M-Film: film simulation for Canon EOS cameras with Magic Lantern. 72 film stocks (Portra, Velvia, Tri-X, CineStill…), a film-camera interface and an in-camera darkroom that develops your RAWs. 5D Mark III, 6D, 600D, 650D, 700D, EOS M and more.
| Name | Last commit message | Last commit date |
|---|---|---|
| .github | ||
| docs | ||
| ml-dev | ||
| .gitattributes 162 B | ||
| .gitignore 589 B | ||
| FILMS.md 15.5 KB | ||
| LICENSE 17.7 KB | ||
| PORTING.md 8.1 KB | ||
| README.md 17.5 KB | ||
| README.th.md 30.1 KB | ||
| TESTING.md 8.8 KB | ||
| THIRD_PARTY.md 2.0 KB | ||
| VERSION 6 B |
M-Film
Your Canon, shot like film.
A film camera's interface for Canon cameras that run Magic Lantern.
Load a roll from a shelf of 72 film stocks, shoot without looking at the screen, then develop the roll: in the camera, or on your computer with Darkrooms.
The camera side is free and open, for everyone.
English · ภาษาไทย · Films · Cameras · Darkrooms · Take it further
A film camera, inside your camera
M-Film replaces the camera's menus with a film camera drawn from scratch, with Magic Lantern running underneath. There is no picture on the screen after each shot and no going back through them: you shoot the roll, then develop it and see what you got.
![]() |
![]() |
| Load a roll. A shelf of canisters that turn to face you. Pick one and the leader comes out of it. | Count your frames. A film camera's frame counter, from S to the last frame of the roll. |
![]() |
![]() |
| Shoot. An SLR viewfinder over LiveView: aperture scale, light meter needle, red seven-segment frame count. | Develop in the camera. The darkroom develops the finished roll frame by frame, into JPEG folders on the card. |
![]() |
![]() |
| See the prints. A contact sheet of the roll, and each print full screen. | Home instead of the camera's menu: the roll you have loaded and everything else. |
Every RAW is kept, so nothing is lost: you can develop the same roll again with another film later.
Focusing a manual lens. Loading a roll sets the camera to the film's ISO, and LiveView shows the exposure the frame will get: with a slow film, or an adapted lens stopped down, it can be too dark to focus. Turn off Settings → Viewfinder → Exposure simulation and LiveView stays bright enough to focus, whatever the exposure. (Not on the 600D and 1100D: Magic Lantern can't set it there.)
How big the prints are
The camera's darkroom makes small prints, sized for the camera's screen, so it can develop a frame in the camera's little memory. For full-size photos, develop the same roll on your computer with Darkrooms. Your RAWs stay on the card, so you can develop the rolls you've already shot again, at full size.
| Horizontal frame | Vertical frame | |
|---|---|---|
| In the camera | 720 × 480 (0.35 MP) | 320 × 480 (0.15 MP) |
| Darkrooms on a computer | the full RAW, e.g. 5472 × 3648 (20 MP) on a 6D | the same, turned upright |
Full size in Darkrooms by camera, about: EOS M, 650D, 700D, 100D 5184 × 3456 · 6D 5472 × 3648 · 5D Mark III 5760 × 3840 · 5D Mark II 5616 × 3744.
Basic or Realistic
![]() |
![]() |
| Choose how real. Settings → System → Film mode. | Basic (the default): the last frame finishes the roll, and it goes straight to the darkroom. No rewinding. |
- Basic: shoot, then develop. Stop early with Finish roll on the Roll page.
- Realistic: like a real film camera. Rewind the roll before it can be developed.
- Either way the roll is the same on the card, so Darkrooms reads both.
On a DSLR: a top plate

A DSLR shoots through its optical viewfinder, so there is no LiveView to draw on. With a roll loaded and LiveView off, the back screen becomes a film camera's top plate:
- shutter, aperture and frame in big seven-segment digits
- the film and its ISO
- a light meter from −2 to +2 stops, and a bar of the frames left
- WIND ON when the next frame needs winding
It goes off when you put your eye to the viewfinder, and LiveView brings the viewfinder HUD back. New in 0.1.1, still waiting for a DSLR tester: see Cameras.
72 films
Colour negative, slide, black and white, and cinema film, on four shelves. Each film has its own colour, grain, halation and softness; rolls come in 36, 24 or 12 frames.
![]() Kodak Portra 400 Soft warm skin, gentle highlights |
![]() Kodak Gold 200 Golden hour, all day long |
![]() Kodak Ektar 100 Punchy colour, ultra fine grain |
![]() Fujicolor Superia 400 Green shadows, everyday snaps |
![]() Fujichrome Velvia 50 Vivid slide film, hard contrast |
![]() Kodak Kodachrome 64 Magazine colour of the 70s |
![]() CineStill 800T Tungsten cine film, night goes blue |
![]() Kodak Vision 2383 Cinema print: teal shadows |
![]() Kodak Tri-X 400 Gritty contrast, street classic |
All 72 films, on the same photo →
Colour for 63 of them comes from the Film-Luts collection; the rest
from M-Film's own film models (ml-dev/films/films.py).
