Interactive interface for browsing global, full-resolution satellite imagery
remove unused measurement descriptions
Jason Kentd07e7bf5a806
diff --git a/config/default/common/config/metadata/layers/amsre/SnowDepthOverIce.md b/config/default/common/config/metadata/layers/amsre/SnowDepthOverIce.mddeleted file mode 100644index 94598560d..000000000--- a/config/default/common/config/metadata/layers/amsre/SnowDepthOverIce.md+++ /dev/null@@ -1,10 +0,0 @@-### AMSR-E Snow Depth Over Ice, 12 km-Temporal coverage: 18 June 2002 - 4 October 2011--The Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) "Snow Depth Over Ice, 12 km" layer displays snow depth in centimeters over sea ice in the Polar regions from the daily half-orbit passes of the AMSR-E B feedhorn at a 12.5 km resolution. Snow depth over sea ice is a running 5-day average based on the current day and the 4 previous days.--Onboard NASA's Aqua satellite, the AMSR-E radiometer measured terrestrial, oceanic, and atmospheric parameters used to investigate global water and energy cycles. The imagery resolution is 2 km and sensor resolution is 12.5 km. The temporal resolution was daily.--References: [AMSR-E/Aqua Daily L3 12.5 km Brightness Temperature, Sea Ice Concentration, & Snow Depth Polar Grids](https://nsidc.org/data/ae_si12)--Data fields: `SI_12km_NH_SNOWDEPTH_5DAY`; `SI_12km_SH_SNOWDEPTH_5DAY`diff --git a/config/default/common/config/metadata/layers/modis/terra/SeaSurfaceTemperature.md b/config/default/common/config/metadata/layers/modis/terra/SeaSurfaceTemperature.mddeleted file mode 100644index 822b5a607..000000000--- a/config/default/common/config/metadata/layers/modis/terra/SeaSurfaceTemperature.md+++ /dev/null@@ -1,44 +0,0 @@-### Sea Surface Temperature (Day, L2)-Temporal coverage: 1 April - 3 April 2020; 6 June 2020 - present--### Sea Surface Temperature (Night, L2)-Temporal coverage: 1 April - 3 April 2020; 6 June 2020 - present--### Sea Surface Temperature (L3, Night, Daily | 8-Day | Monthly | Annual, Mid-IR, 4km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 4km layer shows global nighttime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Mid-Infrared (Short–Wave) SST Algorithm that uses MODIS bands 22 and 23 at 3.959 and 4.050 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 4.63 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations: [MODIS Terra Level 3 SST Mid-IR Daily 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_DAILY_4KM_NIGHTTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Mid-IR 8-Day 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_8DAY_4KM_NIGHTTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Mid-IR Monthly 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_MONTHLY_4KM_NIGHTTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Mid-IR Annual 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_ANNUAL_4KM_NIGHTTIME_V2014.0) (annually)--### Sea Surface Temperature (L3, Night, Daily | 8-Day | Monthly | Annual, Mid-IR, 9km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 9km layer shows global nighttime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Mid-Infrared (Short–Wave) SST Algorithm that uses MODIS bands 22 and 23 at 3.959 and 4.050 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 9 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations:-[MODIS Terra Level 3 SST Mid-IR Daily 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_DAILY_9KM_NIGHTTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Mid-IR 8-Day 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_8DAY_9KM_NIGHTTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Mid-IR Monthly 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_MONTHLY_9KM_NIGHTTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Mid-IR Annual 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_MID-IR_ANNUAL_9KM_NIGHTTIME_V2014.0) (annually)--### Sea Surface Temperature (L3, Day, Daily | 8-Day | Monthly | Annual, Thermal, 4km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 4km layer shows global daytime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Thermal (Long–Wave) SST Algorithm that uses MODIS bands 31 and 32 at 11 and 12 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 4.63 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations:-[MODIS Terra Level 3 SST Thermal Daily 4km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_DAILY_4KM_DAYTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Thermal 8-Day 4km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_8DAY_4KM_DAYTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Thermal Monthly 4km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_MONTHLY_4KM_DAYTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Thermal Annual 4km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_ANNUAL_4KM_DAYTIME_V2014.0) (annually)--### Sea Surface Temperature (L3, Night, Daily | 8-Day | Monthly | Annual, Thermal, 4km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 4km layer shows global nighttime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Thermal (Long–Wave) SST Algorithm that uses MODIS bands 31 and 32 at 11 and 12 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 4.63 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations:-[MODIS Terra Level 3 SST Thermal Daily 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_DAILY_4KM_NIGHTTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Thermal 8-Day 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_8DAY_4KM_NIGHTTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Thermal Monthly 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_MONTHLY_4KM_NIGHTTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Thermal Annual 4km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_ANNUAL_4KM_NIGHTTIME_V2014.0) (annually)--### Sea Surface Temperature (L3, Day, Daily | 8-Day | Monthly | Annual, Thermal, 9km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 9km layer shows global daytime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Thermal-Infrared (Long–Wave) SST Algorithm that uses MODIS bands 31 and 32 at 11 and 12 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 9 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations:-[MODIS Terra Level 3 SST Thermal Daily 9km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_DAILY_9KM_DAYTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Thermal 8-Day 9km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_8DAY_9KM_DAYTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Thermal Monthly 9km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_MONTHLY_9KM_DAYTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Thermal Annual 9km Daytime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_ANNUAL_9KM_DAYTIME_V2014.0) (annually)--### Sea Surface Temperature (L3, Night, Daily | 8-Day | Monthly | Annual, Thermal, 9km)-Temporal coverage: 26 February 2000 - present--The MODIS L3 SST 9km layer shows global nighttime sea surface temperature (SST) at a depth of a few micrometers with ranges from -1.8 to 32 degree Celsius. The SST is derived with a Thermal-Infrared (Long–Wave) SST Algorithm that uses MODIS bands 31 and 32 at 11 and 12 μm. This Level 3 product is derived from native 1 km Level 2 SST observations that are mapped to a global 9 km grid. The temporal resolution of MODIS L3 SST is daily, 8-Day, monthly, and annually. More information and access to the data sources is available at these locations:-[MODIS Terra Level 3 SST Thermal Daily 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_DAILY_9KM_NIGHTTIME_V2014.0) (daily); [MODIS Terra Level 3 SST Thermal 8-Day 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_8DAY_9KM_NIGHTTIME_V2014.0) (8-Day); [MODIS Terra Level 3 SST Thermal Monthly 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_MONTHLY_9KM_NIGHTTIME_V2014.0) (monthly); and [MODIS Terra Level 3 SST Thermal Annual 9km Nighttime v2014.0](https://podaac.jpl.nasa.gov/dataset/MODIS_TERRA_L3_SST_THERMAL_ANNUAL_9KM_NIGHTTIME_V2014.0) (annually)--References: Details of the [algorithm](https://oceancolor.gsfc.nasa.gov/atbd/sst4/) can be found at Ocean Biology Processing Group (OBPG/OB.DAAC) website.