Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

relative humidity, LAI, Liquid water equivalent updates

minniewong843f9a177923
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Day.md
index 29f06bb65..0a932f8f2 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Day.md
@@ -1,13 +1,12 @@
-#### Description
-Atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level. Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices, and by the decay of organic waste. Wildfires also contribute to methane emissions. Methane concentration is higher in the northern hemisphere because most sources (both natural and human) are located on land. Known sources of methane are predominantly located near Earth's surface, but with vertical atmospheric mixing and methane's approximate 9-year lifetime it is considered to be a well-mixed gas (meaning the concentration of methane is taken to be constant with respect to height within the troposphere). Methane concentrations can vary seasonally.
+The Methane (L2, 400 hPa, Day) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 7)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `CH4VMRLevStd`; pressure level at element 8<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Night.md
index 29f06bb65..d05ec2a22 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Methane_400hPa_Volume_Mixing_Ratio_Night.md
@@ -1,13 +1,12 @@
-#### Description
-Atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level. Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices, and by the decay of organic waste. Wildfires also contribute to methane emissions. Methane concentration is higher in the northern hemisphere because most sources (both natural and human) are located on land. Known sources of methane are predominantly located near Earth's surface, but with vertical atmospheric mixing and methane's approximate 9-year lifetime it is considered to be a well-mixed gas (meaning the concentration of methane is taken to be constant with respect to height within the troposphere). Methane concentrations can vary seasonally.
+The Methane (L2, 400 hPa, Night) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 7)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `CH4VMRLevStd`; pressure level at element 8<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,6 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Day.md
index e75ba6ca7..fac0cfb3a 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Day.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of the air in units of percent at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and the Earth's surface move in roughly the same direction as winds at the 500 hPa level.
+The Relative Humidity (L2, 500 hPa, Day) layer displays relative humidity of the air in units of percent at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and the Earth's surface move in roughly the same direction as winds at the 500 hPa level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 7<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Night.md
index e75ba6ca7..1a15e1144 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_500hPa_Night.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of the air in units of percent at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and the Earth's surface move in roughly the same direction as winds at the 500 hPa level.
+The Relative Humidity (L2, 500 hPa, Night) layer displays relative humidity of the air in units of percent at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and the Earth's surface move in roughly the same direction as winds at the 500 hPa level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 7<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,4 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Day.md
index a52621889..77a492a1e 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Day.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of the air in units of percent at the 700 hPa pressure level, approximately 3000 meters (10,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. Roughly one third of the mass of Earth's atmosphere is found between the surface and this level. This level reflects wind patterns that steer individual thunderstorms, so it is often used by meteorologists for predicting thunderstorm motion and intensification.
+The Relative Humidity (L2, 700 hPa, Day) layer displays relative humidity of the air in units of percent at the 700 hPa pressure level, approximately 3000 meters (10,000 feet) above sea level. Roughly one third of the mass of Earth's atmosphere is found between the surface and this level. This level reflects wind patterns that steer individual thunderstorms, so it is often used by meteorologists for predicting thunderstorm motion and intensification.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 5<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,5 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Night.md
index a52621889..b256fe280 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_700hPa_Night.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of the air in units of percent at the 700 hPa pressure level, approximately 3000 meters (10,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. Roughly one third of the mass of Earth's atmosphere is found between the surface and this level. This level reflects wind patterns that steer individual thunderstorms, so it is often used by meteorologists for predicting thunderstorm motion and intensification.
+The Relative Humidity (L2, 700 hPa, Night) layer displays relative humidity of the air in units of percent at the 700 hPa pressure level, approximately 3000 meters (10,000 feet) above sea level. Roughly one third of the mass of Earth's atmosphere is found between the surface and this level. This level reflects wind patterns that steer individual thunderstorms, so it is often used by meteorologists for predicting thunderstorm motion and intensification.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 5<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,5 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Day.md
index 28f773945..0f280d390 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Day.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity in units of per cent at the 850 hPa pressure, approximately 1500 meters (5000 feet) above sea level and often just above the boundary layer. Relative humidity is a measurement of water vapor relative to the temperature of the air and it is dependent upon temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. The higher the relative humidity, the more moist the air, which is vital for the development of clouds and precipitation. AIRS relative humidity is derived from AIRS temperature and water vapor and it's calculated as ratios of retrieved specific humidity mixing ratios and temperature-dependent saturation mixing ratios. AIRS relative humidity is relative to the stable phase of water, taking into account the phase change from liquid to ice in a freezing layer.
