Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

Add Sentinel-2A info; update TRMM layer descriptions for v7 (#5790)

minniewong21c48630130d
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md
index cb12f73a3..ec3fcbea6 100644
--- a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Asc.md
@@ -1,4 +1,4 @@
-The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate(Ascending) layer provides the rate at with rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
+The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate (Ascending) layer provides the rate at which rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
The GPM Microwave Imager (GMI) has a total of 13 channels, each observing the Earth at a different frequency (10-183 GHz) or at a different polarization (vertical or horizontal). Each channel measures the natural emission from the Earth's surface, atmospheric gases, and precipitation. GMI sees through the tops of clouds to observe how much and where precipitation occurs. The lower frequency GMI channels respond more directly to rain, while the higher frequency GMI channels respond to the higher-altitude ice precipitation that is often associated with vigorous rain rates near the Earth's surface.
diff --git a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md
index d327fe645..c68b1ff97 100644
--- a/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md
+++ b/config/default/common/config/metadata/layers/gpm/GMI_Precipitation_Rate_Dsc.md
@@ -1,4 +1,4 @@
-The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate(Descending) layer provides the rate at with rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
+The Global Precipitation Measurement (GPM) Microwave Imager (GMI) Precipitation Rate (Descending) layer provides the rate at which rain and frozen precipitation (snow) reaches the Earth's surface in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
The GPM Microwave Imager (GMI) has a total of 13 channels, each observing the Earth at a different frequency (10-183 GHz) or at a different polarization (vertical or horizontal). Each channel measures the natural emission from the Earth's surface, atmospheric gases, and precipitation. GMI sees through the tops of clouds to observe how much and where precipitation occurs. The lower frequency GMI channels respond more directly to rain, while the higher frequency GMI channels respond to the higher-altitude ice precipitation that is often associated with vigorous rain rates near the Earth's surface.
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Sentinel.md
index ce8cfa855..cc1622d05 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Color_Infrared_Sentinel.md
@@ -4,11 +4,14 @@ The dynamically generated Reflectance (Bands 8-4-3, False Color) imagery layer i
The Reflectance imagery layer from Sentinel-2\/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
+
This imagery layer is provided dynamically through the [NASA Interagency Implementation and Advanced Concepts Team (IMPACT)](https://www.earthdata.nasa.gov/about/impact). As it is dynamically generated, it may take slightly longer to display than normal. The imagery is only available at higher zoom levels.
References: HLSS30 v002 [doi:10.5067/HLS/HLSS30.002](https://doi.org/10.5067/HLS/HLSS30.002)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Sentinel.md
index dcb5c8207..3a1379e38 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Customizable_Sentinel.md
@@ -4,8 +4,10 @@ This Reflectance imagery layer can be customized to display any available Red-Gr
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Sentinel.md
index bb09b4b41..5fd35df62 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_EVI_Sentinel.md
@@ -16,8 +16,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Sentinel.md
index b5e1107a6..fbcb1e128 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Sentinel.md
@@ -4,8 +4,10 @@ The dynamically generated Reflectance (Bands 8-4-3, Color Infrared) imagery laye
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Sentinel.md
index 84e3e25f5..d8b4be98a 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Urban_Sentinel.md
@@ -4,8 +4,10 @@ The dynamically generated Reflectance (Bands 12-11-4, Urban False Color) imagery
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Vegetation_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Vegetation_Sentinel.md
index 4cddb82b4..d19ab10ab 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Vegetation_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_False_Color_Vegetation_Sentinel.md
@@ -4,8 +4,10 @@ The dynamically generated Reflectance (Bands 11-8A-4, Vegetative Analysis False
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_MSAVI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_MSAVI_Sentinel.md
index 12c68b886..686aea2a7 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_MSAVI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_MSAVI_Sentinel.md
@@ -14,8 +14,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Moisture_Index_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Moisture_Index_Sentinel.md
