Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

updated more metadata

minniewong5a5966a3b3db
diff --git a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Index.md b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Index.md
index 3e5be8b66..34d5e29ad 100644
--- a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Index.md
+++ b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Index.md
@@ -1,5 +1 @@
-The ASTER Global Digital Elevation Model (GDEM) Color Index layer shows land elevation around the world, measured in meters. On the default palette, white indicates the highest elevations, then brown, yellow and greens indicate low elevations.
-
-The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
-
-References: [LP DAAC - Routine ASTER Global Digital Elevation Model](https://lpdaac.usgs.gov/products/astgtmv002/)
+The ASTER Global Digital Elevation Model (GDEM) Color Index layer shows land elevation around the world, measured in meters. On the default palette, white indicates the highest elevations, then brown, yellow and greens indicate low elevations.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Shaded_Relief.md b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Shaded_Relief.md
index 9c064c258..b9ebd5613 100644
--- a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Shaded_Relief.md
+++ b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Color_Shaded_Relief.md
@@ -1,5 +1 @@
The ASTER Global Digital Elevation Model (GDEM) Color Shaded Relief layer shows surface elevation as shaded relief in color. Features such as mountains, valleys, plateaus and canyons with steep slopes will appear more rough, while flat areas will appear more smooth. Areas of lower elevation appear darker green, and areas of higher elevation are reds to white. Areas below sea level are a flat grey.
-
-The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
-
-References: [LP DAAC - Routine ASTER Global Digital Elevation Model](https://lpdaac.usgs.gov/products/astgtmv002/)
diff --git a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Greyscale_Shaded_Relief.md b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Greyscale_Shaded_Relief.md
index 134b4ad62..ddd496e4c 100644
--- a/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Greyscale_Shaded_Relief.md
+++ b/config/default/common/config/metadata/layers/aster/ASTER_GDEM_Greyscale_Shaded_Relief.md
@@ -1,5 +1 @@
The ASTER Global Digital Elevation Model (GDEM) Greyscale Shaded Relief layer shows surface elevation as shaded relief in shades of grey. Features such as mountains, valleys, plateaus and canyons with steep slopes will appear more rough, while flat areas will appear more smooth.
-
-The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
-
-References: [LP DAAC - Routine ASTER Global Digital Elevation Model](https://lpdaac.usgs.gov/products/astgtmv002/)
diff --git a/config/default/common/config/metadata/layers/aster/GDEM.md b/config/default/common/config/metadata/layers/aster/GDEM.md
index 27825646e..1faa0898e 100644
--- a/config/default/common/config/metadata/layers/aster/GDEM.md
+++ b/config/default/common/config/metadata/layers/aster/GDEM.md
@@ -1,16 +1,3 @@
-### ASTER Global Digital Elevation Model (GDEM) Color Index
-The ASTER Global Digital Elevation Model (GDEM) Color Index layer shows land elevation around the world, measured in meters. On the default palette, white indicates the highest elevations, then brown, yellow and greens indicate low elevations.
-
-The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
-
-### ASTER Global Digital Elevation Model (GDEM) Color Shaded Relief
-The ASTER Global Digital Elevation Model (GDEM) Color Shaded Relief layer shows surface elevation as shaded relief in color. Features such as mountains, valleys, plateaus and canyons with steep slopes will appear more rough, while flat areas will appear more smooth. Areas of lower elevation appear darker green, and areas of higher elevation are reds to white. Areas below sea level are a flat grey.
-
-The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
-
-### ASTER Global Digital Elevation Model (GDEM) Greyscale Shaded Relief
-The ASTER Global Digital Elevation Model (GDEM) Greyscale Shaded Relief layer shows surface elevation as shaded relief in shades of grey. Features such as mountains, valleys, plateaus and canyons with steep slopes will appear more rough, while flat areas will appear more smooth.
-
The Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) instrument is on board the Terra satellite. The ASTER GDEM (version 2) is a static product. It was created from approximately 1.5 million scenes (ASTER stereo pair observations) dating back to 2000 and covers land surfaces between 83°N and 83°S. ASTER GDEM data have a resolution of 30 meters.
References: [LP DAAC - Routine ASTER Global Digital Elevation Model](https://lpdaac.usgs.gov/products/astgtmv002/)
diff --git a/config/default/common/config/metadata/layers/goes/goes-east.md b/config/default/common/config/metadata/layers/goes/goes-east.md
deleted file mode 100644
index 213949b99..000000000
--- a/config/default/common/config/metadata/layers/goes/goes-east.md
+++ /dev/null
@@ -1,37 +0,0 @@
-### GeoColor (True Color (Day), Multispectral IR (Night))
-Temporal coverage: Last 90 days (Generally available for the **most recent 90 days**, though certain historical ranges are also preserved.)
-
-The GeoColor (True Color (Day), Multispectral blended infrared (IR; at Night)) layer from the GOES-East Advanced Baseline Imager (ABI) provides an approximation to daytime True Color imagery. The combination of spectral bands yields an appearance similar to what the human eye would perceive for land surface, oceanic and atmospheric features, with atmospheric correction used to make the appearance of these features sharper. Thus it is used primarily for the intuitive interpretation of meteorological and surface-based features such as smoke, blowing dust, and vegetation types (forests, deserts, croplands, etc.). At night, the true color imagery gives way to IR-based blended multispectral imagery that provides differentiation between low liquid water clouds (shown in light-blue) and higher ice clouds (shown in gray/white). It also includes a static city lights/night lights database derived from the VIIRS Day/Night Band, which aids in geo-referencing and can help determine the proximity of clouds (such as fog) or weather hazards (such as thunderstorms or tropical cyclones) to population centers. Please note that as these lights are static, they will not change even if, for example, a weather-induced power outage occurs.
-
-The Geostationary Operational Environmental Satellites (GOES)-East satellite (currently, GOES-16) is centered on 75.2 degrees W, covering the Conterminous US, Canada, Central and South America. The GOES-East ABI imagery is available on a rolling 90-day basis at 10 minute intervals. The product resolution is 1 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 1 km and the temporal resolution is 10 minutes.
-
-GeoColor Imagery provided by [NOAA/NESDIS/STAR](https://www.star.nesdis.noaa.gov/goes/).
-
-References: [GeoColor Product Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/QuickGuide_CIRA_Geocolor_20171019.pdf); Miller, Steven D., Daniel T. Lindsey, Curtis J. Seaman, and Jeremy E. Solbrig. " GeoColor: A Blending Technique for Satellite Imagery", Journal of Atmospheric and Oceanic Technology 37, 3 (2020): 429-448, [doi:10.1175/JTECH-D-19-0134.1](https://doi.org/10.1175/JTECH-D-19-0134.1)
-
-### Red Visible (0.64 µm, Band 2, 10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Red Visible (0.64 um, Band 2) layer from the GOES-East Advanced Baseline Imager (ABI) is used primarily to monitor the evolution of clouds throughout the daylight hours. It is also useful for identifying small-scale features such as river fog/clear air boundaries, or overshooting tops of cumulus clouds. It can also be used to identify daytime snow and ice cover, diagnose low-level cloud-drift winds, assist with detections of volcanic ash and analysis of hurricanes and winter storms.