+The Relative Humidity (L2, 800 hPa, Day) layer displays relative humidity in units of per cent at the 850 hPa pressure, approximately 1500 meters (5000 feet) above sea level and often just above the boundary layer. Relative humidity is a measurement of water vapor relative to the temperature of the air and it is dependent upon temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. The higher the relative humidity, the more moist the air, which is vital for the development of clouds and precipitation. AIRS relative humidity is derived from AIRS temperature and water vapor and it's calculated as ratios of retrieved specific humidity mixing ratios and temperature-dependent saturation mixing ratios. AIRS relative humidity is relative to the stable phase of water, taking into account the phase change from liquid to ice in a freezing layer.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 4<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,5 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Night.md
index 28f773945..98aee343b 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_RelativeHumidity_850hPa_Night.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity in units of per cent at the 850 hPa pressure, approximately 1500 meters (5000 feet) above sea level and often just above the boundary layer. Relative humidity is a measurement of water vapor relative to the temperature of the air and it is dependent upon temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. The higher the relative humidity, the more moist the air, which is vital for the development of clouds and precipitation. AIRS relative humidity is derived from AIRS temperature and water vapor and it's calculated as ratios of retrieved specific humidity mixing ratios and temperature-dependent saturation mixing ratios. AIRS relative humidity is relative to the stable phase of water, taking into account the phase change from liquid to ice in a freezing layer.
+The Relative Humidity (L2, 800 hPa, Night) layer displays relative humidity in units of per cent at the 850 hPa pressure, approximately 1500 meters (5000 feet) above sea level and often just above the boundary layer. Relative humidity is a measurement of water vapor relative to the temperature of the air and it is dependent upon temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. The higher the relative humidity, the more moist the air, which is vital for the development of clouds and precipitation. AIRS relative humidity is derived from AIRS temperature and water vapor and it's calculated as ratios of retrieved specific humidity mixing ratios and temperature-dependent saturation mixing ratios. AIRS relative humidity is relative to the stable phase of water, taking into account the phase change from liquid to ice in a freezing layer.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 6)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHum`; pressure level at element 4<br>
Resolution: 45 km/pixel at nadir
@@ -17,9 +16,5 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Day.md
index 733610136..05a83c564 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Day.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of air in units of percent, located two meters (6.5 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios.
+The Surface Relative Humidity (L2, Day) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 7)<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHumSurf`<br>
Resolution: 45 km/pixel at nadir
@@ -16,9 +15,6 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Night.md
index 733610136..638ad38f7 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L2_Surface_Relative_Humidity_Night.md
@@ -1,13 +1,12 @@
-#### Description
-Relative humidity of air in units of percent, located two meters (6.5 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios.
+The Surface Relative Humidity (L2, Night) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
#### Image Resolution
32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
#### Data Product
Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
+Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product Version 7<br>
+Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product Version 6)<br>
Field name: `RelHumSurf`<br>
Resolution: 45 km/pixel at nadir
@@ -16,9 +15,4 @@ Overpasses: Twice daily (day and night)<br>
Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-#### About AIRS
-AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
-
-More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
+Data Product: [AIRS2RET_NRT](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_006/summary); AIRS2RET [doi:10.5067/Aqua/AIRS/DATA202](https://doi.org/10.5067/Aqua/AIRS/DATA202)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md
index 5eb1a4615..1ab783f1a 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Day.md
@@ -2,7 +2,6 @@ The Carbon Monoxide (L3, 500hPa, Day, Daily) layer displays carbon monoxide in u
#### Data Product
Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
-Field name: `COVMRLevStd`; pressure level is at element 7<br>
Resolution: 1 X 1 degree
#### Coverage
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md
index 039818e60..6b8446e24 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Daily_Night.md
@@ -2,7 +2,6 @@ The Carbon Monoxide (L3, 500hPa, Night, Daily) layer displays carbon monoxide in
#### Data Product
Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
-Field name: `COVMRLevStd`; pressure level is at element 7<br>
Resolution: 1 X 1 degree
#### Coverage
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md
index b2dbbc06c..1215cf329 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Day.md
@@ -1,17 +1,11 @@
The Carbon Monoxide (L3, 500hPa, Day, Monthly) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.