index a4253935c..dea0294cc 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Moisture_Index_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Moisture_Index_Sentinel.md
@@ -10,8 +10,10 @@ The image is applied with a divergent blue to red color palette. The image is ap
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR2_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR2_Sentinel.md
index 3a4521566..e3af528d2 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR2_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR2_Sentinel.md
@@ -14,8 +14,10 @@ The divergent purple to orange color palette depicts vegetated areas in shades o
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR_Sentinel.md
index fbcbc1a9d..2da870ce1 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NBR_Sentinel.md
@@ -14,8 +14,10 @@ The divergent purple to orange color palette depicts vegetated areas in shades o
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDSI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDSI_Sentinel.md
index 479aa0d6a..1e3127635 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDSI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDSI_Sentinel.md
@@ -8,8 +8,10 @@ It is calculated using:
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDVI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDVI_Sentinel.md
index 94c60274e..e8e23d0fd 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDVI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDVI_Sentinel.md
@@ -10,8 +10,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDWI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDWI_Sentinel.md
index 16943db4f..6cb78900d 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDWI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_NDWI_Sentinel.md
@@ -10,8 +10,10 @@ The index can overestimate water bodies as it is sensitive to built-up areas. Te
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md
index f69dee812..d4496c8d2 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md
@@ -2,8 +2,10 @@ The Reflectance (Nadir BRDF Adjusted) imagery layer from Sentinel-2/MSI is a tru
The Reflectance (Nadir BRDF-Adjusted) product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_SAVI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_SAVI_Sentinel.md
index 5509cbd20..37241e256 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_SAVI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_SAVI_Sentinel.md
@@ -14,8 +14,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Shortwave_Infrared_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Shortwave_Infrared_Sentinel.md
index 28c9a755e..4c9998ace 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Shortwave_Infrared_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_Shortwave_Infrared_Sentinel.md
@@ -4,8 +4,10 @@ The dynamically generated Reflectance (Bands 12-8A-4, Shortwave Infrared) imager
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_TVI_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_TVI_Sentinel.md
index 4c2692c4a..f939148fe 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_TVI_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_TVI_Sentinel.md
@@ -12,8 +12,10 @@ The image is applied with a divergent blue-green to brown color palette. It depi
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_True_Color_Sentinel.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_True_Color_Sentinel.md
index dea7504c7..2a351f015 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_True_Color_Sentinel.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_True_Color_Sentinel.md
@@ -4,8 +4,10 @@ The dynamically generated Reflectance (Bands 4-3-2, True Color) imagery layer is
The Reflectance imagery layer from Sentinel-2/MSI product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A, Sentinel-2B, and Sentinel-2C satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Landsat 8 and 9 imagery layer available.
-On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md b/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md
index a0be05dd6..bced2f2b2 100644
--- a/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md
+++ b/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md
@@ -5,8 +5,10 @@ The HLS project began with Landsat 8, Sentinel-2A, and Sentinel-2B. Landsat 9 la
- Landsat 8: April 11, 2013 - Present
- Landsat 9: May 31, 2022 - Present
-On January 21, 2025, Sentinel-2C satellite replaced Sentinel-2A satellite. The HLS Sentinel-2 layers contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C.
-- Sentinel-2A: November 28, 2015 to January 22, 2025
+On January 21, 2025, the Sentinel-2C satellite replaced Sentinel-2A satellite. In addition, a [temporary one year extension campaign](https://sentinels.copernicus.eu/-/sentinel-2a-extended-campaign-starting-march-13-2025) of Sentinel-2A began on March 13, 2025. This campaign provides increased observations over Europe, and tropical regions of Africa and South America.
+
+This layer contains a mix of imagery from Sentinel-2A, Sentinel-2B, and Sentinel-2C:
+- Sentinel-2A: November 28, 2015 to January 22, 2025; March 14, 2025 to approximately March 2026.