-
-The Geostationary Operational Environmental Satellites (GOES)-East satellite (currently, GOES-16) is centered on 75.2 degrees W, covering the Conterminous US, Canada, Central and South America. The GOES-East ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution of Band 2 is 0.5 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 1 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 2 (0.64 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band02.pdf)
-
-### Clean Infrared (10.3 µm, Band 13, 10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Clean Infrared (10.3 um, Band 13) layer from the GOES-East Advanced Baseline Imager (ABI) is useful for detecting clouds all times of day and night and is quite useful in retrievals of cloud top height. It is used to identify and classify cloud and other atmospheric features, estimate cloud-top brightness temperature and cloud particle size, convective severe weather signatures, and hurricane intensity. This infrared window is not strongly affected by atmospheric water vapor.
-
-The Geostationary Operational Environmental Satellites (GOES)-East satellite (currently, GOES-16) is centered on 75.2 degrees W, covering the Conterminous US, Canada, Central and South America. The GOES-East ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution of Band 13 is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 13 (10.3 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band13.pdf)
-
-### Air Mass (10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Air Mass layer from the GOES-East Advanced Baseline Imager (ABI) is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. The RGB image is comprised of Bands 6.2-7.3, 9.6-10.4 and 6.2.
-
-The Geostationary Operational Environmental Satellites (GOES)-East satellite (currently, GOES-16) is centered on 75.2 degrees W, covering the Conterminous US, Canada, Central and South America. The GOES-East ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)
diff --git a/config/default/common/config/metadata/layers/goes/goes-west.md b/config/default/common/config/metadata/layers/goes/goes-west.md
deleted file mode 100644
index 26a28c44a..000000000
--- a/config/default/common/config/metadata/layers/goes/goes-west.md
+++ /dev/null
@@ -1,37 +0,0 @@
-### GeoColor (True Color (Day), Multispectral IR (Night))
-Temporal coverage: Last 90 days (Generally available for the **most recent 90 days**, though certain historical ranges are also preserved.)
-
-The GeoColor (True Color (Day), Multispectral blended infrared (IR; at Night)) layer from the GOES-West Advanced Baseline Imager (ABI) provides an approximation to daytime True Color imagery. The combination of spectral bands yields an appearance similar to what the human eye would perceive for land surface, oceanic and atmospheric features, with atmospheric correction used to make the appearance of these features sharper. Thus it is used primarily for the intuitive interpretation of meteorological and surface-based features such as smoke, blowing dust, and vegetation types (forests, deserts, croplands, etc.). At night, the true color imagery gives way to IR-based blended multispectral imagery that provides differentiation between low liquid water clouds (shown in light-blue) and higher ice clouds (shown in gray/white). It also includes a static city lights/night lights database derived from the VIIRS Day/Night Band, which aids in geo-referencing and can help determine the proximity of clouds (such as fog) or weather hazards (such as thunderstorms or tropical cyclones) to population centers. Please note that as these lights are static, they will not change even if, for example, a weather-induced power outage occurs.
-
-The Geostationary Operational Environmental Satellites (GOES)-West satellite (currently, GOES-17) is centered on 137.2 degrees W, covering most of the Pacific Ocean, the USA, most of Canada, Central, the western half of South America, parts of Australasia. The GOES-West ABI imagery is available on a rolling 90-day basis at 10 minute intervals. The product resolution is 1 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 1 km and the temporal resolution is 10 minutes.
-
-GeoColor Imagery provided by [NOAA/NESDIS/STAR](https://www.star.nesdis.noaa.gov/goes/).
-
-References: [GeoColor Product Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/QuickGuide_CIRA_Geocolor_20171019.pdf); Miller, Steven D., Daniel T. Lindsey, Curtis J. Seaman, and Jeremy E. Solbrig. " GeoColor: A Blending Technique for Satellite Imagery", Journal of Atmospheric and Oceanic Technology 37, 3 (2020): 429-448, [doi:10.1175/JTECH-D-19-0134.1](https://doi.org/10.1175/JTECH-D-19-0134.1)
-
-### Red Visible (0.64 µm, Band 2, 10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Red Visible (0.64 um, Band 2) layer from the GOES-West Advanced Baseline Imager (ABI) is used primarily to monitor the evolution of clouds throughout the daylight hours. It is also useful for identifying small-scale features such as river fog/clear air boundaries, or overshooting tops of cumulus clouds. It can also be used to identify daytime snow and ice cover, diagnose low-level cloud-drift winds, assist with detections of volcanic ash and analysis of hurricanes and winter storms.
-
-The Geostationary Operational Environmental Satellites (GOES)-West satellite (currently, GOES-17) is centered on 137.2 degrees W, covering most of the Pacific Ocean, the USA, most of Canada, Central, the western half of South America, parts of Australasia. The GOES-West ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution of Band 2 is 0.5 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 1 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 2 (0.64 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band02.pdf)
-
-### Clean Infrared (10.3 µm, Band 13, 10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Clean Infrared (10.3 um, Band 13) layer from the GOES-West Advanced Baseline Imager (ABI) is useful for detecting clouds all times of day and night and is quite useful in retrievals of cloud top height. It is used to identify and classify cloud and other atmospheric features, estimate cloud-top brightness temperature and cloud particle size, convective severe weather signatures, and hurricane intensity. This infrared window is not strongly affected by atmospheric water vapor.
-
-The Geostationary Operational Environmental Satellites (GOES)-West satellite (currently, GOES-17) is centered on 137.2 degrees W, covering most of the Pacific Ocean, the USA, most of Canada, Central, the western half of South America, parts of Australasia. The GOES-West ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution of Band 13 is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 13 (10.3 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band13.pdf)
-
-### Air Mass (10 minute)
-Temporal coverage: Last 30 days (Generally available for the **most recent 30 days**, though certain historical ranges are also preserved.)
-
-The Air Mass layer from the GOES-West Advanced Baseline Imager (ABI) is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. The RGB image is comprised of Bands 6.2-7.3, 9.6-10.4 and 6.2.
-
-The Geostationary Operational Environmental Satellites (GOES)-West satellite (currently, GOES-17) is centered on 137.2 degrees W, covering most of the Pacific Ocean, the USA, most of Canada, Central, the western half of South America, parts of Australasia. The GOES-West ABI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)
diff --git a/config/default/common/config/metadata/layers/himawari/himawari-8.md b/config/default/common/config/metadata/layers/himawari/himawari-8.md
deleted file mode 100644
index b9f1e6437..000000000
--- a/config/default/common/config/metadata/layers/himawari/himawari-8.md
+++ /dev/null
@@ -1,29 +0,0 @@
-Note: These layers are generally available for the **most recent 30 days**, though certain historical ranges are also preserved.
-
-### Red Visible (0.64 um, Band 3, 10 minute)
-Temporal coverage: Last 30 days
-
-The Red Visible (0.64 um, Band 3) layer from the Advanced Himawari Imager (AHI) is used primarily to monitor the evolution of clouds throughout the daylight hours. It is also useful for identifying small-scale features such as river fog/clear air boundaries, or overshooting tops of cumulus clouds. It can also be used to identify daytime snow and ice cover, diagnose low-level cloud-drift winds, assist with detections of volcanic ash and analysis of hurricanes and winter storms.
