docs/installation.rst
deleted file mode 100644
index 0eec32d5e..000000000
--- a/docs/installation.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-.. _installation:
-
-Installation
-============
-
-You can get a local instance of wger installed in a couple of minutes.
-
-It is recommended to install a development instance or start a docker
-image if you just want to try the application on your server or PC. All
-the following steps are performed on a Debian-based Linux distribution.
-If your setup differs (e.g. in Red Hat based distros the package names are
-slightly different) you will need to change the steps as appropriate.
-
-You can safely install from master, it is almost always in a usable and
-stable state.
-
-The application is compatible and regularly tested with
-
-* PostgreSQL, sqlite
-* python 3.8, 3.9, 3.10 and pypy3
-
-After installation, you might also want to take a look at the :ref:`other-changes` section for other
-changes you might want to do to your local instance such as Terms of Service or
-contact page.
-
-.. note::
- Please note that all the steps related to upgrading the database or
- downloading external JS dependencies mentioned in the :ref:`tips` section
- in the development page apply to all the installation options.
-
-
-These are the necessary packages for both development and production::
-
- sudo apt-get install nodejs npm git python3-dev python3-venv
- sudo npm install -g yarn sass
-
-
-.. toctree::
- :maxdepth: 1
-
- development
- production
- docker
- updating
-
diff --git a/docs/make.bat b/docs/make.bat
deleted file mode 100644
index 223a7367a..000000000
--- a/docs/make.bat
+++ /dev/null
@@ -1,242 +0,0 @@
-@ECHO OFF
-
-REM Command file for Sphinx documentation
-
-if "%SPHINXBUILD%" == "" (
- set SPHINXBUILD=sphinx-build
-)
-set BUILDDIR=_build
-set ALLSPHINXOPTS=-d %BUILDDIR%/doctrees %SPHINXOPTS% .
-set I18NSPHINXOPTS=%SPHINXOPTS% .
-if NOT "%PAPER%" == "" (
- set ALLSPHINXOPTS=-D latex_paper_size=%PAPER% %ALLSPHINXOPTS%
- set I18NSPHINXOPTS=-D latex_paper_size=%PAPER% %I18NSPHINXOPTS%
-)
-
-if "%1" == "" goto help
-
-if "%1" == "help" (
- :help
- echo.Please use `make ^<target^>` where ^<target^> is one of
- echo. html to make standalone HTML files
- echo. dirhtml to make HTML files named index.html in directories
- echo. singlehtml to make a single large HTML file
- echo. pickle to make pickle files
- echo. json to make JSON files
- echo. htmlhelp to make HTML files and a HTML help project
- echo. qthelp to make HTML files and a qthelp project
- echo. devhelp to make HTML files and a Devhelp project
- echo. epub to make an epub
- echo. latex to make LaTeX files, you can set PAPER=a4 or PAPER=letter
- echo. text to make text files
- echo. man to make manual pages
- echo. texinfo to make Texinfo files
- echo. gettext to make PO message catalogs
- echo. changes to make an overview over all changed/added/deprecated items
- echo. xml to make Docutils-native XML files
- echo. pseudoxml to make pseudoxml-XML files for display purposes
- echo. linkcheck to check all external links for integrity
- echo. doctest to run all doctests embedded in the documentation if enabled
- goto end
-)
-
-if "%1" == "clean" (
- for /d %%i in (%BUILDDIR%\*) do rmdir /q /s %%i
- del /q /s %BUILDDIR%\*
- goto end
-)
-
-
-%SPHINXBUILD% 2> nul
-if errorlevel 9009 (
- echo.
- echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
- echo.installed, then set the SPHINXBUILD environment variable to point
- echo.to the full path of the 'sphinx-build' executable. Alternatively you
- echo.may add the Sphinx directory to PATH.
- echo.
- echo.If you don't have Sphinx installed, grab it from
- echo.http://sphinx-doc.org/
- exit /b 1
-)
-
-if "%1" == "html" (
- %SPHINXBUILD% -b html %ALLSPHINXOPTS% %BUILDDIR%/html
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/html.
- goto end
-)
-
-if "%1" == "dirhtml" (
- %SPHINXBUILD% -b dirhtml %ALLSPHINXOPTS% %BUILDDIR%/dirhtml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/dirhtml.
- goto end
-)
-
-if "%1" == "singlehtml" (
- %SPHINXBUILD% -b singlehtml %ALLSPHINXOPTS% %BUILDDIR%/singlehtml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The HTML pages are in %BUILDDIR%/singlehtml.
- goto end
-)
-
-if "%1" == "pickle" (
- %SPHINXBUILD% -b pickle %ALLSPHINXOPTS% %BUILDDIR%/pickle
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can process the pickle files.
