Interactive interface for browsing global, full-resolution satellite imagery
updated Carbon Dioxide to Cloud Multi Layer
minniewong39eb345fe29a
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Day.mdindex da710992b..58c12e61c 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Day.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Day.md@@ -1,5 +1,4 @@-#### Description-Carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and Earth's surface move in roughly the same direction as winds at the 500 hPa level. Carbon monoxide is a pollutant that can persist in the atmosphere for roughly one month and be transported large distances, and it plays a role in both air pollution and climate change. Carbon monoxide is produced in the incomplete combustion of carbon-containing fuels such as gasoline, natural gas, oil, coal, and wood. Humans contribute large quantities of carbon monoxide, mostly as a result of automobile emissions. Natural sources include volcanoes and wildfires. Carbon monoxide is the most abundant pollutant (by mass) in the Earth’s atmosphere.+The Carbon Monoxide (L2, 500hPa, Day) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.#### Image Resolution32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)@@ -17,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)--#### About AIRS-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.--More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).+Data Product: AIRS2RET_NRT [doi:10.5067/RAEHAOH4VZM5](https://doi.org/10.5067/RAEHAOH4VZM5); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Night.mdindex da710992b..3e7aa41ae 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Night.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Night.md@@ -1,5 +1,4 @@-#### Description-Carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and Earth's surface move in roughly the same direction as winds at the 500 hPa level. Carbon monoxide is a pollutant that can persist in the atmosphere for roughly one month and be transported large distances, and it plays a role in both air pollution and climate change. Carbon monoxide is produced in the incomplete combustion of carbon-containing fuels such as gasoline, natural gas, oil, coal, and wood. Humans contribute large quantities of carbon monoxide, mostly as a result of automobile emissions. Natural sources include volcanoes and wildfires. Carbon monoxide is the most abundant pollutant (by mass) in the Earth’s atmosphere.+The Carbon Monoxide (L2, 500hPa, Night) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.#### Image Resolution32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)@@ -17,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)--#### About AIRS-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.--More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).+Data Product: AIRS2RET_NRT [doi:10.5067/RAEHAOH4VZM5](https://doi.org/10.5067/RAEHAOH4VZM5); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Day.mdindex ec3bf38df..9f3196c24 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Day.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Day.md@@ -1,10 +1,8 @@-#### Description-Total Cloud Fraction is the product of cloud fractional coverage and cloud infrared emissivity. Low fraction can indicate either small, highly emissive clouds or more extensive but less emissive clouds. While AIRS can sense up to two cloud decks in a column of atmosphere, this plot shows the cloud fraction of all cloud decks present.+The Total Cloud Fraction (Day) layer is the product of cloud fractional coverage and cloud infrared emissivity. Low fraction can indicate either small, highly emissive clouds or more extensive but less emissive clouds. While AIRS can sense up to two cloud decks in a column of atmosphere, this plot shows the cloud fraction of all cloud decks present.#### Image Resolution32 km/pixel (AIRS Level 2 `CldFrcStd` is nominally 13.5 km/pixel, the data has been resampled into a 32 km/pixel visualization.)-#### Data ProductImage initially produced with NRT data. Science quality image replaces NRT when available.<br>Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>@@ -18,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)--#### About AIRS-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.--More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).+Data Product: AIRS2RET_NRT [doi:10.5067/RAEHAOH4VZM5](https://doi.org/10.5067/RAEHAOH4VZM5); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Night.mdindex a9336ccb7..31f67340a 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Night.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Total_Cloud_Fraction_Night.md@@ -1,6 +1,4 @@--#### Description-Total Cloud Fraction is the product of cloud fractional coverage and cloud infrared emissivity. Low fraction can indicate either small, highly emissive clouds or more extensive but less emissive clouds. While AIRS can sense up to two cloud decks in a column of atmosphere, this plot shows the cloud fraction of all cloud decks present.+The Total Cloud Fraction (Night) layer is the product of cloud fractional coverage and cloud infrared emissivity. Low fraction can indicate either small, highly emissive clouds or more extensive but less emissive clouds. While AIRS can sense up to two cloud decks in a column of atmosphere, this plot shows the cloud fraction of all cloud decks present.#### Image Resolution32 km/pixel (AIRS Level 2 `CldFrcStd` is nominally 13.5 km/pixel, the data has been resampled into a 32 km/pixel visualization.)@@ -18,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)--#### About AIRS-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.--More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).+Data Product: AIRS2RET_NRT [doi:10.5067/RAEHAOH4VZM5](https://doi.org/10.5067/RAEHAOH4VZM5); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_AIRS_AMSU_Monthly.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_AIRS_AMSU_Monthly.mdindex e69de29bb..fb2e77a8c 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_AIRS_AMSU_Monthly.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_AIRS_AMSU_Monthly.md@@ -0,0 +1,5 @@+The Carbon Dioxide (L3, Free Troposphere, Monthly) layer displays monthly Carbon Dioxide in the free troposphere. It is created from the AIRX3C2M data product which is the AIRS mid-tropospheric Carbon Dioxide (CO2) Level 3 Monthly Gridded Retrieval, from the AIRS and AMSU instruments on board of Aqua satellite. It is monthly gridded data at 2.5x2 degreee (lon)x(lat) grid cell size. The data is in mole fraction units (data x 10^6 =ppm in volume). This quantity is not a total column quantity because the sensitivity function of the AIRS mid-tropospheric CO2 retrieval system peaks over the altitude range 6-10 km. The quantity is what results when the true atmospheric CO2 profile is weighted, level-by-level, by the AIRS sensitivity function.++The Atmospheric Infrared Sounder (AIRS), in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California. More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).++References: AIRX3C2M [doi:10.5067/Aqua/AIRS/DATA339](https://doi.org/10.5067/Aqua/AIRS/DATA339)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_IR_Monthly.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_IR_Monthly.mdindex 8b1378917..b2b16cf49 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_IR_Monthly.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Dioxide_IR_Monthly.md@@ -1 +1,5 @@+The Carbon Dioxide (L3, Free Troposphere, Monthly) layer displays monthly Carbon Dioxide in the free troposphere. It is created from the AIRS3C2M data product which is the AIRS mid-tropospheric Carbon Dioxide (CO2) Level 3 Monthly Gridded Retrieval, from the AIRS instrument on board of Aqua satellite. It is a monthly gridded data, at 2.5x2 degreee (lon)x(lat) grid cell size. The data is in mole fraction units (data x 10^6 =ppm in volume). This quantity is not a total column quantity because the sensitivity function of the AIRS mid-tropospheric CO2 retrieval system peaks over the altitude range 6-10 km. The quantity is what results when the true atmospheric CO2 profile is weighted, level-by-level, by the AIRS sensitivity function.+The Atmospheric Infrared Sounder (AIRS), in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California. More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).++References: AIRS3C2M [doi:10.5067/Aqua/AIRS/DATA336](https://doi.org/10.5067/Aqua/AIRS/DATA336)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.mdindex e69de29bb..5eb1a4615 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md@@ -0,0 +1,14 @@+The Carbon Monoxide (L3, 500hPa, Day, Daily) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.++#### Data Product+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>+Field name: `COVMRLevStd`; pressure level is at element 7<br>+Resolution: 1 X 1 degree++#### Coverage+Spatial Coverage: Global<br>+Overpasses: Twice daily (day and night)<br>+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am++#### References+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.mdindex e69de29bb..039818e60 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md@@ -0,0 +1,14 @@+The Carbon Monoxide (L3, 500hPa, Night, Daily) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.++#### Data Product+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>+Field name: `COVMRLevStd`; pressure level is at element 7<br>+Resolution: 1 X 1 degree++#### Coverage+Spatial Coverage: Global<br>+Overpasses: Twice daily (day and night)<br>+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am++#### References+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.mdindex e69de29bb..b2dbbc06c 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md@@ -0,0 +1,17 @@+The Carbon Monoxide (L3, 500hPa, Day, Monthly) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.++#### Image Resolution+32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)++#### Data Product+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>+Field name: `COVMRLevStd`; pressure level is at element 7<br>+Resolution: 1 X 1 degree++#### Coverage+Spatial Coverage: Global<br>+Overpasses: Twice daily (day and night)<br>+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am++#### References+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.mdindex e69de29bb..80484110e 100644--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md@@ -0,0 +1,17 @@+The Carbon Monoxide (L3, 500hPa, Night, Monthly) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.++#### Image Resolution+32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)++#### Data Product+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>+Field name: `COVMRLevStd`; pressure level is at element 7<br>+Resolution: 1 X 1 degree++#### Coverage+Spatial Coverage: Global<br>+Overpasses: Twice daily (day and night)<br>+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am++#### References+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)diff --git a/config/default/common/config/metadata/layers/airs/CarbonMonoxide.md b/config/default/common/config/metadata/layers/airs/CarbonMonoxide.mdindex 51e27d32b..91c6fabe9 100644--- a/config/default/common/config/metadata/layers/airs/CarbonMonoxide.md+++ b/config/default/common/config/metadata/layers/airs/CarbonMonoxide.md@@ -1,31 +1,7 @@-### Carbon Monoxide (L2, 500 hPa, Day | Night)-Temporal coverage: 30 August 2002 - Present--#### Description-Carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and Earth's surface move in roughly the same direction as winds at the 500 hPa level. Carbon monoxide is a pollutant that can persist in the atmosphere for roughly one month and be transported large distances, and it plays a role in both air pollution and climate change. Carbon monoxide is produced in the incomplete combustion of carbon-containing fuels such as gasoline, natural gas, oil, coal, and wood. Humans contribute large quantities of carbon monoxide, mostly as a result of automobile emissions. Natural sources include volcanoes and wildfires. Carbon monoxide is the most abundant pollutant (by mass) in the Earth’s atmosphere.--#### Image Resolution-Nominal equatorial image resolution 31.25 km/pixel; imagery displayed in Worldview/Global Imagery Browse Services (GIBS) is 2 km.--#### Data Product-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>-Field name: `COVMRLevStd`; pressure level is at element 7<br>-Resolution: 45 km/pixel at nadir--#### Coverage-Spatial Coverage: Global<br>-Overpasses: Twice daily (day and night)<br>-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am--#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)+#### About Carbon Monoxide+These layers show carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and Earth's surface move in roughly the same direction as winds at the 500 hPa level. Carbon monoxide is a pollutant that can persist in the atmosphere for roughly one month and be transported large distances, and it plays a role in both air pollution and climate change. Carbon monoxide is produced in the incomplete combustion of carbon-containing fuels such as gasoline, natural gas, oil, coal, and wood. Humans contribute large quantities of carbon monoxide, mostly as a result of automobile emissions. Natural sources include volcanoes and wildfires. Carbon monoxide is the most abundant pollutant (by mass) in the Earth’s atmosphere.#### About AIRSAIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).--### Carbon Monoxide (L3, 500 hPa, Day | Night, Daily | Monthly)-Temporal coverage: 1 September 2002 - present or most recent complete month+More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/airs/CloudFraction.md b/config/default/common/config/metadata/layers/airs/CloudFraction.mdindex fe886ebcb..a0fdd5990 100644--- a/config/default/common/config/metadata/layers/airs/CloudFraction.md+++ b/config/default/common/config/metadata/layers/airs/CloudFraction.md@@ -1,27 +1,6 @@-### Total Cloud Fraction (L2, Day | Night)-Temporal coverage: 30 August 2002 - Present--#### Description+#### About Total Cloud FractionTotal Cloud Fraction is the product of cloud fractional coverage and cloud infrared emissivity. Low fraction can indicate either small, highly emissive clouds or more extensive but less emissive clouds. While AIRS can sense up to two cloud decks in a column of atmosphere, this plot shows the cloud fraction of all cloud decks present.-#### Image Resolution-Nominal equatorial image resolution 31.25 km/pixel; imagery displayed in Worldview/Global Imagery Browse Services (GIBS) is 2 km.