- Sentinel-2B: September 18, 2017 to Present
- Sentinel-2C: January 21, 2025 to Present
diff --git a/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS.md b/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS.md
index 783c4db80..cdc73ad5f 100644
--- a/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS.md
+++ b/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS.md
@@ -1,3 +1,5 @@
-The OPERA Dynamic Surface Water Extent imagery layer is a Level-3 (L3) product that maps surface water every few days. The resolution is 30 m and the layer has 5 classifications: Not Water, Open Water, Partial Surface Water, Snow/Ice, and Cloud/Cloud Shadow. The input dataset for generating each product is the Harmonized Landsat Sentinel-2 (HLS) dataset. The OPERA Dynamic Surface Water Extent (L3) imagery layer is available through the Observational Products for End-Users from Remote Sensing Analysis (OPERA) project.
+The OPERA Dynamic Surface Water Extent imagery layer is a Level-3 (L3) product that maps surface water every few days. The resolution is 30 m and the layer has 5 classifications: Not Water, Open Water, Partial Surface Water, Snow/Ice, and Cloud/Cloud Shadow.
+
+The input dataset for generating each product is the Harmonized Landsat Sentinel-2 (HLS) dataset. The OPERA Dynamic Surface Water Extent (L3) imagery layer is available through the Observational Products for End-Users from Remote Sensing Analysis (OPERA) project.
References: [OPERA_L3_DSWX-HLS_V1](https://podaac.jpl.nasa.gov/dataset/OPERA_L3_DSWX-HLS_V1)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Asc.md b/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Asc.md
index e6e7e3a80..f7f2937ff 100644
--- a/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Asc.md
+++ b/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Asc.md
@@ -6,4 +6,4 @@ Brightness Temperature is a descriptive measure of radiation in terms of the tem
The spatial resolution is 13 km x 5 km, the imagery resolution is 2 km and temporal availability is daily.
-References: GPM_1CTRMMTMI [doi:10.5067/GPM/TMI/TRMM/1C/05](https://doi.org/10.5067/GPM/TMI/TRMM/1C/05)
+References: GPM_1CTRMMTMI [doi:10.5067/GPM/TMI/TRMM/1C/07](https://doi.org/10.5067/GPM/TMI/TRMM/1C/07)
diff --git a/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Dsc.md b/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Dsc.md
index b7578a1b3..e6d667548 100644
--- a/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Dsc.md
+++ b/config/default/common/config/metadata/layers/trmm/TRMM_Brightness_Temp_Dsc.md
@@ -6,4 +6,4 @@ Brightness Temperature is a descriptive measure of radiation in terms of the tem
The spatial resolution is 13 km x 5 km, the imagery resolution is 2 km and temporal availability is daily.
-References: GPM_1CTRMMTMI [doi:10.5067/GPM/TMI/TRMM/1C/05](https://doi.org/10.5067/GPM/TMI/TRMM/1C/05)
+References: GPM_1CTRMMTMI [doi:10.5067/GPM/TMI/TRMM/1C/07](https://doi.org/10.5067/GPM/TMI/TRMM/1C/07)
diff --git a/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Asc.md b/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Asc.md
index 3aa17c72b..ac54552dc 100644
--- a/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Asc.md
+++ b/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Asc.md
@@ -1,5 +1,7 @@
-The Precipitation Rate (Ascending) layer displays rain rate and snow rate measured in millimeters per hour (mm/hr).
+The Precipitation Rate (Ascending) layer displays rain rate and snow rate measured in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
-This layer is created from the new (GPM-formatted) TRMM product. It replaces the old TRMM_2A12 Version 5 is the current version of the data set. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals. The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors: + TMI (TRMM) + GMI, (GPM) + SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19) + AMSR2 (GCOM-W1) + MHS (NOAA 18,19) + MHS (METOP A,B) + ATMS (NPP) + SAPHIR (MT1) This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided. The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an a-priori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
+This layer is created from the new (GPM-formatted) TRMM product and replaces the old TRMM_2A12. Version 07 is the current version of the data set. The 2AGPROF (Goddard Profiling) algorithm is developed on GPM/GMI data, then modified to retrieve consistent precipitation and related science fields from other passive microwave sensors. This dataset features 2AGPROF retrievals from TRMM/TMI.