Cameras
M-Film was made on the EOS M, where it works. It now builds for every camera on which Magic Lantern itself is mature (DIGIC 4 and 5). Testers have tried most of them now: the table says how far each one got, and what's still wrong. If you have one marked needs a tester, you can help: TESTING.md says how (about 20 minutes, and you can always go back).
| Camera | Canon firmware | Status | Notes | Card files |
|---|---|---|---|---|
| Canon EOS M | 2.0.2 | ✅ Works | M-Film-camera-EOSM.202.zip (to test: -module.zip) |
|
| Canon EOS 100D / Rebel SL1 / Kiss X7 | 1.0.1 | ✅ Works | Works since 0.1.5, the film OS as a module (#48). | M-Film-camera-100D.101.zip |
| Canon EOS 650D / Rebel T4i / Kiss X6i | 1.0.4 | ✅ Works | Works with the film OS as a module, darkroom included (#54). From 0.1.3 to 0.1.5 the plain zip came without the darkroom (with it built in, the 650D doesn't start: #34): in 0.1.5, take the -module.zip. |
M-Film-camera-650D.104.zip |
| Canon EOS 700D / Rebel T5i / Kiss X7i | 1.1.5 | ⚠️ Tried, known problem | 0.1.5's module build works on a tester's 700D, darkroom included (#19), but M-Film's and Canon's menus still glitch over each other; 0.1.6 holds Canon's screen as the film OS opens, and as it closes back to the HUD: reports wanted. From 0.1.3 to 0.1.5 the plain zip came without the darkroom: in 0.1.5, take the -module.zip. |
M-Film-camera-700D.115.zip |
| Canon EOS 6D | 1.1.6 | ✅ Works | Works since 0.1.2 (#17, #22). | M-Film-camera-6D.116.zip (to test: -module.zip) |
| Canon EOS 70D | 1.1.2 | ⚠️ Tried, known problem | 0.1.5 works on a tester's 70D, with the film OS as a module (#40); on another, Magic Lantern installs but the camera then starts Canon's own firmware (#58): more reports wanted. | M-Film-camera-70D.112.zip |
| Canon EOS 5D Mark III (firmware 1.1.3) | 1.1.3 | ⚠️ Tried, known problem | Starts and shoots; the in-camera darkroom couldn't find the RAWs (#31): fixed in 0.1.3. | M-Film-camera-5D3.113.zip (to test: -module.zip) |
| Canon EOS 5D Mark III (firmware 1.2.3) | 1.2.3 | ⚠️ Tried, known problem | Starts and shoots; the in-camera darkroom couldn't find the RAWs (#16, #37): fixed in 0.1.3. | M-Film-camera-5D3.123.zip (to test: -module.zip) |
| Canon EOS 550D / Rebel T2i / Kiss X4 | 1.0.9 | ✅ Works | Works since 0.1.5, the film OS as a module, darkroom included (#48, #50). | M-Film-camera-550D.109.zip |
| Canon EOS 600D / Rebel T3i / Kiss X5 | 1.0.2 | ✅ Works | Starts and shoots since 0.1.5, the film OS as a module (#46). The in-camera darkroom isn't confirmed on it yet; shoot with Image quality RAW. | M-Film-camera-600D.102.zip |
| Canon EOS 60D | 1.1.1 | ✅ Works | Works since 0.1.3 (#25). 0.1.5: Screen orientation for a broken hinge switch (#49). | M-Film-camera-60D.111.zip (to test: -module.zip) |
| Canon EOS 1100D / Rebel T3 / Kiss X50 | 1.0.5 | 🧪 Builds, needs a tester | The film OS as a module fits its boot memory (493,056 of 524,032 bytes). Needs a first tester. | M-Film-camera-1100D.105.zip |
| Canon EOS 500D / Rebel T1i / Kiss X3 | 1.1.1 | ✅ Works | Works (#44). 0.1.5 repaints the plate when Canon draws over it, but a slight flicker remains; 0.1.6 puts the plate together off-screen and puts back only what Canon drew over: does it still flicker? (#64) | M-Film-camera-500D.111.zip (to test: -module.zip) |
| Canon EOS 50D | 1.0.9 | ✅ Works | Works (#43). 0.1.5 repaints the plate when Canon draws over it, but a slight flicker may remain, as on the 500D; 0.1.6 puts the plate together off-screen and puts back only what Canon drew over: reports wanted in #64. | M-Film-camera-50D.109.zip (to test: -module.zip) |
| Canon EOS 5D Mark II | 2.1.2 | ⚠️ Tried, known problem | Most hang at power on: the build is too big at start-up (#18). 0.1.3 has a smaller one (some Magic Lantern features left out, the darkroom kept) and fixes the pink prints: waiting for testers. | M-Film-camera-5D2.212.zip (to test: -module.zip) |
Not yet: 7D (Magic Lantern's current source doesn't build it) · 200D, 750D, 77D, 80D, 7D Mark II, 5D Mark IV, 5DS R, 6D Mark II, 850D, M50, R, RP, R5, R6, SX70 HS, SX740 HS (Magic Lantern itself is still experimental on these).
