Interactive interface for browsing global, full-resolution satellite imagery
WV-3137: Add TEMPO layers (#5232)
minniewongb4bfee9a894d
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.mdnew file mode 100644index 000000000..57231f285--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Fraction layer provides information on the effective cloud fraction at 466 nm derived from the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is a unitless quantity.++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.++O<sub>2</sub>-O<sub>2</sub> cloud Level 2 files provide cloud information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.mdnew file mode 100644index 000000000..221837204--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.md@@ -0,0 +1,8 @@++The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.++O<sub>2</sub>-O<sub>2</sub> cloud Level 2 files provide cloud information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_CLDO4_L2 [doi:10.5067/IS-40e/TEMPO/CLDO4_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L2.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.mdnew file mode 100644index 000000000..1635ca6db--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.++Formaldehyde Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_HCHO_L2 [doi:10.5067/IS-40e/TEMPO/HCHO_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.mdnew file mode 100644index 000000000..8a9bb3ea1--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.++Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.mdnew file mode 100644index 000000000..72e68bc2f--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.++Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.mdnew file mode 100644index 000000000..dcfa5f8f6--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Cloud Fraction layer provides information on the effective cloud fraction (a unitless quantity) derived using the mixed Lambert Equivalent Reflectivity (LER) model from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L2 [doi:10.5067/IS-40e/TEMPO/O3TOT_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.mdnew file mode 100644index 000000000..362a93459--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L2 [doi:10.5067/IS-40e/TEMPO/O3TOT_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.mdnew file mode 100644index 000000000..20f66e127--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) ultraviolet (UV) Aerosol Index layer provides information on the UV aerosol index (a unitless quantity) using the difference between measured and theoretical radiance contrasts at two wavelengths (331.2 and 360 nm) from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 2 files provide ozone and supporting information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L2 [doi:10.5067/IS-40e/TEMPO/O3TOT_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L2.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.mdnew file mode 100644index 000000000..38539b7b1--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Fraction layer provides information on the effective cloud fraction at 466 nm derived from the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is a unitless quantity.++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.++O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.mdnew file mode 100644index 000000000..266dae87f--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.++O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.mdnew file mode 100644index 000000000..7665e4780--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.++Formaldehyde Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_HCHO_L3 [doi:10.5067/IS-40e/TEMPO/HCHO_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.mdnew file mode 100644index 000000000..16179973e--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.++Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.mdnew file mode 100644index 000000000..08b0c1495--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle and effective cloud fraction variables.++Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.mdnew file mode 100644index 000000000..051ffc073--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md@@ -0,0 +1,8 @@++The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (l3) Cloud Fraction layer provides information on the effective cloud fraction (a unitless quantity) derived using the mixed Lambert Equivalent Reflectivity (LER) model from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.mdnew file mode 100644index 000000000..e5231b4d0--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Ozone Column Amount layer provides information on the total amount of ozone in a vertical column of the atmosphere and is measured in Dobson Units (DU). The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.mdnew file mode 100644index 000000000..c1fd3f81a--- /dev/null+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md@@ -0,0 +1,7 @@+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (l3) ultraviolet (UV) Aerosol Index layer provides information on the UV aerosol index (a unitless quantity) using the difference between measured and theoretical radiance contrasts at two wavelengths (331.2 and 360 nm) from the total ozone retrieval algorithm. The retrieval is based on the Ozone Monitoring Instrument Total Ozone Mapping Spectrometer (OMI TOMS) V8.5 algorithm adapted for TEMPO.++Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the solar zenith angle variable.++Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.++References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)\ No newline at end of filediff --git a/config/default/common/config/wv.json/categories/featured/All.json b/config/default/common/config/wv.json/categories/featured/All.jsonindex 82cf25e0f..40163a65b 100644--- a/config/default/common/config/wv.json/categories/featured/All.json+++ b/config/default/common/config/wv.json/categories/featured/All.json@@ -7,6 +7,7 @@"id": "featured-all","description": "","measurements": [+ "TEMPO - Featured","Land Surface Reflectance - Featured","Surface Water Extent - Featured","Aboveground Biomass",diff --git a/config/default/common/config/wv.json/categories/hazards_and_disasters/All.json b/config/default/common/config/wv.json/categories/hazards_and_disasters/All.jsonindex df4da6697..db19e8d56 100644--- a/config/default/common/config/wv.json/categories/hazards_and_disasters/All.json+++ b/config/default/common/config/wv.json/categories/hazards_and_disasters/All.json@@ -47,6 +47,7 @@"Fires and Thermal Anomalies","Flood","Flood Hazard",+ "Formaldehyde","Forests, Mangrove","FPAR","Freeze/Thaw",diff --git a/config/default/common/config/wv.json/categories/science_disciplines/All.json b/config/default/common/config/wv.json/categories/science_disciplines/All.jsonindex baa180742..d024450f3 100644--- a/config/default/common/config/wv.json/categories/science_disciplines/All.json+++ b/config/default/common/config/wv.json/categories/science_disciplines/All.json@@ -48,6 +48,7 @@"Flood","Flood Hazard","Forests, Mangrove",+ "Formaldehyde","FPAR","Freeze/Thaw","Frozen Area",diff --git a/config/default/common/config/wv.json/categories/science_disciplines/Atmosphere.json b/config/default/common/config/wv.json/categories/science_disciplines/Atmosphere.jsonindex a6d6abd14..af1dc6d5a 100644--- a/config/default/common/config/wv.json/categories/science_disciplines/Atmosphere.json+++ b/config/default/common/config/wv.json/categories/science_disciplines/Atmosphere.json@@ -30,6 +30,7 @@"Dust","Evaporation","Geostationary",+ "Formaldehyde","Land Surface Temperature","Lightning","Methane",diff --git a/config/default/common/config/wv.json/layerOrder.json b/config/default/common/config/wv.json/layerOrder.jsonindex 3fafeb52a..1ff4e937e 100644--- a/config/default/common/config/wv.json/layerOrder.json+++ b/config/default/common/config/wv.json/layerOrder.json@@ -66,6 +66,19 @@"BlueMarble_NextGeneration","BlueMarble_ShadedRelief","BlueMarble_ShadedRelief_Bathymetry",+ "TEMPO_L2_Formaldehyde_Vertical_Column_Granule",+ "TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule",+ "TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule",+ "TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule",+ "TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule",+ "TEMPO_L2_Ozone_Column_Amount_Granule",+ "TEMPO_L3_Formaldehyde_Vertical_Column",+ "TEMPO_L3_NO2_Vertical_Column_Stratosphere",+ "TEMPO_L3_NO2_Vertical_Column_Troposphere",+ "TEMPO_L3_Cloud_Cloud_Fraction_Total",+ "TEMPO_L3_Cloud_Cloud_Pressure_Total",+ "TEMPO_L3_Ozone_Column_Amount",+ "TEMPO_L3_Ozone_Cloud_Fraction","VIIRS_NOAA20_DayNightBand_At_Sensor_Radiance","VIIRS_NOAA20_DayNightBand_AtSensor_M15","VIIRS_SNPP_DayNightBand_At_Sensor_Radiance",diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.jsonnew file mode 100644index 000000000..628556ff1--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.json@@ -0,0 +1,19 @@+{+ "layers": {+ "TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule": {+ "id": "TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule",+ "title": "Clouds (L2, Cloud Fraction Total, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Cloud Fraction",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true+ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.jsonnew file mode 100644index 000000000..8abc8fed4--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule": {+ "id": "TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule",+ "title": "Clouds (L2, Cloud Pressure Total, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Cloud Pressure",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.jsonnew file mode 100644index 000000000..351a69d85--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_Formaldehyde_Vertical_Column_Granule": {+ "id": "TEMPO_L2_Formaldehyde_Vertical_Column_Granule",+ "title": "Formaldehyde (L2, Vertical Column, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Formaldehyde",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.jsonnew file mode 100644index 000000000..8df3d42c2--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule": {+ "id": "TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule",+ "title": "Nitrogen Dioxide (L2, Vertical Column Stratosphere, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Nitrogen Dioxide",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.jsonnew file mode 100644index 000000000..7fbaf4edc--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule": {+ "id": "TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule",+ "title": "Nitrogen Dioxide (L2, Vertical Column Troposphere, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Nitrogen Dioxide",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.jsonindex 619854106..4df6cb24d 100644--- a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.json+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule.json@@ -2,14 +2,19 @@"layers": {"TEMPO_L2_Ozone_Cloud_Fraction_Granule": {"id": "TEMPO_L2_Ozone_Cloud_Fraction_Granule",- "title": "Ozone (Daily, Cloud Fraction)",- "subtitle": "TEMPO_L2G_O3_CF_LNK, Best Available, TEMPO",+ "title": "Ozone (L2, Cloud Fraction, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Ozone_Cloud_Fraction_Granule","tags": "","group": "overlays",- "layergroup": "Granules",+ "layergroup": "Ozone","type": "granule",+ "period": "subdaily",+ "count": 1,"cmrAvailability": true,- "period": "subdaily"+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true+}}}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.jsonnew file mode 100644index 000000000..42b847d43--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_Column_Amount_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_Ozone_Column_Amount_Granule": {+ "id": "TEMPO_L2_Ozone_Column_Amount_Granule",+ "title": "Ozone (L2, Column Amount O3, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Ozone_Column_Amount_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Ozone",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.jsonnew file mode 100644index 000000000..968fad9fc--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule.json@@ -0,0 +1,20 @@+{+ "layers": {+ "TEMPO_L2_Ozone_UV_Aerosol_Index_Granule": {+ "id": "TEMPO_L2_Ozone_UV_Aerosol_Index_Granule",+ "title": "Ozone (L2, UV Aerosol Index, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L2_Ozone_UV_Aerosol_Index_Granule",+ "tags": "",+ "group": "overlays",+ "layergroup": "Aerosol Index",+ "type": "granule",+ "period": "subdaily",+ "count": 1,+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:41:03Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.jsonnew file mode 100644index 000000000..2c7624f56--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.json@@ -0,0 +1,16 @@+{+ "layers": {+ "TEMPO_L3_Cloud_Cloud_Fraction_Total": {+ "id": "TEMPO_L3_Cloud_Cloud_Fraction_Total",+ "title": "Clouds (L3, Cloud Fraction Total, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total",+ "tags": "",+ "group": "overlays",+ "layergroup": "Cloud Fraction",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true+ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.jsonnew file mode 100644index 000000000..1a0d07363--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_Cloud_Cloud_Pressure_Total": {+ "id": "TEMPO_L3_Cloud_Cloud_Pressure_Total",+ "title": "Clouds (L3, Cloud Pressure Total, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total",+ "tags": "",+ "group": "overlays",+ "layergroup": "Cloud Pressure",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.jsonnew file mode 100644index 000000000..6275dc659--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_Formaldehyde_Vertical_Column": {+ "id": "TEMPO_L3_Formaldehyde_Vertical_Column",+ "title": "Formaldehyde (L3, Vertical Column, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Formaldehyde_Vertical_Column",+ "tags": "",+ "group": "overlays",+ "layergroup": "Formaldehyde",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.jsonnew file mode 100644index 000000000..e8ce81727--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_NO2_Vertical_Column_Stratosphere": {+ "id": "TEMPO_L3_NO2_Vertical_Column_Stratosphere",+ "title": "Nitrogen Dioxide (L3, Vertical Column Stratosphere, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere",+ "tags": "",+ "group": "overlays",+ "layergroup": "Nitrogen Dioxide",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}diff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.jsonnew file mode 100644index 000000000..7226d45c0--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_NO2_Vertical_Column_Troposphere": {+ "id": "TEMPO_L3_NO2_Vertical_Column_Troposphere",+ "title": "Nitrogen Dioxide (L3, Vertical Column Troposphere, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere",+ "tags": "",+ "group": "overlays",+ "layergroup": "Nitrogen Dioxide",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.jsonnew file mode 100644index 000000000..6c76585de--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_Ozone_Cloud_Fraction": {+ "id": "TEMPO_L3_Ozone_Cloud_Fraction",+ "title": "Ozone (L3, Cloud Fraction, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Ozone_Cloud_Fraction",+ "tags": "",+ "group": "overlays",+ "layergroup": "Ozone",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Column_Amount.