Interactive interface for browsing global, full-resolution satellite imagery
Added Reference DOI to Surface Water Extent layer and fixed some 404 links
minniewong81701f3c793f
diff --git a/config/default/common/config/metadata/layers/goes/GOES-East_ABI_Air_Mass.md b/config/default/common/config/metadata/layers/goes/GOES-East_ABI_Air_Mass.mdindex 35767570f..a32b144ae 100644--- a/config/default/common/config/metadata/layers/goes/GOES-East_ABI_Air_Mass.md+++ b/config/default/common/config/metadata/layers/goes/GOES-East_ABI_Air_Mass.md@@ -4,4 +4,4 @@ The Air Mass layer from the GOES-East Advanced Baseline Imager (ABI) is used priThe Geostationary Operational Environmental Satellites (GOES)-East satellite (currently, GOES-16) is centered on 75.2 degrees W, covering the Conterminous US, Canada, Central and South America. The GOES-East ABI imagery is available on a rolling 90-day basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km, the temporal resolution is 10 minutes, and the latency (time from satellite acqusition to availability in GIBS) is approximately 40 minutes.-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)+References: [GOES-R: Air Mass RGB Quick Guide](https://rammb.cira.colostate.edu/training/visit/quick_guides/QuickGuide_GOESR_AirMassRGB_final.pdf)diff --git a/config/default/common/config/metadata/layers/goes/GOES-West_ABI_Air_Mass.md b/config/default/common/config/metadata/layers/goes/GOES-West_ABI_Air_Mass.mdindex 5b9dcc303..3966619db 100644--- a/config/default/common/config/metadata/layers/goes/GOES-West_ABI_Air_Mass.md+++ b/config/default/common/config/metadata/layers/goes/GOES-West_ABI_Air_Mass.md@@ -4,4 +4,4 @@ The Air Mass layer from the GOES-West Advanced Baseline Imager (ABI) is used priThe Geostationary Operational Environmental Satellites (GOES)-West satellite (currently, GOES-18) is centered on 137.2 degrees W, covering most of the Pacific Ocean, the USA, most of Canada, Central America, the western half of South America, and parts of Australasia. The GOES-West ABI imagery is available on a rolling 90-day basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km, the temporal resolution is 10 minutes, and the latency (time from satellite acqusition to availability in GIBS) is approximately 40 minutes.-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)+References: [GOES-R: Air Mass RGB Quick Guide](https://rammb.cira.colostate.edu/training/visit/quick_guides/QuickGuide_GOESR_AirMassRGB_final.pdf)diff --git a/config/default/common/config/metadata/layers/himawari/Himawari_AHI_Air_Mass.md b/config/default/common/config/metadata/layers/himawari/Himawari_AHI_Air_Mass.mdindex 5af762782..c1808fc4a 100644--- a/config/default/common/config/metadata/layers/himawari/Himawari_AHI_Air_Mass.md+++ b/config/default/common/config/metadata/layers/himawari/Himawari_AHI_Air_Mass.md@@ -4,4 +4,4 @@ The Air Mass layer from the Himawari-8 Advanced Himawari Imager (AHI) is used prThe Himawari-8 satellite is centered on 140.7 degrees E, covering most of the Pacific Ocean, a portion of Eastern Asia, and parts of Australasia. The Himawari-8 AHI imagery is available on a rolling 90-day basis at 10 minute intervals. The sensor resolution is 2 km, the imagery resolution in Worldview/Global Imagery Browse Services (GIBS) is 2 km, the temporal resolution is 10 minutes, and the latency (time from satellite acqusition to availability in GIBS) is approximately 40 minutes.-References: [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf)+References: [GOES-R: Air Mass RGB Quick Guide](https://rammb.cira.colostate.edu/training/visit/quick_guides/QuickGuide_GOESR_AirMassRGB_final.pdf)diff --git a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.mdindex ec3ff1386..b15de630a 100644--- a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md+++ b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Day.md@@ -2,4 +2,4 @@ The Microwave Limb Sounder (MLS) Carbon Monoxide (CO) Mixing Ratio layer at 215The MLS Carbon Monoxide (CO) Mixing Ratio 215hPa layer is derived from the MLS Carbon Monoxide product (ML2CO_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V005/summary)+References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_005/summary)diff --git a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.mdindex 1d65a1836..2b19d13fc 100644--- a/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md+++ b/config/default/common/config/metadata/layers/mls/MLS_CO_215hPa_Night.md@@ -2,4 +2,4 @@ The Microwave Limb Sounder (MLS) Carbon Monoxide (CO) Mixing Ratio layer at 215The MLS Carbon Monoxide (CO) Mixing Ratio 215hPa layer is derived from the MLS Carbon Monoxide product (ML2CO_NRT) available from the Microwave Limb Sounder (MLS) instrument on the Aura satellite. The sensor resolution is 5 km, imagery resolution is 2 km, and the temporal resolution is daily.-References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_V005/summary)\ No newline at end of file+References: [ML2CO_NRT](https://disc.gsfc.nasa.gov/datasets/ML2CO_NRT_005/summary)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day_TES.mdindex 2e2bb2a1b..ded70224b 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, 8-Day, Day) layer is from the new Land SurfaceThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is 8 days.diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night_TES.mdindex 61f700d6b..1a8fefd01 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_8Day_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, 8-Day, Night) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is 8 days.diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day_TES.mdindex 5e3ec6b6d..8759dffc9 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Daily, Day) layer is from the new Land SurfaceThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21A1D dataset is produced daily from daytime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MYD21](https://doi.org/10.5067/MODIS/MYD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through all these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having observation coverage more than a certain threshold (15%) are considered for this averaging. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)] (https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21A1D dataset is produced daily from daytime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MYD21](https://doi.org/10.5067/MODIS/MYD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through all these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having observation coverage more than a certain threshold (15%) are considered for this averaging. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)] (https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night_TES.mdindex 58639a280..fa47127d3 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Daily_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Daily, Night) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21A1N dataset is produced daily from nighttime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MYD21](https://doi.org/10.5067/MODIS/MYD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through all these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The nighttime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21A1N dataset is produced daily from nighttime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MYD21](https://doi.org/10.5067/MODIS/MYD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through all these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The nighttime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.mdindex 7a9a12c11..f2e329d16 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Monthly, Day) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21C3 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21C3 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is monthly.diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.mdindex 818b41898..c8f79dc6f 100644--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Monthly, Night) layer is from the new Land SurThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MYD21C3 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MYD21C3 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MYD21A1D](https://doi.org/10.5067/MODIS/MYD21A1D.061) and [MYD21A1N](https://doi.org/10.5067/MODIS/MYD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is monthly.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day_TES.mdindex b348379fc..be5a3cbaf 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, 8-Day, Day) layer is from the new Land SurfaceThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is 8 days.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night_TES.mdindex f100cbdfd..f62f1bab2 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_8Day_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, 8-Day, Night) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21A2 dataset is an 8-day composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is 8 days.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day_TES.mdindex f4d46b10a..bb2c80303 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Daily, Day) layer is from the new Land SurfaceThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21A1D dataset is produced daily from daytime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MOD21](https://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21A1D dataset is produced daily from daytime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MOD21](https://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The daytime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and temporal resolution is daily.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night_TES.mdindex 69e53f62b..2ea13bd94 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Daily_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Daily, Night) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21A1N dataset is produced daily from nighttime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MOD21](https://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The nighttime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21A1N dataset is produced daily from nighttime Level 2 Gridded (L2G) intermediate LST products. The L2G process maps the daily [MOD21](https://doi.org/10.5067/MODIS/MOD21.061) swath granules onto a sinusoidal MODIS grid and stores all observations falling over a gridded cell for a given day. The MOD21A1 algorithm sorts through these observations for each cell and estimates the final LST value as an average from all observations that are cloud free and have good LST&E accuracies. The nighttime average is weighted by the observation coverage for that cell. Only observations having an observation coverage greater than a 15% threshold are considered. Additional details regarding the methodology used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is daily.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.mdindex 0b04f789c..37ec143f1 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Day_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Monthly, Day) layer is from the new Land SurfaThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21C3 dataset is a monthly composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21C3 dataset is a monthly composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is monthly.diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.mdindex eaf056b4b..a5aea10d4 100644--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L3_Land_Surface_Temp_Monthly_CMG_Night_TES.md@@ -2,7 +2,7 @@ The Land Surface Temperature (L3, Monthly, Night) layer is from the new Land SurThe MOD/MYD21 Temperature/Emissivity Separation (TES) algorithm is a physics-based algorithm used to dynamically retrieve both LST and spectral emissivity simultaneously from the MODIS thermal infrared (TIR) bands 29, 31, and 32. The TES algorithm is combined with an improved Water Vapor Scaling (WVS) atmospheric correction scheme to stabilize the retrieval during warm and humid conditions. The MOD/MYD21 LST&E algorithm differs from the MOD11/MYD11 L2 algorithm in that the MOD21/MYD21 algorithm is based on the ASTER TES technique, whereas the MOD11/MYD11 L2 products uses a generalized split-window (GSW) technique. MOD/MYD21 addresses the 3-5 K cold bias over desert regions that currently exists with the MOD/MYD11 LST product, and using the TES algorithm allows a dynamical retrieval of land surface emissivity for all MODIS TIR bands 29, 31, and 32. Users are encourage to read the [current validation status report](https://modis-land.gsfc.nasa.gov/pdf/MOD21_MOD11_report.pdf) to better understand differences between these two products.