Interactive interface for browsing global, full-resolution satellite imagery
CR, LSR, SST, LST, Lightning, Ozone descriptions
minniewong4ac190d39a39
diff --git a/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Count.md b/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Count.mdindex b759ebc63..dfade6370 100644--- a/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Count.md+++ b/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Count.md@@ -2,6 +2,4 @@ The ISS LIS Flash Count layer provides the number of lightning flashes recordedISS LIS supplies near real-time lightning data over data-sparse regions, such as oceans, to support operational weather forecasting and warning. ISS LIS standard science products are available at GHRC DAAC.-The Lightning Imaging Sensor (LIS) was placed on the International Space Station in Feb 2017. LIS is mounted to the station as part of the U.S. Department of Defense (DoD) Space Test Program (STP)-H5 science and technology development payload. By placing LIS on the space station, which has a highly inclined orbit, a greater geographic range of measurements are obtained than previously measured by TRMM LIS.--References: [GHRC: About ISS LIS Data](https://lance.nsstc.nasa.gov/iss-lis/index.html)+References: isslis_v1_nrt [doi:10.5067/LIS/ISSLIS/DATA106](https://doi.org/10.5067/LIS/ISSLIS/DATA106); isslis_v1_fin [doi:10.5067/LIS/ISSLIS/DATA108](https://doi.org/10.5067/LIS/ISSLIS/DATA108)diff --git a/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Radiance.md b/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Radiance.mdindex d42344557..7981eb5a2 100644--- a/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Radiance.md+++ b/config/default/common/config/metadata/layers/iss/LIS_ISS_Flash_Radiance.md@@ -2,6 +2,4 @@ The ISS LIS Flash Radiance layer provides the radiance of lightning flashes measISS LIS supplies near real-time lightning data over data-sparse regions, such as oceans, to support operational weather forecasting and warning. ISS LIS standard science products are available at GHRC DAAC.-The Lightning Imaging Sensor (LIS) was placed on the International Space Station in Feb 2017. LIS is mounted to the station as part of the U.S. Department of Defense (DoD) Space Test Program (STP)-H5 science and technology development payload. By placing LIS on the space station, which has a highly inclined orbit, a greater geographic range of measurements are obtained than previously measured by TRMM LIS.--References: [GHRC: About ISS LIS Data](https://lance.nsstc.nasa.gov/iss-lis/index.html)+References: isslis_v1_nrt [doi:10.5067/LIS/ISSLIS/DATA106](https://doi.org/10.5067/LIS/ISSLIS/DATA106); isslis_v1_fin [doi:10.5067/LIS/ISSLIS/DATA108](https://doi.org/10.5067/LIS/ISSLIS/DATA108)diff --git a/config/default/common/config/metadata/layers/iss/LightningFlashCount&Radiance.md b/config/default/common/config/metadata/layers/iss/LightningFlashCount&Radiance.mdindex 94d34db41..87cb828db 100644--- a/config/default/common/config/metadata/layers/iss/LightningFlashCount&Radiance.md+++ b/config/default/common/config/metadata/layers/iss/LightningFlashCount&Radiance.md@@ -1,7 +1,4 @@-The ISS LIS Flash Count layer provides the number of lightning flashes and the ISS LIS Flash Radiance layer provides the radiance of lightning flashes measured in μJ/sr/m<sup>2</sup>/μm recorded by the Lightning Imaging Sensor (LIS) on board the International Space Station (ISS).The ISS LIS provides total lightning measurements between +/- 48 degrees latitude which covers a geographic range that includes nearly all global lightning. ISS LIS monitors total global lightning in both day and night and provides important cross-sensor calibration and validation with the Geostationary Lightning Mapper (GLM) and ground-based lightning networks.--ISS LIS supplies near real-time lightning data over data-sparse regions, such as oceans, to support operational weather forecasting and warning. ISS LIS standard science products are available at GHRC DAAC.-+### About LISThe Lightning Imaging Sensor (LIS) was placed on the International Space Station in Feb 2017. LIS is mounted to the station as part of the U.S. Department of Defense (DoD) Space Test Program (STP)-H5 science and technology development payload. By placing LIS on the space station, which has a highly inclined orbit, a greater geographic range of measurements are obtained than previously measured by TRMM LIS.References: [GHRC: About ISS LIS Data](https://lance.nsstc.nasa.gov/iss-lis/index.html)diff --git a/config/default/common/config/metadata/layers/merra/MERRA2_Open_Water_Latent_Energy_Flux_Monthly.md b/config/default/common/config/metadata/layers/merra/MERRA2_Open_Water_Latent_Energy_Flux_Monthly.mdindex e6279f54f..88031672b 100644--- a/config/default/common/config/metadata/layers/merra/MERRA2_Open_Water_Latent_Energy_Flux_Monthly.md+++ b/config/default/common/config/metadata/layers/merra/MERRA2_Open_Water_Latent_Energy_Flux_Monthly.md@@ -1,3 +1,3 @@-The MERRA-2 Open Water Latent Energy Flux (Monthly) layer is created from M2TMNXOCN (or tavgM_2d_ocn_Nx). M2TMNXOCN is a time-averaged 2-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of ocean surface diagnostics, such as open water skin temperature (sea surface temperature), open water latent energy flux, open water upward sensible heat flux, and open water net downward longwave (or shortwave) flux. The collection also includes variance of certain parameters. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4.+The MERRA-2 Open Water Latent Energy Flux (Monthly) layer is created from the M2TMNXOCN (or tavgM_2d_ocn_Nx) data collection. M2TMNXOCN is a time-averaged 2-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of ocean surface diagnostics, such as open water skin temperature (sea surface temperature), open water latent energy flux, open water upward sensible heat flux, and open water net downward longwave (or shortwave) flux. The collection also includes variance of certain parameters. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4.References: M2TMNXOCN [doi:10.5067/4IASLIDL8EEC](https://doi.org/10.5067/4IASLIDL8EEC)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/merra/MERRA2_Ozone_Mixing_Ratio_50hPa_Monthly.md b/config/default/common/config/metadata/layers/merra/MERRA2_Ozone_Mixing_Ratio_50hPa_Monthly.mdindex e69de29bb..e4233f4d6 100644--- a/config/default/common/config/metadata/layers/merra/MERRA2_Ozone_Mixing_Ratio_50hPa_Monthly.md+++ b/config/default/common/config/metadata/layers/merra/MERRA2_Ozone_Mixing_Ratio_50hPa_Monthly.md@@ -0,0 +1,3 @@+The Ozone Mixing Ratio at 500hPa (Monthly) layer is created from the M2IMNPANA data collection. M2IMNPANA (or instM_3d_ana_Np) is an instantaneous 3-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of analyzed meteorological fields at 42 pressure levels, such as temperature, wind components, specific humidity, ozone mixing ratio, and geopotential height. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. The collection also includes certain quadratic information (such as the variance and covariance of certain parameters). MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4.++References: M2IMNPANA [doi:10.5067/V92O8XZ30XBI](https://doi.org/10.5067/V92O8XZ30XBI)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/merra/Ozone.md b/config/default/common/config/metadata/layers/merra/Ozone.mddeleted file mode 100644index 40062402b..000000000--- a/config/default/common/config/metadata/layers/merra/Ozone.md+++ /dev/null@@ -1,2 +0,0 @@-### Ozone Mixing Ratio at 50hPa (Monthly)-Temporal coverage: January 1980 - Present (most recent complete month)diff --git a/config/default/common/config/metadata/layers/misr/DHRReflectance.md b/config/default/common/config/metadata/layers/misr/DHRReflectance.mddeleted file mode 100644index 70338cc3b..000000000--- a/config/default/common/config/metadata/layers/misr/DHRReflectance.md+++ /dev/null@@ -1,8 +0,0 @@-### DHR Average (Monthly, Natural Color)-Temporal Coverage: March 2000 - present (Monthly)--The MISR DHR Average layer displays global directional-hemispherical reflectance (DHR) of MISR’s red, green, and blue bands averaged on a monthly basis. DHR, also known as the “black sky albedo,” is a unitless measure of the radiance reflected from the Earth’s surface under illumination from a single direction—in other words, it represents the reflectance off the Earth’s surface that would be measured if Earth had no atmosphere causing scattering of the Sun’s light. It is calculated by taking the integral of the bidirectional reflectance factor (BRF) over the hemisphere being viewed; BRFs are calculated from MISR data by multiplying the radiance measured in the red, green, and blue bands of MISR’s cameras by a conversion factor that accounts for the view angle of the camera and the solar zenith angle. DHR is used to study the behavior of the atmosphere closest to the surface (the boundary layer) as well as in studies of the Earth’s radiation budget.--This layer is produced from the DHR_average field of the MISR Level 3 Component Global Land Surface Product, which is turn a compilation of the MISR Level 2 Land Surface LandDHR field. It is available globally over land only on a monthly basis, with a spatial resolution of 0.5 degrees latitude by 0.5 degrees longitude. Coverage may be limited in areas with frequent cloudiness.--References: MISR Level 3 Component Global Land Product covering a month V004. [doi:10.5067/Terra/MISR/MIL3MLS_L3.004](https://doi.org/10.5067/Terra/MISR/MIL3MLS_L3.004)diff --git a/config/default/common/config/metadata/layers/misr/MISR_Directional_Hemispherical_Reflectance_Average_Natural_Color_Monthly.md b/config/default/common/config/metadata/layers/misr/MISR_Directional_Hemispherical_Reflectance_Average_Natural_Color_Monthly.mdindex 0bf396198..05e0ddea3 100644--- a/config/default/common/config/metadata/layers/misr/MISR_Directional_Hemispherical_Reflectance_Average_Natural_Color_Monthly.md+++ b/config/default/common/config/metadata/layers/misr/MISR_Directional_Hemispherical_Reflectance_Average_Natural_Color_Monthly.md@@ -2,5 +2,5 @@ The MISR DHR Average layer displays global directional-hemispherical reflectanceThis layer is produced from the DHR_average field of the MISR Level 3 Component Global Land Surface Product, which is turn a compilation of the MISR Level 2 Land Surface LandDHR field. It is available globally over land only on a monthly basis, with a spatial resolution of 0.5 degrees latitude by 0.5 degrees longitude. Coverage may be limited in areas with frequent cloudiness.-References: MISR Level 3 Component Global Land Product covering a month V004. [doi:10.5067/Terra/MISR/MIL3MLS_L3.004](https://doi.org/10.5067/Terra/MISR/MIL3MLS_L3.004)+References: MIL3MLS_L3 [doi:10.5067/Terra/MISR/MIL3MLS_L3.004](https://doi.org/10.5067/Terra/MISR/MIL3MLS_L3.004)diff --git a/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Day.md b/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Day.mdindex a70fbe421..0cb0124b1 100644--- a/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Day.md+++ b/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Day.md@@ -1,9 +1,5 @@The Microwave Limb Sounder (MLS) Ozone (O3) Mixing Ratio layer at 46hPa (hectopascals) indicates ozone levels at the vertical atmospheric pressure level of 46hPa, and is measured in parts per billion by volume (ppbv).-Ozone plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.--Ozone is a critical player in all three of the primary objectives of MLS: to track stability of the stratospheric ozone layer, to help improve predictions of climate change and variability, and to help improve understanding of global air quality. MLS ozone measurements contribute to understanding of processes that control the expected recovery of the ozone layer as abundances of human-produced, ozone depleting substances decline in the coming decades. Ozone, particularly in the upper troposphere (10 to 15 km), is an important greenhouse gas. While MLS does not measure ozone down to the Earth's surface, MLS measurements can be used to improve the vertical resolution of other sensors on the Aura satellite, allowing mid- and lower-tropospheric ozone to be distinguished from the large amounts of ozone in the stratosphere and upper troposphere. In the upper troposphere, ozone levels provide important information about the history of air parcels, with high ozone generally indicating descent from above and low ozone ascent from below.-The MLS Ozone (O3) Mixing Ratio 46hPa layer is derived from the MLS Ozone product (ML2O3_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [GES DISC - ML2O3_NRT: MLS/Aura Near-Real-Time L2 Ozone (O3) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2O3_NRT_004/summary); [MLS - O3 Product](https://mls.jpl.nasa.gov/products/o3_product.php)+References: [ML2O3_NRT](https://disc.gsfc.nasa.gov/datasets/ML2O3_NRT_004/summary)diff --git a/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Night.md b/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Night.mdindex a70fbe421..b0785414e 100644--- a/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Night.md+++ b/config/default/common/config/metadata/layers/mls/MLS_O3_46hPa_Night.md@@ -1,9 +1,5 @@The Microwave Limb Sounder (MLS) Ozone (O3) Mixing Ratio layer at 46hPa (hectopascals) indicates ozone levels at the vertical atmospheric pressure level of 46hPa, and is measured in parts per billion by volume (ppbv).-Ozone plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.--Ozone is a critical player in all three of the primary objectives of MLS: to track stability of the stratospheric ozone layer, to help improve predictions of climate change and variability, and to help improve understanding of global air quality. MLS ozone measurements contribute to understanding of processes that control the expected recovery of the ozone layer as abundances of human-produced, ozone depleting substances decline in the coming decades. Ozone, particularly in the upper troposphere (10 to 15 km), is an important greenhouse gas. While MLS does not measure ozone down to the Earth's surface, MLS measurements can be used to improve the vertical resolution of other sensors on the Aura satellite, allowing mid- and lower-tropospheric ozone to be distinguished from the large amounts of ozone in the stratosphere and upper troposphere. In the upper troposphere, ozone levels provide important information about the history of air parcels, with high ozone generally indicating descent from above and low ozone ascent from below.-The MLS Ozone (O3) Mixing Ratio 46hPa layer is derived from the MLS Ozone product (ML2O3_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [GES DISC - ML2O3_NRT: MLS/Aura Near-Real-Time L2 Ozone (O3) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2O3_NRT_004/summary); [MLS - O3 Product](https://mls.jpl.nasa.gov/products/o3_product.php)+References: [ML2O3_NRT](https://disc.gsfc.nasa.gov/datasets/ML2O3_NRT_004/summary)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/mls/O3.md b/config/default/common/config/metadata/layers/mls/O3.mdindex ef78a629f..b8369cec8 100644--- a/config/default/common/config/metadata/layers/mls/O3.md+++ b/config/default/common/config/metadata/layers/mls/O3.md@@ -1,12 +1,4 @@-### MLS Ozone (O3) Mixing Ratio 46hPa (Day | Night)-Temporal coverage: 9 May 2013 - present--The Microwave Limb Sounder (MLS) Ozone (O3) Mixing Ratio layer at 46hPa (hectopascals) indicates ozone levels at the vertical atmospheric pressure level of 46hPa, and is measured in parts per billion by volume (ppbv).