--#### Data Product-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>-Field name: `CldFrcStd` (sum of 2 cloud decks)<br>-Resolution: 13.5 km/pixel at nadir--#### Coverage-Spatial Coverage: Global<br>-Overpasses: Twice daily (day and night)<br>-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am--#### References-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)-#### About AIRSAIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.diff --git a/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Day.md b/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Day.mdindex 7951cac04..1cb1f0993 100644--- a/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Day.md+++ b/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Day.md@@ -1 +1,7 @@+The Columnar Cloud Liquid Water (Day, Near Real-Time) layer is a measure of the columnar liquid water, as in clouds or rain, in the atmosphere in units of grams per square meter.++The AMSR2 instrument is a conically scanning passive microwave radiometer. This instrument senses microwave radiation for twelve channels and six frequencies ranging from 6.9 GHz to 89 GHz on board the Japan Aerospace Exploration Agency (JAXA) Global Change Observation Mission – Water 1 (GCOM-W1) satellite.++The imagery resolution is 2 km and sensor resolution is 6.25 km. The temporal resolution is daily.+References: [Dataset doi:10.5067/AMSRU/AU_OCEAN_NRT_R01](https://doi.org/10.5067/AMSRU/AU_OCEAN_NRT_R01)diff --git a/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Night.md b/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Night.mdindex d02b5a17c..314c00592 100644--- a/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Night.md+++ b/config/default/common/config/metadata/layers/amsr2/AMSRU2_Cloud_Liquid_Water_Night.md@@ -1 +1,7 @@+The Columnar Cloud Liquid Water (Night, Near Real-Time) layer is a measure of the columnar liquid water, as in clouds or rain, in the atmosphere in units of grams per square meter.++The AMSR2 instrument is a conically scanning passive microwave radiometer. This instrument senses microwave radiation for twelve channels and six frequencies ranging from 6.9 GHz to 89 GHz on board the Japan Aerospace Exploration Agency (JAXA) Global Change Observation Mission – Water 1 (GCOM-W1) satellite.++The imagery resolution is 2 km and sensor resolution is 6.25 km. The temporal resolution is daily.+References: [Dataset doi:10.5067/AMSRU/AU_OCEAN_NRT_R01](https://doi.org/10.5067/AMSRU/AU_OCEAN_NRT_R01)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/amsr2/CloudLiquidWater.md b/config/default/common/config/metadata/layers/amsr2/CloudLiquidWater.mddeleted file mode 100644index 1a0cf9e05..000000000--- a/config/default/common/config/metadata/layers/amsr2/CloudLiquidWater.md+++ /dev/null@@ -1,4 +0,0 @@-### AMSR2 Columnar Cloud Liquid Water (Day | Night)-Temporal coverage: 2 July 2012 - present--References: doi: [10.5067/AMSRU/AU_OCEAN_NRT_R01](https://doi.org/10.5067/AMSRU/AU_OCEAN_NRT_R01)diff --git a/config/default/common/config/metadata/layers/merra/CarbonMonoxide.md b/config/default/common/config/metadata/layers/merra/CarbonMonoxide.mddeleted file mode 100644index d3cb85d4d..000000000--- a/config/default/common/config/metadata/layers/merra/CarbonMonoxide.md+++ /dev/null@@ -1,2 +0,0 @@-### Carbon Monoxide Emission ENSEMBLE (Monthly)-Temporal coverage: January 1980 - Present (most recent complete month)diff --git a/config/default/common/config/metadata/layers/merra/MERRA2_Carbon_Monoxide_Emission_Monthly.md b/config/default/common/config/metadata/layers/merra/MERRA2_Carbon_Monoxide_Emission_Monthly.mdindex e69de29bb..fffcbd531 100644--- a/config/default/common/config/metadata/layers/merra/MERRA2_Carbon_Monoxide_Emission_Monthly.md+++ b/config/default/common/config/metadata/layers/merra/MERRA2_Carbon_Monoxide_Emission_Monthly.md@@ -0,0 +1,3 @@+The Carbon Monoxide Emission ENSEMBLE (Monthly) layer is created from M2TMNXCHM (or tavgM_2d_chm_Nx), a time-averaged 2-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2. This data collection consists of assimilated carbon monoxide and ozone diagnostics, such as properties of carbon monoxide (column burden, emission, chemical production, and surface concentration), and total column ozone. The collection also includes variance of certain parameters. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month.++References: M2TMNXCHM [doi:10.5067/WMT31RKEXK8I](https://doi.org/10.5067/WMT31RKEXK8I)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/merra/MERRA2_ISCCP_Cloud_Albedo_Monthly.md b/config/default/common/config/metadata/layers/merra/MERRA2_ISCCP_Cloud_Albedo_Monthly.mdindex e69de29bb..927cc1c56 100644--- a/config/default/common/config/metadata/layers/merra/MERRA2_ISCCP_Cloud_Albedo_Monthly.md+++ b/config/default/common/config/metadata/layers/merra/MERRA2_ISCCP_Cloud_Albedo_Monthly.md@@ -0,0 +1,3 @@+The ISCCP Cloud Albedo (Monthly) layer is created from the M2TMNXCSP (or tavgM_2d_csp_Nx), a time-averaged 2-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This data collection consists of parameters from Cloud Feedback Model Intercomparison Project (CFMIP) Observations Simulator Package (COSP), such as International Satellite Cloud Climatology Project (ISCCP) total cloud area fraction, MODIS cloud fraction water (ice) mean, MODIS cloud fraction low (mid,high) mean, MODIS cloud particle size water (ice) mean. The collection also includes variance of certain parameters. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4. The dataset covers the period of 1980-present with the latency of ~3 weeks after the end of a month.++References: M2TMNXCSP [doi:10.5067/BZPOTGJOQKLU](https://doi.org/10.5067/BZPOTGJOQKLU)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/mls/CO.md b/config/default/common/config/metadata/layers/mls/CO.mddeleted file mode 100644index 397ec6052..000000000--- a/config/default/common/config/metadata/layers/mls/CO.md+++ /dev/null@@ -1,10 +0,0 @@-### MLS Carbon Monoxide (CO) Mixing Ratio 215hPa (Day | Night)-Temporal coverage: 9 May 2013 - present--The Microwave Limb Sounder (MLS) Carbon Monoxide (CO) Mixing Ratio layer at 215 hPa (hectopascals) indicates carbon monoxide levels at the vertical atmospheric pressure level of 215hPa, and is measured in parts per billion by volume (ppbv).--Carbon Monoxide (CO) is a poisonous, odorless and colorless gas. CO is produced by incomplete combustion of fossil fuels and biomass burning. It is a strong greenhouse gas. It is one of the longest-lived, naturally occurring atmospheric carbon compounds. In the atmosphere, CO is produced when methane reacts with atmospheric hydroxyl (OH) in the troposphere. CO is a long-lived tracer that is valuable for diagnosing atmospheric transport and identifying the source of air masses. The MLS CO data help quantify long-range transport of pollution in the upper troposphere and the impact of upwelling from the troposphere and downwelling from the mesosphere on stratospheric chemistry.--The MLS Carbon Monoxide (CO) Mixing Ratio 215hPa layer is derived from the MLS Carbon Monoxide product (ML2CO_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, temporal resolution is twice daily (day and night).--References: [GES DISC - ML2CO_NRT: MLS/Aura Near-Real-Time L2 Carbon Monoxide (CO) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V004/summary); [MLS - Carbon Monoxide](https://mls.jpl.nasa.gov/products/co_product.php)diff --git a/config/default/common/config/metadata/layers/mls/CarboMonoxide.md b/config/default/common/config/metadata/layers/mls/CarboMonoxide.mdnew file mode 100644index 000000000..919184241--- /dev/null+++ b/config/default/common/config/metadata/layers/mls/CarboMonoxide.md@@ -0,0 +1,2 @@+#### About Carbon Monoxide+Carbon Monoxide (CO) is a poisonous, odorless and colorless gas. CO is produced by incomplete combustion of fossil fuels and biomass burning. It is a strong greenhouse gas. It is one of the longest-lived, naturally occurring atmospheric carbon compounds. In the atmosphere, CO is produced when methane reacts with atmospheric hydroxyl (OH) in the troposphere. CO is a long-lived tracer that is valuable for diagnosing atmospheric transport and identifying the source of air masses. The MLS CO data help quantify long-range transport of pollution in the upper troposphere and the impact of upwelling from the troposphere and downwelling from the mesosphere on stratospheric chemistry.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.mdindex f1ccfebb1..675676462 100644--- a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md+++ b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md@@ -1,7 +1,5 @@The Microwave Limb Sounder (MLS) Carbon Monoxide (CO) Mixing Ratio layer at 215 hPa (hectopascals) indicates carbon monoxide levels at the vertical atmospheric pressure level of 215hPa, and is measured in parts per billion by volume (ppbv).-Carbon Monoxide (CO) is a poisonous, odorless and colorless gas. CO is produced by incomplete combustion of fossil fuels and biomass burning. It is a strong greenhouse gas. It is one of the longest-lived, naturally occurring atmospheric carbon compounds. In the atmosphere, CO is produced when methane reacts with atmospheric hydroxyl (OH) in the troposphere. CO is a long-lived tracer that is valuable for diagnosing atmospheric transport and identifying the source of air masses. The MLS CO data help quantify long-range transport of pollution in the upper troposphere and the impact of upwelling from the troposphere and downwelling from the mesosphere on stratospheric chemistry.-The MLS Carbon Monoxide (CO) Mixing Ratio 215hPa layer is derived from the MLS Carbon Monoxide product (ML2CO_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [GES DISC - ML2CO_NRT: MLS/Aura Near-Real-Time L2 Carbon Monoxide (CO) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V004/summary); [MLS - Carbon Monoxide](https://mls.jpl.nasa.gov/products/co_product.php)+References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V004/summary); [MLS - Carbon Monoxide](https://mls.jpl.nasa.gov/products/co_product.php)diff --git a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.mdindex f1ccfebb1..675676462 100644--- a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md+++ b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md@@ -1,7 +1,5 @@The Microwave Limb Sounder (MLS) Carbon Monoxide (CO) Mixing Ratio layer at 215 hPa (hectopascals) indicates carbon monoxide levels at the vertical atmospheric pressure level of 215hPa, and is measured in parts per billion by volume (ppbv).-Carbon Monoxide (CO) is a poisonous, odorless and colorless gas. CO is produced by incomplete combustion of fossil fuels and biomass burning. It is a strong greenhouse gas. It is one of the longest-lived, naturally occurring atmospheric carbon compounds. In the atmosphere, CO is produced when methane reacts with atmospheric hydroxyl (OH) in the troposphere. CO is a long-lived tracer that is valuable for diagnosing atmospheric transport and identifying the source of air masses. The MLS CO data help quantify long-range transport of pollution in the upper troposphere and the impact of upwelling from the troposphere and downwelling from the mesosphere on stratospheric chemistry.-The MLS Carbon Monoxide (CO) Mixing Ratio 215hPa layer is derived from the MLS Carbon Monoxide product (ML2CO_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [GES DISC - ML2CO_NRT: MLS/Aura Near-Real-Time L2 Carbon Monoxide (CO) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V004/summary); [MLS - Carbon Monoxide](https://mls.jpl.nasa.gov/products/co_product.php)+References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V004/summary); [MLS - Carbon Monoxide](https://mls.jpl.nasa.gov/products/co_product.php)diff --git a/config/default/common/config/metadata/layers/modis/Chlorophyll_a.md b/config/default/common/config/metadata/layers/modis/Chlorophyll_a.mdindex d858b5e41..dc418438b 100644--- a/config/default/common/config/metadata/layers/modis/Chlorophyll_a.md+++ b/config/default/common/config/metadata/layers/modis/Chlorophyll_a.md@@ -1,19 +1,4 @@-### MODIS (Terra/Aqua) Chlorophyll *a* (L2)-Temporal coverage: 1 April - 3 April 2020; 14 May 2020 - present+#### About Chlorophyll *a*+Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.-The MODIS Chlorophyll *a* layers provide the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.--The MODIS Level 2 Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.--References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018); MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018);- [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)---### MODIS (Terra/Aqua) Chlorophyll *a*-Temporal Coverage: 2 July 2013 - present--The MODIS Chlorophyll *a* layers provide the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.--The MODIS Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.--References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018); MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018); [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)diff --git a/config/default/common/config/metadata/layers/modis/CloudEffectiveRadius.md b/config/default/common/config/metadata/layers/modis/CloudEffectiveRadius.mddeleted file mode 100644index 4a1b6ab3c..000000000--- a/config/default/common/config/metadata/layers/modis/CloudEffectiveRadius.md+++ /dev/null@@ -1,10 +0,0 @@-### MODIS (Aqua/Terra) Cloud Effective Radius (PCL, 3.7 micron and 3.7 micron PCL)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.--The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.--The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.--References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)diff --git a/config/default/common/config/metadata/layers/modis/CloudFraction.md b/config/default/common/config/metadata/layers/modis/CloudFraction.mddeleted file mode 100644index ae9e511af..000000000--- a/config/default/common/config/metadata/layers/modis/CloudFraction.md+++ /dev/null@@ -1,8 +0,0 @@-### MODIS (Aqua/Terra) Cloud Fraction (Day | Night)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--The MODIS Cloud Fraction is a measure of the percentage of Earth’s surface covered by clouds. Cloud Fraction is important in determining the amount of sunlight that reaches the Earth’s surface, the amount of sunlight reflected back into space, and the amount of heat escaping from the surface and atmosphere back into space. Clouds play a very important role in the Earth’s energy budget and climate system. The MODIS Cloud Fraction layer indicates the fraction of pixels within a 25 square kilometer box (5x5 1 km pixels) that are determined to be confident or probably cloudy by the MOD/MYD35 1km x 1km Cloud Mask.