--P. J. Minnett et al., "Sea-surface temperature measurements from the Moderate-Resolution Imaging Spectroradiometer (MODIS) on Aqua and Terra," IGARSS 2004. 2004 IEEE International Geoscience and Remote Sensing Symposium, Anchorage, AK, 2004, pp. 4576-4579 vol.7. [doi: 10.1109/IGARSS.2004.1370173](https://doi.org/10.1109/IGARSS.2004.1370173).diff --git a/config/default/common/config/metadata/layers/multi-mission/WindSpeedOverIceFreeOceans.md b/config/default/common/config/metadata/layers/multi-mission/WindSpeedOverIceFreeOceans.mddeleted file mode 100644index edbb7462a..000000000--- a/config/default/common/config/metadata/layers/multi-mission/WindSpeedOverIceFreeOceans.md+++ /dev/null@@ -1,13 +0,0 @@-### Wind Speed over Ice-Free Oceans (Monthly, Average)-Temporal Coverage: January 1988 - August 2016--The RSS Wind Speed over Ice-Free Oceans layer indicates the average wind speed within a month in meters per second over ocean areas that are not covered in ice. The imagery resolution is about 1 degree, or about 111 kilometers, and the temporal resolution is monthly. This layer was constructed using data collected from all of the SSM/I, SSMIS F16, SSMIS F17, AMSR-E, AMSR-2, and WindSat instruments. This layer was constructed by first creating a monthly wind speed 1-degree map from each satellite. Then, quality control measures were applied to this map and combined with wind speed measurements from each instrument to output this layer.--The Special Sensor Microwave/Imager (SSM/I) is a seven channel passive microwave radiometer operating at four frequencies and dual-polarization. The Special Sensor Microwave Imager Sounder (SSMIS) is also a microwave radiometer that includes a sounder. The Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) is a twelve-channel, six-frequency, total power passive-microwave radiometer. The Advanced Microwave Scanning Radiometer 2 (AMSR2) is a remote sensing instrument measuring weak microwave emissions from the surface and the atmosphere of the Earth providing microwave emission and scattering intensity measurements. Finally, WindSat is a polarimetric microwave radiometer which measures ocean surface wind vectors.--References: [GHRC: RSS Monthly 1-Deg Merged Wind Climatology NetCDF V7R01](https://doi.org/10.5067/MEASURES/MULTIPLE/WIND_CLIMATOLOGY/DATA302);-[RSS: Merged Wind Speed 1-deg Monthly Climate Product](http://www.remss.com/measurements/wind/wspd-1-deg-product);-[RSS: AMSR2/AMSRE](http://www.remss.com/missions/amsr);-[RSS: SSMI/SSMIS](http://www.remss.com/missions/ssmi/);-[GCOM-W1: AMSR2](https://suzaku.eorc.jaxa.jp/GCOM_W/w_amsr2/whats_amsr2.html);-[WindSat Quick Guide by NASA / SPoRT](https://weather.msfc.nasa.gov/sport/survey/windSat/WindSat_Reference_Guide.pdf)diff --git a/config/default/common/config/metadata/layers/seawifs/SWDBAerosol.md b/config/default/common/config/metadata/layers/seawifs/SWDBAerosol.mddeleted file mode 100644index 5f9de4181..000000000--- a/config/default/common/config/metadata/layers/seawifs/SWDBAerosol.md+++ /dev/null@@ -1,11 +0,0 @@-### Aerosol Angstrom Exponent (Daily)-Temporal coverage: 4 September 1997 - 8 February 2000; 1 January 2010 - 30 January 2010; 1 December 2010--### Aerosol Angstrom Exponent (Monthly)-Temporal coverage: October 1997 - April 2004; January - December 2010--### Aerosol Optical Thickness 550nm (Daily)-Temporal coverage: 4 September 1997 - 25 November 1997; 1 January 2010 - 30 January 2010; 1 December 2010--### Aerosol Optical Thickness 550nm (Monthly)-Temporal coverage: October 1997 - May 1999; January - December 2010diff --git a/config/default/common/config/metadata/layers/smap/BrightnessTemperature.md b/config/default/common/config/metadata/layers/smap/BrightnessTemperature.mddeleted file mode 100644index 9c67ab685..000000000--- a/config/default/common/config/metadata/layers/smap/BrightnessTemperature.md+++ /dev/null@@ -1,67 +0,0 @@-### Uncorrected Brightness Temperature 36 km (L1, Passive, Fore | Aft, H Polarization | V Polarization)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 36 km" layers display brightness temperatures (TBs) posted to a 36 km EASE-Grid 2.0 and uncorrected for the presence of water in Kelvin (K) for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer. At the L-band frequency used by SMAP, the TB of the land surface is proportional to its emissivity multiplied by its physical temperature.