-The MOD21C3 dataset is a monthly composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/107/MOD21_ATBD.pdf).+The MOD21C3 dataset is a monthly composite LST product that uses an algorithm based on a simple averaging method. The algorithm calculates the average from all the cloud free [MOD21A1D](https://doi.org/10.5067/MODIS/MOD21A1D.061) and [MOD21A1N](https://doi.org/10.5067/MODIS/MOD21A1N.061) daily acquisitions from the 8-day period. Additional details regarding the method used to create this Level 3 (L3) product are available in the Algorithm Theoretical Basis Document [(ATBD)](https://lpdaac.usgs.gov/documents/1399/MOD21_ATBD.pdf).The MODIS Land Surface Temperature product is available from both Terra (MOD21) and Aqua (MYD21) satellites. The sensor and imagery resolution is 1 km, and the temporal resolution is monthly.diff --git a/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS_Provisional.md b/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS_Provisional.mdindex fd7a55512..04608b3d4 100644--- a/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS_Provisional.md+++ b/config/default/common/config/metadata/layers/multi-mission/opera/OPERA_L3_Dynamic_Surface_Water_Extent-HLS_Provisional.md@@ -1 +1,3 @@-The OPERA Dynamic Surface Water Extent Provisional imagery layer is a Level-3 (L3) product that maps surface water every few days. The resolution is 30 m and the layer has 5 classifications: Not Water, Open Water, Partial Surface Water, Snow/Ice, and Cloud/Cloud Shadow. The input dataset for generating each product is the Harmonized Landsat Sentinel-2 (HLS) dataset. The OPERA Dynamic Surface Water Extent Provisional (L3) imagery layer is available through the Observational Products for End-Users from Remote Sensing Analysis (OPERA) project.\ No newline at end of file+The OPERA Dynamic Surface Water Extent Provisional imagery layer is a Level-3 (L3) product that maps surface water every few days. The resolution is 30 m and the layer has 5 classifications: Not Water, Open Water, Partial Surface Water, Snow/Ice, and Cloud/Cloud Shadow. The input dataset for generating each product is the Harmonized Landsat Sentinel-2 (HLS) dataset. The OPERA Dynamic Surface Water Extent Provisional (L3) imagery layer is available through the Observational Products for End-Users from Remote Sensing Analysis (OPERA) project.++References: OPERA_L3_DSWX-HLS_PROVISIONAL_V1 [doi:10.5067/OPDSW-PL3V1](https://doi.org/10.5067/OPDSW-PL3V1)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.mdindex f9a51b943..fe9148d85 100644--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md@@ -1,3 +1,3 @@The OCO-2 Carbon Dioxide (Difference from Global Mean) is a layer that combines OCO-2 XCO<sub>2</sub> (column-averaged dry-air mole fraction) and an estimated daily global trend XCO<sub>2</sub> value that is produced by the National Oceanic and Atmospheric Administration Earth System Research Laboratory Global Monitoring Division (NOAA ESRL GMD). It is calculated from daily averaged CO<sub>2</sub> data from four surface stations and is subtracted from the OCO-2 XCO<sub>2</sub> in order to provide a product that visualizes smaller variations in XCO<sub>2</sub> than the raw XCO<sub>2</sub> product. This is done because increasing atmospheric CO<sub>2</sub> concentrations has resulted in a large range of XCO<sub>2</sub> values over the OCO-2 record.-References: OCO2_L2_Lite_FP [doi:10.5067/5Q8JLZL1VD4A](https://doi.org/10.5067/5Q8JLZL1VD4A); [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)+References: OCO2_L2_Lite_FP [doi:10.5067/5Q8JLZL1VD4A](https://doi.org/10.5067/5Q8JLZL1VD4A); [NOAA - What is the Global Greenhouse Gas Reference Network?](https://gml.noaa.gov/ccgg/about.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)diff --git a/config/default/common/config/metadata/stories/geostationary/step008.md b/config/default/common/config/metadata/stories/geostationary/step008.mdindex 96509228f..ae5fe29b2 100644--- a/config/default/common/config/metadata/stories/geostationary/step008.md+++ b/config/default/common/config/metadata/stories/geostationary/step008.md@@ -1,3 +1,3 @@The Air Mass layer is used primarily for distinguishing between polar and tropical air masses, especially along frontal boundaries and to identify high, mid, and low-level clouds. It can also be used to infer cyclogenesis by identifying warm, dry, ozone-rich descending stratospheric air associated with jet streams and potential vorticity (PV) anomalies. This imagery is at 2 km resolution. This imagery is available on a rolling 30 day basis from the GOES-East, GOES-West, and Himawari-8 satellites. Typhoon Mindulle is shown here on 1 October 2021 at 00:00 UTC, approaching Japan. In the center of the storm are high thick clouds in white, the dark red/orange area on the western side of the storm are jet stream/PV/deformation zones/dry upper level, and the green tinted areas show warm air masses.-Read the [GOES-R: Air Mass RGB Quick Guide](https://nasasporttraining.files.wordpress.com/2015/12/quickguide_airmassrgb_nasa_sport.pdf) for more information on how to interpret the colors in the imagery.\ No newline at end of file+Read the [GOES-R: Air Mass RGB Quick Guide](https://rammb.cira.colostate.edu/training/visit/quick_guides/QuickGuide_GOESR_AirMassRGB_final.pdf) for more information on how to interpret the colors in the imagery.\ No newline at end of file