Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

updates to tour story for imagery availability

minniewong689de98fdff2
diff --git a/config/default/common/config/metadata/stories/geostationary/step002.md b/config/default/common/config/metadata/stories/geostationary/step002.md
index adafb31b0..793906c91 100644
--- a/config/default/common/config/metadata/stories/geostationary/step002.md
+++ b/config/default/common/config/metadata/stories/geostationary/step002.md
@@ -1 +1 @@
-Worldview now has imagery from several geostationary satellites! These satellites follow the Earth's rotation and travel at the same rate of the rotation, so from Earth, it appears the satellite is fixed in one location. This means the satellite captures the same view of Earth and provides almost continuous coverage of one area. Worldview has imagery from the Geostationary Operational Environmental Satellites-East (GOES-East), GOES-West, and Himawari-8. The geostationary imagery is available in 10 minute increments, available approximately 30 - 40 minutes after satellite observation, and on a rolling 90 day basis.
\ No newline at end of file
+Worldview now has imagery from several geostationary satellites! These satellites follow the same direction and rate of the Earth's rotation, so from Earth, it appears the satellite is fixed in one location. This means the satellite captures the same view of Earth and provides almost continuous coverage of one area. Worldview has imagery from the Geostationary Operational Environmental Satellites-East (GOES-East), GOES-West, and Himawari-8. The geostationary imagery is available in 10 minute increments, available approximately 30 to 40 minutes after satellite observation, and on a rolling 30 to 90 day basis.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/stories/geostationary/step006.md b/config/default/common/config/metadata/stories/geostationary/step006.md
index f5d2a87ee..5c1b97812 100644
--- a/config/default/common/config/metadata/stories/geostationary/step006.md
+++ b/config/default/common/config/metadata/stories/geostationary/step006.md
@@ -1,3 +1,3 @@
-The Red Visible layer is used primarily to monitor the evolution of clouds throughout the daylight hours. It is also useful for identifying small-scale features such as river fog/clear air boundaries, or overshooting tops of cumulus clouds. It can also be used to identify daytime snow and ice cover, diagnose low-level cloud-drift winds, assist with detections of volcanic ash and analysis of hurricanes and winter storms. This imagery is at 1 km resolution. Press "Play" to view Hurricane Dorian, a category 5 hurricane. The animation shows the storm's movement westward as the sun rises and illuminates Earth's surface. The storm makes landfall on the Abaco Islands, Bahamas at 16:40 UTC, or 12:40 PM local time.
+The Red Visible layer is used primarily to monitor the evolution of clouds throughout the daylight hours. It is also useful for identifying small-scale features such as river fog/clear air boundaries, or overshooting tops of cumulus clouds. It can also be used to identify daytime snow and ice cover, diagnose low-level cloud-drift winds, assist with detections of volcanic ash and analysis of hurricanes and winter storms. This imagery is at 1 km resolution. This imagery is available on a rolling 30 day basis from the GOES-East, GOES-West, and Himawari-8 satellites. Press "Play" to view Hurricane Dorian, a category 5 hurricane. The animation shows the storm's movement westward as the sun rises and illuminates Earth's surface. The storm makes landfall on the Abaco Islands, Bahamas at 16:40 UTC, or 12:40 PM local time.
Find out more about the Red Visible (0.64 um, Band 2) layer with the [GOES-R: ABI Band 2 (0.64 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band02.pdf).
\ No newline at end of file
diff --git a/config/default/common/config/metadata/stories/geostationary/step007.md b/config/default/common/config/metadata/stories/geostationary/step007.md
index 9c1fbe4ee..f73b24a87 100644
--- a/config/default/common/config/metadata/stories/geostationary/step007.md
+++ b/config/default/common/config/metadata/stories/geostationary/step007.md
@@ -1,3 +1,3 @@
-The Clean Infrared layer is useful for detecting clouds during the day and night. It is quite useful in retrievals of cloud top height. It can also be used to identify and classify cloud and other atmospheric features, estimate cloud-top brightness temperature and cloud particle size, convective severe weather signatures, and hurricane intensity. This imagery is at 2 km resolution. Click on the "Play" button and watch Hurricane Nicolas on September 13 to 14 making landfall on Texas and Louisiana. Note the very low temperatures of the storm clouds (in magenta/white/black) when the hurricane is in the Gulf of Mexico and becomes warmer (red to green) as it makes landfall.