--The MODIS Cloud Fraction layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites and for day and night overpasses. The sensor/algorithm resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.--References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)diff --git a/config/default/common/config/metadata/layers/modis/CloudMultiLayerFlag.md b/config/default/common/config/metadata/layers/modis/CloudMultiLayerFlag.mddeleted file mode 100644index e69de29bb..000000000diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Chlorophyll_A.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Chlorophyll_A.mdindex f220e7dbb..07feec1ac 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Chlorophyll_A.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Chlorophyll_A.md@@ -1,5 +1,5 @@-The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.+The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean.The MODIS Level 2 Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018); [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius.mdindex e1dc90024..9a87d8774 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius.md@@ -1,7 +1,5 @@The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius retrieval using Band 7 (2.1 μm). It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16.mdindex c1a5c9cf5..e7a719a5d 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16.md@@ -1 +1,5 @@-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1.6 micron layer retrieval using Band 6 (1.6 μm).++The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.++References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_1621.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_1621.mdindex c1a5c9cf5..d9e0ad91d 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_1621.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_1621.md@@ -1 +1,5 @@-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1621 Algorithm two channel retrieval using Band 7 (2.1 μm) and Band 6 (1.6 μm).++The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.++References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16_PCL.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16_PCL.mdindex c1a5c9cf5..7ebe4390f 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16_PCL.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_16_PCL.md@@ -1 +1,5 @@-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1.6 micron PCL (partly cloudy) layer retrieval using Band 6 (1.6 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.++The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.++References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37.mdindex be3bdbbe4..27099afc4 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37.md@@ -1,7 +1,5 @@The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm). It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37_PCL.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37_PCL.mdindex 615c6467f..ddd8b422f 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37_PCL.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_37_PCL.md@@ -1,7 +1,5 @@The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 3.7 micron PCL (partly cloudy) layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges. It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL.mdindex 1a3200971..18d58dd37 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL.md@@ -1,7 +1,5 @@The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges. It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL_1621.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL_1621.mdindex c1a5c9cf5..74305a262 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL_1621.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Effective_Radius_PCL_1621.md@@ -1 +1,5 @@-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1621 Algorithm two channel retrieval using Band 7 (2.1 μm) and Band 6 (1.6 μm) from points identified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.++The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.++References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Day.mdindex 5f2808879..597e77c57 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Day.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Day.md@@ -2,4 +2,4 @@ The MODIS Cloud Fraction is a measure of the percentage of Earth’s surface covThe MODIS Cloud Fraction layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites and for day and nighttime overpasses. The sensor/algorithm resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Night.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Night.mdindex 5f2808879..597e77c57 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Night.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Fraction_Night.md@@ -2,4 +2,4 @@ The MODIS Cloud Fraction is a measure of the percentage of Earth’s surface covThe MODIS Cloud Fraction layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites and for day and nighttime overpasses. The sensor/algorithm resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Multi_Layer_Flag.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Multi_Layer_Flag.mdindex 7c709a745..702601b69 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Multi_Layer_Flag.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Cloud_Multi_Layer_Flag.md@@ -2,4 +2,4 @@ The MODIS Cloud Multi Layer Flag layer indicates the detection of multi layer clThe MODIS Cloud Multi Layer Flag layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [[MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MYD06_L2 NRT [doi:10.5067/MODIS/MYD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MYD06_L2.NRT.061); MYD06_L2 [doi:10.5067/MODIS/MYD06_L2.061](https://doi.org/10.5067/MODIS/MYD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L2_Chlorophyll_A.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L2_Chlorophyll_A.mdindex dbfd20012..8b77efbbf 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L2_Chlorophyll_A.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L2_Chlorophyll_A.md@@ -1,5 +1,5 @@-The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.+The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean.The MODIS Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018); [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: MODISA_L2_OC [doi:10.5067/AQUA/MODIS/L2/OC/2018](https://doi.org/10.5067/AQUA/MODIS/L2/OC/2018)diff --git a/config/default/common/config/metadata/layers/modis/terra/CloudEffectiveRadius.md b/config/default/common/config/metadata/layers/modis/terra/CloudEffectiveRadius.mdnew file mode 100644index 000000000..fbed26d6a--- /dev/null+++ b/config/default/common/config/metadata/layers/modis/terra/CloudEffectiveRadius.md@@ -0,0 +1 @@+**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/CloudMultiLayerFlag.md b/config/default/common/config/metadata/layers/modis/terra/CloudMultiLayerFlag.mdnew file mode 100644index 000000000..fbed26d6a--- /dev/null+++ b/config/default/common/config/metadata/layers/modis/terra/CloudMultiLayerFlag.md@@ -0,0 +1 @@+**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Chlorophyll_A.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Chlorophyll_A.mdindex 381d83046..8c816ed9b 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Chlorophyll_A.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Chlorophyll_A.md@@ -1,5 +1,5 @@-The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.+The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean.The MODIS Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-References: MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018); [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius.mdindex 4df6587b3..788e0952e 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius.md@@ -1,11 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).-------The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius retrieval using Band 7 (2.1 μm). It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.--The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.+**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius retrieval using Band 7 (2.1 μm). It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16.mdindex 9b5e3c69e..29aae27e5 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16.md@@ -1,5 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1.6 micron layer retrieval using Band 6 (1.6 μm).----+The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of file+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_1621.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_1621.mdindex 480e37d09..dcd9b8ccd 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_1621.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_1621.md@@ -1,5 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1621 Algorithm two channel retrieval using Band 7 (2.1 μm) and Band 6 (1.6 μm).----+The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16_PCL.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16_PCL.mdindex 480e37d09..4a1aaedc0 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16_PCL.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_16_PCL.md@@ -1,5 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1.6 micron PCL (partly cloudy) layer retrieval using Band 6 (1.6 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.----+The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37.mdindex 10f6ba0ad..f74f7820f 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37.md@@ -1,11 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm). It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37_PCL.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37_PCL.mdindex cfc88d5fb..7f8524885 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37_PCL.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_37_PCL.md@@ -1,11 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 3.7 micron PCL (partly cloudy) layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges. It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL.mdindex 494eea067..a4ae92727 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL.md@@ -1,11 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges. It is simultaneously retrieved with Cloud Optical Thickness by simultaneously measuring the reflection function of a non-absorbing and absorbing spectral channel (e.g., Visible/Near Infrared (VIS/NIR) and Shortwave Infrared (SWIR), respectively) and comparing the resulting measurements with theoretical forward model calculations. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.-The MODIS Cloud Particle Effective Radius layers available are: (1) the Cloud Effective Radius retrieval using Band 7 (2.1 μm); (2) the Cloud Effective Radius PCL (partly cloudy) retrieval using Band 7 (2.1 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges; (3) the Cloud Effective Radius 3.7 micron layer retrieval using Band 20 (3.7 μm); and (4) the Cloud Effective Radius 3.7 micron PCL layer retrieval using Band 20 (3.7 μm) for pixels classified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.-The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL_1621.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL_1621.mdindex 480e37d09..25f1139c5 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL_1621.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Effective_Radius_PCL_1621.md@@ -1,5 +1,6 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).+The MODIS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. This layer is the Cloud Effective Radius 1621 Algorithm two channel retrieval using Band 7 (2.1 μm) and Band 6 (1.6 μm) from points identified as either partly cloudy from 250 m cloud mask test or 1 km cloud edges.----+The MODIS Cloud Effective Radius layers are available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor/algorithm resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.++References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Day.mdindex 5f2808879..3348eb647 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Day.md@@ -2,4 +2,4 @@ The MODIS Cloud Fraction is a measure of the percentage of Earth’s surface covThe MODIS Cloud Fraction layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites and for day and nighttime overpasses. The sensor/algorithm resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Night.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Night.mdindex 5f2808879..3348eb647 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Night.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Fraction_Night.md@@ -2,4 +2,4 @@ The MODIS Cloud Fraction is a measure of the percentage of Earth’s surface covThe MODIS Cloud Fraction layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites and for day and nighttime overpasses. The sensor/algorithm resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Multi_Layer_Flag.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Multi_Layer_Flag.mdindex 8d4d44913..f3f55e3fc 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Multi_Layer_Flag.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Cloud_Multi_Layer_Flag.md@@ -1,9 +1,5 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------The MODIS Cloud Multi Layer Flag layer indicates the detection of multi layer clouds from MODIS shortwave observations expressed through 9 categories ranging from single layer cloud to the lowest confidence multi-layer cloud to the highest confidence multi-layer cloud with a range of intermediary confidence levels. This layer is useful for identifying areas of cloud overlap and flagging pixels where cloud microphysical retrievals would be adversely affected by cloud overlap.The MODIS Cloud Multi Layer Flag layer is available from both the Terra (MOD06) and Aqua (MYD06) satellites for daytime overpasses. The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud); [MODIS Cloud Optical Properties: User Guide for the Collection 6 Level-2 MOD06/MYD06 Product and Associated Level-3 Datasets: July 2018](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MODISCloudOpticalPropertyUserGuideFinal_v1.1.pdf); [Cloud Top Properties and Cloud Phase Algorithm Theoretical Basis Document: May 2015](https://modis-atmos.gsfc.nasa.gov/sites/default/files/ModAtmo/MOD06-ATBD_2015_05_01_1.pdf)+References: MOD06_L2 NRT [doi:10.5067/MODIS/MOD06_L2.NRT.061](https://doi.org/10.5067/MODIS/MOD06_L2.NRT.061); MOD06_L2 [doi:10.5067/MODIS/MOD06_L2.061](https://doi.org/10.5067/MODIS/MOD06_L2.061); [MODIS Atmosphere - Cloud (06_L2)](https://modis-atmos.gsfc.nasa.gov/products/cloud)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2_Chlorophyll_A.