--Ozone plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.+### About Ozone+Ozone (O3) plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.Ozone is a critical player in all three of the primary objectives of MLS: to track stability of the stratospheric ozone layer, to help improve predictions of climate change and variability, and to help improve understanding of global air quality. MLS ozone measurements contribute to understanding of processes that control the expected recovery of the ozone layer as abundances of human-produced, ozone depleting substances decline in the coming decades. Ozone, particularly in the upper troposphere (10 to 15 km), is an important greenhouse gas. While MLS does not measure ozone down to the Earth's surface, MLS measurements can be used to improve the vertical resolution of other sensors on the Aura satellite, allowing mid- and lower-tropospheric ozone to be distinguished from the large amounts of ozone in the stratosphere and upper troposphere. In the upper troposphere, ozone levels provide important information about the history of air parcels, with high ozone generally indicating descent from above and low ozone ascent from below.--The MLS Ozone (O3) Mixing Ratio 46hPa layer is derived from the MLS Ozone product (ML2O3_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is twice daily (day and night).--References: [GES DISC - ML2HNO3_NRT: MLS/Aura Near-Real-Time L2 Nitric Acid (HNO3) Mixing Ratio V004](https://disc.gsfc.nasa.gov/datasets/ML2HNO3_NRT_004/summary); [MLS - HNO3 Product](https://mls.jpl.nasa.gov/products/hno3_product.php)diff --git a/config/default/common/config/metadata/layers/modis/CorrectedReflectance.md b/config/default/common/config/metadata/layers/modis/CorrectedReflectance.mdindex b312131e9..34c52bc6f 100644--- a/config/default/common/config/metadata/layers/modis/CorrectedReflectance.md+++ b/config/default/common/config/metadata/layers/modis/CorrectedReflectance.md@@ -1,4 +1,6 @@### MODIS Corrected Reflectance vs. MODIS Surface ReflectanceThe MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.-References: MOD02QKM [doi:10.5067/MODIS/MOD02QKM.061](https://doi.org/10.5067/MODIS/MOD02QKM.061); MOD02HKM [doi:10.5067/MODIS/MOD02HKM.061](https://doi.org/10.5067/MODIS/MOD02HKM.061); MOD021KM [doi:10.5067/MODIS/MOD021KM.061](https://doi.org/10.5067/MODIS/MOD021KM.061); MYD02QKM [doi:10.5067/MODIS/MYD02QKM.061](https://doi.org/10.5067/MODIS/MYD02QKM.061); MYD02HKM [doi:10.5067/MODIS/MYD02HKM.061](https://doi.org/10.5067/MODIS/MYD02HKM.061); MYD021KM [doi:10.5067/MODIS/MYD021KM.061](https://doi.org/10.5067/MODIS/MYD021KM.061); [NASA Earthdata - Creating Reprojected True Color MODIS Images: A Tutorial](https://earthdata.nasa.gov/files/MODIS_True_Color.pdf); [NASA Earthdata - LANCE FAQ](https://earthdata.nasa.gov/faq/lance-faq#ed-CRvsSR)+References: MOD02QKM [doi:10.5067/MODIS/MOD02QKM.061](https://doi.org/10.5067/MODIS/MOD02QKM.061); MOD02HKM [doi:10.5067/MODIS/MOD02HKM.061](https://doi.org/10.5067/MODIS/MOD02HKM.061); MOD021KM [doi:10.5067/MODIS/MOD021KM.061](https://doi.org/10.5067/MODIS/MOD021KM.061); MYD02QKM [doi:10.5067/MODIS/MYD02QKM.061](https://doi.org/10.5067/MODIS/MYD02QKM.061); MYD02HKM [doi:10.5067/MODIS/MYD02HKM.061](https://doi.org/10.5067/MODIS/MYD02HKM.061); MYD021KM [doi:10.5067/MODIS/MYD021KM.061](https://doi.org/10.5067/MODIS/MYD021KM.061); [NASA Earthdata - Creating Reprojected True Color MODIS Images: A Tutorial](https://earthdata.nasa.gov/files/MODIS_True_Color.pdf); [NASA Earthdata - LANCE FAQ](https://earthdata.nasa.gov/faq/lance-faq#ed-CRvsSR)++NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/LandSurfaceReflectance.md b/config/default/common/config/metadata/layers/modis/LandSurfaceReflectance.mdindex aa0ac459f..34c52bc6f 100644--- a/config/default/common/config/metadata/layers/modis/LandSurfaceReflectance.md+++ b/config/default/common/config/metadata/layers/modis/LandSurfaceReflectance.md@@ -1,85 +1,6 @@-### MODIS (Terra/Aqua) Land Surface Reflectance (True Color)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--True Color: Red = Band 1, Green = Band 4, Blue = Band 3--These images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features.--The MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 500 m, imagery resolution is 500 m, and the temporal resolution is daily.--### MODIS (Terra/Aqua) Land Surface Reflectance (Bands 7, 2, 1)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--False Color: Red = Band 7, Green = Band 2, Blue = Band 1--This combination is most useful for distinguishing burn scars from naturally low vegetation or bare soil and enhancing floods. Vegetation will appear green and burned areas will appear reddish.--The MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 500 m, imagery resolution is 500 m, and the temporal resolution is daily.--#### Vegetation and bare ground-Vegetation is very reflective in the near infrared (Band 2), and absorbent in Band 1 and Band 7. Assigning that band to green means even the smallest hint of vegetation will appear bright green in the image. Naturally bare soil, like a desert, is reflective in all bands used in this image, but more so in the SWIR (Band 7, red) and so soils will often have a pinkish tinge.--#### Burned areas-When vegetation burns, burned area or fire-affected areas become characterized by deposits of charcoal and ash, removal of vegetation and/or alteration of vegetation structure. When bare soil is exposed, the brightness in Band 1 usually slightly increases, but that may be offset by the presence of black carbon residue. The near infrared (Band 2) will become darker, and Band 7 becomes more reflective. When assigned to red in the image, Band 7 will show burn scars as deep or bright red, depending on the type of vegetation burned, the amount of residue, or the completeness of the burn.--#### Water-Liquid water on the ground will be very dark since it absorbs in the red and the SWIR. Sediments in water appear dark blue. Ice and snow appear as bright turquoise. Clouds comprised of small water droplets scatter light equally in both the visible and the SWIR and will appear white. These clouds are usually lower to the ground and warmer. High and cold clouds are comprised of ice crystals and will appear turquoise.--### MODIS (Terra/Aqua) Land Surface Reflectance (Bands 1, 2, 1)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--False Color: Red = Band 1, Green = Band 2, Blue = Band 1--Vegetation is very reflective in the near infrared (Band 2), and absorbent in Band 1. Assigning band 2 to green means even the smallest hint of vegetation will appear bright green in the image. Liquid water on the ground will be very dark since it absorbs in the red and the SWIR and sediments in water appear pink. This band combination is good for identifying vegetation changes, drought and floods.--The MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 250 m, imagery resolution is 250 m, and the temporal resolution is daily.-### MODIS Corrected Reflectance vs. MODIS Surface ReflectanceThe MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.References: MOD02QKM [doi:10.5067/MODIS/MOD02QKM.061](https://doi.org/10.5067/MODIS/MOD02QKM.061); MOD02HKM [doi:10.5067/MODIS/MOD02HKM.061](https://doi.org/10.5067/MODIS/MOD02HKM.061); MOD021KM [doi:10.5067/MODIS/MOD021KM.061](https://doi.org/10.5067/MODIS/MOD021KM.061); MYD02QKM [doi:10.5067/MODIS/MYD02QKM.061](https://doi.org/10.5067/MODIS/MYD02QKM.061); MYD02HKM [doi:10.5067/MODIS/MYD02HKM.061](https://doi.org/10.5067/MODIS/MYD02HKM.061); MYD021KM [doi:10.5067/MODIS/MYD021KM.061](https://doi.org/10.5067/MODIS/MYD021KM.061); [NASA Earthdata - Creating Reprojected True Color MODIS Images: A Tutorial](https://earthdata.nasa.gov/files/MODIS_True_Color.pdf); [NASA Earthdata - LANCE FAQ](https://earthdata.nasa.gov/faq/lance-faq#ed-CRvsSR)-### MODIS (Terra/Aqua) Land Surface Reflectance (Level 2G, Daily, True Color)-Temporal coverage: 24 February 2000 - present (Terra); 4 July 2002 - present (Aqua)--True Color: Red = Band 1, Green = Band 4, Blue = Band 3--The Land Surface Reflectance (L2G, Daily, True Color) layers are created from the MOD09GA/MYD09GA product which provides an estimate of the surface spectral reflectance of Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Bands 1 through 7, corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Provided along with the 500 meter (m) surface reflectance, observation, and quality bands are a set of ten 1 kilometer (km) observation bands and geolocation flags. The reflectance layers from the MOD09GA are used as the source data for many of the MODIS land products.--These images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features.--References: MOD09GA [doi:10.5067/MODIS/MOD09GA.061](https://doi.org/10.5067/MODIS/MOD09GA.061); MYD09GA [doi:10.5067/MODIS/MYD09GA.061](https://doi.org/10.5067/MODIS/MYD09GA.061)--### MODIS (Terra/Aqua) Land Surface Reflectance (Level 3, 8-Day, True Color)-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)--True Color: Red = Band 1, Green = Band 4, Blue = Band 3--The Land Surface Reflectance (L3, 8-Day, True Color) layers are created from the Moderate Resolution Imaging Spectroradiometer (MODIS) Terra MOD09A1/ Aqua MYD09A1 product which provides an estimate of the surface spectral reflectance of Terra MODIS Bands 1 through 7 corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Along with the seven 500 meter (m) reflectance bands are two quality layers and four observation bands. For each pixel, a value is selected from all the acquisitions within the 8-day composite period. The criteria for the pixel choice include cloud and solar zenith. When several acquisitions meet the criteria the pixel with the minimum channel 3 (blue) value is used.--These images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features.--References: MOD09A1 [doi:10.5067/MODIS/MOD09A1.061](https://doi.org/10.5067/MODIS/MOD09A1.061); MYD09A1 [doi:10.5067/MODIS/MYD09A1.061](https://doi.org/10.5067/MODIS/MYD09A1.061)--### MODIS (Terra/Aqua) Land Surface Reflectance (Level 3, 8-Day, Bands 7-2-1)-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)--False Color: Red = Band 7, Green = Band 2, Blue = Band 1--The Land Surface Reflectance (L3, 8-Day, Bands 7-2-1) layers are created from the Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua MYD09A1/ Terra MOD09A1 product provides an estimate of the surface spectral reflectance of Aqua MODIS Bands 1 through 7 corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Along with the seven 500 meter (m) reflectance bands are a quality layer and four observation bands. For each pixel, a value is selected from all the acquisitions within the 8-day composite period. The criteria for the pixel choice include cloud and solar zenith. When several acquisitions meet the criteria the pixel with the minimum channel 3 (blue) value is used.--This combination is most useful for distinguishing burn scars from naturally low vegetation or bare soil and enhancing floods. This combination can also be used to distinguish snow and ice from clouds. Snow and ice are very reflective in the visible part of the spectrum (Band 1), and absorbent in Bands 2 (near infrared) and 7 (short-wave infrared, or SWIR). Thick ice and snow appear vivid sky blue, while small ice crystals in high-level clouds will also appear blueish, and water clouds will appear white.---References: MOD09A1 [doi:10.5067/MODIS/MOD09A1.061](https://doi.org/10.5067/MODIS/MOD09A1.061); MYD09A1 [doi:10.5067/MODIS/MYD09A1.061](https://doi.org/10.5067/MODIS/MYD09A1.061)--### MODIS (Terra/Aqua) Land Surface Reflectance (Level 3, 8-Day, Bands 1-2-1)-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)--The Land Surface Reflectance (L3, 8-Day, Bands 1-2-1) layers are created from the MOD09Q1/MYD09Q1 product which provides an estimate of the surface spectral reflectance of Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Bands 1 and 2, corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Provided along with the 250 meter (m) surface reflectance bands are two quality layers. For each pixel, a value is selected from all the acquisitions within the 8-day composite period. The criteria for the pixel choice include cloud and solar zenith. When several acquisitions meet the criteria the pixel with the minimum channel 3 (blue) value is used.--Vegetation is very reflective in the near infrared (Band 2), and absorbent in Band 1. Assigning band 2 to green means even the smallest hint of vegetation will appear bright green in the image. Liquid water on the ground will be very dark since it absorbs in the red and the SWIR and sediments in water appear pink. This band combination is good for identifying vegetation changes, drought and floods.--References: MOD09Q1 [doi:10.5067/MODIS/MOD09Q1.061](https://doi.org/10.5067/MODIS/MOD09Q1.061); MYD09Q1 [doi:10.5067/MODIS/MYD09Q1.061](https://doi.org/10.5067/MODIS/MYD09Q1.061)-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/LandSurfaceTemperature.md b/config/default/common/config/metadata/layers/modis/LandSurfaceTemperature.mdindex 41192cb2a..c39e02b91 100644--- a/config/default/common/config/metadata/layers/modis/LandSurfaceTemperature.md+++ b/config/default/common/config/metadata/layers/modis/LandSurfaceTemperature.md@@ -1,42 +1,6 @@-### MODIS (Terra/Aqua) Land Surface Temperature (Day | Night)-Temporal Coverage: 24 February 2000 - present (Terra); 3 July 2002 - present (Aqua)+NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-The MODIS Land Surface Temperature (Day | Night) layers show the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.+### About Land Surface Temperature+Land Surface Temperature is the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.-The MODIS Land Surface Temperature product is available from both Terra (MOD11) and Aqua (MYD11) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.--References: MYD11_L2 [doi:10.5067/MODIS/MYD11_L2.061](https://doi.org/10.5067/MODIS/MYD11_L2.061); MOD11_L2 [doi:10.5067/MODIS/MOD11_L2.061](https://doi.org/10.5067/MODIS/MOD11_L2.061); [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)--### MODIS (Terra/Aqua/ASTER) Land Surface Temperature (Day | Night)-Temporal coverage: 8 July 2021 - present (Terra); 9 July 2021 - present (Aqua)--The Land Surface Temperature (Day | Night) layer is from the new Land Surface Temperature and Emissivity (LST&E) product (MOD/MYD21), which is in addition to the heritage MOD11/MYD11 Land Surface Temperature (LST) product. It show the temperature of the land surface in Kelvin (K).--The MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.--The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.--References: MOD21 [doi:10.5067/MODIS/MOD21.061](https://doi.org/10.5067/MODIS/MOD21.061); MYD21 [doi:10.5067/MODIS/MYD21.061](https://doi.org/10.5067/MODIS/MYD21.061)--### MODIS (Terra/Aqua) Land Surface Temperature (Level 3, Daily, Day | Night)-Temporal coverage: 26 February 2000 - present (Terra); 3 July 2002 - present (Aqua)--The MODIS Land Surface Temperature (L3, Daily, Day | Night) layers show the daily, day-time | night-time land surface temperature in Kelvin (K). They are created from the MOD11A1/MYD11A1 product which provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution. The pixel temperature value is derived from the Terra MODIS LST&E swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. The Land Surface Temperature Day layer is a representation of daytime LST; and the Land Surface Temperature Night layer is a representation of nighttime LST.