Interactive interface for browsing global, full-resolution satellite imagery
WV-3650 & WV-3768: Update NO2 and HCHO for NRT and STD version upgrade (#6173)
minniewongec0acd88ecd1
diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.mdindex 1635ca6db..27f175234 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_Formaldehyde_Vertical_Column_Granule.md@@ -1,7 +1,9 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.Formaldehyde Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_HCHO_L2 [doi:10.5067/IS-40e/TEMPO/HCHO_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L2.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications. NRT imagery may show East-West oriented stripes associated with using a radiance reference calculated with observations from previous days.++References: TEMPO_HCHO_L2_NRT [doi:10.5067/IS-40e/TEMPO/HCHO_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_NRT_L2.002); TEMPO_HCHO_L2 [doi:10.5067/IS-40e/TEMPO/HCHO_L2.004](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L2.004)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.mdindex 18d397904..027db5ace 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Stratosphere_Granule.md@@ -1,7 +1,10 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements) and solar zenith angle (removing data retrieved at high solar zenith angles). The filters applied are set to remove pixels based on the following: main data quality flag greater than 1 and solar zenith angle greater than 80 degrees.Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.++References: TEMPO_NO2_L2_NRT [doi:10.5067/IS-40e/TEMPO/NO2_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L2.002);+ TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.004](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.004)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.mdindex b695a9fd5..c59eb2dd0 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L2_NO2_Vertical_Column_Troposphere_Granule.md@@ -1,7 +1,10 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 2 (L2) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.+Imagery is available as approximately six-minute granules for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), and the imagery resolution is 1 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.Nitrogen dioxide Level 2 files provide trace gas information at TEMPO’s native spatial resolution for individual granules. Each granule covers the entire North-South TEMPO FOR but only a portion of the East-West FOR. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.++References: TEMPO_NO2_L2_NRT [doi:10.5067/IS-40e/TEMPO/NO2_NRT_L2.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L2.002);+ TEMPO_NO2_L2 [doi:10.5067/IS-40e/TEMPO/NO2_L2.004](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L2.004)\ No newline at end of filediff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.mdindex 38539b7b1..d8604582c 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Fraction_Total.md@@ -2,6 +2,6 @@ The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud FImagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.-O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)\ No newline at end of file+References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.mdindex 266dae87f..b6aa0790e 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Cloud_Cloud_Pressure_Total.md@@ -1,7 +1,7 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).+zThe Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud Pressure layer provides information on the optical centroid pressure of clouds derived using the O<sub>2</sub>-O<sub>2</sub> cloud retrieval algorithm and is measured in hectopascals (hPa).Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.-O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+O<sub>2</sub>-O<sub>2</sub> cloud Level 3 files provide cloud information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)\ No newline at end of file+References: TEMPO_CLDO4_L3 [doi:10.5067/IS-40e/TEMPO/CLDO4_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/CLDO4_L3.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.mdindex 7665e4780..0ae72a76b 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Formaldehyde_Vertical_Column.md@@ -1,7 +1,10 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Formaldehyde Vertical Column layer provides information on the total amount of formaldehyde in a vertical column of the atmosphere. This is provided as the total number of formaldehyde molecules in a column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, solar zenith angle, and effective cloud fraction variables.+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.-Formaldehyde Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Formaldehyde Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_HCHO_L3 [doi:10.5067/IS-40e/TEMPO/HCHO_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L3.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications. NRT imagery may show East-West oriented stripes associated with using a radiance reference calculated with observations from previous days.