- goto end
-)
-
-if "%1" == "json" (
- %SPHINXBUILD% -b json %ALLSPHINXOPTS% %BUILDDIR%/json
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can process the JSON files.
- goto end
-)
-
-if "%1" == "htmlhelp" (
- %SPHINXBUILD% -b htmlhelp %ALLSPHINXOPTS% %BUILDDIR%/htmlhelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can run HTML Help Workshop with the ^
-.hhp project file in %BUILDDIR%/htmlhelp.
- goto end
-)
-
-if "%1" == "qthelp" (
- %SPHINXBUILD% -b qthelp %ALLSPHINXOPTS% %BUILDDIR%/qthelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; now you can run "qcollectiongenerator" with the ^
-.qhcp project file in %BUILDDIR%/qthelp, like this:
- echo.^> qcollectiongenerator %BUILDDIR%\qthelp\wgerWorkoutManager.qhcp
- echo.To view the help file:
- echo.^> assistant -collectionFile %BUILDDIR%\qthelp\wgerWorkoutManager.ghc
- goto end
-)
-
-if "%1" == "devhelp" (
- %SPHINXBUILD% -b devhelp %ALLSPHINXOPTS% %BUILDDIR%/devhelp
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished.
- goto end
-)
-
-if "%1" == "epub" (
- %SPHINXBUILD% -b epub %ALLSPHINXOPTS% %BUILDDIR%/epub
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The epub file is in %BUILDDIR%/epub.
- goto end
-)
-
-if "%1" == "latex" (
- %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished; the LaTeX files are in %BUILDDIR%/latex.
- goto end
-)
-
-if "%1" == "latexpdf" (
- %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
- cd %BUILDDIR%/latex
- make all-pdf
- cd %BUILDDIR%/..
- echo.
- echo.Build finished; the PDF files are in %BUILDDIR%/latex.
- goto end
-)
-
-if "%1" == "latexpdfja" (
- %SPHINXBUILD% -b latex %ALLSPHINXOPTS% %BUILDDIR%/latex
- cd %BUILDDIR%/latex
- make all-pdf-ja
- cd %BUILDDIR%/..
- echo.
- echo.Build finished; the PDF files are in %BUILDDIR%/latex.
- goto end
-)
-
-if "%1" == "text" (
- %SPHINXBUILD% -b text %ALLSPHINXOPTS% %BUILDDIR%/text
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The text files are in %BUILDDIR%/text.
- goto end
-)
-
-if "%1" == "man" (
- %SPHINXBUILD% -b man %ALLSPHINXOPTS% %BUILDDIR%/man
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The manual pages are in %BUILDDIR%/man.
- goto end
-)
-
-if "%1" == "texinfo" (
- %SPHINXBUILD% -b texinfo %ALLSPHINXOPTS% %BUILDDIR%/texinfo
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The Texinfo files are in %BUILDDIR%/texinfo.
- goto end
-)
-
-if "%1" == "gettext" (
- %SPHINXBUILD% -b gettext %I18NSPHINXOPTS% %BUILDDIR%/locale
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The message catalogs are in %BUILDDIR%/locale.
- goto end
-)
-
-if "%1" == "changes" (
- %SPHINXBUILD% -b changes %ALLSPHINXOPTS% %BUILDDIR%/changes
- if errorlevel 1 exit /b 1
- echo.
- echo.The overview file is in %BUILDDIR%/changes.
- goto end
-)
-
-if "%1" == "linkcheck" (
- %SPHINXBUILD% -b linkcheck %ALLSPHINXOPTS% %BUILDDIR%/linkcheck
- if errorlevel 1 exit /b 1
- echo.
- echo.Link check complete; look for any errors in the above output ^
-or in %BUILDDIR%/linkcheck/output.txt.
- goto end
-)
-
-if "%1" == "doctest" (
- %SPHINXBUILD% -b doctest %ALLSPHINXOPTS% %BUILDDIR%/doctest
- if errorlevel 1 exit /b 1
- echo.
- echo.Testing of doctests in the sources finished, look at the ^
-results in %BUILDDIR%/doctest/output.txt.
- goto end
-)
-
-if "%1" == "xml" (
- %SPHINXBUILD% -b xml %ALLSPHINXOPTS% %BUILDDIR%/xml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The XML files are in %BUILDDIR%/xml.
- goto end
-)
-
-if "%1" == "pseudoxml" (
- %SPHINXBUILD% -b pseudoxml %ALLSPHINXOPTS% %BUILDDIR%/pseudoxml
- if errorlevel 1 exit /b 1
- echo.
