Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

WV-3203, WV-3650, WV-3768: Update TEMPO configs and add O3 Profile (#6389)

minniewong7532e94e0a00
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md
index 57231f285..3915d9e6b 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Fraction layer provides information on the effective cloud fraction at 466 nm derived from the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is a unitless quantity.
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method.
O<sub>2</sub>-O<sub>2</sub> cloud Level 2 files provide cloud information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)
\ No newline at end of file
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_CLDO4_L2_NRT [10.5067/IS-40e/TEMPO/CLDO4_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_NRT_L2.002); TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md
index 61d72ad36..0e5e305f6 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to display pixels with solar zenith angles less than 80 degrees.
O<sub>2</sub>-O<sub>2</sub> cloud Level 2 files provide cloud information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_CLDO4_L2_NRT [10.5067/IS-40e/TEMPO/CLDO4_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_NRT_L2.002); TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md
index 6b27a4141..023443e74 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.
Formaldehyde Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_HCHO_L2 [doi:10.5067/IS-40e/TEMPO/HCHO_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L2.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications. NRT imagery may show East-West oriented stripes associated with using a radiance reference calculated with observations from previous days.
+
+References: TEMPO_HCHO_L2_NRT [doi:10.5067/IS-40e/TEMPO/HCHO_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_NRT_L2.002); TEMPO_HCHO_L2 [doi:10.5067/IS-40e/TEMPO/HCHO_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L2.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md
index 6962ddc4a..d95116171 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements) and solar zenith angle (removing data retrieved at high solar zenith angles). The filters applied are set to remove pixels based on the following: main data quality flag greater than 1 and solar zenith angle greater than 80 degrees.
Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_NO2_L2_NRT [10.5067/IS-40e/TEMPO/NO2_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L2.002); TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md
index 57a5e119e..0c62a66c7 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.
Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_NO2_L2_NRT [10.5067/IS-40e/TEMPO/NO2_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L2.002); TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md
index 11d4af73c..43c593200 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md
@@ -1,6 +1,6 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Fraction layer provides information on the effective cloud fraction (a unitless quantity) derived using the mixed Lambert Equivalent Reflectivity (LER) model from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md
index 7d000446d..7b1970c8f 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md
@@ -1,6 +1,7 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and viewing zenith angle (removing data retrieved at high viewing zenith angles). The filters applied are set to remove pixels based on the following: main data quality flag not equal to 0, 1, 2, or 5; solar zenith angle greater than 80 degrees; and viewing zenith angle greater than 80 degrees.
+Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.md
new file mode 100644
index 000000000..733ba751f
--- /dev/null
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.md
@@ -0,0 +1,7 @@
+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Total Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is performed using the Smithsonian Astrophysical Observatory (SAO) ozone profile algorithm, which is based on the optimal estimation method. The total ozone column is calculated by integrating the ozone profile provided in 24 vertical layers.
+
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). Due to the computational burden of on-line radiative transfer calculations and limited computational resources, a spatial coadding strategy is applied. Specifically, four native ground pixels in the North-South direction are coadded and provided as a single retrieval pixel. Therefore, the product’s spatial resolution is ~8 km x 4.75 km at the center of TEMPO’s FOR. The imagery is generated at 2 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels based on several criteria, using retrieval exit status (removing data that are not converged), solar zenith angle (removing data retrieved at high solar zenith angles), viewing zenith angle (removing data retrieved at high viewing zenith angles), fit RMS (removing with a high ratio of fitting residual to measurement error), average residual (removing data with high average relative fitting residual) and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: retrieval exit status ≤ 1 and ≥ 99, solar zenith angle greater than 80 degrees, viewing zenith angle greater than 80 degrees, fit RMS greater than 3, average residual greater than 0.3, and effective cloud fraction greater than 0.5.