-
-The Himawari-8 satellite is centered on 140.7 degrees E, covering most of the Pacific Ocean, a portion of Eastern Asia, and parts of Australasia. The Himawari-8 AHI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution is 0.5 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 1 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 13 (10.3 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band13.pdf)
-
-### Clean Infrared (10.3 um, Band 13, 10 minute)
-Temporal coverage: Last 30 days
-
-The Clean Infrared (10.3 um, Band 13) layer from the Advanced Himawari Imager (AHI) is useful for detecting clouds all times of day and night and is quite useful in retrievals of cloud top height. It is used to identify and classify cloud and other atmospheric features, estimate cloud-top brightness temperature and cloud particle size, convective severe weather signatures, and hurricane intensity. This infrared window is not strongly affected by atmospheric water vapor.
-
-The Himawari-8 satellite is centered on 140.7 degrees E, covering most of the Pacific Ocean, a portion of Eastern Asia, and parts of Australasia. The Himawari-8 AHI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: ABI Band 13 (10.3 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band13.pdf)
-
-
-### Air Mass (10 minute)
-Temporal coverage: Last 30 days
-
-The Air Mass layer from the Himawari-8 Advanced Himawari Imager (AHI) is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. The RGB image is comprised of Bands 6.2-7.3, 9.6-10.4 and 6.2.
-
-The Himawari-8 satellite is centered on 140.7 degrees E, covering most of the Pacific Ocean, a portion of Eastern Asia, and parts of Australasia. The Himawari-8 AHI imagery is available on a rolling monthly basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km and the temporal resolution is 10 minutes.
-
-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)
diff --git a/config/default/common/config/metadata/layers/modis/SnowExtent.md b/config/default/common/config/metadata/layers/modis/SnowExtent.md
index b4e6f5e38..d86221a8c 100644
--- a/config/default/common/config/metadata/layers/modis/SnowExtent.md
+++ b/config/default/common/config/metadata/layers/modis/SnowExtent.md
@@ -1,12 +1 @@
-### MODIS (Terra/Aqua) Snow Extent (Level 3, 8-Day)
-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)
-
-The MODIS/Terra | MODIS/Aqua Snow Extent (L3, 8-Day) layers show the maximum snow cover extent, observed over an eight-day period, provided in 10 degree x 10 degree tiles. Tiles are generated by compositing 500 m observations from the MODIS/Terra | MODIS/Aqua Snow Cover Daily L3 Global 500 m SIN Grid (MOD10A1 | MYD10A1) data set. Snow cover is detected using the Normalized Difference Snow Index (NDSI) snow cover algorithm and shows the presence of snow during day time and under cloud free condition only.
-
-The Moderate Resolution Imaging Spectroradiometer (MODIS) is a 36-band visible to thermal-infrared sensor onboard the Terra and Aqua satellites. Two of the bands are imaged at a nominal resolution of 250 m at nadir, five bands at 500 m, and the remaining bands at 1000 m.
-
-Seasonal snow cover is an important part of Earth’s climate system. It helps regulate the Earth’s surface temperature and is crucial for predicting snow and flooding.
-
-References: MOD10A2 [doi:10.5067/MODIS/MOD10A2.061](https://doi.org/10.5067/MODIS/MOD10A2.061); MYD10A2 [doi:10.5067/MODIS/MYD10A2.061](https://doi.org/10.5067/MODIS/MYD10A2.061)
-
NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Snow_Extent_8Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Snow_Extent_8Day.md
index 5243a3b97..9cfaf946b 100644
--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Snow_Extent_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Snow_Extent_8Day.md
@@ -2,8 +2,6 @@ The MODIS/Aqua Snow Extent (L3, 8-Day) Layer shows the maximum snow cover extent
Seasonal snow cover is an important part of Earth’s climate system. It helps regulate the Earth’s surface temperature and is crucial for predicting snow and flooding.
-The Moderate Resolution Imaging Spectroradiometer (MODIS) is a 36-band visible to thermal-infrared sensor onboard the Terra and Aqua satellites. Two of the bands are imaged at a nominal resolution of 250 m at nadir, five bands at 500 m, and the remaining bands at 1000 m.
-
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
+The Moderate Resolution Imaging Spectroradiometer (MODIS) is a 36-band visible to thermal-infrared sensor onboard the Terra and Aqua satellites. Two of the bands are imaged at a nominal resolution of 250 m at nadir, five bands at 500 m, and the remaining bands at 1000
References: MYD10A2 [doi:10.5067/MODIS/MYD10A2.061](https://doi.org/10.5067/MODIS/MYD10A2.061)
diff --git a/config/default/common/config/metadata/layers/modis/combined/Flood.md b/config/default/common/config/metadata/layers/modis/combined/Flood.md
deleted file mode 100644
index 7f587b479..000000000
--- a/config/default/common/config/metadata/layers/modis/combined/Flood.md
+++ /dev/null
@@ -1,27 +0,0 @@
-### MODIS (Terra and Aqua) Flood (2-Day, 3-Day)
-Temporal coverage: 1 January 2021 - present
-
-The MODIS Near Real-Time (NRT) Global Flood (MCDWD) Product provides a daily global map of flooding. It is derived from the NRT MODIS Surface Reflectance (MOD09) datasets from both the Terra and Aqua satellites. The Flood Product is available for 3 compositing periods: 1-day, 2-day, and 3-day. For each composite, water detections for all observations (Terra and Aqua) over the compositing period (1, 2, or 3 days) are accumulated, and if the total exceeds the required threshold (1, 2, and 3 observations, respectively), the pixel is marked as water. (Note: 1-day product not yet available in Worldview)
-
-Users are advised to compare the flood product against the contributing MODIS reflectance imagery (such as 7-2-1 Corrected Reflectance; search for “721” after clicking “Add Layers”) , for the compositing period to ensure reported flood areas do not correspond to areas of cloud shadow. [Learn more...](https://earthdata.nasa.gov/earth-observation-data/near-real-time/mcdwd-nrt#ed-flood-faq)
-
-#### Limitations
-Common situations in which the flood product may be unable to accurately identify flood include:
-
-- Surface obscuration: clouds and canopy cover can block view of water on the surface. Buildings can also provide a “dry” roof, diluting the signal from surrounding water.
-- Cloud shadow false-positives: cloud shadows are detected as water by the algorithm; when they recur in the same location over the compositing period, false positives are likely to be reported. Longer compositing periods help minimize this. Please check reflectance imagery of dates contributing to composite to rule these out, if reported flood looks unusual or suspicious.
-- Terrain shadow false-positives: terrain shadows can create false-positives in mountains, generally only in wintertime. These are typically easy to identify due to their pattern (reflecting topography), and by comparison to reflectance imagery.
-- Dark volcanic rock or soils: such areas can be identified as water, and thus will routinely be reported as flood.
-- Springtime snow melt ponding on fields: such water can appear as pixellated flood across flat areas of agricultural fields. Although this is unusual water, it is often very shallow, and not moving, and thus typically not a flood in the normal sense. Checking the reflectance imagery will typically show such areas on the edge of larger areas of snow extent, or, looking back in time, will show them recently covered by snow.