- echo.Build finished. The pseudo-XML files are in %BUILDDIR%/pseudoxml.
- goto end
-)
-
-:end
diff --git a/docs/production.rst b/docs/production.rst
deleted file mode 100644
index 6fc53c1fb..000000000
--- a/docs/production.rst
+++ /dev/null
@@ -1,206 +0,0 @@
-Production
-==========
-
-Wger user
----------
-
-It is recommended to add a dedicated user for the application::
-
- sudo adduser wger --disabled-password --gecos ""
-
-The following steps assume you did, but it is not necessary (nor is it
-necessary to call it 'wger'). In that case, change the paths as needed.
-
-Apache
-------
-
-Install apache and the WSGI module::
-
- sudo apt-get install apache2 libapache2-mod-wsgi-py3
- sudo vim /etc/apache2/sites-available/wger.conf
-
-
-Configure apache to serve the application::
-
- <Directory /home/wger/src>
- <Files wsgi.py>
- Require all granted
- </Files>
- </Directory>
-
-
- <VirtualHost *:80>
- WSGIDaemonProcess wger python-path=/home/wger/src python-home=/home/wger/venv
- WSGIProcessGroup wger
- WSGIScriptAlias / /home/wger/src/wger/wsgi.py
-
- Alias /static/ /home/wger/static/
- <Directory /home/wger/static>
- Require all granted
- </Directory>
-
- Alias /media/ /home/wger/media/
- <Directory /home/wger/media>
- Require all granted
- </Directory>
-
- ErrorLog ${APACHE_LOG_DIR}/wger-error.log
- CustomLog ${APACHE_LOG_DIR}/wger-access.log combined
- </VirtualHost>
-
-Apache has a problem when uploading files that have non-ASCII characters, e.g.
-for exercise images. To avoid this, add to /etc/apache2/envvars (if there is
-already an ``export LANG``, replace it) or set your system's locale::
-
- export LANG='en_US.UTF-8'
- export LC_ALL='en_US.UTF-8'
-
-
-Activate the settings and disable apache's default::
-
- sudo a2dissite 000-default.conf
- sudo a2ensite wger
- sudo service apache2 reload
-
-Database
---------
-
-.. _prod_postgres:
-
-PostgreSQL
-~~~~~~~~~~
-
-Install the Postgres server and create a database and a user::
-
- sudo apt-get install postgresql postgresql-server-dev-12 # or appropriate version
- sudo su - postgres
- createdb wger
- psql wger -c "CREATE USER wger WITH PASSWORD 'wger'";
- psql wger -c "GRANT ALL PRIVILEGES ON DATABASE wger to wger";
-
-You might want or need to edit your ``pg_hba.conf`` file to allow local socket
-connections or similar.
-
-
-SQLite
-~~~~~~
-
-If using sqlite, create a folder for it (must be writable by the apache user)::
-
- mkdir db
- touch db/database.sqlite
- chown :www-data -R /home/wger/db
- chmod g+w /home/wger/db /home/wger/db/database.sqlite
-
-Application
------------
-
-Make a virtualenv for python and activate it::
-
- python3 -m venv /home/wger/venv
- source /home/wger/venv/bin/activate
-
-Create folders to collect all static resources and save uploaded files. The
-``static`` folder will only contain CSS and JS files, so it must be readable
-by the apache process while ``media`` will contain the uploaded files and must
-be writeable as well::
-
- mkdir static
-
- mkdir media
- chmod o+w media
-
-Get the application::
-
- git clone https://github.com/wger-project/wger.git /home/wger/src
- cd /home/wger/src
- pip install -r requirements.txt
- python setup.py develop
- # Only if using postgres
- pip install psycopg2
-
- # If using sqlite without the --database-path
- wger create-settings --database-path /home/wger/db/database.sqlite
-
-Edit the settings file
-
-* Add the correct values for the database (use ``django.db.backends.postgresql``
- for the engine) if you are using postgres
-
-* Set ``MEDIA_ROOT`` to ``/home/wger/media`` and ``STATIC_ROOT`` to ``/home/wger/static``.
-
-* Add the domains that your site will be accessed to `ALLOWED_HOSTS=['example.com', 'www.example.com']`
- (you might want to do this as the last step when you know everything else is
- working correctly)
-
-Run the installation script, this will download some CSS and JS libraries and
-load all initial data::
-
- wger bootstrap
-
-
-Collect all static resources::
-
- python manage.py collectstatic
-
-
-The bootstrap command will also create a default administrator user (you probably
-want to change the password as soon as you log in):
-
-
-* **username**: admin
-* **password**: adminadmin
-
-.. _email:
-
-Email
------
-
-The application is configured to use Django's console email backend by default, which causes messages intended to be sent via email to be written to ``stdout``.