-#### Image Resolution
-32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
-
#### Data Product
Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
-Field name: `COVMRLevStd`; pressure level is at element 7<br>
Resolution: 1 X 1 degree
#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+Spatial Coverage: Global
#### References
Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md
index 80484110e..a8c49f58b 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Carbon_Monoxide_500hPa_Volume_Mixing_Ratio_Monthly_Night.md
@@ -1,17 +1,11 @@
The Carbon Monoxide (L3, 500hPa, Night, Monthly) layer displays carbon monoxide in units of parts per billion by volume at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level.
-#### Image Resolution
-32 km/pixel (AIRS Level 2 data is nominally 45 km/pixel at the equator and the data has been resampled into a 32 km/pixel visualization.)
-
#### Data Product
Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
-Field name: `COVMRLevStd`; pressure level is at element 7<br>
Resolution: 1 X 1 degree
#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+Spatial Coverage: Global
#### References
Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Day.md
index 8b1378917..0bee5f905 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Day.md
@@ -1 +1,13 @@
+The Methane (L3, 400 hPa, Day, Daily) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
+#### Data Product
+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global<br>
+Overpasses: Twice daily (day and night)<br>
+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+
+#### References
+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Night.md
index e69de29bb..7e151b132 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Daily_Night.md
@@ -0,0 +1,13 @@
+The Methane (L3, 400 hPa, Night, Daily) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
+
+#### Data Product
+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global<br>
+Overpasses: Twice daily (day and night)<br>
+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+
+#### References
+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Day.md
index 8b1378917..369d10077 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Day.md
@@ -1 +1,11 @@
+The Methane (L3, 400 hPa, Day, Monthly) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
+#### Data Product
+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global
+
+#### References
+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Night.md
index 8b1378917..6b2acb54e 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Methane_400hPa_Volume_Mixing_Ratio_Monthly_Night.md
@@ -1 +1,11 @@
+The Methane (L3, 400 hPa, Night, Monthly) layer displays atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level.
+#### Data Product
+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global
+
+#### References
+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Day.md
index 8b1378917..bb952434a 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Day.md
@@ -1 +1,15 @@
+The Surface Relative Humidity (L3, Day, Daily) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
+
+### Data Product
+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global<br>
+Overpasses: Twice daily (day and night)<br>
+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+
+#### References
+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)
+
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Night.md
index e69de29bb..962e3a903 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Daily_Night.md
@@ -0,0 +1,13 @@
+The Surface Relative Humidity (L3, Night, Daily) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
+
+### Data Product
+Science Quality Product: `AIRS3STD` (AIRS-Only Level 3 Daily Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global<br>
+Overpasses: Twice daily (day and night)<br>
+Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
+
+#### References
+Data Product: AIRS3STD [doi:10.5067/Aqua/AIRS/DATA303](https://doi.org/10.5067/Aqua/AIRS/DATA303)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Day.md
index 8b1378917..f1a8c0852 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Day.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Day.md
@@ -1 +1,11 @@
+The Surface Relative Humidity (L3, Day, Monthly) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
+### Data Product
+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global
+
+#### References
+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Night.md
index e69de29bb..76f65b387 100644
--- a/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Night.md
+++ b/config/default/common/config/metadata/layers/airs/AIRS_L3_Surface_Relative_Humidity_Monthly_Night.md
@@ -0,0 +1,11 @@
+The Surface Relative Humidity (L3, Night, Monthly) layer displays relative humidity of air in units of percent, located two meters (6.5 feet) above sea level.