-
-
-#### Spatial Coverage
-Non-polar global land areas (below 70 degrees latitude), comprising 223 10x10 degree tiles (see Figure 4 in [User Guide](https://earthdata.nasa.gov/files/MCDWD_UserGuide_RevB.pdf) for included tiles).
-
-#### Sensor/Image Resolution
-Nominal equatorial resolution is ~232 m per pixel, and decreasing toward the poles (~116 m at 60 degrees latitude). Note the higher apparent resolution towards the poles is simply an artifact of the lat/lon (geographic) projection used, and not intrinsic to the data.
-
-#### Frequency
-One product per day, per tile. During the day, data products are updated as NRT MOD09 data are received (an initial product may be updated if additional intersecting swath data is later received).
-
-[Dataset doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/modis/combined/IsotropicKernelParameters.md b/config/default/common/config/metadata/layers/modis/combined/IsotropicKernelParameters.md
deleted file mode 100644
index 8b17ce9f3..000000000
--- a/config/default/common/config/metadata/layers/modis/combined/IsotropicKernelParameters.md
+++ /dev/null
@@ -1,8 +0,0 @@
-### MAIAC Isotropic Kernel Parameters (RTLS Model, 8-Day)
-Temporal coverage: 22 September 2019 - present
-
-The MAIAC Isotropic Kernel Parameters (RTLS Model, 8-Day) layer is an RGB image of Multi-Angle Implementation of Atmospheric Correction (MAIAC) isotropic kernel parameter of the Ross-Thick Li-Sparse (RTLS) BRDF model over land based on MODIS bands 1, 4, 3. The bidirectional reflectance distribution function (BRDF) characterizes anisotropy of reflectance by natural land surfaces. It is widely used in the modeling and remote sensing. In collection 6, the MAIAC BRDF model is reported every 8 days for MODIS bands 1-8 at 1km resolution on global Sinusoidal projection (MCD19A3). The product is naturally gap-filled: the previous solution stays in active MAIAC memory for every 1km grid cell until updated with latest RTLS from cloud-free observations. The update day is reported in MCD19A1. When surface is covered by snow, the RTLS represents the latest retrieval prior to snowfall. The knowledge of spectral BRDF of the snow-free land surface allows MAIAC to accurately derive the sub-pixel snow fraction and snow grain size using spectral unmixing approach.
-
-The MAIAC Combined Isotropic Kernel Parameters layer is available as a combined Terra satellite and Aqua satellite layer (MCD19A3). The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is 8-day.
-
-References: [doi: 10.5067/MODIS/MCD19A3N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A3N.NRT.006)
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_1-Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_1-Day.md
index cbb283df9..e33a88aac 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_1-Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_1-Day.md
@@ -13,7 +13,6 @@ Common situations in which the flood product may be unable to accurately identif
- Dark volcanic rock or soils: such areas can be identified as water, and thus will routinely be reported as flood.
- Springtime snow melt ponding on fields: such water can appear as pixellated flood across flat areas of agricultural fields. Although this is unusual water, it is often very shallow, and not moving, and thus typically not a flood in the normal sense. Checking the reflectance imagery will typically show such areas on the edge of larger areas of snow extent, or, looking back in time, will show them recently covered by snow.
-
#### Spatial Coverage
Non-polar global land areas (below 70 degrees latitude), comprising 223 10x10 degree tiles (see Figure 4 in [User Guide](https://earthdata.nasa.gov/files/MCDWD_UserGuide_RevB.pdf) for included tiles).
@@ -23,4 +22,4 @@ Nominal equatorial resolution is ~232 m per pixel, and decreasing toward the pol
#### Frequency
One product per day, per tile. During the day, data products are updated as NRT MOD09 data are received (an initial product may be updated if additional intersecting swath data is later received).
-[Dataset doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
\ No newline at end of file
+References: MCDWD_L3_NRT [doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_2-Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_2-Day.md
index 85a317ce7..b5a8f102e 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_2-Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_2-Day.md
@@ -11,7 +11,6 @@ Common situations in which the flood product may be unable to accurately identif
- Dark volcanic rock or soils: such areas can be identified as water, and thus will routinely be reported as flood.
- Springtime snow melt ponding on fields: such water can appear as pixellated flood across flat areas of agricultural fields. Although this is unusual water, it is often very shallow, and not moving, and thus typically not a flood in the normal sense. Checking the reflectance imagery will typically show such areas on the edge of larger areas of snow extent, or, looking back in time, will show them recently covered by snow.
-
#### Spatial Coverage
Non-polar global land areas (below 70 degrees latitude), comprising 223 10x10 degree tiles (see Figure 4 in [User Guide](https://earthdata.nasa.gov/files/MCDWD_UserGuide_RevB.pdf) for included tiles).
@@ -21,4 +20,4 @@ Nominal equatorial resolution is ~232 m per pixel, and decreasing toward the pol
#### Frequency
One product per day, per tile. During the day, data products are updated as NRT MOD09 data are received (an initial product may be updated if additional intersecting swath data is later received).
-[Dataset doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
+References: MCDWD_L3_NRT [doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_3-Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_3-Day.md
index 777cc2851..e3d506f1e 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_3-Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_Flood_3-Day.md
@@ -11,7 +11,6 @@ Common situations in which the flood product may be unable to accurately identif
- Dark volcanic rock or soils: such areas can be identified as water, and thus will routinely be reported as flood.
- Springtime snow melt ponding on fields: such water can appear as pixellated flood across flat areas of agricultural fields. Although this is unusual water, it is often very shallow, and not moving, and thus typically not a flood in the normal sense. Checking the reflectance imagery will typically show such areas on the edge of larger areas of snow extent, or, looking back in time, will show them recently covered by snow.
-
#### Spatial Coverage
Non-polar global land areas (below 70 degrees latitude), comprising 223 10x10 degree tiles (see Figure 4 in [User Guide](https://earthdata.nasa.gov/files/MCDWD_UserGuide_RevB.pdf) for included tiles).
@@ -21,4 +20,4 @@ Nominal equatorial resolution is ~232 m per pixel, and decreasing toward the pol
#### Frequency
One product per day, per tile. During the day, data products are updated as NRT MOD09 data are received (an initial product may be updated if additional intersecting swath data is later received).
-[Dataset doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
\ No newline at end of file
+References: MCDWD_L3_NRT [doi:10.5067/MODIS/MCDWD_L3_NRT.061](https://doi.org/10.5067/MODIS/MCDWD_L3_NRT.061)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L3_IsotropicKernelParameters_8Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L3_IsotropicKernelParameters_8Day.md
index 98362d135..a783d09e3 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L3_IsotropicKernelParameters_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_MAIAC_L3_IsotropicKernelParameters_8Day.md
@@ -2,4 +2,4 @@ The MAIAC Isotropic Kernel Parameters (RTLS Model, 8-Day) layer is an RGB image
The MAIAC Combined Isotropic Kernel Parameters layer is available as a combined Terra satellite and Aqua satellite layer (MCD19A3). The sensor resolution is 1 km, imagery resolution is 1 km, and the temporal resolution is 8-day.