+
+Ozone profile Level 2 files provide ozone (ozone profile, total ozone column, troposphere ozone column, and stratosphere ozone column) and supporting information at spatial resolution of four North-South direction coadded from TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+
+References: TEMPO_O3PROF_L2 [10.5067/IS-40e/TEMPO/O3PROF_L2.004](https://doi.org/10.5067/IS-40e/TEMPO/O3PROF_L2.004)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.md
new file mode 100644
index 000000000..ac26e161f
--- /dev/null
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.md
@@ -0,0 +1,7 @@
+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Tropospheric Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the troposphere and is measured in Dobson Units (DU). The retrieval is performed using the Smithsonian Astrophysical Observatory (SAO) ozone profile algorithm, which is based on the optimal estimation method. The troposphere ozone column is calculated by integrating the ozone profile from surface to the tropopause, using tropopause information from the Goddard Earth Observing System Composition Forecast (GEOS-CF) data.
+
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). Due to the computational burden of on-line radiative transfer calculations and limited computational resources, a spatial coadding strategy is applied. Specifically, four native ground pixels in the North-South direction are coadded and provided as a single retrieval pixel. Therefore, the product’s spatial resolution is ~8 km x 4.75 km at the center of TEMPO’s FOR. The imagery is generated at 2 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to remove low-quality pixels based on several criteria, using retrieval exit status (removing data that are not converged), solar zenith angle (removing data retrieved at high solar zenith angles), viewing zenith angle (removing data retrieved at high viewing zenith angles), fit RMS (removing with a high ratio of fitting residual to measurement error), average residual (removing data with high average relative fitting residual) and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: retrieval exit status ≤ 1 and ≥ 99, solar zenith angle greater than 80 degrees, viewing zenith angle greater than 80 degrees, fit RMS greater than 3, average residual greater than 0.3, and effective cloud fraction greater than 0.5.
+
+Ozone profile Level 2 files provide ozone (ozone profile, total ozone column, troposphere ozone column, and stratosphere ozone column) and supporting information at spatial resolution of four North-South direction coadded from TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+
+References: TEMPO_O3PROF_L2 [10.5067/IS-40e/TEMPO/O3PROF_L2.004](https://doi.org/10.5067/IS-40e/TEMPO/O3PROF_L2.004)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md
index ecf30de27..83bf0c08a 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md
@@ -1,6 +1,6 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) ultraviolet (UV) Aerosol Index layer provides information on the UV aerosol index (a unitless quantity) using the difference between measured and theoretical radiance contrasts at two wavelengths (331.2 and 360 nm) from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The imagery is generated at 1 km resolution by projecting the data onto a regular grid using an Elliptically Weighted Averaging Nearest Neighbor interpolation method. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md
index c1a7534a5..67d1b1281 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Fraction layer provides information on the effective cloud fraction at 466 nm derived from the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is a unitless quantity.
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02 degree longitude x 0.02 degree latitude grid, and the imagery sampling is 2 km. The layer is filtered to display pixels with solar zenith angles less than 80 degrees.
-O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_CLDO4_L3_NRT [10.5067/IS-40e/TEMPO/CLDO4_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_NRT_L3.002); TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md
index 7a74233d5..44a9ccb35 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02 degree longitude x 0.02 degree latitude grid, and the imagery sampling is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
-O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_CLDO4_L3_NRT [10.5067/IS-40e/TEMPO/CLDO4_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_NRT_L3.002); TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md
index 2fadd3250..3079dbacc 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.
-Formaldehyde Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+Formaldehyde Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_HCHO_L3 [doi:10.5067/IS-40e/TEMPO/HCHO_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L3.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications. NRT imagery may show East-West oriented stripes associated with using a radiance reference calculated with observations from previous days.
+
+References: TEMPO_HCHO_L3_NRT [10.5067/IS-40e/TEMPO/HCHO_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_NRT_L3.002); TEMPO_HCHO_L3 [doi:10.5067/IS-40e/TEMPO/HCHO_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md
index 879202798..dc8adb57f 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements) and solar zenith angle (removing data retrieved at high solar zenith angles). The filters applied are set to remove pixels based on the following: main data quality flag greater than 1 and solar zenith angle greater than 80 degrees.
-Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_NO2_L3_NRT [10.5067/IS-40e/TEMPO/NO2_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L3.002); TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md
index cf5afa7d7..629377dac 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md
@@ -1,7 +1,9 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.
-Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
-References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)
+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.