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: SPL1CTB [doi: 10.5067/JJ5FL7FRLKJI](https://doi.org/10.5067/JJ5FL7FRLKJI)--Data fields: `cell_tb_h_fore`, `cell_tb_h_aft`, `cell_tb_v_fore`, `cell_tb_v_aft`--### Uncorrected Brightness Temperature 36 km QA and RFI Flags-Temporal coverage: 31 March 2015 - present--### Uncorrected Brightness Temperature 36 km QA (L1, Passive, Fore | Aft, H Polarization | V Polarization)-The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 36 km QA” layers display quality assurance (QA) flags for uncorrected brightness temperatures (TBs) on a 36 km EASE-Grid 2.0 for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer.--Within the image, green indicates that TB observations have acceptable quality for science use, yellow indicates that caution should be used with the TB observations as one or more quality-impacting conditions have been identified, and red indicates that TB observations are flagged as bad due to unacceptable quality.---### Uncorrected Brightness Temperature 36 km RFI (L1, Passive, Fore | Aft, H Polarization | V Polarization)-The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 36 km RFI” layers displays Radio Frequency Interference (RFI) quality flags of uncorrected brightness temperatures (TBs) on a 36 km EASE-Grid 2.0 for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer. RFI refers to the interference in measurements from other transmitters operating at frequencies adjacent to the SMAP L-band frequency.--Within the image, green indicates that TB observations are free of RFI and approved for science use, yellow indicates that caution should be used with the TB observations as RFI was detected but mitigated, and red indicates that TB observations are flagged as bad due to RFI.--References: SPL1CTB [doi: 10.5067/JJ5FL7FRLKJI](https://doi.org/10.5067/JJ5FL7FRLKJI)--Data fields: `cell_tb_qual_flag_h_fore`, `cell_tb_qual_flag_h_aft`, `cell_tb_qual_flag_v_fore`, `cell_tb_qual_flag_v_aft`--### Uncorrected Brightness Temperature 9 km (L1, Passive, Fore | Aft, H Polarization | V Polarization)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 9 km" layers display brightness temperatures (TBs) uncorrected for the presence of water in Kelvin (K) for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer. To enhance the grid resolution, Backus-Gilbert optimal interpolation techniques are used to extract maximum information from SMAP antenna temperatures and convert them to brightness temperatures, which are posted to the 9 km EASE-Grid 2.0 in a global cylindrical projection. At the L-band frequency used by SMAP, the TB of the land surface is proportional to its emissivity multiplied by its physical temperature.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: SPL1CTB_E [doi:10.5067/XB8K63YM4U8O](https://doi.org/10.5067/XB8K63YM4U8O)--Data fields: `cell_tb_h_fore`, `cell_tb_h_aft`, `cell_tb_v_fore`, `cell_tb_v_aft`--### Uncorrected Brightness Temperature 9 km QA and RFI Flags-Temporal coverage: 31 March 2015 - present--### Uncorrected Brightness Temperature 9 km QA (L1, Passive, Fore | Aft, H Polarization | V Polarization)-The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 9 km QA” layers display quality assurance (QA) flags for uncorrected brightness temperatures (TBs) posted to a 9 km EASE-Grid 2.0 for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer.--Within the image, green indicates that TB observations have acceptable quality for science use, yellow indicates that caution should be used with the TB observations as one or more quality-impacting conditions have been identified, and red indicates that TB observations are flagged as bad due to unacceptable quality.