--References: MOD11A1 [doi:10.5067/MODIS/MOD11A1.061](https://doi.org/10.5067/MODIS/MOD11A1.061); MYD11A1 [doi:10.5067/MODIS/MYD11A1.061](https://doi.org/10.5067/MODIS/MYD11A1.061)--### MODIS (Terra/Aqua) Land Surface Temperature (Level 3, 8-Day, Day | Night)-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)--The Land Surface Temperature (L3, 8-Day, Day | Night) layers are created from The MOD11A2/MYD11A2 product which provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. Each pixel value in the MYD11A2 is a simple average of all the corresponding Aqua MODIS LST&E daily pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. The Land Surface Temperature Day layer is a representation of daytime LST; the Land Surface Temperature Night layer is a representation of nighttime LST.--References: MOD11A2 [doi:10.5067/MODIS/MOD11A2.061](https://doi.org/10.5067/MODIS/MOD11A2.061); MYD11A2 [doi:10.5067/MODIS/MYD11A2.061](https://doi.org/10.5067/MODIS/MYD11A2.061)--### MODIS (Terra/Aqua) Land Surface Temperature (Level 3, Monthly, Day | Night)-Temporal coverage: January 2003 - present (Terra); 1 July 2002 - present (Aqua)--The Land Surface Temperature (L3, Monthly, Day | Night) layers are created from the MOD11C3/MYD11C3 product which provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MYD11C3 product are derived by compositing and averaging the values from the corresponding month of Aqua MODIS LST&E daily files. The Land Surface Temperature Day layer is a representation of daytime LST; the Land Surface Temperature Night layer is a representation of nighttime LST.--References: MOD11C3 [doi:10.5067/MODIS/MOD11C3.061](https://doi.org/10.5067/MODIS/MOD11C3.061); MYD11C3 [doi:10.5067/MODIS/MYD11C3.061](https://doi.org/10.5067/MODIS/MYD11C3.061)--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.\ No newline at end of file+References: [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day.mdindex 09ac71c2d..217e2b3e7 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, 8-Day, Day) layer is created from the MYD11A2 product which provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. Each pixel value in the MYD11A2 is a simple average of all the corresponding Aqua MODIS LST&E daily pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. The Land Surface Temperature Day layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11A2 [doi:10.5067/MODIS/MYD11A2.061](https://doi.org/10.5067/MODIS/MYD11A2.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night.mdindex cd9f26050..cb2301bae 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, 8-Day, Night) layer is created from the MYD11A2 product which provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. Each pixel value in the MYD11A2 is a simple average of all the corresponding Aqua MODIS LST&E daily pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. The Land Surface Temperature Night layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11A2 [doi:10.5067/MODIS/MYD11A2.061](https://doi.org/10.5067/MODIS/MYD11A2.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day.mdindex a48dc9a74..d3d345fa6 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Daily, Day) layer is created from the MYD11A1 product which provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. The pixel temperature value is derived from the Aqua MODIS LST&E swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. The Land Surface Temperature Day layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11A1 [doi:10.5067/MODIS/MYD11A1.061](https://doi.org/10.5067/MODIS/MYD11A1.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night.mdindex 2a90c9654..889cdaad9 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Daily, Night) layer is created from the MYD11A1 product which provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution in a 1,200 by 1,200 km grid. The pixel temperature value is derived from the Aqua MODIS LST&E swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. The Land Surface Temperature Night layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11A1 [doi:10.5067/MODIS/MYD11A1.061](https://doi.org/10.5067/MODIS/MYD11A1.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Day.mdindex 8f65772e7..e814d4296 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Day.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Day.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Monthly, Day) layer is created from the MYD11C3 product which provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MYD11C3 product are derived by compositing and averaging the values from the corresponding month of Aqua MODIS LST&E daily files. The Land Surface Temperature Day layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11C3 [doi:10.5067/MODIS/MYD11C3.061](https://doi.org/10.5067/MODIS/MYD11C3.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Night.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Night.mdindex 11d8d0883..1e45f6f30 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Night.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_Night.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Monthly, Night) layer is created from the MYD11C3 product which provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MYD11C3 product are derived by compositing and averaging the values from the corresponding month of Aqua MODIS LST&E daily files. The Land Surface Temperature Night layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11C3 [doi:10.5067/MODIS/MYD11C3.061](https://doi.org/10.5067/MODIS/MYD11C3.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Day.mdindex f05901a14..a1df2fc45 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Day.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Day.md@@ -1,7 +1,5 @@-The MODIS Land Surface Temperature (Day) layer shows the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.+The MODIS Land Surface Temperature (Day) layer shows the temperature of the land surface in Kelvin (K).The MODIS Land Surface Temperature product is available from both Terra (MOD11) and Aqua (MYD11) satellites for day and nighttime overpasses. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11_L2 [doi:10.5067/MODIS/MYD11_L2.061](https://doi.org/10.5067/MODIS/MYD11_L2.061); [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Night.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Night.mdindex a8b1c4f45..d5a0a0a60 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Night.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_Land_Surface_Temp_Night.md@@ -1,7 +1,5 @@-The MODIS Land Surface Temperature (Night) layer shows the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.+The MODIS Land Surface Temperature (Night) layer shows the temperature of the land surface in Kelvin (K).The MODIS Land Surface Temperature product is available from both Terra (MOD11) and Aqua (MYD11) satellites for day and nighttime overpasses. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD11_L2 [doi:10.5067/MODIS/MYD11_L2.061](https://doi.org/10.5067/MODIS/MYD11_L2.061); [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands121.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands121.mdindex bbdfd782e..9cd13f877 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands121.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands121.md@@ -4,10 +4,4 @@ Vegetation is very reflective in the near infrared (Band 2), and absorbent in BaThe MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 250 m, imagery resolution is 250 m, and the temporal resolution is daily.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD09 NRT [doi:10.5067/MODIS/MYD09.NRT.061](https://doi.org/10.5067/MODIS/MYD09.NRT.061); MYD09 [doi:10.5067/MODIS/MYD09.061](https://doi.org/10.5067/MODIS/MYD09.061)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands143.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands143.mdindex f8614095a..83168ffcb 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands143.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands143.md@@ -4,10 +4,4 @@ These images are called true-color or natural color because this combination ofThe MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 500 m, imagery resolution is 500 m, and the temporal resolution is daily.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD09 NRT [doi:10.5067/MODIS/MYD09.NRT.061](https://doi.org/10.5067/MODIS/MYD09.NRT.061); MYD09 [doi:10.5067/MODIS/MYD09.061](https://doi.org/10.5067/MODIS/MYD09.061)diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands721.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands721.mdindex 33a645007..17195cb21 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands721.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_SurfaceReflectance_Bands721.md@@ -13,10 +13,4 @@ When vegetation burns, burned area or fire-affected areas become characterized b#### WaterLiquid water on the ground will be very dark since it absorbs in the red and the SWIR. Sediments in water appear dark blue. Ice and snow appear as bright turquoise. Clouds comprised of small water droplets scatter light equally in both the visible and the SWIR and will appear white. These clouds are usually lower to the ground and warmer. High and cold clouds are comprised of ice crystals and will appear turquoise.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MYD09 NRT [doi:10.5067/MODIS/MYD09.NRT.061](https://doi.org/10.5067/MODIS/MYD09.NRT.061); MYD09 [doi:10.5067/MODIS/MYD09.061](https://doi.org/10.5067/MODIS/MYD09.061)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/combined/LandSurfaceReflectance.md b/config/default/common/config/metadata/layers/modis/combined/LandSurfaceReflectance.mdindex 955da7eaf..4cedcbc92 100644--- a/config/default/common/config/metadata/layers/modis/combined/LandSurfaceReflectance.md+++ b/config/default/common/config/metadata/layers/modis/combined/LandSurfaceReflectance.md@@ -1,20 +1,2 @@-### MODIS (Terra and Aqua) MAIAC Reflectance (BRDF-Adjusted)-Temporal coverage: 28 September 2019 - present--The MAIAC Reflectance (BRDF-Adjusted) layer is an RGB image of Multi-Angle Implementation of Atmospheric Correction (MAIAC) surface reflectance (SR) over land based on MODIS bands 1, 4, 3, normalized to a fixed geometry of nadir view and 45° sun angle using MAIAC BRDF. The image is produced over cloud-free land and coastal ocean daily, at 1km resolution.--MAIAC Collection 6 provides daily SR at 1km (bands 1-12) and 500m (bands 1-7) resolution (product MCD19A1) separately for MODIS Terra and Aqua. MAIAC BRDF model is reported for MODIS bands 1-12 at 1km resolution once every 8 days.--The MAIAC Reflectance (BRDF-Adjusted) layer is available as a combined Terra satellite and Aqua satellite layer (MCD19A1). The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.--References: [doi: 10.5067/MODIS/MCD19A1N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A1N.NRT.006)--### MODIS (Terra and Aqua) Land Surface Reflectance (Level 3, Nadir BRDF-Adjusted (NBAR), Daily)-Temporal coverage: 24 February 2000 - present--The Land Surface Reflectance (L3, Nadir, BRDF-Adjusted (NBAR), Daily) layer is created from the Moderate Resolution Imaging Spectroradiometer (MODIS) MCD43A4 Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Land Surface Reflectance (NBAR) dataset which is produced daily using 16 days of Terra and Aqua MODIS data at 500 meter (m) resolution. The view angle effects are removed from the directional reflectances, resulting in a stable and consistent NBAR product. Data are temporally weighted to the ninth day which is reflected in the Julian date in the file name. This NBAR layer is a representation of MODIS reflectance bands 1, 4 and 3.--References: MCD43A4 [doi:10.5067/MODIS/MCD43A4.061](https://doi.org/10.5067/MODIS/MCD43A4.061)-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L3_Nadir-BRDF_Daily.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L3_Nadir-BRDF_Daily.mdindex 65c15fcbc..dd2b1588e 100644--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L3_Nadir-BRDF_Daily.md+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L3_Nadir-BRDF_Daily.md@@ -1,5 +1,3 @@The Land Surface Reflectance (L3, Nadir, BRDF-Adjusted (NBAR), Daily) layer is created from the Moderate Resolution Imaging Spectroradiometer (MODIS) MCD43A4 Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Land Surface Reflectance (NBAR) dataset which is produced daily using 16 days of Terra and Aqua MODIS data at 500 meter (m) resolution. The view angle effects are removed from the directional reflectances, resulting in a stable and consistent NBAR product. Data are temporally weighted to the ninth day which is reflected in the Julian date in the file name. This NBAR layer is a representation of MODIS reflectance bands 1, 4 and 3.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MCD43A4 [doi:10.5067/MODIS/MCD43A4.061](https://doi.org/10.5067/MODIS/MCD43A4.061)diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L2G_BidirectionalReflectance_Bands143.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L2G_BidirectionalReflectance_Bands143.mdindex 5a646378e..eb6338210 100644--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L2G_BidirectionalReflectance_Bands143.md+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L2G_BidirectionalReflectance_Bands143.md@@ -4,4 +4,4 @@ MAIAC Collection 6 provides daily SR at 1km (bands 1-12) and 500m (bands 1-7) reThe MAIAC Reflectance (BRDF-Adjusted) layer is available as a combined Terra satellite and Aqua satellite layer (MCD19A1). The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is daily.-References: [doi: 10.5067/MODIS/MCD19A1N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A1N.NRT.006)+References: MCD19A1N NRT [doi:10.5067/MODIS/MCD19A1N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A1N.NRT.006)diff --git a/config/default/common/config/metadata/layers/modis/terra/CorrectedReflectance.md b/config/default/common/config/metadata/layers/modis/terra/CorrectedReflectance.mdnew file mode 100644index 000000000..cbd0adc9b--- /dev/null+++ b/config/default/common/config/metadata/layers/modis/terra/CorrectedReflectance.md@@ -0,0 +1,8 @@+### MODIS Corrected Reflectance vs. MODIS Surface Reflectance+The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.++References: MOD02QKM [doi:10.5067/MODIS/MOD02QKM.061](https://doi.org/10.5067/MODIS/MOD02QKM.061); MOD02HKM [doi:10.5067/MODIS/MOD02HKM.061](https://doi.org/10.5067/MODIS/MOD02HKM.061); MOD021KM [doi:10.5067/MODIS/MOD021KM.061](https://doi.org/10.5067/MODIS/MOD021KM.061); MYD02QKM [doi:10.5067/MODIS/MYD02QKM.061](https://doi.org/10.5067/MODIS/MYD02QKM.061); MYD02HKM [doi:10.5067/MODIS/MYD02HKM.061](https://doi.org/10.5067/MODIS/MYD02HKM.061); MYD021KM [doi:10.5067/MODIS/MYD021KM.061](https://doi.org/10.5067/MODIS/MYD021KM.061); [NASA Earthdata - Creating Reprojected True Color MODIS Images: A Tutorial](https://earthdata.nasa.gov/files/MODIS_True_Color.pdf); [NASA Earthdata - LANCE FAQ](https://earthdata.nasa.gov/faq/lance-faq#ed-CRvsSR)++**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).++NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/LandSurfaceReflectance.md b/config/default/common/config/metadata/layers/modis/terra/LandSurfaceReflectance.mdnew file mode 100644index 000000000..cbd0adc9b--- /dev/null+++ b/config/default/common/config/metadata/layers/modis/terra/LandSurfaceReflectance.md@@ -0,0 +1,8 @@+### MODIS Corrected Reflectance vs. MODIS Surface Reflectance+The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.++References: MOD02QKM [doi:10.5067/MODIS/MOD02QKM.061](https://doi.org/10.5067/MODIS/MOD02QKM.061); MOD02HKM [doi:10.5067/MODIS/MOD02HKM.061](https://doi.org/10.5067/MODIS/MOD02HKM.061); MOD021KM [doi:10.5067/MODIS/MOD021KM.061](https://doi.org/10.5067/MODIS/MOD021KM.061); MYD02QKM [doi:10.5067/MODIS/MYD02QKM.061](https://doi.org/10.5067/MODIS/MYD02QKM.061); MYD02HKM [doi:10.5067/MODIS/MYD02HKM.061](https://doi.org/10.5067/MODIS/MYD02HKM.061); MYD021KM [doi:10.5067/MODIS/MYD021KM.061](https://doi.org/10.5067/MODIS/MYD021KM.061); [NASA Earthdata - Creating Reprojected True Color MODIS Images: A Tutorial](https://earthdata.nasa.gov/files/MODIS_True_Color.pdf); [NASA Earthdata - LANCE FAQ](https://earthdata.nasa.gov/faq/lance-faq#ed-CRvsSR)++**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).++NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands367.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands367.mdindex cf59ac3a8..c2702eb7d 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands367.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands367.md@@ -1,7 +1,3 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------False Color: Red = Band 3, Green = Band 6, Blue = Band 7This combination is used to map snow and ice. Snow and ice are very reflective in the visible part of the spectrum (Band 3), and very absorbent in Bands 6 and 7 (short-wave infrared, or SWIR). This band combination is good for distinguishing liquid water from frozen water, for example, clouds over snow, ice cloud versus water cloud; or floods from dense vegetation. This band combination is only available for MODIS (Terra) because 70% of the band 6 sensors on the MODIS instrument on the Aqua satellite failed shortly after launch.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands721.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands721.mdindex bc6e27787..cc11df5e0 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands721.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_Bands721.md@@ -1,7 +1,3 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------False Color: Red = Band 7, Green = Band 2, Blue = Band 1This combination is most useful for distinguishing burn scars from naturally low vegetation or bare soil and enhancing floods. This combination can also be used to distinguish snow and ice from clouds. Snow and ice are very reflective in the visible part of the spectrum (Band 1), and absorbent in Bands 2 (near infrared) and 7 (short-wave infrared, or SWIR). Thick ice and snow appear vivid sky blue, while small ice crystals in high-level clouds will also appear blueish, and water clouds will appear white.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_TrueColor.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_TrueColor.mdindex 96d40f483..dcd832e16 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_TrueColor.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_CorrectedReflectance_TrueColor.md@@ -1,7 +1,3 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------True Color: Red = Band 1, Green = Band 4, Blue = Band 3These images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features. The downside of this set of bands is that they tend to produce a hazy image.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2G_SurfaceReflectance_Bands143_Daily.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2G_SurfaceReflectance_Bands143_Daily.mdindex 41b9c35da..ac9ffe2fb 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2G_SurfaceReflectance_Bands143_Daily.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L2G_SurfaceReflectance_Bands143_Daily.md@@ -1,7 +1,3 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------True Color: Red = Band 1, Green = Band 4, Blue = Band 3The Land Surface Reflectance (L2G, Daily, True Color) layer is created from the MOD09GA product which provides an estimate of the surface spectral reflectance of Terra Moderate Resolution Imaging Spectroradiometer (MODIS) Bands 1 through 7, corrected for atmospheric conditions such as gasses, aerosols, and Rayleigh scattering. Provided along with the 500 meter (m) surface reflectance, observation, and quality bands are a set of ten 1 kilometer (km) observation bands and geolocation flags. The reflectance layers from the MOD09GA are used as the source data for many of the MODIS land products.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day.mdindex 55f52c821..20105b7a1 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day.md@@ -1,5 +1,3 @@The MODIS Land Surface Temperature (L3, 8-Day, Day) layer displays 8-day, day-time land surface temperature in Kelvin (K). It is created from the MOD11A2 product which provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution. Each pixel value in the MOD11A2 is a simple average of all the corresponding Terra MODIS Land Surface Temperature & Emissivity (LST&E) daily pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. The Land Surface Temperature layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11A2 [doi:10.5067/MODIS/MOD11A2.061](https://doi.org/10.5067/MODIS/MOD11A2.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night.mdindex b1bf0ef29..4606d011c 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night.md@@ -1,5 +1,3 @@The MODIS Land Surface Temperature (L3, 8-Day, Night) layer displays 8-day night time land surface temperature in Kelvin (K). It is created from the MOD11A2 product which provides an average 8-day per-pixel Land Surface Temperature and Emissivity (LST&E) with a 1 kilometer (km) spatial resolution. Each pixel value in the MOD11A2 is a simple average of all the corresponding Terra MODIS Land Surface Temperature & Emissivity (LST&E) daily pixels collected within that 8-day period. The 8-day compositing period was chosen because twice that period is the exact ground track repeat period of the Terra and Aqua platforms. The Land Surface Temperature layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11A2 [doi:10.5067/MODIS/MOD11A2.061](https://doi.org/10.5067/MODIS/MOD11A2.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day.mdindex ac59e829d..1bd013441 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day.md@@ -1,5 +1,3 @@The MODIS Land Surface Temperature (L3, Daily, Day) layer shows the daily, day-time land surface temperature in Kelvin (K). It is created from the MOD11A1 product which provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution. The pixel temperature value is derived from the Terra MODIS LST&E swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. The Land Surface Temperature layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11A1 [doi:10.5067/MODIS/MOD11A1.061](https://doi.org/10.5067/MODIS/MOD11A1.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night.mdindex 0980794bf..bdf3933c1 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night.md@@ -1,5 +1,3 @@The MODIS Land Surface Temperature (L3, Daily, Night) layer shows daily, night-time land surface temperature in Kelvin (K). It is created from the MOD11A1 product which provides daily per-pixel Land Surface Temperature and Emissivity (LST&E) with 1 kilometer (km) spatial resolution. The pixel temperature value is derived from the Terra MODIS LST&E swath product. Above 30 degrees latitude, some pixels may have multiple observations where the criteria for clear-sky are met. When this occurs, the pixel value is a result of the average of all qualifying observations. The Land Surface Temperature layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11A1 [doi:10.5067/MODIS/MOD11A1.061](https://doi.org/10.5067/MODIS/MOD11A1.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Day.mdindex afbb76eca..9c4d04021 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Day.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Monthly, Day) layers show monthly, day time land surface temperature in Kelvin (K). It is created from the MOD11C3 product provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MOD11C3 product are derived by compositing and averaging the values from the corresponding month of Terra MODIS LST&E daily files. The Land Surface Temperature layer is a representation of daytime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11C3 [doi:10.5067/MODIS/MOD11C3.061](https://doi.org/10.5067/MODIS/MOD11C3.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Night.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Night.mdindex e35dcb771..dd74b5160 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Night.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_Night.md@@ -1,5 +1,3 @@The Land Surface Temperature (L3, Monthly, Night) layer shows monthly, night time land surface temperature in Kelvin (K). It is created from the MOD11C3 product provides monthly Land Surface Temperature and Emissivity (LST&E) values in a 0.05 degree (5,600 meters at the equator) latitude/longitude Climate Modeling Grid (CMG). A CMG granule is a geographic grid with 7,200 columns and 3,600 rows representing the entire globe. The LST&E values in the MOD11C3 product are derived by compositing and averaging the values from the corresponding month of the Terra MODIS LST&E daily files. The Land Surface Temperature layer is a representation of nighttime LST.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD11C3 [doi:10.5067/MODIS/MOD11C3.061](https://doi.org/10.5067/MODIS/MOD11C3.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands121_8Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands121_8Day.mdindex 61eff7a5b..c4d6f849d 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands121_8Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands121_8Day.md@@ -4,6 +4,4 @@ The Land Surface Reflectance (L3, 8-Day, Bands 1-2-1) layer is created from theVegetation is very reflective in the near infrared (Band 2), and absorbent in Band 1. Assigning band 2 to green means even the smallest hint of vegetation will appear bright green in the image. Liquid water on the ground will be very dark since it absorbs in the red and the SWIR and sediments in water appear pink. This band combination is good for identifying vegetation changes, drought and floods.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09Q1 [doi:10.5067/MODIS/MOD09Q1.061](https://doi.org/10.5067/MODIS/MOD09Q1.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands143_8Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands143_8Day.mdindex 78b4bcb71..6218055dd 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands143_8Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands143_8Day.md@@ -4,6 +4,4 @@ The Land Surface Reflectance (L3, 8-Day, True Color) layer is created from the MThese images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09A1 [doi:10.5067/MODIS/MOD09A1.061](https://doi.org/10.5067/MODIS/MOD09A1.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands721_8Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands721_8Day.mdindex 310a283f7..ed0bf94a9 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands721_8Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_SurfaceReflectance_Bands721_8Day.md@@ -4,6 +4,4 @@ The Land Surface Reflectance (L3, 8-Day, Bands 7-2-1) layer is created from theThis combination is most useful for distinguishing burn scars from naturally low vegetation or bare soil and enhancing floods. This combination can also be used to distinguish snow and ice from clouds. Snow and ice are very reflective in the visible part of the spectrum (Band 1), and absorbent in Bands 2 (near infrared) and 7 (short-wave infrared, or SWIR). Thick ice and snow appear vivid sky blue, while small ice crystals in high-level clouds will also appear blueish, and water clouds will appear white.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09A1 [doi:10.5067/MODIS/MOD09A1.061](https://doi.org/10.5067/MODIS/MOD09A1.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Day.mdindex 5a62399e1..387a5379c 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Day.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Day.md@@ -1,7 +1,5 @@-The MODIS Land Surface Temperature (Day) layer shows the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.+The MODIS Land Surface Temperature (Day) layer shows the temperature of the land surface in Kelvin (K).The MODIS Land Surface Temperature product is available from both Terra (MOD11) and Aqua (MYD11) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.--References: MOD11_L2 [doi:10.5067/MODIS/MOD11_L2.061](https://doi.org/10.5067/MODIS/MOD11_L2.061); [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)+References: MOD11_L2 [doi:10.5067/MODIS/MOD11_L2.061](https://doi.org/10.5067/MODIS/MOD11_L2.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Night.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Night.mdindex 06c84a51a..d1daf567c 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Night.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_Land_Surface_Temp_Night.md@@ -1,7 +1,5 @@-The MODIS Land Surface Temperature (Night) layer shows the temperature of the land surface in Kelvin (K). This measurement differs from air temperature measurements as it provides the temperature of whatever is on the surface of the Earth for example, bare sand in the desert, ice and snow covered area, a leaf covered tree canopy and even the temperature of man-made buildings and roads. Land Surface Temperature is useful for monitoring changes in weather and climate patterns and used in agriculture to allow farmers to evaluate water requirements for wheat, or determine frost damage in orange groves.+The MODIS Land Surface Temperature (Night) layer shows the temperature of the land surface in Kelvin (K).The MODIS Land Surface Temperature product is available from both Terra (MOD11) and Aqua (MYD11) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.--References: MOD11_L2 [doi:10.5067/MODIS/MOD11_L2.061](https://doi.org/10.5067/MODIS/MOD11_L2.061); [NASA Earth Observations - Land Surface Temperature](https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MOD11C1_M_LSTDA)\ No newline at end of file+References: MOD11_L2 [doi:10.5067/MODIS/MOD11_L2.061](https://doi.org/10.5067/MODIS/MOD11_L2.061)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands121.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands121.mdindex 67d9c8934..0babd664b 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands121.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands121.md@@ -1,17 +1,7 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------False Color: Red = Band 1, Green = Band 2, Blue = Band 1Vegetation is very reflective in the near infrared (Band 2), and absorbent in Band 1. Assigning band 2 to green means even the smallest hint of vegetation will appear bright green in the image. Liquid water on the ground will be very dark since it absorbs in the red and the SWIR and sediments in water appear pink. This band combination is good for identifying vegetation changes, drought and floods.The MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 250 m, imagery resolution is 250 m, and the temporal resolution is daily.