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2_Chlorophyll_A.mdindex 172d67503..352883a06 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2_Chlorophyll_A.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2_Chlorophyll_A.md@@ -1,5 +1,5 @@-The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The MODIS Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.+The MODIS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean.The MODIS Level 2 Chlorophyll *a* product is available from both the Terra and Aqua satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-References: MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018); [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: MODIST_L2_OC [doi:10.5067/TERRA/MODIS/L2/OC/2018](https://doi.org/10.5067/TERRA/MODIS/L2/OC/2018)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/mopitt/CarbonMonoxide.md b/config/default/common/config/metadata/layers/mopitt/CarbonMonoxide.mdindex 8cba052be..fc7839ee7 100644--- a/config/default/common/config/metadata/layers/mopitt/CarbonMonoxide.md+++ b/config/default/common/config/metadata/layers/mopitt/CarbonMonoxide.md@@ -1,23 +1,5 @@-### Carbon Monoxide (L2, Daily, Day/Night, Total Column)+#### About Carbon Monoxide+Carbon Monoxide (CO) is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.-The MOPITT Carbon Monoxide (Level 2, Daily, Day/Night, Total Column) layer shows the amount of carbon monoxide (CO) present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>) for the Day and Night overpasses, in near real-time. MOPITT Near Real Time (NRT) measurements use thermal-infrared radiation at 4.7 µm to produce CO total column abundance. CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.--MOPITT is an instrument flying on NASA's Earth Observing System Terra satellite, measuring tropospheric carbon monoxide (CO) on the global scale. MOPITT measurements enable scientists to analyze the distribution, transport, sources and sinks of CO, a trace gas produced by methane oxidation, fossil fuel consumption and biomass burning. MOPITT has been operational since March 2000. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.--References: [Earthdata - Measurements of Pollution in the Troposphere (MOPITT) Near real-time data](https://earthdata.nasa.gov/earth-observation-data/near-real-time/download-nrt-data/mopitt-nrt)--### Carbon Monoxide (Daily | Monthly, Day | Night, Surface Mixing Ratio)-Temporal coverage: 1 March 2000 - present (Daily); March 2000 - present (Monthly)--The MOPITT Carbon Monoxide (CO), Surface Mixing Ratio layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.--The MOPITT Carbon Monoxide, Surface Mixing Ratio layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily and monthly (with day and night layers).--### Carbon Monoxide (Daily | Monthly, Day | Night, Total Column)-Temporal Coverage: 1 March 2000 - present (Daily); March 2000 - present (Monthly)--The MOPITT Carbon Monoxide (CO), Total Column layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.--The MOPITT Carbon Monoxide, Total Column layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The total column is calculated by integrating the retrieved mixing ratio profiles from the 9 standard MOPITT pressure levels, 900, 800, 700, 600, 500, 400, 300, 200, and 100 hPa and at the surface and are not retrieved independently. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily and monthly (with day and night layers).--References: [doi: 10.5067/TERRA/MOPITT/MOP03J\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [doi: 10.5067/TERRA/MOPITT/MOP03JM\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+#### About MOPITT+Measurement of Pollution in the Troposphere (MOPITT) is an instrument flying on NASA's Earth Observing System Terra satellite, measuring tropospheric carbon monoxide (CO) on the global scale. MOPITT measurements enable scientists to analyze the distribution, transport, sources and sinks of CO, a trace gas produced by methane oxidation, fossil fuel consumption and biomass burning. MOPITT has been operational since March 2000. MOPITT’s spatial resolution is 22 km at nadir and it ‘sees’ the Earth in swaths that are 640 km wide. Moreover, it can measure the concentrations of carbon monoxide in 5-km layers down a vertical column of atmosphere, to help scientists track the gas back to its sources.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Day.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Day.mdindex 71b8a2e11..c54c15af4 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Day.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Day.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Daily, Day, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Daily, Day, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv).The MOPITT Carbon Monoxide (Daily, Day, Surface Mixing Ratio) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.-References: [doi: 10.5067/TERRA/MOPITT/MOP03J\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03J_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03J_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Night.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Night.mdindex dfa2ffb46..53681cf8f 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Night.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Surface_Mixing_Ratio_Night.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Daily, Night, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Daily, Night, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv).The MOPITT Carbon Monoxide (Daily, Night, Surface Mixing Ratio) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.-References: [doi: 10.5067/TERRA/MOPITT/MOP03J\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03J_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03J_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Day.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Day.mdindex cbffa090b..12d4b6017 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Day.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Day.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Daily, Day, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Daily, Day, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>).The MOPITT Carbon Monoxide (Daily, Day, Total Column) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The total column is calculated by integrating the retrieved mixing ratio profiles from the 9 standard MOPITT pressure levels, 900, 800, 700, 600, 500, 400, 300, 200, and 100 hPa and at the surface and are not retrieved independently. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.-References: [doi: 10.5067/TERRA/MOPITT/MOP03J\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03J_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03J_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_L2.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_L2.mdindex fafaba85e..d1e545352 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_L2.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_L2.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (Level 2, Daily, Day/Night, Total Column) layer shows the amount of carbon monoxide (CO) present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>) for the Day and Night overpasses, in near real-time. MOPITT Near Real Time (NRT) measurements use thermal-infrared radiation at 4.7 µm to produce CO total column abundance. CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (Level 2, Daily, Day/Night, Total Column) layer shows the amount of carbon monoxide (CO) present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>) for the Day and Night overpasses, in near real-time. MOPITT Near Real Time (NRT) measurements use thermal-infrared radiation at 4.7 µm to produce CO total column abundance.-MOPITT is an instrument flying on NASA's Earth Observing System Terra satellite, measuring tropospheric carbon monoxide (CO) on the global scale. MOPITT measurements enable scientists to analyze the distribution, transport, sources and sinks of CO, a trace gas produced by methane oxidation, fossil fuel consumption and biomass burning. MOPITT has been operational since March 2000. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.+The MOPITT Carbon Monoxide (L2, Daily, Day/Night, Total Column) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.-References: [Measurements of Pollution in the Troposphere (MOPITT) Near real-time data - Earthdata](https://earthdata.nasa.gov/earth-observation-data/near-real-time/download-nrt-data/mopitt-nrt)+References: [MOP02R_NRT] (https://cmr.earthdata.nasa.gov/search/concepts/C1398625065-MOPITT.html)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Night.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Night.mdindex aa16ce32e..88915f05a 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Night.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Daily_Total_Column_Night.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Daily, Night, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Daily, Night, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>).The MOPITT Carbon Monoxide (Daily, Night, Total Column) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The total column is calculated by integrating the retrieved mixing ratio profiles from the 9 standard MOPITT pressure levels, 900, 800, 700, 600, 500, 400, 300, 200, and 100 hPa and at the surface and are not retrieved independently. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is daily.-References: [doi: 10.5067/TERRA/MOPITT/MOP03J\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03J_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03J_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03J_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Day.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Day.mdindex 9e1603c7f..d25b441d4 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Day.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Day.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Monthly, Day, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Monthly, Day, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv).The MOPITT Carbon Monoxide (Monthly, Day, Surface Mixing Ratio) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is monthly.-References: [doi: 10.5067/TERRA/MOPITT/MOP03JM\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03JM_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03JM_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Night.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Night.mdindex 79f094a42..4dc30b099 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Night.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Surface_Mixing_Ratio_Night.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Monthly, Night, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Monthly, Night, Surface Mixing Ratio) layer shows the amount of carbon monoxide present at the Earth’s surface in the lower atmosphere (troposphere) and is measured in parts per billion by volume (ppbv).The MOPITT Carbon Monoxide (Monthly, Night, Surface Mixing Ratio) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is monthly.-References: [doi: 10.5067/TERRA/MOPITT/MOP03JM\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03JM_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03JM_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Day.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Day.mdindex aba2bf1ab..21268bf3d 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Day.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Day.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Monthly, Day, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Monthly, Day, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>).The MOPITT Carbon Monoxide (Monthly, Day, Total Column)layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The total column is calculated by integrating the retrieved mixing ratio profiles from the 9 standard MOPITT pressure levels, 900, 800, 700, 600, 500, 400, 300, 200, and 100 hPa and at the surface and are not retrieved independently. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is monthly.-References: [doi: 10.5067/TERRA/MOPITT/MOP03JM\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03JM_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03JM_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Night.md b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Night.mdindex 5e815ed2b..9621abeb9 100644--- a/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Night.md+++ b/config/default/common/config/metadata/layers/mopitt/MOPITT_CO_Monthly_Total_Column_Night.md@@ -1,5 +1,5 @@-The MOPITT Carbon Monoxide (CO) (Monthly, Night, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>). CO is a trace gas produced by methane oxidation, fossil fuel consumption (emitted from factories and cars) and biomass burning (from forest fires and agricultural burning). These measurements are useful for analyzing the distribution, transport, sources and sinks of CO in the troposphere and can be used to observe how it interacts with land and ocean biospheres. CO hinders the atmosphere’s natural ability to rid itself of harmful pollutants.+The MOPITT Carbon Monoxide (CO) (Monthly, Night, Total Column) layer shows the amount of carbon monoxide present in the total vertical column of the lower atmosphere (troposphere) and is measured in mole per square centimeter (mol/cm<sup>2</sup>).The MOPITT Carbon Monoxide (Monthly, Night, Total Column) layer is available from the Measurements of Pollution in the Troposphere (MOPITT) instrument on the Terra satellite. The total column is calculated by integrating the retrieved mixing ratio profiles from the 9 standard MOPITT pressure levels, 900, 800, 700, 600, 500, 400, 300, 200, and 100 hPa and at the surface and are not retrieved independently. The sensor resolution is 22 km at nadir, imagery resolution is 2 km, and the temporal resolution is monthly.