Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python
3.6 KB
Raw Blame

3D printing

Choose one hull, one upper cover, one computer carrier and one camera option. Print each shared STL in the quantity shown, rather than downloading a separate copy for every wheel or axle position. The catalogue has 73 distinct STL files across all options.

With a one-piece hull and cover: 106 pieces for Pi + RealSense, 107 for Pi + Gemini, 108 for Jetson + RealSense, or 109 for Jetson + Gemini. Each split option adds one piece.

Jetson builders: print one JT01 and one JT02 in PETG. These different retaining tabs are included in the current archive and on the Jetson plate in both 3MF projects.

Ready-to-print 3MF plates

Download one project and open it in Bambu Studio. The quantities, part orientations, materials and automatic tree supports are already set. Choose the matching printer and your filament before slicing.

Project Hull and cover Common plates Computer: choose one Camera: choose one
H2S — 21 plates One piece each 1–17 18 Jetson or 19 Pi 20 Gemini or 21 RealSense
P1 / P2 — 24 plates Split hull and split cover 1–20 21 Jetson or 22 Pi 23 Gemini or 24 RealSense

The compact profile is published for P1S, P1P and P2S. Both projects include the two Jetson retaining tabs on the Jetson plate. The copies of shared spacers and wheels are already placed; do not multiply them again. Each plate uses one material.

Standard 0.20 mm settings, 0.4 mm nozzle, 15% gyroid for all parts and automatic tree supports. Keep the supplied orientations. For the split hull and cover, follow the epoxy and fastening steps in the assembly guide.

See every plate and its contents.

Material Parts
PETG Hull, motor supports, transmission, electronics carriers, camera inserts and LiDAR mounts
PLA Cover, bin, arm plate, arm and gripper body
TPU95A Tracks

Use the standard/default profile and 15% gyroid infill. Enable automatic tree supports with the default support settings.

The STL files are oriented for printing. The visual catalogue shows the material and quantity for every part; the CSV gives the exact filenames.

Choose the camera option

  • RealSense: one RealSense support insert.
  • Gemini: one flush insert and one window bezel. The thin straight bridges have been removed; the curved ends remain.

Current set

The hull is R92, the motor supports R90, the Gemini window bezel R89, and both computer carriers R87. Each filename and catalogue entry carries its own part revision. The arm plate geometry remains R22.

The split hull has been rebuilt from the current R92 native geometry. Choose the single hull or the two halves in the catalogue. Split-hull assembly and files.

Upper cover and outer track frames

Choose the two-piece cover for a smaller build volume. Its two integral dovetails assemble from above and are glued before fitting the cover.

Print the outer track frames separately, flat, on the front-right to rear-left diagonal. Their STLs are already rotated. See the bed placement diagram.

All 38 spacers are together on H2S plate 5 or P1 / P2 plate 8. Print four identical tensioner sliders and rotate each to match its assembly position.