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD/MYD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD/MYD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09 NRT [doi:10.5067/MODIS/MOD09.NRT.061](https://doi.org/10.5067/MODIS/MOD09.NRT.061); MOD09 [doi:10.5067/MODIS/MOD09.061](https://doi.org/10.5067/MODIS/MOD09.061)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands143.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands143.mdindex de458757e..7193f14bf 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands143.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands143.md@@ -1,19 +1,9 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------True Color: Red = Band 1, Green = Band 4, Blue = Band 3These images are called true-color or natural color because this combination of wavelengths is similar to what the human eye would see. The images are natural-looking images of land surface, oceanic and atmospheric features.The MODIS Land Surface Reflectance product is available from both the Terra (MOD09) and Aqua (MYD09) satellites. The sensor resolution is 500 m, imagery resolution is 500 m, and the temporal resolution is daily.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD/MYD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD/MYD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09 NRT [doi:10.5067/MODIS/MOD09.NRT.061](https://doi.org/10.5067/MODIS/MOD09.NRT.061); MOD09 [doi:10.5067/MODIS/MOD09.061](https://doi.org/10.5067/MODIS/MOD09.061)diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands721.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands721.mdindex 66161da8f..07004b1f4 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands721.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_SurfaceReflectance_Bands721.md@@ -1,7 +1,3 @@-**4 May 2021 Notice**: The MODIS instrument aboard the Terra satellite experienced a Printed Wire Assembly (PWA) failure on 5 October 2020. This has resulted in a reduction in the overall Terra daytime coverage and many of the MODIS/Terra imagery layers have a slightly jagged appearance at the poles. This issue will affect land daytime MODIS/Terra products that primarily rely on the Reflective Solar Bands (RSB) (i.e. visible bands) indefinitely. [Learn more about the issue](https://landweb.modaps.eosdis.nasa.gov/cgi-bin/QA_WWW/displayCase.cgi?esdt=MOD&caseNum=PM_MOD_20280&caseLocation=cases_data&type=C6).------False Color: Red = Band 7, Green = Band 2, Blue = Band 1This combination is most useful for distinguishing burn scars from naturally low vegetation or bare soil and enhancing floods. Vegetation will appear green and burned areas will appear reddish.@@ -17,11 +13,5 @@ When vegetation burns, burned area or fire-affected areas become characterized b#### WaterLiquid water on the ground will be very dark since it absorbs in the red and the SWIR. Sediments in water appear dark blue. Ice and snow appear as bright turquoise. Clouds comprised of small water droplets scatter light equally in both the visible and the SWIR and will appear white. These clouds are usually lower to the ground and warmer. High and cold clouds are comprised of ice crystals and will appear turquoise.-### MODIS Corrected Reflectance vs. MODIS Surface Reflectance--The MODIS Corrected Reflectance algorithm utilizes MODIS Level 1B data (the calibrated, geolocated radiances). It is not a standard, science quality product. The purpose of this algorithm is to provide natural-looking images by removing gross atmospheric effects, such as Rayleigh scattering, from MODIS visible bands 1-7. The algorithm was developed by the original MODIS Rapid Response team to address the needs of the fire monitoring community who want to see smoke. Corrected Reflectance shows smoke more clearly than the standard Surface Reflectance product. In contrast, the MODIS Land Surface Reflectance product (MOD/MYD09) is a more complete atmospheric correction algorithm that includes aerosol correction, and is designed to derive land surface properties. In clear atmospheric conditions the Corrected Reflectance product is very similar to the MOD/MYD09 product, but they depart from each other in presence of aerosols. If you wish to perform a complete atmospheric correction, please do not use the Corrected Reflectance algorithm. An additional difference is that the Land Surface Reflectance product is only tuned for calculating the reflectance over land surfaces.--NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.-References: MOD09 NRT [doi:10.5067/MODIS/MOD09.NRT.061](https://doi.org/10.5067/MODIS/MOD09.NRT.061); MOD09 [doi:10.5067/MODIS/MOD09.061](https://doi.org/10.5067/MODIS/MOD09.061)diff --git a/config/default/common/config/metadata/layers/multi-mission/LightningFlashRate.md b/config/default/common/config/metadata/layers/multi-mission/LightningFlashRate.mddeleted file mode 100644index 187274e80..000000000--- a/config/default/common/config/metadata/layers/multi-mission/LightningFlashRate.md+++ /dev/null@@ -1,9 +0,0 @@-The TRMM/LIS, OrbView-1/OTD Lightning Flash Rate (Combined) layer indicates the average lightning flash rate over an area in number of flashes per square kilometers per year (Flashes/km<sup>2</sup>/year) from 4 May 1995 to 31 December 2013. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Lightning Imaging Sensor (LIS) on the Tropical Measuring Mission (TRMM) satellite and the Optical Transient Detector (OTD) on the OrbView-1 satellite, and then calculated the frequency of each lightning flash.--The LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location. The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.--References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-[Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-[Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414](https://doi.org/10.1016/j.atmosres.2012.06.028); [GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf)diff --git a/config/default/common/config/metadata/layers/multi-mission/aviso/AVISO_Absolute_Dynamic_Topography.md b/config/default/common/config/metadata/layers/multi-mission/aviso/AVISO_Absolute_Dynamic_Topography.mdindex 9e1c8871d..b71a4ad2a 100644--- a/config/default/common/config/metadata/layers/multi-mission/aviso/AVISO_Absolute_Dynamic_Topography.md+++ b/config/default/common/config/metadata/layers/multi-mission/aviso/AVISO_Absolute_Dynamic_Topography.md@@ -1,3 +1,3 @@The Absolute Dynamic Topography (AVISO ADT) layer is based on the absolute dynamic topography data (similar to sea level but with respect to the geoid), on monthly 1 degree grids. These data were generated to help support the CMIP5 (Coupled Model Intercomparison Project Phase 5) portion of PCMDI (Program for Climate Model Diagnosis and Intercomparison). The dynamic topograhy are from sea surface height measured by several satellites, Envisat, TOPEX/Poseidon, Jason-1 and OSTM/Jason-2 and referenced to the geoid.-References: [AVISO Level 4 Absolute Dynamic Topography for Climate Model Comparison](https://podaac.jpl.nasa.gov/dataset/AVISO_L4_DYN_TOPO_1DEG_1MO)+References: AVISO_L4_DYN_TOPO_1DEG_1MO [doi:10.5067/DYNTO-1D1M1](https://doi.org/10.5067/DYNTO-1D1M1)diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_L30_Nadir_BRDF_Adjusted_Reflectance.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_L30_Nadir_BRDF_Adjusted_Reflectance.mdindex 0ce6b43cc..9382052c1 100644--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_L30_Nadir_BRDF_Adjusted_Reflectance.md+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_L30_Nadir_BRDF_Adjusted_Reflectance.md@@ -1,9 +1,5 @@The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI is a true-color or natural color image because this combination of wavelengths is similar to what the human eye would see. It consists of natural-looking images of land surface, oceanic and atmospheric features. The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI provides 30m Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectance (NBAR) and is derived from the joint NASA/USGS Landsat 8 Operational Land Imager (OLI) data product through the Harmonized Landsat and Sentinel-2 (HLS) project.-The HLS project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The combined measurements between Landsat 8, Sentinel-2A, and Sentinel-2B enable global observations of the land every 2-3 days at 30 meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment.-The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with a 16 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel 2A and Sentinel 2B imagery layer available.-Note: PROVISIONAL - The Harmonized Landsat and Sentinel-2 (HLS) data have not been validated for their science quality and should not be used in science research or applications.--References: [HLSL30 v015: HLS Landsat-8 OLI Surface Reflectance and TOA Brightness Daily Global 30 m](https://lpdaac.usgs.gov/products/hlsl30v015/); [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)+References: HLSL30 v015 [doi:10.5067/HLS/HLSL30.015](https://doi.org/10.5067/HLS/HLSL30.015)diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.mdindex 8073b32ea..ccf937c13 100644--- a/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md+++ b/config/default/common/config/metadata/layers/multi-mission/hls/HLS_S30_Nadir_BRDF_Adjusted_Reflectance.md@@ -1,9 +1,5 @@The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Sentinel 2A and 2B/MSI is a true-color or natural color image because this combination of wavelengths is similar to what the human eye would see. It consists of natural-looking images of land surface, oceanic and atmospheric features. The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Sentinel 2A and 2B/MSI provides 30m Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectance (NBAR) and is derived from a combination of the European Union’s Copernicus Sentinel-2A and Sentinel-2B Multi-Spectral Instrument (MSI) data products through the Harmonized Landsat and Sentinel-2 (HLS) project.-The HLS project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The combined measurements between Landsat 8, Sentinel-2A, and Sentinel-2B enable global observations of the land every 2-3 days at 30 meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment.-The Reflectance (Nadir BRDF-Adjusted, v1.5) product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate Landsat imagery layer available.-Note: PROVISIONAL - The Harmonized Landsat and Sentinel-2 (HLS) data have not been validated for their science quality and should not be used in science research or applications.--References: [HLSS30 v015: HLS Sentinel-2 Multi-Spectral Instrument Surface Reflectance Daily Global 30 m](https://lpdaac.usgs.gov/products/hlss30v015/); [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)+References: HLSS30 v015 [doi:10.5067/HLS/HLSS30.015](https://doi.org/10.5067/HLS/HLSS30.015)diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md b/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.mdnew file mode 100644index 000000000..746964a15--- /dev/null+++ b/config/default/common/config/metadata/layers/multi-mission/hls/Reflectance.md@@ -0,0 +1,7 @@+### About HLS+The Harmonized Landsat and Sentinel-2 (HLS) project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The combined measurements between Landsat 8, Sentinel-2A, and Sentinel-2B enable global observations of the land every 2-3 days at 30 meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment.++Note: PROVISIONAL - The Harmonized Landsat and Sentinel-2 (HLS) data have not been validated for their science quality and should not be used in science research or applications.++References: [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)+diff --git a/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceLandsat.md b/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceLandsat.mddeleted file mode 100644index ee490f0c2..000000000--- a/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceLandsat.md+++ /dev/null@@ -1,21 +0,0 @@-### Landsat 8/OLI Reflectance (Nadir BRDF-Adjusted, v1.5)-Temporal coverage: 15 January 2020 - Present--The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI is a true-color or natural color image because this combination of wavelengths is similar to what the human eye would see. It consists of natural-looking images of land surface, oceanic and atmospheric features. The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI provides 30m Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectance (NBAR) and is derived from the joint NASA/USGS Landsat 8 Operational Land Imager (OLI) data product through the Harmonized Landsat and Sentinel-2 (HLS) project.--The HLS project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The combined measurements between Landsat 8, Sentinel-2A, and Sentinel-2B enable global observations of the land every 2-3 days at 30 meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment.--The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Landsat 8/OLI product (L30) is available through the HLS project from the Operational Land Imager (OLI) aboard the Landsat 8. The sensor resolution is 30 m, imagery resolution is 30 m, and the temporal resolution is daily with a 16 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate combined Sentinel 2A and Sentinel 2B imagery layer available.--Note: PROVISIONAL - The Harmonized Landsat and Sentinel-2 (HLS) data have not been validated for their science quality and should not be used in science research or applications.--References: [HLSS30 v015: HLS Sentinel-2 Multi-Spectral Instrument Surface Reflectance Daily Global 30 m](https://lpdaac.usgs.gov/products/hlss30v015/); [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)--### MGRS/HLS Grid-The MGRS/HLS Grid layer displays the tiling system for the Harmonized Landsat Sentinel-2 (HLS) data. It is based on the Universal Transverse Mercator (UTM) projection-based Military Grid Reference System (MGRS), and reprojected into Geographic projection.--The UTM system divides the Earth’s surface into 60 longitude zones, each 6° of longitude in width, numbered 1 to 60 from 180° West to 180° East. Each UTM zone is divided into latitude bands of 8°, labeled with letters C to X from South to North. A useful mnemonic is that latitude bands N and later are in the Northern Hemisphere. When zoomed into higher zoom levels, it is visible that each 6°x8° polygon (grid zone) is further divided into the 110km x 110km Sentinel-2 tiles labeled with letters. For example, tile 11SPC is in UTM zone 11, latitude band S (in Northern Hemisphere), and labeled P in the east-west direction and C in the south-north direction within grid zone 11S. Users should note that there is horizontal and vertical overlap of around 8-10 km between two adjacent tiles in the same UTM zone. The overlap between two adjacent tiles both straddling a UTM zone boundary may be much greater.--The MGRS/HLS Grid layer is a reference layer and does not change over time.--References: [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceSentinel2.md b/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceSentinel2.mddeleted file mode 100644index 1e92a94a4..000000000--- a/config/default/common/config/metadata/layers/multi-mission/hls/ReflectanceSentinel2.md+++ /dev/null@@ -1,19 +0,0 @@-### Sentinel 2A & 2B/MSI Reflectance (Nadir BRDF-Adjusted, v1.5)-Temporal coverage: 29 September 2020 - Present--The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Sentinel 2A and 2B/MSI is a true-color or natural color image because this combination of wavelengths is similar to what the human eye would see. It consists of natural-looking images of land surface, oceanic and atmospheric features. The Reflectance (Nadir BRDF Adjusted, v1.5) imagery layer from Sentinel 2A and 2B/MSI provides 30m Nadir Bidirectional Reflectance Distribution Function (BRDF)-Adjusted Reflectance (NBAR) and is derived from a combination of the European Union’s Copernicus Sentinel-2A and Sentinel-2B Multi-Spectral Instrument (MSI) data products through the Harmonized Landsat and Sentinel-2 (HLS) project.