✅ tried on the camera and works · 🧪 builds; waiting for someone to try it · 🔧 bigger than the memory Magic Lantern gets at boot there (why). The card files are in each
release. The list lives in ml-dev/cameras.txt; porting
notes in PORTING.md.
Putting it on the camera
- The camera needs exactly the Canon firmware in the table (MENU → last settings tab → Firmware ver.).
- Unzip the card files for your camera onto an SD card, put it in the camera and run Firmware ver. → update once. From then on M-Film starts with the camera from that card.
- In Canon's menu set Image quality to RAW (RAW+JPEG works too) and Image review to Off. The darkroom develops the RAWs: a frame shot as JPEG can't be developed.
- Full steps, and how to go back: TESTING.md. Building it yourself:
ml-dev/build_fork.sh <camera>.
Updating to a new version
Don't unzip a new version over the old one: files left from before can make the camera misbehave. Start from a clean card instead:
- Finish the roll and develop it, in the camera or with Darkrooms. A new install starts with no roll loaded.
- Copy your photos off the card (the
DCIMfolder), including the developed JPEG folders. - Format the card in the camera and choose to remove Magic Lantern.
- Unzip the new version onto the card, as on the first install.
- Put the card in the camera and run Firmware ver. → update again, then switch the camera on.
Your settings (film, screen colour, Film mode) go back to their defaults: set them again.
Develop on your computer: Darkrooms
The camera develops its rolls by itself, slowly. Darkrooms does it on your computer, fast. Plug the camera in (or put its card in a reader) and open Darkrooms. It finds the camera, shows every roll you shot with its film, and develops them at full resolution.
![]() |
![]() |
| Your rolls, each with its canister and a strip of its frames. Develop whole rolls or pick single frames. | The lights go red. Prints come out of the developer and hang on the line. |
![]() |
![]() |
| Lights on. Every roll gets a contact sheet and its own folder. | Full detail. Every pixel of the RAW, JPEG with 4:4:4 colour, EXIF kept, optional date stamp. |
Free, or Full
| Free | Darkrooms Full | |
|---|---|---|
| Rolls a day | 1, of up to 36 frames (the same roll again that day doesn't count) | as many as you like |
| Every film, full size, EXIF, contact sheets | ✓ | ✓ |
| Many rolls at once on every core | ✓ | |
| Price | free, with a Google account | US$2.99 a month or US$14.99 once (checkout shows your currency), updates included |
The camera's own darkroom stays free and unlimited. Darkrooms goes with your Google account: no key to type in or keep. Click the badge at the top right → Sign in with Google, then Get it monthly or Get it for life. After you pay, Darkrooms switches to Full by itself within a few seconds. One account works on two computers at a time (sign in on the other one with the same Google account). Cancel the monthly plan any time in the program (Manage the subscription): it stays on until the end of the month paid for. Privacy: your pictures never leave your computer.
Download
| Your computer | Get | Open it |
|---|---|---|
| Windows 10 / 11 | Darkrooms-windows-x64.zip |
Unzip, open the Darkrooms folder, run Darkrooms.exe. If Windows warns: More info → Run anyway. |
| Mac with Intel | Darkrooms-macos-intel.zip |
Unzip, drag to Applications and open it. The first time: System Settings → Privacy & Security → Open Anyway (macOS 14 and older: right-click → Open). |
| Mac with Apple silicon | Darkrooms-macos-apple-silicon.zip |
Same. |
From the Darkrooms releases (the newest is at the top). About 30–50 MB. The program isn't signed with Apple or Microsoft yet, hence the warning the first time.
Take it further
- Have one of the cameras above? TESTING.md: try it and tell us, so it can move to ✅.
- Another camera? PORTING.md says what moves easily (the Film OS screens), what has to be redone per camera (the Magic Lantern side), and how to go about it.
- Every screen and button of the camera side, and how it works inside (in Thai): docs/MANUAL.th.md.
- Something broken? Open an issue and paste what the gear icon → What does the computer see? shows.
- The films (looks, LUT list) are in
ml-dev/films/; the camera build bakes them in. - Darkrooms, the desktop program, is closed source and isn't in this repository.
Support
The camera side of M-Film is free and stays free. If it gave you a roll you like, you can buy the developer a coffee ☕.
License
This repository: GPL-2.0 (LICENSE), as the camera side builds on Magic Lantern. Darkrooms (the desktop program) is a separate, closed-source program under its own licence. Fonts, film LUTs and other parts: THIRD_PARTY.md. Not affiliated with Canon, Kodak, Fujifilm or any film maker.




