-
-In order to use a real email server, another backend listed in `Django's documentation`_ can be configured instead. Parameters for the backend are set as variables in ``settings.py``. For example, the following allows an SMTP server at ``smtp.example.com`` to be used::
-
- Email_BACKEND = 'django.core.mail.backends.smtp.EmailBackend'
- ENABLE_EMAIL = True
- EMAIL_HOST = 'smtp.example.com'
- EMAIL_PORT = 587
- EMAIL_HOST_USER = '[email protected]'
- EMAIL_HOST_PASSWORD = 'example_password'
- EMAIL_USE_TLS = True
- EMAIL_USE_SSL = False
- DEFAULT_FROM_EMAIL = 'wger Workout Manager <[email protected]>'
-
-Django provides a ``sendtestemail`` command via ``manage.py`` to test email settings::
-
- python manage.py sendtestemail [email protected]
-
-.. _`Django's documentation`: https://docs.djangoproject.com/en/dev/topics/email/#email-backends
-
-.. _site-settings:
-
-Site Settings
--------------
-
-Some wger features make use of Django's site name and domain settings in the ``contrib.sites`` framework. These should be set through the Python shell::
-
- python manage.py shell
- >>> from django.contrib.sites.models import Site
- >>> site = Site.objects.get(pk=1)
- >>> site.domain = 'wger.example.com'
- >>> site.name = 'example.com wger Workout Manager'
- >>> site.save()
-
-where ``wger.example.com`` is the domain of the wger instance. This assumes that wger is using the default site ID of 1. If a different site ID is being used, it must be specified in ``settings.py``::
-
- SITE_ID = 2
-
-.. _other-changes:
-
-Other changes
--------------
-
-If you want to use the application as a public instance, you will probably want to
-change the following templates:
-
-* **tos.html**, for your own Terms Of Service here
-* **about.html**, for your contact address or other such legal requirements
diff --git a/docs/settings.rst b/docs/settings.rst
deleted file mode 100644
index 3b2f58cb3..000000000
--- a/docs/settings.rst
+++ /dev/null
@@ -1,36 +0,0 @@
-.. _settings:
-
-Settings
-========
-
-You can configure some of the application behaviour with the ``WGER_SETTINGS``
-dictionary in your settings file. Currently, the following options are supported:
-
-**ALLOW_REGISTRATION**: Default ``True``.
- Controls whether users can register on their own or if a gym administrator has
- to create the user accounts.
-
-**ALLOW_GUEST_USERS**: Default ``True``.
- Controls whether users can use the site as a guest user or if an administrator
- has to create the user accounts, as with the option above.
-
-**USE_RECAPTCHA**: Default ``False``.
- Controls whether a captcha challenge will be presented when new users register.
-
-**REMOVE_WHITESPACE**: Default ``False``.
- Removes whitespaces around HTML tags to reduce the size of the resulting HTML.
- If you are not serving the site using TLS you probably want to use the GZip
- middleware instead. Read the Django documentation on the security implications
- (BREACH attack).
-
-**EMAIL_FROM**: Default `wger Workout Manager <[email protected]>`
- The sender address used for sent emails by the system such as weight reminders
-
-
-.. note::
- If you want to override a default setting, don't overwrite all the dictionary
- but only the keys you need, e.g. ``WGER_SETTINGS['foo'] = 'bar'``. This avoids
- problems when new keys are added in the global settings.
-
-Set the URL for your site in the table ``django_site``. This is only used e.g. in
-the password reset emails.
diff --git a/docs/tips_and_tricks.rst b/docs/tips_and_tricks.rst
deleted file mode 100644
index 1ac87210b..000000000
--- a/docs/tips_and_tricks.rst
+++ /dev/null
@@ -1,117 +0,0 @@
-.. _tips:
-
-Tips and tricks
----------------
-
-Clearing the cache
-~~~~~~~~~~~~~~~~~~
-
-Sometimes there are changes to the internal changes of the cached structures.
