Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

Add GMI Precip Rate; update version for Brightness Temp

minniewong14a53d1d0254
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Asc.md b/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Asc.md
index 646af4a4e..b06829e22 100644
--- a/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Asc.md
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Asc.md
@@ -2,4 +2,4 @@ The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Brightness Tem
The GPM Microwave Imager (GMI) is an instrument on the satellite known as the Global Precipitation Measurement (GPM) Core Observatory. The parent data product for the Brightness Temperature layer is the 1CGMI data product, which is also known as "Level 1C Common Calibrated Brightness Temperatures" or as "GPM_1CGPMGMI". The imagery resolution is 2 km and sensor resolution is approximately 4 km at the equator, and the footprints of the GMI channels vary from approximately 26 km to 6 km across. The temporal resolution is daily.
-References: GPM_1CGPMGMI [doi:10.5067/GPM/GMI/GPM/1C/05](https://doi.org/10.5067/GPM/GMI/GPM/1C/05); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
+References: GPM_1CGPMGMI [doi:10.5067/GPM/GMI/GPM/1C/07](https://doi.org/10.5067/GPM/GMI/GPM/1C/07); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Dsc.md b/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Dsc.md
index d18125c7a..ab5411462 100644
--- a/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Dsc.md
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Brightness_Temp_Dsc.md
@@ -2,5 +2,4 @@ The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Brightness Tem
The GPM Microwave Imager (GMI) is an instrument on the satellite known as the Global Precipitation Measurement (GPM) Core Observatory. The parent data product for the Brightness Temperature layer is the 1CGMI data product, which is also known as "Level 1C Common Calibrated Brightness Temperatures" or as "GPM_1CGPMGMI". The imagery resolution is 2 km and sensor resolution is approximately 4 km at the equator, and the footprints of the GMI channels vary from approximately 26 km to 6 km across. The temporal resolution is daily.
-References: GPM_1CGPMGMI [doi:10.5067/GPM/GMI/GPM/1C/05](https://doi.org/10.5067/GPM/GMI/GPM/1C/05); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
-
+References: GPM_1CGPMGMI [doi:10.5067/GPM/GMI/GPM/1C/07](https://doi.org/10.5067/GPM/GMI/GPM/1C/07); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md
new file mode 100644
index 000000000..cb12f73a3
--- /dev/null
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md
@@ -0,0 +1,7 @@
+The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate(Ascending) layer provides the rate at with rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
+
+The GPM Microwave Imager (GMI) has a total of 13 channels, each observing the Earth at a different frequency (10-183 GHz) or at a different polarization (vertical or horizontal). Each channel measures the natural emission from the Earth's surface, atmospheric gases, and precipitation. GMI sees through the tops of clouds to observe how much and where precipitation occurs. The lower frequency GMI channels respond more directly to rain, while the higher frequency GMI channels respond to the higher-altitude ice precipitation that is often associated with vigorous rain rates near the Earth's surface.
+
+The GPM Microwave Imager (GMI) is an instrument on the satellite known as the Global Precipitation Measurement (GPM) Core Observatory. The parent data product for the Rain Rate layer is the 2AGPROFGMI data product, which is also known as "Level 2A Goddard Profiling algorithm" or as "GPM_2AGPROFGPMGMI". The imagery resolution is 2 km and sensor resolution is approximately 4 km at the equator, and the rain estimates are reported on footprints that are approximately 6 km across. The temporal resolution is daily.
+
+References: GPM_2AGPROFGPMGMI [doi:10.5067/GPM/GMI/GPM/GPROF/2A/07](https://doi.org/10.5067/GPM/GMI/GPM/GPROF/2A/07); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md
new file mode 100644
index 000000000..d327fe645
--- /dev/null
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md
@@ -0,0 +1,7 @@
+The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate(Descending) layer provides the rate at with rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
+
+The GPM Microwave Imager (GMI) has a total of 13 channels, each observing the Earth at a different frequency (10-183 GHz) or at a different polarization (vertical or horizontal). Each channel measures the natural emission from the Earth's surface, atmospheric gases, and precipitation. GMI sees through the tops of clouds to observe how much and where precipitation occurs. The lower frequency GMI channels respond more directly to rain, while the higher frequency GMI channels respond to the higher-altitude ice precipitation that is often associated with vigorous rain rates near the Earth's surface.
+
+The GPM Microwave Imager (GMI) is an instrument on the satellite known as the Global Precipitation Measurement (GPM) Core Observatory. The parent data product for the Rain Rate layer is the 2AGPROFGMI data product, which is also known as "Level 2A Goddard Profiling algorithm" or as "GPM_2AGPROFGPMGMI". The imagery resolution is 2 km and sensor resolution is approximately 4 km at the equator, and the rain estimates are reported on footprints that are approximately 6 km across. The temporal resolution is daily.