+
+### Data Product
+Science Quality Product: `AIRS3STM` (AIRS-Only Level 3 Monthly Standard Product)<br>
+Resolution: 1 X 1 degree
+
+#### Coverage
+Spatial Coverage: Global
+
+#### References
+Data Product: AIRS3STM [doi:10.5067/Aqua/AIRS/DATA321](https://doi.org/10.5067/Aqua/AIRS/DATA321)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Day.md
deleted file mode 100644
index 87b96bf0a..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (500 hPa, Day) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Night.md
deleted file mode 100644
index 9ae9f12d6..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_500hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (500 hPa, Night) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Day.md
deleted file mode 100644
index 6631f79da..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (700 hPa, Day) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Night.md
deleted file mode 100644
index 63c637b31..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_700hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (700 hPa, Night) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Day.md
deleted file mode 100644
index 1af6526d7..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (850 hPa, Day) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Night.md
deleted file mode 100644
index 45a89b540..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_RelativeHumidity_850hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Relative Humidity (800 hPa, Night) layer indicates the percent relative humidity at varying pressure levels measured in hectopascals (hPa). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Relative Humidity layer is available at 500hPa, 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Day.md
deleted file mode 100644
index 118e5b426..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (500 hPa, Day) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Night.md
deleted file mode 100644
index 07dad016a..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_500hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (500 hPa, Night) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Day.md
deleted file mode 100644
index 9cdf8dbb3..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (700 hPa, Day) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Night.md
deleted file mode 100644
index 5b6e9e335..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_700hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (700 hPa, Night) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Day.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Day.md
deleted file mode 100644
index 200acd9be..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Day.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (850 hPa, Day) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Night.md b/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Night.md
deleted file mode 100644
index f932ad5c7..000000000
--- a/config/default/common/config/metadata/layers/airs/AIRS_Temperature_850hPa_Night.md
+++ /dev/null
@@ -1,5 +0,0 @@
-The AIRS Temperature (850 hPa, Night) layer indicates the air temperature at varying pressure levels, measured in Kelvin (K). The vertical profile information produced by the AIRS instrument augments radiosonde data. Most radiosonde launch stations are situated on land, and the AIRS instrument improves this information as it can provide data for locations all over the globe such as large swaths of the ocean that do not have any regular measurements taken. The Temperature layer is available at 500hPa (hectopascals), 700hPa, 850hPa. 500hPa is approximately 5.5 km or 18,000 feet, 700hPa is approximately 3 km or 10,000 feet and 850hPa is approximately 1.5 km or 5,000 feet. This information helps improve world weather observing and in improving the skill in making mid and long range weather forecast.
-
-The Atmospheric Infrared Sounder (AIRS) is an instrument on board the Aqua satellite. The AIRS Relative Humidity science parameter is a parameter of the AIRS Level 2 Near Real Time standard retrieval product using AIRS (AIRS2RET_NRT). The imagery resolution is 2 km and sensor resolution is 45 km. The temporal resolution is daily.
-
-References: [GES DISC - AIRS2RET_NRT: AIRS/Aqua L2 Near Real Time (NRT) Standard Physical Retrieval (AIRS-only) V006](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_NRT_V006/summary?AIRS2RET_NRT); [GES DISC - Near Real-Time Data](https://disc.gsfc.nasa.gov/information/glossary?title=Near%20Real-Time%20Data); [NOAA National Weather Service - Radiosonde Observations](https://www.weather.gov/upperair/factsheet); [AIRS - Geophysical products of Earth's atmosphere and surface](https://airs.jpl.nasa.gov/data/products/geophysical/)
diff --git a/config/default/common/config/metadata/layers/airs/Methane.md b/config/default/common/config/metadata/layers/airs/Methane.md
index 9ef52e5b5..dbafc281d 100644
--- a/config/default/common/config/metadata/layers/airs/Methane.md
+++ b/config/default/common/config/metadata/layers/airs/Methane.md
@@ -1,31 +1,9 @@
-### Methane (L2, 400 hPa, Day | Night)
-Temporal coverage: 30 August 2002 - Present
-
-#### Description
-Atmospheric methane in units of parts per billion by volume at the 400 hPa pressure level, approximately 7200 meters (24,000 feet) above sea level. Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices, and by the decay of organic waste. Wildfires also contribute to methane emissions. Methane concentration is higher in the northern hemisphere because most sources (both natural and human) are located on land. Known sources of methane are predominantly located near Earth's surface, but with vertical atmospheric mixing and methane's approximate 9-year lifetime it is considered to be a well-mixed gas (meaning the concentration of methane is taken to be constant with respect to height within the troposphere). Methane concentrations can vary seasonally.
-
-#### Image Resolution
-Nominal equatorial image resolution 31.25 km/pixel; imagery displayed in Worldview/Global Imagery Browse Services (GIBS) is 2 km.