-References: GPM_2AGPROFTRMMTMI_CLIM [doi:10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/05](https://doi.org/10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/05)
+The spatial resolution is 13 km x 5 km, the imagery resolution is 2 km and temporal availability is daily.
+
+References: GPM_2AGPROFTRMMTMI_CLIM [doi:10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/07](https://doi.org/10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/07)
diff --git a/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Dsc.md b/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Dsc.md
index 6006dce67..050f27255 100644
--- a/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Dsc.md
+++ b/config/default/common/config/metadata/layers/trmm/TRMM_Precipitation_Rate_Dsc.md
@@ -1,5 +1,7 @@
-The Precipitation Rate (Descending) layer displays rain rate and snow rate measured in millimeters per hour (mm/hr).
+The Precipitation Rate (Descending) layer displays rain rate and snow rate measured in millimeters per hour (mm/hr). The layer shows both the Rain Rate and Snow Rate with two different legends. This layer provides snapshots of individual storms, including tropical cyclones and flood-producing systems.
-This layer is created from the new (GPM-formatted) TRMM product. It replaces the old TRMM_2A12 Version 5 is the current version of the data set. The "CLIM" products differ from their "regular" counterparts (without the "CLIM" in the name) by the ancillary data they use. They are Climate-Reference products, which requires homogeneous ancillary data over the climate time series. Hence, the ECMWF-Interim (European Centre for Medium-Range Weather Forecasts, 2-3 months lag behind the regular production) reanalysis is used as ancillary data to derive surface and atmospheric conditions required by the GPROF algorithm for the "CLIM" output. The GPROF databases are also adjusted accordingly for these climate-referenced retrievals. The 2AGPROF (Goddard Profiling) algorithm retrieves consistent precipitation and related science fields from the following GMI and partner passive microwave sensors: + TMI (TRMM) + GMI, (GPM) + SSMI (DMSP F15), SSMIS (DMSP F16, F17, F18, F19) + AMSR2 (GCOM-W1) + MHS (NOAA 18,19) + MHS (METOP A,B) + ATMS (NPP) + SAPHIR (MT1) This provides the bulk of the 3-hour coverage achieved by GPM. For each sensor, there are nearrealtime (NRT) products, standard products, and climate products. These differ only in the amount of data that are available within 3 hours, 48 hours, and 3 months of collection, as well as the ancillary data used. The NRT product uses GANAL forecast fields. Standard products use the GANAL analysis product, while the climate product uses ECMWF reanalysis in order to allow for consistent data records with earlier missions. These earlier data may be archived separately. The main strength of the product is the large sampling provided. The GPM radiometer algorithms are Bayesian-type algorithms. These algorithms search an a-priori database of potential rain profiles and retrieve a weighted average of these entries based upon the proximity of the observed brightness temperature (Tb) to the simulated Tb corresponding to each rain profile. By using the same a-priori database of rain profiles, with appropriate simulated Tb for each constellation sensor, the Bayesian method is completely parametric and thus well suited for GPM's constellation approach. The a-priori information will be supplied by the combined algorithm supplied by GPM's core satellite as soon after launch as feasible. Databases for V0 of the algorithm had to be constructed from various sources as described in the ATBD. The solution provides a mean rain rate as well as the vertical structure of cloud and precipitation hydrometeors and their uncertainty.
+This layer is created from the new (GPM-formatted) TRMM product and replaces the old TRMM_2A12. Version 07 is the current version of the data set. The 2AGPROF (Goddard Profiling) algorithm is developed on GPM/GMI data, then modified to retrieve consistent precipitation and related science fields from other passive microwave sensors. This dataset features 2AGPROF retrievals from TRMM/TMI.