+The Clean Infrared layer is useful for detecting clouds during the day and night. It is quite useful in retrievals of cloud top height. It can also be used to identify and classify cloud and other atmospheric features, estimate cloud-top brightness temperature and cloud particle size, convective severe weather signatures, and hurricane intensity. This imagery is at 2 km resolution. This imagery is available on a rolling 30 day basis from the GOES-East, GOES-West, and Himawari-8 satellites. Click on the "Play" button and watch Hurricane Nicolas on September 13 to 14 making landfall on Texas and Louisiana. Note the very low temperatures of the storm clouds (in magenta/white/black) when the hurricane is in the Gulf of Mexico and becomes warmer (red to green) as it makes landfall.
Read the [GOES-R: ABI Band 13 (10.3 um) Quick Guide](https://www.star.nesdis.noaa.gov/GOES/documents/ABIQuickGuide_Band13.pdf) for more information on how to interpret the colors in the imagery.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/stories/geostationary/step008.md b/config/default/common/config/metadata/stories/geostationary/step008.md
index a9105c571..96509228f 100644
--- a/config/default/common/config/metadata/stories/geostationary/step008.md
+++ b/config/default/common/config/metadata/stories/geostationary/step008.md
@@ -1,3 +1,3 @@
-The Air Mass layer is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and to identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. This imagery is at 2 km resolution, Typhoon Mindulle is shown here on 1 October 2021 at 00:00 UTC, approaching Japan. In the center of the storm are high thick clouds in white, the dark red/orange area on the western side of the storm are jet stream/PV/deformation zones/dry upper level, and the green tinted areas show warm air masses.
+The Air Mass layer is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and to identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. This imagery is at 2 km resolution. This imagery is available on a rolling 30 day basis from the GOES-East, GOES-West, and Himawari-8 satellites. Typhoon Mindulle is shown here on 1 October 2021 at 00:00 UTC, approaching Japan. In the center of the storm are high thick clouds in white, the dark red/orange area on the western side of the storm are jet stream/PV/deformation zones/dry upper level, and the green tinted areas show warm air masses.
Read the [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf) for more information on how to interpret the colors in the imagery.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/stories/geostationary/step009.md b/config/default/common/config/metadata/stories/geostationary/step009.md
index 50cdd51bc..aa477087e 100644
--- a/config/default/common/config/metadata/stories/geostationary/step009.md
+++ b/config/default/common/config/metadata/stories/geostationary/step009.md
@@ -1 +1 @@
-The GeoColor layer provides an approximation to daytime True Color imagery. The combination of spectral bands yields an appearance similar to what the human eye would perceive for land surface, oceanic and atmospheric features, with atmospheric correction used to make the appearance of these features sharper. Thus it is used primarily for the intuitive interpretation of meteorological and surface-based features such as smoke, blowing dust, and vegetation types (forests, deserts, croplands, etc.) This imagery is at 1 km resolution. Press "Play" to view a GOES-West animation showing smoke emanating from the Dixie Fire and Antelope Fires, and watch the formation of pyrocumulonimbus clouds creating fire driven thunderstorms in Northern California and Oregon on 5 August 2021, 18:40-22:30 UTC/11:40-15:40pm PDT.
\ No newline at end of file
+The GeoColor layer provides an approximation to daytime True Color imagery. The combination of spectral bands yields an appearance similar to what the human eye would perceive for land surface, oceanic and atmospheric features, with atmospheric correction used to make the appearance of these features sharper. Thus it is used primarily for the intuitive interpretation of meteorological and surface-based features such as smoke, blowing dust, and vegetation types (forests, deserts, croplands, etc.) This imagery is at 1 km resolution. This imagery is available on a rolling 90 day basis from the GOES-East and GOES-West satellites. Press "Play" to view a GOES-West animation showing smoke emanating from the Dixie Fire and Antelope Fires, and watch the formation of pyrocumulonimbus clouds creating fire driven thunderstorms in Northern California and Oregon on 5 August 2021, 18:40-22:30 UTC/11:40-15:40pm PDT.
\ No newline at end of file