-
-#### Data Product
-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
-Field name: `CH4VMRLevStd`; pressure level at element 8<br>
-Resolution: 45 km/pixel at nadir
-
-#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
-
-#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+#### About Methane
+Methane is emitted during the production and transport of coal, natural gas, and oil. Methane emissions also result from livestock and other agricultural practices, and by the decay of organic waste. Wildfires also contribute to methane emissions. Methane concentration is higher in the northern hemisphere because most sources (both natural and human) are located on land. Known sources of methane are predominantly located near Earth's surface, but with vertical atmospheric mixing and methane's approximate 9-year lifetime it is considered to be a well-mixed gas (meaning the concentration of methane is taken to be constant with respect to height within the troposphere). Methane concentrations can vary seasonally.
#### About AIRS
AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
-### Methane (L3, 400 hPa, Day | Night, Daily | Monthly)
-Temporal coverage: 1 September 2002 - present or most recent complete month
+
diff --git a/config/default/common/config/metadata/layers/airs/RelativeHumidity.md b/config/default/common/config/metadata/layers/airs/RelativeHumidity.md
index abfb5b3e5..798d5e239 100644
--- a/config/default/common/config/metadata/layers/airs/RelativeHumidity.md
+++ b/config/default/common/config/metadata/layers/airs/RelativeHumidity.md
@@ -1,102 +1,7 @@
-### Relative Humidity (L2, 500 hPa, Day | Night)
-Temporal coverage: 30 August 2002 - Present
-
-#### Description
-Relative humidity of the air in units of percent at the 500 hPa pressure level, approximately 5500 meters (18,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. The 500 hPa pressure level is near the divide between upper and lower halves of atmospheric mass and is often referred to as a steering level. Many midlatitude weather systems between this level and the Earth's surface move in roughly the same direction as winds at the 500 hPa level.
-
-#### Image Resolution
-Nominal equatorial image resolution 31.25 km/pixel; imagery displayed in Worldview/Global Imagery Browse Services (GIBS) is 2 km.
-
-#### Data Product
-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
-Field name: `RelHum`; pressure level at element 7<br>
-Resolution: 45 km/pixel at nadir
-
-#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
-
-#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-### Relative Humidity (L2, 700 hPa, Day | Night)
-Temporal coverage: 30 August 2002 - Present
-
-#### Description
-Relative humidity of the air in units of percent at the 700 hPa pressure level, approximately 3000 meters (10,000 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios. Roughly one third of the mass of Earth's atmosphere is found between the surface and this level. This level reflects wind patterns that steer individual thunderstorms, so it is often used by meteorologists for predicting thunderstorm motion and intensification.
-
-#### Image Resolution
-Nominal equatorial image resolution 31.25 km/pixel
-
-#### Data Product
-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
-Field name: `RelHum`; pressure level at element 5<br>
-Resolution: 45 km/pixel at nadir
-
-#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
-
-#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-### Relative Humidity (L2, 850 hPa, Day | Night)
-Temporal coverage: 30 August 2002 - Present
-
-#### Description
-Relative humidity in units of per cent at the 850 hPa pressure, approximately 1500 meters (5000 feet) above sea level and often just above the boundary layer. Relative humidity is a measurement of water vapor relative to the temperature of the air and it is dependent upon temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. The higher the relative humidity, the more moist the air, which is vital for the development of clouds and precipitation. AIRS relative humidity is derived from AIRS temperature and water vapor and it's calculated as ratios of retrieved specific humidity mixing ratios and temperature-dependent saturation mixing ratios. AIRS relative humidity is relative to the stable phase of water, taking into account the phase change from liquid to ice in a freezing layer.
-
-#### Image Resolution
-Nominal equatorial image resolution 31.25 km/pixel
-
-#### Data Product
-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
-Field name: `RelHum`; pressure level at element 4<br>
-Resolution: 45 km/pixel at nadir
-
-#### Coverage
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
-
-#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
-
-### Surface Relative Humidity (L2, Day | Night)
-Temporal coverage: 30 August 2002 - Present
-
-#### Description
-Relative humidity of air in units of percent, located two meters (6.5 feet) above sea level. Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios.