-References: [doi: 10.5067/TERRA/MOPITT/MOP03JM\_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)+References: MOP03JM_L3.008 [doi:10.5067/TERRA/MOPITT/MOP03JM_L3.008](https://doi.org/10.5067/TERRA/MOPITT/MOP03JM_L3.008); [MOPITT Version 8 Product User's Guide](https://www2.acom.ucar.edu/sites/default/files/mopitt/v8_users_guide_201812.pdf); [NCAR|UCAR: Measurements of Pollution in the Troposphere (MOPITT)](https://www2.acom.ucar.edu/mopitt); [NASA: MOPITT](https://terra.nasa.gov/about/terra-instruments/mopitt)diff --git a/config/default/common/config/metadata/layers/oco2/CarbonDioxide.md b/config/default/common/config/metadata/layers/oco2/CarbonDioxide.mddeleted file mode 100644index 315cce7b9..000000000--- a/config/default/common/config/metadata/layers/oco2/CarbonDioxide.md+++ /dev/null@@ -1,18 +0,0 @@-### Carbon Dioxide (Difference from Global Mean)--The OCO-2 Carbon Dioxide (Difference from Global Mean) is a layer that combines OCO-2 XCO<sub>2</sub> (column-averaged dry-air mole fraction) and an estimated daily global trend XCO<sub>2</sub> value that is produced by the National Oceanic and Atmospheric Administration Earth System Research Laboratory Global Monitoring Division (NOAA ESRL GMD). It is calculated from daily averaged CO<sub>2</sub> data from four surface stations and is subtracted from the OCO-2 XCO<sub>2</sub> in order to provide a product that visualizes smaller variations in XCO<sub>2</sub> than the raw XCO<sub>2</sub> product. This is done because increasing atmospheric CO<sub>2</sub> concentrations has resulted in a large range of XCO<sub>2</sub> values over the OCO-2 record.--Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourth most abundant component of dry air (after nitrogen, oxygen and argon). CO<sub>2</sub> is an important greenhouse gas that helps trap heat in the atmosphere. As a part of the carbon cycle, CO<sub>2</sub> can be emitted (e.g. from respiration by plants and soils or from wildfires) or absorbed (e.g. from plant photosynthesis or by dissolving into the oceans). Human activities such as the combustion of fossil fuels and biomass burning are sources of CO<sub>2</sub>.--The Orbiting Carbon Observatory-2 (OCO-2) is a three-channel imaging grating spectrometer that collects cloud-free XCO<sub>2</sub> observations continuously over the globe by measuring reflected sunlight in the near-infrared. The OCO-2 Carbon Dioxide parameter is taken from the OCO-2 Level 2 Lite product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.--References: [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)--### Carbon Dioxide (Total Column Average)-The OCO-2 Carbon Dioxide (Total Column Average) layer displays the column-averaged dry-air mole fraction of carbon dioxide (XCO<sub>2</sub>) in the vertical column of the atmosphere (i.e. from Earth’s surface to the top of the atmosphere) and is measured in parts per million (ppm).--Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourth most abundant component of dry air (after nitrogen, oxygen and argon). CO<sub>2</sub> is an important greenhouse gas that helps trap heat in the atmosphere. As a part of the carbon cycle, CO<sub>2</sub> can be emitted (e.g. from respiration by plants and soils or from wildfires) or absorbed (e.g. from plant photosynthesis or by dissolving into the oceans). Human activities such as the combustion of fossil fuels and biomass burning are sources of CO<sub>2</sub>.--The Orbiting Carbon Observatory-2 (OCO-2) is a three-channel imaging grating spectrometer that collects cloud-free XCO<sub>2</sub> observations continuously over the globe by measuring reflected sunlight in the near-infrared. The OCO-2 Carbon Dioxide parameter is taken from the OCO-2 Level 2 Lite product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.--References: Crisp et al. The ACOS CO2 Retrieval Algorithm - Part 2: Global XCO2 data Characterization Atmos. Meas. Tech., 5, 687-707, 2012; [GES DISC - OCO-2 Documents](https://disc.gsfc.nasa.gov/information/documents?title=OCO-2%20Documents); [OCO-2 Data Collections](https://disc.gsfc.nasa.gov/datasets?project=OCO)diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.mdindex cab41e980..151df6d06 100644--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md@@ -4,4 +4,4 @@ Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourthThe Orbiting Carbon Observatory-2 (OCO-2) is a three-channel imaging grating spectrometer that collects cloud-free XCO<sub>2</sub> observations continuously over the globe by measuring reflected sunlight in the near-infrared. The OCO-2 Carbon Dioxide parameter is taken from the OCO-2 Level 2 Lite product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.-References: [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)+References: OCO2_L2_Lite_FP [doi:10.5067/E4E140XDMPO2](https://doi.org/10.5067/E4E140XDMPO2); [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.mdindex 0a85226b9..2b295ca1f 100644--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md@@ -4,4 +4,4 @@ Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourthThe Orbiting Carbon Observatory-2 (OCO-2) is a three-channel imaging grating spectrometer that collects cloud-free XCO<sub>2</sub> observations continuously over the globe by measuring reflected sunlight in the near-infrared. The OCO-2 Carbon Dioxide parameter is taken from the OCO-2 Level 2 Lite product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.-References: Crisp et al. The ACOS CO2 Retrieval Algorithm - Part 2: Global XCO2 data Characterization Atmos. Meas. Tech., 5, 687-707, 2012; [GES DISC - OCO-2 Documents](https://disc.gsfc.nasa.gov/information/documents?title=OCO-2%20Documents); [OCO-2 Data Collections](https://disc.gsfc.nasa.gov/datasets?project=OCO)+References: OCO2_L2_Lite_FP [doi:10.5067/E4E140XDMPO2](https://doi.org/10.5067/E4E140XDMPO2); Crisp et al. The ACOS CO2 Retrieval Algorithm - Part 2: Global XCO2 data Characterization Atmos. Meas. Tech., 5, 687-707, 2012; [GES DISC - OCO-2 Documents](https://disc.gsfc.nasa.gov/information/documents?title=OCO-2%20Documents); [OCO-2 Data Collections](https://disc.gsfc.nasa.gov/datasets?project=OCO)diff --git a/config/default/common/config/metadata/layers/oco3/CarbonDioxide.md b/config/default/common/config/metadata/layers/oco3/CarbonDioxide.mddeleted file mode 100644index 51bd31a9b..000000000--- a/config/default/common/config/metadata/layers/oco3/CarbonDioxide.md+++ /dev/null@@ -1,7 +0,0 @@-### Carbon Dioxide (Difference from Global Mean)-Temporal coverage: 17 December 2019 - present--### Carbon Dioxide (Total Column Average)-Temporal coverage: 17 December 2019 - present--References: [OCO3\_L2\_Lite\_FP: OCO-3 Level 2 bias-corrected XCO2 and other select fields from the full-physics retrieval aggregated as daily files, Retrospective processing VEarlyR](https://disc.gsfc.nasa.gov/datasets/OCO3_L2_Lite_FP_EarlyR/summary)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Global_Mean_Difference.md b/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Global_Mean_Difference.mdindex 6c6bb70c0..0474b3ce9 100644--- a/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Global_Mean_Difference.md+++ b/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Global_Mean_Difference.md@@ -1 +1,7 @@-References: [OCO3\_L2\_Lite\_FP: OCO-3 Level 2 bias-corrected XCO2 and other select fields from the full-physics retrieval aggregated as daily files, Retrospective processing VEarlyR](https://disc.gsfc.nasa.gov/datasets/OCO3_L2_Lite_FP_EarlyR/summary)\ No newline at end of file+The OCO-3 Carbon Dioxide (Difference from Global Mean) is a layer that combines OCO-3 XCO<sub>2</sub> (column-averaged dry-air mole fraction) and an estimated daily global trend XCO<sub>2</sub> value. This layer is created from the OCO-3 "Early" version which is an expedited version intended for provisional familiarizing with the instrument spectral and calibration properties.++Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourth most abundant component of dry air (after nitrogen, oxygen and argon). CO<sub>2</sub> is an important greenhouse gas that helps trap heat in the atmosphere. As a part of the carbon cycle, CO<sub>2</sub> can be emitted (e.g. from respiration by plants and soils or from wildfires) or absorbed (e.g. from plant photosynthesis or by dissolving into the oceans). Human activities such as the combustion of fossil fuels and biomass burning are sources of CO<sub>2</sub>.++The Orbiting Carbon Observatory-3 (OCO-3) was deployed to the International Space Station in May, 2019. It is technically a single instrument, almost identical to OCO-2. The Orbiting Carbon Observatory is the first NASA mission designed to collect space-based measurements of atmospheric carbon dioxide with the precision, resolution, and coverage needed to characterize the processes controlling its buildup in the atmosphere. OCO-3 incorporates three high-resolution spectrometers that make coincident measurements of reflected sunlight in the near-infrared CO2 near 1.61 and 2.06 micrometers and in molecular oxygen (O2) A-Band at 0.76 micrometers. The three spectrometers have different characteristics and are calibrated independently.++References: [OCO3_L2_Lite_FP](https://disc.gsfc.nasa.gov/datasets/OCO3_L2_Lite_FP_EarlyR/summary)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Total_Column_Average.md b/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Total_Column_Average.mdindex 6c6bb70c0..0b6102fca 100644--- a/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Total_Column_Average.md+++ b/config/default/common/config/metadata/layers/oco3/OCO-3_Carbon_Dioxide_Total_Column_Average.md@@ -1 +1,7 @@-References: [OCO3\_L2\_Lite\_FP: OCO-3 Level 2 bias-corrected XCO2 and other select fields from the full-physics retrieval aggregated as daily files, Retrospective processing VEarlyR](https://disc.gsfc.nasa.gov/datasets/OCO3_L2_Lite_FP_EarlyR/summary)\ No newline at end of file+The OCO-3 Carbon Dioxide (Total Column Average) layer displays the column-averaged dry-air mole fraction of carbon dioxide (XCO<sub>2</sub>) in the vertical column of the atmosphere (i.e. from Earth’s surface to the top of the atmosphere) and is measured in parts per million (ppm). This layer is created from the OCO-3 "Early" version which is an expedited version intended for provisional familiarizing with the instrument spectral and calibration properties.++Carbon dioxide (CO<sub>2</sub>) is an odorless, colorless gas and is the fourth most abundant component of dry air (after nitrogen, oxygen and argon). CO<sub>2</sub> is an important greenhouse gas that helps trap heat in the atmosphere. As a part of the carbon cycle, CO<sub>2</sub> can be emitted (e.g. from respiration by plants and soils or from wildfires) or absorbed (e.g. from plant photosynthesis or by dissolving into the oceans). Human activities such as the combustion of fossil fuels and biomass burning are sources of CO<sub>2</sub>.++The Orbiting Carbon Observatory-3 (OCO-3) was deployed to the International Space Station in May, 2019. It is technically a single instrument, almost identical to OCO-2. The Orbiting Carbon Observatory is the first NASA mission designed to collect space-based measurements of atmospheric carbon dioxide with the precision, resolution, and coverage needed to characterize the processes controlling its buildup in the atmosphere. OCO-3 incorporates three high-resolution spectrometers that make coincident measurements of reflected sunlight in the near-infrared CO2 near 1.61 and 2.06 micrometers and in molecular oxygen (O2) A-Band at 0.76 micrometers. The three spectrometers have different characteristics and are calibrated independently.++References: [OCO3_L2_Lite_FP](https://disc.gsfc.nasa.gov/datasets/OCO3_L2_Lite_FP_EarlyR/summary)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F10.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F10.mddeleted file mode 100644index e5f01b6c8..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F10.md+++ /dev/null@@ -1,11 +0,0 @@-### DMSP-F10 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 8 December 1990 - 14 November 1997--The DMSP-F10 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F10 spacecraft using a unified, physically based algorithm to retrieve cloud liquid water measurements.--The F10 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 790 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.--References: [RSS SSM/I Ocean Product Grids Daily from DMSP F10 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F10/SSMI/DATA301);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F10](https://www.wmo-sat.info/oscar/satellites/view/57);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013.](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F11.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F11.mddeleted file mode 100644index 09817e7d6..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F11.md+++ /dev/null@@ -1,11 +0,0 @@-### DMSP-F11 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 3 December 1991 - 16 May 2000--The DMSP-F11 SMMI Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F11 spacecraft using a unified, physically based algorithm to retrieve cloud liquid water measurements.--The F11 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 853 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz--References: [RSS SSM/I Ocean Product Grids Daily from DMSP F11 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F11/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F11](https://www.wmo-sat.info/oscar/satellites/view/58);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F13.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F13.mddeleted file mode 100644index 150008d5e..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F13.md+++ /dev/null@@ -1,10 +0,0 @@-### DMSP-F13 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 3 May 1995 - 4 November 2009--The DMSP-F13 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F13 spacecraft using a unified, physically based algorithm to retrieve cloud liquid water measurements.--The F13 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.--References: [RSS SSM/I Ocean Product Grids Daily from DMSP F13 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F13/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F13](https://www.wmo-sat.info/oscar/satellites/view/60); [SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F14.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F14.mddeleted file mode 100644index c0fec1f7d..