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Column_Amount.jsonnew file mode 100644index 000000000..0e7d9eb8d--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_Column_Amount.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_Ozone_Column_Amount": {+ "id": "TEMPO_L3_Ozone_Column_Amount",+ "title": "Ozone (L3, Column Amount O3, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Ozone_Column_Amount",+ "tags": "",+ "group": "overlays",+ "layergroup": "Ozone",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.json b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.jsonnew file mode 100644index 000000000..066ca16c5--- /dev/null+++ b/config/default/common/config/wv.json/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.json@@ -0,0 +1,17 @@+{+ "layers": {+ "TEMPO_L3_Ozone_UV_Aerosol_Index": {+ "id": "TEMPO_L3_Ozone_UV_Aerosol_Index",+ "title": "Ozone (L3, UV Aerosol Index, Subdaily) (BETA)",+ "subtitle": "TEMPO",+ "description": "tempo/TEMPO_L3_Ozone_UV_Aerosol_Index",+ "tags": "",+ "group": "overlays",+ "layergroup": "Aerosol Index",+ "cmrAvailability": true,+ "startDate": "2024-05-13T10:30:00Z",+ "disableSnapshot": true++ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/measurements/Cloud Fraction.json b/config/default/common/config/wv.json/measurements/Cloud Fraction.jsonindex c3e09e12f..7dd75be6b 100644--- a/config/default/common/config/wv.json/measurements/Cloud Fraction.json+++ b/config/default/common/config/wv.json/measurements/Cloud Fraction.json@@ -3,7 +3,7 @@"Cloud Fraction": {"id": "cloud-fraction","title": "Cloud Fraction",- "subtitle": "Aqua/AIRS, Aqua/MODIS, Terra/MODIS",+ "subtitle": "Aqua/AIRS, Aqua/MODIS, Terra/MODIS, TEMPO","sources": {"Aqua/AIRS": {"id": "aqua-airs",@@ -39,9 +39,17 @@"MODIS_Terra_Cloud_Fraction_Night","OrbitTracks_Terra_Descending","OrbitTracks_Terra_Ascending"-]-+ },+ "TEMPO": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule",+ "TEMPO_L3_Cloud_Cloud_Fraction_Total"+ ]}}}diff --git a/config/default/common/config/wv.json/measurements/Cloud Pressure.json b/config/default/common/config/wv.json/measurements/Cloud Pressure.jsonindex 3bda1bb24..187f5f132 100644--- a/config/default/common/config/wv.json/measurements/Cloud Pressure.json+++ b/config/default/common/config/wv.json/measurements/Cloud Pressure.json@@ -3,7 +3,7 @@"Cloud Pressure": {"id": "cloud-pressure","title": "Cloud Pressure",- "subtitle": "Aqua/MODIS, Terra/MODIS, Aura/OMI",+ "subtitle": "Aqua/MODIS, Terra/MODIS, Aura/OMI, TEMPO","sources": {"Aqua/MODIS": {"id": "aqua-modis",@@ -38,6 +38,16 @@"OMI_Cloud_Pressure","OrbitTracks_Aura_Ascending"]+ },+ "TEMPO": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule",+ "TEMPO_L3_Cloud_Cloud_Pressure_Total"+ ]}}}diff --git a/config/default/common/config/wv.json/measurements/Featured - TEMPO.json b/config/default/common/config/wv.json/measurements/Featured - TEMPO.jsonnew file mode 100644index 000000000..452b9413b--- /dev/null+++ b/config/default/common/config/wv.json/measurements/Featured - TEMPO.json@@ -0,0 +1,32 @@+{+ "measurements": {+ "TEMPO - Featured": {+ "id": "featured-tempo",+ "title": "Tropospheric Emissions: Monitoring of Pollution",+ "subtitle": "TEMPO",+ "sources": {+ "TEMPO": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_Formaldehyde_Vertical_Column_Granule",+ "TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule",+ "TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule",+ "TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule",+ "TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule",+ "TEMPO_L2_Ozone_Column_Amount_Granule",+ "TEMPO_L3_Formaldehyde_Vertical_Column",+ "TEMPO_L3_NO2_Vertical_Column_Stratosphere",+ "TEMPO_L3_NO2_Vertical_Column_Troposphere",+ "TEMPO_L3_Cloud_Cloud_Fraction_Total",+ "TEMPO_L3_Cloud_Cloud_Pressure_Total",+ "TEMPO_L3_Ozone_Column_Amount",+ "TEMPO_L3_Ozone_Cloud_Fraction"+ ]+ }+ }+ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/measurements/Formaldehyde.json b/config/default/common/config/wv.json/measurements/Formaldehyde.jsonnew file mode 100644index 000000000..45f485328--- /dev/null+++ b/config/default/common/config/wv.json/measurements/Formaldehyde.json@@ -0,0 +1,21 @@+{+ "measurements": {+ "Formaldehyde": {+ "id": "formaldehyde",+ "title": "Formaldehyde",+ "subtitle": "TEMPO",+ "sources": {+ "ISS/GEDI": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_Formaldehyde_Vertical_Column_Granule",+ "TEMPO_L3_Formaldehyde_Vertical_Column"+ ]+ }+ }+ }+ }+}\ No newline at end of filediff --git a/config/default/common/config/wv.json/measurements/Nitrogen Dioxide.json b/config/default/common/config/wv.json/measurements/Nitrogen Dioxide.jsonindex 39fbfb2d4..c1640f900 100644--- a/config/default/common/config/wv.json/measurements/Nitrogen Dioxide.json+++ b/config/default/common/config/wv.json/measurements/Nitrogen Dioxide.json@@ -3,7 +3,7 @@"Nitrogen Dioxide": {"id": "nitrogen-dioxide","title": "Nitrogen