-References: [doi: 10.5067/MODIS/MCD19A3N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A3N.NRT.006)
+References: MCD19A3N [doi:10.5067/MODIS/MCD19A3N.NRT.006](https://doi.org/10.5067/MODIS/MCD19A3N.NRT.006)
diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Snow_Extent_8Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Snow_Extent_8Day.md
index 1a7da845f..5a0553beb 100644
--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Snow_Extent_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Snow_Extent_8Day.md
@@ -4,6 +4,4 @@ Seasonal snow cover is an important part of Earth’s climate system. It helps r
The Moderate Resolution Imaging Spectroradiometer (MODIS) is a 36-band visible to thermal-infrared sensor onboard the Terra and Aqua satellites. Two of the bands are imaged at a nominal resolution of 250 m at nadir, five bands at 500 m, and the remaining bands at 1000 m.
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
-
References: MOD10A2 [doi:10.5067/MODIS/MOD10A2.061](https://doi.org/10.5067/MODIS/MOD10A2.061)
diff --git a/config/default/common/config/metadata/layers/multi-mission/IceVelocityAntarctica.md b/config/default/common/config/metadata/layers/multi-mission/IceVelocityAntarctica.md
deleted file mode 100644
index 8fe0ef8c7..000000000
--- a/config/default/common/config/metadata/layers/multi-mission/IceVelocityAntarctica.md
+++ /dev/null
@@ -1,7 +0,0 @@
-This MEaSUREs Ice Velocity (Antarctica) layer provides a high-resolution digital mosaic composite of ice motion in Antarctica assembled from multiple satellite interferometric synthetic-aperture radar systems: RADARSAT-1, ERS-1 and 2, ALOS PALSAR, ENVISAT ASAR, RADARSAT-2.
-
-An ice sheet is a mass of glacial land ice extending more than 50,000 square kilometers (20,000 square miles) and forms in areas where snow that falls in winter does not melt entirely over the summer. Over thousands of years, the layers of snow pile up into thick masses of ice, growing thicker and denser as the weight of new snow and ice layers compresses the older layers. Ice sheets are constantly in motion, slowly flowing downhill under their own weight. Near the coast, most of the ice moves through relatively fast-moving outlets called ice streams, glaciers, and ice shelves. Within the image, the various colors, ranging from dark blue (0 m/y) to dark red (5600 m/y), indicate the velocity of the various ice outlets.
-
-The MEaSUREs Ice Velocity (Antarctica) layer’s sensor and imagery resolution is 450 m, and the temporal resolution is 15 years.
-
-References: [MEaSUREs InSAR-Based Antarctica Ice Velocity Map, Version 1 (NSIDC-0484)](https://nsidc.org/data/nsidc-0484/versions/1); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
diff --git a/config/default/common/config/metadata/layers/multi-mission/IceVelocityGreenland.md b/config/default/common/config/metadata/layers/multi-mission/IceVelocityGreenland.md
deleted file mode 100644
index 6d07c6094..000000000
--- a/config/default/common/config/metadata/layers/multi-mission/IceVelocityGreenland.md
+++ /dev/null
@@ -1,7 +0,0 @@
-This MEaSUREs Ice Velocity (Greenland) layer reports seasonal (winter) ice-sheet-wide velocity maps for Greenland derived from Interferometric Synthetic Aperture Radar (InSAR) data obtained by RADARSAT-1, the Advanced Land Observation Satellite (ALOS), and the TerraSAR-X satellite.
-
-An ice sheet is a mass of glacial land ice extending more than 50,000 square kilometers (20,000 square miles) and forms in areas where snow that falls in winter does not melt entirely over the summer. Over thousands of years, the layers of snow pile up into thick masses of ice, growing thicker and denser as the weight of new snow and ice layers compresses the older layers. Ice sheets are constantly in motion, slowly flowing downhill under their own weight. Near the coast, most of the ice moves through relatively fast-moving outlets called ice streams, glaciers, and ice shelves. Within the image, the various colors, ranging from dark blue (0 m/y) to dark red (1600 m/y), indicate the velocity of the various ice outlets.
-
-The MEaSUREs Ice Velocity (Greenland) layer's sensor and imagery resolution is 500 m, and the temporal resolution is 5-6 months.
-
-References: [MEaSUREs Greenland Ice Sheet Velocity Map from InSAR Data, Version 2 (NSIDC-0478)](https://nsidc.org/data/nsidc-0478); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
diff --git a/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Antarctica.md b/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Antarctica.md
index 1abb1df9c..765abeda5 100644
--- a/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Antarctica.md
+++ b/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Antarctica.md
@@ -4,4 +4,4 @@ An ice sheet is a mass of glacial land ice extending more than 50,000 square kil
The MEaSUREs Ice Velocity (Antarctica) layer’s sensor and imagery resolution is 450 m, and the temporal resolution is 15 years.
-References: [MEaSUREs InSAR-Based Antarctica Ice Velocity Map, Version 1 (NSIDC-0484)](https://nsidc.org/data/nsidc-0484/versions/1); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
+References: NSIDC-0484 [doi:10.5067/MEASURES/CRYOSPHERE/nsidc-0484.001](https://doi.org/10.5067/MEASURES/CRYOSPHERE/nsidc-0484.001); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
diff --git a/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Greenland.md b/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Greenland.md
index 69feada43..eb115db40 100644
--- a/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Greenland.md
+++ b/config/default/common/config/metadata/layers/multi-mission/merged/MEaSUREs_Ice_Velocity_Greenland.md
@@ -4,4 +4,4 @@ An ice sheet is a mass of glacial land ice extending more than 50,000 square kil
The MEaSUREs Ice Velocity (Greenland) layer's sensor and imagery resolution is 500 m, and the temporal resolution is 5-6 months.
-References: [MEaSUREs Greenland Ice Sheet Velocity Map from InSAR Data, Version 2 (NSIDC-0478)](https://nsidc.org/data/nsidc-0478); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
+References: NSIDC-0478 [doi:10.5067/OC7B04ZM9G6Q](https://doi.org/10.5067/OC7B04ZM9G6Q); [NSIDC Quick Facts on Ice Sheets](https://nsidc.org/cryosphere/quickfacts/icesheets.html)
diff --git a/config/default/common/config/metadata/layers/reference/LatLongLines.md b/config/default/common/config/metadata/layers/reference/LatLongLines.md
deleted file mode 100644
index a62a94ccc..000000000
--- a/config/default/common/config/metadata/layers/reference/LatLongLines.md
+++ /dev/null
@@ -1,3 +0,0 @@
-The Latitude-Longitude Lines layers is a vector layer displaying the grid/graticule of latitude and longitude lines over the globe.
-
-In the geographic projection, Latitude-Longitude Lines are generated from the graticule capability within [OpenLayers](https://openlayers.org/). For the Arctic and Antarctic polar stereographic projections, the graticule layers are generated from [Polarview](https://www.polarview.aq/).
diff --git a/config/default/common/config/metadata/layers/smap/HeterotrophicResipration.md b/config/default/common/config/metadata/layers/smap/HeterotrophicResipration.md
deleted file mode 100644
index 4de65c4fb..000000000
--- a/config/default/common/config/metadata/layers/smap/HeterotrophicResipration.md
+++ /dev/null
@@ -1,10 +0,0 @@
-### Heterotrophic Respiration (L4, 9 km Grid Cell Mean, Model Value-Added)
-Temporal coverage: 13 April 2015 - present
-
-The Soil Moisture Active Passive (SMAP) “Heterotrophic Respiration (L4, 9 km Grid Cell Mean, Model Value-Added)” layer displays model-derived global daily heterotrophic respiration in grams of carbon uptake per meter squared per day ( gC m<sup>-2</sup> day<sup>-1</sup>) posted on a 9 km EASE-Grid 2.0. Heterotrophic respiration is computed as the sum of variable decomposition and respiration rates from metabolic, structural, and recalcitrant Soil Organic Carbon (SOC) pools and corresponding decomposition rate parameters. The metabolic and structural SOC pools represent plant litter with relatively short (e.g., ≤ 5 years) turnover periods, while the recalcitrant pool represents more physically and chemically protected SOC with a longer turnover time.