--### Uncorrected Brightness Temperature 9 km RFI (L1, Passive, Fore | Aft, H Polarization | V Polarization)-The Soil Moisture Active Passive (SMAP) "Uncorrected Brightness Temperature 9 km RFI” layers displays Radio Frequency Interference (RFI) quality flags of uncorrected brightness temperatures (TBs) posted to a 9 km EASE-Grid 2.0 for the horizontal (H) and vertical (V) polarizations of the fore and aft scans from the SMAP radiometer. RFI refers to the interference in measurements from other transmitters operating at frequencies adjacent to the SMAP L-band frequency.--Within the image, green indicates that TB observations are free of RFI and approved for science use, yellow indicates that caution should be used with the TB observations as RFI was detected but mitigated, and red indicates that TB observations are flagged as bad due to RFI.--References: SPL1CTB_E [doi:10.5067/XB8K63YM4U8O](https://doi.org/10.5067/XB8K63YM4U8O)--Data fields: `cell_tb_qual_flag_h_fore`, `cell_tb_qual_flag_h_aft`, `cell_tb_qual_flag_v_fore`, `cell_tb_qual_flag_v_aft`--### Corrected Brightness Temperature (L3, Passive, H Polarization | V Polarization)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) "Corrected Brightness Temperature" layers display brightness temperatures (TBs) in Kelvin (K) for the horizontal (H) and vertical (V) polarizations from the SMAP radiometer. The TBs are corrected for the presence of water wherever water fraction is below a threshold. At the L-band frequency used by SMAP, the TB of the land surface is proportional to its emissivity multiplied by its physical temperature.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP L3 Radiometer Global Daily 36 km EASE-Grid Soil Moisture](https://nsidc.org/data/SPL3SMP)--Data fields: `tb_h_corrected`, `tb_v_corrected`diff --git a/config/default/common/config/metadata/layers/smap/CorrectedBrightnessTemperature.md b/config/default/common/config/metadata/layers/smap/CorrectedBrightnessTemperature.mddeleted file mode 100644index c1b37f9d5..000000000--- a/config/default/common/config/metadata/layers/smap/CorrectedBrightnessTemperature.md+++ /dev/null@@ -1,12 +0,0 @@-### Corrected Brightness Temperature (L3, Passive, H Polarization | V Polarization)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) "Corrected Brightness Temperature" layers display brightness temperatures (TBs) in Kelvin (K) for the horizontal (H) and vertical (V) polarizations from the SMAP radiometer.--The TBs are corrected for the presence of water wherever water fraction is below a threshold. At the L-band frequency used by SMAP, the TB of the land surface is proportional to its emissivity multiplied by its physical temperature.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate. The imagery resolution is 2 km and sensor resolution is 36 km. The temporal resolution is daily.--References: [SMAP L3 Radiometer Global Daily 36 km EASE-Grid Soil Moisture](https://nsidc.org/data/SPL3SMP)--Data fields: `tb_h_corrected`, `tb_v_corrected`diff --git a/config/default/common/config/metadata/layers/smap/FreezeThaw.md b/config/default/common/config/metadata/layers/smap/FreezeThaw.mddeleted file mode 100644index 2145bb29b..000000000--- a/config/default/common/config/metadata/layers/smap/FreezeThaw.md+++ /dev/null@@ -1,32 +0,0 @@-### Freeze/Thaw 36 km (L3, Passive)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) “Freeze/Thaw 36 km (L3, Passive)” layer displays freeze/thaw state posted on a 36 km EASE-Grid 2.0 for Global land suface areas and land surface areas north of 45°N latitude from the SMAP radiometer. Freeze/thaw is detected by identifying the temporal response of the normalized polarization ratio (NPR) of the brightness temperature, which is sensitive to changes in the dielectric constant of the landscape components that occur as the water within the components transitions between frozen and non-frozen conditions.