--The HLS project provides consistent surface reflectance data from the Operational Land Imager (OLI) aboard the joint NASA/USGS Landsat 8 satellite and the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The combined measurements between Landsat 8, Sentinel-2A, and Sentinel-2B enable global observations of the land every 2-3 days at 30 meter (m) spatial resolution. The HLS project uses a set of algorithms to obtain seamless products from OLI and MSI that include atmospheric correction, cloud and cloud-shadow masking, spatial co-registration and common gridding, illumination and view angle normalization, and spectral bandpass adjustment.--The Reflectance (Nadir BRDF-Adjusted, v1.5) product (S30) is available through the HLS project from the Multi-Spectral Instrument (MSI) aboard the European Union’s Copernicus Sentinel-2A and Sentinel-2B satellites. The sensor resolution is 10, 20, and 60 m, imagery resolution is resampled to 30 m, and the temporal resolution is daily with a 5 day revisit time. The imagery is available in Worldview/GIBS approximately 2 - 4 days after satellite overpass. There is a separate Landsat imagery layer available.--Note: PROVISIONAL - The Harmonized Landsat and Sentinel-2 (HLS) data have not been validated for their science quality and should not be used in science research or applications.--### MGRS/HLS Grid-The MGRS/HLS Grid layer displays the tiling system for the Harmonized Landsat Sentinel-2 (HLS) data. It is based on the Universal Transverse Mercator (UTM) projection-based Military Grid Reference System (MGRS), and reprojected into Geographic projection.--The UTM system divides the Earth’s surface into 60 longitude zones, each 6° of longitude in width, numbered 1 to 60 from 180° West to 180° East. Each UTM zone is divided into latitude bands of 8°, labeled with letters C to X from South to North. A useful mnemonic is that latitude bands N and later are in the Northern Hemisphere. When zoomed into higher zoom levels, it is visible that each 6°x8° polygon (grid zone) is further divided into the 110km x 110km Sentinel-2 tiles labeled with letters. For example, tile 11SPC is in UTM zone 11, latitude band S (in Northern Hemisphere), and labeled P in the east-west direction and C in the south-north direction within grid zone 11S. Users should note that there is horizontal and vertical overlap of around 8-10 km between two adjacent tiles in the same UTM zone. The overlap between two adjacent tiles both straddling a UTM zone boundary may be much greater.--The MGRS/HLS Grid layer is a reference layer and does not change over time.--References: [Harmonized Landsat Sentinel-2 (HLS) Product User Guide](https://lpdaac.usgs.gov/documents/878/HLS_User_Guide_V15_provisional.pdf)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/multi-mission/trmm_orbview/LIS_High_Resolution_Full_Climatology_Combined_Flash_Rate_Climatology.md b/config/default/common/config/metadata/layers/multi-mission/trmm_orbview/LIS_High_Resolution_Full_Climatology_Combined_Flash_Rate_Climatology.mdindex cfe4ff9e0..e378b2bca 100644--- a/config/default/common/config/metadata/layers/multi-mission/trmm_orbview/LIS_High_Resolution_Full_Climatology_Combined_Flash_Rate_Climatology.md+++ b/config/default/common/config/metadata/layers/multi-mission/trmm_orbview/LIS_High_Resolution_Full_Climatology_Combined_Flash_Rate_Climatology.md@@ -2,8 +2,4 @@ The TRMM/LIS, OrbView-1/OTD Lightning Flash Rate (Combined) layer indicates theThe LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location. The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003, [doi: 10.1029/2002JD002347](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414, [doi:10.1016/j.atmosres.2012.06.028](https://doi.org/10.1016/j.atmosres.2012.06.028); [GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ols/OLS_DMSP_F10_Digital_Derived_Lightning.md b/config/default/common/config/metadata/layers/ols/OLS_DMSP_F10_Digital_Derived_Lightning.mdindex 8b1378917..543daed1c 100644--- a/config/default/common/config/metadata/layers/ols/OLS_DMSP_F10_Digital_Derived_Lightning.md+++ b/config/default/common/config/metadata/layers/ols/OLS_DMSP_F10_Digital_Derived_Lightning.md@@ -1 +1,3 @@+The Digital Derived Lightning (Level 3, Standard) layer is created from the OLS Digital Derived Lightning from DMSP F10 dataset. It consists of global lightning signatures from the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) flown on DMSP 5D-2/F10 that have been analyzed from visible channel imagery. These signatures show up as horizontal streaks on the images. The time and location of each of these streaks have been extracted and are stored by month in HDF data files. Data are available from February 1, 1994 through May 31, 1994.+References: olsdig10 [doi:10.5067/LIS/OLS/DATA302](https://doi.org/10.5067/LIS/OLS/DATA302)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/ols/OLS_DMSP_F12_Digital_Derived_Lightning.md b/config/default/common/config/metadata/layers/ols/OLS_DMSP_F12_Digital_Derived_Lightning.mdindex 8b1378917..a77d95542 100644--- a/config/default/common/config/metadata/layers/ols/OLS_DMSP_F12_Digital_Derived_Lightning.md+++ b/config/default/common/config/metadata/layers/ols/OLS_DMSP_F12_Digital_Derived_Lightning.md@@ -1 +1,3 @@+The Digital Derived Lightning (Level 2, Standard) layer is created from the OLS Digital Derived Lightning from DMSP F12 dataset. It consists of global lightning signatures from the Defense Meteorological Satellite Program (DMSP) Operational Linescan System (OLS) flown on DMSP 5D-2/F12 that have been analyzed from the visible channel imagery. These signatures show up as horizontal streaks on the images. The time and location of each of these streaks have been extracted and are stored by month in HDF data files. Data are available from May 1, 1995 through November 30, 1995.+References: olsdig12 [doi:10.5067/LIS/OLS/DATA303](https://doi.org/10.5067/LIS/OLS/DATA303)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/omi/AerosolIndex.md b/config/default/common/config/metadata/layers/omi/AerosolIndex.mdindex a87adb8ac..7cf8fa034 100644--- a/config/default/common/config/metadata/layers/omi/AerosolIndex.md+++ b/config/default/common/config/metadata/layers/omi/AerosolIndex.md@@ -1,3 +1,2 @@### Aerosols-Aerosols absorb and scatter incoming sunlight, which reduces visibility and increases the optical depth. Aerosols have an effect on human health, weather and the climate. Sources of aerosols include pollution from factories, smoke from fires, dust from dust storms, sea salts, and volcanic ash and smog. Aerosols compromise human health when inhaled by people with asthma or other respiratory illnesses. Aerosols also have an effect on the weather and climate by cooling or warming the Earth, helping or preventing clouds from forming.\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/omi/OMI_Ozone_DOAS_Total_Column.md b/config/default/common/config/metadata/layers/omi/OMI_Ozone_DOAS_Total_Column.mdindex 04e5effb4..53ac120d7 100644--- a/config/default/common/config/metadata/layers/omi/OMI_Ozone_DOAS_Total_Column.md+++ b/config/default/common/config/metadata/layers/omi/OMI_Ozone_DOAS_Total_Column.md@@ -2,4 +2,4 @@ The OMI Total Ozone Differential Optical Absorption Spectroscopy (DOAS) layer inThe OMDOA3e product provides daily gridded global coverage with a temporal resolution of 1 day, imagery resolution of 2 km, and a sensor/algorithm resolution of 0.25 x 0.25 degrees.-References: [OMDOAO3e README](https://acdisc.gesdisc.eosdis.nasa.gov/data/Aura_OMI_Level3/OMDOAO3e.003/doc/OMDOAO3e_OSIPS_README_V003.doc); [ATBD II](https://eospso.gsfc.nasa.gov/sites/default/files/atbd/ATBD-OMI-02.pdf); [doi: 10.5067/Aura/OMI/DATA3005](https://disc.gsfc.nasa.gov/datacollection/OMDOAO3e_V003.html); [KNMI: Ozone](http://projects.knmi.nl/omi/research/product/product_generator.php?info=page&product=Ozone&flavour=OMDOAO3&long=DOAS%20Total%20Ozone%20column)+References: OMDOAO3e [doi:10.5067/Aura/OMI/DATA3005](https://doi.org/10.5067/Aura/OMI/DATA3005)diff --git a/config/default/common/config/metadata/layers/omi/OMI_Ozone_TOMS_Total_Column.md b/config/default/common/config/metadata/layers/omi/OMI_Ozone_TOMS_Total_Column.mdindex 03e87ff9e..6fbcb7407 100644--- a/config/default/common/config/metadata/layers/omi/OMI_Ozone_TOMS_Total_Column.md+++ b/config/default/common/config/metadata/layers/omi/OMI_Ozone_TOMS_Total_Column.md@@ -2,4 +2,4 @@ The OMI Ozone (TOMS-Like) layer indicates the total ozone column and is measuredThe Ozone Monitoring Instrument (OMI) Level-3 total ozone product (OMTO3e) product provides daily gridded global coverage with a temporal resolution of 1 day, imagery resolution of 2 km, and sensor/algorithm resolution of 0.25 x 0.25 degrees.-References: [OMTO3e README](https://acdisc.gesdisc.eosdis.nasa.gov/data/Aura_OMI_Level3/OMTO3e.003/doc/OMTO3e_OSIPS_README_V003.doc); [doi: 10.5067/Aura/OMI/DATA3002](https://disc.gsfc.nasa.gov/datacollection/OMTO3e_V003.html)+References: OMTO3e [[doi:10.5067/Aura/OMI/DATA3002](https://doi.org/10.5067/Aura/OMI/DATA3002)diff --git a/config/default/common/config/metadata/layers/omi/Ozone.md b/config/default/common/config/metadata/layers/omi/Ozone.mdindex 2c77d7c4c..b8369cec8 100644--- a/config/default/common/config/metadata/layers/omi/Ozone.md+++ b/config/default/common/config/metadata/layers/omi/Ozone.md@@ -1,17 +1,4 @@-### Ozone (DOAS)-Temporal Coverage: 1 October 2004 - Present+### About Ozone+Ozone (O3) plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.-The OMI Total Ozone Differential Optical Absorption Spectroscopy (DOAS) layer indicates the total ozone column and is measured in Dobson Units (DU). The Ozone Monitoring Instrument (OMI) Level-3 total ozone DOAS product (OMDOAO3e) product is one of two total ozone products provided by the OMI instrument and is calculated with the DOAS technique using a 5-nm spectral fitting window centered around 341 nm. The DOAS technique that has been widely used to measure trace gases from the ground. This ozone column is estimated from longer wavelengths than those used in the TOMS algorithm. In principle, DOAS is less sensitive to disturbing effects by absorbing aerosols, SO2, and calibration errors than the TOMS algorithm.--The OMDOA3e product provides daily gridded global coverage with a temporal resolution of 1 day, imagery resolution of 2 km, and a sensor/algorithm resolution of 0.25 x 0.25 degrees.--References: [OMDOAO3e README](https://acdisc.gesdisc.eosdis.nasa.gov/data/Aura_OMI_Level3/OMDOAO3e.003/doc/OMDOAO3e_OSIPS_README_V003.doc); [ATBD II](https://eospso.gsfc.nasa.gov/sites/default/files/atbd/ATBD-OMI-02.pdf); [doi: 10.5067/Aura/OMI/DATA3005](https://disc.gsfc.nasa.gov/datacollection/OMDOAO3e_V003.html); [KNMI: Ozone](http://projects.knmi.nl/omi/research/product/product_generator.php?info=page&product=Ozone&flavour=OMDOAO3&long=DOAS%20Total%20Ozone%20column)--### Ozone (TOMS-Like)-Temporal Coverage: 1 October 2004 - Present--The OMI Ozone (TOMS-Like) layer indicates the total ozone column and is measured in Dobson Units (DU). The OMTO3 product is one of two total ozone products provided by the OMI instrument and is calculated using the Total Ozone Mapping Spectrometer (TOMS) Version-8 algorithm using UV radiance measurements 317.5 and 331.2 nm. The TOMS data record goes back 25 years and this layer provides continuity to that data record.--The Ozone Monitoring Instrument (OMI) Level-3 total ozone product (OMTO3e) product provides daily gridded global coverage with a temporal resolution of 1 day, imagery resolution of 2 km, and sensor/algorithm resolution of 0.25 x 0.25 degrees.--References: [OMTO3e README](https://acdisc.gesdisc.eosdis.nasa.gov/data/Aura_OMI_Level3/OMTO3e.003/doc/OMTO3e_OSIPS_README_V003.doc); [doi: 10.5067/Aura/OMI/DATA3002](https://disc.gsfc.nasa.gov/datacollection/OMTO3e_V003.html)+Ozone is a critical player in all three of the primary objectives of MLS: to track stability of the stratospheric ozone layer, to help improve predictions of climate change and variability, and to help improve understanding of global air quality. MLS ozone measurements contribute to understanding of processes that control the expected recovery of the ozone layer as abundances of human-produced, ozone depleting substances decline in the coming decades. Ozone, particularly in the upper troposphere (10 to 15 km), is an important greenhouse gas. While MLS does not measure ozone down to the Earth's surface, MLS measurements can be used to improve the vertical resolution of other sensors on the Aura satellite, allowing mid- and lower-tropospheric ozone to be distinguished from the large amounts of ozone in the stratosphere and upper troposphere. In the upper troposphere, ozone levels provide important information about the history of air parcels, with high ozone generally indicating descent from above and low ozone ascent from below.diff --git a/config/default/common/config/metadata/layers/omps/OMPS_Ozone_Total_Column.md b/config/default/common/config/metadata/layers/omps/OMPS_Ozone_Total_Column.mdindex c8074a4f5..b12028332 100644--- a/config/default/common/config/metadata/layers/omps/OMPS_Ozone_Total_Column.md+++ b/config/default/common/config/metadata/layers/omps/OMPS_Ozone_Total_Column.md@@ -2,4 +2,4 @@ The OMPS Ozone layer indicates the amount of ozone in the total column and is meThe OMPS-NPP L2 NM Ozone (O3) Total Column swath orbital product provides total ozone measurements from the Ozone Mapping and Profiler Suite (OMPS) Nadir-Mapper (NM) instrument on the Suomi NPP satellite. The total column ozone amount is derived from normalized radiances using 2 wavelength pairs 317.5 and 331.2 nm under most conditions, and 331.2 and 360 nm for high ozone and high solar zenith angle conditions. Additionally, this data product contains measurements of UV aerosol index and reflectivity at 331 nm. Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, each has typically 400 swaths. The swath width of the NM is about 2800 km with 36 scenes, or pixels, with a footprint size of 50 km x 50 km at nadir.-References: [NMTO3NRT](https://search.earthdata.nasa.gov/search?q=NMTO3NRT)+References: [NMTO3NRT](https://cmr.earthdata.nasa.gov/search/concepts/C1439272084-OMINRT.html); OMPS_NPP_NMTO3_L2 [doi:10.5067/0WF4HAAZ0VHK](https://doi.org/10.5067/0WF4HAAZ0VHK)diff --git a/config/default/common/config/metadata/layers/omps/Ozone.md b/config/default/common/config/metadata/layers/omps/Ozone.mdindex 24ca6cc31..ae72d3d1e 100644--- a/config/default/common/config/metadata/layers/omps/Ozone.md+++ b/config/default/common/config/metadata/layers/omps/Ozone.md@@ -1,8 +1,5 @@-### Ozone-Temporal coverage: 26 January 2012 - Present+### About Ozone+Ozone plays important roles in atmospheric chemistry and radiative balance throughout the atmosphere. Chemically, it is a powerful oxidant. Radiatively, it is an important greenhouse gas, particularly at 10 to 15 km. At the Earth's surface, it is a toxic component of air pollution with significant public health and agricultural impacts. The stratospheric ozone layer from 15 to 50 km absorbs UV radiation, protecting life at the surface and, through heating by the absorbed radiation, largely determines the temperature structure of the middle atmosphere.