Skip to content

Interactive interface for browsing global, full-resolution satellite imagery

OCO-2 upgrade from version 10r to 11r

minniewong972b49c8f305
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md
index 976fabea8..f9a51b943 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Global_Mean_Difference.md
@@ -1,3 +1,3 @@
The OCO-2 Carbon Dioxide (Difference from Global Mean) is a layer that combines OCO-2 XCO<sub>2</sub> (column-averaged dry-air mole fraction) and an estimated daily global trend XCO<sub>2</sub> value that is produced by the National Oceanic and Atmospheric Administration Earth System Research Laboratory Global Monitoring Division (NOAA ESRL GMD). It is calculated from daily averaged CO<sub>2</sub> data from four surface stations and is subtracted from the OCO-2 XCO<sub>2</sub> in order to provide a product that visualizes smaller variations in XCO<sub>2</sub> than the raw XCO<sub>2</sub> product. This is done because increasing atmospheric CO<sub>2</sub> concentrations has resulted in a large range of XCO<sub>2</sub> values over the OCO-2 record.
-References: OCO2_L2_Lite_FP [doi:10.5067/E4E140XDMPO2](https://doi.org/10.5067/E4E140XDMPO2); [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)
+References: OCO2_L2_Lite_FP [doi:10.5067/5Q8JLZL1VD4A](https://doi.org/10.5067/5Q8JLZL1VD4A); [NOAA/ESRL - Global Greenhouse Gas Reference Network, Data Products and Visualization](https://www.esrl.noaa.gov/gmd/ccgg/data-products.html); [Ed Dlugokencky and Pieter Tans, NOAA/ESRL](https://esrl.noaa.gov/gmd/ccgg/trends/); [OCO-2 Carbon Dioxide in GIBS/Worldview](https://github.com/hcronk/oco2_worldview/blob/jpl/code/ref_co2_trend_gl.txt)
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md
index 2dd9a9411..f0006987c 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Carbon_Dioxide_Total_Column_Average.md
@@ -1,3 +1,3 @@
The OCO-2 Carbon Dioxide (Total Column Average) layer displays the column-averaged dry-air mole fraction of carbon dioxide (XCO<sub>2</sub>) in the vertical column of the atmosphere (i.e. from Earth’s surface to the top of the atmosphere) and is measured in parts per million (ppm).
-References: OCO2_L2_Lite_FP [doi:10.5067/E4E140XDMPO2](https://doi.org/10.5067/E4E140XDMPO2); Crisp et al. The ACOS CO2 Retrieval Algorithm - Part 2: Global XCO2 data Characterization Atmos. Meas. Tech., 5, 687-707, 2012; [GES DISC - OCO-2 Documents](https://disc.gsfc.nasa.gov/information/documents?title=OCO-2%20Documents); [OCO-2 Data Collections](https://disc.gsfc.nasa.gov/datasets?project=OCO)
+References: OCO2_L2_Lite_FP [doi:10.5067/5Q8JLZL1VD4A](https://doi.org/10.5067/5Q8JLZL1VD4A); Crisp et al. The ACOS CO2 Retrieval Algorithm - Part 2: Global XCO2 data Characterization Atmos. Meas. Tech., 5, 687-707, 2012; [GES DISC - OCO-2 Documents](https://disc.gsfc.nasa.gov/information/documents?title=OCO-2%20Documents); [OCO-2 Data Collections](https://disc.gsfc.nasa.gov/datasets?project=OCO)
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_757nm.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_757nm.md
index 4a0261946..c2e79daca 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_757nm.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_757nm.md
@@ -2,6 +2,6 @@ The OCO-2 Solar Induced Chlorophyll Fluorescence 757 nm layer displays the fluor
One of the OCO-2 channels, the O<sub>2</sub> A-band, contains multiple Fraunhofer lines and thus allows for the retrieval of SIF. The absorption at 771 nm is about 1.5 times smaller than at 757 nm, but both values are made available for analysis. However, the blended SIF is the recommended product. The OCO-2 Solar Induced Chlorophyll Fluorescence 771 nm parameter is taken from the OCO-2 Level 2 Lite SIF product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.
-References: OCO2_L2_Lite_SIF [doi:10.5067/XO2LBBNPO010](https://doi.org/10.5067/XO2LBBNPO010)
+References: OCO2_L2_Lite_SIF [doi:10.5067/OTRE7KQS8AU8](https://doi.org/10.5067/OTRE7KQS8AU8)