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP L3 Radiometer Global and Northern Hemisphere Daily 36 km EASE-Grid Freeze/Thaw State](https://nsidc.org/data/spl3ftp)--Data field: `freeze_thaw`--### Freeze/Thaw 9 km (L3, Passive)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) “Freeze/Thaw 9 km (L3, Passive)” layer displays freeze/thaw state for Global land surface areas and land surface areas north of 45°N latitude from the SMAP radiometer. To enhance the grid resolution, Backus-Gilbert optimal interpolation techniques are used to extract maximum information from SMAP antenna temperatures and convert them to brightness temperatures, which are posted to the 9 km EASE-Grid 2.0. Freeze/thaw is detected by identifying the temporal response of the normalized polarization ratio (NPR) of the brightness temperature, which is sensitive to changes in the dielectric constant of the landscape components that occur as the water within the components transitions between frozen and non-frozen conditions.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP Enhanced L3 Radiometer Global and Northern Hemisphere Daily 9 km EASE-Grid Freeze/Thaw State](https://nsidc.org/data/spl3ftp_e)--Data field: `freeze_thaw`--### Freeze/Thaw 3 km (L3, Active)-Temporal coverage: 13 April 2015 - 7 July 2015--The Soil Moisture Active Passive (SMAP) “Freeze/Thaw 3 km (L3, Active)” layer displays freeze/thaw state posted on a 3 km EASE-Grid 2.0 for land surface areas north of 45°N latitude from the SMAP radar. Freeze/thaw is detected by identifying the temporal response of radar backscatter to changes in the dielectric constant of the landscape components that occur as the water within the components transitions between frozen and non-frozen conditions.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP L3 Radar Northern Hemisphere Daily 3 km EASE-Grid Freeze/Thaw State](https://nsidc.org/data/spl3fta/)--Data field: `freeze_thaw`diff --git a/config/default/common/config/metadata/layers/smap/RootZoneSoilMoisture.md b/config/default/common/config/metadata/layers/smap/RootZoneSoilMoisture.mddeleted file mode 100644index c8154e7fc..000000000--- a/config/default/common/config/metadata/layers/smap/RootZoneSoilMoisture.md+++ /dev/null@@ -1,21 +0,0 @@-### Root Zone Soil Moisture 9 km (L4, 12z Instantaneous, Model Value-Added)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) “Root Zone Soil Moisture 9 km (L4, 12z Instantaneous, Model Value-Added)” layer displays model-derived global estimates of root zone soil moisture of the top 100 cm of the soil column in m<sup>3</sup>/m<sup>3</sup> posted on a 9 km EASE-Grid 2.0. Root zone soil moisture estimates are obtained by merging SMAP observations with estimates from a land surface model in a soil moisture ensemble Kalman data assimilation system. 12z (or 12:00:00 UTC) indicates the time of the analysis update.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP L4 9 km EASE-Grid Surface and Root Zone Soil Moisture Analysis Update](https://nsidc.org/data/spl4smau/)--Data field: `sm_rootzone_analysis`--### Root Zone Soil Moisture 9 km Uncertainty (L4, 12z Instantaneous, Model Value-Added)-Temporal coverage: 31 March 2015 - present--The Soil Moisture Active Passive (SMAP) “Root Zone Soil Moisture Uncertainty (L4,12z Instantaneous, Model Value-Added)” layer displays uncertainty estimates of model-derived global root zone soil moisture of the top 100 cm of the soil column in m<sup>3</sup>/m<sup>3</sup> posted on a 9 km EASE-Grid 2.0. Root zone estimates are obtained by merging SMAP observations with estimates from a land surface model in a soil moisture ensemble data assimilation system. Error estimates are derived from the ensemble standard deviation of the analyzed fields. 12z (or 12:00:00 UTC) indicates the time of the analysis update.--The SMAP spacecraft carries two instruments, a radar (active) and a radiometer (passive), that together make global measurements of land surface soil moisture and freeze/thaw state. It is useful for monitoring and predicting natural hazards such as floods and droughts, understanding the linkages between Earth’s water, energy and carbon cycles, and reducing uncertainties in predicting weather and climate.--References: [SMAP L4 9 km EASE-Grid Surface and Root Zone Soil Moisture Analysis Update](https://nsidc.org/data/spl4smau/)--Data field: `sm_rootzone_analysis_ensstd`