Skip to content

armgit / moss

Public Imported from GitHub
0

MOSS: a small, mostly 3D-printed litter-picking rover. Cleaner streets, one maker at a time.

Python
3.1 KB
Raw Blame

Hardware

The current mechanical package is V0.6 / R92. Download CAD, STL & 3MF · Build guide. It contains individual STL files, editable Fusion source, STEP solid geometry, per-part revisions and attribution. Third-party electronics reference models remain in the internal integration assembly.

See the print catalogue, BOM and assembly guide. Choose the one-piece hull or the current R92 two-piece alternative. The two-piece native Fusion sources are supplied separately from the main one-piece CAD set.

bench/ retains the raw bench traces. The 20 September INA219 trace is not a motor-current measurement.

Custom battery

3S4P battery build tutorial — parts, photographs, wiring and assembly for the twelve-cell EVE 21700 pack, with a 15 A blade fuse, 12 AWG main leads and 14 AWG inline fuse-holder pigtails. The updated parts list specifies 130 mm heat-shrink and fishpaper. Rated 20 Ah from the cell specifications; assembled mass 910 g. Actual capacity and collection runtime still need measuring. Read the workshop disclaimer before considering this build.

Electronics prototypes

MOSS CORE V0.7 — Prototype is the single current community design review: editable KiCad files, component views, grouped BOM, connector guide, Gerbers and static review evidence. Updated 1 November 2026: black 82 × 79 mm rectangular layout, vertical battery/servo/speaker headers, large connector labels and a 74 × 71 mm chassis mounting pattern, new routing and combined Orange Pi clearance evidence. The integrated converter, six-wire motor connectors, consolidated Cytron link and H1 GND connection remain. Per-motor current sensing, fan outputs and the compact host-branch fuse remain. Not fabricated yet: not production-ready or hardware-qualified. Electrical, connector and real-load review is welcome. Hardware revision letters are reserved for fabricated iterations.

The matching V0.7 hull prototype provides STEP, STL, editable Fusion geometry and rebuild sources for the 74 × 71 mm fixings, five cable-tie bridges and divider notch. The updated wiring harness includes one six-wire cable per motor, the grouped Cytron link, a detachable STOP tail, an offline viewer and a prototype quotation package. These are V0.7 prototypes; they do not replace the released V0.6/R92 build.

MOSS Core V0.8 notes collect observations to revisit after testing the V0.7 prototype.

MOSS Core V1D is retained as the previous routed design review. Its assumptions and package are historical; it is not the current V0.7 design.

V1C is retained for traceability and must not be fabricated because of a physical-pin mapping error; see the critical erratum.