-It is recommended that you just clear all the existing caches
-``python manage.py clear-cache --clear-all`` or just set the timeout to something
-like one second (in settings.py::
-
- CACHES = {
- 'default': {
- 'BACKEND': 'django.core.cache.backends.locmem.LocMemCache',
- 'LOCATION': 'wger-cache',
- 'TIMEOUT': 1
- }
- }
-
-Miscellaneous settings
-~~~~~~~~~~~~~~~~~~~~~~
-
-The following settings can be very useful during development (add to your
-settings.py):
-
-
-**Setting the email backend**
- Use the console backend, all sent emails will be printed to it::
-
- EMAIL_BACKEND = 'django.core.mail.backends.console.EmailBackend'
-
-Dummy data generator
-~~~~~~~~~~~~~~~~~~~~
-
-To properly test the different parts of the application for usability or
-performance, it is often very useful to have some data to work with. For this
-reason, there is a dummy data generator script in
-extras/dummy_generator/generator.py. It allows you to generate entries for
-users, gyms, workouts, and logs. For detailed usage options do::
-
- python generator.py --help
-
-Or for options for, e.g. user generation::
-
- python generator.py users --help
-
-To get you started, you might want to invoke the script in the following way. This
-will create 10 gyms and 300 users, randomly assigning them to a different gym. Each
-user will have 20 workouts and each exercise in each workout 30 log entries as well
-as 10 nutrition diary entries per day::
-
- python generator.py gyms 10
- python generator.py users 300
- python generator.py workouts 20
- python generator.py logs 30
- python generator.py sessions random
- python generator.py weight 100
- python generator.py nutrition 20
- python generator.py nutrition-diary 10
- python generator.py measurement 20
-
-.. note::
- All generated users have their username as a password.
-
-.. note::
- While it is possible to generate hundreds of users, gyms are more restricted and
- you will probably get duplicate names if you generate more than a dozen.
-
-
-Selectively running tests
-~~~~~~~~~~~~~~~~~~~~~~~~~
-
-If you do a ``python manage.py test`` you will run the complete testsuite, and
-this can take a while. You can control which tests will be executed like this.
-
-Test only the tests in the 'core' app::
-
- python manage.py test wger.core
-
-Test only the tests in the 'test_user.py` file in the core app::
-
- python manage.py test wger.core.tests.test_user
-
-Test only the tests in 'StatusUserTestCase' in the file 'test_user.py` file in
-the core app::
-
- python manage.py test wger.core.tests.test_user.StatusUserTestCase
-
-
-Using runserver_plus
-~~~~~~~~~~~~~~~~~~~~
-
-During development, you can use ``runserver_plus`` instead of the default Django
-server as you can use an interactive debugger directly from the browser if an
-exception occurs. It also accepts the same command-line options. For this just
-install the following packages::
-
- pip install django_extensions werkzeug
- python manage.py runserver_plus [options]
-
-
-Contributing
-------------
-
-* **Send pull requests**: for new code you want to share, please send pull
- requests in GitHub. Sending patches by email or attaching them to an issue
- means a lot more work. It's recommended that you work on a feature branch
- when working on something, especially when it's something bigger. While many
- people insist on rebasing before sending a pull request, it's not necessary.
-
-* **Run the tests**: wger is proud to have a test coverage of over 90%. When you
- implement something new, don't forget to run the testsuite and write appropriate
- tests for the new code.
-
-* **Code according to the coding style**: :ref:`codingstyle`
diff --git a/docs/updating.rst b/docs/updating.rst
deleted file mode 100644
index 186a99c4e..000000000
--- a/docs/updating.rst
+++ /dev/null
@@ -1,47 +0,0 @@
-.. _updating:
-
-Updating the application
-========================
-To keep the application updated you need to regularly perform the following
-steps well you pull from upstream.
-
-
-Python dependencies
-```````````````````
-To install updated python dependencies::
-
- source /path/to/venv/bin/activate
- python manage.py migrate
-
-
-Upgrade the database
-````````````````````````````````
-There are regular changes and upgrades to the database schema (these may also
-come from new versions of Django or the installed dependencies). If you start
-your server and see a message that there are unapplied migrations, just do::
-
- python manage.py migrate --all
-
-You might want to save a dump of the database before applying the migrations
-in case something happens.
-
-
-JS and CSS dependencies
-````````````````````````````````
-We use yarn to download the JS and CSS libraries. To update them just run
-the following command on the source folder::
-
- yarn install
- yarn build:css:sass
- python manage.py collectstatic # only needed in production
-
-Pull new data
-`````````````
-
-You can pull new exercise data and ingredients but remember that new ingredients
-can overwrite the ones you added manually::
-
- python3 manage.py sync-exercises
- python3 manage.py download-exercise-images
- wger load-online-fixtures
-
diff --git a/requirements.txt b/requirements.txt
index 8640faf6c..4f2a8f640 100644
--- a/requirements.txt
+++ b/requirements.txt
@@ -18,8 +18,6 @@ invoke~=1.6
pillow~=8.4
reportlab==3.6.5
requests==2.27.1
-setuptools>=18.5
-sphinx==4.3.2
# AWS
#boto3