++References: TEMPO_HCHO_L3_NRT [doi:10.5067/IS-40e/TEMPO/HCHO_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_NRT_L3.002);+ TEMPO_HCHO_L3 [doi:10.5067/IS-40e/TEMPO/HCHO_L3.004](https://doi.org/10.5067/IS-40e/TEMPO/HCHO_L3.004)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.mdindex 5ce9a9a42..e22e714b0 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Stratosphere.md@@ -1,7 +1,10 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Stratosphere layer provides information on the amount of nitrogen dioxide in the stratosphere. This is provided as the total number of nitrogen dioxide molecules in the stratospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements) and solar zenith angle (removing data retrieved at high solar zenith angles). The filters applied are set to remove pixels based on the following: main data quality flag greater than 1 and solar zenith angle greater than 80 degrees.-Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.++References: TEMPO_NO2_L3_NRT [doi:10.5067/IS-40e/TEMPO/NO2_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L3.002);+TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.004](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.004)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.mdindex e71041c16..fbe31347c 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_NO2_Vertical_Column_Troposphere.md@@ -1,7 +1,10 @@-The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).+The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Nitrogen Dioxide Vertical Column Troposphere layer provides information on the amount of nitrogen dioxide in the troposphere. This is provided as the total number of nitrogen dioxide molecules in the tropospheric column of air above one square centimeter on the Earth’s surface (molecules/cm<sup>2</sup>).-Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels using the main data quality flag, and solar zenith angle variables.+Imagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR). The Level 3 product is regridded from the Level 2 product onto a 0.02º longitude x 0.02º latitude grid, and the imagery sampling is 2 km. The layer is filtered to remove low-quality pixels using the main data quality flag (removing low confidence measurements), solar zenith angle (removing data retrieved at high solar zenith angles), and effective cloud fraction (removing where clouds obscure the column) variables. The filters applied are set to remove pixels based on the following: main data quality flag greater than 1, effective cloud fraction greater than 0.5, and solar zenith angle greater than 80 degrees.-Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Nitrogen dioxide Level 3 files provide trace gas information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.003)\ No newline at end of file+TEMPO Near Real-Time (NRT) imagery is available approximately 3-4 hours after data retrieval. This imagery is replaced by the standard product imagery as it becomes available. TEMPO NRT data are produced using a fast version of the TEMPO baseline retrieval processor. The NRT processing optimizes radiance calibration, image navigation and registration, and cloud and trace gas retrievals for rapid processing, while ensuring that product quality is sufficient for most NRT applications.++References: TEMPO_NO2_L3_NRT [doi:10.5067/IS-40e/TEMPO/NO2_NRT_L3.002](https://doi.org/10.5067/IS-40e/TEMPO/NO2_NRT_L3.002);+TEMPO_NO2_L3 [doi:10.5067/IS-40e/TEMPO/NO2_L3.004](https://doi.org/10.5067/IS-40e/TEMPO/NO2_L3.004)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.mdindex 643b9a6fe..9ae63fa45 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Cloud_Fraction.md@@ -2,6 +2,6 @@ The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Cloud FImagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.-Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.mdindex 1e4900dee..feb1db59f 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_Column_Amount.md@@ -2,6 +2,6 @@ The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (L3) Ozone CImagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.-Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)\ No newline at end of file+References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)diff --git a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.mdindex 578163184..33417193c 100644--- a/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md+++ b/config/default/common/config/metadata/layers/tempo/TEMPO_L3_Ozone_UV_Aerosol_Index.md@@ -2,6 +2,6 @@ The Tropospheric Emissions: Monitoring of Pollution (TEMPO) Level 3 (l3) ultraviImagery is available as approximately one-hour scans for daylight hours over North America. The sensor’s native spatial resolution is ~2 km x 4.75 km at the center of TEMPO’s field of regard (FOR), the Level 3 product resolution is 0.02 x 0.02 degrees, and the imagery resolution is 2 km. The layer is filtered to display high-quality pixels with solar zenith angles less than 80 degrees.-Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted re-gridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.+Total ozone Level 3 files provide ozone and supporting information on a regular grid. Level 3 files are derived by combining information from all Level 2 files constituting a TEMPO East-West scan cycle, using an area-weighted regridding approach. The temporal resolution of a nominal scan is approximately one hour during daylight hours, with more frequent scans in the morning over the eastern portion of the FOR and in the evenings over the western portion of the FOR.-References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)\ No newline at end of file+References: TEMPO_O3TOT_L3 [doi:10.5067/IS-40e/TEMPO/O3TOT_L3.003](https://doi.org/10.5067/IS-40e/TEMPO/O3TOT_L3.003)