-The OMPS Ozone layer indicates the amount of ozone in the total column and is measured in Dobson Units (DU).+Ozone is a critical player in all three of the primary objectives of MLS: to track stability of the stratospheric ozone layer, to help improve predictions of climate change and variability, and to help improve understanding of global air quality. MLS ozone measurements contribute to understanding of processes that control the expected recovery of the ozone layer as abundances of human-produced, ozone depleting substances decline in the coming decades. Ozone, particularly in the upper troposphere (10 to 15 km), is an important greenhouse gas. While MLS does not measure ozone down to the Earth's surface, MLS measurements can be used to improve the vertical resolution of other sensors on the Aura satellite, allowing mid- and lower-tropospheric ozone to be distinguished from the large amounts of ozone in the stratosphere and upper troposphere. In the upper troposphere, ozone levels provide important information about the history of air parcels, with high ozone generally indicating descent from above and low ozone ascent from below.-The OMPS-NPP L2 NM Ozone (O3) Total Column swath orbital product provides total ozone measurements from the Ozone Mapping and Profiler Suite (OMPS) Nadir-Mapper (NM) instrument on the Suomi NPP satellite. The total column ozone amount is derived from normalized radiances using 2 wavelength pairs 317.5 and 331.2 nm under most conditions, and 331.2 and 360 nm for high ozone and high solar zenith angle conditions. Additionally, this data product contains measurements of UV aerosol index and reflectivity at 331 nm. Each granule contains data from the daylight portion of each orbit measured for a full day. Spatial coverage is global (-90 to 90 degrees latitude), and there are about 14.5 orbits per day, each has typically 400 swaths. The swath width of the NM is about 2800 km with 36 scenes, or pixels, with a footprint size of 50 km x 50 km at nadir.--References: [NMTO3NRT](https://search.earthdata.nasa.gov/search?q=NMTO3NRT)diff --git a/config/default/common/config/metadata/layers/orbview/LightningFlashes&Rate.md b/config/default/common/config/metadata/layers/orbview/LightningFlashes&Rate.mddeleted file mode 100644index 96fef3687..000000000--- a/config/default/common/config/metadata/layers/orbview/LightningFlashes&Rate.md+++ /dev/null@@ -1,28 +0,0 @@-### Lightning Flashes (Raw)-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The OrbView-1/OTD Lightning Flashes (Raw) layer indicates the average number of total raw lightning flashes from 4 May 1995 to 31 December 2013. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Optical Transient Detector (OTD) instrument on the OrbView-1 satellite.--The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.--### Lightning Flashes (Scaled)-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The OrbView-1/ OTD Lightning Flashes (Scaled) layer indicates the average number of total scaled lightning flashes from 4 May 1995 to 31 December 20133. The scaled flashes are the raw lightning flashes that have been scaled by detection efficiency values of the instruments, which varies throughout the day since lightning is easier to detect at night than during the day. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Optical Transient Detector (OTD) on the OrbView-1 satellite, and then were scaled to be more regional measurements.--The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.--### Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The OrbView-1/ OTD Lightning Flash Rate layer indicates the average lightning flash rate over an area in number of flashes per square kilometers per year (Flashes/km<sup>2</sup>/year) from 4 May 1995 to 31 December 2013. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Optical Transient Detector (OTD) on the OrbView-1 satellite, and then calculated the frequency of each lightning flash.--The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.--References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003, [doi:10.1029/2002JD002347](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414, [doi:10.1016/j.atmosres.2012.06.028](https://doi.org/10.1016/j.atmosres.2012.06.028)--### Calibrated Flash Radiance (OTD / Microlab-1)-Temporal coverage: 13 April 1995 - 23 March 2000diff --git a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Flash_Rate_Climatology.md b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Flash_Rate_Climatology.mdindex 5915d197b..e328145d8 100644--- a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Flash_Rate_Climatology.md+++ b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Flash_Rate_Climatology.md@@ -2,7 +2,4 @@ The OrbView-1/OTD Lightning Flash Rate layer indicates the average lightning flaThe OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003, [doi:10.1029/2002JD002347](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414, [doi:10.1016/j.atmosres.2012.06.028](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)diff --git a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Raw_Flashes.md b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Raw_Flashes.mdindex 6aa37ef4c..78a7a3aea 100644--- a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Raw_Flashes.md+++ b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Raw_Flashes.md@@ -2,7 +2,4 @@ The OrbView-1/OTD Lightning Flashes (Raw) layer indicates the average number ofThe OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003, [doi:10.1029/2002JD002347](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414, [doi:10.1016/j.atmosres.2012.06.028](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)diff --git a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Scaled_Flashes.md b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Scaled_Flashes.mdindex 1f2ebdc8c..b8ba1ea7e 100644--- a/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Scaled_Flashes.md+++ b/config/default/common/config/metadata/layers/orbview/OTD_High_Resolution_Full_Climatology_OTD_Scaled_Flashes.md@@ -1,8 +1,5 @@-The OrbView-1/ OTD Lightning Flashes (Scaled) layer indicates the average number of total scaled lightning flashes from 4 May 1995 to 31 December 20133. The scaled flashes are the raw lightning flashes that have been scaled by detection efficiency values of the instruments, which varies throughout the day since lightning is easier to detect at night than during the day. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Optical Transient Detector (OTD) on the OrbView-1 satellite, and then were scaled to be more regional measurements.+The OrbView-1/ OTD Lightning Flashes (Scaled) layer indicates the average number of total scaled lightning flashes from 4 May 1995 to 31 December 2013. The scaled flashes are the raw lightning flashes that have been scaled by detection efficiency values of the instruments, which varies throughout the day since lightning is easier to detect at night than during the day. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Optical Transient Detector (OTD) on the OrbView-1 satellite, and then were scaled to be more regional measurements.The OTD instrument detects both intra-cloud and cloud-to-ground lightning discharges during day and night conditions with a high detection efficiency. The OTD located the lightning discharges that occurred within its field-of-view and marked the time of occurrence of the lightning.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-Christian, H.J., et al, Global frequency and distribution of lightning as observed from space by the Optical Transient Detector, J. Geophys. Res., 108(D1), 4005, 2003, [doi:10.1029/2002JD002347](https://doi.org/10.1029/2002JD002347);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414, [doi:10.1016/j.atmosres.2012.06.028](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)diff --git a/config/default/common/config/metadata/layers/orbview/OTD_OrbView1_Flash_Radiance.md b/config/default/common/config/metadata/layers/orbview/OTD_OrbView1_Flash_Radiance.mdindex 8b1378917..959740238 100644--- a/config/default/common/config/metadata/layers/orbview/OTD_OrbView1_Flash_Radiance.md+++ b/config/default/common/config/metadata/layers/orbview/OTD_OrbView1_Flash_Radiance.md@@ -1 +1,5 @@+The Calibrated Flash Radiance (OTD/Microlab-1) layer displays radiance of lightning flashes measured in μJ/sr/m<sup>2</sup>/μm as recorded by the Optical Transient Detector (OTD).+The Optical Transient Detector (OTD) records optical measurements of global lightning events in the daytime and nighttime. The data includes individual point (lightning) data, satellite metadata, and several derived products. The OTD was launched on 3 April 1995 aboard the Microlab-1 satellite into a near polar orbit with an inclination of 70 degrees with respect to the equator, at an altitude of 740 km.++References: otdlip [doi:10.5067/LIS/OTD/DATA101](https://doi.org/10.5067/LIS/OTD/DATA101)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Flash_Rate_Climatology.md b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Flash_Rate_Climatology.mdindex 8cc8a4b30..fac570909 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Flash_Rate_Climatology.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Flash_Rate_Climatology.md@@ -2,8 +2,4 @@ The TRMM/LIS Lightning Flash Rate layer indicates the average lightning flash raThe LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-[GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-[Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)diff --git a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Raw_Flashes.md b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Raw_Flashes.mdindex a254c8d2c..dfd294022 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Raw_Flashes.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Raw_Flashes.md@@ -2,8 +2,4 @@ The TRMM/LIS Lightning Flashes (Raw) layer indicates the average number of totalThe LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-[GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-[Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Scaled_Flashes.md b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Scaled_Flashes.mdindex 2a77b23b7..ef6e6c03c 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Scaled_Flashes.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_High_Resolution_Full_Climatology_LIS_Scaled_Flashes.md@@ -2,8 +2,4 @@ The TRMM/LIS Lightning Flashes (Scaled) layer indicates the average number of toThe LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.-References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-[GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-[Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414](https://doi.org/10.1016/j.atmosres.2012.06.028)+References: lohrfc [doi:10.5067/LIS/LIS-OTD/DATA302](https://doi.org/10.5067/LIS/LIS-OTD/DATA302)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_TRMM_Flash_Radiance.md b/config/default/common/config/metadata/layers/trmm/LIS_TRMM_Flash_Radiance.mdindex 8b1378917..a826c4de9 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_TRMM_Flash_Radiance.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_TRMM_Flash_Radiance.md@@ -1 +1,5 @@+The Flash Radiance (Level 2, Standard) layer displays the radiance of lightning flashes measured in μJ/sr/m<sup>2</sup>/μm as recorded by the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite.+The Lightning Imaging Sensor (LIS) Science Data was collected by the LIS instrument on the Tropical Rainfall Measuring Mission (TRMM) satellite used to detect the distribution and variability of total lightning occurring in the Earth’s tropical and subtropical regions. This data can be used for severe storm detection and analysis, as well as for lightning-atmosphere interaction studies. The LIS instrument makes measurements during both day and night with high detection efficiency.++References: lislip [doi:10.5067/LIS/LIS/DATA201](https://doi.org/10.5067/LIS/LIS/DATA201)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Daily_Climatology_LIS_Mean_Flash_Rate.md b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Daily_Climatology_LIS_Mean_Flash_Rate.mdindex e69de29bb..17d7dea5e 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Daily_Climatology_LIS_Mean_Flash_Rate.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Daily_Climatology_LIS_Mean_Flash_Rate.md@@ -0,0 +1,3 @@+The Daily Mean Lightning Flash Rate layer is created from the LIS 0.1 Degree Very High Resolution Gridded Lightning Annual Climatology (VHRAC) dataset consists of gridded annual climatologies of total lightning flash rates seen by the Lightning Imaging Sensor (LIS) from January 1, 1998 through December 31, 2013. The Flash Rate is reported in flashes/km<sup>2</sup>/day. LIS is an instrument on the Tropical Rainfall Measurement Mission satellite (TRMM) used to detect the distribution and variability of total lightning occurring in the Earth's tropical and subtropical regions. This information can be used for severe storm detection and analysis, and also for lightning-atmosphere interaction studies. The gridded climatologies include annual mean flash rate, mean diurnal cycle of flash rate with 24 hour resolution, and mean annual cycle of flash rate with daily, monthly, or seasonal resolution. All datasets are in 0.1 degree spatial resolution. The mean annual cycle of flash rate datasets (i.e., daily, monthly or seasonal) have both 49-day and 1 degree boxcar moving averages to remove diurnal cycle and smooth regions with low flash rate, making the results more robust.++References: lisvhrac [doi:10.5067/LIS/LIS/DATA304](https://doi.org/10.5067/LIS/LIS/DATA304)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Full_Climatology_LIS_Mean_Flash_Rate.md b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Full_Climatology_LIS_Mean_Flash_Rate.mdindex 8b1378917..850a2870c 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Full_Climatology_LIS_Mean_Flash_Rate.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Full_Climatology_LIS_Mean_Flash_Rate.md@@ -1 +1,3 @@+The Climatology Mean Lightning Flash Rate layer is created from the LIS 0.1 Degree Very High Resolution Gridded Lightning Full Climatology (VHRFC) dataset consists of gridded full climatologies of total lightning flash rates seen by the Lightning Imaging Sensor (LIS) from January 1, 1998 through December 31, 2013. The Flash Rate is reported in flashes/km<sup>2</sup>/year. LIS is an instrument on the Tropical Rainfall Measurement Mission satellite (TRMM) used to detect the distribution and variability of total lightning occurring in the Earth's tropical and subtropical regions. This information can be used for severe storm detection and analysis, and also for lightning-atmosphere interaction studies. The gridded climatologies include annual mean flash rate, mean diurnal cycle of flash rate with 24 hour resolution, and mean annual cycle of flash rate with daily, monthly, or seasonal resolution. All datasets are in 0.1 degree spatial resolution. The mean annual cycle of flash rate datasets (i.e., daily, monthly or seasonal) have both 49-day and 1 degree boxcar moving averages to remove diurnal cycle and smooth regions with low flash rate, making the results more robust.