-
-#### Image Resolution
-Nominal equatorial image resolution 31.25 km/pixel
-
-#### Data Product
-Image initially produced with NRT data. Science quality image replaces NRT when available.<br>
-Near Real-Time Product: `AIRS2RET_NRT` (AIRS-Only Level 2 Near Real-Time Product)<br>
-Science Quality Product: `AIRS2RET` (AIRS-Only Level 2 Standard Product)<br>
-Field name: `RelHumSurf`<br>
-Resolution: 45 km/pixel at nadir
-
-Spatial Coverage: Global<br>
-Overpasses: Twice daily (day and night)<br>
-Orbit: Sun-synchronous polar; Equatorial crossing local time: Daytime 1:30 pm, Nighttime 1:30 am
-
-#### References
-Data Product: [AIRS2RET](https://disc.gsfc.nasa.gov/datasets/AIRS2RET_7.0/summary)
+#### About Relative Humidity
+Relative humidity is the ratio of the amount of water vapor in air to the total amount of water vapor the air can hold at specified temperature and pressure. Warm air can hold more water vapor than cold air, so the same amount of water vapor results in higher relative humidity in cool air than in warm air. AIRS relative humidity is derived from AIRS temperature and water vapor and is calculated as the fraction of retrieved humidity mixing ratio and temperature-dependent saturation mixing ratios.
#### About AIRS
AIRS, in conjunction with the Advanced Microwave Sounding Unit (AMSU), senses emitted infrared and microwave radiation from Earth to provide a three-dimensional look at Earth's weather and climate. Working in tandem, the two instruments make simultaneous observations down to Earth's surface. With more than 2,000 channels sensing different regions of the atmosphere, the system creates a global, three-dimensional map of atmospheric temperature and humidity, cloud amounts and heights, greenhouse gas concentrations and many other atmospheric phenomena. Launched into Earth orbit in 2002, the AIRS and AMSU instruments fly onboard NASA's Aqua spacecraft and are managed by NASA's Jet Propulsion Laboratory in Pasadena, California.
More information about AIRS can be found at [https://airs.jpl.nasa.gov](https://airs.jpl.nasa.gov).
-
-### Surface Relative Humidity (L3, Day | Night, Daily | Monthly)
-Temporal coverage: 1 September 2002 - present or most recent complete month
diff --git a/config/default/common/config/metadata/layers/grace/LiquidWaterEquivalent.md b/config/default/common/config/metadata/layers/grace/LiquidWaterEquivalent.md
deleted file mode 100644
index 27f79fc65..000000000
--- a/config/default/common/config/metadata/layers/grace/LiquidWaterEquivalent.md
+++ /dev/null
@@ -1,6 +0,0 @@
-### Liquid Water Equivalent Thickness (Mascon, CRI)
-Temporal coverage: April 2002 - May 2017
-
-The Liquid Water Equivalent Thickness (Mascon, CRI) layer provides global water storage anomalies relative to a time-mean of monthly mass grids as derived from GRACE. This version employs a Coastal Resolution Improvement (CRI) filter that reduces leakage errors across coastlines. The storage anomalies are given in equivalent water thickness units (cm).
-
-References: [doi: 10.5067/TEMSC-3MJC6](https://doi.org/10.5067/TEMSC-3MJC6)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/merra/MERRA2_Relative_Humidity_After_Moist_700hPa_Monthly.md b/config/default/common/config/metadata/layers/merra/MERRA2_Relative_Humidity_After_Moist_700hPa_Monthly.md
index e69de29bb..7aae1b11b 100644
--- a/config/default/common/config/metadata/layers/merra/MERRA2_Relative_Humidity_After_Moist_700hPa_Monthly.md
+++ b/config/default/common/config/metadata/layers/merra/MERRA2_Relative_Humidity_After_Moist_700hPa_Monthly.md
@@ -0,0 +1,3 @@
+The Relative Humidity After Moist at 700hPa (Monthly) layer is created from the M2TMNPCLD (or tavgM_3d_cld_Np) data collection. M2TMNPCLD is a 3-dimensional monthly mean data collection in Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2). This collection consists of assimilations of cloud diagnostics on 42 pressure levels, such as updraft areal fraction, cloud fraction for radiation, in-cloud cloud liquid (or ice) for radiation, and mass fraction of cloud liquid (or ice) water. The information on the pressure levels can be found in the section 4.2 of the MERRA-2 File Specification document. The collection also includes variance of certain parameters. MERRA-2 is the latest version of global atmospheric reanalysis for the satellite era produced by NASA Global Modeling and Assimilation Office (GMAO) using the Goddard Earth Observing System Model (GEOS) version 5.12.4.