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F14.md+++ /dev/null@@ -1,12 +0,0 @@-### DMSP-F14 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 8 May 1997 - 8 August 2008--The DMSP-F14 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F14 spacecraft using a unified, physically based algorithm to retrieve cloud liquid water measurements.--The F14 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 852 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.--References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F14 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F14/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F14](https://www.wmo-sat.info/oscar/satellites/view/61);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F15.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F15.mddeleted file mode 100644index 3ad85ca38..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F15.md+++ /dev/null@@ -1,12 +0,0 @@-### DMSP-F15 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 18 December 1999 - 31 December 2011--The DMSP-F15 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F15 spacecraft using a unified, physically based algorithm to retrieve cloud liquid measurements.--The F15 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.--References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F15 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F15/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F15](https://www.wmo-sat.info/oscar/satellites/view/62);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F16.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F16.mddeleted file mode 100644index 605757b22..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F16.md+++ /dev/null@@ -1,14 +0,0 @@-### DMSP-F16 SSMIS Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 26 October 2003 - present--The DMSP-F16 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave Imager Sounder (SSMIS) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F16 spacecraft using a unified, physically based algorithm that was carefully intercalibrated on the brightness temperature level with the previous SSM/I data to retrieve cloud liquid measurements.--The F16 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.--References:-[RSS SSMIS Ocean Product Grids Daily from DMSP F16 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F16/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F16](https://www.wmo-sat.info/oscar/satellites/view/63);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F17.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F17.mddeleted file mode 100644index 3141e5dac..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F17.md+++ /dev/null@@ -1,13 +0,0 @@-### DMSP-F17 SSMIS Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 14 December 2006 - present--The DMSP-F17 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local PM and descending, local AM. This layer was constructed by the Special Sensor Microwave Imager Sounder (SSMIS) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F17 spacecraft using a unified, physically based algorithm that was carefully intercalibrated on the brightness temperature level with the previous SSM/I data to retrieve cloud liquid measurements.--The F17 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.--References: [RSS SSMIS Ocean Product Grids Daily from DMSP F17 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F17/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F17](https://www.wmo-sat.info/oscar/satellites/view/64);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)diff --git a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F8.md b/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F8.mddeleted file mode 100644index 59faf6ec0..000000000--- a/config/default/common/config/metadata/layers/ssmi/CloudLiquidWaterOverOceansDMSP-F8.md+++ /dev/null@@ -1,11 +0,0 @@-### DMSP-F8 SSMI Cloud Liquid Water Over Oceans (Ascending/Descending)-Temporal Coverage: 9 July 1987 - 31 December 1991--The DMSP-F8 Cloud Liquid Water Over Oceans layer indicates the amount of cloud liquid water in kilograms per meters squared (kg/m<sup>2</sup>) over oceans. The imagery resolution is about 0.25 degrees, or about 28 kilometers, and the temporal resolution is daily. This is available in two layers, ascending, local AM and descending, local PM. This layer was constructed by the Special Sensor Microwave/Imager (SSM/I) sensor that flew on the Defense Meteorological Satellite Program (DMSP) F08 spacecraft using a unified, physically based algorithm to retrieve cloud liquid water measurements.--The F08 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 860 ± 25 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.--References: [RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F8 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F8/SSMI/DATA302);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems](http://images.remss.com/papers/ssmi.pdf);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex 912f507f3..972b6b86b 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,7 +2,4 @@ The DMSP-F10 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F10 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 790 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F10 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F10/SSMI/DATA301);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F10](https://www.wmo-sat.info/oscar/satellites/view/57);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013.](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf)+References: rssmif10d [doi:10.5067/MEASURES/DMSP-F10/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F10/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 912f507f3..972b6b86b 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,7 +2,4 @@ The DMSP-F10 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F10 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 790 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F10 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F10/SSMI/DATA301);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F10](https://www.wmo-sat.info/oscar/satellites/view/57);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013.](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf)+References: rssmif10d [doi:10.5067/MEASURES/DMSP-F10/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F10/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex 758849f53..25ccb1f04 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,7 +2,4 @@ The DMSP-F11 SMMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F11 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 853 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F11 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F11/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F11](https://www.wmo-sat.info/oscar/satellites/view/58);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif11d [doi:10.5067/MEASURES/DMSP-F11/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F11/SSMI/DATA301)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 758849f53..25ccb1f04 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,7 +2,4 @@ The DMSP-F11 SMMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F11 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 853 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F11 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F11/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F11](https://www.wmo-sat.info/oscar/satellites/view/58);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif11d [doi:10.5067/MEASURES/DMSP-F11/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F11/SSMI/DATA301)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex 8eb043c40..4b4fdda4d 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,6 +2,4 @@ The DMSP-F13 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F13 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F13 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F13/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F13](https://www.wmo-sat.info/oscar/satellites/view/60); [SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif13d [doi:10.5067/MEASURES/DMSP-F13/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F13/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 8eb043c40..1465147cf 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,6 +2,4 @@ The DMSP-F13 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F13 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids Daily from DMSP F13 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F13/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F13](https://www.wmo-sat.info/oscar/satellites/view/60); [SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif13d [doi:10.5067/MEASURES/DMSP-F13/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F13/SSMI/DATA301)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex d156289a0..5ea8b5d31 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,8 +2,4 @@ The DMSP-F14 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F14 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 852 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F14 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F14/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F14](https://www.wmo-sat.info/oscar/satellites/view/61);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif14d [doi:10.5067/MEASURES/DMSP-F14/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F14/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 5fd994d99..de59aa015 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,8 +2,4 @@ The DMSP-F14 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F14 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 852 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F14 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F14/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F14](https://www.wmo-sat.info/oscar/satellites/view/61);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif14d [doi:10.5067/MEASURES/DMSP-F14/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F14/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex 64e981487..e9f6dfd29 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,8 +2,4 @@ The DMSP-F15 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F15 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F15 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F15/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F15](https://www.wmo-sat.info/oscar/satellites/view/62);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif15d [doi:10.5067/MEASURES/DMSP-F15/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F15/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 64e981487..e9f6dfd29 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,8 +2,4 @@ The DMSP-F15 SSMI Cloud Liquid Water Over Oceans layer indicates the amount of cThe F15 spacecraft is flown by the DMSP on the two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References:-[RSS SSM/I Ocean Product Grids Daily from DMSP F15 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F15/SSMI/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F15](https://www.wmo-sat.info/oscar/satellites/view/62);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/ssmi.pdf)+References: rssmif15d [doi:10.5067/MEASURES/DMSP-F15/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F15/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex eaf8eccda..4c86774e4 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,10 +2,4 @@ The DMSP-F16 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount ofThe F16 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.-References:-[RSS SSMIS Ocean Product Grids Daily from DMSP F16 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F16/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F16](https://www.wmo-sat.info/oscar/satellites/view/63);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif16d [doi:10.5067/MEASURES/DMSP-F16/SSMIS/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F16/SSMIS/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex eaf8eccda..f625b843e 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,10 +2,5 @@ The DMSP-F16 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount ofThe F16 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.-References:-[RSS SSMIS Ocean Product Grids Daily from DMSP F16 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F16/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F16](https://www.wmo-sat.info/oscar/satellites/view/63);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif16d [doi:10.5067/MEASURES/DMSP-F16/SSMIS/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F16/SSMIS/DATA301)+diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex 8c1d8c9ec..46b610e07 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,9 +2,4 @@ The DMSP-F17 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount ofThe F17 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.-References: [RSS SSMIS Ocean Product Grids Daily from DMSP F17 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F17/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F17](https://www.wmo-sat.info/oscar/satellites/view/64);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif17d [doi:10.5067/MEASURES/DMSP-F17/SSMIS/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F17/SSMIS/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex 8c1d8c9ec..51e90873e 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,9 +2,4 @@ The DMSP-F17 SSMIS Cloud Liquid Water Over Oceans layer indicates the amount ofThe F17 spacecraft is flown by the DMSP and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 850 kilometers. The SSMIS sensor collects data forward of nadir at 21 frequencies and 24 channel microwave radiometers ranging from 54 to 183 gigahertz bands, as well as collected microwave energy measurements from the surface and the atmosphere of the Earth with a rotating 24-inch parabolic reflector.