-
-The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
-Data field: `rh_mean`
diff --git a/config/default/common/config/metadata/layers/smap/NetEcosystemCO2Exchange.md b/config/default/common/config/metadata/layers/smap/NetEcosystemCO2Exchange.md
deleted file mode 100644
index 591f3cdbd..000000000
--- a/config/default/common/config/metadata/layers/smap/NetEcosystemCO2Exchange.md
+++ /dev/null
@@ -1,21 +0,0 @@
-### Net Ecosystem CO2 Exchange (L4, 9 km Grid Cell Mean, Model Value-Added)
-Temporal coverage: 13 April 2015 - present
-
-The Soil Moisture Active Passive (SMAP) “Net Ecosystem CO2 Exchange (L4, 9 km Grid Cell Mean, Model Value-Added)” layer displays model-derived global gridded mean daily estimates of net ecosystem carbon (CO<sub>2</sub>) exchange in grams of carbon uptake per meter squared per day (gC m<sup>-2</sup> day<sup>-1</sup>) posted on a 9 km EASE-Grid 2.0. The net ecosystem exchange of CO<sub>2</sub> with the atmosphere is a fundamental measure of the balance between carbon uptake by vegetation gross primary production (GPP) and carbon losses through autotrophic (Ra) and heterotrophic (Rh) respiration. The sum of Ra and Rh defines the total ecosystem respiration rate (Rtot), which encompasses most of the annual terrestrial CO<sub>2</sub> efflux to the atmosphere.
-
-The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate. The imagery resolution is 2 km and sensor resolution is 9 km. The temporal resolution is daily and temporal availability for viewing in Worldview/Global Imagery Browse Services (GIBS) is 13 April 2015 - present.
-
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
-Data field: `nee_mean`
-
-### Net Ecosystem CO2 Exchange Uncertainty (L4, 9 km Grid Cell Mean, Model Value-Added)
-Temporal coverage: 13 April 2015 - present
-
-The Soil Moisture Active Passive (SMAP) “Net Ecosystem CO2 Exchange Uncertainty (L4, 9 km Grid Cell Mean, Model Value-Added)” layer displays uncertainty estimates of model-derived global gridded mean daily estimates of net ecosystem carbon (CO<sub>2</sub>) exchange in grams of carbon uptake per meter squared per day (gC m<sup>-2</sup> day<sup>-1</sup>) posted on a 9 km EASE-Grid 2.0. The net ecosystem exchange of CO<sub>2</sub> with the atmosphere is a fundamental measure of the balance between carbon uptake by vegetation gross primary production (GPP) and carbon losses through autotrophic (Ra) and heterotrophic (Rh) respiration. The sum of Ra and Rh defines the total ecosystem respiration rate (Rtot), which encompasses most of the annual terrestrial CO<sub>2</sub> efflux to the atmosphere.
-
-The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
-Data field: `nee_mean`
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH.md
index c934871a9..b87ef84eb 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) “Sigma0 3 km (L3, Active, HH Polarizat
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_hh_mean`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_QA.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_QA.md
index 1bf15a926..dfed67e3e 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_QA.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_QA.md
@@ -2,6 +2,8 @@ The Soil Moisture Active Passive (SMAP) "Sigma0 3 km QA (L3, Active, HH Polariza
Within the image, green indicates that Sigma0 observations have acceptable quality for science use, yellow indicates that caution should be used with the Sigma0 observations as one or more quality-impacting conditions have been identified, and red indicates that Sigma0 observations are flagged as bad due to unacceptable quality.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_qual_flag_hh`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
+
+
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_RFI.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_RFI.md
index cb2793c82..7baad6db7 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_RFI.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_HH_RFI.md
@@ -4,6 +4,8 @@ Within the image, green indicates that Sigma0 observations are free of RFI and a
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_qual_flag_hh`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
+
+
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV.md
index b3311384c..ac24ea2ea 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) "Sigma0 3 km (L3, Active, VV Polarizatio
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_vv_mean`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_QA.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_QA.md
index 870ea9704..ed0ef6ae3 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_QA.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_QA.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) "Sigma0 3 km QA (L3, Active, VV Polariza
Within the image, green indicates that Sigma0 observations have acceptable quality for science use, yellow indicates that caution should be used with the Sigma0 observations as one or more quality-impacting conditions have been identified, and red indicates that Sigma0 observations are flagged as bad due to unacceptable quality.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-`
Data field: `sigma0_qual_flag_vv`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_RFI.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_RFI.md
index 58a60c6ca..14fe22e31 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_RFI.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_VV_RFI.md
@@ -4,6 +4,6 @@ Within the image, green indicates that Sigma0 observations are free of RFI and a
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_qual_flag_vv`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL.md
index 3d924856d..628c04761 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) "Sigma0 3 km (L3, Active, XPOL Polarizat
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_xpol_mean`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_QA.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_QA.md
index b59304e47..1a9906ead 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_QA.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_QA.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) "Sigma0 3 km QA (L3, Active, XPOL Polari
Within the image, green indicates that Sigma0 observations have acceptable quality for science use, yellow indicates that caution should be used with the Sigma0 observations as one or more quality-impacting conditions have been identified, and red indicates that Sigma0 observations are flagged as bad due to unacceptable quality.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_qual_flag_xpol`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_RFI.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_RFI.md
index 3532a40ee..65fdd4854 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_RFI.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Sigma0_XPOL_RFI.md
@@ -4,6 +4,6 @@ Within the image, green indicates that Sigma0 observations are free of RFI and a
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `sigma0_qual_flag_xpol`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Soil_Moisture.md b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Soil_Moisture.md
index 640eea8b0..0b255a108 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Soil_Moisture.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L3_Active_Soil_Moisture.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) “Soil Moisture 3 km (L3, Active)” la
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
Data field: `soil_moisture`
+
+References: SPL3SMA [doi:10.5067/IGQNPB6183ZX]](https://doi.org/10.5067/IGQNPB6183ZX)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Heterotrophic_Respiration.md b/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Heterotrophic_Respiration.md
index 6b1fe6dba..419a114b3 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Heterotrophic_Respiration.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Heterotrophic_Respiration.md
@@ -2,6 +2,8 @@ The Soil Moisture Active Passive (SMAP) “Heterotrophic Respiration (L4, 9 km G
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
Data field: `rh_mean`
+
+References: SPL4CMDL [doi:10.5067/9IKKQ4BL3PK8](https://doi.org/10.5067/9IKKQ4BL3PK8)
+
+
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Net_Ecosystem_Exchange.md b/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Net_Ecosystem_Exchange.md
index 6f606cf7f..4ea81dc5d 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Net_Ecosystem_Exchange.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L4_Mean_Net_Ecosystem_Exchange.md
@@ -2,6 +2,8 @@ The Soil Moisture Active Passive (SMAP) “Net Ecosystem CO2 Exchange (L4, 9 km
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate. The imagery resolution is 2 km and sensor resolution is 9 km. The temporal resolution is daily.