Frankenberg et al. Prospects for chlorophyll fluorescence remote sensing from the Orbiting Carbon Observatory-2, Remote Sensing of Environment, Vol 147, 5 May. 2014, Pgs 1-12, [doi:10.1016/j.rse.2014.02.007](https://doi.org/10.1016/j.rse.2014.02.007)
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_771nm.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_771nm.md
index a8fd072bc..bd57589de 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_771nm.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_771nm.md
@@ -2,6 +2,6 @@ The OCO-2 Solar Induced Chlorophyll Fluorescence 771 nm layer displays the fluor
One of the OCO-2 channels, the O<sub>2</sub> A-band, contains multiple Fraunhofer lines and thus allows for the retrieval of SIF. The absorption at 771 nm is about 1.5 times smaller than at 757 nm, but both values are made available for analysis. However, the blended SIF is the recommended product. The OCO-2 Solar Induced Chlorophyll Fluorescence 771 nm parameter is taken from the OCO-2 Level 2 Lite SIF product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.
-References: OCO2_L2_Lite_SIF [doi:10.5067/XO2LBBNPO010](https://doi.org/10.5067/XO2LBBNPO010)
+References: OCO2_L2_Lite_SIF [doi:10.5067/OTRE7KQS8AU8](https://doi.org/10.5067/OTRE7KQS8AU8)
Frankenberg et al. Prospects for chlorophyll fluorescence remote sensing from the Orbiting Carbon Observatory-2, Remote Sensing of Environment, Vol 147, 5 May. 2014, Pgs 1-12, [doi:10.1016/j.rse.2014.02.007](https://doi.org/10.1016/j.rse.2014.02.007)
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_Blended.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_Blended.md
index c9ee8791b..2da1834c5 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_Blended.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Solar_Induced_Florescence_Blended.md
@@ -2,6 +2,6 @@ The OCO-2 Solar Induced Chlorophyll Fluorescence (Blended) layer displays the fl
One of the OCO-2 channels, the O<sub>2</sub> A-band, contains multiple Fraunhofer lines and thus allows for the retrieval of SIF. The absorption at 771 nm is about 1.5 times smaller than at 757 nm, but both values are made available for analysis. However, the blended SIF is the recommended product. The OCO-2 Solar Induced Chlorophyll Fluorescence 771 nm parameter is taken from the OCO-2 Level 2 Lite SIF product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.
-References: OCO2_L2_Lite_SIF [doi:10.5067/XO2LBBNPO010](https://doi.org/10.5067/XO2LBBNPO010)
+References: OCO2_L2_Lite_SIF [doi:10.5067/OTRE7KQS8AU8](https://doi.org/10.5067/OTRE7KQS8AU8)
Frankenberg et al. Prospects for chlorophyll fluorescence remote sensing from the Orbiting Carbon Observatory-2, Remote Sensing of Environment, Vol 147, 5 May. 2014, Pgs 1-12, [doi:10.1016/j.rse.2014.02.007](https://doi.org/10.1016/j.rse.2014.02.007)
diff --git a/config/default/common/config/metadata/layers/oco2/OCO-2_Water_Vapor_Total_Column_Average.md b/config/default/common/config/metadata/layers/oco2/OCO-2_Water_Vapor_Total_Column_Average.md
index d8a5baab7..91f96cd3f 100644
--- a/config/default/common/config/metadata/layers/oco2/OCO-2_Water_Vapor_Total_Column_Average.md
+++ b/config/default/common/config/metadata/layers/oco2/OCO-2_Water_Vapor_Total_Column_Average.md
@@ -2,6 +2,6 @@ The OCO-2 Water Vapor (Total Column Average) layer displays the total gaseous wa
The OCO-2 Total Column Water Vapor is an ancillary product of the retrieval algorithm used to measure the CO<sub>2</sub> concentrations derived from the OCO-2 Level 2 Lite product. OCO-2 makes eight simultaneous, adjacent measurements, each with a spatial resolution of 2.25 km x 1.29 km. These measurements are then mapped onto a 500 m<sup>2</sup> grid. The repeat cycle for OCO-2 is every 16 days.
-References: OCO2_L2_Lite_FP [doi:10.5067/E4E140XDMPO2](https://doi.org/10.5067/E4E140XDMPO2)
+References: OCO2_L2_Lite_FP [doi:10.5067/5Q8JLZL1VD4A](https://doi.org/10.5067/5Q8JLZL1VD4A)
Nelson, R. R., et al.: High accuracy measurements of total column water vapor from the Orbiting Carbon Observatory-2, Geophysical Research Letters, 43, [doi:10.1002/2016GL071200](https://doi.org/10.1002/2016GL071200),