+
+References: TEMPO_NO2_L3_NRT [10.5067/IS-40e/TEMPO/NO2_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L3.002); TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md
index 9ae63fa45..200730ad9 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md
@@ -1,6 +1,6 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Fraction layer provides information on the effective cloud fraction (a unitless quantity) derived using the mixed Lambert Equivalent Reflectivity (LER) model from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02 degree longitude x 0.02 degree latitude grid, and the imagery sampling is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md
index 3104ec151..cb96efdf1 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md
@@ -1,7 +1,7 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02 degree longitude x 0.02 degree latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels based on the solar zenith angle (removing data retrieved at high solar zenith angles) and viewing zenith angle (removing data retrieved at high viewing zenith angles). The filters applied are set to remove pixels based on the following: solar zenith angle greater than 80 degrees and viewing zenith angle greater than 80 degrees.
-Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.md
new file mode 100644
index 000000000..481bdc5a9
--- /dev/null
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.md
@@ -0,0 +1,7 @@
+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Total Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is performed using the Smithsonian Astrophysical Observatory (SAO) ozone profile algorithm, which is based on the optimal estimation method. The total ozone column is calculated by integrating the ozone profile provided in 24 vertical layers.
+
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the product’s spatial resolution is ~8 km x 4.75 km. The Level 3 product is regridded from the Level 2 product onto a 0.04º longitude x 0.04º latitude grid, and the imagery sampling is 4 km. The layer is filtered to remove low-quality pixels based on several criteria, using solar zenith angle (removing data retrieved at high solar zenith angles), viewing zenith angle (removing data retrieved at high viewing zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: solar zenith angle greater than 80 degrees, viewing zenith angle greater than 80 degrees, and effective cloud fraction greater than 0.5.
+
+Ozone profile Level 3 files provide ozone (ozone profile, total ozone column, troposphere ozone column, and stratosphere ozone column) and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+
+References: TEMPO_O3PROF_L3 [10.5067/IS-40e/TEMPO/O3PROF_L3.004](https://doi.org/10.5067/IS-40e/TEMPO/O3PROF_L3.004)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.md
new file mode 100644
index 000000000..53174d022
--- /dev/null
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.md
@@ -0,0 +1,7 @@
+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Tropospheric Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the tropospher and is measured in Dobson Units (DU). The retrieval is performed using the Smithsonian Astrophysical Observatory (SAO) ozone profile algorithm, which is based on the optimal estimation method. The troposphere ozone column is calculated by integrating the ozone profile from surface to the tropopause, using tropopause information from the Goddard Earth Observing System Composition Forecast (GEOS-CF) data.
+
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the product’s spatial resolution is ~8 km x 4.75 km. The Level 3 product is regridded from the Level 2 product onto a 0.04 longitude x 0.04 latitude grid, and the imagery sampling is 4 km. The layer is filtered to remove low-quality pixels based on several criteria, using solar zenith angle (removing data retrieved at high solar zenith angles), viewing zenith angle (removing data retrieved at high viewing zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: solar zenith angle greater than 80 degrees, viewing zenith angle greater than 80 degrees, and effective cloud fraction greater than 0.5.
+
+Ozone profile Level 3 files provide ozone (ozone profile, total ozone column, troposphere ozone column, and stratosphere ozone column) and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+
+References: TEMPO_O3PROF_L3 [10.5067/IS-40e/TEMPO/O3PROF_L3.004](https://doi.org/10.5067/IS-40e/TEMPO/O3PROF_L3.004)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md
index b3cfa9857..fb1c4b805 100644
--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md
+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md
@@ -1,7 +1,7 @@
The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (l3) ultraviolet (UV) Aerosol Index layer provides information on the UV aerosol index (a unitless quantity) using the difference between measured and theoretical radiance contrasts at two wavelengths (331.2 and 360 nm) from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.
-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02 degree longitude x 0.02 degree latitude grid, and the imagery sampling is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.
-Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
+Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.