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
Data field: `nee_mean`
+
+References: SPL4CMDL [doi:https://doi.org/10.5067/9IKKQ4BL3PK8](https://doi.org/10.5067/9IKKQ4BL3PK8)
+
+
diff --git a/config/default/common/config/metadata/layers/smap/SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange.md b/config/default/common/config/metadata/layers/smap/SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange.md
index f92302f64..ea076175a 100644
--- a/config/default/common/config/metadata/layers/smap/SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange.md
+++ b/config/default/common/config/metadata/layers/smap/SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange.md
@@ -2,6 +2,6 @@ The Soil Moisture Active Passive (SMAP) “Net Ecosystem CO2 Exchange Uncertaint
The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-References: [SMAP L4 Global Daily 9 km Carbon Net Ecosystem Exchange](https://nsidc.org/data/spl4cmdl/)
-
Data field: `nee_mean`
+
+References: SPL4CMDL [doi:https://doi.org/10.5067/9IKKQ4BL3PK8](https://doi.org/10.5067/9IKKQ4BL3PK8)
diff --git a/config/default/common/config/metadata/layers/smap/Sigma0.md b/config/default/common/config/metadata/layers/smap/Sigma0.md
deleted file mode 100644
index bec53485b..000000000
--- a/config/default/common/config/metadata/layers/smap/Sigma0.md
+++ /dev/null
@@ -1,29 +0,0 @@
-### Sigma0 3 km (L3, Active, HH Polarization | VV Polarization | XPOL Polarization)
-Temporal coverage: 13 April 2015 - 7 July 2015
-
-The Soil Moisture Active Passive (SMAP) “Sigma0 3 km (L3, Active, HH Polarization)", "Sigma0 3 km (L3, Active, VV Polarization)" and "Sigma0 3 km (L3, Active, XPOL Polarization)” layers displays backscatter from the SMAP radar in decibels (dB) posted on a 3 km EASE-Grid 2.0 for the horizontal transmit and horizontal receive (HH) polarizations, vertical transmit and vertical receive (VV) polarizations, and the cross (XPOL) polarization. Backscatter is the portion of the outgoing radar signal that the target redirects directly back towards the radar antenna. Sigma0 (Sigma nought), the backscatter coefficient, is the normalized measure of the radar return from a distributed target, defined per unit area on the ground.
-
-The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
-Data fields: `sigma0_hh_mean`, `sigma0_vv_mean`, `sigma0_xpol_mean`
-
-### Sigma0 3 km QA and RFI Flags
-Temporal coverage: 13 April 2015 - 7 July 2015
-
-### Sigma0 3 km QA (L3, Active, HH Polarization | VV Polarization | XPOL Polarization)
-The Soil Moisture Active Passive (SMAP) "Sigma0 3 km QA (L3, Active, HH Polarization)", "Sigma0 3 km QA (L3, Active, VV Polarization)" and "Sigma0 3 km QA (L3, Active, XPOL Polarization" layers display quality assurance (QA) flags for Sigma0 backscatter from the SMAP radar for the horizontal (H) transmit and horizontal (H) receive polarizations, the vertical (V) transmit and the vertical (V) receive polarizations, and the cross-polarizations (XPOL).
-
-Within the image, green indicates that Sigma0 observations have acceptable quality for science use, yellow indicates that caution should be used with the Sigma0 observations as one or more quality-impacting conditions have been identified, and red indicates that Sigma0 observations are flagged as bad due to unacceptable quality.
-
-### Sigma0 3 km RFI (L3, Active, HH Polarization | VV Polarization | XPOL Polarization)
-The Soil Moisture Active Passive (SMAP) "Sigma0 3 km RFI (L3, Active, HH Polarization)", "Sigma0 3 km RFI (L3, Active, VV Polarization)" and "Sigma0 3 km RFI (L3, Active, XPOL Polarization" layers display Radio Frequency Interference (RFI) quality flags of backscatter posted on a 3 km EASE-Grid 2.0 for the horizontal transmit and the horizontal receive (HH) polarizations, the vertical transmit and the vertical receive (VV) polarizations, and the cross-polarizations (XPOL) from the SMAP radar. RFI refers to the interference in measurements from other transmitters operating at frequencies in and adjacent to the SMAP L-band frequency.
-
-Within the image, green indicates that Sigma0 observations are free of RFI and approved for science use, yellow indicates that caution should be used with the Sigma0 observations as RFI was detected but mitigated, and red indicates that Sigma0 observations are flagged as bad due to RFI.
-
-The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.
-
-References: [SMAP L3 Radar Global Daily 3 km EASE-Grid Soil Moisture](https://nsidc.org/data/spl3sma/)
-
-Data fields: `sigma0_qual_flag_hh`, `sigma0_qual_flag_vv`, `sigma0_qual_flag_xpol`
diff --git a/config/default/common/config/metadata/layers/srtm/SRTM_Color_Index.md b/config/default/common/config/metadata/layers/srtm/SRTM_Color_Index.md
index ca6b6cedc..3d0120ed5 100644
--- a/config/default/common/config/metadata/layers/srtm/SRTM_Color_Index.md
+++ b/config/default/common/config/metadata/layers/srtm/SRTM_Color_Index.md
@@ -1,5 +1,3 @@
-### Shuttle Radar Topography Mission (NASA SRTM v3, Color Index)
-
The Shuttle Radar Topography Mission (NASA SRTM v3, Color Index) layer is from the the NASA Making Earth System Data Records for Use in Research Environments (MEaSUREs) Version 3 Shuttle Radar Topography Mission (SRTM) data product (SRTMGL1). This layer provides near-global, void-free, elevation information at 1 arc second (~30 meter) spatial resolution between 60° north and 56° south latitude. NASA SRTM data products result from a collaborative effort by the National Aeronautics and Space Administration (NASA) and the National Geospatial-Intelligence Agency (NGA), as well as the participation of the German and Italian space agencies. The purpose of the SRTM was to generate a digital elevation model (DEM) of 80% of the Earth's surface using radar interferometry. SRTM was a primary component of the payload on the Space Shuttle Endeavour during its STS-99 mission. Endeavour launched February 11, 2000 and flew for 11 days. On the default palette, white indicates the highest elevations, then brown, yellow and greens indicate low elevations.