+
+References: M2TMNPCLD [doi:10.5067/J9R0LXGH48JR](https://doi.org/10.5067/J9R0LXGH48JR)
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/merra/RelativeHumidity.md b/config/default/common/config/metadata/layers/merra/RelativeHumidity.md
deleted file mode 100644
index a1c7954c8..000000000
--- a/config/default/common/config/metadata/layers/merra/RelativeHumidity.md
+++ /dev/null
@@ -1,2 +0,0 @@
-### Relative Humidity After Moist at 700hPa (Monthly)
-Temporal coverage: January 1980 - Present (most recent complete month)
diff --git a/config/default/common/config/metadata/layers/modis/LeafAreaIndex.md b/config/default/common/config/metadata/layers/modis/LeafAreaIndex.md
index 6b8eaa0bb..d86221a8c 100644
--- a/config/default/common/config/metadata/layers/modis/LeafAreaIndex.md
+++ b/config/default/common/config/metadata/layers/modis/LeafAreaIndex.md
@@ -1,10 +1 @@
-### MODIS (Terra/Aqua) Leaf Area Index (Level 4, 8-Day)
-Temporal coverage: 26 February 2000 - present (Terra); 4 July 2002 - present (Aqua)
-
-The Leaf Area Index (L4, 8-Day) layers are created from the MOD15A2H/MYD15A2H Moderate Resolution Imaging Spectroradiometer (MODIS) combined Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FPAR) product which is an 8-day composite dataset with 500 meter (m) pixel size. The algorithm chooses the “best” pixel available from all the acquisitions of the Terra sensor from within the 8-day period.
-
-LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-
-References: MOD15A2H [doi:10.5067/MODIS/MOD15A2H.061](https://doi.org/10.5067/MODIS/MOD15A2H.061); MYD15A2H [doi:10.5067/MODIS/MYD15A2H.061](https://doi.org/10.5067/MODIS/MYD15A2H.061)
-
NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
\ No newline at end of file
diff --git a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L4_LAI_8Day.md b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L4_LAI_8Day.md
index 47445e51a..fd5722327 100644
--- a/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L4_LAI_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/aqua/MODIS_Aqua_L4_LAI_8Day.md
@@ -2,6 +2,4 @@ The Leaf Area Index (L4, 8-Day) layer is created from the MYD15A2H Moderate Reso
LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
-
References: MYD15A2H [doi:10.5067/MODIS/MYD15A2H.061](https://doi.org/10.5067/MODIS/MYD15A2H.061)
diff --git a/config/default/common/config/metadata/layers/modis/combined/LeafAreaIndex.md b/config/default/common/config/metadata/layers/modis/combined/LeafAreaIndex.md
deleted file mode 100644
index 44ddab7ef..000000000
--- a/config/default/common/config/metadata/layers/modis/combined/LeafAreaIndex.md
+++ /dev/null
@@ -1,19 +0,0 @@
-### MODIS (Terra and Aqua) Leaf Area Index (Level 4, 4-Day)
-Temporal coverage: 4 July 2002 - present
-
-The Leaf Area Index (L4, 4-Day) layer is created from the MCD15A3H Moderate Resolution Imaging Spectroradiometer (MODIS) Level 4 Leaf Area Index (LAI) product which is a 4-day composite data set with 500 meter pixel size. The algorithm chooses the best pixel available from all the acquisitions of both MODIS sensors located on NASA’s Terra and Aqua satellites from within the 4-day period.
-
-LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-
-References: MCD15A3H [doi:10.5067/MODIS/MCD15A3H.061](https://doi.org/10.5067/MODIS/MCD15A3H.061)
-
-### MODIS (Terra and Aqua) Leaf Area Index (Level 4, 8-Day)
-Temporal coverage: 4 July 2002 - present
-
-The Leaf Area Index (L4, 8-Day) layer is created from the MCD15A2H Moderate Resolution Imaging Spectroradiometer (MODIS) Level 4 Leaf Area Index (LAI) product is an 8-day composite dataset with 500 meter pixel size. The algorithm chooses the best pixel available from all the acquisitions of both MODIS sensors located on NASA’s Terra and Aqua satellites from within the 8-day period.