+References: lisvhrfc [doi:10.5067/LIS/LIS/DATA301](https://doi.org/10.5067/LIS/LIS/DATA301)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Monthly_Climatology_LIS_Mean_Flash_Rate.md b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Monthly_Climatology_LIS_Mean_Flash_Rate.mdindex 8b1378917..4433b892f 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Monthly_Climatology_LIS_Mean_Flash_Rate.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Monthly_Climatology_LIS_Mean_Flash_Rate.md@@ -1 +1,3 @@+The Monthly Mean Lightning Flash Rate layer is created from the LIS 0.1 Degree Very High Resolution Gridded Lightning Monthly Climatology (VHRMC) dataset consists of gridded monthly climatologies of total lightning flash rates seen by the Lightning Imaging Sensor (LIS) from January 1, 1998 through December 31, 2013. The Flash Rate is reported in flashes/km<sup>2</sup>/day. LIS is an instrument on the Tropical Rainfall Measurement Mission satellite (TRMM) used to detect the distribution and variability of total lightning occurring in the Earth's tropical and subtropical regions. This information can be used for severe storm detection and analysis, and also for lightning-atmosphere interaction studies. The gridded climatologies include annual mean flash rate, mean diurnal cycle of flash rate with 24 hour resolution, and mean annual cycle of flash rate with daily, monthly, or seasonal resolution. All datasets are in 0.1 degree spatial resolution. The mean annual cycle of flash rate datasets (i.e., daily, monthly or seasonal) have both 49-day and 1 degree boxcar moving averages to remove diurnal cycle and smooth regions with low flash rate, making the results more robust.+References: lisvhrmc [doi:10.5067/LIS/LIS/DATA302]{https://doi.org/10.5067/LIS/LIS/DATA302}\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate.md b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate.mdindex 8b1378917..cee0fd0e9 100644--- a/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate.md+++ b/config/default/common/config/metadata/layers/trmm/LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate.md@@ -1 +1,3 @@+The Seasonal Mean Lightning Flash Rate layer is created from the LIS 0.1 Degree Very High Resolution Gridded Lightning Seasonal Climatology (VHRSC) dataset consists of gridded seasonal climatologies of total lightning flash rates seen by the Lightning Imaging Sensor (LIS) from January 1, 1998 through December 31, 2013. The Flash Rate is reported in flashes/km<sup>2</sup>/day. LIS is an instrument on the Tropical Rainfall Measurement Mission satellite (TRMM) used to detect the distribution and variability of total lightning occurring in the Earth's tropical and subtropical regions. This information can be used for severe storm detection and analysis, and also for lightning-atmosphere interaction studies. The gridded climatologies include annual mean flash rate, mean diurnal cycle of flash rate with 24 hour resolution, and mean annual cycle of flash rate with daily, monthly, or seasonal resolution. All datasets are in 0.1 degree spatial resolution. The mean annual cycle of flash rate datasets (i.e., daily, monthly or seasonal) have both 49-day and 1 degree boxcar moving averages to remove diurnal cycle and smooth regions with low flash rate, making the results more robust.+References: lisvhrsc [doi:10.5067/LIS/LIS/DATA305](https://doi.org/10.5067/LIS/LIS/DATA305)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/trmm/LightningFlashes&Rate.md b/config/default/common/config/metadata/layers/trmm/LightningFlashes&Rate.mddeleted file mode 100644index 2570801b4..000000000--- a/config/default/common/config/metadata/layers/trmm/LightningFlashes&Rate.md+++ /dev/null@@ -1,41 +0,0 @@-### Lightning Flashes (Raw)-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The TRMM/LIS Lightning Flashes (Raw) layer indicates the average number of total raw lightning flashes from 4 May 1995 to 31 December 2013. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite.--The LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.--### Lightning Flashes (Scaled)-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The TRMM/LIS Lightning Flashes (Scaled) layer indicates the average number of totals scaled lightning flashes from 4 May 1995 to 31 December 2013. The scaled flashes are the raw lightning flashes that have been scaled by detection efficiency values of the instruments, which varies throughout the day since lightning is easier to detect at night than during the day. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite, and then were scaled to be more regional measurements.--The LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.--### Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--The TRMM/LIS Lightning Flash Rate layer indicates the average lightning flash rate over an area in number of flashes per square kilometers per year (Flashes/km<sup>2</sup>/year) from 4 May 1995 to 31 December 2013. The imagery resolution is 3 to 6 kilometers and is available as a single layer for viewing in Worldview/Global Imagery Browse Services (GIBS). This layer was constructed through the detection of total lightning occurring in the Earth’s tropical and subtropical regions by the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite, and then calculated the frequency of each lightning flash.--The LIS instrument contains a staring imager which is optimized to locate and detect lightning with storm-scale resolution of 3 to 6 kilometers over a large region of the Earth’s surface. The field-of-view is sufficient to observe a point on the Earth or a cloud for about 80 seconds, adequate to estimate the flashing rate of many storms. The instrument records the time of occurrence of a lightning event and estimates the location.--### Daily Mean Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 (Daily)--### Climatology Mean Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 composite--### Monthly Mean Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 (Monthly)--### Seasonal Mean Lightning Flash Rate-Temporal Coverage: 4 May 1995 - 31 December 2013 (Seasonal/3 Month)--References: [GHRC: LIS/OTD 2.5 Degree Low Resolution Full Climatology (LRFC)](https://doi.org/10.5067/LIS/LIS-OTD/DATA308);-[GHRC: Lighting Imaging Sensor (LIS) Overview](https://lightning.nsstc.nasa.gov/lis/overview_lis_instrument.html);-[Albrecht, R.I., et al. The 13 years of TRMM Lightning Imaging Sensor: From individual flash characteristics to decadal tendencies. XIV International Conference on Atmospheric Electricity, August 8-12 2011, Rio de Janeiro, Brazil](https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20110015779.pdf);-[Products in LIS-OTD gridded climatology files](https://ghrc.nsstc.nasa.gov/pub/doc/lis_climatology/LISOTD_Climo_prod_table.doc);-[Cecil, D.J., et al. Gridded lightning climatology from TRMM-LIS and OTD: Dataset description, Atmospheric Research, Volumes 135–136, January 2014, Pages 404–414](https://doi.org/10.1016/j.atmosres.2012.06.028)--### Flash Radiance (Level 2, Standard)-Temporal coverage: 1 January 1998 - 8 April 2015diff --git a/config/default/common/config/wv.json/measurements/Corrected Reflectance.json b/config/default/common/config/wv.json/measurements/Corrected Reflectance.jsonindex 4ef0cd292..fea8fa76c 100644--- a/config/default/common/config/wv.json/measurements/Corrected Reflectance.json+++ b/config/default/common/config/wv.json/measurements/Corrected Reflectance.json@@ -19,7 +19,7 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/CorrectedReflectance",+ "description": "modis/terra/CorrectedReflectance","image": "","settings": ["MODIS_Terra_CorrectedReflectance_TrueColor",diff --git a/config/default/common/config/wv.json/measurements/Featured - Land Surface Reflectance.json b/config/default/common/config/wv.json/measurements/Featured - Land Surface Reflectance.jsonindex e5243429f..fbb3c9fa6 100644--- a/config/default/common/config/wv.json/measurements/Featured - Land Surface Reflectance.json+++ b/config/default/common/config/wv.json/measurements/Featured - Land Surface Reflectance.json@@ -8,7 +8,7 @@"HLS-Sentinel2": {"id": "HLS: Sentinel-2","title": "HLS: Sentinel-2A & 2B/MSI",- "description": "multi-mission/hls/ReflectanceSentinel2",+ "description": "multi-mission/hls/Reflectance","image": "","settings": ["HLS_S30_Nadir_BRDF_Adjusted_Reflectance",@@ -20,7 +20,7 @@"HLS-Landsat8": {"id": "HLS: Landsat 8","title": "HLS: Landsat 8/OLI",- "description": "multi-mission/hls/ReflectanceLandsat",+ "description": "multi-mission/hls/Reflectance","image": "","settings": ["HLS_L30_Nadir_BRDF_Adjusted_Reflectance",diff --git a/config/default/common/config/wv.json/measurements/Featured - Sea Surface Temperature.json b/config/default/common/config/wv.json/measurements/Featured - Sea Surface Temperature.jsonindex 6d4068626..5c49c4b37 100644--- a/config/default/common/config/wv.json/measurements/Featured - Sea Surface Temperature.json+++ b/config/default/common/config/wv.json/measurements/Featured - Sea Surface Temperature.json@@ -8,7 +8,7 @@"Multi-mission/GHRSST": {"id": "multi-mission-ghrsst","title": "Multi-mission/GHRSST",- "description": "multi-mission/ghrsst/SeaSurfaceTemperature",+ "description": "multi-mission/ghrsst/GHRSST","image": "","settings": ["GHRSST_L4_MUR_Sea_Surface_Temperature",@@ -18,7 +18,7 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/terra/SeaSurfaceTemperature",+ "description": "","image": "","settings": ["MODIS_Terra_L2_Sea_Surface_Temp_Day",@@ -30,11 +30,11 @@"Aqua/MODIS": {"id": "aqua-modis","title": "Aqua/MODIS",- "description": "modis/aqua/SeaSurfaceTemperature",+ "description": "","image": "","settings": ["MODIS_Aqua_L2_Sea_Surface_Temp_Day",- "MODIS_Aqua_L2_Sea_Surface_Temp_Night",+ "MODIS_Aqua_L2_Sea_Surface_Temp_Night","OrbitTracks_Aqua_Ascending","OrbitTracks_Aqua_Descending"]@@ -42,7 +42,7 @@"Suomi NPP/VIIRS": {"id": "suomi-npp-viirs","title": "Suomi NPP/VIIRS",- "description": "viirs/SeaSurfaceTemperature",+ "description": "","image": "","settings": ["VIIRS_SNPP_L2_Sea_Surface_Temp_Day",diff --git a/config/default/common/config/wv.json/measurements/Land Surface Reflectance.json b/config/default/common/config/wv.json/measurements/Land Surface Reflectance.jsonindex 52dc8cfe5..d8cb2e463 100644--- a/config/default/common/config/wv.json/measurements/Land Surface Reflectance.json+++ b/config/default/common/config/wv.json/measurements/Land Surface Reflectance.json@@ -24,7 +24,7 @@"Terra/MODIS": {"id": "terra-modis","title": "Terra/MODIS",- "description": "modis/LandSurfaceReflectance",+ "description": "modis/terra/LandSurfaceReflectance","image": "","settings": ["MODIS_Terra_SurfaceReflectance_Bands143",@@ -50,7 +50,7 @@"Terra/MISR": {"id": "terra-misr","title": "Terra/MISR",- "description": "misr/DHRReflectance",+ "description": "","image": "","settings": ["MISR_Directional_Hemispherical_Reflectance_Average_Natural_Color_Monthly"@@ -59,7 +59,7 @@"HLS-Sentinel2": {"id": "HLS: Sentinel-2","title": "HLS: Sentinel-2A & 2B/MSI",- "description": "multi-mission/hls/ReflectanceSentinel2",+ "description": "multi-mission/hls/Reflectance","image": "","settings": ["HLS_S30_Nadir_BRDF_Adjusted_Reflectance",@@ -71,7 +71,7 @@"HLS-Landsat8": {"id": "HLS: Landsat 8","title": "HLS: Landsat 8/OLI",- "description": "multi-mission/hls/ReflectanceLandsat",+ "description": "multi-mission/hls/Reflectance","image": "","settings": ["HLS_L30_Nadir_BRDF_Adjusted_Reflectance",diff --git a/config/default/common/config/wv.json/measurements/Land Surface Temperature.json b/config/default/common/config/wv.json/measurements/Land Surface Temperature.jsonindex 3463369c2..b8aadb749 100644--- a/config/default/common/config/wv.json/measurements/Land Surface Temperature.json+++ b/config/default/common/config/wv.json/measurements/Land Surface Temperature.json@@ -13,8 +13,6 @@"settings": ["MODIS_Aqua_Land_Surface_Temp_Day","MODIS_Aqua_Land_Surface_Temp_Night",- "MODIS_Aqua_Land_Surface_Temp_Day_TES",- "MODIS_Aqua_Land_Surface_Temp_Night_TES","MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day","MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night","MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day",@@ -44,8 +42,6 @@"settings": ["MODIS_Terra_Land_Surface_Temp_Day","MODIS_Terra_Land_Surface_Temp_Night",- "MODIS_Terra_Land_Surface_Temp_Day_TES",- "MODIS_Terra_Land_Surface_Temp_Night_TES","MODIS_Terra_L3_Land_Surface_Temp_Daily_Day","MODIS_Terra_L3_Land_Surface_Temp_Daily_Night","MODIS_Terra_L3_Land_Surface_Temp_8Day_Day",diff --git a/config/default/common/config/wv.json/measurements/Lightning.json b/config/default/common/config/wv.json/measurements/Lightning.jsonindex 4977644d4..ed9cf3032 100644--- a/config/default/common/config/wv.json/measurements/Lightning.json+++ b/config/default/common/config/wv.json/measurements/Lightning.json@@ -12,29 +12,32 @@"image": "","settings": ["LIS_ISS_Flash_Count",- "LIS_ISS_Flash_Radiance"+ "LIS_ISS_Flash_Radiance",+ "OrbitTracks_ISS_Descending",+ "OrbitTracks_ISS_Ascending"]},"TRMM/LIS": {"id": "trmm-lis","title": "TRMM/LIS",- "description": "trmm/LightningFlashes&Rate",+ "description": "","image": "","settings": [+ "LIS_TRMM_Flash_Radiance","LIS_High_Resolution_Full_Climatology_LIS_Raw_Flashes","LIS_High_Resolution_Full_Climatology_LIS_Scaled_Flashes","LIS_High_Resolution_Full_Climatology_LIS_Flash_Rate_Climatology","LIS_Very_High_Resolution_Lightning_Daily_Climatology_LIS_Mean_Flash_Rate","LIS_Very_High_Resolution_Lightning_Full_Climatology_LIS_Mean_Flash_Rate","LIS_Very_High_Resolution_Lightning_Monthly_Climatology_LIS_Mean_Flash_Rate",- "LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate",- "LIS_TRMM_Flash_Radiance"+ "LIS_Very_High_Resolution_Lightning_Seasonal_Climatology_LIS_Mean_Flash_Rate"+]},"OrbView-1/OTD": {"id": "orbview-otd","title": "OrbView-1/OTD",- "description": "orbview/LightningFlashes&Rate",+ "description": "","image": "","settings": ["OTD_High_Resolution_Full_Climatology_OTD_Raw_Flashes",@@ -46,7 +49,7 @@"TRMM/LIS & OrbView-1/OTD": {"id": "trmm-lis&orbview-otd","title": "TRMM/LIS & OrbView-1/OTD",- "description": "multi-mission/LightningFlashRate",+ "description": "","image": "","settings": ["LIS_High_Resolution_Full_Climatology_Combined_Flash_Rate_Climatology"@@ -55,7 +58,7 @@"DMSP-F10/OLS": {"id": "dmsp-f10-ols","title": "DMSP-F10/OLS",- "description": "ols/OLS_DMSP_F10_Digital_Derived_Lightning",+ "description": "","image": "","settings": ["OLS_DMSP_F10_Digital_Derived_Lightning"@@ -64,7 +67,7 @@"DMSP-F12/OLS": {"id": "dmsp-f12-ols","title": "DMSP-F12/OLS",- "description": "ols/OLS_DMSP_F12_Digital_Derived_Lightning",+ "description": "","image": "","settings": ["OLS_DMSP_F12_Digital_Derived_Lightning"diff --git a/config/default/common/config/wv.json/measurements/Ozone.json b/config/default/common/config/wv.json/measurements/Ozone.jsonindex 61fb78b2e..0d6927bbe 100644--- a/config/default/common/config/wv.json/measurements/Ozone.json+++ b/config/default/common/config/wv.json/measurements/Ozone.json@@ -20,7 +20,7 @@"Aura/OMI": {"id": "aura-omi","title": "Aura/OMI",- "description": "omi/Ozone",+ "description": "","image": "","settings": ["OMI_Ozone_DOAS_Total_Column",@@ -34,13 +34,14 @@"description": "omps/Ozone","image": "","settings": [- "OMPS_Ozone_Total_Column"+ "OMPS_Ozone_Total_Column",+ "OrbitTracks_Suomi_NPP_Ascending"]},"MERRA-2": {"id": "merra2","title": "MERRA-2",- "description": "merra/Ozone",+ "description": "","image": "","settings": ["MERRA2_Ozone_Mixing_Ratio_50hPa_Monthly"