+
+References: GPM_2AGPROFGPMGMI [doi:10.5067/GPM/GMI/GPM/GPROF/2A/07](https://doi.org/10.5067/GPM/GMI/GPM/GPROF/2A/07); [GMI](https://gpm.nasa.gov/gpm/flight-project/gmi); [Precipitation Measurement Missions](https://pps.gsfc.nasa.gov)
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/layerOrder.json b/config/default/common/config/wv.json/layerOrder.json
index 6ee7a613d..2e4e9e9a8 100644
--- a/config/default/common/config/wv.json/layerOrder.json
+++ b/config/default/common/config/wv.json/layerOrder.json
@@ -341,6 +341,8 @@
"IMERG_Precipitation_Rate",
"GMI_Brightness_Temp_Asc",
"GMI_Brightness_Temp_Dsc",
+ "GMI_Precipitation_Rate_Asc",
+ "GMI_Precipitation_Rate_Dsc",
"GMI_Rain_Rate_Asc",
"GMI_Rain_Rate_Dsc",
"GMI_Snow_Rate_Asc",
diff --git a/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Asc.json b/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Asc.json
new file mode 100644
index 000000000..fe9e08464
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Asc.json
@@ -0,0 +1,10 @@
+{
+ "layers": {
+ "GMI_Precipitation_Rate_Asc": {
+ "id": "GMI_Precipitation_Rate_Asc",
+ "description": "gpm/GMI_Precipitation_Rate_Asc",
+ "group": "overlays",
+ "layergroup": "Precipitation Rate"
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Dsc.json b/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Dsc.json
new file mode 100644
index 000000000..997bbc842
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/gpm/GMI_Precipitation_Rate_Dsc.json
@@ -0,0 +1,10 @@
+{
+ "layers": {
+ "GMI_Precipitation_Rate_Dsc": {
+ "id": "GMI_Precipitation_Rate_Dsc",
+ "description": "gpm/GMI_Precipitation_Rate_Dsc",
+ "group": "overlays",
+ "layergroup": "Precipitation Rate"
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/measurements/Featured - Precipitation.json b/config/default/common/config/wv.json/measurements/Featured - Precipitation.json
index 66337a728..36d5b1ef9 100644
--- a/config/default/common/config/wv.json/measurements/Featured - Precipitation.json
+++ b/config/default/common/config/wv.json/measurements/Featured - Precipitation.json
@@ -20,6 +20,8 @@
"description": "",
"image": "",
"settings": [
+ "GMI_Precipitation_Rate_Asc",
+ "GMI_Precipitation_Rate_Dsc",
"GMI_Rain_Rate_Asc",
"GMI_Rain_Rate_Dsc",
"GMI_Snow_Rate_Asc",
diff --git a/config/default/common/config/wv.json/measurements/Precipitation Rate.json b/config/default/common/config/wv.json/measurements/Precipitation Rate.json
index c80a55026..efb93594f 100644
--- a/config/default/common/config/wv.json/measurements/Precipitation Rate.json
+++ b/config/default/common/config/wv.json/measurements/Precipitation Rate.json
@@ -20,6 +20,8 @@
"description": "",
"image": "",
"settings": [
+ "GMI_Precipitation_Rate_Asc",
+ "GMI_Precipitation_Rate_Dsc",
"GMI_Rain_Rate_Asc",
"GMI_Rain_Rate_Dsc",
"GMI_Snow_Rate_Asc",
diff --git a/config/default/common/previewLayerOverrides.json b/config/default/common/previewLayerOverrides.json
index 6dc358b10..f555b6479 100644
--- a/config/default/common/previewLayerOverrides.json
+++ b/config/default/common/previewLayerOverrides.json
@@ -16,6 +16,9 @@
"GOES-West_ABI_Band2_Red_Visible_1km": "2020-01-02T21:00:00Z",
"GOES-West_ABI_Band13_Clean_Infrared": "2020-01-02T21:00:00Z",
+ "GMI_Precipitation_Rate_Asc": "2020-01-02T00:00:00Z",
+ "GMI_Precipitation_Rate_Dsc": "2020-01-02T00:00:00Z",
+
"Himawari_AHI_Air_Mass": "2020-01-02T03:00:00Z",
"Himawari_AHI_Band3_Red_Visible_1km": "2020-01-02T03:00:00Z",
"Himawari_AHI_Band13_Clean_Infrared": "2020-01-02T03:00:00Z",
diff --git a/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Asc.jpg b/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Asc.jpg
new file mode 100644
index 000000000..427c9e943
Binary files /dev/null and b/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Asc.jpg differ
diff --git a/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Dsc.jpg b/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Dsc.jpg
new file mode 100644
index 000000000..427c9e943
Binary files /dev/null and b/web/images/layers/previews/geographic/GMI_Precipitation_Rate_Dsc.jpg differ