-
-LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-
-References: MCD15A2H [doi:10.5067/MODIS/MCD15A2H.061](https://doi.org/10.5067/MODIS/MCD15A2H.061)
-
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_4Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_4Day.md
index 8639112ce..09b4ff6a8 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_4Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_4Day.md
@@ -2,6 +2,4 @@ The Leaf Area Index (L4, 4-Day) layer is created from the MCD15A3H Moderate Reso
LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
-
References: MCD15A3H [doi:10.5067/MODIS/MCD15A3H.061](https://doi.org/10.5067/MODIS/MCD15A3H.061)
diff --git a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_8Day.md b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_8Day.md
index d7d7a8e6a..8677609d7 100644
--- a/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/combined/MODIS_Combined_L4_LAI_8Day.md
@@ -2,6 +2,4 @@ The Leaf Area Index (L4, 8-Day) layer is created from the MCD15A2H Moderate Reso
LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
-
References: MCD15A2H [doi:10.5067/MODIS/MCD15A2H.061](https://doi.org/10.5067/MODIS/MCD15A2H.061)
diff --git a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L4_LAI_8Day.md b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L4_LAI_8Day.md
index 6ef95b83a..4440558d9 100644
--- a/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L4_LAI_8Day.md
+++ b/config/default/common/config/metadata/layers/modis/terra/MODIS_Terra_L4_LAI_8Day.md
@@ -2,6 +2,4 @@ The Leaf Area Index (L4, 8-Day) layer is created from the MOD15A2H Moderate Reso
LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies.
-NOTE: We are reprocessing the entire MODIS Land imagery archive to collection 6.1 but currently the imagery is a mix of collection 6 and collection 6.1. Most of the imagery from mid-May 2021 onwards is collection 6.1 and older imagery is collection 6.
-
References: MOD15A2H [doi:10.5067/MODIS/MOD15A2H.061](https://doi.org/10.5067/MODIS/MOD15A2H.061)
diff --git a/config/default/common/config/wv.json/measurements/Leaf Area Index.json b/config/default/common/config/wv.json/measurements/Leaf Area Index.json
index 4343161e1..56671c1ee 100644
--- a/config/default/common/config/wv.json/measurements/Leaf Area Index.json
+++ b/config/default/common/config/wv.json/measurements/Leaf Area Index.json
@@ -26,7 +26,7 @@
"Aqua and Terra/MODIS": {
"id": "aqua-terra-modis",
"title": "Aqua and Terra/MODIS",
- "description": "modis/combined/LeafAreaIndex",
+ "description": "modis/LeafAreaIndex",
"image": "",
"settings": [
"MODIS_Combined_L4_LAI_4Day",
diff --git a/config/default/common/config/wv.json/measurements/Liquid Water Equivalent.json b/config/default/common/config/wv.json/measurements/Liquid Water Equivalent.json
index 9e3042a6d..5e272d28f 100644
--- a/config/default/common/config/wv.json/measurements/Liquid Water Equivalent.json
+++ b/config/default/common/config/wv.json/measurements/Liquid Water Equivalent.json
@@ -8,7 +8,7 @@
"GRACE Tellus": {
"id": "grace-tellus",
"title": "GRACE Tellus",
- "description": "grace/LiquidWaterEquivalent",
+ "description": "",
"image": "",
"settings": [
"GRACE_Tellus_Liquid_Water_Equivalent_Thickness_Mascon_CRI"
diff --git a/config/default/common/config/wv.json/measurements/Relative Humidity.json b/config/default/common/config/wv.json/measurements/Relative Humidity.json
index fdefc9d59..543f2bb06 100644
--- a/config/default/common/config/wv.json/measurements/Relative Humidity.json
+++ b/config/default/common/config/wv.json/measurements/Relative Humidity.json
@@ -30,7 +30,7 @@
"MERRA-2": {
"id": "merra2",
"title": "MERRA-2",
- "description": "merra/RelativeHumidity",
+ "description": "",
"image": "",
"settings": [
"MERRA2_Relative_Humidity_After_Moist_700hPa_Monthly"