References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)
diff --git a/config/default/common/config/wv.json/layerOrder.json b/config/default/common/config/wv.json/layerOrder.json
index 94ed82bed..a06efd9e7 100644
--- a/config/default/common/config/wv.json/layerOrder.json
+++ b/config/default/common/config/wv.json/layerOrder.json
@@ -110,6 +110,8 @@
"TEMPO_L2_Ozone_Column_Amount_Granule",
"TEMPO_L2_Ozone_Cloud_Fraction_Granule",
"TEMPO_L2_Ozone_UV_Aerosol_Index_Granule",
+ "TEMPO_L2_Ozone_Profile_Total_Column_Granule",
+ "TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule",
"TEMPO_L3_Formaldehyde_Vertical_Column",
"TEMPO_L3_NO2_Vertical_Column_Stratosphere",
"TEMPO_L3_NO2_Vertical_Column_Troposphere",
@@ -118,6 +120,8 @@
"TEMPO_L3_Ozone_Column_Amount",
"TEMPO_L3_Ozone_Cloud_Fraction",
"TEMPO_L3_Ozone_UV_Aerosol_Index",
+ "TEMPO_L3_Ozone_Profile_Total_Column",
+ "TEMPO_L3_Ozone_Profile_Troposphere_Column",
"VIIRS_NOAA21_DayNightBand",
"VIIRS_NOAA20_DayNightBand_At_Sensor_Radiance",
"VIIRS_NOAA20_DayNightBand_AtSensor_M15",
diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.json
new file mode 100644
index 000000000..789e1391a
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule.json
@@ -0,0 +1,19 @@
+{
+ "layers": {
+ "TEMPO_L2_Ozone_Profile_Total_Column_Granule": {
+ "id": "TEMPO_L2_Ozone_Profile_Total_Column_Granule",
+ "title": "Ozone Profile (L2, Total Ozone Column, Subdaily) (BETA)",
+ "subtitle": "TEMPO",
+ "description": "tempo/TEMPO_L2_Ozone_Profile_Total_Column_Granule",
+ "tags": "",
+ "group": "overlays",
+ "layergroup": "Ozone",
+ "type": "granule",
+ "period": "subdaily",
+ "count": 1,
+ "dataAvailability": "dd",
+ "disableSnapshot": true,
+ "shiftadjacentdays": false
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.json
new file mode 100644
index 000000000..1c31cdaf9
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.json
@@ -0,0 +1,19 @@
+{
+ "layers": {
+ "TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule": {
+ "id": "TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule",
+ "title": "Ozone Profile (L2, Tropospheric Ozone Column, Subdaily) (BETA)",
+ "subtitle": "TEMPO",
+ "description": "tempo/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule",
+ "tags": "",
+ "group": "overlays",
+ "layergroup": "Ozone",
+ "type": "granule",
+ "period": "subdaily",
+ "count": 1,
+ "dataAvailability": "dd",
+ "disableSnapshot": true,
+ "shiftadjacentdays": false
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.json
new file mode 100644
index 000000000..45454540e
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Total_Column.json
@@ -0,0 +1,15 @@
+{
+ "layers": {
+ "TEMPO_L3_Ozone_Profile_Total_Column": {
+ "id": "TEMPO_L3_Ozone_Profile_Total_Column",
+ "title": "Ozone Profile (L3, Total Ozone Column, Subdaily) (BETA)",
+ "subtitle": "TEMPO",
+ "description": "tempo/TEMPO_L3_Ozone_Profile_Total_Column",
+ "tags": "",
+ "group": "overlays",
+ "layergroup": "Ozone",
+ "dataAvailability": "dd",
+ "shiftadjacentdays": false
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.json
new file mode 100644
index 000000000..ec196b87a
--- /dev/null
+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column.json
@@ -0,0 +1,15 @@
+{
+ "layers": {
+ "TEMPO_L3_Ozone_Profile_Troposphere_Column": {
+ "id": "TEMPO_L3_Ozone_Profile_Troposphere_Column",
+ "title": "Ozone Profile (L3, Tropospheric Ozone Column, Subdaily) (BETA)",
+ "subtitle": "TEMPO",
+ "description": "tempo/TEMPO_L3_Ozone_Profile_Troposphere_Column",
+ "tags": "",
+ "group": "overlays",
+ "layergroup": "Ozone",