-References: [RSS SSMIS Ocean Product Grids Daily from DMSP F17 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F17/SSMIS/DATA301);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Satellite: DMSP-F17](https://www.wmo-sat.info/oscar/satellites/view/64);-[WMO Observing System Capability Analysis and Review Tool (OSCAR) - Instrument: SSMIS](https://www.wmo-sat.info/oscar/instruments/view/536);-[NSIDC: Special Sensor Microwave Imager/Sounder (SSMIS)](https://nsidc.org/data/docs/daac/ssmis_instrument/);-[Algorithm and Data User Manual (ADUM) for the Special Sensor Microwave Imager/Sounder (SSMIS) Technical Report, 2002](http://rain.atmos.colostate.edu/FCDR/ssmis.html);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif17d [doi:10.5067/MEASURES/DMSP-F17/SSMIS/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F17/SSMIS/DATA301)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Ascending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Ascending.mdindex e84038771..c1bf78567 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Ascending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Ascending.md@@ -2,7 +2,4 @@ The DMSP-F8 Cloud Liquid Water Over Oceans layer indicates the amount of cloud lThe F08 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 860 ± 25 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F8 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F8/SSMI/DATA302);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems](http://images.remss.com/papers/ssmi.pdf);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif08d [doi:10.5067/MEASURES/DMSP-F8/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F8/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Descending.md b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Descending.mdindex e84038771..c1bf78567 100644--- a/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Descending.md+++ b/config/default/common/config/metadata/layers/ssmi/SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Descending.md@@ -2,7 +2,4 @@ The DMSP-F8 Cloud Liquid Water Over Oceans layer indicates the amount of cloud lThe F08 spacecraft is flown by the DMSP on two operational polar orbiting platforms and had an orbit that was near-circular, sun-synchronous, and near-polar with an altitude of about 860 ± 25 kilometers. The SSM/I sensor consisted of 7 separate total-power radiometers measuring the intensity of radiation coming from its Earth-viewing reflector operating at four different frequencies: 19.35, 22.235, 37, and 85.5 gigahertz.-References: [RSS SSM/I Ocean Product Grids 3-Day Average from DMSP F8 NetCDF](https://doi.org/10.5067/MEASURES/DMSP-F8/SSMI/DATA302);-[Wentz. F., A Well Calibrated Ocean Algorithm for SSM/I, Remote Sensing Systems](http://images.remss.com/papers/ssmi.pdf);-[Wentz, F., SSM/I Version-7 Calibration Report, Remote Sensing Systems, 2013](http://images.remss.com/papers/tech_reports/2012_Wentz_011012_Version-7_SSMI_Calibration.pdf);-[SSM/I and SSMIS Data in NetCDF User's Guide, Global Hydrology Research Center, The University of Alabama in Huntsville, 2012.](https://ghrc.nsstc.nasa.gov/pub/doc/ssmi_netcdf/SSMI_Data_in_NetCDF.docx)+References: rssmif08d [doi:10.5067/MEASURES/DMSP-F8/SSMI/DATA301](https://doi.org/10.5067/MEASURES/DMSP-F8/SSMI/DATA301)diff --git a/config/default/common/config/metadata/layers/viirs/Chlorophyll_a.md b/config/default/common/config/metadata/layers/viirs/Chlorophyll_a.mdindex 08cd9f106..f446ce0a4 100644--- a/config/default/common/config/metadata/layers/viirs/Chlorophyll_a.md+++ b/config/default/common/config/metadata/layers/viirs/Chlorophyll_a.md@@ -1,8 +1,4 @@-### Chlorophyll *a* (L2)-Temporal coverage: 1 April - 3 April 2020; 13 May - 20 May 2020, 6 June 2020 - present--The VIIRS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.--The VIIRS Chlorophyll *a* product is available from the joint NASA/NOAA Suomi National Polar orbiting Partnership (Suomi NPP) satellite. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.+### About Chlorophyll *a*+Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.References: [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)diff --git a/config/default/common/config/metadata/layers/viirs/CirrusReflectance.md b/config/default/common/config/metadata/layers/viirs/CirrusReflectance.mddeleted file mode 100644index d4d8bbd6f..000000000--- a/config/default/common/config/metadata/layers/viirs/CirrusReflectance.md+++ /dev/null@@ -1,25 +0,0 @@-### Cirrus Reflectance (Visible & NIR)-Temporal coverage: 1 March 2012 – present--The VIIRS Cirrus Reflectance (Visible & NIR) layer is a quantitative measure of the portion of reflected and scattered solar light in the visible and near-IR spectral region by the upper level cirrus clouds. This product is directly usable for removing cirrus effects in VIIRS images for all bands below 1 micron (M1 – M7). This product can also be useful for climate related research, such as the study of aircraft contrails and contrail-induced cirrus clouds. This product is a continuation to the multi-year NASA EOS Terra and Aqua MODIS cirrus reflectance data products with significant improvements. The improvements are made possible because of more sensitive detectors and better instrumentation for VIIRS in comparison with the previous generation of MODIS instruments.--The VIIRS Cirrus Reflectance (Visible & NIR) layer is available from the joint NASA/NOAA Suomi National Polar orbiting Partnership (Suomi NPP) satellite (CLDCR_L2_VIIRS_SNPP) for the daytime overpass. The sensor/algorithm resolution is 750 m at nadir, imagery resolution is 750 m at nadir, and the temporal resolution is daily. Resolution is coarser toward both the left and the right edges of an imaging swath.--### Cirrus Reflectance (SWIR, Band M11)-Temporal coverage: 1 March 2012 – present--The VIIRS Cirrus Reflectance (SWIR, Band M11) layer is a quantitative measure of the portion of reflected and scattered solar light over the VIIRS M11 bandpass by the upper level cirrus clouds. This product is directly usable for removing cirrus effects in VIIRS images of M11 band, a SWIR band centered near 2.25 micron. In general, because ice particles within cirrus clouds have absorption effects near 2.25 micron, the M11 Band Cirrus Reflectance is smaller than the corresponding Visible & NIR Cirrus Reflectance.--The VIIRS Cirrus Reflectance (SWIR, Band M11) layer is available from the joint NASA/NOAA Suomi National Polar orbiting Partnership (Suomi NPP) satellite (CLDCR_L2_VIIRS_SNPP) for the daytime overpass. The sensor/algorithm resolution is 750 m at nadir, imagery resolution is 750 m at nadir, and the temporal resolution is daily. Resolution is coarser toward both the left and the right edges of an imaging swath.--### Apparent Reflectance (VNP02MOD, Band M09)-Temporal coverage: 1 March 2012 – present--The VIIRS Apparent Reflectance (VNP02MOD, Band M09) layer is a direct measure of the portion of reflected and scattered solar light over the VIIRS M09 bandpass by the upper level cirrus clouds. The M09 band is located within a strong atmospheric water band absorption. The mechanism for cirrus detections with this band is as following. In the absence of cirrus clouds, this band receives little scattered solar radiation by the surface and the low-level water clouds because of the total absorption of solar radiation by atmospheric water vapor located above them. When the upper-level cirrus clouds are present, however, this band receives solar radiation by the cirrus clouds that contrasts well on the nearly black background. Cirrus-detecting bands, similar to VIIRS M09 and MODIS Band 26, have been implemented in many other satellite instruments, including the US Landsat-8 Operational Land Imager (OLI) and the European Sentinel-2 Multi-Spetral Imager (MSI). Because the M09 Band subjects to absorption by water vapor molecules located above and within cirrus clouds, the image of M09 Band is usable for cirrus detections, but not directly usable for the quantitative removal of cirrus effects in other VIIRS bands.--The Apparent Reflectance (VNP02MOD, Band M09) layer is available from the joint NASA/NOAA Suomi National Polar orbiting Partnership (Suomi NPP) satellite (CLDCR_L2_VIIRS_SNPP) for the daytime overpass. The sensor resolution is 750 m at nadir, imagery resolution is 750 m at nadir, and the temporal resolution is daily. Resolution is coarser toward both the left and the right edges of an imaging swath.--Consult the [NASA VIIRS Suomi-NPP Level-2 Cirrus Reflectance Product User Guide](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/viirs/VIIRS_Cirrus_Refl_User_Guide_Oct_2020.pdf) for additional information.--References: [Dataset doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)-diff --git a/config/default/common/config/metadata/layers/viirs/ClearSkyConfidence.md b/config/default/common/config/metadata/layers/viirs/ClearSkyConfidence.mddeleted file mode 100644index 9e130d963..000000000--- a/config/default/common/config/metadata/layers/viirs/ClearSkyConfidence.md+++ /dev/null@@ -1,14 +0,0 @@-### Clear Sky Confidence (Day | Night) - Suomi NPP-Temporal coverage: 1 March 2012 - Present--The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_SNPP/).--References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_SNPP\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)--### Clear Sky Confidence (Day | Night) - NOAA-20-Temporal coverage: 17 February 2018 - Present--The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_NOAA20/).---References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_NOAA20\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_NOAA20_NRT.001)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/viirs/CloudEffectiveRadius.md b/config/default/common/config/metadata/layers/viirs/CloudEffectiveRadius.mddeleted file mode 100644index 041a3a1ec..000000000--- a/config/default/common/config/metadata/layers/viirs/CloudEffectiveRadius.md+++ /dev/null@@ -1,8 +0,0 @@-### Cloud Effective Radius-Temporal coverage: 1 March 2012 - Present--The VIIRS Cloud Effective Radius layer is a measure of cloud particle size in microns (μm). It is retrieved globally during day time for liquid and ice phases. Generally, smaller the particle size, brighter and more reflective are the clouds. The smaller cloud particles tend to reflect and scatter more sunlight back into space.--The VIIRS Cloud Effective Radius layer is available from the joint NASA/NOAA Suomi NPP satellite for daytime overpasses. The sensor/algorithm resolution is 750 m, imagery resolution is 1 km, and the temporal resolution is daily.--References: [doi: 10.5067/VIIRS/CLDPROP\_L2\_VIIRS\_SNPP\.011](https://doi.org/10.5067/VIIRS/CLDPROP_L2_VIIRS_SNPP.011)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Day.md b/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Day.mdindex e8d59792a..f481fe97f 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Day.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Day.md@@ -1,4 +1,3 @@The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_NOAA20/).--References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_NOAA20\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_NOAA20_NRT.001)\ No newline at end of file+References: CLDMSK_L2_VIIRS_SNPP_NRT.001 [doi:10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Night.md b/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Night.mdindex e8d59792a..f481fe97f 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Night.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_NOAA20_Clear_Sky_Confidence_Night.md@@ -1,4 +1,3 @@The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_NOAA20/).--References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_NOAA20\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_NOAA20_NRT.001)\ No newline at end of file+References: CLDMSK_L2_VIIRS_SNPP_NRT.001 [doi:10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Apparent_Reflectance_VNP02MOD_M09.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Apparent_Reflectance_VNP02MOD_M09.mdindex 02aea813d..b97294777 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Apparent_Reflectance_VNP02MOD_M09.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Apparent_Reflectance_VNP02MOD_M09.md@@ -4,7 +4,7 @@ The Apparent Reflectance (VNP02MOD, Band M09) layer is available from the jointConsult the [NASA VIIRS Suomi-NPP Level-2 Cirrus Reflectance Product User Guide](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/viirs/VIIRS_Cirrus_Refl_User_Guide_Oct_2020.pdf) for additional information.-References: [Dataset doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)+References: CLDCR_L2_VIIRS_SNPP.001 [doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_SWIR_M11.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_SWIR_M11.mdindex ca3ce9a8c..26d40b8c9 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_SWIR_M11.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_SWIR_M11.md@@ -4,5 +4,6 @@ The VIIRS Cirrus Reflectance (SWIR, Band M11) layer is available from the jointConsult the [NASA VIIRS Suomi-NPP Level-2 Cirrus Reflectance Product User Guide](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/viirs/VIIRS_Cirrus_Refl_User_Guide_Oct_2020.pdf) for additional information.-References: [Dataset doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)+References: CLDCR_L2_VIIRS_SNPP.001 [doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)+diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_VIS_NIR.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_VIS_NIR.mdindex b13d8c476..174c2aa2a 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_VIS_NIR.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cirrus_Reflectance_VIS_NIR.md@@ -4,5 +4,5 @@ The VIIRS Cirrus Reflectance (Visible & NIR) layer is available from the joint NConsult the [NASA VIIRS Suomi-NPP Level-2 Cirrus Reflectance Product User Guide](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/viirs/VIIRS_Cirrus_Refl_User_Guide_Oct_2020.pdf) for additional information.-References: [Dataset doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)+References: CLDCR_L2_VIIRS_SNPP.001 [doi:10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001](https://doi.org/10.5067/VIIRS/CLDCR_L2_VIIRS_SNPP.001)diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Day.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Day.mdindex 4cfa4bb76..7086c98b9 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Day.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Day.md@@ -1,4 +1,4 @@The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_SNPP/).-References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_SNPP\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)+References: CLDMSK_L2_VIIRS_SNPP_NRT.001 [doi:10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Night.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Night.mdindex 06a8b9850..ca65ecdf9 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Night.