Dioxide",- "subtitle": "Aura/OMI, SEDAC",+ "subtitle": "Aura/OMI, TEMPO, SEDAC","sources": {"Aura/MLS": {"id": "aura-omi",@@ -15,6 +15,18 @@"OrbitTracks_Aura_Ascending"]},+ "TEMPO": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule",+ "TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule",+ "TEMPO_L3_NO2_Vertical_Column_Stratosphere",+ "TEMPO_L3_NO2_Vertical_Column_Troposphere"+ ]+ },"SEDAC": {"id": "sedac","title": "SEDAC",diff --git a/config/default/common/config/wv.json/measurements/Ozone.json b/config/default/common/config/wv.json/measurements/Ozone.jsonindex 0d6927bbe..2f57f1928 100644--- a/config/default/common/config/wv.json/measurements/Ozone.json+++ b/config/default/common/config/wv.json/measurements/Ozone.json@@ -3,7 +3,7 @@"Ozone": {"id": "ozone","title": "Ozone",- "subtitle": "Aura/MLS, Aura/OMI, Suomi NPP/OMPS, MERRA-2",+ "subtitle": "Aura/MLS, Aura/OMI, Suomi NPP/OMPS, TEMPO, MERRA-2","sources": {"Aura/MLS": {"id": "aura-mls",@@ -38,6 +38,18 @@"OrbitTracks_Suomi_NPP_Ascending"]},+ "TEMPO": {+ "id": "tempo",+ "title": "TEMPO",+ "description": "",+ "image": "",+ "settings": [+ "TEMPO_L2_Ozone_Column_Amount_Granule",+ "TEMPO_L2_Ozone_Cloud_Fraction_Granule",+ "TEMPO_L3_Ozone_Column_Amount",+ "TEMPO_L3_Ozone_Cloud_Fraction"+ ]+ },"MERRA-2": {"id": "merra2","title": "MERRA-2",diff --git a/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.jpgnew file mode 100644index 000000000..ab74f1571Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Fraction_Total_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.jpgnew file mode 100644index 000000000..48650a92aBinary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Cloud_Cloud_Pressure_Total_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.jpgnew file mode 100644index 000000000..cb59d7b80Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.jpgnew file mode 100644index 000000000..6e9d3b5c7Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.jpgnew file mode 100644index 000000000..a105c326dBinary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Cloud_Fraction_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Cloud_Fraction_Granule.jpgdeleted file mode 100644index 7d9c05ee4..000000000--- a/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Cloud_Fraction_Granule.jpg+++ /dev/null@@ -1,6 +0,0 @@-<?xml version='1.0' encoding="UTF-8" standalone="no" ?>-<ServiceExceptionReport version="1.3.0" xmlns="http://www.opengis.net/ogc" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.opengis.net/ogc http://schemas.opengis.net/wms/1.3.0/exceptions_1_3_0.xsd">-<ServiceException code="LayerNotDefined">-msWMSLoadGetMapParams(): WMS server error. Invalid layer(s) given in the LAYERS parameter. A layer might be disabled for this request. Check wms/ows_enable_request settings.-</ServiceException>-</ServiceExceptionReport>diff --git a/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Column_Amount_Granule.jpg b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Column_Amount_Granule.jpgnew file mode 100644index 000000000..014bcedbdBinary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L2_Ozone_Column_Amount_Granule.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Fraction_Total.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Fraction_Total.jpgnew file mode 100644index 000000000..2a23390b4Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Fraction_Total.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Pressure_Total.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Pressure_Total.jpgnew file mode 100644index 000000000..1f4c9d701Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Cloud_Cloud_Pressure_Total.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_Formaldehyde_Vertical_Column.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Formaldehyde_Vertical_Column.jpgnew file mode 100644index 000000000..47e6b9d24Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Formaldehyde_Vertical_Column.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Stratosphere.jpg b/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Stratosphere.jpgnew file mode 100644index 000000000..957377ba2Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Stratosphere.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Troposphere.jpg b/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Troposphere.jpgnew file mode 100644index 000000000..b646bcfadBinary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_NO2_Vertical_Column_Troposphere.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Cloud_Fraction.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Cloud_Fraction.jpgnew file mode 100644index 000000000..db12b808eBinary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Cloud_Fraction.jpg differdiff --git a/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Column_Amount.jpg b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Column_Amount.jpgnew file mode 100644index 000000000..d41ec0516Binary files /dev/null and b/web/images/layers/previews/geographic/TEMPO_L3_Ozone_Column_Amount.jpg differ