-References: GPM_2AGPROFTRMMTMI_CLIM [doi:10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/05](https://doi.org/10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/05)
+The spatial resolution is 13 km x 5 km, the imagery resolution is 2 km and temporal availability is daily.
+
+References: GPM_2AGPROFTRMMTMI_CLIM [doi:10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/07](https://doi.org/10.5067/GPM/TMI/TRMM/GPROFCLIM/2A/07)
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/measurements/Brightness Temperature.json b/config/default/common/config/wv.json/measurements/Brightness Temperature.json
index ca9abf01e..0f31eb3ff 100644
--- a/config/default/common/config/wv.json/measurements/Brightness Temperature.json
+++ b/config/default/common/config/wv.json/measurements/Brightness Temperature.json
@@ -4,7 +4,7 @@
"id": "brightness-temperature",
"title": "Brightness Temperature",
"disableUnitConversion": true,
- "subtitle": "Aqua/AMSR-E, Aqua/MODIS, Terra/MODIS, GCOM-W1/AMSR2, GPM/GMI, NOAA-20/VIIRS, NOAA-20/VIIRS+CrIS, NOAA-21/VIIRS, TRMM, SMAP/Radar/Radiometer, Suomi NPP/VIIRS, Suomi NPP/VIIRS+CrIS, NOAA-15/AMSU-A, NOAA-16/AMSU-A, NOAA-17/AMSU-A",
+ "subtitle": "Aqua/AMSR-E, Aqua/MODIS, Terra/MODIS, GCOM-W1/AMSR2, GPM/GMI, NOAA-20/VIIRS, NOAA-20/VIIRS+CrIS, NOAA-21/VIIRS, TRMM/TMI, SMAP/Radar/Radiometer, Suomi NPP/VIIRS, Suomi NPP/VIIRS+CrIS, NOAA-15/AMSU-A, NOAA-16/AMSU-A, NOAA-17/AMSU-A",
"sources": {
"Aqua/AMSR-E": {
"id": "aqua-amsre",
@@ -109,7 +109,7 @@
,
"TRMM": {
"id": "trmm",
- "title": "TRMM",
+ "title": "TRMM/TMI",
"description": "",
"image": "",
"settings": [
diff --git a/config/default/common/config/wv.json/measurements/Precipitation Rate.json b/config/default/common/config/wv.json/measurements/Precipitation Rate.json
index d24f7e44f..bcd2309f0 100644
--- a/config/default/common/config/wv.json/measurements/Precipitation Rate.json
+++ b/config/default/common/config/wv.json/measurements/Precipitation Rate.json
@@ -3,7 +3,7 @@
"Precipitation Rate": {
"id": "precipitation-rate",
"title": "Precipitation Rate",
- "subtitle": "IMERG, GPM/GMI, GCOM-W1/AMSR2, TRMM, Aqua/AMSR-E, DMSP-F08/SSMI, DMSP-F10/SSMI, DMSP-F11/SSMI, DMSP-F13/SSMI, DMSP-F14/SSMI, DMSP-F15/SSMI, DMSP-F16/SSMIS, DMSP-F17/SSMIS, GLDAS, NLDAS, Merged Microwave Radiometers, MERRA-2",
+ "subtitle": "IMERG, GPM/GMI, GCOM-W1/AMSR2, TRMM/TMI, Aqua/AMSR-E, DMSP-F08/SSMI, DMSP-F10/SSMI, DMSP-F11/SSMI, DMSP-F13/SSMI, DMSP-F14/SSMI, DMSP-F15/SSMI, DMSP-F16/SSMIS, DMSP-F17/SSMIS, GLDAS, NLDAS, Merged Microwave Radiometers, MERRA-2",
"sources": {
"IMERG": {
"id": "imerg",
@@ -45,7 +45,7 @@
},
"TRMM": {
"id": "trmm",
- "title": "TRMM",
+ "title": "TRMM/TMI",
"description": "",
"image": "",
"settings": [