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Clear_Sky_Confidence_Night.md@@ -1,3 +1,4 @@The Clear Sky Confidence product is the output of a cloud mask designed to work on multiple imaging sensors. Data values range from 0->1 and represent a confidence that clear skies were observed. A value of 1.0 means very high confidence of clear sky. A value of 0.0 means very low confidence of clear sky, or very high confidence that cloudy skies were observed. Confidences <= 0.95 are considered to be cloudy or partially cloudy; hence, when viewing this product we would recommend setting the threshold from 0 -> 0.95. By doing that and having the base layer set as the Corrected Reflectance one can see how effective the product is at masking out clouds. Find out more about the [cloud mask product](https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/products/CLDMSK_L2_VIIRS_SNPP/).-References: [doi: 10.5067/VIIRS/CLDMSK\_L2\_VIIRS\_SNPP\_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)+References: CLDMSK_L2_VIIRS_SNPP_NRT.001 [doi:10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001](https://doi.org/10.5067/VIIRS/CLDMSK_L2_VIIRS_SNPP_NRT.001)+diff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cloud_Effective_Radius.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cloud_Effective_Radius.mdindex fb531107a..001fd8918 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cloud_Effective_Radius.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_Cloud_Effective_Radius.md@@ -2,4 +2,4 @@ The VIIRS Cloud Effective Radius layer is a measure of cloud particle size in miThe VIIRS Cloud Effective Radius layer is available from the joint NASA/NOAA Suomi NPP satellite for daytime overpasses. The sensor/algorithm resolution is 750 m, imagery resolution is 1 km, and the temporal resolution is daily.-References: [doi: 10.5067/VIIRS/CLDPROP\_L2\_VIIRS\_SNPP\.011](https://doi.org/10.5067/VIIRS/CLDPROP_L2_VIIRS_SNPP.011)\ No newline at end of file+References: CLDPROP_L2_VIIRS_SNPP.011 [doi:10.5067/VIIRS/CLDPROP_L2_VIIRS_SNPP.011](https://doi.org/10.5067/VIIRS/CLDPROP_L2_VIIRS_SNPP.011)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_L2_Chlorophyll_A.md b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_L2_Chlorophyll_A.mdindex e40d669a3..57b8267e0 100644--- a/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_L2_Chlorophyll_A.md+++ b/config/default/common/config/metadata/layers/viirs/VIIRS_SNPP_L2_Chlorophyll_A.md@@ -1,5 +1,5 @@-The VIIRS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean. Chlorophyll is a light harvesting pigment found in most photosynthetic organisms. In the ocean, phytoplankton all contain the chlorophyll pigment, which has a greenish color. Derived from the Greek words _phyto_ (plant) and _plankton_ (made to wander or drift), _phytoplankton_ are microscopic organisms that live in watery environments, both salty and fresh. Some phytoplankton are bacteria, some are protists, and most are single-celled plants.The concentration of chlorophyll a is used as an index of phytoplankton biomass. Phytoplankton fix carbon through photosynthesis, taking in dissolved carbon dioxide in the sea water and producing oxygen, enabling phytoplankton to grow. Changes in the amount of phytoplankton indicate the change in productivity of the ocean and as marine phytoplankton capture almost an equal amount of carbon as does photosynthesis by land vegetation, it provides an ocean link to global climate change modeling. The Chlorophyll *a* product is therefore a useful product for assessing the “health” of the ocean. The presence of phytoplankton indicates sufficient nutrient conditions for phytoplankton to flourish, but harmful algal blooms (HABs) can result when high concentrations of phytoplankton produced toxins build up. Known as red tides, blue-green algae or cyanobacteria, harmful algal blooms have severe impacts on human health, aquatic ecosystems and the economy. Chlorophyll features can also be used to trace oceanographic currents, atmospheric jets/streams and upwelling/downwelling/river plumes. Chlorophyll concentration is also useful for studying the Earth’s climate system as it is plays an integral role in the Global Carbon Cycle. More phytoplankton in the ocean may result in a higher capture rate of carbon dioxide into the ocean and help cool the planet.+The VIIRS Chlorophyll *a* layer provides the near-surface concentration of chlorophyll *a* in milligrams of chlorophyll pigment per cubic meter (mg/m<sup>3</sup>) in the ocean.The VIIRS Chlorophyll *a* product is available from the joint NASA/NOAA Suomi National Polar orbiting Partnership (Suomi NPP) satellite. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-References: [OceanColor Web - Level 1&2 Browsers](https://oceancolor.gsfc.nasa.gov/cgi/browse.pl?sen=am); [OceanColor Web - Chlorophyll a](https://oceancolor.gsfc.nasa.gov/atbd/chlor_a/); [NASA Earth Observations - Chlorophyll Concentration](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MY1DMM_CHLORA)+References: VIIRSN_L2_OC [doi:10.5067/NPP/VIIRS/L2/OC/2018](https://doi.org/10.5067/NPP/VIIRS/L2/OC/2018)\ No newline at end of filediff --git a/config/default/common/config/wv.json/measurements/Carbon Dioxide.json b/config/default/common/config/wv.json/measurements/Carbon Dioxide.jsonindex 90a7cfdd0..a5d86dfd1 100644--- a/config/default/common/config/wv.json/measurements/Carbon Dioxide.json+++ b/config/default/common/config/wv.json/measurements/Carbon Dioxide.json@@ -26,8 +26,8 @@"OCO-2": {"id": "oco-2","title": "OCO-2",- "description": "oco2/CarbonDioxide",- "image": "oco2/CarbonDioxide",+ "description": "",+ "image": "","settings": ["OCO-2_Carbon_Dioxide_Global_Mean_Difference","OCO-2_Carbon_Dioxide_Total_Column_Average",@@ -37,11 +37,13 @@"OCO-3": {"id": "oco-3","title": "OCO-3",- "description": "oco3/CarbonDioxide",- "image": "oco3/CarbonDioxide",+ "description": "",+ "image": "","settings": ["OCO-3_Carbon_Dioxide_Global_Mean_Difference",- "OCO-3_Carbon_Dioxide_Total_Column_Average"+ "OCO-3_Carbon_Dioxide_Total_Column_Average",+ "OrbitTracks_ISS_Ascending",+ "OrbitTracks_ISS_Descending"]}}diff --git a/config/default/common/config/wv.json/measurements/Carbon Monoxide.json b/config/default/common/config/wv.json/measurements/Carbon Monoxide.jsonindex ca3e58bb3..5cc6ed24e 100644--- a/config/default/common/config/wv.json/measurements/Carbon Monoxide.json+++ b/config/default/common/config/wv.json/measurements/Carbon Monoxide.json@@ -24,7 +24,7 @@"Aura/MLS": {"id": "aura-mls","title": "Aura/MLS",- "description": "mls/CO",+ "description": "mls/CarbonMonoxide","image": "","settings": ["MLS_CO_215hPa_Day",@@ -54,7 +54,7 @@"MERRA-2": {"id": "merra2","title": "MERRA-2",- "description": "merra/CarbonMonoxide",+ "description": "","image": "","settings": ["MERRA2_Carbon_Monoxide_Emission_Monthly"diff --git a/config/default/common/config/wv.json/measurements/Cirrus Reflectance.json b/config/default/common/config/wv.json/measurements/Cirrus Reflectance.jsonindex b0b8ad6f1..5733fa176 100644--- a/config/default/common/config/wv.json/measurements/Cirrus Reflectance.json+++ b/config/default/common/config/wv.json/measurements/Cirrus Reflectance.json@@ -8,7 +8,7 @@"Suomi NPP/VIIRS": {"id": "suomi-npp-viirs","title": "Suomi NPP/VIIRS",- "description": "viirs/CirrusReflectance",+ "description": "","image": "","settings": ["VIIRS_SNPP_Cirrus_Reflectance_VIS_NIR",diff --git a/config/default/common/config/wv.json/measurements/Clear Sky Confidence.json b/config/default/common/config/wv.json/measurements/Clear Sky Confidence.jsonindex 36b0067cd..3e804488d 100644--- a/config/default/common/config/wv.json/measurements/Clear Sky Confidence.json+++ b/config/default/common/config/wv.json/measurements/Clear Sky Confidence.json@@ -8,7 +8,7 @@"NOAA-20/VIIRS": {"id": "noaa-20-viirs","title": "NOAA-20/VIIRS",- "description": "viirs/ClearSkyConfidence",+ "description": "","image": "","settings": ["VIIRS_NOAA20_Clear_Sky_Confidence_Day",@@ -20,7 +20,7 @@"Suomi NPP/VIIRS": {"id": "suomi-npp-viirs","title": "Suomi NPP/VIIRS",- "description": "viirs/ClearSkyConfidence",+ "description": "","image": "","settings": ["VIIRS_SNPP_Clear_Sky_Confidence_Day",diff --git a/config/default/common/config/wv.json/measurements/Cloud Albedo.json b/config/default/common/config/wv.json/measurements/Cloud Albedo.jsonindex f5cab5fec..814d079f9 100644--- a/config/default/common/config/wv.json/measurements/Cloud Albedo.json+++ b/config/default/common/config/wv.json/measurements/Cloud Albedo.json@@ -8,7 +8,7 @@"MERRA-2": {"id": "merra2","title": "MERRA-2",- "description": "merra/CloudAlbedo",+ "description": "","image": "","settings": ["MERRA2_ISCCP_Cloud_Albedo_Monthly"diff --git a/config/default/common/config/wv.json/measurements/Cloud Effective Radius.json b/config/default/common/config/wv.json/measurements/Cloud Effective Radius.jsonindex 7bf0e6b9e..61a7dc90e 100644--- a/config/default/common/config/wv.json/measurements/Cloud Effective Radius.json+++ b/config/default/common/config/wv.json/measurements/Cloud Effective Radius.json@@ -8,7 +8,7 @@"Aqua/MODIS": {"id": "aqua-modis","title": "Aqua/MODIS",- "description": "modis/CloudEffectiveRadius",+ "description": "","image": "","settings": ["MODIS_Aqua_Cloud_Effective_Radius",@@ -16,8 +16,8 @@"MODIS_Aqua_Cloud_Effective_Radius_37","MODIS_Aqua_Cloud_Effective_Radius_37_PCL","MODIS_Aqua_Cloud_Effective_Radius_16",- "MODIS_Aqua_Cloud_Effective_Radius_1621","MODIS_Aqua_Cloud_Effective_Radius_16_PCL",+ "MODIS_Aqua_Cloud_Effective_Radius_1621","MODIS_Aqua_Cloud_Effective_Radius_PCL_1621","OrbitTracks_Aqua_Ascending"]@@ -25,7 +25,7 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/CloudEffectiveRadius",+ "description": "modis/terra/CloudEffectiveRadius","image": "","settings": ["MODIS_Terra_Cloud_Effective_Radius",@@ -33,8 +33,8 @@"MODIS_Terra_Cloud_Effective_Radius_37","MODIS_Terra_Cloud_Effective_Radius_37_PCL","MODIS_Terra_Cloud_Effective_Radius_16",- "MODIS_Terra_Cloud_Effective_Radius_1621","MODIS_Terra_Cloud_Effective_Radius_16_PCL",+ "MODIS_Terra_Cloud_Effective_Radius_1621","MODIS_Terra_Cloud_Effective_Radius_PCL_1621","OrbitTracks_Terra_Descending"]@@ -42,7 +42,7 @@"Suomi NPP/VIIRS": {"id": "suomi-npp-viirs","title": "Suomi NPP/VIIRS",- "description": "viirs/CloudEffectiveRadius",+ "description": "","image": "","settings": ["VIIRS_SNPP_Cloud_Effective_Radius",diff --git a/config/default/common/config/wv.json/measurements/Cloud Fraction.json b/config/default/common/config/wv.json/measurements/Cloud Fraction.jsonindex 86c237f9b..c3e09e12f 100644--- a/config/default/common/config/wv.json/measurements/Cloud Fraction.json+++ b/config/default/common/config/wv.json/measurements/Cloud Fraction.json@@ -20,7 +20,7 @@"Aqua/MODIS": {"id": "aqua-modis","title": "Aqua/MODIS",- "description": "modis/CloudFraction",+ "description": "","image": "","settings": ["MODIS_Aqua_Cloud_Fraction_Day",@@ -32,13 +32,14 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/CloudFraction",+ "description": "","image": "","settings": ["MODIS_Terra_Cloud_Fraction_Day","MODIS_Terra_Cloud_Fraction_Night",- "OrbitTracks_Terra_Ascending",- "OrbitTracks_Terra_Descending"+ "OrbitTracks_Terra_Descending",+ "OrbitTracks_Terra_Ascending"+]}diff --git a/config/default/common/config/wv.json/measurements/Cloud Liquid Water.json b/config/default/common/config/wv.json/measurements/Cloud Liquid Water.jsonindex eb660f411..dade17fba 100644--- a/config/default/common/config/wv.json/measurements/Cloud Liquid Water.json+++ b/config/default/common/config/wv.json/measurements/Cloud Liquid Water.json@@ -8,7 +8,7 @@"GCOM-W1/AMSR2": {"id": "gcom-w1-amsr2","title": "GCOM-W1/AMSR2",- "description": "amsr2/CloudLiquidWater",+ "description": "","image": "","settings": ["AMSRU2_Cloud_Liquid_Water_Day",@@ -20,7 +20,7 @@"DMSP-F08/SSMI": {"id": "dmsp-f08-ssmi","title": "DMSP-F08/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F8",+ "description": "","image": "","settings": ["SSMI_DMSP_F8_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -30,7 +30,7 @@"DMSP-F10/SSMI": {"id": "dmsp-f10-ssmi","title": "DMSP-F10/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F10",+ "description": "","image": "","settings": ["SSMI_DMSP_F10_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -40,7 +40,7 @@"DMSP-F11/SSMI": {"id": "dmsp-f11-ssmi","title": "DMSP-F11/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F11",+ "description": "","image": "","settings": ["SSMI_DMSP_F11_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -50,7 +50,7 @@"DMSP-F13/SSMI": {"id": "dmsp-f13-ssmi","title": "DMSP-F13/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F13",+ "description": "","image": "","settings": ["SSMI_DMSP_F13_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -60,7 +60,7 @@"DMSP-F14/SSMI": {"id": "dmsp-f14-ssmi","title": "DMSP-F14/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F14",+ "description": "","image": "","settings": ["SSMI_DMSP_F14_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -70,7 +70,7 @@"DMSP-F15/SSMI": {"id": "dmsp-f15-ssmi","title": "DMSP-F15/SSMI",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F15",+ "description": "","image": "","settings": ["SSMI_DMSP_F15_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -80,7 +80,7 @@"DMSP-F16/SSMIS": {"id": "dmsp-f16-ssmis","title": "DMSP-F16/SSMIS",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F16",+ "description": "","image": "","settings": ["SSMI_DMSP_F16_Cloud_Liquid_Water_Over_Oceans_Ascending",@@ -90,7 +90,7 @@"DMSP-F17/SSMIS": {"id": "dmsp-f17-ssmis","title": "DMSP-F17/SSMIS",- "description": "ssmi/CloudLiquidWaterOverOceansDMSP-F17",+ "description": "","image": "","settings": ["SSMI_DMSP_F17_Cloud_Liquid_Water_Over_Oceans_Ascending",diff --git a/config/default/common/config/wv.json/measurements/Cloud Multi Layer Flag.json b/config/default/common/config/wv.json/measurements/Cloud Multi Layer Flag.jsonindex 95439a5ff..003b9e61c 100644--- a/config/default/common/config/wv.json/measurements/Cloud Multi Layer Flag.json+++ b/config/default/common/config/wv.json/measurements/Cloud Multi Layer Flag.json@@ -8,7 +8,7 @@"Aqua/MODIS": {"id": "aqua-modis","title": "Aqua/MODIS",- "description": "modis/CloudMultiLayerFlag",+ "description": "","image": "","settings": ["MODIS_Aqua_Cloud_Multi_Layer_Flag",@@ -18,7 +18,7 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/CloudMultiLayerFlag",+ "description": "modis/terra/CloudMultiLayerFlag","image": "","settings": ["MODIS_Terra_Cloud_Multi_Layer_Flag",