+ "dataAvailability": "dd",
+ "shiftadjacentdays": false
+ }
+ }
+}
\ No newline at end of file
diff --git a/config/default/common/config/wv.json/measurements/Featured - TEMPO.json b/config/default/common/config/wv.json/measurements/Featured - TEMPO.json
index 09bf1b0f9..f7b0a8f82 100644
--- a/config/default/common/config/wv.json/measurements/Featured - TEMPO.json
+++ b/config/default/common/config/wv.json/measurements/Featured - TEMPO.json
@@ -19,6 +19,8 @@
"TEMPO_L2_Ozone_Column_Amount_Granule",
"TEMPO_L2_Ozone_Cloud_Fraction_Granule",
"TEMPO_L2_Ozone_UV_Aerosol_Index_Granule",
+ "TEMPO_L2_Ozone_Profile_Total_Column_Granule",
+ "TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule",
"TEMPO_L3_Formaldehyde_Vertical_Column",
"TEMPO_L3_NO2_Vertical_Column_Stratosphere",
"TEMPO_L3_NO2_Vertical_Column_Troposphere",
@@ -26,7 +28,9 @@
"TEMPO_L3_Cloud_Cloud_Pressure_Total",
"TEMPO_L3_Ozone_Column_Amount",
"TEMPO_L3_Ozone_Cloud_Fraction",
- "TEMPO_L3_Ozone_UV_Aerosol_Index"
+ "TEMPO_L3_Ozone_UV_Aerosol_Index",
+ "TEMPO_L3_Ozone_Profile_Total_Column",
+ "TEMPO_L3_Ozone_Profile_Troposphere_Column"
]
}
}
diff --git a/config/default/common/config/wv.json/measurements/Ozone.json b/config/default/common/config/wv.json/measurements/Ozone.json
index 95239edf5..00f71331c 100644
--- a/config/default/common/config/wv.json/measurements/Ozone.json
+++ b/config/default/common/config/wv.json/measurements/Ozone.json
@@ -82,8 +82,12 @@
"settings": [
"TEMPO_L2_Ozone_Column_Amount_Granule",
"TEMPO_L2_Ozone_Cloud_Fraction_Granule",
+ "TEMPO_L2_Ozone_Profile_Total_Column_Granule",
+ "TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule",
"TEMPO_L3_Ozone_Column_Amount",
- "TEMPO_L3_Ozone_Cloud_Fraction"
+ "TEMPO_L3_Ozone_Cloud_Fraction",
+ "TEMPO_L3_Ozone_Profile_Total_Column",
+ "TEMPO_L3_Ozone_Profile_Troposphere_Column"
]
},
"MERRA-2": {
diff --git a/e2e/features/layers/layer-picker-test.spec.js b/e2e/features/layers/layer-picker-test.spec.js
index bf3948566..26832bc8c 100644
--- a/e2e/features/layers/layer-picker-test.spec.js
+++ b/e2e/features/layers/layer-picker-test.spec.js
@@ -45,7 +45,7 @@ test('"Unavailable" layers show unavailable icon and tooltip', async () => {
test('Entering search text transitions to search mode', async () => {
const { layersSearchField, layersSearchRow } = selectors
await layersSearchField.fill('ozone')
- await expect(layersSearchRow).toHaveCount(16)
+ await expect(layersSearchRow).toHaveCount(20)
})
test('Updating input changes results', async () => {
diff --git a/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Total_Column_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Total_Column_Granule.jpg
new file mode 100644
index 000000000..f7df4dcd0
Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Total_Column_Granule.jpg differ
diff --git a/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.jpg
new file mode 100644
index 000000000..2d4c23d55
Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Profile_Troposphere_Column_Granule.jpg differ
diff --git a/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Total_Column.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Total_Column.jpg
new file mode 100644
index 000000000..16ea81def
Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Total_Column.jpg differ
diff --git a/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Troposphere_Column.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Troposphere_Column.jpg
new file mode 100644
index 000000000..169bdc842
Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Profile_Troposphere_Column.jpg differ