References: [LP DAAC - NASA MEaSUREs SRTM Version 3](https://doi.org/10.5067/MEaSUREs/SRTM/SRTMGL1.003)
diff --git a/config/default/common/config/wv.json/measurements/Flood Hazard.json b/config/default/common/config/wv.json/measurements/Flood Hazard.json
index cf581cba5..a515fe178 100644
--- a/config/default/common/config/wv.json/measurements/Flood Hazard.json
+++ b/config/default/common/config/wv.json/measurements/Flood Hazard.json
@@ -8,7 +8,7 @@
"SEDAC": {
"id": "sedac",
"title": "SEDAC",
- "description": "sedac/FloodHazard",
+ "description": "",
"image": "",
"settings": [
"NDH_Flood_Hazard_Frequency_Distribution_1985-2003",
diff --git a/config/default/common/config/wv.json/measurements/Geostationary.json b/config/default/common/config/wv.json/measurements/Geostationary.json
index 2917cac92..8235a7dc4 100644
--- a/config/default/common/config/wv.json/measurements/Geostationary.json
+++ b/config/default/common/config/wv.json/measurements/Geostationary.json
@@ -8,7 +8,7 @@
"GOES-East": {
"id": "goes-east",
"title": "GOES-East",
- "description": "goes/goes-east",
+ "description": "",
"image": "",
"settings": [
"GOES-East_ABI_GeoColor",
@@ -20,7 +20,7 @@
"GOES-West": {
"id": "goes-west",
"title": "GOES-West",
- "description": "goes/goes-west",
+ "description": "",
"image": "",
"settings": [
"GOES-West_ABI_GeoColor",
@@ -32,7 +32,7 @@
"Himawari-8": {
"id": "himawari-8",
"title": "Himawari-8",
- "description": "himawari/himawari-8",
+ "description": "",
"image": "",
"settings": [
"Himawari_AHI_Band3_Red_Visible_1km",
diff --git a/config/default/common/config/wv.json/measurements/Global Digital Elevation Map.json b/config/default/common/config/wv.json/measurements/Global Digital Elevation Map.json
index d8ba6c009..718d703e4 100644
--- a/config/default/common/config/wv.json/measurements/Global Digital Elevation Map.json
+++ b/config/default/common/config/wv.json/measurements/Global Digital Elevation Map.json
@@ -19,7 +19,7 @@
"Space Shuttle Endeavour/STS-99": {
"id": "space-shuttle-endeavour-sts-99",
"title": "Space Shuttle Endeavour/STS-99",
- "description": "srtm/SRTM_Color_Index",
+ "description": "",
"image": "",
"settings": [
"SRTM_Color_Index"
diff --git a/config/default/common/config/wv.json/measurements/Heterotrophic Respiration.json b/config/default/common/config/wv.json/measurements/Heterotrophic Respiration.json
index 8550ba2f8..dac4f38e9 100644
--- a/config/default/common/config/wv.json/measurements/Heterotrophic Respiration.json
+++ b/config/default/common/config/wv.json/measurements/Heterotrophic Respiration.json
@@ -8,7 +8,7 @@
"SMAP/Model Value-Added": {
"id": "smap-model-value-added",
"title": "SMAP/Model Value-Added",
- "description": "smap/HeterotrophicResipration",
+ "description": "",
"image": "",
"settings": [
"SMAP_L4_Mean_Heterotrophic_Respiration"
diff --git a/config/default/common/config/wv.json/measurements/Ice Velocity Antarctica.json b/config/default/common/config/wv.json/measurements/Ice Velocity Antarctica.json
index 279a2bdf5..5f3236422 100644
--- a/config/default/common/config/wv.json/measurements/Ice Velocity Antarctica.json
+++ b/config/default/common/config/wv.json/measurements/Ice Velocity Antarctica.json
@@ -8,7 +8,7 @@
"SSMI": {
"id": "ssmi",
"title": "SSMI",
- "description": "multi-mission/IceVelocityAntarctica",
+ "description": "",
"image": "",
"settings": [
"MEaSUREs_Ice_Velocity_Antarctica"
diff --git a/config/default/common/config/wv.json/measurements/Ice Velocity Greenland.json b/config/default/common/config/wv.json/measurements/Ice Velocity Greenland.json
index 83725aeb1..1692849b3 100644
--- a/config/default/common/config/wv.json/measurements/Ice Velocity Greenland.json
+++ b/config/default/common/config/wv.json/measurements/Ice Velocity Greenland.json
@@ -8,7 +8,7 @@
"SSMI": {
"id": "ssmi",
"title": "SSMI",
- "description": "multi-mission/IceVelocityGreenland",
+ "description": "",
"image": "",
"settings": [
"MEaSUREs_Ice_Velocity_Greenland"
diff --git a/config/default/common/config/wv.json/measurements/Isotropic Kernel Parameters.json b/config/default/common/config/wv.json/measurements/Isotropic Kernel Parameters.json
index d92d20f61..9e59efa7d 100644
--- a/config/default/common/config/wv.json/measurements/Isotropic Kernel Parameters.json
+++ b/config/default/common/config/wv.json/measurements/Isotropic Kernel Parameters.json
@@ -8,7 +8,7 @@
"Aqua and Terra/MODIS": {
"id": "aqua-terra-modis",
"title": "Aqua and Terra/MODIS",
- "description": "modis/combined/IsotropicKernelParameters",
+ "description": "",
"image": "",
"settings": [
"MODIS_Combined_MAIAC_L3_IsotropicKernelParameters_8Day"
diff --git a/config/default/common/config/wv.json/measurements/Latitude Longitude Lines.json b/config/default/common/config/wv.json/measurements/Latitude Longitude Lines.json
index bfca44c73..34aeb9e36 100644
--- a/config/default/common/config/wv.json/measurements/Latitude Longitude Lines.json
+++ b/config/default/common/config/wv.json/measurements/Latitude Longitude Lines.json
@@ -9,7 +9,7 @@
"OpenLayers": {
"id": "openlayers",
"title": "OpenLayers",
- "description": "reference/LatLongLines",
+ "description": "",
"image": "",
"settings": [
"Graticule"
diff --git a/config/default/common/config/wv.json/measurements/Net Ecosystem CO2 Exchange.json b/config/default/common/config/wv.json/measurements/Net Ecosystem CO2 Exchange.json
index 400e43982..c58ec2d36 100644
--- a/config/default/common/config/wv.json/measurements/Net Ecosystem CO2 Exchange.json
+++ b/config/default/common/config/wv.json/measurements/Net Ecosystem CO2 Exchange.json
@@ -8,11 +8,11 @@
"SMAP/Model Value-Added": {
"id": "smap-model-value-added",
"title": "SMAP/Model Value-Added",
- "description": "smap/NetEcosystemCO2Exchange",
+ "description": "",
"image": "",
"settings": [
- "SMAP_L4_Mean_Net_Ecosystem_Exchange",
- "SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange"
+ "SMAP_L4_Mean_Net_Ecosystem_Exchange",
+ "SMAP_L4_Uncertainty_Mean_Net_Ecosystem_Exchange"
]
}
}
diff --git a/config/default/common/config/wv.json/measurements/Sigma0.json b/config/default/common/config/wv.json/measurements/Sigma0.json
index 80e9fc641..41758f76e 100644
--- a/config/default/common/config/wv.json/measurements/Sigma0.json
+++ b/config/default/common/config/wv.json/measurements/Sigma0.json
@@ -8,7 +8,7 @@
"SMAP/Radar": {
"id": "smap-radar",
"title": "SMAP/Radar",
- "description": "smap/Sigma0",
+ "description": "",
"image": "",
"settings": [
"SMAP_L3_Active_Sigma0_HH",